Search Results

Search found 460 results on 19 pages for 'stefan czarnecki'.

Page 6/19 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Centralized sudo sudoers file?

  - by Stefan Thyberg

  I am the admin of several different servers and currently there is a different sudoers file on each one. This is getting slightly out of hand as quite often I need to give someone permissions to do something with sudo but it only gets done on one server. Is there an easy way of editing the sudoers file just on my central server and then distributing it by SFTP or something like that to the other servers in an easy way? Mostly wondering how other sysadmins solve this problem, since the sudoers file doesn't seem to be remotely accessible with NIS, for example. Operating system is SUSE Linux Enterprise Server 11 64-bit, but it shouldn't matter. EDIT: Every machine will, for now, have the same sudoers file. EDIT2: The accepted answer's comment was the closest to what I actually went ahead and did. I am right now using an SVN-supported puppet-installation and after a few headaches, it's working very well.

  Read the article

• FreeBSD Ports: How can I see all dependencies, and all dependencies for those dependencies, for a port?

  - by Stefan Lasiewski

  I'm trying to build a port which depends on apache-ant. I thought I could run make build-depends-list to see all dependencies required by this port: # make build-depends-list /usr/ports/devel/apache-ant /usr/ports/java/jdk16 /usr/ports/math/gmp But after installing everything, the port had a dependency list which was a mile long: apache-ant-1.8.1 desktop-file-utils-0.15_2 gamin-0.1.10_4 gettext-0.18.1.1 gio-fam-backend-2.26.1 glib-2.26.1_1 gmp-5.0.1 inputproto-2.0 javavmwrapper-2.3.5 kbproto-1.0.4 libX11-1.3.3_1,1 libXau-1.0.5 libXdmcp-1.0.3 libXext-1.1.1,1 libXi-1.3,1 libXtst-1.1.0 libiconv-1.13.1_1 libpthread-stubs-0.3_3 libxcb-1.7 pcre-8.12 perl-5.10.1_3 pkg-config-0.25_1 python26-2.6.6 recordproto-1.14 unzip-6.0 xextproto-7.1.1 xproto How can I see all dependencies, and all subdependencies for a port?

  Read the article

• Windows 7 USB power lose after a few seconds / minutes

  - by Stefan Dunn

  My friend's computer has a problem where the USB ports causes problems with the power of some devices connected to the computer. The USB mouse has no problems, however the Wireless Adapter looses power after around 20 seconds of use and USB Flash Drives cause the computer to either freeze, lose power (and become unresponsive) or become disconnected (still shown in Device Manager, but not in My Computer) when trying to transfer any type of file to / from the computer. I have a suspicion it's the Motherboard but could it also be a Software problem? Tried a new case, RAM, CPU and GFX Card which had no effect. The problem occurs on both the Front USB and Back (Motherboard) USB Ports. UPDATE: Tried the USB devices with an Ubuntu Live CD and they work fine, could this mean it's a problem with Windows (x64)?

  Read the article

• How can I tell if I have PCI Express 2.0 or 2.1?

  - by Stefan Lasiewski

  I am looking at a variety of PCI Express cards, such as a SATA RAID Controller and a Video Card. Some of these cards say they only support PCI Express 2.1, not PCI Express 2.0. I know that my motherboard supports PCI Express 2-something, but the manual doesn't say '2.0' or '2.1'. How can I tell if the PCIe slot on my motherboard is PCI Express 2.0 or PCI Express 2.1? Is it possible to determine the PCIe type from the Windows or Linux commandline? I was under the impression that most PCI Express 2.1 devices are backwards compatible with PCI Express 2.0. Is it possible that the vendor is wrong in saying that PCI Express 2.1 is required?

  Read the article

• Unable to make my bios see my sata hdd

  - by Stefan

  I know there are many question about that, but I tried everything and I'm still not able to make my bios see my sata2 hdd. I've got a QDI motherbord with no sata port; only 2 ide ports. I had an old ide hdd, now i've removed it and bought a sata2 hdd. Since my pc has no sata slots i bouth a ide-to-sata adapter. So, i don't have any os installed on the new drive, and the old drive is removed. My problem is that I'm unable to see my hdd on bios. I suppose that my bios, since it's an old version, doesn't have sata drivers, but I don't know if I must install it and also I dont know how to do it. Anyone can help me?

  Read the article

• Automatically reconnect to ODBC sources?

  - by stefan.at.wpf

  I am using Asterisk 1.8.10.1 and a MySQL database connected via ODBC to store CDRs. When my MySQL database isn't available when Asterisk starts or has an outage while Asterisk is running, I would expect Asterisk to retry to connect to the database, but this doesn't happen! Anyone knows where I can enable some kidn of automatic reconnect to databases in Asterisk? My res_odbc.conf looks like this: [asterisk] enabled => yes dsn => asterisk-connector username => user password => pass pre-connect => yes pooling => no limit => 1 idlecheck => 1 negative_connection_cache => 1

  Read the article

• How do I force a server to leave a SharePoint farm

  - by Stefan

  I have two web servers in a SharePoint (WSS 3.0) farm with one database server for the config and content databases. I already moved my content databases to a new database server successfully. But when I tried to move the sharepoint config database using the "stsadm deleteconfigdb" and "stsadm setconfigdb" commands, one of my servers got stuck in an intermediate state. I was able to join one of the web servers with the config database on the new server, but the other server is not able to join because it believes it is already part of the farm (which it used to be, before the move). On the central administration it says the status of the services on the server is "stopping". Even after rebooting all servers involved, uninstalling SharePoint and what not, this status does not change, and because of it, I am not able to join the second server with the new config database. I get random error messages when trying to join the farm. I believe that if I can unstuck this server, it will be able to join the farm again. The farm believes the second server is already part of it, but the web server itself knows its not. Any ideas on how to forcefully kick out a server from the farm?

  Read the article

• Windows 8 Internet Explorer proxy automation script

  - by Stefan Bollmann

  Similar to this post, I'd like to change my proxy settings using a script. However, it fails. When I am behind the proxy, IE does not connect to the internet. Here I try the first solution from craig: function FindProxyForURL(url, host) { if (isInNet(myIpAddress(), "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } Also this test, where isInNet should surely return true does not help: function FindProxyForURL(url, host) { if (isInNet("myactualip", "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } **This script is saved as proxy.pac in c:\windows and my configuration is* in LAN settings: No automatically detected settings, yes, use automatic config script: file://c:/windows/proxy.pac No proxy server. *(i am not allowed to post screenshots..) So, what am I doing wrong? ---------------- update -------------- However, when I set up a proxy in my LAN configurations: IE -> Internet Options -> Connections -> LAN Settings check: Use a proxy Server for your LAN Address: <a pingable proxy> Port: <portnr> everything is fine for this environment. Now I try a simpler script like function FindProxyForURL(url, host) { return "PROXY <pingable proxy>:<portnr>; DIRECT"; } With a configuration described above** I am not able to get through the proxy.

  Read the article

• Where is the central ZFS website now?

  - by Stefan Lasiewski

  Oracle dumped OpenSolaris in Fall 2010, and it is unclear if Oracle will continue to publicly release updates to ZFS, except maybe after they release their next major version of Solaris. FreeBSD now has ZFS v28 available for testing. But where did v28 come from? I notice that the main ZFS website does not show version 28 available. Has this website been abandoned? If so, where is the central website for the ZFS project, so that I can browse the repo, read the mailing lists, read the release notes, etc. (I realize that OpenSolaris has been dumped by Oracle, and that they are limiting their ZFS releases to the community).

  Read the article

• Mac Terminal.app: Force '^C' to be printed when editing current prompt, then aborting it

  - by Stefan Lasiewski

  This is the opposite of Prevent “^C” from being printed when aborting editing current prompt. I'm using Bash. When I'm editing the commandline in Bash, and I hit Control-C to abort the commandline, the '^C' character does not display. I would like to see this character. I tried commands like stty -ctlecho and stty ctlecho (which I borrowed from the other question), but this didn't work for me. This behavior seems to be true with my environment on Ubuntu, CentOS and MacOSX. This only happens within Apple's Terminal.App. If I SSH to a remote Linux or FreeBSD box, then ^C is printed. So, this is clearly just a local setting. Update: Here is the output of stty -a, as requested by @quack quixote : $ stty -a speed 9600 baud; 41 rows; 88 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel iutf8 -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -oxtabs -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W; After typing stty sane, stty -a will output the following. The only difference is the parameter of -iutf8. $ stty sane $ stty -a speed 9600 baud; 41 rows; 157 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -iutf8 -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -oxtabs -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W;

  Read the article

• Bind a key to a commandline command in Mac OS X?

  - by Stefan Lasiewski

  I have a Mac Powerbook running Leopard (10.5.8). Does Leopard provide an easy way to bind keys to commands which are typically run on the commandline? For example, I can open up Terminal.app and run the command /System/Library/Frameworks/ScreenSaver.framework/Resources/ScreenSaverEngine.app/Contents/MacOS/ScreenSaverEngine which will activate the screensaver and lock my screen. What if I want to bind 'Apple-key L' to this command and execute this globally, regardless of which application is in use at the moment? Can I do this, or can I only run ScreenSaverEngine from a Terminal window? I tried to set up global keyboard shortcuts, but it seems that this won't allow me to bind a key to an arbitrary shell command: Note: You can create keyboard shortcuts only for existing menu commands. You cannot define keyboard shortcuts for general purpose tasks such as opening an application or switching between applications. I tried to set up a application keyboard shortcut, but commands like ScreenSaverEngine don't seem to be an application. Note that this Screensaver/Lock screen is just one example. I have come across other nifty commands which I might want to bind to a key-combination as well. I can do this in Gnome and Windows (with varying success). How about with Leopard? Should I be looking at doing this with AppleScript? (I haven't used that since the Hypercard days ...)

  Read the article

• Keep Windows Installer from using largest drive for temporary files

  - by stefan.at.wpf

  By default Windows Installer uses the largest drive for temporary storage, no matter if that's needed (meaning there would also be enough space on the system drive). Taken from http://msdn.microsoft.com/en-us/library/aa371372%28VS.85%29.aspx: During an administrative installation the installer sets ROOTDRIVE to the first connected network drive it finds that can be written to. If it is not an administrative installation, or if the installer can find no network drives, the installer sets ROOTDRIVE to the local drive that can be written to having the most free space. Now my system drive is an SSD, my largest drive is a RAID, that spins down when it's not used. Remember the SSD as system drive? Everything is silent now! Until I install something and Windows Installer wakes up my RAID again just to put a small .tmp file on it... How can I prevent Windows Installer from using the largest drive as temporary storage? Can I maybe set some access rights to disallow the Windows Installer to write on my RAID drive? Any other ideas? Thank you!

  Read the article

• Simple web-frontend for remote svn administration?

  - by Stefan Lasiewski

  We run a SVN repository. Some of our more advanced users need to be able to perform some SVN administration without relying on the system administrator. They need to be able to do things like create SVN repositories, delete SVN repositories,, and perform commands like 'svnadmin dump' and 'svnadmin load'. We'd like to avoid SSH access on these FreeBSD machines, and would rather provide a service interface through a Web UI. I'm looking for a simple script (or a small number of scripts) which use Perl or PHP. I found svnadmin or svnadmin.pl, but was hoping to find something with a larger user community or which has been recommended by others. It looks like Trac allows SVN administration, but comes with may more features then we need.

  Read the article

• Write STDOUT & STDERR to a logfile, also write STDERR to screen

  - by Stefan Lasiewski

  I would like to run several commands, and capture all output to a logfile. I also want to print any errors to the screen (or optionally mail the output to someone). Here's an example. The following command will run three commands, and will write all output (STDOUT and STDERR) into a single logfile. { command1 && command2 && command3 ; } > logfile.log 2>&1 Here is what I want to do with the output of these commands: STDERR and STDOUT for all commands goes to a logfile, in case I need it later--- I usually won't look in here unless there are problems. Print STDERR to the screen (or optionally, pipe to /bin/mail), so that any error stands out and doesn't get ignored. It would be nice if the return codes were still usable, so that I could do some error handling. Maybe I want to send email if there was an error, like this: { command1 && command2 && command3 ; } logfile.log 2&1 || mailx -s "There was an error" [email protected] The problem I run into is that STDERR loses context during I/O redirection. A '2&1' will convert STDERR into STDOUT, and therefore I cannot view errors if I do 2 error.log Here are a couple juicier examples. Let's pretend that I am running some familiar build commands, but I don't want the entire build to stop just because of one error so I use the '--keep-going' flag. { ./configure && make --keep-going && make install ; } > build.log 2>&1 Or, here's a simple (And perhaps sloppy) build and deploy script, which will keep going in the event of an error. { ./configure && make --keep-going && make install && rsync -av --keep-going /foo devhost:/foo} > build-and-deploy.log 2>&1 I think what I want involves some sort of Bash I/O Redirection, but I can't figure this out.

  Read the article

• How to enable "packet forwarding" in mac os x

  - by stefan

  How is it possible to enable packet forwarding in Mac OS X? Google gives me tons of hints for Windows and Linux but not for OS X. Thanks!

  Read the article

• SQL Server 2008 Replication Promotion

  - by Stefan Mai

  I have a 4 node cluster, 1 subscriber and 3 publishers, all running SQL Server 2008 R2 Enterprise. The intention is that if the subscriber goes down, we can use one of the publishers to quickly build up its replacement. Our testing reveals a problem though: the subcriber databases all have Not For Replication set to Yes on the identity columns so that they can maintain the identity set in the subscriber. This causes a problem when they become subscribers because now we don't have identity insert functionality: we get a primary key error. Any way to "promote" a subscriber to publisher?

  Read the article

• Admin mode on Procurve Switches

  - by stefan.at.wpf

  Not being a network expert, I spent some time configuring my network, until I found my mistake: On my HP ProCurve Switch 1810G, I thought that "Admin mode" means whether the administrative interface can be accessed from this port. Well, it means whether the port is enabled or not. Extract from the help function: Admin Mode - Select to enable the port-control administration state. Click to enable and have the port participate in the network.(Default : Enabled ) Well, of course I didn't read the help, because I didn't doubt it's for the adminsitrative interface and suspected an error somewhere else. Anyway, I am wondering if that is a commonly used term for enabling/disabling ports or if HP just wanted to make my life harder? I can't understand why this option isn't just called "Enable port"!? Here's a screenshot of how it looks in the web interface (yeah, shame on me for using a web interface)

  Read the article

• CentOS 5.6: How to resolve php53 RPM dependency conflict with php-mcrypt and php-common?

  - by Stefan Lasiewski

  We are running a CentOS 5.6 system, and want to install php53 with php-mcrypt. However, this introduces a dependency conflict between php-common & php53-common. Does anyone have a good workaround for this problem? host # yum install php-mcrypt Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: linux.mirrors.es.net Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-mcrypt.x86_64 0:5.1.6-15.el5.centos.1 set to be updated --> Processing Dependency: php-api = 20041225 for package: php-mcrypt --> Processing Dependency: php >= 5.1.6 for package: php-mcrypt --> Running transaction check ---> Package php.x86_64 0:5.1.6-27.el5_5.3 set to be updated --> Processing Dependency: php-cli = 5.1.6-27.el5_5.3 for package: php ---> Package php-common.x86_64 0:5.1.6-27.el5_5.3 set to be updated --> Running transaction check ---> Package php-cli.x86_64 0:5.1.6-27.el5_5.3 set to be updated --> Processing Conflict: php53-common conflicts php-common --> Finished Dependency Resolution php53-common-5.3.3-1.el5_6.1.x86_64 from installed has depsolving problems --> php53-common conflicts with php-common Error: php53-common conflicts with php-common You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest This is apparently a known problem (See php-devel, Bug 700179 and Bug 695708) and this post at the CentOS forums, but there is no official fix yet.

  Read the article

• FreeBSD Ports: How can I see all dependencies for a port, and all subdependencies for those dependencies?

  - by Stefan Lasiewski

  I'm trying to build a port which depends on apache-ant. I thought I could run make build-depends-list to see all dependencies required by this port: # make build-depends-list /usr/ports/devel/apache-ant /usr/ports/java/jdk16 /usr/ports/math/gmp But after installing everything, the port had a dependency list which was a mile long: apache-ant-1.8.1 desktop-file-utils-0.15_2 gamin-0.1.10_4 gettext-0.18.1.1 gio-fam-backend-2.26.1 glib-2.26.1_1 gmp-5.0.1 inputproto-2.0 javavmwrapper-2.3.5 kbproto-1.0.4 libX11-1.3.3_1,1 libXau-1.0.5 libXdmcp-1.0.3 libXext-1.1.1,1 libXi-1.3,1 libXtst-1.1.0 libiconv-1.13.1_1 libpthread-stubs-0.3_3 libxcb-1.7 pcre-8.12 perl-5.10.1_3 pkg-config-0.25_1 python26-2.6.6 recordproto-1.14 unzip-6.0 xextproto-7.1.1 xproto How can I see all dependencies, and all subdependencies for a port?

  Read the article

• Rails app deployment challenge, not finding database table in production.log

  - by Stefan M

  I'm trying to setup PasswordPusher as my first ruby app ever. Building and running the webrick server as instructed in README works fine. It was only when I tried to add Apache ProxyPass and ProxyPassReverse that the page load slowed down to several minutes. So I gave mod_passenger a whirl but now it's unable to find the password table. Here's what I get in log/production.log. Started GET "/" for 10.10.2.13 at Sun Jun 10 08:07:19 +0200 2012 Processing by PasswordsController#new as HTML Completed 500 Internal Server Error in 1ms ActiveRecord::StatementInvalid (Could not find table 'passwords'): app/controllers/passwords_controller.rb:77:in `new' app/controllers/passwords_controller.rb:77:in `new' While in log/private.log I get a lot more output so here's just a snippet but it looks to me like it's working with the database. Edit: This was actually old log output, maybe from db:create. Migrating to AddUserToPassword (20120220172426) (0.3ms) ALTER TABLE "passwords" ADD "user_id" integer (0.0ms) PRAGMA index_list("passwords") (0.2ms) CREATE INDEX "index_passwords_on_user_id" ON "passwords" ("user_id") (0.7ms) INSERT INTO "schema_migrations" ("version") VALUES ('20120220172426') (0.1ms) select sqlite_version(*) (0.1ms) SELECT "schema_migrations"."version" FROM "schema_migrations" (0.0ms) PRAGMA index_list("passwords") (0.0ms) PRAGMA index_info('index_passwords_on_user_id') (4.6ms) PRAGMA index_list("rails_admin_histories") (0.0ms) PRAGMA index_info('index_rails_admin_histories') (0.0ms) PRAGMA index_list("users") (4.8ms) PRAGMA index_info('index_users_on_unlock_token') (0.0ms) PRAGMA index_info('index_users_on_reset_password_token') (0.0ms) PRAGMA index_info('index_users_on_email') (0.0ms) PRAGMA index_list("views") In my vhost I have it set to use RailsEnv private. <VirtualHost *:80> # ProxyPreserveHost on # # ProxyPass / http://10.220.100.209:180/ # ProxyPassReverse / http://10.220.100.209:180/ DocumentRoot /var/www/pwpusher/public <Directory /var/www/pwpusher/public> allow from all Options -MultiViews </Directory> RailsEnv private ServerName pwpush.intranet ErrorLog /var/log/apache2/error.log LogLevel debug CustomLog /var/log/apache2/access.log combined </VirtualHost> My passenger.conf in mods-enabled is default for Debian. <IfModule mod_passenger.c> PassengerRoot /usr PassengerRuby /usr/bin/ruby </IfModule> In the apache error.log I get something more cryptic to me. [Sun Jun 10 06:25:07 2012] [notice] Apache/2.2.16 (Debian) Phusion_Passenger/2.2.11 PHP/5.3.3-7+squeeze9 with Suhosin-Patch mod_ssl/2.2.16 OpenSSL/0.9.8o configured -- resuming normal operations /var/www/pwpusher/vendor/bundle/ruby/1.8/bundler/gems/modernizr-rails-09e9e6a92d67/lib/modernizr/rails/version.rb:3: warning: already initialized constant VERSION cache: [GET /] miss [Sun Jun 10 08:07:19 2012] [debug] mod_deflate.c(615): [client 10.10.2.13] Zlib: Compressed 728 to 423 : URL / /var/www/pwpusher/vendor/bundle/ruby/1.8/bundler/gems/modernizr-rails-09e9e6a92d67/lib/modernizr/rails/version.rb:3: warning: already initialized constant VERSION cache: [GET /] miss [Sun Jun 10 10:17:16 2012] [debug] mod_deflate.c(615): [client 10.10.2.13] Zlib: Compressed 728 to 423 : URL / Maybe that's routine stuff. I can see the rake command create files in the relative app root db/. I have private.sqlite3, production.sqlite3 among others. And here's my config/database.yml. base: &base adapter: sqlite3 timeout: 5000 development: database: db/development.sqlite3 <<: *base test: database: db/test.sqlite3 <<: *base private: database: db/private.sqlite3 <<: *base production: database: db/production.sqlite3 <<: *base I've tried setting absolute paths in it but that did not help.

  Read the article

• Use Apache authentication to Segregate access to Subversion subdirectories

  - by Stefan Lasiewski

  I've inherited a Subversion repository, running on FreeBSD and using Apache2.2 . Currently, we have one project, which looks like this. We use both local files and LDAP for authentication. <Location /> DAV svn SVNParentPath /var/svn AuthName "Staff only" AuthType Basic # Authentication through Local file (mod_authn_file), then LDAP (mod_authnz_ldap) AuthBasicProvider file ldap # Allow some automated programs to check content into the repo # mod_authn_file AuthUserFile /usr/local/etc/apache22/htpasswd Require user robotA robotB # Allow any staff to access the repo # mod_authnz_ldap Require ldap-group cn=staff,ou=PosixGroup,ou=foo,ou=Host,o=ldapsvc,dc=example,dc=com </Location> We would like to allow customers to access to certain subdirectories, without giving them global access to the entire repository. We would prefer to do this without migrating these sub-directories to their own repositories. Staff also need access to these subdirectories. Here's what I tried: <Location /www.customerA.com> DAV svn SVNParentPath /var/svn # mod_authn_file AuthType Basic AuthBasicProvider file AuthUserFile /usr/local/etc/apache22/htpasswd-customerA Require user customerA </Location> <Location /www.customerB.com> DAV svn SVNParentPath /var/svn # mod_authn_file AuthType Basic AuthBasicProvider file AuthUserFile /usr/local/etc/apache22/htpasswd-customerB Require user customerB </Location> I've tried the above. Access to '/' works for staff. However, access to /www.customerA.com and /www.customerB.com does not work. It looks like Apache is trying to authenticate the 'customerB' against LDAP, and doesn't try local password file. The error is: [Mon May 03 15:27:45 2010] [warn] [client 192.168.8.13] [1595] auth_ldap authenticate: user stefantest authentication failed; URI /www.customerB.com [User not found][No such object] [Mon May 03 15:27:45 2010] [error] [client 192.168.8.13] user stefantest not found: /www.customerB.com What am I missing?

  Read the article

• How to get files that are dragged on Aquamacs (or opened via Quicksilver) to open in the same frame

  - by Stefan

  In Aquamacs 2.0 preview 6, when opening new files externally (e.g., via Quicksilver or via dragging files on the Aquamacs icon) they always open in new frames (i.e., new windows). I would prefer new files to be opening in the same frame, just in a new buffer (possibly with tabs turned on). I already unchecked the option "Show Buffers in new Frames", but that only seems to affect the behavior of the built-in open command (Command-o). Are there any options for this or some other way to modify this behavior?

  Read the article

• Decyphering Seagate drive model numbers?

  - by Stefan Lasiewski

  I'm comparing Seagate's Enterprise and Desktop drives for a variety of old and new servers. These servers come from different generations, so options like size (73GB, 2TB) and interface (SATA vs SAS 3.0Gbps vs SAS 6Gbps vs SCSI Ultra320) are widely variable. I'm trying to compare the sizes, speeds and interfaces, but I'm getting thrown off by different models. Also, their website is not the best. Does anyone know of a documented explanation of the Seagate model numbers? And is there a single spreadsheet which compares the features for all drives (or all 'Enterprise' drives?). Seagate drives have model numbers like this: Model ST3600057SS 6-Gb/s SAS 600 GB None at Cheetah® 15K Hard Drives Model ST373455LW Ultra320 SCSI 73.4 GB 68-Pin LW at Cheetah® 15K Hard Drives Model ST32000644NS SATA 3Gb/s 2 TB None at Constellation™ ES Hard Drives Model ST973452SS 6-Gb/s SAS 73 GB None Savvio® 15K Hard Drives Model ST9200011FS SATA 3Gb/s 200 GB Pulsar™ Solid State Drives I understand the model numbers read something like this: ST - SOMETHING1 - SIZE - SOMETHING2 - INTERFACE Where the fields mean something like this: ST : For 'Seagate'? 'Seagate Technoligies'? SOMETHING1 - This field has number, but I'm not sure what that represents. SIZE - Size in Gigabytes. This is a number like '73' or '300' or '2000' SOMETHING2 - This field also has a number, but I'm not sure what it means. INTERFACE - This field seems to indicate the Interface. 'SS' means SAS, 'FC' means Fibre Channel, but I don't see how to distinguish between 6Gbps SAS and 3Gbps SAS, or different SATA or FC speeds. I don't see a field which indicates the RPM (15K , 10K, 7.2K) etc. Is this part of the model number?

  Read the article

• SSH use only my password, Ignore my ssh key, don't prompt me for a passphrase

  - by Stefan Lasiewski

  This is a question regarding the OpenSSH client on Linux, MacOSX and FreeBSD. Normally, I log into systems using my SSH key. Occasionally, I want my SSH client to ignore my SSH key and use a password instead. If I 'ssh hostname', my client prompts me for the Passphrase to my SSH key which is an annoyance. Instead, I want the client to simply ignore my SSH key, so that the server will ask me for my password instead. I tried the following, but I am still prompted for the passphrase to my SSH key. After this, I am prompted for my password. ssh -o PreferredAuthentications=password host.example.org I want to do this on the client side, without any modification of the remote host.

  Read the article

• Kickstart: Serve dynamic kickstart images via a CGI or PHP script?

  - by Stefan Lasiewski

  I'd like to kickstart a couple dozen RHEL6/SL6 servers. However, some of these servers are different and I don't want to create a new ks.cfg file for each class of server. Are there any products which can generate a Kickstart file dynamically on the fly, from a template? For example, if I append a line like this to the KERNEL: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi Then the script ks.cgi can determine what host this is (Via the MAC address), and print out Kickstart options which are appropriate for that host. I could optionally override some options by passing parameters to the script, like this: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi?NODETYPE=production&IP=192.168.2.80 After we kickstart the server, we activate Cfengine/Puppet on this system and manage the system using our favorite Configuration Management product. We're experimenting with xCAT but it is proving too cumbersome. I've looked into Cobbler, but I'm not sure it does this. Update: A roll-your-own solution is discussed in the O'Reilly book: Managing RPM-Based Systems with Kickstart and Yum, Chapter 3. Customizing Your Kickstart Install Dynamic ks.cfg, which echos some of the comments in this thread: To implement such a tool is beyond the scope of this Short Cut, but I can walk through the high-level design. Any such solution would mix a data store (the things that change) with a templating solution (the things that don’t change). The data store would hold the per-machine data, such as the IP address and hostname. You would also need a unique identifier, perhaps the hostname, such that you could pick up a given machine’s data. The data store could be a flat file, XML data, or a relational database such as PostgreSQL or MySQL. In turn, to invoke the system, you pass a machine’s unique identifier as a URL parameter. For example: boot: linux ks=http://your.kickstart.server/gen_config?host-server25 In this example, the CGI (or servlet, or whatever) generates a ks.cfg for the machine server25. But where, oh where, is the code for ks.cgi?

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >