Search Results

Search found 150 results on 6 pages for 'mq'.

Page 6/6 | < Previous Page | 2 3 4 5 6 

• Wait for a single RabbitMQ message with a timeout

  - by Evgeny

  I'd like to send a message to a RabbitMQ server and then wait for a reply message (on a "reply-to" queue). Of course, I don't want to wait forever in case the application processing these messages is down - there needs to be a timeout. It sounds like a very basic task, yet I can't find a way to do this. I've now run into this problem with both py-amqplib and the RabbitMQ .NET client. The best solution I've got so far is to poll using basic_get with sleep in-between, but this is pretty ugly: def _wait_for_message_with_timeout(channel, queue_name, timeout): slept = 0 sleep_interval = 0.1 while slept < timeout: reply = channel.basic_get(queue_name) if reply is not None: return reply time.sleep(sleep_interval) slept += sleep_interval raise Exception('Timeout (%g seconds) expired while waiting for an MQ response.' % timeout) Surely there is some better way?

  Read the article

• activemq-maven-plugin ignore files in classpath?

  - by Oscar Chan

  I have been trying to get activemq-maven-plugin to run activemq with configuration in classpath of the bundle. However, I don't have much luck. It seems that the activemq-maven-plugin just ignore resources (resources/main/conf/activemq.properties) the local bundle. I checked the jar and target/classes and they are built into the right local. I am able to get plugin to run (mvn activemq:run) if I take out the PropertyPlaceholderConfigurer bean in the activemq.xml Did I do anything wrong? Here is the output [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Failed to start ActiveMQ Broker Embedded error: Could not load properties; nested exception is java.io.FileNotFoundException: class path resource [conf/activemq.properties] cannot be opened because it does not exist [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 2 seconds [INFO] Finished at: Mon May 03 15:56:05 PDT 2010 [INFO] Final Memory: 11M/79M [INFO] ------------------------------------------------------------------------ Here is the pom.xml, which I specific the plugin to look up activemq.xml via file, that works. However, in the activemq.xml <?xml version="1.0"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>oc.test</groupId> <artifactId>mq</artifactId> <version>0.1</version> <name>mq</name> <url>http://maven.apache.org</url> <dependencies> <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <version>3.8.1</version> <scope>test</scope> </dependency> </dependencies> <build> <plugins> <plugin> <groupId>org.apache.activemq.tooling</groupId> <artifactId>maven-activemq-plugin</artifactId> <version>5.3.1</version> <configuration> <configUri>xbean:file:src/main/resources/conf/activemq.xml</configUri> <fork>false</fork> <systemProperties> <property> <name>javax.net.ssl.keyStorePassword</name> <value>password</value> </property> <property> <name>org.apache.activemq.default.directory.prefix</name> <value>./target/</value> </property> </systemProperties> </configuration> <dependencies> <dependency> <groupId>org.springframework</groupId> <artifactId>spring</artifactId> <version>2.5.5</version> </dependency> </dependencies> </plugin> </plugins> </build> </project> Here is the src/main/resources/conf/activemq.xml <?xml version="1.0"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:amq="http://activemq.apache.org/schema/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core.xsd "> <bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer"> <property name="locations"> <value>classpath:conf/activemq.properties</value> </property> <property name="systemPropertiesModeName" value="SYSTEM_PROPERTIES_MODE_OVERRIDE"/> </bean> <broker xmlns="http://activemq.apache.org/schema/core" brokerName="localhost" dataDirectory="./data"> <!-- The transport connectors ActiveMQ will listen to --> <transportConnectors> <transportConnector name="openwire" uri="tcp://localhost:61616"/> </transportConnectors> </broker> </beans> Here is the src/main/resources/conf/activemq.properties activemq.port=61616

  Read the article

• qemu-kvm virtual machine virtio network freeze under load

  - by Rick Koshi

  I'm having a problem with my virtual machines, where the network will freeze under heavy load. I'm using CentOS 6.2 as both host and guest, not using libvirt, just running qemu-kvm directly as follows: /usr/libexec/qemu-kvm \ -drive file=/data2/vm/rb-dev2-www1-vm.img,index=0,media=disk,cache=none,if=virtio \ -boot order=c \ -m 2G \ -smp cores=1,threads=2 \ -vga std \ -name rb-dev2-www1-vm \ -vnc :84,password \ -net nic,vlan=0,macaddr=52:54:20:00:00:54,model=virtio \ -net tap,vlan=0,ifname=tap84,script=/etc/qemu-ifup \ -monitor unix:/var/run/vm/rb-dev2-www1-vm.mon,server,nowait \ -rtc base=utc \ -device piix3-usb-uhci \ -device usb-tablet /etc/qemu-ifup (used by the above command) is a very simple script, containing the following: #!/bin/sh sudo /sbin/ifconfig $1 0.0.0.0 promisc up sudo /usr/sbin/brctl addif br0 $1 sleep 2 And here's the info on br0 and other interfaces: avl-host3 14# brctl show bridge name bridge id STP enabled interfaces br0 8000.180373f5521a no bond0 tap84 virbr0 8000.525400858961 yes virbr0-nic avl-host3 15# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:1e brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:20 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 7: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet 172.16.1.46/24 brd 172.16.1.255 scope global br0 inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 8: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 9: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 500 link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff 12: tap84: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether ba:e8:9b:2a:ff:48 brd ff:ff:ff:ff:ff:ff inet6 fe80::b8e8:9bff:fe2a:ff48/64 scope link valid_lft forever preferred_lft forever bond0 is a bond of em1 and em2. virbr0 and virbr0-nic are vestigial interfaces left over from CentOS's default installation. They are unused (as far as I know). The guest runs perfectly until I run a large 'rsync', when the network will freeze after some seemingly-random time (usually under a minute). When it freezes, there is no network activity in or out of the guest. I can still connect to the guest's console via vnc, but it is unable to speak out its network interface. Any attempt to 'ping' from the guest gives a "Destination Host Unreachable" error for 3/4 packets and no reply for every fourth packet. Sometimes (perhaps two thirds of the time), I can bring the interface back to life by doing a "service network restart" from the guest's console. If this works (and if I do it before the rsync times out), the rsync will resume. Usually it will freeze again within a minute or two. If I repeat, the rsync will eventually finish, and I presume the machine goes back to waiting for another period of heavy load. Throughout the whole process, there are no console errors or relevant (that I can see) syslog messages on either guest or host machine. If the "service network restart" doesn't work the first time, trying again (and again and again) never seems to work. The command completes normally, with normal output, but the interface stays frozen. However, a soft reboot of the guest machine (without restarting qemu-kvm) always seems to bring it back. I am aware of the "lowest mac address" assignment problem, where the bridge takes on the mac address of the slave interface with the lowest mac address. This causes temporary network freezes, but is definitely not what's happening for me. My freezes are permanent until manual intervention, and you can see from the 'ip addr show' output above that the mac address being used by br0 is that of the physical ethernet. There are no other virtual machines running on the host. I've verified that each virtual machine on the subnet has its own unique mac address. I have rebuilt the guest machine several times, and I have tried this on three different host machines (identical hardware, built identically). Oddly, I do have one virtual host (the second of this series) which never seemed to have a problem. It never had its network freeze when it was running the same rsync during its build. It's particularly odd because it was the second build. The first, on a different host, did have the freezing problem, but the second did not. I assumed at the time that I had done something wrong with the first build, and that the problem was resolved. Unfortunately, the problem reappeared when I built the third VM. Also unfortunately, I can't do many tests with the working VM, as it's now in production use, and I'm hoping I can find the cause of this issue before that machine starts having problems. It's possible that I just got really lucky while running the rsync on the working machine, and that one time it didn't freeze. Of course it's possible that I somehow changed the build scripts without realizing it and re-broke something, but I can't find any such thing. In any case, I'm hoping someone has some idea what could cause this. Addendum: Preliminary tests suggest that I don't have the problem if I substitute e1000 for virtio in the first -net flag to qemu-kvm. I don't consider this a solution, but it is suitable for a stopgap. Has anyone else had (or better yet, solved) this problem with the virtio network driver?

  Read the article

• .net Connectivity to mainframe

  - by vinod

  Can any one please suggest me the best approach to connect to mainframe from .net. I have to develop an web application, in which i have to follow NIEM standards for data exchange between two end clients. the interface i have to develop will be on .net. i don't have any knowledge on mainframe, i have come across that there are ODBC connectivity/ MQ series. i'm afraid which approach to follow on as i have less knowledge on the mainframe system. any suggestion would be really helpfully to me. any article , links or sample code will be greatly appreciated Thanks

  Read the article

• What is the best to format messages for queueing?

  - by Tijmen

  I've been reading up on message queueing lately, and I'd like to implement a simple, extendable, system for my app. While there's a lot of good information on the subject of setting up a MQ system out there, I can't find a lot about the actual implementation. I'm looking for patterns and best practices on how to properly format messages for a queue, and ways to execute the jobs in PHP. Should I use JSON, serialized objects, text, URLs or XML? What information should I send? Is a worker with a switch($job['command']) {} (or something like that) the way to go, or are there any established patterns out there to implement a worker? Help greatly appreciated!

  Read the article

• GlassFish Back from Devoxx 2011 Mature Java EE 6 and EE 7 well on its way

  - by alexismp

  I'm back from my 8th (!) Devoxx conference (I don't think I've missed one since 2004) and this conference keeps delivering on the promise of a Java developer paradise week. GlassFish was covered in many different ways and I was not involved in a good number of them which can only be a good sign! Several folks asked me when my Java EE 6 session with Antonio Goncalves was scheduled (we've been covering this for the past two years in University sessions, hands-on labs and regular sessions). It turns out we didn't team up this year (Antonio was crazy busy preparing for Devoxx France) and I had a regular GlassFish session. Instead, this year, Bert Ertman and Paul Bakker covered the 3-hour Java EE 6 University session ("Duke’s Duct Tape Adventures") on the very first day (using GlassFish) with great success it seems. The Java EE 6 lab was also a hit with a full room of folks covering a lot of technical ground in 2.5 hours (with GlassFish of course). GlassFish was also mentioned during Cameron Purdy's keynote (pretty natural even if that surprised a number of folks that had not been closely following GlassFish) but also in Stephan Janssen's Keynote as the engine powering Parleys.com. In fact Stephan was a speaker in the GlassFish session describing how they went from a single-instance Tomcat setup to a clustered GlassFish + MQ environment. Also in the session was Johan Vos (of Mollom fame, along other things). Both of these customer testimonials were made possible because GlassFish has been delivering full Java EE 6 implementations for almost two years now which is plenty of time to see serious production deployments on it. The Java EE Gathering (BOF) was very well attended and very lively with many spec leads participating and discussing progress and also pain points with folks in the room. Thanks to all those attending this session, a good number of RFE's, and priority points came out of this. While this wasn't a GlassFish session by any means, it's great to have the current RESTful Admin and upcoming Java EE 7 planned features be a satisfactory answer to some of the requests from the attendance. Last but certainly not least, the GlassFish team is busy with Java EE 7 and version 4 of the product. This was discussed and shown during the Java EE keynote and in greater details in Jerome Dochez' session. If any indication, the tweets on his demo (virtualization, provisioning, etc...) were very encouraging. Java EE 6 adoption is doing great and GlassFish, being a production-quality reference implementation, is one of the first to benefit from this. And with GlassFish 4.0, we're looking at increasing the product and community adoption by offering a pragmatic technical solution to Java EE PaaS deployments. Stay tuned ! (the impatient in you is encouraged to grab a 4.0 build and provide feedback).

  Read the article

• Configure IIS Web Site for alternate Port and receive Access Permission error

  - by Andrew J. Brehm

  When I configure IIS to run a Web site on Port 1414, I get the following error: --------------------------- Internet Information Services (IIS) Manager --------------------------- The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020) However, as according to netstat the port is not in use. Completely aside from IIS, I wrote a test program (just to open the port and test it): TcpListener tcpListener; tcpListener = new TcpListener(IPAddress.Any, port); try { tcpListener.Start(); Console.WriteLine("Press \"q\" key to quit."); ConsoleKeyInfo key; do { key = Console.ReadKey(); } while (key.KeyChar != 'q'); } catch (Exception ex) { Console.WriteLine(ex.Message); } tcpListener.Stop(); The result was an exception and the following ex.Message: An attempt was made to access a socket in a way forbidden by its access permissions The port was available but its "access permissions" are not allowing me access. This remains after several restarts. The port is not reserved or in use as far as I know and while IIS says it is in use, netstat and my test program say it is not and my test program receives the error that I am not allowed to access the port. The test program ran elevated. The IIS Site is running MQSeries, but the MQ listener also cannot start on port 1414 because of this issue. A quick search of my registry found nothing interesting for port 1414. What are socket access permissions and how can I correct mine to allow access?

  Read the article

• Problem in creation MDB Queue connection at Jboss StartUp

  - by Amit Ruwali

  I am not able to create a Queue connection in JBOSS4.2.3GA Version & Java1.5, as I am using MDB as per the below details. I am putting this MDB in a jar file(named utsJar.jar) and copied it in deploy folder of JBOSS, In the test env. this MDB works well but in another env. [ env settings and jboss/java ver is same ] it is throwing error at jboss start up [attached below ]. I have searched for this error but couldn't find any solution till now; was there any issue of port confict or something related with configurations ? UTSMessageListner.java @MessageDriven(activationConfig = { @ActivationConfigProperty(propertyName="destinationType", propertyValue="javax.jms.Queue"), @ActivationConfigProperty(propertyName="destination", propertyValue="queue/UTSQueue") }) @TransactionAttribute(TransactionAttributeType.NOT_SUPPORTED) public class UTSMessageListner implements MessageListener { public void onMessage(Message msg) { ObjectMessage objmsg = (ObjectMessage) msg; try { UTSListVO utsMessageListVO = (UTSListVO) objmsg.getObject(); if(utsMessageListVO.getUtsMessageList()!=null) { UtsWebServiceLogger.logMessage("UTSMessageListner:onMessage: SIZE Of UTSMessage List =[" +utsMessageListVO.getUtsMessageList().size() + "]"); UTSDataLayerImpl.getInstance().insertUTSMessage(utsMessageListVO); } else { UtsWebServiceLogger.logMessage("UTSMessageListner:onMessage: Message List is NULL"); } } catch (Exception ex) { UtsWebServiceLogger.logMessage("UTSMessageListner:onMessage: Error Receiving Message"+ExceptionUtility.getStackTrace(ex)); } } } [ I have also attached whole server.log as an attach] /// ///////////////////////////////// Error Trace is Below while starting the server /////////////////////////// 2010-03-12 07:05:40,061 WARN [org.jboss.ejb3.mdb.MessagingContainer] Could not find the queue destination-jndi-name=queue/UTSQueue 2010-03-12 07:05:40,061 WARN [org.jboss.ejb3.mdb.MessagingContainer] destination not found: queue/UTSQueue reason: javax.naming.NameNotFoundException: queue not bound 2010-03-12 07:05:40,061 WARN [org.jboss.ejb3.mdb.MessagingContainer] creating a new temporary destination: queue/UTSQueue 2010-03-12 07:05:40,071 WARN [org.jboss.system.ServiceController] Problem starting service jboss.j2ee:ear=uts.ear,jar=utsJar.jar,name=UTSMessageListner,service=EJB3 java.lang.NullPointerException at org.jboss.mq.server.jmx.DestinationManager.createDestination(DestinationManager.java:336) at org.jboss.mq.server.jmx.DestinationManager.createQueue(DestinationManager.java:293) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.ejb3.JmxClientKernelAbstraction.invoke(JmxClientKernelAbstraction.java:44) at org.jboss.ejb3.jms.DestinationManagerJMSDestinationFactory.createDestination(DestinationManagerJMSDestinationFactory.java:75) at org.jboss.ejb3.mdb.MessagingContainer.createTemporaryDestination(MessagingContainer.java:573) at org.jboss.ejb3.mdb.MessagingContainer.createDestination(MessagingContainer.java:512) at org.jboss.ejb3.mdb.MessagingContainer.innerCreateQueue(MessagingContainer.java:438) at org.jboss.ejb3.mdb.MessagingContainer.jmsCreate(MessagingContainer.java:400) at org.jboss.ejb3.mdb.MessagingContainer.innerStart(MessagingContainer.java:166) at org.jboss.ejb3.mdb.MessagingContainer.start(MessagingContainer.java:152) at org.jboss.ejb3.mdb.MDB.start(MDB.java:126) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.ejb3.ServiceDelegateWrapper.startService(ServiceDelegateWrapper.java:103) at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:289) at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:245) at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:978) at $Proxy0.start(Unknown Source) at org.jboss.system.ServiceController.start(ServiceController.java:417) at sun.reflect.GeneratedMethodAccessor10.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy53.start(Unknown Source) at org.jboss.ejb3.JmxKernelAbstraction.install(JmxKernelAbstraction.java:120) at org.jboss.ejb3.Ejb3Deployment.registerEJBContainer(Ejb3Deployment.java:301) at org.jboss.ejb3.Ejb3Deployment.start(Ejb3Deployment.java:362) at org.jboss.ejb3.Ejb3Module.startService(Ejb3Module.java:91) at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:289) at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:245) at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:978) at $Proxy0.start(Unknown Source) at org.jboss.system.ServiceController.start(ServiceController.java:417) at sun.reflect.GeneratedMethodAccessor10.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy33.start(Unknown Source) at org.jboss.ejb3.EJB3Deployer.start(EJB3Deployer.java:512) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:133) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:142) at org.jboss.mx.interceptor.DynamicInterceptor.invoke(DynamicInterceptor.java:97) at org.jboss.system.InterceptorServiceMBeanSupport.invokeNext(InterceptorServiceMBeanSupport.java:238) at org.jboss.wsf.container.jboss42.DeployerInterceptor.start(DeployerInterceptor.java:87) at org.jboss.deployment.SubDeployerInterceptorSupport$XMBeanInterceptor.start(SubDeployerInterceptorSupport.java:188) at org.jboss.deployment.SubDeployerInterceptor.invoke(SubDeployerInterceptor.java:95) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy34.start(Unknown Source) at org.jboss.deployment.MainDeployer.start(MainDeployer.java:1025) at org.jboss.deployment.MainDeployer.start(MainDeployer.java:1015) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:819) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:782) at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:133) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:142) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy9.deploy(Unknown Source) at org.jboss.deployment.scanner.URLDeploymentScanner.deploy(URLDeploymentScanner.java:421) at org.jboss.deployment.scanner.URLDeploymentScanner.scan(URLDeploymentScanner.java:634) at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymentScanner.java:263) at org.jboss.deployment.scanner.AbstractDeploymentScanner.startService(AbstractDeploymentScanner.java:336) at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:289) at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:245) at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:978) at $Proxy0.start(Unknown Source) at org.jboss.system.ServiceController.start(ServiceController.java:417) at sun.reflect.GeneratedMethodAccessor10.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.server.Invocation.invoke(Invocation.java:86) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy4.start(Unknown Source) at org.jboss.deployment.SARDeployer.start(SARDeployer.java:304) at org.jboss.deployment.MainDeployer.start(MainDeployer.java:1025) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:819) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:782) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:766) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94) at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:133) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:142) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659) at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:210) at $Proxy5.deploy(Unknown Source) at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:482) at org.jboss.system.server.ServerImpl.start(ServerImpl.java:362) at org.jboss.Main.boot(Main.java:200) at org.jboss.Main$1.run(Main.java:508) at java.lang.Thread.run(Thread.java:595)

  Read the article

• SJS AS 9.1 U2 (GF v2 U2) - Patch 25 // GF v2.1 - Patch 19 // Sun GlassFish Enterprise Server v2.1.1 Patch 13

  - by arungupta

  SJS AS 9.1 U2 (GF v2 U2) patch 25 is a commercial (Restricted) patch (see Overview of GFv2) available as part of Oracle's Commercial Support for GlassFish. This release is also patch 19 of GlassFish 2.1 and patch 13 of GlassFish 2.1.1. The file-based patches were released onSep 1, 2011; package-based patches were released on Sep 13, 2011. Release Overview Description SJS AS 9.1 U2 (GFv2 U2) - Patch 25 - File and Package-Based Patch for Solaris SPARC, Solaris x86, Linux, Windows and AIX. GlassFish 2.1 - Patch 19 - File and Package-Based Patch for Solaris SPARC, Solaris x86, Linux, Windows and AIX. GlassFish 2.1.1 - Patch 13 - File and Package-Based Patch for Solaris SPARC, Solaris x86, Linux, Windows and AIX. Patch Ids This release comes in 3 different variants: Package-based patches with HADB • Solaris SPARC - [128640-27] • Solarix i586 - [128641-27] • Linux RPM - [128642-27] File-based patches with HADB • Solaris SPARC - [128643-27] • Solaris i586 - [128644-27] • Linux - [128645-27] • Windows - [128646-27] File based patches without HADB • Solaris SPARC - [128647-27] • Solaris i586 - [128648-27] • Linux - [128649-27] • Windows - [128650-27] • AIX - [137916-27] Update Date Nov 23, 2011 Comment Commercial (for-fee) release with regular bug fixes. This is patch 25 for SJS AS 9.1 U2; it is also patch 19 for GlassFish v2.1 and patch 13 for GlassFish v2.1.1. It contains the fixes from the previous patches plus fixes for 18 unique defects. Status CURRENT Bugs Fixed in this Patch: • [12823919]: RESPONSE BYTECHUNK FLUSH WILL GENERATE A MIMEHEADER WHEN SESSION REPLICATION ON • [12818767]: INTEGRATE NEW GRIZZLY 1.0.40 • [12807660]: BUILD, STAGE AND INTEGRATING HADB • [12807643]: INTEGRATE MQ 4.4 U2 P4 • [12802648]: GLASSFISH BUILD FAILED DUE TO METRO INTEGRATION • [12799002]: JNDI RESOURCE NOT ENABLED IF TARGETTING USING ADMIN GUI ON GF 2.1.1 PATCH 11 • [12794672]: ORG.APACHE.JASPER.RUNTIME.BODYCONTENTIMPL DOES NOT COMPACT CB BUFFER • [12772029]: BUG 12308270 - NEED HOTFIX FROM GF RUNNING OPENSSO • [12749346]: VERSION CHANGES FOR GLASSFISH V2.1.1 PATCH 13 • [12749151]: INTEGRATING METRO 1.6.1-B01 INTO GF 2.1.1 P13 • [12719221]: PORTUNIFICATION WSTCPPROTOCOLFINDER.FIND NULLPOINTEREXCEPTION THROWN • [12695620]: HADB: LOGBUFFERSIZE CALCULATED INCORRECTLY FOR VALUES 120 MB AND THE MEMORY FO • [12687345]: ENVIRONMENT VARIABLE PARSING FOR SUN_APPSVR_NOBACKUP CAN FAIL DEPENDING ENV VARS • [12547651]: GLASSFISH DISPLAY BUG • [12359965]: GEREQUESTURI RETURNS URI WITH NULL PREPENDED INTERMITTENT AFTER UPGRADE • [12308270]: SUNBT7020210 ENHANCE JAXRPC SOAP RESPONSE USE PREVIOUS CONFIGURED NAMESPACE PREF • [12308003]: SUNBT7018895 FAILURE TO DEPLOY OR RUN WEBSERVICE AFTER UPDATING TO GF 2.1.1 P07 • [12246256]: SUNBT6739013 [RN]GLASSFISH/SUN APPLICATION INSTALLER CRASHES ON LINUX Additional Notes: More details about these bugs can be found at My Oracle Support.

  Read the article

• XMPP and Android interaction

  - by Ameya Phadke

  I am currently finding about how to build a XMPP client application on android 2.0.I came across this link which somewhat talks about the same problem.I am a newbie to android dev and thus found the solution given there to be difficult to digest. The system currently has Active MQ as a JMS provider.My job is to fed the messages coming from JMS to the XMPP server and then develope XMPP client on android 2.0 which will listen and show notification to the events pushed by the server. I have following concerns(which might sound foolish) 1.How do I push the events from JMS to the XMPP server which will in turn push them on android? 2.Which XMPP server implementation I should use?I have 3 options * Openfire: Very mature (was a commercial product), but sounds like it's heavyweight, written in Java * Prosody: Lightweight and easy to use, written in Lua. Doesn't have PubSub module yet * Tigase: Also lightweight, written in Java, supports PubSub How do I test and setup these servers.Do I need PubSub funcationality for my app? 3.For XMPP client I came across Smack API given here which is updated like 2 years back.Can anyone please tell me how do I make use of it for Android 2.0.If possible can anyone please mail me latest working Smack jar files. Thanks, Ameya

  Read the article

• jvm version for Websphere 6.1.0.23on Solaris

  - by dr jerry

  Hi I'm at big financial institute and we've an application running on Websphere 6.1. on Solaris. Due to MQ Connectivity we had to install fixpack 6.1.0.23. Unfortunately this broke an ejb (1.1) which is still there as legacy (Test missed it). [3/23/10 11:33:18:703 CET] 00000055 EJBContainerI E WSVR0068E: Attempt to start EnterpriseBean EventRisk_1.0.0#EventRiskEJB.jar#PolicyDataManager failed with exception: java.lang.NoSuchMethodError: com.ibm.ejs.csi.ResRefListImpl.(Lorg/eclipse/jst/j2ee/ejb/EnterpriseBean;Lcom/ibm/ejs/models/base/bindings/ejbbnd/EnterpriseBeanBinding;Lcom/ibm/ejs/models/base/extensions/ejbext/EnterpriseBeanExtension;)V at com.ibm.ws.metadata.ejb.EJBMDOrchestrator.finishBMDInit(EJBMDOrchestrator.java:1364) at com.ibm.ws.runtime.component.EJBContainerImpl.finishDeferredBeanMetaData(EJBContainerImpl.java:4829) at com.ibm.ws.runtime.component.EJBContainerImpl$3.run(EJBContainerImpl.java:4631) at java.security.AccessController.doPrivileged(Native Method) at com.ibm.ws.security.util.AccessController.doPrivileged(AccessController.java:125) at com.ibm.ws.runtime.component.EJBContainerImpl.initializeDeferredEJB(EJBContainerImpl.java:4627) at com.ibm.ejs.container.HomeOfHomes.getHome(HomeOfHomes.java:390) at com.ibm.ejs.container.HomeOfHomes.internalCreateWrapper(HomeOfHomes.java:938) at com.ibm.ejs.container.EJSContainer.createWrapper(EJSContainer.java:4783) at com.ibm.ejs.container.WrapperManager.faultOnKey(WrapperManager.java:545) at com.ibm.ejs.util.cache.Cache.findAndFault(Cache.java:498) at com.ibm.ejs.container.WrapperManager.keyToObject(WrapperManager.java:489) We cannot reproduce the issue on our desktop boxes (it all works fine there) and we do not have direct access to our the Solaris machines (dependent on the deployment department) we do suspect a discrepancy on the jvm but we're not sure. My question is two fold: can you confirm IBM's statement that fixpack 6.1.0.23 for solaris indeed runs on jvm 1.5.0_17b04 our installation tells us ./java -version java version "1.5.0_13" But deploy department is not eager to investigate. Do you see some other solution, apart from hiring big blue's con$ultancy? kind regards, Jeroen.

  Read the article

• Streaming content to JSF UI

  - by Mark Lewis

  Hello, I was quite happy with my JSF app which read the contents of MQ messages received and supplied them to the UI like this: <rich:panel> <snip> <rich:panelMenuItem label="mylabel" action="#{MyBacking.updateCurrent}"> <f:param name="current" value="mylog.log" /> </rich:panelMenuItem> </snip> </rich:panel> <rich:panel> <a4j:outputPanel ajaxRendered="true"> <rich:insert content="#{MyBacking.log}" highlight="groovy" /> </a4j:outputPanel> </rich:panel> and in MyBacking.java private String logFile = null; ... public String updateCurrent() { FacesContext context=FacesContext.getCurrentInstance(); setCurrent((String)context.getExternalContext().getRequestParameterMap().get("current")); setLog(getCurrent()); return null; } public void setLog(String log) { sendMsg(log); msgBody = receiveMsg(moreargs); logFile = msgBody; } public String getLog() { return logFile; } until the contents of one of the messages was too big and tomcat fell over. Obviously, I thought, I need to change the way it works so that I return some form of stream so that no one object grows so big that the container dies and the content returned by successive messages is streamed to the UI as it comes in. Am I right in thinking that I can replace the work I'm doing now on a String object with a BufferedOutputStream object ie no change to the JSF code and something like this changing at the back end: private BufferedOutputStream logFile = null; public void setLog(String log) { sendMsg(args); logFile = (BufferedOutputStream) receiveMsg(moreargs); } public String getLog() { return logFile; }

  Read the article

• What's the best way of accessing a DRb object (e.g. Ruby Queue) from Scala (and Java)?

  - by Tom Morris

  I have built a variety of little scripts using Ruby's very simple Queue class, and share the Queue between Ruby and JRuby processes using DRb. It would be nice to be able to access these from Scala (and maybe Java) using JRuby. I've put together something Scala and the JSR-223 interface to access jruby-complete.jar. import javax.script._ class DRbQueue(host: String, port: Int) { private var engine = DRbQueue.factory.getEngineByName("jruby") private var invoker = engine.asInstanceOf[Invocable] engine.eval("require \"drb\" ") private var queue = engine.eval("DRbObject.new(nil, \"druby://" + host + ":" + port.toString + "\")") def isEmpty(): Boolean = invoker.invokeMethod(this.queue, "empty?").asInstanceOf[Boolean] def size(): Long = invoker.invokeMethod(this.queue, "length").asInstanceOf[Long] def threadsWaiting: Long = invoker.invokeMethod(this.queue, "num_waiting").asInstanceOf[Long] def offer(obj: Any) = invoker.invokeMethod(this.queue, "push", obj.asInstanceOf[java.lang.Object]) def poll(): Any = invoker.invokeMethod(this.queue, "pop") def clear(): Unit = { invoker.invokeMethod(this.queue, "clear") } } object DRbQueue { var factory = new ScriptEngineManager() } (It conforms roughly to java.util.Queue interface, but I haven't declared the interface because it doesn't implement the element and peek methods because the Ruby class doesn't offer them.) The problem with this is the type conversion. JRuby is fine with Scala's Strings - because they are Java strings. But if I give it a Scala Int or Long, or one of the other Scala types (List, Set, RichString, Array, Symbol) or some other custom type. This seems unnecessarily hacky: surely there has got to be a better way of doing RMI/DRb interop without having to use JSR-223 API. I could either make it so that the offer method serializes the object to, say, a JSON string and takes a structural type of only objects that have a toJson method. I could then write a Ruby wrapper class (or just monkeypatch Queue) to would parse the JSON. Is there any point in carrying on with trying to access DRb from Java/Scala? Might it just be easier to install a real message queue? (If so, any suggestions for a lightweight JVM-based MQ?)

  Read the article

• Enterprise Platform in Python, Design Advice

  - by Jason Miesionczek

  I am starting the design of a somewhat large enterprise platform in Python, and was wondering if you guys can give me some advice as to how to organize the various components and which packages would help achieve the goals of scalability, maintainability, and reliability. The system is basically a service that collects data from various outside sources, with each outside source having its own separate application. These applications would poll a central database and get any requests that have been submitted to perform on the external source. There will be a main website and REST/SOAP API that should also have access to the central data service. My initial thought was to use Django for the web site, web service and data access layer (using its built-in ORM), and then the outside source applications can use the web service(s) to get the information they need to process the request and save the results. Using this method would allow me to have multiple instances of the service applications running on the same or different machines to balance out the load. Are there more elegant means of accomplishing this? i've heard of messaging systems such as MQ, would something like that be beneficial in this scenario? My other thought was to use a completely separate data service not based on Django, and use some kind of remoting or remote objects (in they exist in Python) to interact with the data model. The downside here would be with the website which would become much slower if it had to push all of its data requests through a second layer. I would love to hear what other developers have come up with to achieve these goals in the most flexible way possible.

  Read the article

• Can't connect to Wired Network after installing 12.04

  - by ezz9

  I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

  Read the article

• Mercurial client error 255 and HTTP error 404 when attempting to push large files to server

  - by coderunner

  Problem: When attempting to push a changeset that contains 6 large files (.exe, .dmg, etc) to my remote server my client (MacHG) is reporting the error: "Error During Push. Mercurial reported error number 255: abort: HTTP Error 404: Not Found" What does the error even mean?! The only thing unique (that I can tell) about this commit is the size, type, and filenames of the files. How can I determine which exact file within the changeset is failing? How can I delete the corrupt changeset from the repository? Someone reported using "mq" extensions, but it looks overly complicated for what I'm trying to achieve. Background: I can push and pull the following: source files, directories, .class files and a .jar file to and from the server, using both MacHG and toirtoise HG. I successfully committed to my local repository the addition for the first time the 6 large .exe, .dmg etc installer files (about 130Mb total). In the following commit to my local repository, I removed ("untracked" / forget) the 6 files causing the problem, however the previous (failing) changeset is still queued to be pushed to the server (i.e. my local host is trying to push the "add" and then the "remove" to the remote server - and keep aligned with the "keep everything in history" philosophy of the source control system). I can commit .txt .java files etc using TortoiseHG from Windows PCs. I haven't actually testing committing or pushing the same large files using TortoiseHG. Please help! Setup: Client applications = MacHG v0.9.7 (SCM 1.5.4), and TortoiseHG v1.0.4 (SCM 1.5.4) Server = HTTPS, IIS7.5, Mercurial 1.5.4, Python 2.6.5, setup using these instructions: http://www.jeremyskinner.co.uk/mercurial-on-iis7/ In IIS7.5 the CGI handler is configured to handle ALL verbs (not just GET, POST and HEAD). My hgweb.cgi file on the server is as follows: #!/usr/bin/env python # # An example hgweb CGI script, edit as necessary # Path to repo or hgweb config to serve (see 'hg help hgweb') #config = "/path/to/repo/or/config" # Uncomment and adjust if Mercurial is not installed system-wide: #import sys; sys.path.insert(0, "/path/to/python/lib") # Uncomment to send python tracebacks to the browser if an error occurs: #import cgitb; cgitb.enable() from mercurial import demandimport; demandimport.enable() from mercurial.hgweb import hgweb, wsgicgi application = hgweb('C:\inetpub\wwwroot\hg\hgweb.config') wsgicgi.launch(application) My hgweb.config file on the server is as follows: [collections] C:\Mercurial Repositories = C:\Mercurial Repositories [web] baseurl = /hg allow_push = usernamea allow_push = usernameb

  Read the article

• With EJB 2.1, is declaring references to resources in ejb-jar.xml required?

  - by zwerd328

  I'm using Weblogic 9.2 with a lot of MDBs. These MDBs access JDBC DataSources and write to both locally and externally managed JMS Destinations using local and foreign XAConnectionFactorys, respectively. Each MDB demarcates a container-managed JTA transaction that should be distributed amongst all of these resources. Below is an excerpt from my ejb-jar.xml for an MDB that consumes from a local Queue called "MyDestination" and produces to an IBM Websphere MQ Queue called "MyOtherDestination". These logical names are linked to physical objects in my weblogic-ejb-jar.xml file. Is it required to use the <resource-ref> and <message-destination-ref> tags to expose the ConnectionFactory and Queue to the MDB? If so, is it required by Weblogic or is it required by the J2EE spec? And for what purpose? For example, is it required to support XA transactionality? I'm already aware of the benefit of decoupling the administered objects from my MDB using names exposed to the naming context of the MDB. Is this the only value added when specifying these tags? In other words, is it acceptable to just reference these objects from my MDB using the InitialContext and the objects' fully-qualified names? <enterprise-bean> <message-driven> <ejb-name>MyMDB</ejb-name> <ejb-class>com.mycompany.MyMessageDrivenBean</ejb-class> <transaction-type>Container</transaction-type> <message-destination-type>javax.jms.Queue</message-destination> <message-destination-link>MyDestination</message-destination-link> <resource-ref> <res-ref-name>jms/myQCF</res-ref-name> <res-type>javax.jms.XAConnectionFactory</res-type> <res-auth>Container</res-auth> </resource-ref> <message-destination-ref> <message-destination-ref-name>jms/myOtherDestination</message-destination-ref-name> <message-destination-type>javax.jms.Queue</message-destination-type> <message-destination-usage>Produces</message-destination-usage> <message-destination-link>MyOtherDestination</message-destination-link> </message-destination-ref> </message-driven> <enterprise-bean>

  Read the article

• I get an `Cannot read property 'slice' of undefined` message when I use the scrollTo jQuery plugin inside this function

  - by alexchenco

  I'm using the jQuery scrollTo plugin. I get this error in my JS Console: 16827Uncaught TypeError: Cannot read property 'slice' of undefined d.fn.scrollToindex.html.js:16827 jQuery.extend.eachindex.html.js:662 d.fn.scrollToindex.html.js:16827 jQuery.extend.eachindex.html.js:662 jQuery.fn.jQuery.eachindex.html.js:276 d.fn.scrollToindex.html.js:16827 popupPlaceindex.html.js:18034 (anonymous function)index.html.js:17745 jQuery.extend._Deferred.deferred.resolveWithindex.html.js:1018 doneindex.html.js:7247 jQuery.ajaxTransport.send.script.onload.script.onreadystatechange When I place $(".menu").scrollTo( $("li.matched").attr("id"), 800 ); inside it. function popupPlace(dict) { $popup = $('div#dish-popup'); $popup.render(dict,window.dishPopupTemplate); if(typeof(dict.dish) === 'undefined') { $popup.addClass('place-only'); } else { $popup.removeClass('place-only'); } var $place = $('div#dish-popup div.place'); var place_id = dict.place._id; if(liked[place_id]) { $place.addClass('liked'); } else { $place.removeClass('liked'); } if(dict.place.likes) { $place.addClass('has-likes'); } else { $place.addClass('zero-likes'); } var tokens = window.currentSearchTermTokens; var tokenRegex = tokens && new RegExp($.map(tokens, RegExp.escape).join('|'), 'gi'); $.each(dict.place.products, function(n, product) { $product = $('#menu-item-'+product.id); if(liked[place_id+'/'+product.id]) { $product.addClass('liked'); } if(tokens && matchesDish(product, tokens)) { $product.addClass('matched'); $product.highlight(tokenRegex); } else { $product.removeClass('matched'); $product.removeHighlight(); } if(product.likes) { $product.addClass('has-likes'); } else { $product.addClass('zero-likes'); } }); $('#overlay').show(); $('#dish-popup-container').show(); // Scroll to matched dish //$("a#scrolll").attr("href", "#" + $("li.matched").attr("id")); //$("a#scrolll").attr("href", "#" + $("li.matched").attr("id")); //$("a#scrolll").trigger("click"); $(".menu").scrollTo( $("li.matched").attr("id"), 800 ); // Hide dish results on mobile devices to prevent having a blank space at the bottom of the site if (Modernizr.mq('only screen and (max-width: 640px)')) { $('ol.results').hide(); } $(".close-dish-popup").click(function() { $("#overlay").hide(); $("#dish-popup-container").hide(); $('ol.results').show(); changeState({}, ['dish', 'place', 'serp']); }); showPopupMap(dict.place, "dish-popup-map"); } Any suggestion to fix this?

  Read the article

• Can't get network bridging to work

  - by Antonis Christofides

  I'm trying to make network bridging to work on a Debian squeeze (I'm experimenting in order to make a QEMU/KVM virtual machine that will be visible to the outside network as if it were a distinct machine). The problem is that when I type brctl addif br0 eth0 then I lose connectivity to the network until I type brctl delif br0 eth0. More specifically, here's how my machine looks like before I do anything (essentially eth0 is listening on 147.102.160.153): root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591848sec preferred_lft 604648sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 4c:ed:de:8e:44:d7 brd ff:ff:ff:ff:ff:ff 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether ee:7c:88:59:d0:e8 brd ff:ff:ff:ff:ff:ff Now let me add the bridge: root@laura:/home/anthony# brctl addbr br0 root@laura:/home/anthony# ip tuntap add dev tap0 mode tap root@laura:/home/anthony# ip link set tap0 up root@laura:/home/anthony# brctl addif br0 tap0 Until here everything continues to work normally. Finally, I try to add eth0 to the bridge: root@laura:/home/anthony# brctl addif br0 eth0 At this point, I no longer have a network connection. If I try to ping something, it tells "Destination Host Unreachable". The output of ip addr show seems normal: root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591908sec preferred_lft 604708sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever [snip wlan0, vboxnet0 and pan0, which are down and irrelevant] 8: br0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff 9: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff inet6 fe80::1430:f2ff:fe67:ab75/64 scope link valid_lft forever preferred_lft forever Also: root@laura:/home/anthony# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 147.102.160.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 147.102.160.200 0.0.0.0 UG 0 0 0 eth0 I can't understand what I'm doing wrong. I want the machine to continue to listen on 147.102.160.153 on eth0, and in addition to that I want to have a tap0 interface, bridged to eth0, that will be available to the guest machine so that the latter listens on another ip address (say 147.102.160.205). (If there's another way to achieve what I want, I'm also interested.)

  Read the article

• CodePlex Daily Summary for Thursday, November 15, 2012

  CodePlex Daily Summary for Thursday, November 15, 2012Popular ReleasesMVC Bootstrap: MVC Boostrap 0.5.6: A small demo site, based on the default ASP.NET MVC 3 project template, showing off some of the features of MVC Bootstrap. Added features to the Membership provider, a "lock out" feature to help fight brute force hacking of accounts. After a set number of log in attempts, the account is locked for a set time. If you download and use this project, please give some feedback, good or bad!Home Access Plus+: v8.4: This release only contains fixes for the 97576 release, you can download the v8.3 release files which aren't in this release from 97576 Changes: Fixed: Setup.aspx wrong jquery reference Fixed: Issue with loading the user's photo Changed: The JSON Urls to use a number of a date rather than a string Added: Code to hopefully, finally, fix the AD Browser not working some times File Changes: ~/bin/hap.ad.dll ~/bin/hap.web.dll ~/bin/hap.web.configuration.dll ~/bin/hap.web.livetiles.dl...OnTopReplica: Release 3.4: Update to the 3 version with major fixes and improvements. Compatible with Windows 8. Now runs (and requires) .NET Framework v.4.0. Added relative mode for region selection (allows the user to select regions as margins from the borders of the thumbnail, useful for windows which have a variable size but fixed size controls, like video players). Improved window seeking when restoring cloned thumbnail or cloning a window by title or by class. Improved settings persistence. Improved co...DotSpatial: DotSpatial 1.4: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...JSLint for Resharper: 0.2.4701 (Resharper 7.1): Added settings dialog. May now prioritize before Resharper JS messages JSLint settings may be set as default. (For example browser: true, indent: 2) Added support for JSLint directives in mixed language files. Upgraded to Resharper 7.1.WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.5: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes Docum...Social Network Importer for NodeXL: SocialNetImporter(v.1.6.1): This new version includes: - Fixes for some reported bugs. To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuAcDown?????: AcDown????? v4.3: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...SoftRenderer: SoftRenderer v0.2: SPONZA DEMO SoftRender is a CPU based renderer. It render 3D scene only on CPU. It's a project for learning purpose. SoftRender ????????，??????????。 http://i3.codeplex.com/Download?ProjectName=sr&DownloadId=528732 ?????????????，???compilehwshader.bat???????shader SoftRenderer.exe?vc10???????bin?? SoftRenderer_avx.exe?intel????????avx???cpu?????bin??WallSwitch: WallSwitch 1.2.1: Version 1.2.1 Changes: Improved collage image distribution to overlap older images first. Set default collage background blur distance to 4 (provides a more gradual effect). Fixed issue where wallpaper not displayed on Windows Vista when Cross-Fade transitions enabled. Fixed issue with duplicated themes not updating history view correctly.????: ???? 1.0: ????Unicode IVS Add-in for Microsoft Office: Unicode IVS Add-in for Microsoft Office: Unicode IVS Add-in for Microsoft Office ??? ?????、Unicode IVS?????????????????Unicode IVS???????????????。??、??????????????、?????????????????????????????。Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.74: fix for issue #18836 - sometimes throws null-reference errors in ActivationObject.AnalyzeScope method. add back the Context object's 8-parameter constructor, since someone has code that's using it. throw a low-pri warning if an expression statement is == or ===; warn that the developer may have meant an assignment (=). if window.XXXX or window"XXXX" is encountered, add XXXX (as long as it's a valid JavaScript identifier) to the known globals so subsequent references to XXXX won't throw ...???????: Monitor 2012-11-11: This is the first releasehttpclient?????????: httpclient??????? 1.0: httpclient??????? （1）?????????? （2）????????? （3）??2012-11-06??，???????。VidCoder: 1.4.5 Beta: Removed the old Advanced user interface and moved x264 preset/profile/tune there instead. The functionality is still available through editing the options string. Added ability to specify the H.264 level. Added ability to choose VidCoder's interface language. If you are interested in translating, we can get VidCoder in your language! Updated WPF text rendering to use the better Display mode. Updated HandBrake core to SVN 5045. Removed logic that forced the .m4v extension in certain ...ImageGlass: Version 1.5: http://i1214.photobucket.com/albums/cc483/phapsuxeko/ImageGlass/1.png v1.5.4401.3015 Thumbnail bar: Increase loading speed Thumbnail image with ratio Support personal customization: mouse up, mouse down, mouse hover, selected item... Scroll to show all items Image viewer Zoom by scroll, or selected rectangle Speed up loading Zoom to cursor point New background design and customization and others... v1.5.4430.483 Thumbnail bar: Auto move scroll bar to selected image Show / Hi...Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 002: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes: A fix for the Netflix example from Chapter 6 that was missing a service reference A fix for the ImageHelper issue (images were not being saved) - this was due to the buffer being inadequate and required streaming the writeable bitmap to a buffer first before encoding and savingmyCollections: Version 2.3.2.0: New in this version : Added TheGamesDB.net API for Games and NDS Added Support for Windows Media Center Added Support for myMovies Added Support for XBMC Added Support for Dune HD Added Support for Mede8er Added Support for WD HDTV Added Fast search options Added order by Artist/Album for music You can now create covers and background for games You can now update your ID3 tag with the info of myCollections Fixed several provider Performance improvement New Splash ...Draw: Draw 1.0: Drawing PadNew ProjectsCreatorRSS: CreatorRSS - A Simple Desktop tray RSS Reader This is a simple desktop RSS reader that will help in managing your feeds and get notifications. CreatorRSS is based on .NET framework 2.0 and is coded in C#. This was tested only on Windows Xp Professional Sp2 but it should work on any Windows operating systems that support .NET framework. Extensions Library: Extension Library adds several helpful extensions to your project including: - SharePoint Logging - Event Viewer Logging - Exception Handling - .Net ExtensionsHoliday Calendar: This project contains a holiday calendar user control to be used in Windows Form applications.InputSQL: C# InputSQLInstall Visual Basic 6 in Windows 8: Please see the home page.KaartenSolution: A very simple card game.MezanmiNet_TaxiReviews: just a review application on the mobile platformMSHelpMeHD: A Windows 8 Store App.ProjectSocial: This is just a project to try coding.Rabbit MQ Client for Windows Store apps: rabbitmq client support for windows apps storeRFC 822 DateTime: Parse or write a date and time formatted according to the RFC 822 specification. RxJS TypeScript difinition: TypeScript d.ts files for RxJS(ReactiveExtensions for JavaScript)Samurai Blades - Webapp: A mimic of a classic board game (Shogun) created for web using HTML5 and ASP.NET MVC 4 (including the new typescript js compiler). servicehook: testSIMS Bulk Import: SIMS .net is the most popular MIS system used by schools across the UK. This tool allows you to bulk import email addresses and information into UDF fields.SpaceFlight: This project is a browser for the SloanDigital Sky Survey Data sets that allows for unconstrained movement within the data set.Sparse matrix format converter: Convert matrix market files to CSR0, CSR1 format. SPAutoSuggestion: A JavaScript application to show auto-suggestions in SharePoint search site's text boxes like in Google.SpreadsheetLight by Vincent Tan: For the latest release of SpreadsheetLight always go to http://www.spreadsheetlight.com, Anele MbangaSSTU: SSTU - this is simple client for Russian "Saratov State Technical University" web-site.Username generator library: Helps generate usernamesVideoStream: First attempt at a Windows Store Style App, aims to make it easy to browse videos from links provided in social media streams.WP8 Async WebClient: Provides async/await (TPL) capability to WebClient within Windows Phone 8wsccprototype: this is a prototype of what the main website will look like. Every other customization will be made in time.wsubi: A spiced-up way to manage scripts. This is a Windows port of the the 'sub' project from 37signals (https://github.com/37signals/sub).??C#????????: ?????????????ROYcms?????????！ 1.?????????，?????? 2.????????，?????????? 3.?????，?????，????????????????,??????????? 4.???????????，????

  Read the article

• Coherence - How to develop a custom push replication publisher

  - by cosmin.tudor(at)oracle.com

  CoherencePushReplicationDB.zipIn the example bellow I'm describing a way of developing a custom push replication publisher that publishes data to a database via JDBC. This example can be easily changed to publish data to other receivers (JMS,...) by performing changes to step 2 and small changes to step 3, steps that are presented bellow. I've used Eclipse as the development tool. To develop a custom push replication publishers we will need to go through 6 steps: Step 1: Create a custom publisher scheme class Step 2: Create a custom publisher class that should define what the publisher is doing. Step 3: Create a class data is performing the actions (publish to JMS, DB, etc ) for the custom publisher. Step 4: Register the new publisher against a ContentHandler. Step 5: Add the new custom publisher in the cache configuration file. Step 6: Add the custom publisher scheme class to the POF configuration file. All these steps are detailed bellow. The coherence project is attached and conclusions are presented at the end. Step 1: In the Coherence Eclipse project create a class called CustomPublisherScheme that should implement com.oracle.coherence.patterns.pushreplication.publishers.AbstractPublisherScheme. In this class define the elements of the custom-publisher-scheme element. For instance for a CustomPublisherScheme that looks like that: <sync:publisher> <sync:publisher-name>Active2-JDBC-Publisher</sync:publisher-name> <sync:publisher-scheme> <sync:custom-publisher-scheme> <sync:jdbc-string>jdbc:oracle:thin:@machine-name:1521:XE</sync:jdbc-string> <sync:username>hr</sync:username> <sync:password>hr</sync:password> </sync:custom-publisher-scheme> </sync:publisher-scheme> </sync:publisher> the code is: package com.oracle.coherence; import java.io.DataInput; import java.io.DataOutput; import java.io.IOException; import com.oracle.coherence.patterns.pushreplication.Publisher; import com.oracle.coherence.configuration.Configurable; import com.oracle.coherence.configuration.Mandatory; import com.oracle.coherence.configuration.Property; import com.oracle.coherence.configuration.parameters.ParameterScope; import com.oracle.coherence.environment.Environment; import com.tangosol.io.pof.PofReader; import com.tangosol.io.pof.PofWriter; import com.tangosol.util.ExternalizableHelper; @Configurable public class CustomPublisherScheme extends com.oracle.coherence.patterns.pushreplication.publishers.AbstractPublisherScheme { /** * */ private static final long serialVersionUID = 1L; private String jdbcString; private String username; private String password; public String getJdbcString() { return this.jdbcString; } @Property("jdbc-string") @Mandatory public void setJdbcString(String jdbcString) { this.jdbcString = jdbcString; } public String getUsername() { return username; } @Property("username") @Mandatory public void setUsername(String username) { this.username = username; } public String getPassword() { return password; } @Property("password") @Mandatory public void setPassword(String password) { this.password = password; } public Publisher realize(Environment environment, ClassLoader classLoader, ParameterScope parameterScope) { return new CustomPublisher(getJdbcString(), getUsername(), getPassword()); } public void readExternal(DataInput in) throws IOException { super.readExternal(in); this.jdbcString = ExternalizableHelper.readSafeUTF(in); this.username = ExternalizableHelper.readSafeUTF(in); this.password = ExternalizableHelper.readSafeUTF(in); } public void writeExternal(DataOutput out) throws IOException { super.writeExternal(out); ExternalizableHelper.writeSafeUTF(out, this.jdbcString); ExternalizableHelper.writeSafeUTF(out, this.username); ExternalizableHelper.writeSafeUTF(out, this.password); } public void readExternal(PofReader reader) throws IOException { super.readExternal(reader); this.jdbcString = reader.readString(100); this.username = reader.readString(101); this.password = reader.readString(102); } public void writeExternal(PofWriter writer) throws IOException { super.writeExternal(writer); writer.writeString(100, this.jdbcString); writer.writeString(101, this.username); writer.writeString(102, this.password); } } Step 2: Define what the CustomPublisher should basically do by creating a new java class called CustomPublisher that implements com.oracle.coherence.patterns.pushreplication.Publisher package com.oracle.coherence; import com.oracle.coherence.patterns.pushreplication.EntryOperation; import com.oracle.coherence.patterns.pushreplication.Publisher; import com.oracle.coherence.patterns.pushreplication.exceptions.PublisherNotReadyException; import java.io.BufferedWriter; import java.util.Iterator; public class CustomPublisher implements Publisher { private String jdbcString; private String username; private String password; private transient BufferedWriter bufferedWriter; public CustomPublisher() { } public CustomPublisher(String jdbcString, String username, String password) { this.jdbcString = jdbcString; this.username = username; this.password = password; this.bufferedWriter = null; } public String getJdbcString() { return this.jdbcString; } public String getUsername() { return username; } public String getPassword() { return password; } public void publishBatch(String cacheName, String publisherName, Iterator<EntryOperation> entryOperations) { DatabasePersistence databasePersistence = new DatabasePersistence( jdbcString, username, password); while (entryOperations.hasNext()) { EntryOperation entryOperation = (EntryOperation) entryOperations .next(); databasePersistence.databasePersist(entryOperation); } } public void start(String cacheName, String publisherName) throws PublisherNotReadyException { System.err .printf("Started: Custom JDBC Publisher for Cache %s with Publisher %s\n", new Object[] { cacheName, publisherName }); } public void stop(String cacheName, String publisherName) { System.err .printf("Stopped: Custom JDBC Publisher for Cache %s with Publisher %s\n", new Object[] { cacheName, publisherName }); } } In the publishBatch method from above we inform the publisher that he is supposed to persist data to a database: DatabasePersistence databasePersistence = new DatabasePersistence( jdbcString, username, password); while (entryOperations.hasNext()) { EntryOperation entryOperation = (EntryOperation) entryOperations .next(); databasePersistence.databasePersist(entryOperation); } Step 3: The class that deals with the persistence is a very basic one that uses JDBC to perform inserts/updates against a database. package com.oracle.coherence; import com.oracle.coherence.patterns.pushreplication.EntryOperation; import java.sql.*; import java.text.SimpleDateFormat; import com.oracle.coherence.Order; public class DatabasePersistence { public static String INSERT_OPERATION = "INSERT"; public static String UPDATE_OPERATION = "UPDATE"; public Connection dbConnection; public DatabasePersistence(String jdbcString, String username, String password) { this.dbConnection = createConnection(jdbcString, username, password); } public Connection createConnection(String jdbcString, String username, String password) { Connection connection = null; System.err.println("Connecting to: " + jdbcString + " Username: " + username + " Password: " + password); try { // Load the JDBC driver String driverName = "oracle.jdbc.driver.OracleDriver"; Class.forName(driverName); // Create a connection to the database connection = DriverManager.getConnection(jdbcString, username, password); System.err.println("Connected to:" + jdbcString + " Username: " + username + " Password: " + password); } catch (ClassNotFoundException e) { e.printStackTrace(); } // driver catch (SQLException e) { e.printStackTrace(); } return connection; } public void databasePersist(EntryOperation entryOperation) { if (entryOperation.getOperation().toString() .equalsIgnoreCase(INSERT_OPERATION)) { insert(((Order) entryOperation.getPublishableEntry().getValue())); } else if (entryOperation.getOperation().toString() .equalsIgnoreCase(UPDATE_OPERATION)) { update(((Order) entryOperation.getPublishableEntry().getValue())); } } public void update(Order order) { String update = "UPDATE Orders set QUANTITY= '" + order.getQuantity() + "', AMOUNT='" + order.getAmount() + "', ORD_DATE= '" + (new SimpleDateFormat("dd-MMM-yyyy")).format(order .getOrdDate()) + "' WHERE SYMBOL='" + order.getSymbol() + "'"; System.err.println("UPDATE = " + update); try { Statement stmt = getDbConnection().createStatement(); stmt.execute(update); stmt.close(); } catch (SQLException ex) { System.err.println("SQLException: " + ex.getMessage()); } } public void insert(Order order) { String insert = "insert into Orders values('" + order.getSymbol() + "'," + order.getQuantity() + "," + order.getAmount() + ",'" + (new SimpleDateFormat("dd-MMM-yyyy")).format(order .getOrdDate()) + "')"; System.err.println("INSERT = " + insert); try { Statement stmt = getDbConnection().createStatement(); stmt.execute(insert); stmt.close(); } catch (SQLException ex) { System.err.println("SQLException: " + ex.getMessage()); } } public Connection getDbConnection() { return dbConnection; } public void setDbConnection(Connection dbConnection) { this.dbConnection = dbConnection; } } Step 4: Now we need to register our publisher against a ContentHandler. In order to achieve that we need to create in our eclipse project a new class called CustomPushReplicationNamespaceContentHandler that should extend the com.oracle.coherence.patterns.pushreplication.configuration.PushReplicationNamespaceContentHandler. In the constructor of the new class we define a new handler for our custom publisher. package com.oracle.coherence; import com.oracle.coherence.configuration.Configurator; import com.oracle.coherence.environment.extensible.ConfigurationContext; import com.oracle.coherence.environment.extensible.ConfigurationException; import com.oracle.coherence.environment.extensible.ElementContentHandler; import com.oracle.coherence.patterns.pushreplication.PublisherScheme; import com.oracle.coherence.environment.extensible.QualifiedName; import com.oracle.coherence.patterns.pushreplication.configuration.PushReplicationNamespaceContentHandler; import com.tangosol.run.xml.XmlElement; public class CustomPushReplicationNamespaceContentHandler extends PushReplicationNamespaceContentHandler { public CustomPushReplicationNamespaceContentHandler() { super(); registerContentHandler("custom-publisher-scheme", new ElementContentHandler() { public Object onElement(ConfigurationContext context, QualifiedName qualifiedName, XmlElement xmlElement) throws ConfigurationException { PublisherScheme publisherScheme = new CustomPublisherScheme(); Configurator.configure(publisherScheme, context, qualifiedName, xmlElement); return publisherScheme; } }); } } Step 5: Now we should define our CustomPublisher in the cache configuration file according to the following documentation. <cache-config xmlns:sync="class:com.oracle.coherence.CustomPushReplicationNamespaceContentHandler" xmlns:cr="class:com.oracle.coherence.environment.extensible.namespaces.InstanceNamespaceContentHandler"> <caching-schemes> <sync:provider pof-enabled="false"> <sync:coherence-provider /> </sync:provider> <caching-scheme-mapping> <cache-mapping> <cache-name>publishing-cache</cache-name> <scheme-name>distributed-scheme-with-publishing-cachestore</scheme-name> <autostart>true</autostart> <sync:publisher> <sync:publisher-name>Active2 Publisher</sync:publisher-name> <sync:publisher-scheme> <sync:remote-cluster-publisher-scheme> <sync:remote-invocation-service-name>remote-site1</sync:remote-invocation-service-name> <sync:remote-publisher-scheme> <sync:local-cache-publisher-scheme> <sync:target-cache-name>publishing-cache</sync:target-cache-name> </sync:local-cache-publisher-scheme> </sync:remote-publisher-scheme> <sync:autostart>true</sync:autostart> </sync:remote-cluster-publisher-scheme> </sync:publisher-scheme> </sync:publisher> <sync:publisher> <sync:publisher-name>Active2-Output-Publisher</sync:publisher-name> <sync:publisher-scheme> <sync:stderr-publisher-scheme> <sync:autostart>true</sync:autostart> <sync:publish-original-value>true</sync:publish-original-value> </sync:stderr-publisher-scheme> </sync:publisher-scheme> </sync:publisher> <sync:publisher> <sync:publisher-name>Active2-JDBC-Publisher</sync:publisher-name> <sync:publisher-scheme> <sync:custom-publisher-scheme> <sync:jdbc-string>jdbc:oracle:thin:@machine_name:1521:XE</sync:jdbc-string> <sync:username>hr</sync:username> <sync:password>hr</sync:password> </sync:custom-publisher-scheme> </sync:publisher-scheme> </sync:publisher> </cache-mapping> </caching-scheme-mapping> <!-- The following scheme is required for each remote-site when using a RemoteInvocationPublisher --> <remote-invocation-scheme> <service-name>remote-site1</service-name> <initiator-config> <tcp-initiator> <remote-addresses> <socket-address> <address>localhost</address> <port>20001</port> </socket-address> </remote-addresses> <connect-timeout>2s</connect-timeout> </tcp-initiator> <outgoing-message-handler> <request-timeout>5s</request-timeout> </outgoing-message-handler> </initiator-config> </remote-invocation-scheme> <!-- END: com.oracle.coherence.patterns.pushreplication --> <proxy-scheme> <service-name>ExtendTcpProxyService</service-name> <acceptor-config> <tcp-acceptor> <local-address> <address>localhost</address> <port>20002</port> </local-address> </tcp-acceptor> </acceptor-config> <autostart>true</autostart> </proxy-scheme> </caching-schemes> </cache-config> As you can see in the red-marked text from above I've:       - set new Namespace Content Handler       - define the new custom publisher that should work together with other publishers like: stderr and remote publishers in our case. Step 6: Add the com.oracle.coherence.CustomPublisherScheme to your custom-pof-config file: <pof-config> <user-type-list> <!-- Built in types --> <include>coherence-pof-config.xml</include> <include>coherence-common-pof-config.xml</include> <include>coherence-messagingpattern-pof-config.xml</include> <include>coherence-pushreplicationpattern-pof-config.xml</include> <!-- Application types --> <user-type> <type-id>1901</type-id> <class-name>com.oracle.coherence.Order</class-name> <serializer> <class-name>com.oracle.coherence.OrderSerializer</class-name> </serializer> </user-type> <user-type> <type-id>1902</type-id> <class-name>com.oracle.coherence.CustomPublisherScheme</class-name> </user-type> </user-type-list> </pof-config> CONCLUSIONSThis approach allows for publishers to publish data to almost any other receiver (database, JMS, MQ, ...). The only thing that needs to be changed is the DatabasePersistence.java class that should be adapted to the chosen receiver. Only minor changes are needed for the rest of the code (to publishBatch method from CustomPublisher class).

  Read the article

• CodePlex Daily Summary for Wednesday, November 24, 2010

  CodePlex Daily Summary for Wednesday, November 24, 2010Popular ReleasesEdinamarry Free Tarot Software for Windows: Edinamarry Free Tarot Software Version 3.12: Version 3.12 - 24th November, 2010::: Contains new features and components. Fixed bugs too. History: Version 3.10 - 19th November 2010::: Contains bug fixes and replacements for older features. Added Collapsible Panels support. Client profiles and all cards data import and export, storage is now done in standalone databases. A new 2010-2011 Windows 7/XP freeware Tarot and Divinity Software for PC and Windows 7. Edinamarry brings to you an open Tarot Scribe Kit by which you can create your ...Deep Zoom for WPF: First Release: This first release of the Deep Zoom control has the same source code, binaries and demos as the CodeProject article (http://www.codeproject.com/KB/WPF/DeepZoom.aspx).Minemapper: Minemapper v0.1.2: Added cave and nether support. Added ability to enter a height (press enter or 'set height' button). Added View menu, moved 'Show Navigation Controls' there. Added View->Background Color menu to change the canvas background color (preference not currently saved). Improved handling of height change (still not perfect, think it can be made faster). Images are now cached in %APPDATA%\Minemapper, organized by world, then direction, then mode (cave, day, night, nether), then skylight, th...BlogEngine.NET: BlogEngine.NET 2.0 RC: This is a Release Candidate version for BlogEngine.NET 2.0. The most current, stable version of BlogEngine.NET is version 1.6. Find out more about the BlogEngine.NET 2.0 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation and the installation screencast. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. As this ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.156: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a feature for aggregating the overall metrics in a folder full of NodeXL workbooks, adds geographical coordinates to the Twitter import features, and fixes a memory-related bug. See the Complete NodeXL Release History for details. Please Note: There is a new option in the setup program to install for "Just Me" or "Everyone." Most people...Wii Backup Fusion: Wii Backup Fusion 0.8.2 Beta: New in this release: - Update titles after language change - Tool tips for name/title - Transfer DVD to a specific image file - Download titles from wiitdb.com - Save Settings geometry - Titles and Cover language global in settings - Convert Files (images) to another format - Format WBFS partition - Create WBFS file - WIT path configurable in settings - Save last path in Files/Load - Sort game lists - Save column width - Sequenz of columns changeable - Set indicated columns in settings - Bus...SQL Monitor: SQL Monitor 1.3: 1. change sys.sysprocesses to DMV: http://msdn.microsoft.com/en-us/library/ms187997.aspx select * from sys.dm_exec_connections select * from sys.dm_exec_requests select * from sys.dm_exec_sessions 2. adjust columns to fit without scrollingVFPX: FoxBarcode v.0.11: FoxBarcode v.0.11 - Released 2010.11.22 FoxBarcode is a 100% Visual FoxPro class that provides a tool for generating images with different bar code symbologies to be used in VFP forms and reports, or exported to other applications. Its use and distribution is free for all Visual FoxPro Community. Whats is new? Added a third parameter to the BarcodeImage() method Fixed some minor bugs History FoxBarcode v.0.10 - Released 2010.11.19 - 85 Downloads Project page: FoxBarcodeASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3.1 and demos: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6DotSpatial: DotSpatial 11-21-2010: This release introduces the following Fixed bugs related to dispose, which caused issues when reordering layers in the legend Fixed bugs related to assigning categories where NULL values are in the fields New fast-acting resize using a bitmap "prediction" of what the final resize content will look like. ImageData.ReadBlock, ImageData.WriteBlock These allow direct file access for reading or writing a rectangular window. Bitmaps are used for holding the values. Removed the need to stor...MDownloader: MDownloader-0.15.24.6966: Fixed Updater; Fixed minor bugs;WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.1: Version: 2.0.0.1 (Milestone 1): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...Home Access Plus+: v5.4.4: Version 5.4.4Change Log: Added logic to the My Computer Browsers to allow for users with no home directories (set in ad anyhow) Renamed the My School Computer Enhanced page to My School Computer Extended Edition File Changes: ~/bin/hap.web.dll ~/clientbin/hap.silverlight.xap ~/mycomputersl.aspx.NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.01: Added new extensions for - object.CountLoopsToNull Added new extensions for DateTime: - DateTime.IsWeekend - DateTime.AddWeeks Added new extensions for string: - string.Repeat - string.IsNumeric - string.ExtractDigits - string.ConcatWith - string.ToGuid - string.ToGuidSave Added new extensions for Exception: - Exception.GetOriginalException Added new extensions for Stream: - Stream.Write (overload) And other new methods ... Release as of dotnetpro 01/2011Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-11-19: Code samples for Visual Studio 2010Prism Training Kit: Prism Training Kit 4.0: Release NotesThis is an updated version of the Prism training Kit that targets Prism 4.0 and added labs for some of the new features of Prism 4.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication MEF Navigation Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2...Free language translator and file converter: Free Language Translator 2.2: Starting with version 2.0, the translator encountered a major redesign that uses MEF based plugins and .net 4.0. I've also fixed some bugs and added support for translating subtitles that can show up in video media players. Version 2.1 shows the context menu 'Translate' in Windows Explorer on right click. Version 2.2 has links to start the media file with its associated subtitle. Download the zip file and expand it in a temporary location on your local disk. At a minimum , you should uninstal...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.4 Released: Hi, Today we are releasing Visifire 3.6.4 with few bug fixes: * Multi-line Labels were getting clipped while exploding last DataPoint in Funnel and Pyramid chart. * ClosestPlotDistance property in Axis was not behaving as expected. * In DateTime Axis, Chart threw exception on mouse click over PlotArea if there were no DataPoints present in Chart. * ToolTip was not disappearing while changing the DataSource property of the DataSeries at real-time. * Chart threw exception ...Christoc's DotNetNuke Module Development Template: 00.00.05: This release of the DotNetNuke Module Development Templates replaces the NANT scripts with MSBuild scripts. You will need to download and install the MSBuildTasks MSI file from http://msbuildtasks.tigris.org/, it's pretty straight forward without needing any sort of customization during installation. To install these templates copy the ZIP file downloaded into your My Documents\Visual Studio 2008 (or 2010)\Templates\Project Templates\C#(or VB)\Web folder (if the WEB folder doesn't exist, cre...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...New ProjectsAdventureWorks Products: This is a very simple module built for DNN 5.01.00 and up which allows you to edit some basic AdventureWorks product data. The module displays skin techniques.Amnesia: Transacts all changes to a website to facilitate automated UI testing. Queries from the automated test can also query the application database without blocking and participate in the transaction.DBA Inventory: DBA Inventory is a SQL Server based project to help inventory, manage, control, and report on a large SQL Server infrastructure without requiring agents on the target. dcorp: ?????? cmsFoldingAnalysis: Software para monitoramento de cliente folding@homeHelpSystem2010: testei2iPortal: i2i Technologies projectLucandra.NET: Lucandra.NET is a Lucene + Cassandra implementation written in C# which is based on the Lucandra (Java) project by Jake Luciani. Apache's Lucene is a high-performance full-text search engine, and Apache's Cassandra is a promising NoSQL database, originally developed by Facebook.MSBuild ConfigTransform for Visual Studio: MSbuild ConfigTransform makes transforming of config files (xml) an integrated part of your Visual Studio 2010 build action (CTRL+SHIFT+B or SHIFT+F6 or what your keyboards shortcut are set to) Provides optional fail on build on failed transformation of xml with error messagesNyx Editor: Nyx is a free, open-source game development tool aimed at making the creation and edition of levels or maps easy and enjoyable. Nyx exports level data as JSON, XML, or binary making it malleable to your own projects, engines, and needs.openfleet: This is a modular open source project to control fleets. It's a fork of the gofleet project (http://gitorious.org/gofleet).PoShRabbit: A PowerShell module to enable messaging against a Rabbit MQ server. Provides deeply integrated facilities for handling message queues and subscriptions using scripts. Enables PowerShell scripts to publish messages in Rabbit exchanges.Silverlight and WP7 Exception Handling and Logging building block: This code will help you handle and log client side exceptions in your Silverlight 4 and WP7 projects. Errors that occur in clients can be sent to your loggingservice. The service will store them. It's developed in C#, using VS2010.student admission system: this is emerson college registration system.Useful Desktop Components: Este artigo discute o uso de alguns componentes que podem ser muito úteis no dia a dia de um programador desktop como por exemplo manipulação de textos RTF, criptografias, validações, armazenamento de arquivos, validações de CPF e CNPJ, entre outros.WPF Calendar and DatePicker Themes: WPF Calendar and DatePicker ThemesWPF PropertyGrid Control: WPF PropertyGrid ControlWrix Development Kit: One development kit for internet and enterprise both.XNAPF: This project aims to create a control for integrating easily an XNA rendering in a WPF picture. xSNMP Extensions for System Center OpsMgr 2007: Developed by OpsMgr users with substantial community input, and tested extensively in implementations around the world, the xSNMP Management Pack suite is a powerful open-source SNMP monitoring implementation for Microsoft System Center Operations Manager 2007 R2 environments.

  Read the article

• Ant get task throws "get doesn't support nested resources element" error

  - by David Corley

  The following ant xml should work according to documentation, but does not. Can anyone tell me if I'm doing something wrong. The get task should support the nested "resources" element in Ant 1.7.1 which is the version I'm using: -- <target name="setup"> <tstamp/> <!-- set up work areas --> <!--<taskdef name="ccmutil" classname="com.allfinanz.framework.tools.CCMUtil" classpath="\\Abate\Data\Build_Lib\Ivy\com.allfinanz\ccmutil\1.0\ccmutil-1.0.jar"/>--> <!-- 1st one is special, also sets ${project_wa} --> <!--<ccmutil file="${ant.file}" projects="framework, xpbuw, xpb, bil"/>--> <property name="framework_wa" value="../../../framework"/> <property name="xpbuw_wa" value="../../../xpbuw"/> <property name="xpb_wa" value="../../../xpb"/> <property name="bil_wa" value="../.."/> <!-- Create properties to hold the build values --> <property name="out" value="${user.dir}"/> <!-- This may be overridden from the command line --> <property name="locale" value="us"/> <!-- set contextRoot up as a property - this mean that it can be overwritten from the command line e.g.: ant -DcontextRoot=xpertBridge. --> <property name="contextRoot" value="xpertBridge"/> <property name="build_dir" value="${out}/${release}/build"/> <property name="distrib_dir" value="${out}/${release}/distrib"/> <property name="build.number" value="-1"/> <!-- Download dependencies from repo.fms.allfinanz.com--> <get dest="${lib}"> <resources> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=central&amp;g=soap&amp;a=soap&amp;v=2.3.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=JBOSS&amp;g=apache-fileupload&amp;a=commons-fileupload&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=regexp&amp;a=regexp&amp;v=1.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=javax.mail&amp;a=mail&amp;v=1.2&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.ibm.ws.webservices&amp;a=webservices.thinclient&amp;v=6.1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=avalon-framework&amp;a=avalon-framework&amp;v=4.2.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=jimi&amp;a=jimi&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=batik&amp;a=batik-all&amp;v=1.6&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=bsf&amp;a=bsf&amp;v=2.3.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=rhino&amp;a=js&amp;v=1.5R3&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=central&amp;g=commons-io&amp;a=commons-io&amp;v=1.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=central&amp;g=commons-logging&amp;a=commons-logging&amp;v=1.0.4&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=xmlgraphics&amp;a=commons&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=barcode4j&amp;a=barcode4j&amp;v=trunkBIL&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.ibm&amp;a=fmcojagt&amp;v=6.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.allfinanz&amp;a=ejbserversupport&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.sun&amp;a=jce&amp;v=1.0&amp;e=zip"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=ssce&amp;a=ssce&amp;v=5.8&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.ibm&amp;a=mq&amp;v=5.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.ibm&amp;a=mqjms&amp;v=5.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=NetServerRemote&amp;a=NetServerRemote&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=NetServerRMI&amp;a=NetServerRMI&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=jwsdp&amp;a=saaj-api&amp;v=1.5&amp;e=jar&amp;c=api"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=jwsdp&amp;a=saaj-impl&amp;v=1.5&amp;e=jar&amp;c=impl"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=org.apache.xmlgraphics&amp;a=fop&amp;v=0.92b&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=xerces&amp;a=dom3-xml-apis&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=org.apache&amp;a=derbynet&amp;v=10.0.2&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.sun&amp;a=jsse&amp;v=1.0&amp;e=jar"/> </resources> </get> </target>

  Read the article

• Form contents not showing in email

  - by fmz

  This is a followup to a question I posted yesterday. I thought everything was working fine, but today, I am not getting any results in the email from the drop down field. Here is the form code in question: <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" name="purpose" style="width: 300px; height:35px;"> <option value="" selected="selected">-- Select One --</option> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> It is then processed in PHP and should output the selected option to an email, however the Reason for Contact line always comes through with nothing in it. Here is the PHP code: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> Any assistance would be greatly appreciated. Thanks!

  Read the article

• Getting Selected Dropdown content to show in a form-generated email

  - by fmz

  I have a small contact form: <form method="post" action="contact.php" name="contactform" id="contactform"> <fieldset> <legend>Please fill in the following form to contact us</legend> <label for="name"><span class="required">*</span> Your Name</label> <input name="name" type="text" id="name" size="30" value="" /> <br /> <label for="company"><span class="required">*</span> Company</label> <input name="company" type="text" id="name" size="30" value="" /> <br /> <label for="email"><span class="required">*</span> Email</label> <input name="email" type="text" id="email" size="30" value="" /> <br /> <label for="phone"><span class="required">*</span> Phone</label> <input name="phone" type="text" id="phone" size="30" value="" /> <br /> <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" style="width: 300px; height:35px;"> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> <br /> <label for=comments><span class="required">*</span> Comments</label> <textarea name="comments" cols="40" rows="3" id="comments" style="width: 350px;"></textarea> <p><span class="required">*</span> Please help us control spam.</p> <label for=verify accesskey=V>&nbsp;&nbsp;&nbsp;3 + 1 =</label> <input name="verify" type="text" id="verify" size="4" value="" style="width: 30px;" /><br /><br /> <input type="submit" class="submit" id="submit" value="Submit" /> </fieldset> </form> I want to send the results of the form in a php generated email. Everything is coming through except the selected contents of the "purpose" drop down. Here is the PHP: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($company) == '') { echo '<div class="error_message">Attention! Please enter your company name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> What am I missing? Thanks.

  Read the article

< Previous Page | 2 3 4 5 6