pizza - Page 6 - Developer IT

How do I fix a super slow MacBook?

- by MakingScienceFictionFact

I'm running a black MacBook 4.1. Intel Core 2 Duo @ 2.4 GHz, 2 GB RAM, 250 GB hard disk drive, bus speed is 800 MHz. It's about three years old in excellent shape externally. I treat this thing like a baby. It used to run awesome, but now it's super slow at everything. I get the spinning pizza of death constantly. It takes a long time to boot up or load any program, even Safari and iTunes. iPhoto is terribly slow. The Internet doesn't work properly and it reminds me of a buggy PC. I've formatted it and re-installed Mac OS X 10.6 (with all updates), and I've done the disk repairs process. As an iOS developer this is driving me crazy, but luckily I have an iMac to work on in the day which is fast. I'm ready to format it again, but that didn't work last time. After the last format, I copied back files from an external drive so maybe the offending files were hidden in there somewhere. Here are the hard disk drive and RAM specifications. It is upgrade-able to 4 GB of RAM. Hard disk drive: The Fujitsu Mobile MHY2250BH is a 250 GB, standard hard disk drive. Its burst transfer rate is 150 Mbyte/s. This is a 5400 RPM drive and comes with an 8 MB buffer. RAM: two sticks of 1 GB DDR2 SDRAM, speed: 667 MHz.

Read the article

Optimize Apache performance

- by Phliplip

I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

Read the article

SQLAuthority News – Guest Post – Performance Counters Gathering using Powershell

- by pinaldave

Laerte Junior Laerte Junior has previously helped me personally to resolve the issue with Powershell installation on my computer. He did awesome job to help. He has send this another wonderful article regarding performance counter for readers of this blog. I really liked it and I expect all of you who are Powershell geeks, you will like the same as well. As a good DBA, you know that our social life is restricted to a few movies over the year and, when possible, a pizza in a restaurant next to your company’s place, of course. So what we have to do is to create methods through which we can facilitate our daily processes to go home early, and eventually have a nice time with our family (and not sleeping on the couch). As a consultant or fixed employee, one of our daily tasks is to monitor performance counters using Perfmom. To be honest, IDE is getting more complicated. To deal with this, I thought a solution using Powershell. Yes, with some lines of Powershell, you can configure which counters to use. And with one more line, you can already start collecting data. Let’s see one scenario: You are a consultant who has several clients and has just closed another project in troubleshooting an SQL Server environment. You are to use Perfmom to collect data from the server and you already have its XML configuration files made with the counters that you will be using- a file for memory bottleneck f, one for CPU, etc. With one Powershell command line for each XML file, you start collecting. The output of such a TXT file collection is set to up in an SQL Server. With two lines of command for each XML, you make the whole process of data collection. Creating an XML configuration File to Memory Counters: Get-PerfCounterCategory -CategoryName "Memory" | Get-PerfCounterInstance | Get-PerfCounterCounters |Save-ConfigPerfCounter -PathConfigFile "c:\temp\ConfigfileMemory.xml" -newfile Creating an XML Configuration File to Buffer Manager, counters Page lookups/sec, Page reads/sec, Page writes/sec, Page life expectancy: Get-PerfCounterCategory -CategoryName "SQLServer:Buffer Manager" | Get-PerfCounterInstance | Get-PerfCounterCounters -CounterName "Page*" | Save-ConfigPerfCounter -PathConfigFile "c:\temp\BufferManager.xml" –NewFile Then you start the collection: Set-CollectPerfCounter -DateTimeStart "05/24/2010 08:00:00" -DateTimeEnd "05/24/2010 22:00:00" -Interval 10 -PathConfigFile c:\temp\ConfigfileMemory.xml -PathOutputFile c:\temp\ConfigfileMemory.txt To let the Buffer Manager collect, you need one more counters, including the Buffer cache hit ratio. Just add a new counter to BufferManager.xml, omitting the new file parameter Get-PerfCounterCategory -CategoryName "SQLServer:Buffer Manager" | Get-PerfCounterInstance | Get-PerfCounterCounters -CounterName "Buffer cache hit ratio" | Save-ConfigPerfCounter -PathConfigFile "c:\temp\BufferManager.xml" And start the collection: Set-CollectPerfCounter -DateTimeStart "05/24/2010 08:00:00" -DateTimeEnd "05/24/2010 22:00:00" -Interval 10 -PathConfigFile c:\temp\BufferManager.xml -PathOutputFile c:\temp\BufferManager.txt You do not know which counters are in the Category Buffer Manager? Simple! Get-PerfCounterCategory -CategoryName "SQLServer:Buffer Manager" | Get-PerfCounterInstance | Get-PerfCounterCounters Let’s see one output file as shown below. It is ready to bulk insert into the SQL Server. As you can see, Powershell makes this process incredibly easy and fast. Do you want to see more examples? Visit my blog at Shell Your Experience You can find more about Laerte Junior over here: www.laertejuniordba.spaces.live.com www.simple-talk.com/author/laerte-junior www.twitter.com/laertejuniordba SQL Server Powershell Extension Team: http://sqlpsx.codeplex.com/ Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Add-On, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology Tagged: Powershell

Read the article

Windows Phone 7 Prototype 001: Speech Recognition on WP7

At some point in the future it will be awesome when you can just tell your computer what to do and it does it - without typing to help those of us with a blistering 11 WPM hunk and peck technique. Siri, a mobile digital assistant using speech recognition was voted best tech at SXSW. I dont know about that one. Although, I'm sure it will get better when Apple rebuilds it and bundles on iPhone 5. So how would you do that on WP7? There have been some videos floating around showing Bing with some voice control so obviously the phone has speech recognition. So what options are there: System.Speech? Not included in WP7/SL Nuance software like Siri? No WP7/SL version yet. Invoking the SAPI dlls on the phone? No automation factory in WP7 SL. Web services using System.Speech and mic on the phone? YES! The last one was my least favorite but that works for now. I built a quick sample app to show how to do text-to-speech and speech recognition on WP7. @eklimczak will not be happy with the developer designed UI. In this sample there is web service with provides access to the system.speech APIs in .NET. Basically its just passing around byte arrays. On the phone its using the XNA audio frameworks to play the text-to-speech stream and to record using the microphone. The code is pretty simple and you can download from the link at the end of this post. The only things to note are adjusting the WCF config to handle larger byte uploads and the Microphone API is a little weird with that 1 second buffer. It would be nice if you could just to mic.start and mic.end which would return an array of bytes instead of managing your own stream inside the buffer ready callback. Couple of downsides to this approach: Recoding from the phone has some static. Could be my code or the my mic is bad / not calibrated right. Having to make web service calls instead of local access is not ideal (Microsoft, please add an API for the SAPI dlls) Although in the context of an app like Siri its not so bad since you need to do web service lookups to get data back Speech recognition quality really depends on either a) a limited grammar set like that pizza grammar in the sample or b) training the recognizer. For the latter it would be annoying to have users train the system. Using the System.Speech stuff youd have to have a profile for each user. So until Microsoft adds some speech client APIs on the phone or Nuance releases a wp7 product, this is a decent workaround. In the future Id like to build something similar to Siri. I shall call it Iris in homage. Im a big fan of mobile speech apps because frankly its just not safe to Google while driving. Since some of my designer co-workers have been posting UI sketches for WP7, Id like to start posting some code prototypes for things I try out on the phone. That will probably last 2 weeks, but for the moment I have like 10 posts in the queue. Sample Code 100% guaranteed to work on my emulatorDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

“I could use a little help here” or “I can do it myself, thank you” for Cloud Projects

- by BuckWoody

Windows Azure allows you to write code in languages within the .NET stack, you can use Java, C++, PHP, NodeJS and others. Code is code - other than keeping things stateless, using a Web or Worker Role in Azure is not all that different from working with an on-premises system. However…. Working in a scalable, component-based stateless architecture that can use federated security is not all that common for many developers. Some are used to owning the server, scaling up, and state-full paradigms that have a single security domain. Making the transition whilst trying to create a new software application or even port a previous one can be daunting. Sure, we have absolutely tons of free training, kits, videos, online books and more to learn on your own, but some things like architecture can be pivotal as you move along. So the question is, should you just strike out on your own for a Cloud project, or get Microsoft Consulting Services or another partner to work with you on your first one? I use a few decision points to help guide the projects I assist in. Note: I’m a huge fan of having help that ends up giving you training and leaves you in charge. If you do engage with someone to help you, make sure you keep this clear and take more and more ownership yourself as the project progresses. How much time do you have? Usually the first thing I ask is about the timeline for the project. It doesn’t matter how skilled you are, if you have a short window to get things done it’s better to get help - especially if this is your first cloud project. Having someone that knows the platform well can save you amazing amounts of time. If you have longer, then start with the training in the link above and once you feel confident, jump in. How complex is the project? If there are a lot of moving parts, it’s best to engage a partner. The reason is that certain interactions - particularly things like Service Bus or Data Integration - can be quite different than what you may have encountered before. How many people do you have? I have a “pizza rule” about projects I’ve used in my career - if it takes over two pizzas to feed everyone on the project, it’s too big and will fail. That being said, one developer and a one-week deadline does not a good project make, usually. It’s best to have at least one architect (or someone in that role) guiding the project along, and at least two developers to work on a cloud project. That’s a generalization of course, since I’ve seen great software on Azure with one developer writing code all by herself, but for more complex projects, more (to a point) is better. The nice thing about bringing on a partner is that you don’t have to hire them full time - they help you and then they go away. How critical is the project? There’s no shame in using some help. If the platform is new, if the project is large and complex, and if it is critical to the business, you should engage a partner. That’s regardless of Cloud or anything else - get some help. You don’t want to hit your company’s bottom line in a negative way, but you have to innovate and get them a competitive advantage. Do your research, make sure the partner is qualified to help you, and get it done. Don’t let these questions scare you off. There are lots of projects you can implement on Windows and SQL Azure with nothing other than the Software Development Kit (SDK) that you get for free with Windows Azure. And assistance comes in many forms - sometimes just phone support, a friend you can ask. Microsoft Consulting Services or any of our great partners. You can get help on just the architecture piece or have them show you how to write the code. They’ll get involved as little or as much as you like.

Read the article

Free SQL Server training? Now you’re talking.

- by Fatherjack

SQL Server user groups are everywhere, literally all over the globe there are SQL Server professionals meeting on a regular basis, sharing ideas, solving problems, learning about how to do new stuff and new ways to do old stuff and it’s all for free. I don’t have detailed figures but of all the SQL Server professionals there are only a small number of them attend these user groups. Those people are the people that are taking the time and making then effort to make themselves better at their chosen trade, more employable and having a good time. For free. I don’t know why but there are many people that don’t seem to want to be the best they can be. Some of you enlightened people that do already attend could be doing more though. Have you ever spoken at your group? Not just in the break while you have a mouthful of pizza and a drink in your hand but had the attention of the whole group listen to you speak. It doesn’t need to be a full hour, it doesn’t need to be some obscure deeply technical demonstration of SQL Server internals, just a few minutes on something that you do that might help other people with their daily work. A neat process that helps you get from Problem A to Solution B. There is no need to get concerned that becoming a speaker means that you suddenly have to know more than anyone else in the room. This is you talking about something that you experienced. What you did, what you would repeat, what you might do differently next time. No one in the audience can pick you up on a technicality. If someone comes out with a great idea that you hadn’t thought of, say “That’s a great idea, I didn’t think of that while we had the problem on our hands. I’ll try to remember that for next time”. If someone is looking to show you up for picking the wrong decision (and this, in my experience, is very uncommon indeed) then you simply give a reply like “Well, at the time we chose that option. Perhaps another time then we would tackle things differently but we were happy with how our solution worked”. It’s sharing things like this that makes user groups have a real value, talking about how you coped with or averted a disaster, a handy little section of code or using a tool in a particular way that you take for granted that might, just might, be something that other people haven’t thought of that solves a problem or saves some time for them. At the next meeting you might get the same benefit from a different person and so it goes on. As individuals benefits so the community benefits. For free. Things I encourage you to do; If you are a chapter or user group leader; encourage someone from your group who has never spoken before to start speaking. If you are a chapter or user group attendee that hasn’t spoken before; speak for at least 5 minutes on something related to SQL Server at any group meeting. If you don’t currently attend a user group; please go along to you nearest one when they are meeting next and invest in yourself and your future. UK user group details are here: http://sqlsouthwest.co.uk/national_ug.htm , PASS chapters outside the UK are found via http://www.sqlpass.org/PASSChapters/LocalChapters.aspx. If you are unsure of how you might achieve any of these things then get in touch with me*, I’ll give you specific advice on getting started on any of the above points and help you prove to yourself what you are capable of. SQL Community – be part of it and make it better. Let me know how you get on in the comments.

Read the article

St. Louis ALT.NET

- by Brian Schroer

I’m a huge fan of the St. Louis .NET User Group and a regular attendee of their meetings, but always wished there was a local group that discussed more advanced .NET topics. (That’s not a criticism of the group - I appreciate that they want to server developers with a broad range of skill levels). That’s why I was thrilled when Nicholas Cloud started a St. Louis ALT.NET group in 2010. Here’s the “about us” statement from the group’s web site: The ALT.NET community is a loosely coupled, highly cohesive group of like-minded individuals who believe that the best developers do not align themselves with platforms and languages, but with principles and ideas. In 2007, David Laribee created the term "ALT.NET" to explain this "alternative" view of the Microsoft development universe--a view that challenged the "Microsoft-only" approach to software development. He distilled his thoughts into four key developer characteristics which form the basis of the ALT.NET philosophy: You're the type of developer who uses what works while keeping an eye out for a better way. You reach outside the mainstream to adopt the best of any community: Open Source, Agile, Java, Ruby, etc. You're not content with the status quo. Things can always be better expressed, more elegant and simple, more mutable, higher quality, etc. You know tools are great, but they only take you so far. It's the principles and knowledge that really matter. The best tools are those that embed the knowledge and encourage the principles (e.g. Resharper.) The St. Louis ALT.NET meetup group is a place where .NET developers can learn, share, and critique approaches to software development on the .NET stack. We cater to the highest common denominator, not the lowest, and want to help all St. Louis .NET developers achieve a superior level of software craftsmanship. I don’t see a lot of ALT.NET talk in blogs these days. The movement was harmed early on by the negative attitudes of some of its early leaders, including jerk moves like the Entity Framework “vote of no confidence”, but I do see occasional mentions of local groups like the St. Louis one. I think ALT.NET has been successful at bringing some of its ideas into the .NET world, including heavily influencing ASP.NET MVC and raising the general level of software craftsmanship for developers working on the Microsoft stack. The ideas and ideals live on, they’re just not branded as “this is ALT.NET!” In the past 18 months, St. Louis ALT.NET meetups have discussed topics like: NHibernate F# and other functional languages AOP CoffeeScript “How Ruby Is Making Me a Stronger C# Developer” Using rake for builds CQRS .NET dynamic programming micro web frameworks – Nancy & Jessica Git ALT.NET doesn’t mean (to me, anyway) “alternatives to .NET”, but “alternatives for .NET”. We look at how things are done in Ruby and other languages/platforms, but always with the idea “What can I learn from this to take back to my “day job” with .NET?”. Meetings are held at 7PM on the fourth Wednesday of each month at the offices of Professional Employment Group. PEG is located at 999 Executive Parkway (Suite 100 – lower level) in Creve Coeur (South of Olive off of Mason Road - Here's a map). Food is not supplied (sorry if you’re a big fan of the Papa John’s Crust-Lovers’ Pizza that’s a staple of user group meetings), but attendees are encouraged to come early and bring/share beer, so that’s cool. Thanks to Nick for organizing, and to Professional Employment Group for lending their offices. Please visit the meetup site for more information.

Read the article

Extract Audio from a Video File with Pazera Free Audio Extractor

- by DigitalGeekery

Have you ever wanted to extract some or all of the audio from a video file? Today we’ll take a look at Pazera Free Audio Extractor. A simple audio converter that specializes in that very task. Download the Pazera Free Audio Extractor. (See download link below) You’ll need to unzip the download folder, but there is no need to install the application. Simply double-click the AudioExtractor.exe file to run the application. To add your video files to the queue to be converted, click on the Add files button at the top left. You can add multiple files to the queue and convert them all at one time. Browse for your video file, and click Open. Your video will be added to the Queue for processing. Under Output directory you can choose to output to a folder of your choice. Outputting to the same folder as the input folder is the default. Pazera Free Audio Extractor includes pre-configured profiles that will simplify the process of choosing conversion settings. To load a profile, choose one from the Profile drop down list and then click the Load button. You can choose to output to MP3, AAC, AC3, WMA, FLAC, OGG or WAV file format. You will see the profile update the Audio settings in the panels at the lower left of the application. If you wish, you may also select your own custom settings. Advanced Settings The Advanced settings can be used if you want to extract only a portion of the the audio, such as a clip of dialog or a song from a movie. To extract only a portion of the audio, set the start time by selecting the Start time offset check box, then entering the time in the video clip where the audio begins. To set the end time, begin by selecting the Duration check box. Now, you can either select the Duration radio button and enter the amount of time for which you would like to extract the audio, or you can select the End time offset radio button and enter the time in the video clip where the audio ends. When you are ready to convert, click the CONVERT button on the menu at the top of the screen. An output box will open and display the conversion progress. When finished, click Close. Now you are ready to enjoy your audio clip. Pazera Free Audio Extractor is a basic audio tool that is easy enough for everyone to use. It runs on Windows only and supports most common video formats including AVI, FLV, MP4, MPG, MOV, 3GP, and WMV. Download Free Audio Extractor 1.3 Similar Articles Productive Geek Tips Eufony Free Audio Player – Resource Gentle Audio PlayerConvert .3GP and .3G2 Files to AVI / MPEG for FreeTurn Off Auto-Play of Audio and Video CDs and DVDs in UbuntuHow to Make/Edit a movie with Windows Movie Maker in Windows VistaEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs

Read the article

A view from the call center for the Nashville Flood telethon

- by Rob Foster

I want to break away from my usual topic of something technical and talk about what I experienced tonight while working in the call center for the Nashville Flood telethon, which was broadcast on WSMV, CNN, and The Weather Channel. We started receiving calls about 7pm local time and to be honest, I had no idea what to expect when going into this. I mean, I'm a pretty good talker, but this is different...We had a good script of what to say and how we were supposed to say it, as well as paper forms and pens that we used to collect information from people who wanted to donate their money to help. I took my first few calls pretty easily and it went pretty quick and easy. Everyone was upbeat and happy to be in the call center as well as people happy to be donating money. Pizza, snacks, and soft drinks were flowing well. Everyone is smiling and happy. :) About 3 or 4 calls into my night, I got a call from a lady that had lost 2 family members in West Nashville who drowned in the floods. She was crying when she called and I of course tried to console her. She told me how bad her situation was, losing family members and much of her neighborhood. After all this, she still just wanted to help other people. She was donating all the money that she could to the telethon and I want to share a direct quote from her: "I want to donate this instead of buying flowers for my family members' funeral because people out there need help.". Please let me pause while I get myself together <again>. That caught me so off guard (and still does). I had kids calling wanting to donate their allowance, open their piggy banks, whatever they could do. These are kids. Kids not much older than my boys. Kids who should be focused on buying the next cool video game or toy or whatever but wanted to do something. Everyone just seemed to want to help. I took calls from as far away as British Columbia as well and pretty much coast to coast. how cool is that? Yet another thing that caught me off guard. This kind lady that called from British Columbia told me how much she loved visiting Nashville and just hated to see this happen. I belive that she said that she will be attending the CMA Fest this year too. I was sure to tell her not to cancel her plans! :) It felt like every call I took (and I took A LOT, as did everyone else) was very personal and heartfelt. I've never had the privelage to do anything like this and fell lucky to have been able to help out with answering phones and logging donations. Nashville will bounce back very quickly, people are out there day and night helping each other, and the spirits are very high here. I hope that one day, my kids read this blog and better understand who they are, where they come from, and what the human spirt is and can be. I love this city, I love the people here, I love the culture and even more than ever am proud to say that this is me. This is us. We are Nashville!

Read the article

View AccuWeather Forecasts in Google Chrome

- by Asian Angel

Being able to keep an eye on the weather while at work or browsing the Internet is definitely helpful. If you like detailed forecasts then join us as we take a look at the Forecastfox Weather extension for Google Chrome. Getting Started As soon as the Forecastfox Weather extension has finished installing you will automatically be presented with the “Customize Forecastfox Page”. The default setting is for New York with English measurement units. Enter your location into the blank and hit “Enter” to display the listing for your city/area. If you are presented multiple options to choose from simply click on the appropriate listing. Once you have your city/area displayed you will notice that it is possible to have access to weather forecasts for multiple locations. You can easily remove any unneeded listings with the “Remove Link”. For our example we removed the New York listing. Note: Click on desired locations and measurement units to automatically set them as defaults (no save button required). Forecastfox Weather in Action You can hover your mouse over the “Toolbar Button” to see the current weather conditions. Clicking on the “Toolbar Button” opens a popup window with the current conditions, 7 day forecast, and a static satellite image. If desired you can access additional details for the current weather conditions. Clicking on “details” opens a new tab with a nice bit of information such as UV Index, Moon Phases, Cloud Ceiling, etc. Note: AccuWeather.com webpages will have some ads displayed. Perhaps you need the Hourly Forecast… Once again a new tab will be opened with the predicted hourly weather conditions for the current day. Going back to the popup window you may also select a specific day from the 7 day forecast. You will be presented with a “Day & Night” forecast for the chosen day with links to view “Additional Details & Hourly” information. Interested in the satellite image instead? You can click on either of the available links for larger images. Once the new tab is open you can choose from a variety of different satellite images. Conclusion If you have been wanting a solid weather forecast extension for your Chrome browser then Forecastfox Weather is definitely a recommended install. Links Download the Forecastfox Weather extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Add Weather Forecasts to Google ChromeView Weather Underground Forecasts in Google ChromeView the Time & Date in Chrome When Hiding Your TaskbarView Maps and Get Directions in Google ChromeGoogle Image Search Quick Fix TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar

Read the article

TechEd 2010 Important Events

If youll be attending TechEd in New Orleans in a couple of weeks, make sure the following are all on your calendar: Party with Palermo TechEd 2010 Edition Sunday 6 June 2010 7:30-930pm Central Time RSVP and see who else is coming here. The party takes place from 730pm to 930pm Central (Local) Time, and includes a full meal, free swag, and prizes. The event is being held at Jimmy Buffetts Margaritaville located at 1104 Decatur Street. Developer Practices Session: DPR304 FAIL: Anti-Patterns and Worst Practices Monday 7 June 2010 4:30pm-545pm Central Time Room 276 Come to my session and hear about what NOT to do on your software project. Hear my own and others war stories and lessons learned. Youll laugh, youll cry, youll realize youre a much better developer than a lot of folks out there. Heres the official description: Everybody likes to talk about best practices, tips, and tricks, but often it is by analyzing failures that we learn from our own and others' mistakes. In this session, Steve describes various anti-patterns and worst practices in software development that he has encountered in his own experience or learned about from other experts in the field, along with advice on recognizing and avoiding them. View DPR304 in TechEd Session Catalog >> Exhibition Hall Reception Monday 7 June 2010 545pm-9pm Immediately following my session, come meet the shows exhibitors, win prizes, and enjoy plenty of food and drink. Always a good time. Party: Geekfest Tuesday 8 June 8pm-11pm Central Time, Pat OBriens Lets face it, going to a technical conference is good for your career but its not a whole lot of fun. You need an outlet. You need to have fun. Cheap beer and lousy pizza (with a New Orleans twist) We are bringing back GeekFest! Join us at Pat OBriens for a night of gumbo, beer and hurricanes. There are limited invitations available, so what are you waiting for? If you are attending the TechEd 2010 conference and you are a developer, you are invited. To register pick up your "duck" ticket (and wristband) in the TechEd Technical Learning Center (TLC) at the Developer Tools & Languages (DEV) information desk. You must have wristband to get in. Tuesday, June 8th from 8pm 11pm Pat OBriens New Orleans 624 Bourbon Street New Orleans, LA 70130 Closing Party at Mardi Gras World Thursday 10 June 730pm-10pm Central Time Join us for the Closing Party and enjoy great food, beverages, and the excitement of New Orleans at Mardi Gras World. The colors, the lights, the music, the joie de vivreits all here. Learn more >> Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

TechEd 2010 Important Events

If youll be attending TechEd in New Orleans in a couple of weeks, make sure the following are all on your calendar: Party with Palermo TechEd 2010 Edition Sunday 6 June 2010 7:30-930pm Central Time RSVP and see who else is coming here. The party takes place from 730pm to 930pm Central (Local) Time, and includes a full meal, free swag, and prizes. The event is being held at Jimmy Buffetts Margaritaville located at 1104 Decatur Street. Developer Practices Session: DPR304 FAIL: Anti-Patterns and Worst Practices Monday 7 June 2010 4:30pm-545pm Central Time Room 276 Come to my session and hear about what NOT to do on your software project. Hear my own and others war stories and lessons learned. Youll laugh, youll cry, youll realize youre a much better developer than a lot of folks out there. Heres the official description: Everybody likes to talk about best practices, tips, and tricks, but often it is by analyzing failures that we learn from our own and others' mistakes. In this session, Steve describes various anti-patterns and worst practices in software development that he has encountered in his own experience or learned about from other experts in the field, along with advice on recognizing and avoiding them. View DPR304 in TechEd Session Catalog >> Exhibition Hall Reception Monday 7 June 2010 545pm-9pm Immediately following my session, come meet the shows exhibitors, win prizes, and enjoy plenty of food and drink. Always a good time. Party: Geekfest Tuesday 8 June 8pm-11pm Central Time, Pat OBriens Lets face it, going to a technical conference is good for your career but its not a whole lot of fun. You need an outlet. You need to have fun. Cheap beer and lousy pizza (with a New Orleans twist) We are bringing back GeekFest! Join us at Pat OBriens for a night of gumbo, beer and hurricanes. There are limited invitations available, so what are you waiting for? If you are attending the TechEd 2010 conference and you are a developer, you are invited. To register pick up your "duck" ticket (and wristband) in the TechEd Technical Learning Center (TLC) at the Developer Tools & Languages (DEV) information desk. You must have wristband to get in. Tuesday, June 8th from 8pm 11pm Pat OBriens New Orleans 624 Bourbon Street New Orleans, LA 70130 Closing Party at Mardi Gras World Thursday 10 June 730pm-10pm Central Time Join us for the Closing Party and enjoy great food, beverages, and the excitement of New Orleans at Mardi Gras World. The colors, the lights, the music, the joie de vivreits all here. Learn more >> Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Telephone Number to Geolocation UK

- by David Toy

Is there a service that provides latitude and longitude for UK phone numbers? For example: Query: 0141 574 xxx, Returns: (55.8659829, -4.2602205) [Glasgow City Centre] Allow me to stress that I am not looking for a reverse-directory-enquires. I am more interested in 'local area' for things like weather by phone or "Where's my nearest Pizza Shop?" If this service doesn't exist your suggestions on how to implement it or where to get data from would also be incredibly useful. I am aware that Ofcom provides a list of area codes with a place name [1] suitable for geolocation, but I have my concerns about resolution. I see this as a particular problem in smaller towns and rural areas where an area code will cover a large geographical area. Second Example: Area Code: 01555, Ofcom: Lanark However: 01555 860xxx is Crossford (4 miles W of Lanark) 01555 77xxxx is Carluke (5 miles NW) 01555 89xxxx is Lesmahagow (5 miles SW) 01555 840xxx is Carnwath (7 miles NE) Therefore 01555 covers about ~80 sq miles. That's not particularly local. [1] Ofcom Area Code Tool: http://www.ofcom.org.uk/consumer/2009/09/telephone-area-codes-tool/

Read the article

Google local search API - callback never called

- by Laurent Luce

Hello, I am trying to retrieve some local restaurants using the LocalSearch Google API. I am initializing the search objects in the OnLoad function and I am calling the searchControl execute function when the user clicks on a search button. The problem is that my function attached to setSearchCompleteCallback never get called. Please let me know what I am doing wrong here. <script src="http://www.google.com/jsapi"></script> <script type="text/javascript"> google.load('maps' , '2'); google.load('search' , '1'); var searcher, searchControl; function OnLoad() { searchControl = new google.search.SearchControl(); searcher = new google.search.LocalSearch(); // create the object // Add the searcher to the SearchControl searchControl.addSearcher(searcher); searchControl.setSearchCompleteCallback(searcher , function() { var results = searcher.results; // Grab the results array // We loop through to get the points for (var i = 0; i < results.length; i++) { var result = results[i]; } }); $('#user_search_address').live('click', function() { g_searchControl.execute('pizza san francisco'); }); } google.setOnLoadCallback(OnLoad); </script>

Read the article

re.sub emptying list

- by jmau5

def process_dialect_translation_rules(): # Read in lines from the text file specified in sys.argv[1], stripping away # excess whitespace and discarding comments (lines that start with '##'). f_lines = [line.strip() for line in open(sys.argv[1], 'r').readlines()] f_lines = filter(lambda line: not re.match(r'##', line), f_lines) # Remove any occurances of the pattern '\s*<=>\s*'. This leaves us with a # list of lists. Each 2nd level list has two elements: the value to be # translated from and the value to be translated to. Use the sub function # from the re module to get rid of those pesky asterisks. f_lines = [re.split(r'\s*<=>\s*', line) for line in f_lines] f_lines = [re.sub(r'"', '', elem) for elem in line for line in f_lines] This function should take the lines from a file and perform some operations on the lines, such as removing any lines that begin with ##. Another operation that I wish to perform is to remove the quotation marks around the words in the line. However, when the final line of this script runs, f_lines becomes an empty lines. What happened? Requested lines of original file: ## English-Geek Reversible Translation File #1 ## (Moderate Geek) ## Created by Todd WAreham, October 2009 "TV show" <=> "STAR TREK" "food" <=> "pizza" "drink" <=> "Red Bull" "computer" <=> "TRS 80" "girlfriend" <=> "significant other"

Read the article

Quality questionnaire php mysql graphipcs

- by Marcelo

Hi, i'm making a questionnaire about a service quality, its contains the options (poor, regular, good, very good). It's contains 6 questions (radio button) and a suggestion box (textbox). In the table of the database i created 6 rows for questions, 1 for suggestion and 1 for date (a friend of mine tole me to use this but i didn't get why). q1) I'm going to atribute a value form 1 to 4 to the radio buttons options, and i'd like to sum every answer for each question, and then divide by the numbers of user that answered that question and give the mean. how am i supposed to to that? I'd also like generate reports of the month, of the year. q2) not only about the questionnaire but for registration too. I need all the fields to be completed, no blank options, if he don't complete all of fields it'll not be submitted and there will be a warning message to the user. q3) about the field type, i'd like it to be the same class that is in the database, i'm having a "problem". Ex: Name(varchar) : 1234(int), in the field 'name' of the table of the database 1234 will be shown as name, and i don't want this, i want only the type that i declared in the construction of the table. q4) i'd also like to know if it's possible to create pizza graphics, about the percentage of each question, is this possible? q5) I'm using phpmyadmin and some of my id's are auto_increment, but 'cause of my tests they at a high number, i'd like to restart to 0 the ids number, is this possible? Thanks for the attention.

Read the article

Complete Guide to Networking Windows 7 with XP and Vista

- by Mysticgeek

Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP. Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well. Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

Read the article

Fix Windows Computer Problems with Microsoft Fix it Center

- by Matthew Guay

Fixing computer problems can often be difficult, but Microsoft is aiming to make it as simple as a couple clicks with. Here’s how you can easily fix computer problems with Microsoft’s new Fix it Center Beta. Last year Microsoft began offering small Fix it scripts that you could download and run to help solve common computer problems automatically. These were added to some of the most visited Windows help pages, and helped fix problems with things such as printing errors and Aero glass support. Now, the Fix it scripts have been bundled together with the Fix it Center, making fixing your computer even easier. This free tool works great on all editions of Windows XP, Vista, and Windows 7. Note: The Fix it Center is currently in beta, so only run if you are comfortable running beta software. Getting Started Download the Fix it Center installer (link below), and install as normal. The installer will download the remaining components, and then finish the installation. In Windows XP, if you have not yet installed .NET 2.0, you may see the following prompt. Click Yes to go to the download site, and once you’ve installed .NET 2.0, run the Fix it Center setup again. Also, the Fix it Center uses PowerShell to automate its fixes, but if it is not installed yet the installer will automatically download and install it. Find Fixes for Your PC Once Fix it Center is installed, you can personalize it for your computer. Select Now, and the click Next. It will scan your computer for problems with known solutions, and will offer to go ahead and install these troubleshooters. If you choose to not install them, you can always download them from within the Fix it Center at a later time. While those troubleshooters are downloading, you can create a Fix it account. This will give you additional help and support, and let you review Fix it solutions for all your computers from an online dashboard. You need a Windows Live ID to create an account. Also, choose whether or not to send information to Microsoft about your hardware and software problems. Get Problems Fixed Now that the Fix it Center is installed and has identified issues on your computer, it’s time to get the problems fixed. Here’s the default front screen in Windows 7, showing all of the available fixes. And here’s the Fix it Center running in Windows XP. Select one of the Troubleshooters to see more information about it, and click Run to start it. You can choose to either detect problems and have them fixed automatically, or you can choose for the Fix it Center to show you the solutions and let you choose whether to apply them or not. The defaults usually work good, and only take a couple minutes to apply the fixes, but you can select your own fixes if you’d rather be in control. It will scan your computer for known problems in this area, and then will show you the results. Here, Fix it determined that startup programs may be causing performance issues. Select Start System Configuration, and uncheck any of the programs you do not usually use. Once you’ve run a troubleshooter, you can see the issues it checked for and any problems it discovered. If you created the online account, you can also choose to view the details online. This will show all of your computers with Fix it Center and the fixes you’ve run on them. Conclusion Whether you’re a power user or new to computers, sometimes it’s best to just get your problems fixed and go on with life instead of digging through the registry, forums, and hacking your way to a solution. Remember the service is still in beta and may not work perfectly or solve your issues every time. But it’s something cool and worth a look. Links Download Microsoft Fix it Center Beta Fix additional problems with Microsoft’s Fix it Center Online Similar Articles Productive Geek Tips Disable Windows Mobility Center in Windows 7 or VistaMake Outlook Faster by Disabling Unnecessary Add-InsUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Disable Security Center Popup Notifications in Windows VistaHow To Manage Action Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

Read the article

Building a Distributed Commerce Infrastructure in the Cloud using Azure and Commerce Server

- by Lewis Benge

One of the biggest questions I routinely get asked is how scalable Commerce Server is. Of course the text book answer is the product has been around for 10 years, powers some of the largest e-Commerce websites in the world, so it scales horizontally extremely well. One argument however though is what if you can't predict the growth of demand required of your Commerce Platform, or need the ability to scale up during busy seasons such as Christmas for a retail environment but are hesitant on maintaining the infrastructure on a year-round basis? The obvious answer is to utilise the many elasticated cloud infrastructure providers that are establishing themselves in the ever-growing market, the problem however is Commerce Server is still product which has a legacy tightly coupled dependency on Windows and IIS components. Commerce Server 2009 codename "R2" however introduced to the concept of an n-tier deployment of Microsoft Commerce Server, meaning you are no longer tied to core objects API but instead have serializable Commerce Entity objects, and business logic allowing for Commerce Server to now be built into a WCF-based SOA architecture. Presentation layers no-longer now need to remain on the same physical machine as the application server, meaning you can now build the user experience into multiple-technologies and host them in multiple places – leveraging the transport benefits that a WCF service may bring, such as message queuing, security, and multiple end-points. All of this logic will still need to remain in your internal infrastructure, for two reasons. Firstly cloud based computing infrastructure does not support PCI security requirements, and secondly even though many of the legacy Commerce Server dependencies have been abstracted away within this version of the application, it is still not a fully supported to be deployed exclusively into the cloud. If you do wish to benefit from the scalability of the cloud however, you can still achieve a great Commerce Server and Azure setup by utilising both the Azure App Fabric in terms of the service bus, and authentication services and Windows Azure to host any online presence you may require. The architecture would be something similar to this: This setup would allow you to construct your Commerce Services as part of your on-site infrastructure. These services would contain all of the channels custom business logic, and provide the overall interface back into the underlying Commerce Server components. It would be recommended that services are constructed around the specific business domain of the application, which based on your business model would usually consist of separate services around Catalogue, Orders, Search, Profiles, and Marketing. The App Fabric service bus is then used to abstract and aggregate further the services, making them available to the cloud and subsequently secured by App Fabrics authentication services. These services are now available for consumption by any client, using any supported technology – not just .NET. Thus meaning you are now able to construct apps for IPhone, integrate with Java based POS Devices, and any many other potential uses. This aggregation is useful, and forms the basis of the further strategy around diversifying and enhancing the e-Commerce experience, but also provides the foundation for the scalability we want to gain from utilising a cloud-based application platform. The Windows Azure application platform is Microsoft solution to benefiting from the true economies of scale in terms of the elasticity of the cloud. Just before the launch of the Azure Platform – Domino's pizza actually managed to run their whole SuperBowl operation from the scalability of Windows Azure, and simply switching back to their traditional operation the next day with no residual infrastructure costs. The platform also natively can subscribe to services and messages exposed within the AppFabric service bus, making it an ideal solution to build and deploy a presentation layer which will need to support of scalable infrastructure – such as a high demand public facing e-Commerce portal, or a promotion element of a brand. Windows Azure has excellent support for ASP.NET, including its own caching providers meaning expensive operations such as catalogue queries can persist in memory on the application server, reducing the demand on internal infrastructure and prioritising it for more business critical operations such as receiving orders and processing payments. Windows Azure also supports other languages too, meaning utilising this approach you can technically build a Commerce Server presentation layer in Java, PHP, or Ruby – or equally in ASP.NET or Silverlight without having to change any of the underlying business or Commerce Server implementation. This SOA-style architecture is one of the primary differentiators for Commerce Server as a product in the e-Commerce market, and now with the introduction of a WCF capability in Commerce Server 2009/2009 R2 the opportunities for extensibility of the both the user experience, and integration into third parties, are drastically increased, all with no effect to the underlying channel logic. So if you are looking at deployment options for your e-Commerce application to help support demand in a cost effective way. I would highly recommend you consider looking at Windows Azure, and if you have any questions in-particular about this style of deployment, please feel free to get in touch!

Read the article

Recover that Photo, Picture or File You Deleted Accidentally

- by The Geek

Have you ever accidentally deleted a photo on your camera, computer, USB drive, or anywhere else? What you might not know is that you can usually restore those pictures—even from your camera’s memory stick. Windows tries to prevent you from making a big mistake by providing the Recycle Bin, where deleted files hang around for a while—but unfortunately it doesn’t work for external USB drives, USB flash drives, memory sticks, or mapped drives. The great news is that this technique also works if you accidentally deleted the photo… from the camera itself. That’s what happened to me, and prompted writing this article. Restore that File or Photo using Recuva The first piece of software that you’ll want to try is called Recuva, and it’s extremely easy to use—just make sure when you are installing it, that you don’t accidentally install that stupid Yahoo! toolbar that nobody wants. Now that you’ve installed the software, and avoided an awful toolbar installation, launch the Recuva wizard and let’s start through the process of recovering those pictures you shouldn’t have deleted. The first step on the wizard page will let you tell Recuva to only search for a specific type of file, which can save a lot of time while searching, and make it easier to find what you are looking for. Next you’ll need to specify where the file was, which will obviously be up to wherever you deleted it from. Since I deleted mine from my camera’s SD card, that’s where I’m looking for it. The next page will ask you whether you want to do a Deep Scan. My recommendation is to not select this for the first scan, because usually the quick scan can find it. You can always go back and run a deep scan a second time. And now, you’ll see all of the pictures deleted from your drive, memory stick, SD card, or wherever you searched. Looks like what happened in Vegas didn’t stay in Vegas after all… If there are a really large number of results, and you know exactly when the file was created or modified, you can switch to the advanced view, where you can sort by the last modified time. This can help speed up the process quite a bit, so you don’t have to look through quite as many files. At this point, you can right-click on any filename, and choose to Recover it, and then save the files elsewhere on your drive. Awesome! Restore that File or Photo using DiskDigger If you don’t have any luck with Recuva, you can always try out DiskDigger, another excellent piece of software. I’ve tested both of these applications very thoroughly, and found that neither of them will always find the same files, so it’s best to have both of them in your toolkit. Note that DiskDigger doesn’t require installation, making it a really great tool to throw on your PC repair Flash drive. Start off by choosing the drive you want to recover from… Now you can choose whether to do a deep scan, or a really deep scan. Just like with Recuva, you’ll probably want to select the first one first. I’ve also had much better luck with the regular scan, rather than the “dig deeper” one. If you do choose the “dig deeper” one, you’ll be able to select exactly which types of files you are looking for, though again, you should use the regular scan first. Once you’ve come up with the results, you can click on the items on the left-hand side, and see a preview on the right. You can select one or more files, and choose to restore them. It’s pretty simple! Download DiskDigger from dmitrybrant.com Download Recuva from piriform.com Good luck recovering your deleted files! And keep in mind, DiskDigger is a totally free donationware software from a single, helpful guy… so if his software helps you recover a photo you never thought you’d see again, you might want to think about throwing him a dollar or two. Similar Articles Productive Geek Tips Stupid Geek Tricks: Undo an Accidental Move or Delete With a Keyboard ShortcutRestore Accidentally Deleted Files with RecuvaCustomize Your Welcome Picture Choices in Windows VistaAutomatically Resize Picture Attachments in Outlook 2007Resize Your Photos with Easy Thumbnails TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

Read the article

Day 1 - Finding Like Minds

- by dapostolov

So, is being a Game Developer any different from being an IT Developer? I picture a poorly lit environment where I get to purchase my own desk lamp; I'm thinking one of those huge lava lamps that pump out so much heat you could fry an egg on it. To my right: a "great wall" of empty coke cans dwarf me. Eating my last slice of pizza I look across my desk to see a fellow developer with a smug look on his face; he's just coded his latest module for the game and it looks like he's in nirvana. My duty, of course, is to remind him to keep focused on the job at hand. So, picking up my trusty elastic and aerodynamically crafted paper bullet I begin a 10 minute war of welts and laughter which is promptly abrupted by our Project Manager demanding more details from our morning Scrum meeting. After providing about 5 minutes of geek speak and several words of comfort to make his eyes glaze over...it hits me, the idea for the module...beckoning my developer friend over, we quickly shoo the Project Manager away and begin our brainstorming frenzy ... now, where'd I put that full can of coke? OK. OK. This isn't probably the most ideal game developer environment, but it definitely sounds fun to me...and from what I gather is nothing like most game development companies. But I'm not doing this blog series to "go pro"; like I stated in my first post I want to make a 2D game from an idea my best friend and I drummed up long, long ago. I'm in this for the passion AND I want to see how easy it is for us .Net Developers to create a game. So where do I start? Where can I find like minded individuals? What technologies are there? What do I need to make a video game? The questions are endless....AND...since I already have an idea ... lets start with ... Technology (yes, I'm a geek, live with it...) Technology OK. Predominantly, games are still made in C++ or even C. I'm not sure how much assembly code is floating around lately, however, that is not my concern. I do know C / C++ from my past, enough to even get me by, but I'm mainly interested in a recent, not-so-new, technology called XNA. What is XNA? XNA allows us .Net Developers to make 2D / 3D games for windows, Xbox*, and Windows Mobile 7*. * = for a nominal fee *cough* The following link is your one stop shop to XNA game development: http://creators.xna.com/en-US/education/gettingstarted The above site hosts information such as: - getting started - a sample/instructional shooter game in 2D / 3D with code (if I'm taking too long for you in this blog series) - downloads - starter kits... http://creators.xna.com/en-US/education/starterkits/ And of course...forums. You can also subscribe and pay for their premium membership which gets you some pretty awesome tutorials, resources, downloads, and premium community support. Some general Wiki information about XNA: http://en.wikipedia.org/wiki/XNA_%28Microsoft%29 Community Support OK. Let's move on to industry and community support. Apart from XNA, there are some really cool sites out there, I just haven't found all of them yet. However, I found a really cool Game Development website called Gamastura. You can click on the following link to get you there: http://www.gamasutra.com/ The site is 100% dedicated to "The Art & Business of Making Games". Armed with blogs, twitter, jobs/resumes and most importantly industry news; one could subscribe to the feed and got lost in the wealth of information it provides. On a side note: I remember Gamasutra being around when my best friend and I wanted to make a video game...meaning, they've been around for a while now. I think the most beneficial aspect of this site is to understand the industry you want to get into. Otherwise, it's just a cool site to keep up to date with the industry in general. Another Community Support option is LinkedIn. Amongst the land of extremely bloated achievements and responsibilities lay 3 groups (that I have found) that deal with game development.: http://www.linkedin.com/groups?gid=59205 - Game Developers http://www.linkedin.com/groups?gid=824817 - DirectX Game Developer Network http://www.linkedin.com/groups?gid=756587 - DirectX Developers The Game Developers group in LinkedIn is by far the most active of the three and could possibly provide a wealth of support. What I've done thus far: - I lightly researched the XNA technology - I looked around for some community sites to assist me - I downloaded the XNA Game Studio 3.1 on my PC and installed it on my IDE - I even tried both tutorials! http://creators.xna.com/en-US/education/gettingstarted/bgintro/chapter1 Best Regards D.

Read the article

php array code with regular expressions

- by user551068

there are few mistakes which it is showing as Warning: preg_match() [function.preg-match]: Delimiter must not be alphanumeric or backslash in array 4,9,10,11,12... can anyone resolve them <?PHP $hosts = array( array("ronmexico.kainalopallo.com/","beforename=$F_firstname%20$F_lastname&gender=$F_gender","Your Ron Mexico Name is ","/the ultimate disguise, is <u><b>([^<]+)<\/b><\/u>/s"), array("www.fjordstone.com/cgi-bin/png.pl","gender=$F_gender&submit=Name%20Me","Your Pagan name is ","/COLOR=#000000 SIZE=6> *([^<]*)<\/FONT>/"), array("rumandmonkey.com/widgets/toys/mormon/index.php","gender=$F_gender&firstname=$F_firstname&surname=$F_lastname","Your Mormon Name is ","/<p>My Mormon name is <b>([^<]+)<\/b>!<br \/>/s"), array("cyborg.namedecoder.com/index.php","acronym=$F_firstname&design=edox&design_click-edox.x=0&design_click-edox.y=0&design_click-edox=edo","","Your Cyborg Name is ","/<p>([^<]+)<\/p>/"), array("rumandmonkey.com/widgets/toys/namegen/10/","nametype=$brit&page=2&id=10&submit=God%20save%20the%20Queen!&name=$F_firstname%20$F_lastname","Your Very British Name is ","/My very British name is \&lt\;b\>([^&]+)\<\/b\>\.\<br/"), array("blazonry.com/name_generator/usname.php","realname=$F_firstname+$F_lastname&gender=$F_gender","Your U.S. Name is ","/also be known as <font size=\'\+1\'><b>([^<]+)<\/b>/s"), array("www.spacepirate.org/rogues.php","realname=$F_firstname%20$F_lastname&formentered=Yes&submit=Arrrgh","Your Space Pirate name is ","/Your pirate name is <font size=\'\+1\'><b>([^<]+)<\/b><\/font>/s"), array("rumandmonkey.com/widgets/toys/ghetto/","firstname=$F_firstname&lastname=$F_lastname","Your Ghetto Name is ","/<p align=\"center\" style=\"font-size: 36px\">\s*<br \/>\s*([^<]*)<br \/>/"), array("www.emmadavies.net/vampire/default.aspx","mf=$emgender&firstname=$F_firstname&lastname=$F_lastname&submit=Find+My+Vampire+Name","","Your Vampire Name is ","/<i class=\"vampirecontrol vampire name\">([^<]*)<\/i>/"), array("www.emmadavies.net/fairy/default.aspx","mf=$emgender&firstname=$F_firstname&lastname=$F_lastname&submit=Seek+Fairy","","Your Fairy Name is ","/<i class=\'ng fairy name\'>([^<]*)<\/i>/"), array("www.irielion.com/israel/reggaename.html","phase=3&oldname=$F_firstname%20$F_lastname&gndr=$reggender","","Your Rasta Name is ","/Yes I, your irie new name is ([^\n]*)\n/"), array("www.ninjaburger.com/fun/games/ninjaname/ninjaname.php","realname=$F_firstname+$F_lastname","Your Ninja Burger Name is ","/<BR>Ninja Burger ninja name will be<BR><BR><FONT SIZE=\'\+1\'>([^<]*)<\/FONT>/"), array("gangstaname.com/pirate_name.php","sex=$F_gender&name=$F_firstname+$F_lastname","Your Pirate Name is ","/<p><strong>We\'ll now call ye:<\/strong><\/p> *<h2 class=\"newName\">([^<]*)<\/h2>/"), array("www.xach.com/nerd-name/","name=$F_firstname+$F_lastname&gender=$F_gender","Your Nerd Name is ","/<p><div align=center class=\"nerdname\">([^<]*)<\/div>/"), array("rumandmonkey.com/widgets/toys/namegen/5941/","page=2&id=5941&nametype=$dj&name=$F_firstname+$F_lastname","Your DJ Name is ","/My disk spinnin nu name is &lt\;b&gt\;([^<]*)&lt\;\/b&gt\;\./"), array("pizza.sandwich.net/poke/pokecgi.cgi","name=$F_firstname%20$F_lastname&color=black&submit=%20send%20","Your Pokename is ","/Your Pokéname is: <h1>([^<]*)<\/h1>/") ); return $hosts; ?>

Read the article

php split array into smaller even arrays

- by SoulieBaby

Read the article

Week in Geek: New Security Flaw Confirmed for Internet Explorer Edition

- by Asian Angel

This week we learned how to use a PC to stay entertained while traveling for the holidays, create quality photo prints with free software, share links between any browser and any smartphone, create perfect Christmas photos using How-To Geek’s 10 best how-to photo guides, and had fun decorating Firefox with a collection of Holiday 2010 Personas themes. Photo by Repoort. Random Geek Links Photo by Asian Angel. Critical 0-Day Flaw Affects All Internet Explorer Versions, Microsoft Warns Microsoft has confirmed a zero-day vulnerability affecting all supported versions of Internet Explorer, including IE8, IE7 and IE6. Note: Article contains link to Microsoft Security Advisory detailing two work-arounds until a security update is released. Hackers targeting human rights, indie media groups Hackers are increasingly hitting the Web sites of human rights and independent media groups in an attempt to silence them, says a new study released this week by Harvard University’s Berkman Center for Internet & Society. OpenBSD: audits give no indication of back doors So far, the analyses of OpenBSD’s crypto and IPSec code have not provided any indication that the system contains back doors for listening to encrypted VPN connections. But the developers have already found two bugs during their current audits. Sophos: Beware Facebook’s new facial-recognition feature Facebook’s new facial recognition software might result in undesirable photos of users being circulated online, warned a security expert, who urged users to keep abreast with the social network’s privacy settings to prevent the abovementioned scenario from becoming a reality. Microsoft withdraws flawed Outlook update Microsoft has withdrawn update KB2412171 for Outlook 2007, released last Patch Tuesday, after a number of user complaints. Skype: Millions still without service Skype was still working to right itself going into the holiday weekend from a major outage that began this past Wednesday. Mozilla improves sync setup and WebGL in Firefox 4 beta 8 Firefox 4.0 beta 8 brings better support for WebGL and introduces an improved setup process for Firefox Sync that simplifies the steps for configuring the synchronization service across multiple devices. Chrome OS the litmus test for cloud The success or failure of Google’s browser-oriented Chrome OS will be the litmus test to decide if the cloud is capable of addressing user needs for content and services, according to a new Ovum report released Monday. FCC Net neutrality rules reach mobile apps The Federal Communications Commission (FCC) finally released its long-expected regulations on Thursday and the related explanations total a whopping 194 pages. One new item that was not previously disclosed: mobile wireless providers can’t block “applications that compete with the provider’s” own voice or video telephony services. KDE and the Document Foundation join Open Invention Network The KDE e.V. and the Document Foundation (TDF) have both joined the Open Invention Network (OIN) as licensees, expanding the organization’s roster of supporters. Report: SEC looks into Hurd’s ousting from HP The scandal surrounding Mark Hurd’s departure from the world’s largest technology company in August has officially drawn attention from the U.S. Securities and Exchange Commission. Report: Google requests delay of new Google TVs Google TV is apparently encountering a bit of static that has resulted in a programming change. Geek Video of the Week This week we have a double dose of geeky video goodness for you with the original Mac vs PC video and the trailer for the sequel. Photo courtesy of Peacer. Mac vs PC Photo courtesy of Peacer. Mac vs PC 2 Trailer Random TinyHacker Links Awesome Tools To Extract Audio From Video Here’s a list of really useful, and free tools to rip audio from videos. Getting Your iPhone Out of Recovery Mode Is your iPhone stuck in recovery mode? This tutorial will help you get it out of that state. Google Shared Spaces Quickly create a shared space and collaborate with friends online. McAfee Internet Security 2011 – Upgrade not worthy of a version change McAfee has released their 2011 version of security products. And as this review details, the upgrades are minimal when compared to their 2010 products. For more information, check out the review. 200 Countries Plotted Hans Rosling’s famous lectures combine enormous quantities of public data with a sport’s commentator’s style to reveal the story of the world’s past, present and future development. Now he explores stats in a way he has never done before – using augmented reality animation. Super User Questions Enjoy looking through this week’s batch of popular questions and answers from Super User. How to restore windows 7 to a known working state every time it boots? Is there an easy way to mass-transfer all files between two computers? Coffee spilled inside computer, damaged hard drive Computer does not boot after ram upgrade Keyboard not detected when trying to install Ubuntu 10.10 How-To Geek Weekly Article Recap Have you had a super busy week while preparing for the holiday weekend? Then here is your chance to get caught up on your reading with our five hottest articles for the week. Ask How-To Geek: Rescuing an Infected PC, Installing Bloat-free iTunes, and Taming a Crazy Trackpad How to Use the Avira Rescue CD to Clean Your Infected PC Eight Geektacular Christmas Projects for Your Day Off VirtualBox 4.0 Rocks Extensions and a Simplified GUI Ask the Readers: How Many Monitors Do You Use with Your Computer? One Year Ago on How-To Geek Here are more great articles from one year ago for you to read and enjoy during the holiday break. Enjoy Distraction-Free Writing with WriteMonkey Shutter is a State of Art Screenshot Tool for Ubuntu Get Hex & RGB Color Codes the Easy Way Find User Scripts for Your Favorite Websites the Easy Way Access Your Unsorted Bookmarks the Easy Way (Firefox) The Geek Note That “wraps” things up for this week and we hope that everyone enjoys the rest of their holiday break! Found a great tip during the break? Then be sure to send it in to us at [email protected]. Photo by ArSiSa7. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Simon’s Cat Explores the Christmas Tree! [Video] The Outdoor Lights Scene from National Lampoon’s Christmas Vacation [Video] The Famous Home Alone Pizza Delivery Scene [Classic Video] Chronicles of Narnia: The Voyage of the Dawn Treader Theme for Windows 7 Cardinal and Rabbit Sharing a Tree on a Cold Winter Morning Wallpaper An Alternate Star Wars Christmas Special [Video]

Read the article

Generating a twitter OAuth access key - the semi-manual way

- by Piet

[UPDATE] Apparently someone at Twitter was listening, or I’m going senile/blind. Let’s call it a combination of both. Instead of following all the steps below, you could just login with the Twitter account you want to use on http://dev.twitter.com, register your application and then click ‘Edit Details’ on the application overview page at http://dev.twitter.com/apps. Next click the ‘Application detail’ button on the right, followed by the ‘My Access Token’ button in order to get your Access Token and Access Token Secret. This makes the old post below rather obsolete. Clearly a case of me thinking everything is a nail and ruby is a hammer (don’t they usually say this about java coders?) [ORIGINAL POST] OAuth is great! OAuth allows your application to use your user’s data without the need to ask for their password. So Twitter made the API much safer for their and your users. Hurray! Free pizza for everyone! Unless of course you’re using the Twitter API for your own needs like running your own bot and don’t need access to other user’s data. In such cases a simple username/password combination is more than enough. I can understand however that the Twitter guys don’t really care that much about these exceptions(?). Most such uses for the API are probably rather spammy in nature. !!! If you have a twitter app that uses the API to access external user’s data: look for another solution. This solution is ONLY meant when you ONLY need access to your own account(s) through the API. Other Solutions Mr Dallas Devries posted a solution here which involves requesting and scraping a one-time PIN. But: I like to minimize the amount of calls I make to twitter’s API or pages to lessen my chances of meeting the fail whale. Also, as soon as the pin isn’t included in a div called ‘oauth_pin’ anymore, this will fail. However, mr Devries’ post was a starting point for my solution, so I’m much obliged to him posting his findings. Authenticating with the Twitter API: old vs new Acessing The Twitter API the old way: require ‘twitter’ httpauth = Twitter::HTTPAuth.new('my_account','my_secret_password') client = Twitter::Base.new(httpauth) client.update(‘Hurray!’) The OAuth way: require 'twitter' oauth = Twitter::OAuth.new('ve4whatafuzzksaMQKjoI', 'KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY') oauth.authorize_from_access('123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis', 'fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh') client = Twitter::Base.new(oauth) client.update(‘Hurray!’) In the above case, ve4whatafuzzksaMQKjoI is the ‘consumer key’ (sometimes also referred to as ‘consumer token’) and KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY is the ‘consumer secret’. You’ll get these from Twitter when you register your app. 123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis is the ‘access token’ and fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh is the ‘access secret’. This combination gives the registered application access to your account. I’ll show you how to obtain these by following the steps below. (Basically you’ll need a bunch of keys and you’ll have to jump a bit through hoops to obtain them for your server/bot. ) How to get these keys 1. Surf to the twitter apps registration page go to http://dev.twitter.com/apps to register your app. Login with your twitter account. 2. Register your application Enter something for Application name, Description, website,… as I said: they make you jump through hoops. If you plan on using the API to post tweets, Your application name and website will be used in the ‘5 minutes ago via…’ line below your tweet. You could use the this to point to a page with info about your bot, or maybe it’s useful for SEO purposes. For application type I choose ‘browser’ and entered http://www.hadermann.be/callback as a ‘Callback URL’. This url returns a 404 error, which is ideal because after giving our account access to our ‘application’ (step 6), it will redirect to this url with an ‘oauth_token’ and ‘oauth_verifier’ in the url. We need to get these from the url. It doesn’t really matter what you enter here though, you could leave it blank because you need to explicitely specify it when generating a request token. You probably want read&write access so set this at ‘Default Access type’. 3. Get your consumer key and consumer secret On the next page, copy/paste your ‘consumer key’ and ‘consumer secret’. You’ll need these later on. You also need these as part of the authentication in your script later on: oauth = Twitter::OAuth.new([consumer key], [consumer secret]) 4. Obtain your request token run the following in IRB to obtain your ‘request token’ Replace my fake consumer key and consumer secret with the one you obtained in step 3. And use something else instead http://www.hadermann.be/callback: although this will only give a 404, you shouldn’t trust me. irb(main):001:0> require 'oauth' irb(main):002:0> c = OAuth::Consumer.new('ve4whatafuzzksaMQKjoI', 'KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY', {:site => 'http://twitter.com'}) irb(main):003:0> request_token = c.get_request_token(:oauth_callback => 'http://www.hadermann.be/callback') irb(main):004:0> request_token.token => "UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1" This (UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1) is the request token: Copy/paste this token, you will need this next. 5. Authorize your application surf to https://api.twitter.com/oauth/authorize?oauth_token=[the above token], for example: https://api.twitter.com/oauth/authorize?oauth_token=UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1 This will bring you to the ‘An application would like to connect to your account’- screen on Twitter where you can grant access to the app you just registered. If you aren’t still logged in, you need to login first. Click ‘Allow’. Unless you don’t trust yourself. 6. Get your oauth_verifier from the redirected url Your browser will be redirected to your callback url, with an oauth_token and oauth_verifier parameter appended. You’ll need the oauth_verifier. In my case the browser redirected to: http://www.hadermann.be/callback?oauth_token=UrperqaukeWsWt3IAlfbxzyBUFpwWIcWkHP94QH2C1&oauth_verifier=waoOhKo8orpaqvQe6rVi5fti4ejr8hPeZrTewyeag Which returned a 404, giving me the chance to copy/paste my oauth_verifier: waoOhKo8orpaqvQe6rVi5fti4ejr8hPeZrTewyeag 7. Request an access token Back to irb, use the oauth_verifier to request an access token, as follows: irb(main):005:0> at = request_token.get_access_token(:oauth_verifier => 'waoOhKo8orpaqvQe6rVi5fti4ejr8hPeZrTewyeag') irb(main):006:0> at.params[:oauth_token] => "123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis" irb(main):007:0> at.params[:oauth_token_secret] => "fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh" We’re there! 123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis is the access token. fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh is the access secret. Try it! Try the following to post an update: require 'twitter' oauth = Twitter::OAuth.new('ve4whatafuzzksaMQKjoI', 'KliketyklikspQ6qYALcuNandsomemored8pQ6qYALIG7mbEQY') oauth.authorize_from_access('123-owhfmeyAgfozdyt5hDeprSevsWmPo5rVeroGfsthis', 'fGiinCdqtehMeehiddenymDeAsasaawgGeryye8amh') client = Twitter::Base.new(oauth) client.update(‘Cowabunga!’) Now you can go to your twitter page and delete the tweet if you want to.

Search Results

Search found 161 results on 7 pages for 'pizza'.

Page 6/7 | < Previous Page | 2 3 4 5 6 7 | Next Page >

- by MakingScienceFictionFact

- by Phliplip

- by pinaldave

- by BuckWoody

- by Fatherjack

- by Brian Schroer

- by DigitalGeekery

- by Rob Foster

- by Asian Angel

- by David Toy

- by Laurent Luce

- by jmau5

- by Marcelo

- by Mysticgeek

- by Matthew Guay

- by Lewis Benge

- by The Geek

- by dapostolov

- by user551068

- by SoulieBaby

- by Asian Angel

- by Piet

< Previous Page | 2 3 4 5 6 7 | Next Page >