Search Results

Search found 2115 results on 85 pages for 'chance'.

Page 60/85 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• saving data from a failing drive

  - by intuited

  An external 3½" HDD seems to be in danger of failing — it's making ticking sounds when idle. I've acquired a replacement drive, and want to know the best strategy to get the data off of the dubious drive with the best chance of saving as much as possible. There are some directories that are more important than others. However, I'm guessing that picking and choosing directories is going to reduce my chances of saving the whole thing. I would also have to mount it, dump a file listing, and then unmount it in order to be able to effectively prioritize directories. Adding in the fact that it's time-consuming to do this, I'm leaning away from this approach. I've considered just using dd, but I'm not sure how it would handle read errors or other problems that might prevent only certain parts of the data from being rescued, or which could be overcome with some retries, but not so many that they endanger other parts of the drive from being saved. I guess ideally it would do a single pass to get as much as possible and then go back to retry anything that was missed due to errors. Is it possible that copying more slowly — e.g. pausing every x MB/GB — would be better than just running the operation full tilt, for example to avoid any overheating issues? For the "where is your backup" crowd: this actually is my backup drive, but it also contains some non-critical and bulky stuff, like music, that aren't backups, i.e. aren't backed up. The drive has not exhibited any clear signs of failure other than this somewhat ominous sound. I did have to fsck a few errors recently — orphaned inodes, incorrect free blocks/inodes counts, inode bitmap differences, zero dtime on deleted inodes; about 20 errors in all. The filesystem of the partition is ext3.

  Read the article

• Why do I get swap space related errors when I still have lots of free memory in Solaris 10?

  - by Tom Duckering

  I am seeing a few of my services suffering/crashing with errors along the lines of "Error allocating memory" or "Can't create new process" etc. I'm slightly confused by this since logs show that at the time the system has lots of free memory (around 26GB in one case) of memory available and is not particularly stressed in any other way. After noting a JVM crash with similar error with the added query of "Out of swap space?" it made me dig a little deeper. It turns out that someone has configured our zone with a 2GB swap file. Our zone doesn't have capped memory and currently has access to as much of the 128GB of the RAM as it need. Our SAs are planning to cap this at 32GB when they get the chance. My current thinking is that whilst there is memory aplenty for the OS to allocate, the swap space seems grossly undersized (based on other answers here). It seems as though Solaris is wanting to make sure there's enough swap space in case things have to swap out (i.e. it's reserving the swap space). Is this thinking right or is there some other reason that I get memory allocation errors with this large amount of memory free and seemingly undersized swap space?

  Read the article

• Can SQL Server (2008) transaction logs handle the database being dropped and re-created?

  - by Ben

  We're trying to restore a database (created programatically by running a hand-crafted SQL script we have). Our backup routine is to create a full backup of every database on the SQL Server 2008 instance on a Saturday then automatic transaction logs (I assume these are created automatically anyway - we appear to have lots of log files, possibly one per transaction after the full backup was taken?). On Tuesday this week the database in question was dropped and another one with the exact same name and schema was created. SQL Server has continued to create transaction log files but it hasn't had chance to create a new full backup (that won't happen until next Saturday). Now as it turns out we need to restore the database to how it was on Thursday. This is after the "drop and re-create". My question is, is this possible? If it isn't, what exactly does SQL Server think that it's writing to those transaction logs created since the drop and re-create? (I understood they were kind of files containing a binary delta, which makes me think maybe we can restore from them?) I'm no DBA but then neither is our IT department, so I'm doing the best I can to resolve this. Any advice much appreciated!

  Read the article

• Buying an old laser printer -- what will need to be replaced?

  - by marienbad

  Hi all -- as you can see I'm new. I do IT and wiring for a small local shop but I never deal with printers. I do a LOT of printing, and I'd like to stop spending as much money on it. On my local CL, there is an HP 8100DN (duplex network) printer for a very good price (and the toner is a quarter-cent per page). It has printed 200,000 pages and I don't yet know anything else about it. The model was released in 1999. So my questions: What are the parts that tend to need service on laser printers? On ebay, I see fusers, rollers, DC power boards, and motors. What would you expect to replace soon at 200,000 pages? Are there any good "tests" to find out if certain parts are near failure? Do you have anything to say about the HP 8100 specifically? The bottom line for me is that if there's any chance of repairs costing more than $100, it's not worth it for me.

  Read the article

• Is domain-transfer inherently safe for downtime when the name servers remain the same?

  - by jlmt

  I've been reading around this topic towards understanding whether there's some or no chance of downtime during an upcoming domain transfer for 15 live and very critical domains. In our case there are three companies involved: CompanyA is the original registrar and DNS host, CompanyB is the new DNS host, and CompanyC is the new registrar. I've already changed the nameservers for all domains to those of CompanyB. We suffered some downtime because CompanyA deleted their hosted DNS for our domains directly after the change, but the changes propagated and we're now able to configure our DNS with CompanyB. From what I understand (please correct where wrong!): There exists an SOA record that points oneofourdomains.com to ns.companyb.com. That record is maintained and authoritatively hosted by the ccTLD registry for the domain (eg. Verisign for .com). CompanyA currently has the ability to change the SOA record because they're the registrar. There exist NS records for oneofourdomains.com, which are also related to the link from domain name to nameserver, are similarly hosted by the ccTLD, and which CompanyA are also able to change while acting as registrar. Neither CompanyB nor CompanyC currently have any control over the SOA or NS records. CompanyA are unable to cause us (DNS) problems during the transfer by dropping service early, because they are not the authoritative source for the SOA and NS records. When we transfer the domains, it's administrative control of the SOA and NS records that will be transferred to CompanyC. As long as we advise CompanyC that the SOA and NS records must not change (as regards pointing to CompanyB's nameservers), there's no need for any kind of DNS change, and therefore no possibility of downtime. Is my understanding of this correct? My fear is that CompanyA will somehow cut us off again, and their support dept hasn't given me much confidence in their understanding of the topic.

  Read the article

• Power surge PC damage: How can I test all components of my PC without access to a second computer?

  - by Doug T.

  Ever since we had some crazy power surges last week my 64 bit Windows 7 PC has been acting strange. My USB network adapter disconnects from the wireless and can't detect the signal. I have to disable/reenable the adapter to detect it again. Also my wife has reported that the PC has rebooted a few times while I'm not sitting at it. Today I finally caught the reboot while I was using the PC. I got this blue screen of death. Stop Code 0x00000109: "Modification of system code or a critical data structure was detected." I followed the advice at the linked article and ran a memory test. I used memtest86 and its already found around 300,000 errors out of 8 gigs of ram. Now I'm worried -- what are the odds this is isolated to just my memory and not just a system wide problem? Isn't there a good chance that many other components are fried? More importantly, how can I test those other components? Are there tools similar to memtest I can use to test my motherboard/video card/power supply? If these are vender specific, is it typical for vendors to provide testing tools?

  Read the article

• Windows7: Howto force a "do you really want to shutdown?" dialog

  - by Vokuhila-Oliba

  Sometimes I wanted to choose "logout current user", but then I hit "Shutdown" by accident. Nearly everywhere else Windows7 is asking "do you really want to do this Yes/No". But that's not the case when I hit the "Shutdown" button. Windows7 shuts down immediately without giving me the chance to correct my mistake. Q1: So I am wondering why Windows7 shuts down immediately without asking "really do that?" in this case. Q2: Is there a way to change this behavior? E.g. Could I force Windows7 to display a dialog asking "Do you really want to shutdown ?". ADDED: I am running Windows7 Professional 64bit. ADDED: I tried to change this behavior with the policy editor. It seems to be very easy to completely remove the Shutdown button from the start menu. But I couldn't find an entry to turn on such a Yes/No dialog.

  Read the article

• Booting Windows from different partition than system

  - by szamil

  I have bought an SSD disk, but my laptop (Dell Precision M6300) refuse to use it as a target disk for windows (AHCPI on/off, BIOS up-to-date). I can't exchange the disk unfortunately... But fortunately, I've managed to install windows using USB disk case. The problem is, that when I put that disk as my internal drive it can't boot. (Disk read error, Three Finger Salute ... ) So I tried with Linux (openSUSE), I manage to install it as well, but when I tried to boot GRUB from internal drive I get errors again. (Should I try GRUB2?) I figured out that I can boot into that internal hard drive's openSUSE system using small USB drive with GRUB, kernel and image on it. So, I just run GRUB from USB drive, it loads necessary stuff from the USB drive and then continues from the internal drive. I want to do the same with Windows. But GRUB (rootnoverify and chainloader +1) does not boot my windows on internal drive. The question: is there any chance to copy the critical windows' boot files into the USB drive, to make it possible to boot from that USB drive, but continue booting from internal (different in general) drive? The USB drive would became a system hardware key! ;-) Disk: Plextor M5S 128GB Sata III, laptop has Sata II, but it's compatible anyway, right?

  Read the article

• Swapping RAID sets in and out of the same controller

  - by hazymat

  This is a really simple question, and the answer is probably encoded in various wikipedia articles, however my question is reasonably specific, and I need a bulletproof answer! I'm not sure if my question pertains to hardware RAID in general, or to the specific RAID controller I'm working on. Either way it is the Dell SAS 6/iR (this is an LSI sas1068e chipset). I simply want to: remove a set of striped (RAID 0) disks from this RAID controller in a server put in another set of disks, and create a RAID 1 array (or create a new 'virtual disk', as they call it in the SAS 6/iR manual) Do stuff with the new RAID 1 array Have the option of putting back the old set of disks (the RAID 0 striped ones) I am quite sure this is possible, but I need some form of reliable, evidence-based answer as it's for a client of mine, and I need to migrate their data safely. The question: can I actually do the above? Does the RAID configuration get stored on the disks themselves, or in the hardware controller? Is any data stored in the hardware controller? If there is any chance I cannot completely restore operation of the first set of disks I removed, then I need to know about it! The manual alludes to the answer to this question (see page 45 of this document), and talks about activating an array of disks. I just need someone to confirm I can definitely do the above. See, simple question, right? :)

  Read the article

• Could I have destroyed Partitioning-Scheme/Filesystem of HDDs with External Harddrive Case with builtin Raid-Controller?

  - by th3m3s

  I had just recently bought a Fantec QB-35US3R to have a nice box on my desk to make some backups to. Along with the HDD-Bay I had ordered some 4TB HDDs to let them run in Raid 5, which is handled by the hardware RAID controller of the Fantec HDD-Bay. The QB-35US3R arrived a few days before the hard drives, so I got impatient and had the idea to put three old 1TB disks in the Fantec device, just to test it... Long story short: I made a backup of the most important data on these three disks before they broke. I had set the configuration scheme to RAID 3 at the Fantec device. It seems, that the Fantec RAID controller has "somehow" destroyed the partitioning scheme or the file system, because when put into a HDD docking station, they get recognized by the OS (Ubuntu/Linux) but are not mountable anymore. I tried to recover the data from one HDD via gParted (parted), which ran some hours without success. Here I stopped, before trying other tools, cos I read that the longer a hard drive is running after a the partitioning got destroyed, the worse it gets. What could the HDD-Bay probably have done to my lovely hard drive disks? Is there some routine a RAID controller is executing, when it wants to create a RAID system? Like erasing the partition table (seems not plausible to me.) or writing some information to every hard drive in the RAID (seems more likely to me.)? Is there a chance to recover the data from these HDDs, or is the change a RAID controller makes so significant, that no software is of help?

  Read the article

• Integrating external computer into a domain - some recommendations please

  - by TomTom

  Given: * A multi loation company. Every office has local routers that connect to a central VPN capable rouer in a data center. All fine so far. We now need to move a computer off site into a hosting center across the globe, to get it closer to some supplier computers we work for. it will run limited logic but latency is important, and our latency so far is too large. This computer will be in a data center and does no require incoming connections except for adminsitrative purposes, although it needs outgoing connetions. I have no real chance to put one of my VPN routers there, sadly - otherwise I would have no problem. Usage of RRAs is not recommended (we had various probblems there over time). I could deal with it. The computer MUSt integrate into the corporate structure via VPN and join the domain and be fully "tracked" (controlled for performance). What is the best suggestion? So far it looks like my best bets woudl be to log in via RRAS and deal with whatever issues arise there plus uise the local firewall the limit incoming connections to this computer to what is needed (which runs down to an emergency RDP connection allowance). Anyone a better idea?

  Read the article

• What could possibly cause my computer to power down at random times?

  - by geoffreydv

  I have recently bought a new Power Supply and a new graphics card. My PC ran smoothly for a few months now but since a couple of days I'm having a strange problem. I am trying to isolate the problem to a specific piece of hardware (because if it's either the Power Supply or the Graphics card they are still under warranty). The problem started when I was playing a game (diablo 3). My PC suddenly powered down. I was unable to turn it on again by pressing the power button. I unplugged the power cable for a few seconds and plugged it back in. This time the pc powered on but the indication light turned orange instead of white as it normally does. The fans were not spinning and I did not see anything on my screen. After trying a couple of times I gave up. Two days later I tried again and this time the PC did boot up as usual. Everything looked okay until I tested if the problem was resolved by starting Diablo again. After about two minutes it powered down again as it did the first time. If I don't run any games my PC does power down after about 3-5 hours. Another fact that might be relevant: One time the PC did not shut down immediatly, instead first my graphics "powered down" but the music I was playing kept on playing. After about 20 seconds the pc powered down completely as usual. What I also noticed is that when I boot instantly after a power down, the chance of another power down occuring is much higher. Does anyone have an idea what could be causing this kind of behaviour or has a certain tool to diagnose the specific hardware parts? Thanks Specs: Memory: 6GB Processor: Intel i5 OS: Windows 7 64 bit The PC is a Dell Studio XPS 8100 with a replaced PSU and Graphics card: PSU: Corsair CX500 (500 watt) Graphics card: AMD Radeon 6850

  Read the article

• Private subnet for VM server host-only network

  - by Derek Pressnall

  At my current job, we distribute a product based on a Linux server with multiple VMs defined (using KVM / libvirt). We are planning to expose limited ports to the customer's network, and use iptables to direct inbound traffic to the appropriate internal VM. My question: is there a class of private subnets that I can use for the internal host-only network that is least likely to conflict with a client IP subnet? Specifically, if I choose a /24 out of any of the RFC-1918 defined private subnets (such as 192.168.x.x), there is a chance of conflicting with a customer-used range. I noticed that several current VM implementations default to 192.168.122.x -- is this due to an RFC that I'm not familiar with, and therefore this is a safe range to use (that most network admins would avoid)? Or did the various VM vendors just pick that range randomly? I guess I'm looking for an IP range that is more private than the existing private (RFC1918) addresses. The only other thought I had was to use one of the "Test Net" IP ranges reserved for documentation purposes (RFC 5737). Note, that I'm not worried about a customer's network blocking these IPs, as this is only internal to our server (packets get NATted before leaving the box). However this does seem more unorthodox than just sticking with the default 192.168.122.x/24 subnet.

  Read the article

• Merging two separate DNS zones

  - by cube

  This is a hypothetical question. Let's suppose I have two networks, each with its own DNS server. Network A has names a1.local, a2.local, ... and network B has b1.local, b2.local, .... Zone file for each of the networks looks something like this: $ORIGIN local @ IN SOA .... blah blah blah a1 A 1.2.3.4 a2 A 2.3.4.5 ... for A, and $ORIGIN local @ IN SOA .... blah blah blah b1 A 3.4.5.6 b2 A 4.5.6.7 ... for B. Now I also have a regular internet domain example.com and I want to access the machines as a1.A.example.com, b1.B.example.com, ... How will I have to change the configuration of name servers in networks A and B? (in fact I am writing a super-magic DNS server, currently serving A and B separately, but there is a chance that I will have to add the ability to merge the networks; so I'm interested in knowing the problems which lie ahead of me and how to prepare for the possibility)

  Read the article

• SOA PARTNER COMMUNITY NEWSLETTER JULY 2012

  - by mseika

  SOA PARTNER COMMUNITY NEWSLETTER JULY 2012 Dear SOA partner community member To provide our community members the best of our knowledge, we want your feedback on our SOA Partner community. Thus we are organizing SOA Partner Community Survey 2012. We request you to participate in the survey and give your valuable feedback on various areas of marketing, sales and education. To continue our successful BPM Suite, Oracle is launching together with you Process Accelerators initiative. It’s your opportunity to co-develop and market predefined processes. Oracle Fusion Applications Design Patterns are a great tool to develop your SOA or BPM solution or process accelerators. To promote your SOA & BPM Specialization we continue to offer several benefits. This month we would like to highlight our Specialization Plaques - make sure you request one for your office! Our Fusion Middleware Summer Camps are booked out, if could not get a seat you can attend the SOA & BPM track @ Virtual Developer Day: Oracle Fusion Development Oracle demo systems offer´s two new demos: Business Driven Development based on BPM Suite & SOA Lifecycle Management. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Community SurveyProcess Accelerators KitPlaques SOA & BPM SpecializedSOA & BPM at Virtual Developer Day News from our Partners & CommunityOverview of SOA Diagnostics in 11.1.1.6 Business driven development(BDD) demo now available! SOA Lifecycle Management Oracle Fusion applications design patterns Updated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum COMMUNITY SURVEY Like every year we would like to get your feedback in our SOA Partner Community Survey 2012. Make sure that You attend to further develop our community and support our planning! It is key for us to get your feedback to prepare for the next fiscal year. Back to top PROCESS ACCELERATORS KIT Oracle is very interested to co-develop and market with you, our partners, pre-defined processes for BPM Suite.I am very happy to announce a new program called “Oracle BPM Partner Solution Catalog”. This program will provide a one-stop shop for our customers looking for Oracle BPM partner solutions available in the market today.The Oracle BPM Solution Catalog will be hosted on our very popular Oracle Technology Network (OTN). To give you an idea of the scale of customer visibility, OTN today receives over 1Million hits per day from our business and developer community. We would like to invite you to list your Oracle BPM 11g solutions available today.In order to participate in this program, you need to do the following: Fill in the attached slide templates - #3 and #4 for each Oracle BPM 11g solution you would like to list on OTN.Please add links to whitepapers , videos, references to the specific solution in the template slide. We recommend that you create a landing page on your website for these linked artifacts and just point to the same from within the PowerPoint template. This will give you the flexibility to update the information as frequently as needed. If you have the particular solution in production or a reference available, please list them as well. Send the PowerPoint template slides (1 set of slides for each Oracle BPM solution) to [email protected]. In addition to having the opportunity to list your solutions on OTN for Oracle customers, you will have the chance to advertise your new wins/implementations/solutions in an Oracle Sponsored PM Webinar held every quarter. This program is targeted to go live by the end of summer 2012. At this point, we are targeting a soft launch in July end 2012 so send on your BPM solutions information as soon as possible. We would love to have your solution(s) listed in the “Oracle BPM Partner Solution Catalog” at the time of the launch. This will be a live repository so you can keep adding more solutions as they become available. If you have any questions, please feel free to contact us [email protected], Product Strategy Director, Oracle BPM , Phone +1 650.506.5486.Thank you and look forward to hearing from you. Oracle BPM team Process Accelerators Overview.pdf ProcessAcceleratorsDataSheet.pdf Demos draUPK.zip & trmUPK.zip BPM Solution repository slides.ppt Additional BPM material BPM Process Development Lifecycle Document that describes recommended approach to collaborative process modeling across business and IT tools ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) by Andrejus Baranovskis BPMN process editor problems in 11.1.1.6 by Mark Nelson BPM – Disable DBMS job to refresh B2B Materialized View by Mark Nelson For the complete kit please visit the BPM folder at our SOA Community Workspace (SOA Community membership required). For the complete presentation please visit our SOA Community Workspace (SOA Community membership required). Information is Oracle and Partner confidential! Back to top PLAQUES SOA & BPM SPECIALIZED We continue to offer you a nice SOA & BPM Specialization plaque with your logo to proof your success. If you are a SOA or BPM Specialized partner and would like to request the plaque please send Brigitte an e-mail with the following information: Partner Name Partner logo (preferred eps file) Partner Status gold or platinum Your shipping address Your Specialization: SOA or BPM We recommend to mount the plaque at your office reception in addition you can use the SOA Specialization logos at your website download Logo: Gold & Platinum or the BPM logos Gold & Platinum Back to top SOA & BPM AT VIRTUAL DEVELOPER DAY Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staffOracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications.Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect - this event has something for everyone. Don’t miss this opportunity.Tuesday, July 10, 2012. 9:00 a.m. PT -1:00 p.m. PT 11:00 a.m. CT - 3:00 p.m. CT 12:00 p.m. ET - 4:00 p.m. ET 1:00 p.m. BRT - 5:00 p.m. BRT Register online now! for this FREE event. Agenda: 09:00 am Opening 09:30 am Keynote: Oracle Fusion Development Track1Introduction to Fusion Development Track2What's New in Fusion Development Track3Fusion Development in the Enterprise 10:00 am Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 am Rich Web UI made simple - an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration *Hands On Lab – WebCenter and ADF Lab w/ JDeveloper - Lab materials will be provided ahead of the event to give you ample time to work through the lab and increase the productivity of the live chat sessions the day of the event. Sessions abstractsRegister online now! for this FREE event Read more on Community Events and post your comment here. Back to top NEWS FROM OUR PARTNERS AND COMMUNITY Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity JDeveloper & ADF?Troubleshooting BPMN process editor problems in 11.1.1.6http://dlvr.it/1p0FfS SOA Community?SOA & BPM @ Virtual Developer Day: Oracle Fusion Development - July 10th 2012https://soacommunity.wordpress.com/2012/07/02/soa-bpm-virtual-developer-day- oracle-fusion-developmentjuly-10th-2012/#soacommunity #soa #bom #education orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove.http://ow.ly/1kYqES SOA CommunitySOA Community Newsletter June 2012http://wp.me/p10C8u-qw SOA CommunityBPMN process editor problems in 11.1.1.6 by Mark Nelsonhttp://redstack.wordpress.com/2012/06/27/ bpmn-process-editor-problems-in-11-1-1-6 #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization)http://fb.me/1coX4r1X1 SOA CommunitySOA Learning Library provides a comprehensive curriculum for the SOA and BPM product suites https://soacommunity.wordpress.com/2012/06/27/soa-learning-library #soacommunity #soa #bpm OTNArchBeat ?A Universal JMX Client for Weblogic - Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koserhttp://pub.vitrue.com/mQVZ OTNArchBeat ?BPM - Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0Oracle SOA ?Learn how Choice Hotels Implements Innovative Google Maps Solution with #OracleSOA http://bit.ly/MTwIJ3 SOA Communitytop Tweets SOA Partner Community - June 2012 Send your tweets @soacommunity #soacommunity https://soacommunity.wordpress.com/2012/06/25/top-tweets-soa-partner-community-june-2012 Torsten Winterberg#OPITZ is pushing Oracle commitment to the next level: New Specializations done: ADF, BPM, WLS, Exadatahttp://bit.ly/KX1WVS ServiceTechSymposium ?Only 8 more days left until Super Early Bird Registration Discount expires! http://www.servicetechsymposium.com OracleBlogsSOA Management in 3 minutes - Video explainerhttp://ow.ly/1kN5pn SOA Community ?SOA, Cloud & Service Technology Symposium 2012 London - Enter Promo Code: Djmxz370https://soacommunity.wordpress.com/2012/06/22/soa-cloud-service-technology-symposium-2012-london #soasymposium #soacommunity #soa Heidi BuelowGreat course! w David Read RT @soacommunity: product management ADF for BPM training 5 seats left https://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity SOA Community ?product management ADF for BPM training 5 seats lefthttps://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity OTNArchBeat ?Oacle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broinhttp://pub.vitrue.com/UEiF OTNArchBeat ?SOA, Cloud & Service Technology Symposium 2012London - Special Oracle Discounthttp://pub.vitrue.com/8E0J SOA CommunityBecome a facebook fan of soacommunity http://www.facebook.com/soacommunity #soacommunity SOA Community ?SOA Suite HealthCare Integration Architecture https://blogs.oracle.com/SOAForHealthcare/entry/soa_suite_healthcare_integration_architecture #soacommunity #soa Andrejus Baranovskis ?Running Pre-built Virtual Machine for SOA Suite and BPM Suite 11g PS5 on Mac OS X Snow Leopard (10.6http://fb.me/vB8nO0Vg OracleBlogsPrinciples of Service-Oriented Architecture by Douwe P. van den Bos http://ow.ly/1kIcOP OTNArchBeatOracle Public Cloud Architecture | @TylerJewell http://ow.ly/bHAcL The SOA Network ?Business Process Management, Service-Oriented Architecture, and Web 2.0: Business Transformation or.http://bit.ly/LBgREL #ITNews #SOA OracleBlogs ?Oracle SOA Foundation Practitioner Certificationhttp://ow.ly/1kGYYg Frank Nimphius ?Learn Advanced ADF. ORACLE Fusion Middleware Summer Camps in Lisbon - July 9th - 13thhttp://bit.ly/KGCl3i SOA CommunityTransform Your Application Integration with Best Practices from Oracle Customershttps://blogs.oracle.com/SOA/entry/transform_your_application_integration_with #soacommunity #soa #bpm Simone GeibWhat you always wanted to know about #oraclesoa diagnostics: Shawn Bailey, Overview of SOA Diagnostics in 11.1.1.6,http://ow.ly/bxK0M Oracle SOA ?Save the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to #oraclesoa http://bit.ly/LsNDGl OTNArchBeat ?New VirtualBox images for Oracle SOA Suite & Oracle BPM Suite 11.1.1.6.0http://ow.ly/bwDAl OracleBlogs ?Process development lifecycle in Oracle BPM 11g http://ow.ly/1ktesY Daniel AmadeiNew post: Oracle BPEL 11g Message Delivery & Recovery.http://amadei.com.br/blog/index.php /oracle-bpel-11g-message-delivery SOA Community ?Sending out the June edition of the #soacommunity newsletter - read it or become a member http://www.oracle.com/goto/emea/soa!#soa #bpm Arun Pareek ?For the past six months Ahmed Aboulnaga and me have been working on Oracle SOA Suite 11g Administrator's Handbook.http://lnkd.in/CAvpUQ SOA CommunitySun shine all day no clouds - solar eclipse is over... #sunshine #cloud http://www.infoq.com/presentations/Swarm-Computing Michel SchildmeijerWatch my blog Oracle Service Bus 11g: listing projects and services with WLST - part 1 http://lnkd.in/B7f3GQ @TITAN_GS @wlscommunity OTNArchBeatBook Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Rahejahttp://ow.ly/bn2cc OTNArchBeat ?Driving from Business Architecture to Business Process Services | @vghariharan http://ow.ly/bn5UB OTNArchBeat ?SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 - Part II | Dawit Lessanu http://ow.ly/bn6sX Simone Geib ?Contact me directly for ideas how to improvehttp://bit.ly/advancedsoasuite and additional posts, presentations, white papers, ... #soasuite Simone Geib ?#soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite OracleBlogs ?June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA ServiceTechSymposium ?New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOeDebra Lilley ?looks good - real proof people are using the apps ! RT @fteter: Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps demed ?rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA CommunityMiddleware Oracle Excellence Awards 2012-HAPPY NEW YEAR! https://soacommunity.wordpress.com/2012/05/31/middleware-oracle-excellence-awards-2012happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle SOA CommunityHappy New Year #soacommunity thanks for the business! Time for a drink http://pic.twitter.com/zkK08KWB OTNArchBeat ?Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q SOA Communitytop Tweets SOA Partner Community &ndash; May 2012 http://wp.me/p10C8u-pP ServiceTechSymposiumNew session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com/agenda2012.php #elastic_soa_in_the_cloud orclateamsoa ?A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11Ghttp://ow.ly/1k2cnl ServiceTechSymposium ?New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Linkhttp://www.servicetechsymposium.com/agenda2012.php#soa_governance_at_edp SOA Community ?VirtualBox image SOA Suite & BPM Suite 11.1.1.6.0&ndash;Your feedback?http://wp.me/p10C8u-qh Oracle MiddlewareSave the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to#oraclesoa http://bit.ly/LU1y5N OTNArchBeat ?Goodbye, Silos. Hello SOA. | @stephanieoverbyhttp://pub.vitrue.com/NJJO SOA CommunityBPM Standard Edition - to start your BPM project http://wp.me/p10C8u-qj Please feel free to send us your news! And add your blog to our SOA blog wiki. Back to top OVERVIEW OF SOA DIAGNOSTICS IN 11.1.1.6 What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections.In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. read the full blog post here. Read more on Oracle and post your comment here. Back to top BUSINESS DRIVEN DEVELOPMENT (BDD) DEMO NOW AVAILABLE! For access to the Oracle demo systems please visit OPN and talk to your Partner Expert DSS is pleased to announce the availability of the demo “Business Driven Development“. This innovative demonstration uses a case-study approach to show business users how they can easily streamline their Business Processes - delivering greater efficiency, agility, visibility and collaboration with Oracle BPM and WebCenter. The BDD demonstration uses a case study-based approach to highlight a business problem at a fictional company, Avitek Corporation, and uses Oracle BPM and Oracle WebCenter to solve the business problem. This holistic approach has specifically been used to appeal to a non-technical business analyst user. This demo is NOT focused on product features, but aims to guide users through a complete BPM lifecycle. The scenario is based on improving a simple order process (scenario details are in the demo script). Avitek Corporation is sufferinng from a manual email-driven ordering process. Sales reps don’t know where the customer orders are stuck (no visibility) and finance users are unable to manually approve every order (no automation). There are several areas where this process can be improved with Business Process Management technology. This demo shows how improving following areas will ignificantly help resolve the business problems Avitek Corporation is facing. Areas for improvement include: Utilizing BPM for process management, rather than an unregulated, email-based process. Utilizing automated services, rather than requiring a human to key into a system. For example, Finance checking the customer’s credit rating is something that could be automated. Centralizing business rules that can be integrated into a business process, rather than requiring a human to process them. For example, Finance must determine when orders can be automatically approved. Provide insight and visibility into the process. For example, Sales Rep needs to know the status of their customer’s orders. The BDD Demo uses the following products. Oracle BPM Suite 11g PS4FP Oracle WebCenter 11g PS4FP (for Process Spaces) Oracle Business Activity Monitoring 11g Oracle Database 11g Back to top SOA LIFECYCLE MANAGEMENT For access to the Oracle demo systems please visit OPN and talk to your Partner Expert We are pleased to announce the availability of the SOA Management demo that showcases some of the key provisioning and lifecycle management capabilities of SOA Management Pack Enterprise Edition (EE). This demo specifically focuses on some of the lifecycle management solutions for Oracle SOA Suite and Oracle Service Bus (OSB). Demo Highlights The demo showcases the following capabilities. Provisioning of SOA Composites Provisioning of OSB Projects Provision SOA and OSB artifacts in a future maintenance window Back to top ORACLE FUSION APPLICATIONS DESIGN PATTERNS The Oracle Fusion Applications user experience design patterns are published! These new, reusable usability solutions and best-practices, which will join the Oracle dashboard patterns and guidelines that are already available online, are used by Oracle to artfully bring to life a new standard in the user experience, or UX, of enterprise applications. Now, the Oracle applications development community can benefit from the science behind the Oracle Fusion Applications user experience, too. These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight when: tailoring an Oracle Fusion application, creating coexistence solutions that existing users will be delighted with, thus enabling graceful user transitions to Oracle Fusion Applications down the road, or designing exciting, new, highly usable applications in the cloud or on-premise. Based on the Oracle Application Development Framework (ADF) components, the Oracle Fusion Applications patterns and guidelines are proven with real users and in the Applications UX usability labs, so you can get right to work coding productivity-enhancing designs that provide an advantage for your entire business. What’s the best way to get started? We’ve made that easy, too. The Design Filter Tool (DeFT) selects the best pattern for your user type and task. Simply adapt your selection for your own task flow and content, and you’re on your way to a really great applications user experience. More Oracle applications design patterns and training are coming your way in the future. To provide feedback on the sets that are currently available, let me know in the comments! Read more on Fusionapps and post your comment here. Back to top UPDATED ORACLE MATERIAL Integrated SOA Gateway Documentation - Implementation Guide | Developer’s Guide Webcast Series: Oracle’s SOA and Oracle Business Process Management Solutions (Choice Hotels, Eaton, Farmers Insurance) BAM design pointers By Kavitha Srinivasan Seeking Oracle Fusion Middleware Go Live StoriesOracle Fusion Middleware product management is looking for recent go live stories to share with the Oracle sales team, sales consulting, product management and other internal groups. Customer contact details may remain anonymous. Your successful implementation will be featured in a quarterly report. The chance to present on an internal webcast is also available. Contact Maria Forney ([email protected]) if you have a noteworthy implementation success story. This is a good opportunity for partners interested in showcasing Oracle Fusion Middleware implementations, and gaining more exposure within Oracle. Performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources Back to top HAVE YOU MISSED OUR LAST SOA PARTNER COMMUNITY WEBCASTS? UPK Webcast Business Driven Application Management & BPM11g & Application Grid & GoldenGate & Fusion Middleware Pricing & OC4J to WebLogic & Next Generation SOA & Fusion Middleware in Utility & Fusion Middleware in Communications & Fusion Middleware in Public Services & Fusion Middleware in Financial Services Please check your local OPN trainings calendar for additional training dates and locations. Back to top SOA PARTNER COMMUNITY CALENDAR On-Demand Trainings Event Name Language Type SOA Virtual Developers Day English Tech In-Class Trainings Date Event name Location / Country Contact person Type 09-13.07.2012 BPM Suite 11g advanced training by David Read Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 ADF 11g advanced training by Grant Ronald and Frank Nimphius Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Lisbon, Portugal Jürgen Kress Tech 10.07.2012 Fusion Middleware Virtual Developer Day Online OTN Tech 10- 12.07.2012 WebLogic 12c training by Cosmin Tudor Lisbon, Portugal Jürgen Kress Tech 16-18.07.2012 SOA Suite 11g advanced training by Niall Commiskey Munich, Germany Jürgen Kress Tech 16-18.07.2012 ADF for BPM Suite 11g advanced training by David Read Munich, Germany Jürgen Kress Tech 16-18.07.2012 WebCenter Sites 11g advanced training by Product Management Munich, Germany Jürgen Kress Tech 17-20.07.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 23-26.07.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 29-31.08.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 02-05.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 28-30.11.2012 Oracle AIA 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 11-14.12.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 20-22.2.2013 Oracle AIA 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 14-17.1.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.3.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech Please check your local OPN Training Calendar for additional training and locations here. Back to top SOASCHOOL.COM - SOA CERTIFIED PROFESSIONAL(SOACP) PROGRAM The SOASchool.com - SOA Certified Professional (SOACP) program is dedicated to excellence in the field of SOA and service-oriented computing. Through a series of seasoned course modules and exams, IT professionals have the opportunity to obtain a number of different certifications to recognize their accomplishment of gaining "project ready" SOA proficiency. This comprehensive and strictly vendor-neutral program was developed in cooperation with best-selling SOA author Thomas Erl and several major SOA organizations and academic institutions. Through the involvement of the SOA Education Committee, course contents and certification requirements are constantly reviewed and revised to stay current with developments in the service-oriented computing industry. The program is currently comprised of 12 course modules and 5 certifications and is expanding to 18 course modules and 8 certifications throughout 2009. For more information, visit www.soaschool.com and www.soacp.com. Blog Twitter LinkedIn Mix Forum Wiki Back to top YOUR CONTENT ON THE NEWSLETTER AND ON THE SOA COMMUNITY PORTAL Publishing Your StoriesWe would like to invite our partners to publish information in the newsletter or on our SOA Community portal. Especially we are looking for your real life experience with our SOA technology. Please send your documents to Jürgen Kress. We look forward to getting your suggestions! Back to top SOA DISCUSSION FORUM BECOMES INTERACTIVE AT THE SOA COMMUNITY! Do you want to chat to experts, including partners and Oracle SOA Product Development? Do you want to get the latest information about our SOA solutions and events?Attend our private online SOA Discussion Forum at OTN. Please send your OTN forums user name to Brigitte Felisaz. You must be a registered user to access the SOA Discussion Forum. Back to top INVITE YOUR COLLEAGUES TO JOIN THE SOA COMMUNITY Please feel free to invite your colleagues to join the SOA Community and to participate in the SOA Assessment tests. For registration please login the Oracle PartnerNetwork and go to: www.oracle.com/goto/emea/soa For any questions on the above or concerning SOA and Oracle in general please contact the Oracle EMEA Alliances & Channels SOA Team. Best regardsOracle EMEA SOA TeamJürgen Kress Jürgen KressSOA Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

  Read the article

• Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6?

  - by Ricardo Ferreira

  In this post, I will cover some technical differences between Oracle WebLogic 12c and JBoss EAP 6, which was released a couple days ago from Red Hat. This article claims to help you in the evaluation of key points that you should consider when choosing for an Java EE application server. In the following sections, I will present to you some important aspects that most customers ask us when they are seriously evaluating for an middleware infrastructure, specially if you are considering JBoss for some reason. I would suggest that you keep the following question in mind while you are reading the points: "Why should I choose JBoss instead of WebLogic?" 1) Multi Datacenter Deployment and Clustering - D/R ("Disaster & Recovery") architecture support is embedded on the WebLogic Server 12c product. JBoss EAP 6 on the other hand has no direct D/R support included, Red Hat relies on third-part tools with higher prices. When you consider a middleware solution to host your business critical application, you should worry with every architectural aspect that are related with the solution. Fail-over support is one little aspect of a truly reliable solution. If you do not worry about D/R, your solution will not be reliable. Having said that, with Red Hat and JBoss EAP 6, you have this extra cost that will increase considerably the total cost of ownership of the solution. As we commonly hear from analysts, open-source are not so cheaper when you start seeing the big picture. - WebLogic Server 12c supports advanced LAN clustering, detection of death servers and have a common alert framework. JBoss EAP 6 on the other hand has limited LAN clustering support with no server death detection. They do not generate any alerts when servers goes down (only if you buy JBoss ON which is a separated technology, but until now does not support JBoss EAP 6) and manual intervention are required when servers goes down. In most cases, admin people must rely on "kill -9", "tail -f someFile.log" and "ps ax | grep java" commands to manage failures and clustering anomalies. - WebLogic Server 12c supports the concept of Node Manager, which is a separated process that runs on the physical | virtual servers that allows extend the administration of the cluster to WebLogic managed servers that are often distributed across multiple machines and geographic locations. JBoss EAP 6 on the other hand has no equivalent technology. Whole server instances must be managed individually. - WebLogic Server 12c Node Manager supports Coherence to boost performance when managing servers. JBoss EAP 6 on the other hand has no similar technology. There is no way to coordinate JBoss and infiniband instances provided by JBoss using high throughput and low latency protocols like InfiniBand. The Node Manager feature also allows another very important feature that JBoss EAP lacks: secure the administration. When using WebLogic Node Manager, all the administration tasks are sent to the managed servers in a secure tunel protected by a certificate, which means that the transport layer that separates the WebLogic administration console from the managed servers are secured by SSL. - WebLogic Server 12c are now integrated with OTD ("Oracle Traffic Director") which is a web server technology derived from the former Sun iPlanet Web Server. This software complements the web server support offered by OHS ("Oracle HTTP Server"). Using OTD, WebLogic instances are load-balanced by a high powerful software that knows how to handle SDP ("Socket Direct Protocol") over InfiniBand, which boost performance when used with engineered systems technologies like Oracle Exalogic Elastic Cloud. JBoss EAP 6 on the other hand only offers support to Apache Web Server with custom modules created to deal with JBoss clusters, but only across standard TCP/IP networks.  2) Application and Runtime Diagnostics - WebLogic Server 12c have diagnostics capabilities embedded on the server called WLDF ("WebLogic Diagnostic Framework") so there is no need to rely on third-part tools. JBoss EAP 6 on the other hand has no diagnostics capabilities. Their only diagnostics tool is the log generated by the application server. Admin people are encouraged to analyse thousands of log lines to find out what is going on. - WebLogic Server 12c complement WLDF with JRockit MC ("Mission Control"), which provides to administrators and developers a complete insight about the JVM performance, behavior and possible bottlenecks. WebLogic Server 12c also have an classloader analysis tool embedded, and even a log analyzer tool that enables administrators and developers to view logs of multiple servers at the same time. JBoss EAP 6 on the other hand relies on third-part tools to do something similar. Again, only log searching are offered to find out whats going on. - WebLogic Server 12c offers end-to-end traceability and monitoring available through Oracle EM ("Enterprise Manager"), including monitoring of business transactions that flows through web servers, ESBs, application servers and database servers, all of this with high deep JVM analysis and diagnostics. JBoss EAP 6 on the other hand, even using JBoss ON ("Operations Network"), which is a separated technology, does not support those features. Red Hat relies on third-part tools to provide direct Oracle database traceability across JVMs. One of those tools are Oracle EM for non-Oracle middleware that manage JBoss, Tomcat, Websphere and IIS transparently. - WebLogic Server 12c with their JRockit support offers a tool called JRockit Flight Recorder, which can give developers a complete visibility of a certain period of application production monitoring with zero extra overhead. This automatic recording allows you to deep analyse threads latency, memory leaks, thread contention, resource utilization, stack overflow damages and GC ("Garbage Collection") cycles, to observe in real time stop-the-world phenomenons, generational, reference count and parallel collects and mutator threads analysis. JBoss EAP 6 don't even dream to support something similar, even because they don't have their own JVM. 3) Application Server Administration - WebLogic Server 12c offers a complete administration console complemented with scripting and macro-like recording capabilities. A single WebLogic console can managed up to hundreds of WebLogic servers belonging to the same domain. JBoss EAP 6 on the other hand has a limited console and provides a XML centric administration. JBoss, after ten years, started the development of a rudimentary centralized administration that still leave a lot of administration tasks aside, so admin people and developers must touch scripts and XML configuration files for most advanced and even simple administration tasks. This lead applications to error prone and risky deployments. Even using JBoss ON, JBoss EAP are not able to offer decent administration features for admin people which must be high skilled in JBoss internal architecture and its managing capabilities. - Oracle EM is available to manage multiple domains, databases, application servers, operating systems and virtualization, with a complete end-to-end visibility. JBoss ON does not provide management capabilities across the complete architecture, only basic monitoring. Even deployment must be done aside JBoss ON which does no integrate well with others softwares than JBoss. Until now, JBoss ON does not supports JBoss EAP 6, so even their minimal support for JBoss are not available for JBoss EAP 6 leaving customers uncovered and subject to high skilled JBoss admin people. - WebLogic Server 12c has the same administration model whatever is the topology selected by the customer. JBoss EAP 6 on the other hand differentiates between two operational models: standalone-mode and domain-mode, that are not consistent with each other. Depending on the mode used, the administration skill is different. - WebLogic Server 12c has no point-of-failures processes, and it does not need to define any specialized server. Domain model in WebLogic is available for years (at least ten years or more) and is production proven. JBoss EAP 6 on the other hand needs special processes to garantee JBoss integrity, the PC ("Process-Controller") and the HC ("Host-Controller"). Different from WebLogic, the domain model in JBoss is quite new (one year at tops) of maturity, and need to mature considerably until start doing things like WebLogic domain model does. - WebLogic Server 12c supports parallel deployment model which enables some artifacts being deployed at the same time. JBoss EAP 6 on the other hand does not have any similar feature. Every deployment are done atomically in the containers. This means that if you have a huge EAR (an EAR of 120 MB of size for instance) and deploy onto JBoss EAP 6, this EAR will take some minutes in order to starting accept thread requests. The same EAR deployed onto WebLogic Server 12c will reduce the deployment time at least in 2X compared to JBoss. 4) Support and Upgrades - WebLogic Server 12c has patch management available. JBoss EAP 6 on the other hand has no patch management available, each JBoss EAP instance should be patched manually. To achieve such feature, you need to buy a separated technology called JBoss ON ("Operations Network") that manage this type of stuff. But until now, JBoss ON does not support JBoss EAP 6 so, in practice, JBoss EAP 6 does not have this feature. - WebLogic Server 12c supports previuous WebLogic domains without any reconfiguration since its kernel is robust and mature since its creation in 1995. JBoss EAP 6 on the other hand has a proven lack of supportability between JBoss AS 4, 5, 6 and 7. Different kernels and messaging engines were implemented in JBoss stack in the last five years reveling their incapacity to create a well architected and proven middleware technology. - WebLogic Server 12c has patch prescription based on customer configuration. JBoss EAP 6 on the other hand has no such capability. People need to create ticket supports and have their installations revised by Red Hat support guys to gain some patch prescription from them. - Oracle WebLogic Server independent of the version has 8 years of support of new patches and has lifetime release of existing patches beyond that. JBoss EAP 6 on the other hand provides patches for a specific application server version up to 5 years after the release date. JBoss EAP 4 and previous versions had only 4 years. A good question that Red Hat will argue to answer is: "what happens when you find issues after year 5"?  5) RAC ("Real Application Clusters") Support - WebLogic Server 12c ships with a specific JDBC driver to leverage Oracle RAC clustering capabilities (Fast-Application-Notification, Transaction Affinity, Fast-Connection-Failover, etc). Oracle JDBC thin driver are also available. JBoss EAP 6 on the other hand ships only the standard Oracle JDBC thin driver. Load balancing with Oracle RAC are not supported. Manual intervention in case of planned or unplanned RAC downtime are necessary. In JBoss EAP 6, situation does not reestablish automatically after downtime. - WebLogic Server 12c has a feature called Active GridLink for Oracle RAC which provides up to 3X performance on OLTP applications. This seamless integration between WebLogic and Oracle database enable more value added to critical business applications leveraging their investments in Oracle database technology and Oracle middleware. JBoss EAP 6 on the other hand has no performance gains at all, even when admin people implement some kind of connection-pooling tuning. - WebLogic Server 12c also supports transaction and web session affinity to the Oracle RAC, which provides aditional gains of performance. This is particularly interesting if you are creating a reliable solution that are distributed not only in an LAN cluster, but into a different data center. JBoss EAP 6 on the other hand has no such support. 6) Standards and Technology Support - WebLogic Server 12c is fully Java EE 6 compatible and production ready since december of 2011. JBoss EAP 6 on the other hand became fully compatible with Java EE 6 only in the community version after three months, and production ready only in a few days considering that this article was written in June of 2012. Red Hat says that they are the masters of innovation and technology proliferation, but compared with Oracle and even other proprietary vendors like IBM, they historically speaking are lazy to deliver the most newest technologies and standards adherence. - Oracle is the steward of Java, driving innovation into the platform from commercial and open-source vendors. Red Hat on the other hand does not have its own JVM and relies on third-part JVMs to complete their application server offer. 95% of Red Hat customers are using Oracle HotSpot as JVM, which means that without Oracle involvement, their support are limited exclusively to the application server layer and we all know that most problems are happens in the JVM layer. - WebLogic Server 12c supports natively JDK 7, which empower developers to explore the maximum of the Java platform productivity when writing code. This feature differentiate WebLogic from others application servers (except GlassFish that are also managed by Oracle) because the usage of JDK 7 introduce such remarkable productivity features like the "try-with-resources" enhancement, catching multiple exceptions with one try block, Strings in the switch statements, JVM improvements in terms of JDBC, I/O, networking, security, concurrency and of course, the most important feature of Java 7: native support for multiple non-Java languages. More features regarding JDK 7 can be found here. JBoss EAP 6 on the other hand does not support JDK 7 officially, they comment in their community version that "Java SE 7 can be used with JBoss 7" which does not gives you any guarantees of enterprise support for JDK 7. - Oracle WebLogic Server 12c supports integration with Spring framework allowing Spring applications to use WebLogic special transaction manager, exposing bean interfaces to WebLogic MBeans to take advantage of all WebLogic monitoring and administration advantages. JBoss EAP 6 on the other hand has no special integration with Spring. In fact, Red Hat offers a suspicious package called "JBoss Web Platform" that in theory supports Spring, but in practice this package does not offers any special integration. It is just a facility for Red Hat customers to have support from both JBoss and Spring technology using the same customer support. 7) Lightweight Development - Oracle WebLogic Server 12c and Oracle GlassFish are completely integrated and can share applications without any modifications. Starting with the 12c version, WebLogic now understands natively GlassFish deployment descriptors and specific configurations in order to offer you a truly and reliable migration path from a community Java EE application server to a enterprise middleware product like WebLogic. JBoss EAP 6 on the other hand has no support to natively reuse an existing (or still in development) application from JBoss AS community server. Users of JBoss suffer of critical issues during deployment time that includes: changing the libraries and dependencies of the application, patching the DTD or XSD deployment descriptors, refactoring of the application layers due classloading issues and anomalies, rebuilding of persistence, business and web layers due issues with "usage of the certified version of an certain dependency" or "frameworks that Red Hat potentially does not recommend" etc. If you have the culture or enterprise IT directive of developing Java EE applications using community middleware to in a certain future, transition to enterprise (supported by a vendor) middleware, Oracle WebLogic plus Oracle GlassFish offers you a more sustainable solution. - WebLogic Server 12c has a very light ZIP distribution (less than 165 MB). JBoss EAP 6 ZIP size is around 130 MB, together with JBoss ON you have more 100 MB resulting in a higher download footprint. This is particularly interesting if you plan to use automated setup of application server instances (for example, to rapidly setup a development or staging environment) using Maven or Hudson. - WebLogic Server 12c has a complete integration with Maven allowing developers to setup WebLogic domains with few commands. Tasks like downloading WebLogic, installation, domain creation, data sources deployment are completely integrated. JBoss EAP 6 on the other hand has a limited offer integration with those tools.  - WebLogic Server 12c has a startup mode called WLX that turns-off EJB, JMS and JCA containers leaving enabled only the web container with Java EE 6 web profile. JBoss EAP 6 on the other hand has no such feature, you need to disable manually the containers that you do not want to use. - WebLogic Server 12c supports fastswap, which enables you to change classes without redeployment. This is particularly interesting if you are developing patches for the application that is already deployed and you do not want to redeploy the entire application. This is the same behavior that most application servers offers to JSP pages, but with WebLogic Server 12c, you have the same feature for Java classes in general. JBoss EAP 6 on the other hand has no such support. Even JBoss EAP 5 does not support this until now. 8) JMS and Messaging - WebLogic Server 12c has a proven and high scalable JMS implementation since its initial release in 1995. JBoss EAP 6 on the other hand has a still immature technology called HornetQ, which was introduced in JBoss EAP 5 replacing everything that was implemented in the previous versions. Red Hat loves to introduce new technologies across JBoss versions, playing around with customers and their investments. And when they are asked about why they have changed the implementation and caused such a mess, their answer is always: "the previous implementation was inadequate and not aligned with the community strategy so we are creating a new a improved one". This Red Hat practice leads to uncomfortable investments that in a near future (sometimes less than a year) will be affected in someway. - WebLogic Server 12c has troubleshooting and monitoring features included on the WebLogic console and WLDF. JBoss EAP 6 on the other hand has no direct monitoring on the console, activity is reflected only on the logs, no debug logs available in case of JMS issues. - WebLogic Server 12c has extremely good performance and scalability. JBoss EAP 6 on the other hand has a JMS storage mechanism relying on Oracle database or MySQL. This means that if an issue in production happens and Red Hat affirms that an performance issue is happening due to database problems, they will not support you on the performance issue. They will orient you to call Oracle instead. - WebLogic Server 12c supports messaging enterprise features like SAF ("Store and Forward"), Distributed Queues/Topics and Foreign JMS providers support that leverage JMS implementations without compromise developer code making things completely transparent. JBoss EAP 6 on the other hand do not even dream to support such features. 9) Caching and Grid - Coherence, which is the leading and most mature data grid technology from Oracle, is available since early 2000 and was integrated with WebLogic in 2009. Coherence and WebLogic clusters can be both managed from WebLogic administrative console. Even Node Manager supports Coherence. JBoss on the other hand discontinued JBoss Cache, which was their caching implementation just like they did with the messaging implementation (JBossMQ) which was a issue for long term customers. JBoss EAP 6 ships InfiniSpan version 1.0 which is immature and lack a proven record of successful cases and reliability. - WebLogic Server 12c has a feature called ActiveCache which uses Coherence to, without any code changes, replicate HTTP sessions from both WebLogic and other application servers like JBoss, Tomcat, Websphere, GlassFish and even Microsoft IIS. JBoss EAP 6 on the other hand does have such support and even when they do in the future, they probably will support only their own application server. - Coherence can be used to manage both L1 and L2 cache levels, providing support to Oracle TopLink and others JPA compliant implementations, even Hibernate. JBoss EAP 6 and Infinispan on the other hand supports only Hibernate. And most important of all: Infinispan does not have any successful case of L1 or L2 caching level support using Hibernate, which lead us to reflect about its viability. 10) Performance - WebLogic Server 12c is certified with Oracle Exalogic Elastic Cloud and can run unchanged applications at this engineered system. This approach can benefit customers from Exalogic optimization's of both kernel and JVM layers to boost performance in terms of 10X for web, OLTP, JMS and grid applications. JBoss EAP 6 on the other hand has no investment on engineered systems: customers do not have the choice to deploy on a Java ultra fast system if their project becomes relevant and performance issues are detected. - WebLogic Server 12c maintains a performance gain across each new release: starting on WebLogic 5.1, the overall performance gain has been close to 4X, which close to a 20% gain release by release. JBoss on the other hand does not provide SPECJAppServer or SPECJEnterprise performance benchmarks. Their so called "performance gains" remains hidden in their customer environments, which lead us to think if it is true or not since we will never get access to those environments. - WebLogic Server 12c has industry performance benchmarks with submissions across platforms and configurations leading SPECJ. Oracle WebLogic leads SPECJAppServer performance in multiple categories, fitting all customer topologies like: dual-node, single-node, multi-node and multi-node with RAC. JBoss... again, does not provide any SPECJAppServer performance benchmarks. - WebLogic Server 12c has a feature called work manager which allows your application to embrace new performance levels based on critical resource utilization of the CPUs usage. Work managers prioritizes work and allocates threads based on an execution model that takes into account administrator-defined parameters and actual run-time performance and throughput. JBoss EAP 6 on the other hand has no compared feature and probably they never will. Not supporting such feature like work managers, JBoss EAP 6 forces admin people and specially developers to uncover performance gains in a intrusive way, rewriting the code and doing performance refactorings. 11) Professional Services Support - WebLogic Server 12c and any other technology sold by Oracle give customers the possibility of hire OCS ("Oracle Consulting Services") to manage critical scenarios, deployment assistance of new applications, high skilled consultancy of architecture, best practices and people allocation together with customer teams. All OCS services are available without any restrictions, having the customer bought software from Oracle or just starting their implementation before any acquisition. JBoss EAP 6 or Red Hat to be more specifically, only offers professional services if you buy subscriptions from them. If you are developing a new critical application for your business and need the help of Red Hat for a serious issue or architecture decision, they will probably say: "OK... I can help you but after you buy subscriptions from me". Red Hat also does not allows their professional services consultants to manage environments that uses community based software. They will probably force you to first buy a subscription, download their "enterprise" version and them, optionally hire their consultants. - Oracle provides you our university to educate your team into our technologies, including of course specialized trainings of WebLogic application server. At any time and location, you can hire Oracle to train your team so you get trustful knowledge according to your specific needs. Certifications for the products are also available if your technical people desire to differentiate themselves as professionals. Red Hat on the other hand have a limited pool of resources to train your team in their technologies. Basically they are selling training and certification for RHEL ("Red Hat Enterprise Linux") but if you demand more specialized training in JBoss middleware, they will probably connect you to some "certified" partner localized training since they are apparently discontinuing their education center, at least here in Brazil. They were not able to reproduce their success with RHEL education to their middleware division since they need first sell the subscriptions to after gives you specialized training. And again, they only offer you specialized training based on their enterprise version (EAP in the case of JBoss) which means that the courses will be a quite outdated. There are reports of developers that took official training's from Red Hat at this year (2012) and in a certain JBoss advanced course, Red Hat supposedly covered JBossMQ as the messaging subsystem, and even the printed material provided was based on JBossMQ since the training was created for JBoss EAP 4.3. 12) Encouraging Transparency without Ulterior Motives - WebLogic Server 12c like any other software from Oracle can be downloaded any time from anywhere, you should only possess an OTN ("Oracle Technology Network") credential and you can download any enterprise software how many times you want. And is not some kind of "trial" version. It is the official binaries that will be running for ever in your data center. Oracle does not encourages the usage of "specific versions" of our software. The binaries you buy from Oracle are the same binaries anyone in the world could download and use for testing and personal education. JBoss EAP 6 on the other hand are not available for download unless you buy a subscription and get access to the Red Hat enterprise repositories. If you need to test, learn or just start creating your application using Red Hat's middleware software, you should download it from the community website. You are not allowed to download the enterprise version that, according to Red Hat are more secure, reliable and robust. But no one of us want to start the development of a software with an unsecured, unreliable and not scalable middleware right? So what you do? You are "invited" by Red Hat to buy subscriptions from them to get access to the "cool" version of the software. - WebLogic Server 12c prices are publicly available in the Oracle website. If you want to know right now how much WebLogic will cost to your organization, just click here and get access to our price list. In the case of WebLogic, check out the "US Oracle Technology Commercial Price List". Oracle also encourages you to get in touch with a sales representative to discuss discounts that would make possible the investment into our technology. But you are not required to do this, only if you are interested in buying our technology or maybe you want to discuss some discount scenarios. JBoss EAP 6 on the other hand does not have its cost publicly available in Red Hat's website or in any other media, at least is not so easy to get such information. The only link you will possibly find in their website is a "Contact a Sales Representative" link. This is not a very good relationship between an customer and an vendor. This is not an example of transparency, mainly when the software are sold as open. In this situations, customers expects to see the software prices publicly available, so they can have the chance to decide, based on the existing features of the software, if the cost is fair or not. Conclusion Oracle WebLogic is the most mature, secure, reliable and scalable Java EE application server of the market, and have a proven record of success around the globe to prove it's majority. Don't lose the chance to discover today how WebLogic could fit your needs and sustain your global IT middleware strategy, no matter if your strategy are completely based on the Cloud or not.

  Read the article

• What’s New from the Oracle Marketing Cloud at Oracle OpenWorld 2014?

  - by Richard Lefebvre

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Marketing—CX Central is your hub for all things Marketing related at OpenWorld in San Francisco, September 28-October 2, 2014. Learn how to personalize the modern marketing journey to improve customer loyalty. We’re hosting more than 60 breakout sessions, half of which will highlight customer success stories from marquee brands including Bizo, Comcast, Dell, Epson, John Deere, Lane Bryant, ReadyTalk and Shutterfly. Moscone West, Levels 2 and 3 To learn more about how modern marketing works, visit Moscone West, levels 2 and 3, for exciting demos of each of the Oracle Marketing Cloud solutions (BlueKai, Compendium, Eloqua, Push I/O, and Responsys). You also can check out our stations for Vertical Marketing Best Practices, the Markie Awards, and more! CX Spotlight Sessions “Accelerating Big Profits in Big Data,” Jeff Tanner, Baylor University “Using Content Marketing to Impact Every Stage of the Buyer’s Journey,” Jennifer Agustin, Bizo “Expanding Your Marketing with Proven Testing and Optimization,” Brian Border, Shutterfly and Matthew Balthazor, Epson “Modern Marketing: The New Digital Dialogue,” Cory Treffiletti, Oracle A Special Marquee Session Dell’s Hayden Mugford will speak on “The Digital Ecosystem: Driving Experience Through Contact Engagement.” She will highlight how the organization built a digital ecosystem that supports a behaviorally driven, multivehicle nurturing campaign. The Dell 1:1 Global Marketing team worked with multiple partners to innovate integrations with Oracle Eloqua, Oracle Real-Time Decisions for real-time decision logic, and a content management system (CMS) that enables 100 percent customized e-mails. The program doubled average order values for nurtured contacts versus non-nurtured and tripled open and click-through rates versus push e-mail. Other Oracle Marketing Cloud Session Highlights Thought leadership by role Exploring the benefits of moving to the Cloud Product line roadmaps and innovations in Marketing Technical deep dives for product lines within Marketing Best practices and impactful business measurements Solutions that are Integrated across CX Target Audience Session content is geared toward professionals in Marketing, Marketing Operations, Marketing Demand Generation, Social: Chief Marketing Officers, Vice Presidents, Directors and Managers. Outcomes Customers attending Marketing—CX Central @ OpenWorld will be able to: Gain insight into delivering consistent cross-channel marketing Discover how to provide the right information to the right customer at the right time and with the right channel Get answers to burning questions and advice on business challenges Hear from other Oracle customers about recommended best practices to help their organization move forward Network and share ideas to help create a strategy for connecting with customers in better ways It Wouldn’t Be an Oracle Marketing Cloud Event Without a Party! We’re hosting CX Central Fest:  a unique customer experience specifically designed for attendees of CX Central. It will include a chance to rock out at a private concert featuring Los Angeles indie electronic pop group, Capital Cities! Join us Tuesday, September 30 from 7-9 p.m. OpenWorld is a fabulous way for your customers to see all that Oracle Marketing Cloud has to offer. Pass on an invitation today. By Laura Vogel (Oracle) /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• SQLAuthority News – Tips for Traveling to Nepal

  - by pinaldave

  If you are a regular reader of this blog, you might know that I travel nearly 20+ days out of 30 days in a month. There are cases when I don’t have a chance to go home for an entire month and my family has to travel to different cities just to meet me. During my recent visit, one of my acquaintances suggested that I should blog about my travel experiences as well. This can be helpful to others who are traveling to the country or city. I have previously written about my experience about all the airlines in India. I would be writing about a few tips about traveling to the beautiful country Nepal today. Kathmandu, the capital of Nepal is very scenic. There are lots of historical places to see and visit. I was fortunate enough to stopover the Pashupatinath Temple, Bhaktapur, Vasantpur and the temple of Kumari Goddess. I also visited casinos there, but even if  I have stayed in Las Vegas for 3 and a half years before, I was not keen on them so I left the casinos just like what I did in Las Vegas . I also traveled to the famous Thamel area by car. Here are my quick tips for anyone who is planning to visit Nepal. They are not categorized but just written in the order that came to my mind. Please note that if you are an Indian, you will get a special privilege everywhere in Nepal, beginning right from the Indian airports. Use the expression “Nameste!” If you want to greet any Indian or Nepali. Indian Nationals do not need visa/passport to enter Nepal. In fact, Indian Nationals can just walk in to Nepal without any passport; but should have any valid Indian ID. There is no use of a passport since it will not be stamped at any immigration ports, whether in India or Nepal. Indian currency is widely accepted everywhere. However, please bring only Rs. 100 bills/notes as Rs. 500 or Rs. 1000 are not accepted. However, casinos there will accept larger bills. Indian National Language – Hindi is widely spoken and understood everywhere. I did not find a single person who had trouble speaking it. Nepali language uses the scripting language as Devnagari, which is similar to Hindi. Here, you will find food of almost every country.  The taste of Nepali food is authentic and very delicious. It is very safe to travel and move around in Kathmandu (despite what media suggests). However, it will really help if you have a friend who speaks Nepali. You can negotiate a few deals and cut off to almost 1/5 of the original quoted price of products sold here. If you are from Gujarat, India – you will find Nepali language sharing many common words. Temples are everywhere, so do not miss to visit a few of them. Pashupatinath is a must. Only followers of Hindu religion (from Nepal and India only) are allowed in most of the holy places. Camera is allowed everywhere except on the holy places. Now it is your turn to share your opinions or any suggestions. I think Nepal is a great country as there are lots of places to visit. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology

  Read the article

• NDepend tool – Why every developer working with Visual Studio.NET must try it!

  - by hajan

  In the past two months, I have had a chance to test the capabilities and features of the amazing NDepend tool designed to help you make your .NET code better, more beautiful and achieve high code quality. In other words, this tool will definitely help you harmonize your code. I mean, you’ve probably heard about Chaos Theory. Experienced developers and architects are already advocates of the programming chaos that happens when working with complex project architecture, the matrix of relationships between objects which simply even if you are the one who have written all that code, you know how hard is to visualize everything what does the code do. When the application get more and more complex, you will start missing a lot of details in your code… NDepend will help you visualize all the details on a clever way that will help you make smart moves to make your code better. The NDepend tool supports many features, such as: Code Query Language – which will help you write custom rules and query your own code! Imagine, you want to find all your methods which have more than 100 lines of code :)! That’s something simple! However, I will dig much deeper in one of my next blogs which I’m going to dedicate to the NDepend’s CQL (Code Query Language) Architecture Visualization – You are an architect and want to visualize your application’s architecture? I’m thinking how many architects will be really surprised from their architectures since NDepend shows your whole architecture showing each piece of it. NDepend will show you how your code is structured. It shows the architecture in graphs, but if you have very complex architecture, you can see it in Dependency Matrix which is more suited to display large architecture Code Metrics – Using NDepend’s panel, you can see the code base according to Code Metrics. You can do some additional filtering, like selecting the top code elements ordered by their current code metric value. You can use the CQL language for this purpose too. Smart Search – NDepend has great searching ability, which is again based on the CQL (Code Query Language). However, you have some options to search using dropdown lists and text boxes and it will generate the appropriate CQL code on fly. Moreover, you can modify the CQL code if you want it to fit some more advanced searching tasks. Compare Builds and Code Difference – NDepend will also help you compare previous versions of your code with the current one at one of the most clever ways I’ve seen till now. Create Custom Rules – using CQL you can create custom rules and let NDepend warn you on each build if you break a rule Reporting – NDepend can automatically generate reports with detailed stats, graph representation, dependency matrixes and some additional advanced reporting features that will simply explain you everything related to your application’s code, architecture and what you’ve done. And that’s not all. As I’ve seen, there are many other features that NDepend supports. I will dig more in the upcoming days and will blog more about it. The team who built the NDepend have also created good documentation, which you can find on the NDepend website. On their website, you can also find some good videos that will help you get started quite fast. It’s easy to install and what is very important it is fully integrated with Visual Studio. To get you started, you can watch the following Getting Started Online Demo and Tutorial with explanations and screenshots. If you are interested to know more about how to use the features of this tool, either visit their website or wait for my next blogs where I will show some real examples of using the tool and how it helps make your code better. And the last thing for this blog, I would like to copy one sentence from the NDepend’s home page which says: ‘Hence the software design becomes concrete, code reviews are effective, large refactoring are easy and evolution is mastered.’ Website: www.ndepend.com Getting Started: http://www.ndepend.com/GettingStarted.aspx Features: http://www.ndepend.com/Features.aspx Download: http://www.ndepend.com/NDependDownload.aspx Hope you like it! Please do let me know your feedback by providing comments to my blog post. Kind Regards, Hajan

  Read the article

• Blogging: MacJournal & Windows Live Writer

  - by Jeff Julian

  One thing I have learned about using a Mac is that Apple does not produce very many free applications. The ones they do are typically not full featured and to get the full feature you need to buy their upgraded version. For example, when it comes to Photo editing and cataloging, iPhoto is not a solution for large files or RAW processing, you need Aperture which is a couple hundred dollars. I am not complaining because I like it when an application has a product team who generates revenue with it, because the chance of them being around longer seems to be higher. What is my point in all of this? Apple does not produce a product for blogging/journaling like Microsoft does with Windows Live Writer. I love Windows Live Writer. If you are on a Windows box, it is a required tool in your toolbox if you publish to a blog. The cleanness of the interface, integration with most blog APIs and ability to Save Local or Publish as a Draft make capturing your thoughts for publishing now or later a very easy task. My hope is that Microsoft will port it to the Mac, but I don’t believe that will ever happen as it is not a revenue generating product and Microsoft doesn’t often port to a Mac besides Remote Desktop Connection and MSN Messenger. For my configuration I used to use only Boot Camp on my two MacBook Pros I have owned in the past three years because I’m a PC, but after four different rebuilds (not typically due to Windows, but Boot Camp or Parallels) I decided to move off the Boot Camp platform and to VMWare Fusion. This is a complete separate blog post that I should spec out in MacJournal, but I now always boot into the Mac OS and use Fusion for my AJI Software VM or my client’s VMs. It just seems to work better for me and I have a very nice way to backup my Windows environments with VMWare.Needless to say, there was need in my new laptop configuration for a blogging tool that worked natively on a Mac. I don’t like to power up my machine for writing a document or working on an image and need to boot up a VM just so I can use Windows. Some would say why not just use a Windows laptop and put the MBP on eBay? It is just a preference and right now, I like the Mac OS for day to day work. So in comes MacJournal, part of the current MacHeist package for $19.95 (MacJournal is normally $39.95). This product is definitely not WLW, but WLW is missing some features I like in MacJournal. I hope the price point comes down on MacJournal cause I could see paying $19.95 for it, but it is always hard for me to buy a piece of software for $39.95 when I can use something else. But I am a cheapskate when it comes to software packages. I suggest if you are using a Mac to drop what you are doing pick up the MacHeist bundle today before it is over, but if you are reading this later, than download the trial and see if MacJournal is a solution for you. If you have any other suggestions that are as nice or cheaper, please comment.Product LinksMacJournal by Mariners Software $39.95 (part of MacHeist bundle for $19.95 with only one day left)Windows Live Writer by MicrosoftThis post was created using MacJournal.[Update: The joys of formatting. Make sure if you are a Geekswithblogs.net member that you use this configuration to setup the Metablog formatting of paragraphs correctly]

  Read the article

• Catch Oracle Today and Tomorrow at Forrester’s Customer Experience Forum 2012 East

  - by Christie Flanagan

  Continuing our coverage of the customer experience revolution this week, don’t miss a chance to catch up with Oracle at Forrester’s Customer Experience Forum 2012 East today and tomorrow in New York City. The theme for this year’s Forum is “Outside In: The Power Of Putting Customers At The Center Of Your Business” and will take a look at important questions surrounding how to transform your company in order to take best advantage of the customer experience revolution: Why is customer experience the greatest untapped source of cost savings and increased revenue today? What is the key to understanding and taking control of your customer experience ecosystem? What are the six essential customer experience disciplines? Which companies have adopted best-in-class customer experience practices? How do customer experience strategies drive differentiating activities and processes at top companies? Which organizations appoint a chief customer officer to lead their customer experience efforts? What is the future of customer experience? How can you design an enterprise wide customer experience? How can you measure the results of your customer experience efforts? As a gold sponsor of the event, there will be a numbers of ways to interact with Oracle while you’re attending the Forum.  Here are some of the highlights:Oracle Speaking SessionTuesday, June 26, 2:10pm – 2:40pmThe Customer And YOU — Today’s Winners Are Defined By Customer ExperienceAnthony Lye, Senior Vice President of Customer Relationship Management, OracleCome hear Anthony Lye, Senior Vice President of Customer Relationship Management at Oracle, explain how leading companies are investing in customer experience solutions to enrich all interactions between a customer and their company. He will discuss Oracle's vision for transforming your customer engagement, insight, and execution into a connected, personalized, and rewarding experience across all touchpoints and interactions. He will demonstrate how great customer experiences generate real business results by attracting more customers, retaining more customers, and generating more sales while improving operational efficiency.Solution ShowcaseTuesday, June 26th9:45am - 10:30am - Morning Networking Break in the Solutions Showcase11:45am – 1:15pm - Networking Lunch an Dessert in the Solutions Showcase2:40pm – 3:25pm - Afternoon Break in the Solutions Showcase5:30pm – 7:00pm - Networking Reception in the Solutions ShowcaseWednesday, June 27th9:45am - 10:30am - Morning Networking Break in the Solutions Showcase12:20pm -1:20pm - Networking Lunch and Dessert in the Solutions ShowcaseWe hope to see you there! Webcast: Learn How Ancestry.com Delivers Exceptional Online Customer Experience with Oracle WebCenterDate: Thursday, June 28, 2012Time: 10:00 AM PDT/ 1:00 PM EDT Ancestry.com is the world’s largest online family history resource, providing an engaging customer experience to more than 1.7 million members. With a wealth of learning resources and a worldwide community of family history enthusiasts, Ancestry.com helps people discover their roots and tell their family stories. Key to Ancestry.com’s success has been the delivery of an online customer experience that converts site visitors into paying subscribers and keeps them coming back. Register now to learn how Ancestry.com delivers an exception customer experience using Oracle WebCenter Sites. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Raspberry Pi entrance signed backed by Umbraco - Part 1

  - by Chris Houston

  Being experts on all things Umbraco, we jumped at the chance to help our client, QV Offices, with their pressing signage predicament. They needed to display a sign in the entrance to their building and approached us for our advice. Of course it had to be electronic: displaying multiple names of their serviced office clients, meeting room bookings and on-the-pulse promotions. But with a winding Victorian staircase and minimal storage space how could the monitor be run, updated and managed? That’s where we came in…Raspberry PiUmbraco CMSAutomatic updatesAutomated monitor of the signPower saving when the screen is not in useMounting the screenThe screen that has been used is a standard LED low energy Full HD screen and has been mounted on the wall using it's VESA mounting points, as the wall is a stud wall we were able to add an access panel behind the screen to feed through the mains, HDMI and sensor cables.The Raspberry Pi is then tucked away out of sight in the main electrical cupboard which just happens to be next to the sign, we had an electrician add a power point inside this cupboard to allow us to power the screen and the Raspberry Pi.Designing the interface and editing the contentAlthough a room sign was the initial requirement from QV Offices, their medium term goal has always been to add online meeting booking to their website and hence we suggested adding information about the current and next day's meetings to the sign that would be pulled directly from their online booking system.We produced the design and built the web page to fit exactly on a 1920 x 1080 screen (Full HD in Portrait)As you would expect all the information can be edited via an Umbraco CMS, they are able to add floors, rooms, clients and virtual clients as well as add meeting bookings to their meeting diary.How we configured the Raspberry PiAfter receiving a new Raspberry Pi we downloaded the latest release of Raspbian operating system and followed the official guide which shows how to copy the OS onto an SD card from a Mac, we then followed the majority of steps on this useful guide: 10 Things to Do After Buying a Raspberry Pi.Installing ChromiumWe chose to use the Chromium web browser which for those who do not know is the open sourced version of Google Chrome. You can install this from the terminal with the following command:sudo apt-get install chromium-browserInstalling UnclutterWe found this little application which automatically hides the mouse pointer, it is used in the script below and is installed using the following command:sudo apt-get install unclutterAuto start Chromium and disabling the screen saver, power saving and mouseWhen the Raspberry Pi has been installed it will not have a keyboard or mouse and hence if their was a power cut we needed it to always boot and re-loaded Chromium with the correct URL.Our preferred command line text editor is Nano and I have assumed you know how to use this editor or will be able to work it out pretty quickly.So using the following command:sudo nano /etc/xdg/lxsession/LXDE/autostartWe then changed the autostart file content to:@lxpanel --profile LXDE@pcmanfm --desktop --profile LXDE@xscreensaver -no-splash@xset s off@xset -dpms@xset s noblank@chromium --kiosk --incognito http://www.qvoffices.com/someURL@unclutter -idle 0The first few commands turn off the screen saver and power saving, we then open Cromium in Kiosk Mode (full screen with no menu etc) and pass in the URL to use (I have changed the URL in this example) We found a useful blog post with the Cromium command line switches.Finally we also open an application called Unclutter which auto hides the mouse after 0 seconds, so you will never see a mouse on the sign.We also had to edit the following file:sudo nano /etc/lightdm/lightdm.confAnd added the following line under the [SeatDefault] section:xserver-command=X -s 0 dpmsRefreshing the screenWe decided to try and add a scheduled task that would trigger Chromium to reload the page, at some point in the future we might well change this to using Javascript to update the content, but for now this works fine.First we installed the XDOTool which enables you to script Keyboard commands:sudo apt-get install xdotoolWe used the Refreshing Chromium Browser by Shell Script post as a reference and created the following shell script (which we called refreshing.sh):export DISPLAY=":0"WID=$(xdotool search --onlyvisible --class chromium|head -1)xdotool windowactivate ${WID}xdotool key ctrl+F5This selects the correct display and then sends a CTRL + F5 to refresh Chromium.You will need to give this file execute permissions:chmod a=rwx refreshing.shNow we have the script file setup we just need to schedule it to call this script periodically which is done by using Crontab, to edit this you use the following command:crontab -eAnd we added the following:*/5 * * * * DISPLAY=":.0" /home/pi/scripts/refreshing.sh >/home/pi/cronlog.log 2>&1This calls our script every 5 minutes to refresh the display and it logs any errors to the cronlog.log file.SummaryQV Offices now have a richer and more manageable booking system than they did before we started, and a great new sign to boot.How could we make sure that the sign was running smoothly downstairs in a busy office centre? A second post will follow outlining exactly how Vizioz enabled QV Offices to monitor their sign simply and remotely, from the comfort of their desks.

  Read the article

• POP Forums v9 Beta 1 for ASP.NET MVC 3 posted to CodePlex!

  - by Jeff

  As promised, I posted a beta build of my forum app for ASP.NET MVC 3. Get the new goodies here: http://popforums.codeplex.com/releases/view/58228 This is the first beta for the ASP.NET MVC 3 version of POP Forums. It is nearly feature complete, and ready for testing and feedback. For previous release notes, look here, here and here.Check out the live preview: http://preview.popforums.com/ForumsSetup instructions are on the home page of this project. The new hotness in the beta, or what has been done since the last preview: All views converted to use Razor E-mail subscription/notification of new posts New post indicators/mark read buttons Permalinks to posts Jump to newest post (from new post indicators) Recent topics Favorite topics Moderator functions for topics (pin/close/delete, plus move and rename) Search, ported from v8. Not a ton of optimization here, or new unit testing, but the old version worked pretty well User posts (topics the user posted in) Forgot password Vanity items (signatures and avatars) Hide vanity items per user preference Some minor data caching where appropriate A little bit of UI refinement Lots-o-bug fixes Lots-o-unit tests What's next? The plan between now and the next beta is as follows: Continue working through features/tasks, and fix bugs as they're reported Integrate the forum into a real, production site Refine the UI Refactor as much as possible... the code organization is not entirely logical in some places After the second beta, a release candidate will follow, with a real "final" release after that. Subsequent releases should come relatively frequently and without a lot of risk. The trick in building this thing has been that it mostly tossed the previous WebForms version, which was all full of crusties. The time table for this is a little harder to pin down, as day jobs and families will have their effect. Other notes Refactoring will be a priority. As the features of MVC have evolved, so have my desires to use it in a fashion that makes things clear and easy to follow. I don't even know if anyone will ever start mucking around in the code, but on the off chance they do, I'd like what they find to not suck. Other nice-to-haves are builds to target Windows Azure and SQL CE. A nice setup UI would be super too. I think the ASP.NET MVC world has gone long enough without a decent forum.The biggest challenge that I've found is making the forum something that can be dropped in any app. While it does rope its views into an area, areas are mostly just routing details. I haven't thought of a clever way yet to limit dependency injection, for example, to just the forum bits. I mean, everyone should be using Ninject, but how realistic is that? ;)How much time and effort should you spend on POP Forums in its current state? Change is inevitable, but at this point I'm reasonably committed to not changing the database schema. I really think it will stay as-is. All bets are off for the various interfaces throughout the app, but the data should generally resist change. It's not even that different from v8, which was one of the original goals because I didn't want to rewrite SQL or introduce a new ORM or whatever. My point is that if you wanted to build a site around this today, even though it's not entirely functional, I think it's low risk in terms of data loss. I can't vouch for whether or not you know what you're doing.I've been having some chats with people lately about quoting posts, and honestly there has to be something better and straight forward. That continues to be a holy grail of mine, and some day, I hope to find it.Enjoy... it's starting to feel more real every day!

  Read the article

• Making a Job Change That's Easy Why Not Try a Career Change

  - by david.talamelli

  A few nights ago I received a comment on one of our blog posts that reminded me of a statistic that I heard a while back. The statistic reflected the change in our views towards work and showed how while people in past generations would stay in one role for their working career - now with so much choice people not only change jobs often but also change careers 4-5 times in their working life. To differentiate between a job change and a career change: when I say job change this could be an IT Sales person moving from one IT Sales role to another IT Sales role. A Career change for example would be that same IT Sales person moving from IT Sales to something outside the scope of their industry - maybe to something like an Engineer or Scuba Dive Instructor. The reason for Career changes can be as varied as the people who make them. Someone's motivation could be to pursue a passion or maybe there is a change in their personal circumstances forcing the change or it could be any other number of reasons. I think it takes courage to make a Career change - it can be easy to stay in your comfort zone and do what you know, but to really push yourself sometimes you need to try something new, it is a matter of making that career transition as smooth as possible for yourself. The comment that was posted is here below (thanks Dean for the kind words they are appreciated). Hi David, I just wanted to let you know that I work for a company called Milestone Search in Melbourne, Victoria Australia. (www.mstone.com.au) We subscribe to your feed on a daily basis and find your blogs both interesting and insightful. Not to mention extremely entertaining. I wonder if you have missed out on getting in journalism as this seems to be something you'd be great at ?: ) Anyways back to my point about changing careers. This could be anything from going from I.T. to Journalism, Engineering to Teaching or any combination of career you can think of. I don't think there ever has been a time where we have had so many opportunities to do so many different things in our working life. While this idea sounds great in theory, putting it into practice would be much harder to do I think. First, in an increasingly competitive job market, employers tend to look for specialists in their field. You may want to make a change but your options may be limited by the number of employers willing to take a chance on someone new to an industry that will likely require a significant investment in time to get brought up to speed. Also, using myself as an example if I was given the opportunity to move into Journalism/Communication/Marketing career from my career as an IT Recruiter - realistically I would have to take a significant pay cut to make this change as my current salary reflects the expertise I have in my current career. I would not immediately be up to speed moving into a new career and would not be able to justify a similar salary. Yes there are transferable skills in any career change, but even though you may have transferable skills you must realise that you will also have a large amount of learning to do which would take time. These are two initial hurdles that I immediately think of, there may be more but nothing is insurmountable. If you work out what you want to do with your working career whatever that may be, you then need to just need to work out the steps to get to your end goal. This is where utilising the power of your networks and using Social Media can come in handy. If you are interested in working somewhere why not proactively take the opportunity to research the industry or company - find out who it is you need to speak to and get in touch with them. We spend so much time working, we should enjoy the work we do and not be afraid to try new things. Waiting for your dream job to fall into your lap or be handed to you on a silver platter is not likely going to happen, so if there is something you do want to do, work out a plan to make it happen and chase after it. This article was originally posted on David Talamelli's Blog - David's Journal on Tap

  Read the article

• Want a headless build server for SSDT without installing Visual Studio? You’re out of luck!

  - by jamiet

  An issue that regularly seems to rear its head on my travels is that of headless build servers for SSDT. What does that mean exactly? Let me give you my interpretation of it. A SQL Server Data Tools (SSDT) project incorporates a build process that will basically parse all of the files within the project and spit out a .dacpac file. Where an organisation employs a Continuous Integration process they will likely want to automate the building of that dacpac whenever someone commits a change to the source control repository. In order to do that the organisation will use a build server (e.g. TFS, TeamCity, Jenkins) and hence that build server requires all the pre-requisite software that understands how to build an SSDT project. The simplest way to install all of those pre-requisites is to install SSDT itself however a lot of folks don’t like that approach because it installs a lot unnecessary components on there, not least Visual Studio itself. Those folks (of which i am one) are of the opinion that it should be unnecessary to install a heavyweight GUI in order to simply get a few software components required to do something that inherently doesn’t even need a GUI. The phrase “headless build server” is often used to describe a build server that doesn’t contain any heavyweight GUI tools such as Visual Studio and is a desirable state for a build server. In his blog post Headless MSBuild Support for SSDT (*.sqlproj) Projects Gert Drapers outlines the steps necessary to obtain a headless build server for SSDT: This article describes how to install the required components to build and publish SQL Server Data Tools projects (*.sqlproj) using MSBuild without installing the full SQL Server Data Tool hosted inside the Visual Studio IDE. http://sqlproj.com/index.php/2012/03/headless-msbuild-support-for-ssdt-sqlproj-projects/ Frankly however going through these steps is a royal PITA and folks like myself have longed for Microsoft to support headless build support for SSDT by providing a distributable installer that installs only the pre-requisites for building SSDT projects. Yesterday in MSDN forum thread Building a VS2013 headless build server - it's sooo hard Mike Hingley complained about this very thing and it prompted a response from Kevin Cunnane from the SSDT product team: The official recommendation from the TFS / Visual Studio team is to install the version of Visual Studio you use on the build machine. I, like many others, would rather not have to install full blown Visual Studio and so I asked: Is there any chance you'll ever support any of these scenarios: Installation of all build/deploy pre-requisites without installing the VS shell? TFS shipping with all of the pre-requisites for doing SSDT project build/deploys 3rd party build servers (e.g. TeamCity) shipping with all of the requisites for doing SSDT project build/deploys I have to say that the lack of a single installer containing all the pre-requisites for SSDT build/deploy puzzles me. Surely the DacFX installer would be a perfect vehicle for that? Kevin replied again: The answer is no for all 3 scenarios. We looked into this issue, discussed it with the Visual Studio / TFS team, and in the end agreed to go with their latest guidance which is to install Visual Studio (e.g. VS2013 Express for Web) on the build machine. This is how Visual Studio Online is doing it and it's the approach recommended for customers setting up their own TFS build servers. I would hope this is compatible with 3rd party build servers but have not verified whether this works with TeamCity etc. Note that DacFx MSI isn't a suitable release vehicle for this as we don't want to include Visual Studio/MSBuild dependencies in that package. It's meant to just include the core DacFx DLLs used by SSMS, SqlPackage.exe on the command line, etc. What this means is we won't be providing a separate MSI installer or nuget package with just the necessary build DLLs you need to run your build and tests. If someone wanted to create a script that generated a nuget package based on our DLLs and targets files, then release that somewhere on the web for easier integration with 3rd party build servers we've no problem with that. Again, here’s the link to the thread and its worth reading in its entirety if this is something that interests you. So there you have it. Microsoft will not be be providing support for headless build servers for SSDT but if someone in the community wants to go ahead and roll their own, go right ahead. @Jamiet

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >