Search Results

Search found 5951 results on 239 pages for 'monitor calibration'.

Page 6/239 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Triple monitor setup in linux

  - by Brendan Abel

  I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

  Read the article

• problem with monitor

  - by misha nesterenko

  I have an Asus VB191T connected to notebook via DVI connector as secondary monitor. I am observing some problems on that monitor. Photo of a properly functioning screen: Photo of my Asus VB191T screen: So as you can see there are white lines on both sides of black ones. Resolution is set to the monitor's native resolution which is 1280x1024. The artifacts don't appear for every color, and they show up the clearest where there is black on a grey background. What could be wrong? The monitor itself? Perhaps the connector?

  Read the article

• Colors differ in the dual monitor

  - by becomingGuru

  I use a dual monitor. The colors appear entirely different on the new monitor than they do on my laptop. When you are selecting colors etc, to be included in a website design, it totally freaks me out. Is there no software solution that finds how the settings of one of the monitor is and puts that to the second one? Otherwise what all settings do I need to change manually on the second monitor to make it appear as it does on the laptop? Thanks in advance.

  Read the article

• Monitor utilities

  - by Adam Davis

  I'm a big fan of good monitor usage, but only currently use a few utilities to help me attain display nirvana across several systems and monitors. Part of this is due to not knowing what's available. Please list one monitor utility that you use and what it does for you per answer, and avoid duplicates - comment on and vote up the existing answers rather than adding a duplicate. Also, if there are existing questions that delve more specifically into one area of monitor utilities link that in a separate answer. -Adam

  Read the article

• Can I use a USB monitor (like Mimo) as a primary monitor?

  - by Eduardo Molteni

  I have an old PC in the den without Video Card (I have to remove it after it start failing). I access it through Remote Desktop. I don't want to invest in a new video card since the PC is old. If I buy a USB monitor I can use it as a secondary monitor in the main pc, and plug to the old PC when need. The question is: Does the USB monitor work during booting before the OS was loaded?

  Read the article

• Cork Board Solution to tack things up on top or to the side of a monitor

  - by Bela

  I'm trying to find some sort of physical product that would either go on the top or the side of an lcd monitor and give me space to tape/push-pin/post it note things for myself. In my head I am picturing an extra space above your monitor 6 inches tall that lets you tape/push pin things up in front of you. For random notes and things I want to keep track of, having them on the top/side of my monitor would keep the space on my desk itself clear, and they would be closer to my field of vision. Does something like this exist? Do I need to rig up something myself? EDIT This is the closest thing I can find so far http://www.unplggd.com/unplggd/diy-project/reverse-engineer-how-to-feel-up-your-monitor-048251

  Read the article

• How can I use my laptop's monitor as my PC's monitor?

  - by Randell

  My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux.

  Read the article

• Dell U271 monitor DisplayPort suddenly not working

  - by Amir Latif

  My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

  Read the article

• Does a portable secondary laptop LCD monitor exist?

  - by Dougnukem

  I'm looking to buy a portable secondary LCD monitor for my Macbook Pro, does anything like that exist? I found some laptops that provide a dual 15'' monitor solution (but it's already baked into the hardware). Also some ideas posted about creating this type of setup back in 2007. I'm looking for something that is as thin as a laptop LCD (with maybe a bulky power supply that I could easily daisy chain or plug into a power strip along with my laptop). How difficult would it be to buy a 17'' laptop screen and hook up a DVI connector and power supply, and build a simple monitor stand for it? I've gotten to used to a dual-monitor setup at work and at home with my laptop that having to use my laptop in single-screen mode makes me feel crippled.

  Read the article

• How may I monitor all gestures of the entire system

  - by Jiulong Zhao

  I can make a view to accept touch event and receive detailed gesture event like this: [self setAcceptsTouchEvents:YES]; // NSSet *touches = [event touchesMatchingPhase:NSTouchPhaseBegan inView:self]; I can also receive global event by crate a monitor in this way: NSUInteger eventMasks = NSEventTypeBeginGesture | NSEventTypeEndGesture | NSEventMaskGesture; [NSEvent addGlobalMonitorForEventsMatchingMask:eventMasks handler:^(NSEvent *theevent) {//do something}]; But I can NOT get the detailed event from monitor by -touchesMatchingPhase How may I monitor all gestures of the entire system.

  Read the article

• Remote access not working without connected monitor

  - by winSharp93

  I am trying to configure a Windows Server 2008 as a Home Server for my personal use (mainly for storing documents, hosting source-control, etc.). The "server" consists of an Intel Atom 2700DC board and an Intel SSD. Configuring remote access to the server, I am confronted with a very strange problem: As long as a monitor is connected to my server, remote access works without any problems. However, when no monitor is connected at boot-time, remote access simply won't work (I keep getting errors when trying to connect that the remote server was not found or that remote access is disabled). Windows definitely boots when no monitor is connected as I receive a message asking me whether to enter safe mode when booting after powering the server down by plugging the power cord. When I plug in a monitor after boot, it stays turned off and remote desktop connections still fail. Do you have any ideas about what I could try?

  Read the article

• How can I use my laptop's monitor as my PC's ONLY monitor? (please vote to reopen) [closed]

  - by Randell

  Please vote to reopen. This is different from Can I use my laptop as a second monitor for my desk computer?, because that question is asking how to use the laptop screen as the secondary display, not as the only display. My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux. Edit: Both machines are connected to the same wireless network. PC needs to log in before it can connect to the network if I'm not mistaken.

  Read the article

• test monitor by looking at it using a camera (to check for waves)

  - by Omu

  I've been told that you can use a camera to look on the monitor and see whether there are some waves on the screen; that would be a way to check if the monitor is good or not. Is this true ? I'm looking at my monitor with a mobile phone camera and I see some vertical waves going (if there is a white background)

  Read the article

• Linux compatible touchscreen monitor

  - by jrtokarz

  Can anybody recommend a linux compatible touchscreen monitor, the criteria are: 19inch or greater 1920x1080 or better only single touch required be able to operate in portait mode We currently have some IIyama Prolite MTS2250MS monitors but these do not natively support portait mode and we have had little success getting the touch functionality working in Linux (although they do report themselves as HID devices when plugged in). So an alternative to suggesting a monitor would be pointers to information on how we could get the IIyama monitor working in Linux.

  Read the article

• Linux: Automatically switch to external monitor (VGA)

  - by peoro

  I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find. If it matters my system is like this: Archlinux Linux 2.6.36 Xorg 7.6 X server 1.9.2 Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules) When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr. Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?

  Read the article

• Triple monitor setup in linux

  - by Brendan Abel

  I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

  Read the article

• second monitor wont display

  - by Ryan

  hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

  Read the article

• After turning my monitor off and on, it will display only a white screen

  - by Narf the Mouse

  About a month after installing a new graphics card, I started encountering a rather frustrating problem. Namely, if I turn my monitor off for any significant length of time, then turn it back on, it displays only a white screen. Previously, restarting could fix the problem. However, after leaving the computer off last night, the problem persists. An internet search turned up this site; however, the monitor cable is not loose. As for the insides of the monitor - Well, I could poke around, but I risk making it worse if it's not the monitor. Any such instructions should be clear, detailed and include pictures. Further updates as events warrant.

  Read the article

• Viewsonic Monitor Resolution - Drivers are not working

  - by ravidev

  I have Viewsonic va1716w monitor which has VGA/D-SUB video input. I bought new Motherboard Intel DH67GD which has HDMI & DVI output. I connect my motherboard to monitor using DVI to VGA connector. It's working. Yesterday I installed windows 7 OS and also installed monitor drivers(downloaded from viewsonic site - signed version) When i set display resolution to 1440 x 900. It's not setting it.it sets back to 800x600. What should i do to make resolution to 1440x900 (monitor resolution)? DVI to VGA causing this problem or i need to do any trick? Any link to download drivers Please guide me.. Thanks in advance !!

  Read the article

• second monitor wont display [closed]

  - by Ryan

  hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

  Read the article

• AA doesn't work due to monitor?

  - by MikeQ

  I have a monitor (with TV tuner - Philips 221T1SB), native resolution of 1920x1080, but there is an Overscan in Catalyst. It says from left to right '10%' and '0%', if i set it (all the way to the left) on 10%, i get screen with black borders (you know what i mean), but if i set it to 0%, i get a filled monitor. It does make sense, but why the hell is there such an option? I never had any AA issues before, but now, with this monitor, here they go. I can't find any solution, i have only one lead = overscan, or pretty much anything with the CCC settings. Yes, i almost forgot. After a bit of trying to configure the monitor with remote, i found there is a PC channel option, few other channels, and then a HDMI option. I have monitor through HDMI, but why i get black screen when i select the PC channel? That might be another problem. I tried almost everything. Please guys, give me a hand. I don't want jaggies! CPU: Intel I5-750 @4,0GHz RAM: Corsair Vengeance 8GB 1600MHz GPU: AMD Gigabyte HD 7950 Windforce @1100/1400, 1,174V Motherboard: ASUS P7P55D-E EVO

  Read the article

• Viewsonic monitor keeps showing its on-screen menu incessantly

  - by markvgti

  Since yesterday my Viewsonic 22" monitor (VX2255wmb) keeps showing its on-screen menu incessantly, without my touching any of its buttons. The menu comes on in the centre of the screen, stays on for 8-10 seconds, disappears for a second or two, then repeats the cycle. This happens whenever there's a signal being sent to the monitor. I can't actually navigate the menu when it appears on-screen. Pressing the power button, or the Up and Down buttons on its right edge dismiss the menu, only for it to reappear again. These symptoms have appeared before, but earlier they'd stop after 5-10 mins. The power button on the monitor has always been iffy, but now it doesn't seem to be working at all--have to switch off power supply from mains when I leave my desk. Using DVI input on this monitor as my HP desktop has DVI output.

  Read the article

• After turning off my monitor, the computer won't display again

  - by Nick Lassonde

  If I physically turn off the monitor (DVI connection) and then turn it back on, the connection does not wake back up. The monitor enters "Power Saving" mode. I've tried unplugging the DVI cable and plugging back in, I've tried updating the video card drivers (it's Windows Vista; Windows 7 failed to install on this machine). I can use VNC to connect to the machine again, and after a reboot, the monitor works again. Does anyone have any idea?

  Read the article

• performance monitor in iis 7 to monitor which website is using most resources (asp.net)

  - by Karl Cassar

  I am using Windows Server 2008 R2 and IIS 7.5, and am hosting multiple websites on the same webserver. Is it possible to use Performance Monitor to know on average which website is using the most resources? I've added a user-defined Data Collector Set in Performance Monitor collecting data for 1 day. However, I could not find any details which hint which website is using the most resources. Which counters are crucial to monitor websites? The generated report tells me that the top process is w3wp##1 - how can I know which website it corresponds to? I've also tried to add counters for ASP.Net Applications for all object instances, however % Managed Processor Time (estimated) is 0 at all times.

  Read the article

• Windows 7 changes desktop icon location when switching from External Monitor to Internal Monitor (laptop)

  - by Gareth Jones

  I have a Windows 7 Laptop, and lately its been acting really weird with my 1080p Monitor. When I get home from school, Ill plug my screen in, and close my laptop lid (which makes the laptop treat the Monitor as the primary and only screen). However it will move my desktop icons! This also happens when I remove / unplug the screen, as shown in the pictures. I hate this, as Im the kinda person who's use to every icon being in a set spot, and so am use to their location. Its a massive hassle to try and move the icons back to their original spot. Anyone have any ideas on how to fix this? Thanks P.S it could be due to the resolution of the screen's being different, but this never happened before in the past Icons on External Moniter (after having moved them manually back into place): Icons after unplugging external monitor (and so using Laptop screen):

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >