Search Results

Search found 530 results on 22 pages for 'sean farrell'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 6/22 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Troubleshooting major performance issue: Is culprit Intel RST, Hard drive, or something else?

    - by Sean Killeen
    The Setup I have the following components that come into play in this situation: ASUS P8Z68 V/PRO motherboard a RAID1 configuration (1x 1TB drive, 1 x 2TB drive -- I explain below), accelerated with an SSD using Intel's RST software, and 1 TB drive standing by as a spare. Core i7 2600k 32 GB RAM Windows 8.1 This box was designed to be beast, and until just recently, was very good at being just that. What's Happening The system has slowed to a crawl whenever it touches the disk. Things appear to work at normal speed when dealing with memory. For example, typing this is fine, but saving it to disk from notepad gave me a 5-7 second pause when clicking save. The disks appear to be at 100% all the time (e.g. the light on the disk access on the PC is solidly on -- not even any flashing) In ProcExp it appears that the disk is barely being utilized at all: Intel RST reports that everything is fine: Other Details Prior to this happening, RST had reported that my drives were failing (one went bad, one was throwing SMART events). This made sense; they were at the tail end of their warranty and the PC is on almost all the time. I RMA'd the drives via Seagate. In the meantime, I'd purchased a 2TB drive because I didn't realize that the 1TB drives were under warranty. I figured I'd replace the other 1 TB drive with another 2 TB when it died but then discovered the warranty. AFAIK, I haven't done any major updates since 8.1 and it worked fine after those. Question(s) How can I troubleshoot this? What is the best way to try to figure out why disks are being maxed out despite the OS reporting barely any disk usage and that everything is OK? Given the failures, etc. that I describe above, is it possible that the problem could be the I/O on the motherboard itself? If so, how would I even be able to diagnose it? I'm betting the drives that Seagate gave me are refurbished (didn't think to look; that's dumb). Is it possible that the same model drive, refurbished, could somehow cause this? In terms of how RAID1 works, is it possible that one drive is "falling behind" somehow, and that the RAID1 is constantly trying to fix the mirroring? If so, this seems like Intel RST would report on it, but I wanted to consider it as an option.

    Read the article

  • Work firewall blocking Gmail IMAP port

    - by Sean
    My work has a very over protective firewall. We use Google Apps for our email and so can access the web interface just fine. I use my laptop at work however (MacBook connected via WiFi through my AirPort Express), and prefer to use Sparrow to check my email. The problem is that our firewall blocks whatever port Gmail's IMAP server uses. I'm trying to figure out the easiest way to work around this. I'm guessing I'll need to use an SSH tunnel or VPN, but I'm looking for specific instructions. I'd prefer to only route the IMAP stuff around the firewall as opposed to using a VPN full time. I have two computers at home (one PC, one Mac Mini) that are always on and could probably act as a server if needed.

    Read the article

  • Filemaker 10 Advanced sending email via script & SMTP

    - by Sean
    We are using a windows server box to run the databases but we have found via the headers that the emails are send from the local workstation. We have moved to a new email system and have set up a local linux server to securely send email out of our network to devices that do not support new protocols and encryption. But once we set up the script in filemaker 10 advanced (the local machine os x) we set it to the ip of our local box with no authentication but it does not send out an email. It creates a connection we see in the logs on the linux box but nothing more, additionally you can start a telnet connection with no issues. We have also made sure that there are no additional issue that we can see in our firewall policies. Any ideas where we should start? Does Filemaker 10 advanced log errors anywhere because I could not find any log files.

    Read the article

  • SQL Server Maintenence Plan error on an offline Database

    - by Sean Earp
    Today is SQL day for me :) I have a maintenance plan that is failing to run with the following error: Failed:(-1073548784) Executing the query "USE [SharedServices1_DB]" failed with the following error: "Database 'SharedServices1_DB' cannot be opened because it is offline.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. where SharedServices1_DB is a database that is set to offline. I would like to exclude this database from the maintenance plan, but when the database is offline, it does not show up at all as a "specific database" in the maintenance plan task, and if I bring it online, it is already unchecked in the maintenance plan task. How can I exclude an offline database from a maintenance plan?

    Read the article

  • Unable to get squid working for remote users

    - by Sean
    I am trying to setup squid 3.2.4, but I have not been able to get it working for remote users. Works fine locally. Unable to figure out what I am doing wrong... http_port 3128 transparent ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/usr/share/ssl-cert/myCA.pem refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 acl localnet src 10.0.0.0/8 # RFC 1918 possible internal network acl localnet src 172.16.0.0/12 # RFC 1918 possible internal network acl localnet src 192.168.0.0/16 # RFC 1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access allow localhost http_access allow localnet http_access allow all cache deny all via off forwarded_for off header_access From deny all header_access Server deny all header_access WWW-Authenticate deny all header_access Link deny all header_access Cache-Control deny all header_access Proxy-Connection deny all header_access X-Cache deny all header_access X-Cache-Lookup deny all header_access Via deny all header_access Forwarded-For deny all header_access X-Forwarded-For deny all header_access Pragma deny all header_access Keep-Alive deny all acl ip1 localip 1.1.1.90 acl ip2 localip 1.1.1.91 acl ip3 localip 1.1.1.92 acl ip4 localip 1.1.1.93 acl ip5 localip 1.1.1.94 tcp_outgoing_address 1.1.1.90 ip1 tcp_outgoing_address 1.1.1.91 ip2 tcp_outgoing_address 1.1.1.92 ip3 tcp_outgoing_address 1.1.1.93 ip4 tcp_outgoing_address 1.1.1.94 ip5 tcp_outgoing_address 1.1.1.90

    Read the article

  • Unable to remove "Run this program as an administrator" (greyed out) with Excel 2010

    - by Sean Hu
    I have issue with one of the user in Terminal Server 2008 R2 who has "Run this program as an administrator" checked and greyed out with Excel 2010. This causes UAC to popup requesting for administrator credential whenever user want to start excel. I found in excel 2010 properties Compatibility tab "Run this program as an administrator" is checked and greyed out (Unable to make any change) This issue only occurs in Excel 2010, all other Office programs does not has this option checked and greyed out. Currently UAC is set to Default (Second level to top) Other users in terminal server do not have "Run this program as an administrator" checked and it is NOT greyed out. The user who has issue is in the same group and has the setting as other users who doesn't has the issue in AD. Could anyone advise me how could I remove this "Run this program as an administrator" in option in Excel 2010? Thank you.

    Read the article

  • Configuring Windows 2003 As A Router

    - by Sean M
    I am trying to configure a Windows 2003 server to act as a router, so that the two subnetworks that I'm dealing with can communicate with one another without NAT. I am mostly sure that I have configured Windows 2003 incorrectly, and I'm finding it very difficult to drill down through Google results to something helpful. I have a 192.168.1.0/24 network that is my "production" network (in the sense that I'm in trouble if I screw it up) and a 10.0.0.0/8 network that is my test network. The 192.168.1.0 network is ruled by a gateway whose routing table looks like this (my address redacted): The Windows 2003 server, "prime," is multihomed. Its network adapters are at 192.168.1.122, (as seen above), 10.0.0.1, and 10.0.0.2. I added the Routing and Remote Access role to it, and enabled LAN routing. I do not have it using RIP or other routing protocols. Its current routing table is shown below. To me, it looks like all of the right routes are there for traffic to pass between the 192.168.1.0 network and the 10.0.0.0 network. However, traffic does not pass. The 10.0.0.11 and .12 clients cannot be contacted from the 192.168.1.0 network. When I use traceroute to try to get to them, the trace gets to the Windows 2003 server's 192.168.1.122 address, then produces nothing but "* * *" timeouts. When I try to traceroute to 192.168.1.1 from a 10.0.0.0-network client, I get "destination host unreachable." However, I know that the routing is working at least a little, because from the 192.168.1.0 network, I can connect to the Windows server just fine by referring to it as 10.0.0.1. What static routes would allow me to contact 10.0.0.11 and .12 from the 192.168.1.0 network? Is it possible to tell the Windows server "since you are a DHCP/DNS server, you already know routes to get to machines that are getting IP addresses from you, please add those to your routing table" ? Will using RIP or OSPF on the Windows server actually be helpful in this situation?

    Read the article

  • VMware Fusion won't boot my Boot Camp partition

    - by Sean
    I have a Boot Camp partition on my MacBook that I would ultimately like to convert to a VMware virtual machine image. I've installed VMware Fusion and tried to start up my Boot Camp install using the Boot Camp button on the initial welcome screen. It brings up the "VMware Fusion is preparing your Boot Camp partition to run as a virtual machine" dialog, but afterward it shows an error dialog with the following message: Boot Camp partition preprocessing failed. You may not be able to boot your Boot Camp partition as a virtual machine. It then tries to boot the new VM, but it blue screens during the boot process. The info on the blue screen doesn't provide much in the way of help though. Running chkdsk has no effect. After searching around, some people recommended using VMware's stand-alone converter utility from within Windows to create an image, but the utility said it couldn't create an image because my disk uses a GUID Partition Table (GPT). I'm wondering if this is why it can't boot my BC partition from Fusion. Has anyone else run into this and found a fix?

    Read the article

  • Is it possible to re-lock a bitlocker drive?

    - by Sean Edwards
    I'm running a partition with bitlocker on a Windows 7 Ultimate machine, which contains secure data that I have to recover infrequently. Unlocking it to access the data is obviously no problem, but is there a way to re-lock the partition when I'm done? The best I've found so far is this: http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/41607938-7452-440d-8253-67fe8657bc0f Currently I have a .bat script on that drive that I can run as administrator, and that re-locks the drive, but it feels like kind of a hackish solution. Does anyone have anything better? Any idea when Microsoft might release a fix for this?

    Read the article

  • Using radvd to advertise ipv6 over VPN connection using DD-wrt

    - by Sean Madden
    My ultimate goal is to allow VPN users to have access to my internal IPv6 network from across the intertubes. I've got a linksys WRT54GSv2 running DD-WRTv24SP1 and have configured the little guy as specified here http://www.dd-wrt.com/wiki/index.php/IPv6 and it works wonderfully over the br0 interface (LAN/WLAN bridge). Here's the issue though, when I add an additional interface to the radvd config file on the router (specifically ppp0, for the VPN traffic), radvd refuses to start. The kicker is that on DDWRT, it doesn't give an error message, it just fails outright. Any suggestions on where to proceed from here? /jffs/radvd.conf: interface br0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; interface ppp0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; The documentation I've found for radvd is slim, but if anyone has a decent idea on how to proceed I'd love to hear it.

    Read the article

  • Binding to LDAPS using PHP failing

    - by Sean
    We've finally set-up our server to accept ldap SSL connections thanks to another question answered by a helpful member. Our problem now is that when attempting to bind to ldap using the below simple PHP script, we constantly fail. Binding using ldap instead of ldaps works just fine using the script so I know the ldap is enabled. The catcher is that while using LDP.exe, we can successfully connect and bind to ldap on port 636 using a secure connection. The script we are failing with is below: <?php $ldap = ldap_connect("ldaps://localhost"); $username="user"; $password="pass"; if($bind = ldap_bind($ldap, $username,$password )) echo "logged in"; else echo "fail"; echo "<br/>done"; ?> We've also attempted inputting the username as "user@domain" or "domain/user" with no success. It seems I'm forever having LDAP/Cert questions. Our environment is Server 2008.

    Read the article

  • Unable to access internal network through PfSense WAN port

    - by Sean
    Our branch office is unable to connect to our internal network for some reason. However we can connect to the branch office domain controller from behind PfSense. The following is our setup: |Branch DC - 192.168.0.101 | |Branch Firewall - 192.168.0.2 | |(Internet) | |Local Firewall - 192.168.3.1 | |PFSense WAN port - 192.168.3.100 |PFSense LAN port - 192.168.1.1 | | DC1 - 192.168.1.2|DC2 - 192.168.1.4 Branch DC can ping and connect to PFSense WebGUI on the WAN port successfully (we set this up using the PfSense documentation). DC1 and DC2 can connect outbound to the Branch DC. There seems to be a rule that prevents internal access on the WAN port. However our rules are set to allow all traffic on the LAN and WAN ports. It would be ideal to just disable the firewall altogether since we already have a firewall but when we do this, PfSense doesn't allow any internal traffic at all. I look forward to any assistance and thank you ahead of time.

    Read the article

  • Utility to Monitor Kill / Restart Rogue Process?

    - by Sean O
    Hi, I need a Windows (XP/7) utility to continuously monitor always-running processes and kill them (and optionally restart them) if they hang. There are a lot of interactive tools out there (Sysinternals, most notably). But I have a program on a little-used workstation that needs to run continuously and reliably, both of which are not two of its strong suits :) It requires continual babysitting, and I'd rather just have a monitoring utility (even a paid one) that can kill/restart it on definable conditions -- e.g. CPU 80%, Status of "Not Responding", etc.

    Read the article

  • windows 7 wireless knocks off other computers on the network

    - by Sean
    I am trying to fix a wireless network issue. When a new windows 7 machine (we have 2 in the house) we have problems with any other windows xp machines connecting to the wireless network. I am using a linksys WRT110 running Firmware Version: 1.0.04 (which is not the latest firmware its Ver.1.0.07 but the router would not use the bin update file). I have tried a ton of variations in setting for the wireless network, changed the channel, the security level (none, wep wpa, wpa2), network type (g,bg mixed). I have also read some stuff about homegroup settings for windows 7 but have not seen any differences that make a difference. Basically windows 7 does not like to connect to our network but when I manage to get it to work the windows xp pro machines get kicked off. The windows xp pro machines are a few years old but both windows 7 machines are less than 6 months old.

    Read the article

  • Can ping device from one computer and not the other

    - by Sean Duggan
    I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

    Read the article

  • SELinux blocking Samba directory listing

    - by Sean M
    I am running Samba on a CentOS server, and I am experiencing a problem where it allows me to connect to the server and see a share, but shows the share as an empty directory. I find this behavior strange. Here is the stanza in my smb.conf for the given share: [seanm] path = /home/seanm writeable = yes valid users = seanm, root read only = No Here's what I see on the server side: [seanm@server ~]$ ls -l -rw-r--r-- 1 seanm seanm 40 Jan 4 13:45 pangram.txt And yet: [seanm@client ~]$ smbclient //server/seanm -U seanm -W WORKGROUP Enter seanm's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1] smb: \> ls . D 0 Fri Jan 7 10:08:55 2011 .. D 0 Fri Jan 7 07:58:31 2011 58994 blocks of size 262144. 50356 blocks available This behavior is present on both a Windows client and a Linux client system. The behavior is present with the firewall on and with the firewall off, so it's not that. Neither /var/log/messages nor /var/log/secure have any complaints about Samba. I doubt that SELinux is a problem: just in case, here are the relevant settings. [root@server ~]# getsebool -a | grep samba samba_domain_controller --> off samba_enable_home_dirs --> on samba_export_all_ro --> off samba_export_all_rw --> off samba_share_fusefs --> off samba_share_nfs --> off use_samba_home_dirs --> on virt_use_samba --> off What am I doing wrong here, and what can I do to fix it? Edit: SELinux probably is the problem, judging by the fact that the issue goes away when I set SELinux to "permissive" or issue setsebool -P samba_export_all_rw on - both of which are unacceptable for production environments. What the heck kind of context does a directory need to have on it for Samba users to actually get files from it? I consider rolling your own rules and/or context to be deeply sub-optimal.

    Read the article

  • Allowing XP Home Clients To Access Active Directory Printers

    - by Sean M
    My school's network is based on Active Directory on Windows Server 2003 servers. Most of the computers in the school are members of the domain. However, we also acquired a passel of netbooks that are running Windows XP Home (as netbooks tend to), and we're trying to make those useful. The netbooks are made available to students by check-out, so none of them are dedicated to a specific user. I only want to allow the netbooks to do two significant network activities: to access the Internet (this is working acceptably well so far), and to print to one or more printers on the network. That second one is where trouble starts. I'm trying to find a way to allow the XP Home clients to access those Active Directory printers. All the solutions that I can come up with right now are expensive, ugly, or both - for example, changing the OS on the netbooks (even with imaging, that would take a lot of my time) or making sure that the user account on each netbook has a matching account in Active Directory with permissions for printing (invites security/maintainability disaster). Are there any elegant solutions? Failing that, what's the best ugly solution for allowing my students to print from the netbooks?

    Read the article

  • Bridging VirtualBox over OpenVPN TAP adapter on Windows

    - by Sean Edwards
    I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

    Read the article

  • Is there a macro to split the contents of an Excel spreadsheet into seperate spreadhseets?

    - by Sean Chadwick
    I know there are similar questions out there but I don't think they are quite the same. I have a excel spreadsheet with the following headings- First name -- Surname -- Host Trust -- Contact details -- etc -- etc It is a large spreadsheet. I have to send an email every week to host trusts to inform them of who will be working with them and it is a nightmare dividing this up manually. Is it possible to create a macro which will split this spreadsheet into several spreadsheets using the the data from the Host Trust column as the title of each spreadsheet?

    Read the article

  • nginx 502 bad gateway - fastcgi not listening? (Debian 5)

    - by Sean
    I have experience with nginx but it's always been pre-installed for me (via VPS.net pre-configured image). I really like what it does for me, and now I'm trying to install it on my own server with apt-get. This is a fairly fresh Debian 5 install. I have few extra packages installed but they're all .deb's, no manual compiling or anything crazy going on. Apache is already installed but I disabled it. I did apt-get install nginx and that worked fine. Changed the config around a bit for my needs, although the same problem I'm about to describe happens even with the default config. It took me a while to figure out that the default debian package for nginx doesn't spawn fastcgi processes automatically. That's pretty lame, but I figured out how to do that with this script, which I found posted on many different web sites: #!/bin/bash ## ABSOLUTE path to the PHP binary PHPFCGI="/usr/bin/php5-cgi" ## tcp-port to bind on FCGIPORT="9000" ## IP to bind on FCGIADDR="127.0.0.1" ## number of PHP children to spawn PHP_FCGI_CHILDREN=10 ## number of request before php-process will be restarted PHP_FCGI_MAX_REQUESTS=1000 # allowed environment variables sperated by spaces ALLOWED_ENV="ORACLE_HOME PATH USER" ## if this script is run as root switch to the following user USERID=www-data ################## no config below this line if test x$PHP_FCGI_CHILDREN = x; then PHP_FCGI_CHILDREN=5 fi ALLOWED_ENV="$ALLOWED_ENV PHP_FCGI_CHILDREN" ALLOWED_ENV="$ALLOWED_ENV PHP_FCGI_MAX_REQUESTS" ALLOWED_ENV="$ALLOWED_ENV FCGI_WEB_SERVER_ADDRS" if test x$UID = x0; then EX="/bin/su -m -c \"$PHPFCGI -q -b $FCGIADDR:$FCGIPORT\" $USERID" else EX="$PHPFCGI -b $FCGIADDR:$FCGIPORT" fi echo $EX # copy the allowed environment variables E= for i in $ALLOWED_ENV; do E="$E $i=${!i}" done # clean environment and set up a new one nohup env - $E sh -c "$EX" &> /dev/null & When I do a "ps -A | grep php5-cgi", I see the 10 processes running, that should be ready to listen. But when I try to view a web page via nginx, I just get a 502 bad gateway error. After futzing around a bit, I tried telneting to 127.0.0.1 9000 (fastcgi is listening on port 9000, and nginx is configured to talk to that port), but it just immediately closes the connection. This makes me think the problem is with fastcgi, but I'm not sure what I can do to test it. It may just be closing the connection because it's not getting fed any data to process, but it closes immediately so that makes me think otherwise. So... any advice? I can't figure it out. It doesn't help that it's 1AM, but I'm going crazy here!

    Read the article

  • mod_rewrite not working?

    - by Sean Kimball
    I have a bunch of non-existent urls that need to be redirected to new ones, though they are not working... mod_rewrite does work and is enabled, I'm wondering if the redirect URL has to actually exist in order for a redirect ot work. Here is what I have: Redirect 301 /cgi-bin/commerce.cgi?display=action&emptyoverride=yes&template=Assets/XHTML/Advantage.html http://domain.com/the-bag-to-nature-advantage.html UPDATE this is the request that comes in [indexed in google!] http://domain.com//cgi-bin/commerce.cgi?display=action&emptyoverride=yes&template=Assets/XHTML/Advantage.html this is where it needs to go: http://domain.com/the-bag-to-nature-advantage.html

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >