Search Results

Search found 4731 results on 190 pages for 'stuck'.

Page 6/190 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

    - by Eli
    Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

    Read the article

  • Mysql queries stuck in "sending data" state

    - by MarkPW
    I'm running a Litespeed web server and a database server (2 x Clovertown 5335) with MySQL 5.1.52-log (running on Cent OS 4.5 and 4.6 32bit respectively). Last week, I upgraded from 5.0.51a-community-log and since then I've been having a problem whereby my database server's load starts increasing for no apparent reason. Running SHOW PROCESSLIST; I see all of my SQL_CACHE queries that use a wildcard in WHERE, backing up and getting stuck in "sending data" state. However, other queries that use SQL_CACHE but no wildcard do not get caught up in this. To get things going again, the first time it happens (after about 24 hours), I have to restart mysql. 4/5 times it will re-occur after about 20 minutes or so and this time and for subsequent occurrences it is not necessary to restart mysql. Simply stopping the web server for a few minutes will suffice while I allow the stuck queries to clear themselves up. I had no such problem with the the previous mysql install. What could be causing the issue and how do I resolve it? Thanks

    Read the article

  • mac gets stuck in a blue screen during boot

    - by user10826
    Hi, a macbook pro 2008 unibody, after restart gets stuck in a blue screen. I used the Leopard disk and I verified and repaired permissions, which seem to be a problem, because the assistant found some wrong files. After restart I got the same problem. After googling I reset PRAM and the other (I do not remember the name now). Same problem. I check that I can boot in safe mode, although it is a lot slower. So before anything I try to make a time machine backup, hoping that I can be done from safe mode. First question: If it works, is it possible to do a clean leopard install (I do not like Snow) and migrate all user accounts from the backup, although it was done in safe mode? Second question: I read about the feature "archive and install" from the leopard disc. Is it reliable? Because I am afraid of losing all data ... Third question: I think this boot stuck has to do with the load of some program or service. It would explain why the computer does boot on safe mode and not in the normal one. I would then like to check what the computer loads during boot, but in more detail that with the information provided from /system preferecens/account/start, because there I removed everything. Where can I find more advanced information? And, if I remove programs from the safe mode, will it be effective druing the normal boot? Thanks

    Read the article

  • Time Machine is getting stuck at "Preparing to Back Up" and my Trash isn't emptying

    - by zarose
    I have encountered two separate problems, but I am putting them in the same question in case they are related. First, my Trash would not empty. It seems to be getting stuck on certain files, because I will reset my Macbook and some of the files will be deleted, and then if I remove a file or two at random, more can be deleted. Some of these files had strange characters in their names. I tried changing the names to single characters, but this did not help. Next, I attempted to backup my Macbook using Time Machine. I plugged in the HDD I've been using for this, but every time I try to start the backup, Time Machine gets stuck at "Preparing to Back Up". I definitely need to know how to fix the Time Machine problem, but I am curious how to solve the trash problem as well, and whether or not these problems are related. EDIT: Console.app logged the following this morning before I left on a trip. I did not bring the HDD with me. 6/5/12 7:41:28.312 AM com.apple.backupd: Starting standard backup 6/5/12 7:41:46.877 AM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 7:41:58.368 AM com.apple.backupd: Backup failed with error: 19 6/5/12 7:59:08.999 AM com.apple.backupd: Starting standard backup 6/5/12 7:59:10.187 AM com.apple.backupd: Backing up to: /Volumes/Seagate 3TB Mac/Backups.backupdb 6/5/12 7:59:13.308 AM com.apple.backupd: Event store UUIDs don't match for volume: Macintosh HD 6/5/12 7:59:13.331 AM com.apple.backupd: Event store UUIDs don't match for volume: Blank 6/5/12 7:59:13.683 AM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|new event db| 6/5/12 8:23:31.807 AM com.apple.backupd: Backup canceled. 6/5/12 8:23:33.373 AM com.apple.backupd: Stopping backup to allow backup destination disk to be unmounted or ejected. 6/5/12 9:51:21.572 PM com.apple.backupd: Starting standard backup 6/5/12 9:51:22.515 PM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 9:51:32.741 PM com.apple.backupd: Backup failed with error: 19

    Read the article

  • Web browsing through SSH tunnel gets stuck/clogged

    - by endolith
    I use tools like Tunnelier to log into my home Tomato router through SSH, and then use it as a proxy for web browsing, tunnel for Remote Desktop/VNC, etc. Most days it works great, but some days every page I try to view gets stuck, like the tunnel is clogged. I load a web page and it seems to be loading, then stops, with the little loading icon spinning and nothing happening. I refresh the page, I reboot the router, I reboot the other computers on my home network and turn off any bandwidth-hogging services on them, I've turned on QoS on the router to prioritize SSH. I don't understand what's getting stuck. Rebooting or disconnecting/reconnecting the SSH tunnel improves responsiveness for a minute, but then it gets clogged again. It also seems to help if I don't do anything on the tunnel for a few minutes, then it will be responsive for a bit and then get clogged again. Trying to open a terminal console from Tunnelier is also unresponsive, so it's not just a web browsing problem. Likewise, connecting to http://192.168.1.1 in the browser (to the router's web config through its own tunnel) is also slow/laggy/halting. The realtime bandwidth reported by the router is nowhere near my DSL connection's limits, though it does show big spikes during the laggy times, and the connection is responsive when it shows low bandwidths. How do I troubleshoot something like this?

    Read the article

  • Ubuntu on VPS becomes unresponsive: BUG: soft lockup - CPU#0 stuck for 22s

    - by Bhante Nandiya
    We have a VPS running Ubuntu, on Xen. The problem is this, about once a day, for about 20-50 minutes, at a random time, the server becomes completely unresponsive to the outside world. After this period, it becomes responsive again, as if nothing had happened, it doesn't lose uptime, it doesn't restart. It just starts responding again as if it had been in suspended animation. These outages occur under conditions of non-exceptional memory and cpu, for example 70% mem, 5% cpu. I have stopped all non-essential services so the usage is very even. These outages don't particularly occur during times of increased memory/cpu (during daily tasks), they sometimes occur at times of very low cpu use (<2%), but in the past also occured during swapping. These blackouts have been occurring both under Ubuntu 12.04 LTS, and Ubuntu 14.04 LTS - no change at all (I upgraded Ubuntu specifically to see if it helped this problem). It is possible to log into our webhosts site, and use their administration console to see error messages from during this time. Presumably, these messages are from the Xen virtualization, the main message goes like this: BUG: soft lockp - CPU#0 stuck for 22s! [ksoftireqd/0:3] (repeats many times) SysRq : Emergency Sync (Sometimes this is the only message in the console) Others seen previously under different load situations include: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] (repeated many times) or: INFO: rcu_sched detected stall on CPU 0 (t=15000 jiffies) (repeated many times with t getting bigger) From googling around I've tried various kernel parameters such as nohz=off and acpi=off to no avail. All tech support has said is that other Ubuntu installations are not suffering the same problem. Anyone got any ideas or experience with this problem?

    Read the article

  • Cisco VoIP stuck as Unregistered?

    - by Shifty
    Question: Why is one VoIP stuck as Unregistered? Background: We have a Cisco UC540 Small Business switch/router/voip combo. This phone was working until I powered everything down to install a larger UPS unit. The phone originally had a status of "Deceased". I removed the registration and tried to add it again. Now it just sits as "Unregistered". I even tried giving it another extension. I am stuck using the Cisco Communication Assistant since this is small business hardware. There is very limited CLI access. Also, from what I heard, if you access the CLI with out cisco permission, you will void any warranty. The phone in question is a Cisco SPA501G. It is connected to a SG300-28P. There are 5 other phones on this switch working just fine. I have tried other ports with no luck. Both the link and PoE lights are lit up. Any ideas?

    Read the article

  • 3Ware 9650SE RAID-6, two degraded drives, one ECC, rebuild stuck

    - by cswingle
    This morning I came in the office to discover that two of the drives on a RAID-6, 3ware 9650SE controller were marked as degraded and it was rebuilding the array. After getting to about 4%, it got ECC errors on a third drive (this may have happened when I attempted to access the filesystem on this RAID and got I/O errors from the controller). Now I'm in this state: > /c2/u1 show Unit UnitType Status %RCmpl %V/I/M Port Stripe Size(GB) ------------------------------------------------------------------------ u1 RAID-6 REBUILDING 4%(A) - - 64K 7450.5 u1-0 DISK OK - - p5 - 931.312 u1-1 DISK OK - - p2 - 931.312 u1-2 DISK OK - - p1 - 931.312 u1-3 DISK OK - - p4 - 931.312 u1-4 DISK OK - - p11 - 931.312 u1-5 DISK DEGRADED - - p6 - 931.312 u1-6 DISK OK - - p7 - 931.312 u1-7 DISK DEGRADED - - p3 - 931.312 u1-8 DISK WARNING - - p9 - 931.312 u1-9 DISK OK - - p10 - 931.312 u1/v0 Volume - - - - - 7450.5 Examining the SMART data on the three drives in question, the two that are DEGRADED are in good shape (PASSED without any Current_Pending_Sector or Offline_Uncorrectable errors), but the drive listed as WARNING has 24 uncorrectable sectors. And, the "rebuild" has been stuck at 4% for ten hours now. So: How do I get it to start actually rebuilding? This particular controller doesn't appear to support /c2/u1 resume rebuild, and the only rebuild command that appears to be an option is one that wants to know what disk to add (/c2/u1 start rebuild disk=<p:-p...> [ignoreECC] according to the help). I have two hot spares in the server, and I'm happy to engage them, but I don't understand what it would do with that information in the current state it's in. Can I pull out the drive that is demonstrably failing (the WARNING drive), when I have two DEGRADED drives in a RAID-6? It seems to me that the best scenario would be for me to pull the WARNING drive and tell it to use one of my hot spares in the rebuild. But won't I kill the thing by pulling a "good" drive in a RAID-6 with two DEGRADED drives? Finally, I've seen reference in other posts to a bad bug in this controller that causes good drives to be marked as bad and that upgrading the firmware may help. Is flashing the firmware a risky operation given the situation? Is it likely to help or hurt wrt the rebuilding-but-stuck-at-4% RAID? Am I experiencing this bug in action? Advice outside the spiritual would be much appreciated. Thanks.

    Read the article

  • ESXi 5.1 ghettoVCB stuck at Clone: 10% done

    - by stormdrain
    Trying to run ghettoVCB for the first time here. I am using a NAS that is set up as a datastore on the host. I did a dry run and it completed without error. The VM is ~500GB and there is only one on the host that I'm trying to backup. I proceeded to start the actual backup: ./ghettoVCB.sh -m vmname -g ghettoVCB.conf It goes though the config and looks like it's taking off: 2013-10-24 11:43:19 -- info: CONFIG - USING GLOBAL GHETTOVCB CONFIGURATION FILE = ghettoVCB.conf 2013-10-24 11:43:19 -- info: CONFIG - VERSION = 2013_01_11_0 2013-10-24 11:43:19 -- info: CONFIG - GHETTOVCB_PID = 17398616 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/nas2tb-001/esxi4 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2013-10-24_11-43-18 2013-10-24 11:43:19 -- info: CONFIG - DISK_BACKUP_FORMAT = thin 2013-10-24 11:43:19 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2013-10-24 11:43:19 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2013-10-24 11:43:19 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4 2013-10-24 11:43:19 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2013-10-24 11:43:19 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2013-10-24 11:43:19 -- info: CONFIG - LOG_LEVEL = info 2013-10-24 11:43:19 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2013-10-24_11-43-18-17398616.log 2013-10-24 11:43:19 -- info: CONFIG - ENABLE_COMPRESSION = 0 2013-10-24 11:43:19 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2013-10-24 11:43:19 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2013-10-24 11:43:19 -- info: CONFIG - ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP = 0 2013-10-24 11:43:19 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2013-10-24 11:43:19 -- info: CONFIG - VM_SHUTDOWN_ORDER = 2013-10-24 11:43:19 -- info: CONFIG - VM_STARTUP_ORDER = 2013-10-24 11:43:19 -- info: CONFIG - EMAIL_LOG = 0 2013-10-24 11:43:19 -- info: 2013-10-24 11:43:22 -- info: Initiate backup for vmname 2013-10-24 11:43:22 -- info: Creating Snapshot "ghettoVCB-snapshot-2013-10-24" for serv2 Destination disk format: VMFS thin-provisioned Cloning disk '/vmfs/volumes/esxi4-storage/vmname/vmname_1.vmdk'... Clone: 10% done. and it's been that way for over an hour now. Stuck at Clone: 10% done.. Thing is: I can see the vmdk on the NAS. And it looks like almost the whole thing is there. On the NAS it's showing ~430GB but on vSphere Client Summary is shows as 507GB. I don't see the vmdk on the NAS growing any more. The logfile mimics some of the above and is sitting at "Creating Snapshot..." and nothing else is coming in. Is the vmdk on the NAS showing all those GB because of the provisioning or something? i.e. is the size of the file not necessarily indicative of the amount of actual data that has been copied? Is there are reason it might be "Stuck" at 10%? i.e. could it really be taking this long? Any other tips? Thanks. Edit: as soon as I hit the Submit button, I glance over to see that it has incremented to 11% done. Good to know it'll be complete sometime around when the sun explodes.

    Read the article

  • Windows 7 + Deep Freeze - I'm stuck in an endless reboot loop

    - by myermian
    I have the following setup: Windows 7 Ultimate Deep Freeze I "thawed" my machine last night and performed a Windows Update. The update is having issues (it gets stuck at 32%, fails, and restarts my machine). When it reboots it attempts it again, and again, and again, etc. (Endless loop). I looked online and found some solutions, but none of them seem to be working: When I run Safe Mode, Safe Mode w/ Network, or Safe Mode w/ Command Prompt it attempts to revert the Windows Update changes. However, the problem is with Deep Freeze on (and now in "Frozen" mode) the reverted changes don't stay, and I'm back into the loop of death. Oh, and side note: "Safe Mode w/ Command Prompt" does not actually take me to a command prompt window? Perhaps because it is attempting to complete the Windows Update changes first? I have tried to select the option to NOT restart when an windows error occurs, but it still does. I tried the remainder of all the other options in the F8 screen. The only other option left is to find my Windows 7 Media Disc (I can't find it right now) and use it to repair windows (because for some reason the repair option does not show up in the F8 screen). Is there a way to disable Deep Freeze from loading? When I selected "Safe Mode w/ Command Prompt" I noticed that it loads the DpFrz.sys file. I know that when I'm in the Windows Boot Manager if I press F10 instead of F8 (while highlighting Windows 7) it takes me to an "Edit Boot Options" screen: Edit Windows boot options for: Windows 7 Path: \Windows\system32\winload.exe Partition: 2 Hard Disk: 8e90e329 [ /NOEXECUTE=OPTIN (I CAN EDIT THIS LINE) ] Update: I found my Windows 7 Media Disk and it did not help out. The laptop had the "System Restore" as a partition on the HDD. I later received (in the mail) a Windows 7 Upgrade Disc from Sony to upgrade my system from Windows Vista to Windows 7 Ultimate. I placed the disc into the DVD drive and it does not come up as a "bootable" disc. I'm going to try to find an alternative disc to see if I can get into Command Prompt. Update 2: I got a Windows Repair disc and got into a command prompt window. I got into the registry and disabled Deep Freeze. Also: I renamed the Pending.xml file to Pending.old I cleared out the Windows Temp directory I still am stuck in the loop (though, it isn't an issue with DeepFreeze anymore because I can make changes to the hard drive and they persist). Not sure what to do at this point? Update 3: I ran the repair option and it couldn't repair, but it did point me to something. It says the error was due to a driver that was failing. I have a feeling it is my UPEK Fingerprint scanner.

    Read the article

  • Messages stuck in SMTP queue - Exchange 2003

    - by Diav
    I need your help people ;-) I have a problem with messages coming into our Exchange Server and ones going out through it. Basically, the messages are stuck in the SMTP queue. A message will come into the server, I can see it listed under "Exchange System Manager", but if you list the properties of the message queue it says something like 00:10 SMTP Message queued for local delivery 00:10 SMTP Message delivered locally to [email protected] 00:10 SMTP Message scheduled to retry local delivery 00:11 SMTP Message delivered locally to [email protected] 00:11 SMTP Message scheduled to retry local delivery etc etc For outgoing message list looks like this: 10:55 SMTP: Message Submitted to Advanced Queuing 10:55 SMTP: Started Message Submission to Advanced Queue 10:55 SMTP: Message Submitted to Categorizer 10:55 SMTP: Message Categorized and Queued for Routing 10:55 SMTP: Message Routed nad Queued for Remote Delivery And the end - since then status didn't change, message is in queue, I am forcing connection from time to time but without an effect. I checked connection with smarthost (used telnet for that) and everything seems to work correctly, so the problem is probably on exchange side. I am using Exchange Server 2003 running on Small Business Server 2003. I don't have any antivirus installed on server. Remaining free space on each partition is over 3Gb, on partition with data bases - it is over 12Gb. All was working good and without problems since 2005, problems started in half of this june - messages started going out and being stuck almost randomly (I don't see a pattern yet, some are going out, some are not, some are going after several hours). I don't know what to do, what to check more, so please, any ideas? Best regards, D. edit Priv1.edb has 14,5GB and priv1.stm 2,6GB - together those files have more than 16GB - can it be the reason? If yes, then what? Indeed, I haven't thought that it can have something in common with my problem, but several users reported recent problems with Outlook Web Access - they can log in, they see the list of their mails, but they can't see the content of their emails. Although when they are connecting with Outlook 2003/2007 - there is no such problem, only with OWA there is. edit2 So,.. It works now, and I have to admit that I am not really sure what the problem was (hope it won't come back). What have I done: Cleaned up some mailboxes to reduce size of them Dismounted Information Store Defragmentated data base files ( I used eseutil: c:\program files\exchsrvr\bin eseutil /d g:\data base\Exchsrvr\MDBDATA\priv1.edb ) Mounted Information Store back ..and before I managed to do anything else - my queue started moving, elements which were kept there already for days - started moving and after few minutes everything was sent, both, outside and locally. But: priv1.edb is still big (13 884 203 008), priv1.stm as well (2 447 384 576), so this is probably not the issue of size of the file. And if not this, so what was that? And if that was issue of size of the file, then soon it will repeat - is there something I can do to avoid it ?

    Read the article

  • Acer AM1100 stuck on Verify DMI Pool Data

    - by r0ca
    I have an Acer AM1100 and I just installed Windows 7 Ultimate. Windows has properly installed but right now, when I boot up the system, I get stuck on "Verify DMI Pool Data". I also tried to reinstalled the whole thing but this happens again... Any takers? It's an Acer AM1100 Athlon x2 2go Ram Sata HDD 320go

    Read the article

  • Control Less Window gets stuck in Win7

    - by dkjain
    Hi there is a dialer software (by ISP) that connects to my ISP's wi-fi network. Though it connects to the wi-fi network however a control-less windows gets stuck in the middle of the my win7 desktop screen and does not goes off. I cannot close it or minimize it as there are no controls on it. I want to know how to minimize or close the windows without killing the app via Task Manager. Regards, DK Jain.

    Read the article

  • Windows 7 DNS stuck at manual

    - by Populus
    I am using the google dns servers most of the time, but for one particular wifi connection it blocks that ip so I have to revert back to automatically choosing DNS... The problem now is everytime I connect to this network, I have to change it back to automatic DNS manually (ironically), it's stuck on using the google DNS by default... It's a trivial problem, but would be fab if someone can help me out here...

    Read the article

  • Windows XP taskbar is stuck on "always on top of other windows"

    - by Rich
    My Windows XP taskbar is stuck on "always on top of other windows". It's always visible, even when a full-screen app is running. I've gone into the properties of the taskbar and un-checked the box for "Keep the taskbard on top of other windows" but it makes no difference. checked or un-checked, it's always on top of other windows. Any ideas?

    Read the article

  • rundll32 gets stuck when running games on windows 7 [closed]

    - by Midhat
    When I run a game on my windows 7 laptop, Rundll32 completely uses up one of my cores and the game wont start. By searching the web I have been able to fix it by 1 - Disabling game info collection/updation from the games explorer. It solved the problem for some games but not all 2 - Killing the game exe once rundll32 gets stuck and restarting the game This has solved the problem for now, but is there a proper and permanent solution to this?

    Read the article

  • Photoshop CS4 panels get "stuck" after being moved

    - by jalperin
    Using Photoshop CS4 on Windows 7. If I try to move or reorganize any of the panels (e.g. Info, Swatches, Layers, etc.) by dragging a panel into a different location on the screen, the moved panel becomes "stuck" and cannot be moved again (although it can be minimized to an icon). Any suggestions for resolving?

    Read the article

  • Console session stuck ESXi unsuported mode

    - by Datapimp23
    Hi guys, I was editing the /etc/inetd.conf file in VI to enable SSH and when I believed to have saved it. I entered cat and pressed enter accidently. Now I seem to be stuck in a black screen where I can enter characters but can't exit from it. How would I go on my way to get back to the normal console without rebooting the ESXi. Thanks

    Read the article

  • Outlook 2003 items stuck in outbox after sent (POP3)

    - by Saif Khan
    Hi, I have a PC, when the user sends an item it's stuck in the outbox after sending. The strange thing is that the mails are being sent to the recepient. It's just that Outlook doesn't move it from Outbox to Sent Items...I checked all the settings and all is well. This is a POP3 account. What else can I check?

    Read the article

  • DNS Update 'stuck'

    - by Postus
    I have a dedicated server with Debian and ISPconfig on it And a domain example.it I did a error while setting the dns for the first time I've tried to set it to ns1.example.it IP.IP.IP.IP myDedicnumber.kimsufi.com IP.IP.IP.IP But it got stuck it shows "Current Status: on hold" its been 7days already. I've tried contacting ovh but they just told me to set my dns to something diffrent but I can't as this operation is blocking any changes to the DNS records. Is there anything that I could do accept bug OVH?

    Read the article

  • Get program that is stuck under task bar in Windows 7

    - by user1413
    I have a program that is stuck under the task bar in Windows 7. I cannot click on it because (I think) the click is interpreted as being on the task bar and not on the program. How do I recover it? The program does not show up when I alt-tab through all of the programs. It also does not show up in Applications in the Task Manager.

    Read the article

  • Dell PowerEdge R720xd stuck in BIOS

    - by G_P
    I have a Dell PowerEdge R720xd that gets stuck in the BIOS when booting. It successfully gets past the "configuring memory" and "configuring iDRAC" screens, but once it shows the "CPLD version : 103" with the various management engine versions/patches, it just hangs. No errors messages are displayed. This started happening when we tried adding additional RAM to the machine. Since then, we tried re-seating the new memory which resulted in the same issue. Then, we took out all the new memory, and the problem persists. We have also tried pressing F2 to get into System Setup, but it just indicates "Entering System Setup" and hangs at the same point. Has anybody seen this issue before or have any ideas on what to try next? UPDATE After troubleshooting and trying to isolate the issue (stripping things down to a single CPU and single DIMM, same problem, swapping to the other CPU and a different DIMM, same problem), Dell support will be coming out to swap the system board.

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >