Search Results

Search found 10608 results on 425 pages for 'video recording'.

Page 6/425 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Video stutter when using external drive

    - by psion
    When using boxee to play video files off of an external western digital 1TB drive formatted NTFS, I notice a slight stutter in the video every 5-10 seconds. When using mplayer, it doesn't stutter as often, but it still stutters occasionally. If I play the video off of the local sata drive, it plays fine even in boxee. I use this computer as my HTPC and I just switched from windows to linux on it. In windows, I never had any sort of stutter playing movies from the drive. I am using the latest intel graphics drivers (for the intel GMA 950) root@eee-htpc:/home/htpc# grep wd /etc/mtab /dev/sdb1 /mnt/wd2 fuseblk rw,nosuid,nodev,allow_other,blksize=512 0 0 I notice that despite trying to use ntfs or ntfs-3g, ubuntu uses ntfs-fuse which I've heard is slower. /dev/sdb1: Timing buffered disk reads: 80 MB in 3.07 seconds = 26.08 MB/sec root@eee-htpc:/mnt/wd2# dd if=/dev/zero of=./120mb bs=1024 count=120000 root@eee-htpc:/mnt/wd2# time mv ./120mb /home/htpc real 0m2.095s user 0m0.016s sys 0m0.736s Even though fuse has a reputation for being slow, it should easily be fast enough for playing standard definition video files. So why the video stutter? edit: The issue seems to be overhead cpu usage from either playing off of a usb device or ntfs/fuse. Watching CPU usage with top, local files use 10-40% CPU. Watching the same video on the external formatted ntfs, it spikes to 170% (over 100% because of hyperthreading). To me it seems like it must be overhead from the fuse driver, though I don't know if it has more or less overhead than ntfs-3g. It's a EEEBox B202 that has an atom 270, so not exactly the most powerful out there. edit2: I believe the solution would be to use non-fuse drivers or different fuse drivers. so far I have not been able to. edit3: I've probably edited this more times than I should, but as an update I have upgraded ntfs drivers to ntfs-3g 2010.8.8 external FUSE 28 - Third Generation NTFS Driver using the following PPA - ppa:x3lectric/team-iquik-releases. When first opening a video file in boxee that's on ntfs there's still the same amount of lag. After a few minutes of video, the lag seems to go away and the cpu usage comes down to 10-40%. Every so often though, it begins to stutter again. Also, if I skip ahead/back in the file, it begins to stutter a lot.

    Read the article

  • PS2 Eyetoy Recording Quality

    - by Fire
    I have Ubuntu 12.04 LTS and a PS2 eyetoy "Namtai". Don't worry - this is not the sterotypical " how do I get my eyetoy working" question. My eyetoy works fine on Cheese, gucview and various other media software like VLC. However, It seems like I am capped by 25fps. If I recall, the eyetoy is much better than this (~60fps) but cannot find any way to fix this. The best program that I have have found is VLC because its advanced options allow you to change many settings but the framerate setting appears to have no effect. What software or settings can I use to take full advantage of my eyetoy? To give you the full information I wish to attach multiple eyetoys to the system and record from all of them. (Security software like motion and zoneminder, I couldn't get installed correctly on my system- so I haven't tried those yet). edit - I tried the same camera on a Windows system and the frame rate is much better in VLC compared to the Ubuntu system. Mind you with default settings in Windows VLC, the resolution isn't great. However, in Skype for example the resolution is amazing and the framerate is good. It seems there must be some settings I am missing somewhere because it doesn't appear to be a hardware problem...

    Read the article

  • Embedding a Media manager video in the article in Joomla1.5

    - by Aruna
    Hi, I am working on Joomla currently for the past one month. I am trying to embed a video stream in my article page like inside the content i am trying to have video stream like youtube video. I have uploaded a video in my media manager. And i dono how to stream that video in my page. Please help me in doing so.. EDIT: FOr an youtube video i have used like <object width='425' height='344'> <param name='movie' value='http://www.youtube.com/v/hQVTIJBZook&hl=en&fs=1'> <param name='type' value='application/x-shockwave-flash'> <param name='allowfullscreen' value='true'> <param name='allowscriptaccess' value='always'> <param name="wmode" value="opaque" /> <embed width='425' height='344' src='http://www.youtube.com/v/hQVTIJBZook&hl=en&fs=1' type='application/x-shockwave-flash' allowfullscreen='true' allowscriptaccess='always' wmode="opaque"> </embed> </object> But i am having the video in my http://www.abc.com/images/abc.flv i am not able to know of how to use this video ?? where http://www.abc.com is my website running in Joomla1.5 . Please help me..

    Read the article

  • mailto: anchor links unloading html5 video in Chrome

    - by Robin Pyon
    I have a very simple page with a <video> tag and an email anchor link: http://jsfiddle.net/6GquX/3/ Clicking the email link in Chrome (OS X 10.8 + Win7, 23.0.1271.97) invokes the beforeunloadchange event and causes the video to unload, which isn't the desired outcome. Curiously enough, if I let the video buffer a bit and then click the email link, the video keeps playing and doesn't unload. To my knowledge this only occurs in Chrome and I'm truly at a loss. Visiting any HTML5 video player site (videojs, flowplayer etc), starting a HTML5 video and then immediately simulating an email click with document.location.href = "mailto:[email protected]" in the dev console yields the same error. However, I'm inclined to think it's the way in which the video has been encoded as I'm unable to recreate the above with a video downloaded from YouTube's HTML5 player: http://jsfiddle.net/6GquX/4/ (source) 1. Is it possible that YouTube are encoding their videos in a particular way to combat this? 2. Are there any strategies / hacks I can employ to get around this?

    Read the article

  • Playing an InputStream video in Blackberry JDE.

    - by Jenny
    I think I'm using InputStream incorrectly with a Blackberry 9000 simulator: I found some sample code, http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/1089414/How%5FTo%5F-%5FPlay%5Fvideo%5Fwithin%5Fa%5FBlackBerry%5Fsmartphone%5Fapplication.html?nodeid=1383173&vernum=0 that lets you play video from within a Blackberry App. The code claims it can handle HTTP, but it's taken some fandangling to get it to actually approach doing so: http://pastie.org/609491 Specifically, I'm doing: StreamConnection s = null; s = (StreamConnection)Connector.open("http://10.252.9.15/eggs.3gp"); HttpConnection c = (HttpConnection)s; InputStream i = c.openInputStream(); System.out.println("~~~~~I have a connection?~~~~~~" + c); System.out.println("~~~~~I have a URL?~~~~" + c.getURL()); System.out.println("~~~~~I have a type?~~~~" + c.getType()); System.out.println("~~~~~I have a status?~~~~~~" + c.getResponseCode()); System.out.println("~~~~~I have a stream?~~~~~~" + i); player = Manager.createPlayer(i, c.getType()); I've found that this is the only way I can get an InputStream from an HTTPConnection without causing a: "JUM Error 104: Uncaught NullPointer Exception". (That is, the casting as a StreamConnection, and THEN as an HttpConnection stops it from crashing). However, I'm still not streaming video. Before, a stream wasn't able to be created (it would crash with the null pointer exception). Now, a stream is being made, the debugger claims it's begining to stream video from it...and nothing happens. No video plays. The app doesn't freeze, or crash or anything. I can 'pause' and 'play' freely, and get appropriate debug messages for both. But no video shows up. If I'm playing a video stored locally on the blackberry, everything is fine (it actually plays the video), so I know the Player itself is working fine, I"m just wondering if maybe I have something wrong with my stream? The API says the player can take in an InputStream. Is there a specific kind it needs? How can I query my inputstream to know if it's valid? It existing is further than I've gotten before. -Jenny Edit: I'm on a Blackberry Bold simulator (9000). I've heard that some versions of phones do NOT stream video via HTTP, however, the Bold does. I have yet to see examples of this though. When I go to the internet and point at a blackberry playable video, it attempts to stream, and then asks me to physically download the file (and then plays fine once I download). Edit: Also, I have a physical blackberry Bold, as well, but it can't stream either (I've gone to m.youtube.com, only to get a server/content not found error). Is there something special I need to do to stream RTSP content?

    Read the article

  • google-chrome video application association

    - by Ben Lee
    Is there any way to tell google-chrome to launch video files of particular types in an external application (or even just to bring up the download box as if the type was un-handled), instead of showing the video inside the browser? Searching online, it seems that chrome is supposed to use xdg-mime for file associations, but apparently is ignoring this for video. For example, when I do: xdg-mime query default video/mpeg It returns dragonplayer.desktop. But when I click on a mpeg video link, chrome displays it internally instead of launching Dragon Player (if I double click on a mpeg file in my file manager, on the other hand, it does open Dragon Player). So is there a way to tell chrome to respect this setting, or another way to coax chrome into opening the file externally? If it matters, I'm running the latest version of google-chrome stable (not chromium) at the time of writing, v. 18.0.1025.151, on kubuntu 11.10.

    Read the article

  • Need to convert a video file from mp4 to xvid

    - by Shawn
    I checked out the questions with similar titles and didn't find anything that I thought would help. I am attempting to convert a video into an avi, preferably xvid. The video file's Video and Audio Properties are as follows: Video Dimensions: 1280x544 Codec H.264/AVC Framerate: 24 frames per second Bitrate: 774 kpbs Audio Codec: MPEG-4 AAC audio Channels: Stereo Sample Rate: 48000 Hz Bitrate: 32 kpbs I have tried numerous times to convert this into an Xvid codec AVI but I have had no luck successfully getting the audio to sync properly. I am using Openshot to attempt conversion, using the libxvid codec and AVI format, but I am unsure of the proper audio settings I should use. What settings should I use to convert this video with Openshot? If it is not possible with Openshot, or if there is a better application to use, I would be grateful to know that as well.

    Read the article

  • Change video being played in HTML5 video

    - by Krt_Malta
    Hi! I'm using the tags in HTML5 to play a video on a web browser... (and I'm very impressed with this new feature) Is there the functionality to change the video being played through Javascript? Say when I select another video from a list, a Javascript function would be called which would contain something on the lines of MyVideo.VideoLocation = //location of new video to be played. Is this possible please? Thanks and regards, Krt_Malta

    Read the article

  • Free desktop recording / screencasting on windows

    - by Mercer Traieste
    I'm a newbie in desktop recording and screencasting. I didn't find a suitable free application to do all the things I want it to do, but I did enjoy using jing. I would expect such an application to have these features: choose the whole desktop, a region, a window to record zoom in an area, and camera move save the recorded movie to a compressed format have basic editing tools have the mouse highlighting feature (either a sonar blip or something similar) highlight window/field on the screen, any trick will do display pressed keys/key combinations (like iphone does) So the question is: Which free desktop recording/screencasting software would you recommend on windows? It doesn't have to have all those features, just tell me your favorable experiences. Please suggest tools that would do mouse/keys/areas highlight tricks. I'm open to commercial software too, but I would prefer a free one. Thank you!

    Read the article

  • Software to convert .m2ts to .mts (HD video files)

    - by Kelsey
    I am looking to convert some of .m2ts video files (about 80GB worth) to .mts format which the my current camera is produces natively. Is there any free software that anyone has used that can do this? I know the .m2ts is the container so I am not sure just doing a rename of the extension to .mts is valid. It works but I am not sure it is actually producing an mts stream.

    Read the article

  • development and music recording machine suggestions?

    - by dean nolan
    I wasn't sure if this belongs on SuperUser so flag if so. I am looking to build, primarily, a windows development machine that is also good for recording using Cubase. I know I should use seperate machines but I'm on a budget this time of year. I also havn't kept up with hardware for quite a few years. Basically I know I want quad core, multiple monitor support (no gaming requirements). A lot of RAM, very quiet case and super fast HDD (SSD OR 10,000RPM)for compiling and latency. I will store libraries and other data on a USB drive. Sound card is not needed as I will be using an audio interface, all other music recording equipment is taken care of also. I could do with some decent monitor recomendations also. All suggestions welcome, thanks.

    Read the article

  • What is the best software for desktop recording?

    - by Ivo Flipse
    I know this question is partially a stub from: http://superuser.com/questions/201/free-desktop-recording-screencasting-on-windows However I would have to use this at work, so it doesn't have to be free, just work very well. Lended from the free post: I would expect such an application to have these features: choose the whole desktop, a region, a window to record zoom in an area, and camera move save the recorded movie to a compressed format have basic editing tools have the mouse highlighting feature highlight window/field on the screen, any trick will do display pressed keys/key combinations (like iphone does) So the question is: Which desktop recording/screencasting software would you recommend?

    Read the article

  • Send HD video over SONET

    - by Fizzy
    In an effort to test our new OC 192 network, we would like to find a way to stream HD video over it for a demonstration. We are looking for a device or combination of devices that connects to HDMI on one side and has a XFP client interface on the other. I understand this is a ridiculous request and we are planning on an "interesting" solution.

    Read the article

  • video uploading software

    - by Pennf0lio
    Are there software that lets you upload videos to video hosting sites (youtube,googlevideos, megavideo, etc)? with features like scheduling upload, queuing of videos to upload, multiple sites to upload. etc. Any software with similar capabilities would be a help. Thanks!

    Read the article

  • Video screen recording + add text (subtitle), export as .flv. What programs?

    - by RasmusWriedtLarsen
    I have to record a video to showcase a tool I've made. It's going to include my talking, but I also want some overlay text (subtitles) for people who doesn't have sound. I'm looking for a program that will let me add a text overlay (as subtitle) for my video, and if possible, export it as .flv . I've tried this so far: Used CamStudio for recording, using their lossless format. Converted the .avi file to a .flv using Any Video Converter (free version) I've been having some trouble with the output of CamStudio, some programs can't play the file right, it skips forward and backward. (VLC, Adobe Media Encoder CS4) So I'm looking for a program that accepts videos from CamStudio*, can add text to my video, and hopefully export as flv. *(If that's not possible I'm open for other recording programs). I'd like to ONLY use free programs, and I'm on Windows XP. Looking forward to your help :)

    Read the article

  • Concatenating ogg video files from the command line

    - by Noufal Ibrahim
    Okay. I've got a few ogg files I've created using a desktop recording tool. I've transcoded them using ffmpeg once (mainly to clip out the beginnings and the ends). Now, I have 3 such files which I want to concatenate into a single .ogv file. I tried using oggCat, it crashed with some kind of error (I tried concatenating a file to itself using oggCat and that failed too leading me to believe that my distro is shipping a broken version of the package). Simply cating the files works but I can't seek which is not cool. mencoder run like this mencoder -ovc lavc -oac lavc file1.ogv file2.ogv file3.ogv -o complete.ogv. It transcodes the files into an avi and clips off a little of the 3 videos. So, how do I do this? Update 1: My current workaround is to transcode the 3 files into .mpg using ffmpeg, then cating them together and then transcoding them back into ogv. Update 2: PiTiVi works for this kind of thing but I need something from the command line that I can automate and script.

    Read the article

  • Curiosity’s Descent to Mars in HD [Video]

    - by Jason Fitzpatrick
    Thanks to the Mars Descent Imager (MARDI) mounted on the fore-port side of Curiosity we’re treated to a high-resolution video of Curiosity’s descent to Mars. The video from MARDI, combined with the video editing of YouTube user DLFitch, yields the above video. He writes: This is a full-resolution version of the NASA Curiosity rover descent to Mars, taken by the MARDI descent imager. As of August 20, all but a dozen 1600×1200 frames have been uploaded from the rover, and those missing were interpolated using thumbnail data. The result was applied a heavy noise reduction, color balance, and sharpening for best visibility. The video plays at 15fps, or 3x realtime. The heat shield impacts in the lower left frame at 0:21, and is shown enlarged at the end of the video. Image source. Complete MSL Curiosity Descent – Full Quality Enhanced 1080p + Heat Shield impact [YouTube] HTG Explains: Is UPnP a Security Risk? How to Monitor and Control Your Children’s Computer Usage on Windows 8 What Happened to Solitaire and Minesweeper in Windows 8?

    Read the article

  • Video lags/freezes in SMPlayer and VLC

    - by RanRag
    When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

    Read the article

  • Flash video player VS HTML 5 Video.....

    - by metal-gear-solid
    I need to add a video player to play a video on a webpage. usually i use Flash player with the help of swfobject library. which works if flash player and javascript both are enabled. I'm currently using XHTML 1.0 strict doctype. My question is can i just change my doctype to HTML 5 doctype and add Video player using HTML 5 video. for browser which do not support HTML5 i can a a javascript. in this condition in supported browser Video will work without Flash player and javascript and in non-supported browser will work with js support. Is this possible? Is this a good idea?

    Read the article

  • HTML-5 : video tag. Video not playing

    - by Microkernel
    Hi guys, I was trying use/test video tag of HTML-5. Here is the code <!DOCTYPE HTML> <html> <body> <video src="./Pilot.avi" controls="controls"> your browser does not support the video tag </video> </body> </html> Pilot.avi is stored in the same same directory as this HTML page. The problem is, I am seeing the controls being displayed but can't play the video. I tried with, 1) Mozilla Firefox 3.6.13 2) Google Chrome 8.0.552.224 What could be the problem? Regards, Microkernel

    Read the article

  • Embedded Vimeo Video Callbacks

    - by Andrew
    This post is kind of a follow up to a post I made earlier in regards to HTML5 video callbacks. In that thread, I was given a great piece of code that would allow for the browser to be informed of when the video stops playing and then fire off an action (with jQuery). This is the code I'm currently using: $('video.normal').bind('ended', function(){ $(this).fadeOut().queue(function(){ $(this).siblings('.post-video').fadeIn(); $(this).dequeue(); }); }); Which basically fades the video out when it's completed and brings a poster frame of the video (or similar image) back into view. Well, the scope of the project has changed and now the client is asking for true full screen video and different size videos to be delivered based on user connection speed, something that's a little over my head and a lot over budget. So I've been researching and a Vimeo Plus player seems like a great alternative for visitors using a desktop browser (HD embeds, true full screen, and more). Thing is, I need that above code to continue working in some capacity or another, so does the embedded Vimeo player offer a similar callback that I can utilize? Or am I SOL here? Thanks in advance!

    Read the article

  • SQLAuthority News – A Quick Note on @Pluralsight Video – Call Me Maybe Developer Way

    - by pinaldave
    I write a lot about how important learning and training is.  Any of my readers will know that I think the key to success is staying current with your education and taking very opportunity to increase your “tool kit” of skills.  I hope that I have not made the impression that it is all in the employees hands to make sure they are happy and satisfied at their jobs. I also firmly believe that a good boss will make good employees.  A boss who is good at communicating,  and leading, who knows how to nip problem in the bud and allocate resources wisely will have a well-oiled machine.  This means happy employees and a great work environment. It is important to have a healthy work environment because you will not succeed without one.  Successful business will always have the type of environment that fosters creativity and has efficient employees.  A healthy environment doesn’t force employees to produce results, but allows them to progress and create the results themselves. The result of a healthy work environment is that employees will enjoy their work and then work harder.  This can bring the company more revenue, and hopefully the employees will see the result of their hard work in bonuses and raises.  However, money is important but it is certainly secondary – the important part is the dedication of the employees to their work and to their company.  This is the true key to success. Any employee who recognizes this description as their working environment should consider themselves fortunate.  They are allowed to grow and do better, and employees being treated fairly can be a rarity in this world.  One company that I believe adheres to this principle is Pluralsight – as evidenced by this fun video. I have blogged about it earlier. (check out my cameo at 0:37). It was great fun to work with the employees at Pluralsight while making this video.  They are a great bunch and clearly have a great work environment – we wouldn’t have had this much fun if not!  I have to tell you a little bit about making this video.  My wife shot it with her mobile phone, which was certainly a different but exciting experience!  It was hard to get the look of the video right, since I was trying to portray a body builder – this was a little outside of my own personal experience.  I have what I like to call a “healthy” body type, so trying to look extremely fit like some of the other “actors” in this video was a challenge – but I do hope that you all think I succeeded.  All in all, it was great fun to participate in this video and I hope to see my friends at Pluralsight again soon. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology, Video

    Read the article

  • Basic video editor for AVCHD Lite files?

    - by davr
    I have a camera (Panasonic Lumix GF-1) that outputs "AVCHD Lite" files, 720p h264 in a MTS container. I saw this question that said Movie Maker in Windows 7 supports AVCHD...but I just tried, and unfortunately it does not support AVCHD Lite. Are there any free or inexpensive non-linear video editors (NLE) that can natively handle AVCHD Lite files, without requiring some 3rd party driver? If not, are there any 3rd party drivers that are especially stable? (In my experience they usually have some problems...I got AVCHD Lite loading into VirtualDub using a 3rd party plugin, but it's very slow and sometimes crashes, and seeking takes ages.

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >