Search Results

Search found 1500 results on 60 pages for 'codeplex'.

Page 60/60 | < Previous Page | 56 57 58 59 60 

  • Enum driving a Visual State change via the ViewModel

    - by Chris Skardon
    Exciting title eh? So, here’s the problem, I want to use my ViewModel to drive my Visual State, I’ve used the ‘DataStateBehavior’ before, but the trouble with it is that it only works for bool values, and the minute you jump to more than 2 Visual States, you’re kind of screwed. A quick search has shown up a couple of points of interest, first, the DataStateSwitchBehavior, which is part of the Expression Samples (on Codeplex), and also available via Pete Blois’ blog. The second interest is to use a DataTrigger with GoToStateAction (from the Silverlight forums). So, onwards… first let’s create a basic switch Visual State, so, a DataObj with one property: IsAce… public class DataObj : NotifyPropertyChanger { private bool _isAce; public bool IsAce { get { return _isAce; } set { _isAce = value; RaisePropertyChanged("IsAce"); } } } The ‘NotifyPropertyChanger’ is literally a base class with RaisePropertyChanged, implementing INotifyPropertyChanged. OK, so we then create a ViewModel: public class MainPageViewModel : NotifyPropertyChanger { private DataObj _dataObj; public MainPageViewModel() { DataObj = new DataObj {IsAce = true}; ChangeAcenessCommand = new RelayCommand(() => DataObj.IsAce = !DataObj.IsAce); } public ICommand ChangeAcenessCommand { get; private set; } public DataObj DataObj { get { return _dataObj; } set { _dataObj = value; RaisePropertyChanged("DataObj"); } } } Aaaand finally – hook it all up to the XAML, which is a very simple UI: A Rectangle, a TextBlock and a Button. The Button is hooked up to ChangeAcenessCommand, the TextBlock is bound to the ‘DataObj.IsAce’ property and the Rectangle has 2 visual states: IsAce and NotAce. To make the Rectangle change it’s visual state I’ve used a DataStateBehavior inside the Layout Root Grid: <i:Interaction.Behaviors> <ei:DataStateBehavior Binding="{Binding DataObj.IsAce}" Value="true" TrueState="IsAce" FalseState="NotAce"/> </i:Interaction.Behaviors> So now we have the button changing the ‘IsAce’ property and giving us the other visual state: Great! So – the next stage is to get that to work inside a DataTemplate… Which (thankfully) is easy money. All we do is add a ListBox to the View and an ObservableCollection to the ViewModel. Well – ok, a little bit more than that. Once we’ve got the ListBox with it’s ItemsSource property set, it’s time to add the DataTemplate itself. Again, this isn’t exactly taxing, and is purely going to be a Grid with a Textblock and a Rectangle (again, I’m nothing if not consistent). Though, to be a little jazzy I’ve swapped the rectangle to the other side (living the dream). So, all that’s left is to add some States to the template.. (Yes – you can do that), these can be the same names as the others, or indeed, something else, I have chosen to stick with the same names and take the extra confusion hit right on the nose. Once again, I add the DataStateBehavior to the root Grid element: <i:Interaction.Behaviors> <ei:DataStateBehavior Binding="{Binding IsAce}" Value="true" TrueState="IsAce" FalseState="NotAce"/> </i:Interaction.Behaviors> The key difference here is the ‘Binding’ attribute, where I’m now binding to the IsAce property directly, and boom! It’s all gravy!   So far, so good. We can use boolean values to change the visual states, and (crucially) it works in a DataTemplate, bingo! Now. Onwards to the Enum part of this (finally!). Obviously we can’t use the DataStateBehavior, it' only gives us true/false options. So, let’s give the GoToStateAction a go. Now, I warn you, things get a bit complex from here, instead of a bool with 2 values, I’m gonna max it out and bring in an Enum with 3 (count ‘em) 3 values: Red, Amber and Green (those of you with exceptionally sharp minds will be reminded of traffic lights). We’re gonna have a rectangle which also has 3 visual states – cunningly called ‘Red’, ‘Amber’ and ‘Green’. A new class called DataObj2: public class DataObj2 : NotifyPropertyChanger { private Status _statusValue; public DataObj2(Status status) { StatusValue = status; } public Status StatusValue { get { return _statusValue; } set { _statusValue = value; RaisePropertyChanged("StatusValue"); } } } Where ‘Status’ is my enum. Good times are here! Ok, so let’s get to the beefy stuff. So, we’ll start off in the same manner as the last time, we will have a single DataObj2 instance available to the Page and bind to that. Let’s add some Triggers (these are in the LayoutRoot again). <i:Interaction.Triggers> <ei:DataTrigger Binding="{Binding DataObject2.StatusValue}" Value="Amber"> <ei:GoToStateAction StateName="Amber" UseTransitions="False" /> </ei:DataTrigger> <ei:DataTrigger Binding="{Binding DataObject2.StatusValue}" Value="Green"> <ei:GoToStateAction StateName="Green" UseTransitions="False" /> </ei:DataTrigger> <ei:DataTrigger Binding="{Binding DataObject2.StatusValue}" Value="Red"> <ei:GoToStateAction StateName="Red" UseTransitions="False" /> </ei:DataTrigger> </i:Interaction.Triggers> So what we’re saying here is that when the DataObject2.StatusValue is equal to ‘Red’ then we’ll go to the ‘Red’ state. Same deal for Green and Amber (but you knew that already). Hook it all up and start teh project. Hmm. Just grey. Not what I wanted. Ok, let’s add a ‘ChangeStatusCommand’, hook that up to a button and give it a whirl: Right, so the DataTrigger isn’t picking up the data on load. On the plus side, changing the status is making the visual states change. So. We’ll cross the ‘Grey’ hurdle in a bit, what about doing the same in the DataTemplate? <Codey Codey/> Grey again, but if we press the button: (I should mention, pressing the button sets the StatusValue property on the DataObj2 being represented to the next colour). Right. Let’s look at this ‘Grey’ issue. First ‘fix’ (and I use the term ‘fix’ in a very loose way): The Dispatcher Fix This involves using the Dispatcher on the View to call something like ‘RefreshProperties’ on the ViewModel, which will in turn raise all the appropriate ‘PropertyChanged’ events on the data objects being represented. So, here goes, into turdcode-ville – population – me: First, add the ‘RefreshProperties’ method to the DataObj2: internal void RefreshProperties() { RaisePropertyChanged("StatusValue"); } (shudder) Now, add it to the hosting ViewModel: public void RefreshProperties() { DataObject2.RefreshProperties(); if (DataObjects != null && DataObjects.Count > 0) { foreach (DataObj2 dataObject in DataObjects) dataObject.RefreshProperties(); } } (double shudder) and now for the cream on the cake, adding the following line to the code behind of the View: Dispatcher.BeginInvoke(() => ((MoreVisualStatesViewModel)DataContext).RefreshProperties()); So, what does this *ahem* code give us: Awesome, it makes the single bound data object show the colour, but frankly ignores the DataTemplate items. This (by the way) is the same output you get from: Dispatcher.BeginInvoke(() => ((MoreVisualStatesViewModel)DataContext).ChangeStatusCommand.Execute(null)); So… Where does that leave me? What about adding a button to the Page to refresh the properties – maybe it’s a timer thing? Yes, that works. Right, what about using the Loaded event then eh? Loaded += (s, e) => ((MoreVisualStatesViewModel) DataContext).RefreshProperties(); Ahhh No. What about converting the DataTemplate into a UserControl? Anything is worth a shot.. Though – I still suspect I’m going to have to ‘RefreshProperties’ if I want the rectangles to update. Still. No. This DataTemplate DataTrigger binding is becoming a bit of a pain… I can’t add a ‘refresh’ button to the actual code base, it’s not exactly user friendly. I’m going to end this one now, and put some investigating into the use of the DataStateSwitchBehavior (all the ones I’ve found, well, all 2 of them are working in SL3, but not 4…)

    Read the article

  • Enabling XML-documentation for code contracts

    - by DigiMortal
    One nice feature that code contracts offer is updating of code documentation. If you are using source code documenting features of Visual Studio then code contracts may automate some tasks you otherwise have to implement manually. In this posting I will show you some XML documentation files with documented contracts. I will also explain how this feature works. Enabling XML-documentation in project settings As a first thing let’s enable generating of code documentation under project settings. Open project properties, move to Build page and make check to checkbox called “XML documentation file”. Save project settings and rebuild project. When project is built go to bin/Debug folder and open the XML-file. Here is my XML. <?xml version="1.0"?> <doc>     <assembly>         <name>Eneta.Examples.CodeContracts.Testable</name>     </assembly>     <members>         <member name="T:Eneta.Examples.CodeContracts.Testable.Randomizer">             <summary>             Class for generating random integers in user specified range.             </summary>         </member>         <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.#ctor(Eneta.Examples.CodeContracts.Testable.IRandomGenerator)">             <summary>             Constructor of Randomizer. Initializes Randomizer class.             </summary>             <param name="generator">Instance of random number generator.</param>         </member>         <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.GetRandomFromRangeContracted(System.Int32,System.Int32)">             <summary>             Returns random integer in given range.             </summary>             <param name="min">Minimum value of random integer.</param>             <param name="max">Maximum value of random integer.</param>         </member>     </members> </doc> You can see nothing about code contracts here. Enabling code contracts documentation Code contracts have their own settings and conditions for documentation. Open project properties and move to Code Contracts tab. From “Contract Reference Assembly” dropdown check Build and make check to checkbox “Emit contracts into XML doc file”. And again – save project setting, build the project and move to bin/Debug folder. Now you can see that there are two files for XML-documentation: <assembly name>.XML <assembly name>.old.XML First files is documentation with contracts, second file is original documentation without contracts. Let’s see now what is inside our new XML-documentation file. <?xml version="1.0"?> <doc>   <assembly>     <name>Eneta.Examples.CodeContracts.Testable</name>   </assembly>   <members>     <member name="T:Eneta.Examples.CodeContracts.Testable.Randomizer">       <summary>             Class for generating random integers in user specified range.             </summary>     </member>     <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.#ctor(Eneta.Examples.CodeContracts.Testable.IRandomGenerator)">       <summary>             Constructor of Randomizer. Initializes Randomizer class.             </summary>       <param name="generator">Instance of random number generator.</param>     </member>     <member name="M:Eneta.Examples.CodeContracts.Testable.Randomizer.GetRandomFromRangeContracted(System.Int32,System.Int32)">       <summary>             Returns random integer in given range.             </summary>       <param name="min">Minimum value of random integer.</param>       <param name="max">Maximum value of random integer.</param>       <requires description="Min must be less than max" exception="T:System.ArgumentOutOfRangeException">                 min &lt; max</requires>       <exception cref="T:System.ArgumentOutOfRangeException">                 min &gt;= max</exception>       <ensures description="Return value is out of range">                 Contract.Result&lt;int&gt;() &gt;= min &amp;&amp;                 Contract.Result&lt;int&gt;() &lt;= max</ensures>     </member>   </members> </doc> As you can see then code contracts are pretty well documented. Messages that I provided with code contracts are also available in documentation. If I wrote very good and informative messages then these messages are very useful also in contracts documentation. Code contracts and Sandcastle Sandcastle knows nothing about code contracts by default. There is separate package of file for Sandcastle that is provided you by code contracts installation. You can read from code contracts manual: “Sandcastle (http://www.codeplex.com/Sandcastle) is a freely available tool that generates help les and web sites describing your APIs, based on the XML doc comments in your source code. The CodeContracts install contains a set of les that can be copied over a Sandcastle installation to take advantage of the additional contract information. The produced documentation adds a contract section to methods with declared requires and/or ensures. In order for Sandcastle to produce Contract sections, you need to patch a number of files in its installation. Please refer to the Sandcastle Readme.txt found under Start Menu/CodeContracts/Sandcastle for instructions. A future release of Sandcastle will hopefully support contract sections without the need for this patching step.” Integrating code contracts documentation to Sandcastle will be one of my next postings about code contracts. Conclusion if you are using code documentation then documentation about code contracts can be added to documentation very easily. All you have to do is to enable XML-documentation for contracts and build your project. Later you can use Sandcastle files provided by code contracts installer to integrate contracts documentation to your output documentation package.

    Read the article

  • Building Publishing Pages in Code

    - by David Jacobus
    Originally posted on: http://geekswithblogs.net/djacobus/archive/2013/10/27/154478.aspxOne of the Mantras we developers try to follow: Ensure that the solution package we deliver to the client is complete.  We build Web Parts, Master Pages, Images, CSS files and other artifacts that we push to the client with a WSP (Solution Package) And then we have them finish the solution by building their site pages by adding the web parts to the site pages.       I am a proponent that we,  the developers,  should minimize this time consuming work and build these site pages in code.  I found a few blogs and some MSDN documentation but not really a complete solution that has all these artifacts working in one solution.   What I am will discuss and provide a solution for is a package that has: 1.  Master Page 2.  Page Layout 3.  Page Web Parts 4.  Site Pages   Most all done in code without the development team or the developers having to finish up the site building process spending a few hours or days completing the site!  I am not implying that in Development we do this. In fact,  we build these pages incrementally testing our web parts, etc. I am saying that the final action in our solution is that we take all these artifacts and add them to the site pages in code, the client then only needs to activate a few features and VIOLA their site appears!.  I had a project that had me build 8 pages like this as part of the solution.   In this blog post, I am taking a master page solution that I have called DJGreenMaster.  On My Office 365 Development Site it looks like this:     It is a generic master page for a SharePoint 2010 site Along with a three column layout.  Centered with a footer that uses a SharePoint List and Web Part for the footer links.  I use this master page a lot in my site development!  Easy to change the color and site logo with a little CSS.   I am going to add a few web parts for discussion purposes and then add these web parts to a site page in code.    Lets look at the solution package for DJ Green Master as that will be the basis project for building the site pages:   What you are seeing  is a complete solution to add a Master Page to a site collection which contains: 1.  Master Page Module which contains the Master Page and Page Layout 2.  The Footer Module to add the Footer Web Part 3.  Miscellaneous modules to add images, JQuery, CSS and subsite page 4.  3 features and two feature event receivers: a.  DJGreenCSS, used to add the master page CSS file to Style Sheet Library and an Event Receiver to check it in. b.  DJGreenMaster used to add the Master Page and Page Layout.  In an Event Receiver change the master page to DJGreenMaster , create the footer list and check the files in. c.  DJGreenMasterWebParts add the Footer Web Part to the site collection. I won’t go over the code for this as I will give it to you at the end of this blog post. I have discussed creating a list in code in a previous post.  So what we have is the basis to begin what is germane to this discussion.  I have the first two requirements completed.  I need now to add page web parts and the build the pages in code.  For the page web parts, I will use one downloaded from Codeplex which does not use a SharePoint custom list for simplicity:   Weather Web Part and another downloaded from MSDN which is a SharePoint Custom Calendar Web Part, I had to add some functionality to make the events color coded to exceed the built-in 10 overlays using JQuery!    Here is the solution with the added projects:     Here is a screen shot of the Weather Web Part Deployed:   Here is a screen shot of the Site Calendar with JQuery:     Okay, Now we get to the final item:  To create Publishing pages.   We need to add a feature receiver to the DJGreenMaster project I will name it DJSitePages and also add a Event Receiver:       We will build the page at the site collection level and all of the code necessary will be contained in the event receiver.   Added a reference to the Microsoft.SharePoint.Publishing.dll contained in the ISAPI folder of the 14 Hive.   First we will add some static methods from which we will call  in our Event Receiver:   1: private static void checkOut(string pagename, PublishingPage p) 2: { 3: if (p.Name.Equals(pagename, StringComparison.InvariantCultureIgnoreCase)) 4: { 5: 6: if (p.ListItem.File.CheckOutType == SPFile.SPCheckOutType.None) 7: { 8: p.CheckOut(); 9: } 10:   11: if (p.ListItem.File.CheckOutType == SPFile.SPCheckOutType.Online) 12: { 13: p.CheckIn("initial"); 14: p.CheckOut(); 15: } 16: } 17: } 18: private static void checkin(PublishingPage p,PublishingWeb pw) 19: { 20: SPFile publishFile = p.ListItem.File; 21:   22: if (publishFile.CheckOutType != SPFile.SPCheckOutType.None) 23: { 24:   25: publishFile.CheckIn( 26:   27: "CheckedIn"); 28:   29: publishFile.Publish( 30:   31: "published"); 32: } 33: // In case of content approval, approve the file need to add 34: //pulishing site 35: if (pw.PagesList.EnableModeration) 36: { 37: publishFile.Approve("Initial"); 38: } 39: publishFile.Update(); 40: }   In a Publishing Site, CheckIn and CheckOut  are required when dealing with pages in a publishing site.  Okay lets look at the Feature Activated Event Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3:   4:   5:   6: object oParent = properties.Feature.Parent; 7:   8:   9:   10: if (properties.Feature.Parent is SPWeb) 11: { 12:   13: currentWeb = (SPWeb)oParent; 14:   15: currentSite = currentWeb.Site; 16:   17: } 18:   19: else 20: { 21:   22: currentSite = (SPSite)oParent; 23:   24: currentWeb = currentSite.RootWeb; 25:   26: } 27: 28:   29: //create the publishing pages 30: CreatePublishingPage(currentWeb, "Home.aspx", "ThreeColumnLayout.aspx","Home"); 31: //CreatePublishingPage(currentWeb, "Dummy.aspx", "ThreeColumnLayout.aspx","Dummy"); 32: }     Basically we are calling the method Create Publishing Page with parameters:  Current Web, Name of the Page, The Page Layout, Title of the page.  Let’s look at the Create Publishing Page method:   1:   2: private void CreatePublishingPage(SPWeb site, string pageName, string pageLayoutName, string title) 3: { 4: PublishingSite pubSiteCollection = new PublishingSite(site.Site); 5: PublishingWeb pubSite = null; 6: if (pubSiteCollection != null) 7: { 8: // Assign an object to the pubSite variable 9: if (PublishingWeb.IsPublishingWeb(site)) 10: { 11: pubSite = PublishingWeb.GetPublishingWeb(site); 12: } 13: } 14: // Search for the page layout for creating the new page 15: PageLayout currentPageLayout = FindPageLayout(pubSiteCollection, pageLayoutName); 16: // Check or the Page Layout could be found in the collection 17: // if not (== null, return because the page has to be based on 18: // an excisting Page Layout 19: if (currentPageLayout == null) 20: { 21: return; 22: } 23:   24: 25: PublishingPageCollection pages = pubSite.GetPublishingPages(); 26: foreach (PublishingPage p in pages) 27: { 28: //The page allready exists 29: if ((p.Name == pageName)) return; 30:   31: } 32: 33:   34:   35: PublishingPage newPage = pages.Add(pageName, currentPageLayout); 36: newPage.Description = pageName.Replace(".aspx", ""); 37: // Here you can set some properties like: 38: newPage.IncludeInCurrentNavigation = true; 39: newPage.IncludeInGlobalNavigation = true; 40: newPage.Title = title; 41: 42: 43:   44:   45: 46:   47: //build the page 48:   49: 50: switch (pageName) 51: { 52: case "Homer.aspx": 53: checkOut("Courier.aspx", newPage); 54: BuildHomePage(site, newPage); 55: break; 56:   57:   58: default: 59: break; 60: } 61: // newPage.Update(); 62: //Now we can checkin the newly created page to the “pages” library 63: checkin(newPage, pubSite); 64: 65: 66: }     The narrative in what is going on here is: 1.  We need to find out if we are dealing with a Publishing Web.  2.  Get the Page Layout 3.  Create the Page in the pages list. 4.  Based on the page name we build that page.  (Here is where we can add all the methods to build multiple pages.) In the switch we call Build Home Page where all the work is done to add the web parts.  Prior to adding the web parts we need to add references to the two web part projects in the solution. using WeatherWebPart.WeatherWebPart; using CSSharePointCustomCalendar.CustomCalendarWebPart;   We can then reference them in the Build Home Page method.   Let’s look at Build Home Page: 1:   2: private static void BuildHomePage(SPWeb web, PublishingPage pubPage) 3: { 4: // build the pages 5: // Get the web part manager for each page and do the same code as below (copy and paste, change to the web parts for the page) 6: // Part Description 7: SPLimitedWebPartManager mgr = web.GetLimitedWebPartManager(web.Url + "/Pages/Home.aspx", System.Web.UI.WebControls.WebParts.PersonalizationScope.Shared); 8: WeatherWebPart.WeatherWebPart.WeatherWebPart wwp = new WeatherWebPart.WeatherWebPart.WeatherWebPart() { ChromeType = PartChromeType.None, Title = "Todays Weather", AreaCode = "2504627" }; 9: //Dictionary<string, string> wwpDic= new Dictionary<string, string>(); 10: //wwpDic.Add("AreaCode", "2504627"); 11: //setWebPartProperties(wwp, "WeatherWebPart", wwpDic); 12:   13: // Add the web part to a pagelayout Web Part Zone 14: mgr.AddWebPart(wwp, "g_685594D193AA4BBFABEF2FB0C8A6C1DD", 1); 15:   16: CSSharePointCustomCalendar.CustomCalendarWebPart.CustomCalendarWebPart cwp = new CustomCalendarWebPart() { ChromeType = PartChromeType.None, Title = "Corporate Calendar", listName="CorporateCalendar" }; 17:   18: mgr.AddWebPart(cwp, "g_20CBAA1DF45949CDA5D351350462E4C6", 1); 19:   20:   21: pubPage.Update(); 22:   23: } Here is what we are doing: 1.  We got  a reference to the SharePoint Limited Web Part Manager and linked/referenced Home.aspx  2.  Instantiated the a new Weather Web Part and used the Manager to add it to the page in a web part zone identified by ID,  thus the need for a Page Layout where the developer knows the ID’s. 3.  Instantiated the Calendar Web Part and used the Manager to add it to the page. 4. We the called the Publishing Page update method. 5.  Lastly, the Create Publishing Page method checks in the page just created.   Here is a screen shot of the page right after a deploy!       Okay!  I know we could make a home page look much better!  However, I built this whole Integrated solution in less than a day with the caveat that the Green Master was already built!  So what am I saying?  Build you web parts, master pages, etc.  At the very end of the engagement build the pages.  The client will be very happy!  Here is the code for this solution Code

    Read the article

  • Getting Started with TypeScript – Classes, Static Types and Interfaces

    - by dwahlin
    I had the opportunity to speak on different JavaScript topics at DevConnections in Las Vegas this fall and heard a lot of interesting comments about JavaScript as I talked with people. The most frequent comment I heard from people was, “I guess it’s time to start learning JavaScript”. Yep – if you don’t already know JavaScript then it’s time to learn it. As HTML5 becomes more and more popular the amount of JavaScript code written will definitely increase. After all, many of the HTML5 features available in browsers have little to do with “tags” and more to do with JavaScript (web workers, web sockets, canvas, local storage, etc.). As the amount of JavaScript code being used in applications increases, it’s more important than ever to structure the code in a way that’s maintainable and easy to debug. While JavaScript patterns can certainly be used (check out my previous posts on the subject or my course on Pluralsight.com), several alternatives have come onto the scene such as CoffeeScript, Dart and TypeScript. In this post I’ll describe some of the features TypeScript offers and the benefits that they can potentially offer enterprise-scale JavaScript applications. It’s important to note that while TypeScript has several great features, it’s definitely not for everyone or every project especially given how new it is. The goal of this post isn’t to convince you to use TypeScript instead of standard JavaScript….I’m a big fan of JavaScript. Instead, I’ll present several TypeScript features and let you make the decision as to whether TypeScript is a good fit for your applications. TypeScript Overview Here’s the official definition of TypeScript from the http://typescriptlang.org site: “TypeScript is a language for application-scale JavaScript development. TypeScript is a typed superset of JavaScript that compiles to plain JavaScript. Any browser. Any host. Any OS. Open Source.” TypeScript was created by Anders Hejlsberg (the creator of the C# language) and his team at Microsoft. To sum it up, TypeScript is a new language that can be compiled to JavaScript much like alternatives such as CoffeeScript or Dart. It isn’t a stand-alone language that’s completely separate from JavaScript’s roots though. It’s a superset of JavaScript which means that standard JavaScript code can be placed in a TypeScript file (a file with a .ts extension) and used directly. That’s a very important point/feature of the language since it means you can use existing code and frameworks with TypeScript without having to do major code conversions to make it all work. Once a TypeScript file is saved it can be compiled to JavaScript using TypeScript’s tsc.exe compiler tool or by using a variety of editors/tools. TypeScript offers several key features. First, it provides built-in type support meaning that you define variables and function parameters as being “string”, “number”, “bool”, and more to avoid incorrect types being assigned to variables or passed to functions. Second, TypeScript provides a way to write modular code by directly supporting class and module definitions and it even provides support for custom interfaces that can be used to drive consistency. Finally, TypeScript integrates with several different tools such as Visual Studio, Sublime Text, Emacs, and Vi to provide syntax highlighting, code help, build support, and more depending on the editor. Find out more about editor support at http://www.typescriptlang.org/#Download. TypeScript can also be used with existing JavaScript frameworks such as Node.js, jQuery, and others and even catch type issues and provide enhanced code help. Special “declaration” files that have a d.ts extension are available for Node.js, jQuery, and other libraries out-of-the-box. Visit http://typescript.codeplex.com/SourceControl/changeset/view/fe3bc0bfce1f#samples%2fjquery%2fjquery.d.ts for an example of a jQuery TypeScript declaration file that can be used with tools such as Visual Studio 2012 to provide additional code help and ensure that a string isn’t passed to a parameter that expects a number. Although declaration files certainly aren’t required, TypeScript’s support for declaration files makes it easier to catch issues upfront while working with existing libraries such as jQuery. In the future I expect TypeScript declaration files will be released for different HTML5 APIs such as canvas, local storage, and others as well as some of the more popular JavaScript libraries and frameworks. Getting Started with TypeScript To get started learning TypeScript visit the TypeScript Playground available at http://www.typescriptlang.org. Using the playground editor you can experiment with TypeScript code, get code help as you type, and see the JavaScript that TypeScript generates once it’s compiled. Here’s an example of the TypeScript playground in action:   One of the first things that may stand out to you about the code shown above is that classes can be defined in TypeScript. This makes it easy to group related variables and functions into a container which helps tremendously with re-use and maintainability especially in enterprise-scale JavaScript applications. While you can certainly simulate classes using JavaScript patterns (note that ECMAScript 6 will support classes directly), TypeScript makes it quite easy especially if you come from an object-oriented programming background. An example of the Greeter class shown in the TypeScript Playground is shown next: class Greeter { greeting: string; constructor (message: string) { this.greeting = message; } greet() { return "Hello, " + this.greeting; } } Looking through the code you’ll notice that static types can be defined on variables and parameters such as greeting: string, that constructors can be defined, and that functions can be defined such as greet(). The ability to define static types is a key feature of TypeScript (and where its name comes from) that can help identify bugs upfront before even running the code. Many types are supported including primitive types like string, number, bool, undefined, and null as well as object literals and more complex types such as HTMLInputElement (for an <input> tag). Custom types can be defined as well. The JavaScript output by compiling the TypeScript Greeter class (using an editor like Visual Studio, Sublime Text, or the tsc.exe compiler) is shown next: var Greeter = (function () { function Greeter(message) { this.greeting = message; } Greeter.prototype.greet = function () { return "Hello, " + this.greeting; }; return Greeter; })(); Notice that the code is using JavaScript prototyping and closures to simulate a Greeter class in JavaScript. The body of the code is wrapped with a self-invoking function to take the variables and functions out of the global JavaScript scope. This is important feature that helps avoid naming collisions between variables and functions. In cases where you’d like to wrap a class in a naming container (similar to a namespace in C# or a package in Java) you can use TypeScript’s module keyword. The following code shows an example of wrapping an AcmeCorp module around the Greeter class. In order to create a new instance of Greeter the module name must now be used. This can help avoid naming collisions that may occur with the Greeter class.   module AcmeCorp { export class Greeter { greeting: string; constructor (message: string) { this.greeting = message; } greet() { return "Hello, " + this.greeting; } } } var greeter = new AcmeCorp.Greeter("world"); In addition to being able to define custom classes and modules in TypeScript, you can also take advantage of inheritance by using TypeScript’s extends keyword. The following code shows an example of using inheritance to define two report objects:   class Report { name: string; constructor (name: string) { this.name = name; } print() { alert("Report: " + this.name); } } class FinanceReport extends Report { constructor (name: string) { super(name); } print() { alert("Finance Report: " + this.name); } getLineItems() { alert("5 line items"); } } var report = new FinanceReport("Month's Sales"); report.print(); report.getLineItems();   In this example a base Report class is defined that has a variable (name), a constructor that accepts a name parameter of type string, and a function named print(). The FinanceReport class inherits from Report by using TypeScript’s extends keyword. As a result, it automatically has access to the print() function in the base class. In this example the FinanceReport overrides the base class’s print() method and adds its own. The FinanceReport class also forwards the name value it receives in the constructor to the base class using the super() call. TypeScript also supports the creation of custom interfaces when you need to provide consistency across a set of objects. The following code shows an example of an interface named Thing (from the TypeScript samples) and a class named Plane that implements the interface to drive consistency across the app. Notice that the Plane class includes intersect and normal as a result of implementing the interface.   interface Thing { intersect: (ray: Ray) => Intersection; normal: (pos: Vector) => Vector; surface: Surface; } class Plane implements Thing { normal: (pos: Vector) =>Vector; intersect: (ray: Ray) =>Intersection; constructor (norm: Vector, offset: number, public surface: Surface) { this.normal = function (pos: Vector) { return norm; } this.intersect = function (ray: Ray): Intersection { var denom = Vector.dot(norm, ray.dir); if (denom > 0) { return null; } else { var dist = (Vector.dot(norm, ray.start) + offset) / (-denom); return { thing: this, ray: ray, dist: dist }; } } } }   At first glance it doesn’t appear that the surface member is implemented in Plane but it’s actually included automatically due to the public surface: Surface parameter in the constructor. Adding public varName: Type to a constructor automatically adds a typed variable into the class without having to explicitly write the code as with normal and intersect. TypeScript has additional language features but defining static types and creating classes, modules, and interfaces are some of the key features it offers. So is TypeScript right for you and your applications? That’s a not a question that I or anyone else can answer for you. You’ll need to give it a spin to see what you think. In future posts I’ll discuss additional details about TypeScript and how it can be used with enterprise-scale JavaScript applications. In the meantime, I’m in the process of working with John Papa on a new Typescript course for Pluralsight that we hope to have out in December of 2012.

    Read the article

  • Farseer tutorial for the absolute beginners

    - by Bil Simser
    This post is inspired (and somewhat a direct copy) of a couple of posts Emanuele Feronato wrote back in 2009 about Box2D (his tutorial was ActionScript 3 based for Box2D, this is C# XNA for the Farseer Physics Engine). Here’s what we’re building: What is Farseer The Farseer Physics Engine is a collision detection system with realistic physics responses to help you easily create simple hobby games or complex simulation systems. Farseer was built as a .NET version of Box2D (based on the Box2D.XNA port of Box2D). While the constructs and syntax has changed over the years, the principles remain the same. This tutorial will walk you through exactly what Emanuele create for Flash but we’ll be doing it using C#, XNA and the Windows Phone platform. The first step is to download the library from its home on CodePlex. If you have NuGet installed, you can install the library itself using the NuGet package that but we’ll also be using some code from the Samples source that can only be obtained by downloading the library. Once you download and unpacked the zip file into a folder and open the solution, this is what you will get: The Samples XNA WP7 project (and content) have all the demos for Farseer. There’s a wealth of info here and great examples to look at to learn. The Farseer Physics XNA WP7 project contains the core libraries that do all the work. DebugView XNA contains an XNA-ready class to let you view debug data and information in the game draw loop (which you can copy into your project or build the source and reference the assembly). The downloaded version has to be compiled as it’s only available in source format so you can do that now if you want (open the solution file and rebuild everything). If you’re using the NuGet package you can just install that. We only need the core library and we’ll be copying in some code from the samples later. Your first Farseer experiment Start Visual Studio and create a new project using the Windows Phone template can call it whatever you want. It’s time to edit Game1.cs 1 public class Game1 : Game 2 { 3 private readonly GraphicsDeviceManager _graphics; 4 private DebugViewXNA _debugView; 5 private Body _floor; 6 private SpriteBatch _spriteBatch; 7 private float _timer; 8 private World _world; 9 10 public Game1() 11 { 12 _graphics = new GraphicsDeviceManager(this) 13 { 14 PreferredBackBufferHeight = 800, 15 PreferredBackBufferWidth = 480, 16 IsFullScreen = true 17 }; 18 19 Content.RootDirectory = "Content"; 20 21 // Frame rate is 30 fps by default for Windows Phone. 22 TargetElapsedTime = TimeSpan.FromTicks(333333); 23 24 // Extend battery life under lock. 25 InactiveSleepTime = TimeSpan.FromSeconds(1); 26 } 27 28 protected override void LoadContent() 29 { 30 // Create a new SpriteBatch, which can be used to draw textures. 31 _spriteBatch = new SpriteBatch(_graphics.GraphicsDevice); 32 33 // Load our font (DebugViewXNA needs it for the DebugPanel) 34 Content.Load<SpriteFont>("font"); 35 36 // Create our World with a gravity of 10 vertical units 37 if (_world == null) 38 { 39 _world = new World(Vector2.UnitY*10); 40 } 41 else 42 { 43 _world.Clear(); 44 } 45 46 if (_debugView == null) 47 { 48 _debugView = new DebugViewXNA(_world); 49 50 // default is shape, controller, joints 51 // we just want shapes to display 52 _debugView.RemoveFlags(DebugViewFlags.Controllers); 53 _debugView.RemoveFlags(DebugViewFlags.Joint); 54 55 _debugView.LoadContent(GraphicsDevice, Content); 56 } 57 58 // Create and position our floor 59 _floor = BodyFactory.CreateRectangle( 60 _world, 61 ConvertUnits.ToSimUnits(480), 62 ConvertUnits.ToSimUnits(50), 63 10f); 64 _floor.Position = ConvertUnits.ToSimUnits(240, 775); 65 _floor.IsStatic = true; 66 _floor.Restitution = 0.2f; 67 _floor.Friction = 0.2f; 68 } 69 70 protected override void Update(GameTime gameTime) 71 { 72 // Allows the game to exit 73 if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) 74 Exit(); 75 76 // Create a random box every second 77 _timer += (float) gameTime.ElapsedGameTime.TotalSeconds; 78 if (_timer >= 1.0f) 79 { 80 // Reset our timer 81 _timer = 0f; 82 83 // Determine a random size for each box 84 var random = new Random(); 85 var width = random.Next(20, 100); 86 var height = random.Next(20, 100); 87 88 // Create it and store the size in the user data 89 var box = BodyFactory.CreateRectangle( 90 _world, 91 ConvertUnits.ToSimUnits(width), 92 ConvertUnits.ToSimUnits(height), 93 10f, 94 new Point(width, height)); 95 96 box.BodyType = BodyType.Dynamic; 97 box.Restitution = 0.2f; 98 box.Friction = 0.2f; 99 100 // Randomly pick a location along the top to drop it from 101 box.Position = ConvertUnits.ToSimUnits(random.Next(50, 400), 0); 102 } 103 104 // Advance all the elements in the world 105 _world.Step(Math.Min((float) gameTime.ElapsedGameTime.TotalMilliseconds*0.001f, (1f/30f))); 106 107 // Clean up any boxes that have fallen offscreen 108 foreach (var box in from box in _world.BodyList 109 let pos = ConvertUnits.ToDisplayUnits(box.Position) 110 where pos.Y > _graphics.GraphicsDevice.Viewport.Height 111 select box) 112 { 113 _world.RemoveBody(box); 114 } 115 116 base.Update(gameTime); 117 } 118 119 protected override void Draw(GameTime gameTime) 120 { 121 GraphicsDevice.Clear(Color.FromNonPremultiplied(51, 51, 51, 255)); 122 123 _spriteBatch.Begin(); 124 125 var projection = Matrix.CreateOrthographicOffCenter( 126 0f, 127 ConvertUnits.ToSimUnits(_graphics.GraphicsDevice.Viewport.Width), 128 ConvertUnits.ToSimUnits(_graphics.GraphicsDevice.Viewport.Height), 0f, 0f, 129 1f); 130 _debugView.RenderDebugData(ref projection); 131 132 _spriteBatch.End(); 133 134 base.Draw(gameTime); 135 } 136 } 137 Lines 4: Declare the debug view we’ll use for rendering (more on that later). Lines 8: Declare _world variable of type class World. World is the main object to interact with the Farseer engine. It stores all the joints and bodies, and is responsible for stepping through the simulation. Lines 12-17: Create the graphics device we’ll be rendering on. This is an XNA component and we’re just setting it to be the same size as the phone and toggling it to be full screen (no system tray). Lines 34: We create a SpriteFont here by adding it to the project. It’s called “font” because that’s what the DebugView uses but you can name it whatever you want (and if you’re not using DebugView for your production app you might have several fonts). Lines 37-44: We create the physics environment that Farseer uses to contain all the objects by specifying it here. We’re using Vector2.UnitY*10 to represent the gravity to be used in the environment. In other words, 10 units going in a downward motion. Lines 46-56: We create the DebugViewXNA here. This is copied from the […] from the code you downloaded and provides the ability to render all entities onto the screen. In a production release you’ll be doing the rendering yourself of each object but we cheat a bit for the demo and let the DebugView do it for us. The other thing it can provide is to render out a panel of debugging information while the simulation is going on. This is useful in tracking down objects, figuring out how something works, or just keeping track of what’s in the engine. Lines 49-67: Here we create a rigid body (Farseer only supports rigid bodies) to represent the floor that we’ll drop objects onto. We create it by using one of the Farseer factories and specifying the width and height. The ConvertUnits class is copied from the samples code as-is and lets us toggle between display units (pixels) and simulation units (usually metres). We’re creating a floor that’s 480 pixels wide and 50 pixels high (converting them to SimUnits for the engine to understand). We also position it near the bottom of the screen. Values are in metres and when specifying values they refer to the centre of the body object. Lines 77-78: The game Update method fires 30 times a second, too fast to be creating objects this quickly. So we use a variable to track the elapsed seconds since the last update, accumulate that value, then create a new box to drop when 1 second has passed. Lines 89-94: We create a box the same way we created our floor (coming up with a random width and height for the box). Lines 96-101: We set the box to be Dynamic (rather than Static like the floor object) and position it somewhere along the top of the screen. And now you created the world. Gravity does the rest and the boxes fall to the ground. Here’s the result: Farseer Physics Engine Demo using XNA Lines 105: We must update the world at every frame. We do this with the Step method which takes in the time interval. [more] Lines 108-114: Body objects are added to the world but never automatically removed (because Farseer doesn’t know about the display world, it has no idea if an item is on the screen or not). Here we just loop through all the entities and anything that’s dropped off the screen (below the bottom) gets removed from the World. This keeps our entity count down (the simulation never has more than 30 or 40 objects in the world no matter how long you run it for). Too many entities and the app will grind to a halt. Lines 125-130: Farseer knows nothing about the UI so that’s entirely up to you as to how to draw things. Farseer is just tracking the objects and moving them around using the physics engine and it’s rules. You’ll still use XNA to draw items (using the SpriteBatch.Draw method) so you can load up your usual textures and draw items and pirates and dancing zombies all over the screen. Instead in this demo we’re going to cheat a little. In the sample code for Farseer you can download there’s a project called DebugView XNA. This project contains the DebugViewXNA class which just handles iterating through all the bodies in the world and drawing the shapes. So we call the RenderDebugData method here of that class to draw everything correctly. In the case of this demo, we just want to draw Shapes so take a look at the source code for the DebugViewXNA class as to how it extracts all the vertices for the shapes created (in this case simple boxes) and draws them. You’ll learn a *lot* about how Farseer works just by looking at this class. That’s it, that’s all. Simple huh? Hope you enjoy the code and library. Physics is hard and requires some math skills to really grok. The Farseer Physics Engine makes it pretty easy to get up and running and start building games. In future posts we’ll get more in-depth with things you can do with the engine so this is just the beginning. Enjoy!

    Read the article

  • jqgrid with asp.net webmethod and json working with sorting, paging, searching and LINQ

    - by aimlessWonderer
    THIS WORKS! Most topics covering jqgrid and asp.net seem to relate to just receiving JSON, or working in the MVC framework, or utilizing other handlers or web services... but not many dealt with actually passing parameters back to an actual webmethod in the codebehind. Furthermore, scarce are the examples that contain successful implementation the AJAX paging, sorting, or searching along with LINQ to SQL for asp.net jqGrid. Below is a working example that may help others who need help to pass parameters to jqGrid in order to have correct paging, sorting, filtering.. it uses pieces from here and there... ================================================== First, THE JAVASCRIPT <script type="text/javascript"> $(document).ready(function() { var grid = $("#list"); $("#list").jqGrid({ // setup custom parameter names to pass to server prmNames: { search: "isSearch", nd: null, rows: "numRows", page: "page", sort: "sortField", order: "sortOrder" }, // add by default to avoid webmethod parameter conflicts postData: { searchString: '', searchField: '', searchOper: '' }, // setup ajax call to webmethod datatype: function(postdata) { mtype: "GET", $.ajax({ url: 'PageName.aspx/getGridData', type: "POST", contentType: "application/json; charset=utf-8", data: JSON.stringify(postdata), dataType: "json", success: function(data, st) { if (st == "success") { var grid = jQuery("#list")[0]; grid.addJSONData(JSON.parse(data.d)); } }, error: function() { alert("Error with AJAX callback"); } }); }, // this is what jqGrid is looking for in json callback jsonReader: { root: "rows", page: "page", total: "totalpages", records: "totalrecords", cell: "cell", id: "id", //index of the column with the PK in it userdata: "userdata", repeatitems: true }, colNames: ['Id', 'First Name', 'Last Name'], colModel: [ { name: 'id', index: 'id', width: 55, search: false }, { name: 'fname', index: 'fname', width: 200, searchoptions: { sopt: ['eq', 'ne', 'cn']} }, { name: 'lname', index: 'lname', width: 200, searchoptions: { sopt: ['eq', 'ne', 'cn']} } ], rowNum: 10, rowList: [10, 20, 30], pager: jQuery("#pager"), sortname: "fname", sortorder: "asc", viewrecords: true, caption: "Grid Title Here" }).jqGrid('navGrid', '#pager', { edit: false, add: false, del: false }, {}, // default settings for edit {}, // add {}, // delete { closeOnEscape: true, closeAfterSearch: true}, //search {} ) }); </script> ================================================== Second, THE C# WEBMETHOD [WebMethod] public static string getGridData(int? numRows, int? page, string sortField, string sortOrder, bool isSearch, string searchField, string searchString, string searchOper) { string result = null; MyDataContext db = null; try { //--- retrieve the data db = new MyDataContext("my connection string path"); var query = from u in db.TBL_USERs select u; //--- determine if this is a search filter if (isSearch) { searchOper = getOperator(searchOper); // need to associate correct operator to value sent from jqGrid string whereClause = String.Format("{0} {1} {2}", searchField, searchOper, "@" + searchField); //--- associate value to field parameter Dictionary<string, object> param = new Dictionary<string, object>(); param.Add("@" + searchField, searchString); query = query.Where(whereClause, new object[1] { param }); } //--- setup calculations int pageIndex = page ?? 1; //--- current page int pageSize = numRows ?? 10; //--- number of rows to show per page int totalRecords = query.Count(); //--- number of total items from query int totalPages = (int)Math.Ceiling((decimal)totalRecords / (decimal)pageSize); //--- number of pages //--- filter dataset for paging and sorting IQueryable<TBL_USER> orderedRecords = query.OrderBy(sortfield); IEnumerable<TBL_USER> sortedRecords = orderedRecords.ToList(); if (sortorder == "desc") sortedRecords= sortedRecords.Reverse(); sortedRecords= sortedRecords .Skip((pageIndex - 1) * pageSize) //--- page the data .Take(pageSize); //--- format json var jsonData = new { totalpages = totalPages, //--- number of pages page = pageIndex, //--- current page totalrecords = totalRecords, //--- total items rows = ( from row in sortedRecords select new { i = row.USER_ID, cell = new string[] { row.USER_ID.ToString(), row.FNAME.ToString(), row.LNAME } } ).ToArray() }; result = Newtonsoft.Json.JsonConvert.SerializeObject(jsonData); } catch (Exception ex) { Debug.WriteLine(ex); } finally { if (db != null) db.Dispose(); } return result; } ================================================== Third, NECESSITIES In order to have dynamic OrderBy clauses in the LINQ, I had to pull in a class to my AppCode folder called 'Dynamic.cs'. You can retrieve the file from downloading here. You will find the file in the "DynamicQuery" folder. That file will give you the ability to utilized dynamic ORDERBY clause since we don't know what column we're filtering by except on the initial load. To serialize the JSON back from the C-sharp to the JS, I incorporated the James Newton-King JSON.net DLL found here : http://json.codeplex.com/releases/view/37810. After downloading, there is a "Newtonsoft.Json.Compact.dll" which you can add in your Bin folder as a reference Here's my USING's block using System; using System.Collections; using System.Collections.Generic; using System.Linq; using System.Web.UI.WebControls; using System.Web.Services; using System.Linq.Dynamic; For the Javascript references, I'm using the following scripts in respective order in case that helps some folks: 1) jquery-1.3.2.min.js ... 2) jquery-ui-1.7.2.custom.min.js ... 3) json.min.js ... 4) i18n/grid.locale-en.js ... 5) jquery.jqGrid.min.js For the CSS, I'm using jqGrid's necessities as well as the jQuery UI Theme: 1) jquery_theme/jquery-ui-1.7.2.custom.css ... 2) ui.jqgrid.css The key to getting the parameters from the JS to the WebMethod without having to parse an unserialized string on the backend or having to setup some JS logic to switch methods for different numbers of parameters was this block postData: { searchString: '', searchField: '', searchOper: '' }, Those parameters will still be set correctly when you actually do a search and then reset to empty when you "reset" or want the grid to not do any filtering Hope this helps some others!!!! Please reply if you find major issues or ways of refactoring or doing better that I haven't considered.

    Read the article

  • MVC HTML.RenderAction – Error: Duration must be a positive number

    - by BarDev
    On my website I want the user to have the ability to login/logout from any page. When the user select login button a modal dialog will be present to the user for him to enter in his credentials. Since login will be on every page, I thought I would create a partial view for the login and add it to the layout page. But when I did this I got the following error: Exception Details: System.InvalidOperationException: Duration must be a positive number. There are other ways to work around this that would not using partial views, but I believe this should work. So to test this, I decided to make everything simple with the following code: Created a layout page with the following code @{Html.RenderAction("_Login", "Account");} In the AccountController: public ActionResult _Login() { return PartialView("_Login"); } Partial View _Login <a id="signin">Login</a> But when I run this simple version this I still get this error: Exception Details: System.InvalidOperationException: Duration must be a positive number. Source of error points to "@{Html.RenderAction("_Login", "Account");}" There are some conversations on the web that are similar to my problem, which identifies this as bug with MVC (see links below). But the links pertain to Caching, and I'm not doing any caching. OuputCache Cache Profile does not work for child actions http://aspnet.codeplex.com/workitem/7923 Asp.Net MVC 3 Partial Page Output Caching Not Honoring Config Settings Asp.Net MVC 3 Partial Page Output Caching Not Honoring Config Settings Caching ChildActions using cache profiles won't work? Caching ChildActions using cache profiles won't work? I'm not sure if this makes a difference, but I'll go ahead and add it here. I'm using MVC 3 with Razor. Update Stack Trace [InvalidOperationException: Duration must be a positive number.] System.Web.Mvc.OutputCacheAttribute.ValidateChildActionConfiguration() +624394 System.Web.Mvc.OutputCacheAttribute.OnActionExecuting(ActionExecutingContext filterContext) +127 System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodFilter(IActionFilter filter, ActionExecutingContext preContext, Func1 continuation) +72 System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodFilter(IActionFilter filter, ActionExecutingContext preContext, Func1 continuation) +784922 System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodWithFilters(ControllerContext controllerContext, IList1 filters, ActionDescriptor actionDescriptor, IDictionary2 parameters) +314 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +784976 System.Web.Mvc.Controller.ExecuteCore() +159 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +335 System.Web.Mvc.<c_DisplayClassb.b_5() +62 System.Web.Mvc.Async.<c_DisplayClass1.b_0() +20 System.Web.Mvc.<c_DisplayClasse.b_d() +54 System.Web.Mvc.<c_DisplayClass4.b_3() +15 System.Web.Mvc.ServerExecuteHttpHandlerWrapper.Wrap(Func`1 func) +41 System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride) +1363 [HttpException (0x80004005): Error executing child request for handler 'System.Web.Mvc.HttpHandlerUtil+ServerExecuteHttpHandlerAsyncWrapper'.] System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride) +2419 System.Web.HttpServerUtility.Execute(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage) +275 System.Web.HttpServerUtilityWrapper.Execute(IHttpHandler handler, TextWriter writer, Boolean preserveForm) +94 System.Web.Mvc.Html.ChildActionExtensions.ActionHelper(HtmlHelper htmlHelper, String actionName, String controllerName, RouteValueDictionary routeValues, TextWriter textWriter) +838 System.Web.Mvc.Html.ChildActionExtensions.RenderAction(HtmlHelper htmlHelper, String actionName, String controllerName, RouteValueDictionary routeValues) +56 ASP._Page_Views_Shared_SiteLayout_cshtml.Execute() in c:\Projects\Odat Projects\Odat\Source\Presentation\Odat.PublicWebSite\Views\Shared\SiteLayout.cshtml:80 System.Web.WebPages.WebPageBase.ExecutePageHierarchy() +280 System.Web.Mvc.WebViewPage.ExecutePageHierarchy() +104 System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) +173 System.Web.WebPages.WebPageBase.Write(HelperResult result) +89 System.Web.WebPages.WebPageBase.RenderSurrounding(String partialViewName, Action1 body) +234 System.Web.WebPages.WebPageBase.PopContext() +234 System.Web.Mvc.ViewResultBase.ExecuteResult(ControllerContext context) +384 System.Web.Mvc.<>c__DisplayClass1c.<InvokeActionResultWithFilters>b__19() +33 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func1 continuation) +784900 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func1 continuation) +784900 System.Web.Mvc.ControllerActionInvoker.InvokeActionResultWithFilters(ControllerContext controllerContext, IList1 filters, ActionResult actionResult) +265 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +784976 System.Web.Mvc.Controller.ExecuteCore() +159 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +335 System.Web.Mvc.<c_DisplayClassb.b_5() +62 System.Web.Mvc.Async.<c_DisplayClass1.b_0() +20 System.Web.Mvc.<c_DisplayClasse.b_d() +54 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +453 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +371 Update When I Break in Code, it errors at @{Html.RenderAction("_Login", "Account");} with the following exception. The inner exception Error executing child request for handler 'System.Web.Mvc.HttpHandlerUtil+ServerExecuteHttpHandlerAsyncWrapper'. at System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride) at System.Web.HttpServerUtility.Execute(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage) at System.Web.HttpServerUtilityWrapper.Execute(IHttpHandler handler, TextWriter writer, Boolean preserveForm) at System.Web.Mvc.Html.ChildActionExtensions.ActionHelper(HtmlHelper htmlHelper, String actionName, String controllerName, RouteValueDictionary routeValues, TextWriter textWriter) at System.Web.Mvc.Html.ChildActionExtensions.RenderAction(HtmlHelper htmlHelper, String actionName, String controllerName, RouteValueDictionary routeValues) at ASP._Page_Views_Shared_SiteLayout_cshtml.Execute() in c:\Projects\Odat Projects\Odat\Source\Presentation\Odat.PublicWebSite\Views\Shared\SiteLayout.cshtml:line 80 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.WebPages.WebPageBase.Write(HelperResult result) at System.Web.WebPages.WebPageBase.RenderSurrounding(String partialViewName, Action1 body) at System.Web.WebPages.WebPageBase.PopContext() at System.Web.Mvc.ViewResultBase.ExecuteResult(ControllerContext context) at System.Web.Mvc.ControllerActionInvoker.<>c__DisplayClass1c.<InvokeActionResultWithFilters>b__19() at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func1 continuation) Answer Thanks Darin Dimitrov Come to find out, my AccountController had the following attribute [System.Web.Mvc.OutputCache(NoStore =true, Duration = 0, VaryByParam = "*")]. I don't believe this should caused a problem, but when I removed the attribute everything worked. BarDev

    Read the article

  • Unrecognized configuration section httpHandlers in Web.Config with Microsoft Visual Web Developer 20

    - by FatboyFudge
    Hi all, I am in need of some help with an error message I get with Microsoft Visual Web Developer 2010 Express. I would like to create a gallery for my site so I downloaded the NotesForGallery from codeplex. I have added the reference into the project like it told me to in the installation instructions. The instructions then say Register the ThumbnailHandler in the Web.Config file (httpHandlers section): <httpHandlers> … <add verb="*" path="ThumbnailHandler.ashx" type="NotesFor.ThumbnailHandler, NotesForGallery"/> … </httpHandlers> So I open the web.config file in my solution and I add it in. When I try and start the website (clicking the play button in Web Developer) I get the error message: Unrecognized configuration section httpHandlers. The complete list of errors I get are: Message 1 Could not find schema information for the element 'httpHandlers'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 38 4 C:...\FatBoyFudge\ Message 2 Could not find schema information for the element 'add'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 39 8 C:...\FatBoyFudge\ Message 3 Could not find schema information for the attribute 'verb'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 39 12 C:...\FatBoyFudge\ Message 4 Could not find schema information for the attribute 'path'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 39 21 C:...\FatBoyFudge\ Message 5 Could not find schema information for the attribute 'type'. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 39 50 C:...\FatBoyFudge\ Error 6 Unrecognized configuration section httpHandlers. C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Web.config 38 Warning 7 C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Gallery.aspx: ASP.NET runtime error: Unrecognized configuration section httpHandlers. (C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\web.config line 38) C:\Documents and Settings\adam\My Documents\Visual Studio 2010\WebSites\FatBoyFudge\Gallery.aspx 1 1 C:...\FatBoyFudge\ The project I created was a website if that helps any. The complete web.config is as follows: <configuration> <connectionStrings> <add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> <compilation debug="true" targetFramework="4.0"/> <authentication mode="Forms"> <forms loginUrl="~/Account/Login.aspx" timeout="2880"/> </authentication> <membership> <providers> <clear/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/"/> </providers> </membership> <profile> <providers> <clear/> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/"/> </providers> </profile> <roleManager enabled="false"> <providers> <clear/> <add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/"/> <add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/"/> </providers> </roleManager> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true"/> </system.webServer> <httpHandlers> <add verb="*" path="ThumbnailHandler.ashx" type="NotesFor.ThumbnailHandler, NotesForGallery"/> </httpHandlers> </configuration> Any help you could give me would be handy because I'm not sure what I am doing wrong

    Read the article

  • why is LZMA SDK (7-zip) so slow

    - by Tono Nam
    I found 7-zip great and I will like to use it on .net applications. I have a 10MB file (a.001) and it takes: 2 seconds to encode. Now it will be nice if I could do the same thing on c#. I have downloaded http://www.7-zip.org/sdk.html LZMA SDK c# source code. I basically copied the CS directory into a console application in visual studio: Then I compiled and eveything compiled smoothly. So on the output directory I placed the file a.001 which is 10MB of size. On the main method that came on the source code I placed: [STAThread] static int Main(string[] args) { // e stands for encode args = "e a.001 output.7z".Split(' '); // added this line for debug try { return Main2(args); } catch (Exception e) { Console.WriteLine("{0} Caught exception #1.", e); // throw e; return 1; } } when I execute the console application the application works great and I get the output a.7z on the working directory. The problem is that it takes so long. It takes about 15 seconds to execute! I have also tried http://stackoverflow.com/a/8775927/637142 approach and it also takes very long. Why is it 10 times slower than the actual program ? Also Even if I set to use only one thread: It still takes much less time (3 seconds vs 15): (Edit) Another Possibility Could it be because C# is slower than assembly or C ? I notice that the algorithm does a lot of heavy operations. For example compare these two blocks of code. They both do the same thing: C void main() { time_t now; int i,j,k,x; long counter ; counter = 0; now = time(NULL); /* LOOP */ for(x=0; x<10; x++) { counter = -1234567890 + x+2; for (j = 0; j < 10000; j++) for(i = 0; i< 1000; i++) for(k =0; k<1000; k++) { if(counter > 10000) counter = counter - 9999; else counter= counter +1; } printf (" %d \n", time(NULL) - now); // display elapsed time } printf("counter = %d\n\n",counter); // display result of counter printf ("Elapsed time = %d seconds ", time(NULL) - now); gets("Wait"); } output c# static void Main(string[] args) { DateTime now; int i, j, k, x; long counter; counter = 0; now = DateTime.Now; /* LOOP */ for (x = 0; x < 10; x++) { counter = -1234567890 + x + 2; for (j = 0; j < 10000; j++) for (i = 0; i < 1000; i++) for (k = 0; k < 1000; k++) { if (counter > 10000) counter = counter - 9999; else counter = counter + 1; } Console.WriteLine((DateTime.Now - now).Seconds.ToString()); } Console.Write("counter = {0} \n", counter.ToString()); Console.Write("Elapsed time = {0} seconds", DateTime.Now - now); Console.Read(); } Output Note how much slower was c#. Both programs where run from outside visual studio on release mode. Maybe that is the reason why it takes so much longer in .net than on c++. Conclusion I cannot seem to know what is causing the problem. I guess I will use 7z.dll and invoke the necessary methods from c#. A library that does that is at: http://sevenzipsharp.codeplex.com/ and that way I am using the same library that 7zip is using as: // dont forget to add reference to SevenZipSharp located on the link I provided static void Main(string[] args) { // load the dll SevenZip.SevenZipCompressor.SetLibraryPath(@"C:\Program Files (x86)\7-Zip\7z.dll"); SevenZip.SevenZipCompressor compress = new SevenZip.SevenZipCompressor(); compress.CompressDirectory("MyFolderToArchive", "output.7z"); }

    Read the article

  • Making WCF Output a single WSDL file for interop purposes.

    - by Glav
    By default, when WCF emits a WSDL definition for your services, it can often contain many links to others related schemas that need to be imported. For the most part, this is fine. WCF clients understand this type of schema without issue, and it conforms to the requisite standards as far as WSDL definitions go. However, some non Microsoft stacks will only work with a single WSDL file and require that all definitions for the service(s) (port types, messages, operation etc…) are contained within that single file. In other words, no external imports are supported. Some Java clients (to my working knowledge) have this limitation. This obviously presents a problem when trying to create services exposed for consumption and interop by these clients. Note: You can download the full source code for this sample from here To illustrate this point, lets say we have a simple service that looks like: Service Contract public interface IService1 { [OperationContract] [FaultContract(typeof(DataFault))] string GetData(DataModel1 model); [OperationContract] [FaultContract(typeof(DataFault))] string GetMoreData(DataModel2 model); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Service Implementation/Behaviour public class Service1 : IService1 { public string GetData(DataModel1 model) { return string.Format("Some Field was: {0} and another field was {1}", model.SomeField,model.AnotherField); } public string GetMoreData(DataModel2 model) { return string.Format("Name: {0}, age: {1}", model.Name, model.Age); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Configuration File <system.serviceModel> <services> <service name="SingleWSDL_WcfService.Service1" behaviorConfiguration="SingleWSDL_WcfService.Service1Behavior"> <!-- ...std/default data omitted for brevity..... --> <endpoint address ="" binding="wsHttpBinding" contract="SingleWSDL_WcfService.IService1" > ....... </services> <behaviors> <serviceBehaviors> <behavior name="SingleWSDL_WcfService.Service1Behavior"> ........ </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } When WCF is asked to produce a WSDL for this service, it will produce a file that looks something like this (note: some sections omitted for brevity): <?xml version="1.0" encoding="utf-8" ?> - <wsdl:definitions name="Service1" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" ...... namespace definitions omitted for brevity + &lt;wsp:Policy wsu:Id="WSHttpBinding_IService1_policy"> ... multiple policy items omitted for brevity </wsp:Policy> - <wsdl:types> - <xsd:schema targetNamespace="http://tempuri.org/Imports"> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd0" namespace="http://tempuri.org/" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd3" namespace="Http://SingleWSDL/Fault" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd1" namespace="http://schemas.microsoft.com/2003/10/Serialization/" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd2" namespace="http://SingleWSDL/Model1" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd4" namespace="http://SingleWSDL/Model2" /> </xsd:schema> </wsdl:types> + <wsdl:message name="IService1_GetData_InputMessage"> .... </wsdl:message> - <wsdl:operation name="GetData"> ..... </wsdl:operation> - <wsdl:service name="Service1"> ....... </wsdl:service> </wsdl:definitions> The above snippet from the WSDL shows the external links and references that are generated by WCF for a relatively simple service. Note the xsd:import statements that reference external XSD definitions which are also generated by WCF. In order to get WCF to produce a single WSDL file, we first need to follow some good practices when it comes to WCF service definitions. Step 1: Define a namespace for your service contract. [ServiceContract(Namespace="http://SingleWSDL/Service1")] public interface IService1 { ...... } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Normally you would not use a literal string and may instead define a constant to use in your own application for the namespace. When this is applied and we generate the WSDL, we get the following statement inserted into the document: <wsdl:import namespace="http://SingleWSDL/Service1" location="http://localhost:2370/HostingSite/Service-default.svc?wsdl=wsdl0" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } All the previous imports have gone. If we follow this link, we will see that the XSD imports are now in this external WSDL file. Not really any benefit for our purposes. Step 2: Define a namespace for your service behaviour [ServiceBehavior(Namespace = "http://SingleWSDL/Service1")] public class Service1 : IService1 { ...... } As you can see, the namespace of the service behaviour should be the same as the service contract interface to which it implements. Failure to do these tasks will cause WCF to emit its default http://tempuri.org namespace all over the place and cause WCF to still generate import statements. This is also true if the namespace of the contract and behaviour differ. If you define one and not the other, defaults kick in, and you’ll find extra imports generated. While each of the previous 2 steps wont cause any less import statements to be generated, you will notice that namespace definitions within the WSDL have identical, well defined names. Step 3: Define a binding namespace In the configuration file, modify the endpoint configuration line item to iunclude a bindingNamespace attribute which is the same as that defined on the service behaviour and service contract <endpoint address="" binding="wsHttpBinding" contract="SingleWSDL_WcfService.IService1" bindingNamespace="http://SingleWSDL/Service1"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } However, this does not completely solve the issue. What this will do is remove the WSDL import statements like this one: <wsdl:import namespace="http://SingleWSDL/Service1" location="http://localhost:2370/HostingSite/Service-default.svc?wsdl" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } from the generated WSDL. Finally…. the magic…. Step 4: Use a custom endpoint behaviour to read in external imports and include in the main WSDL output. In order to force WCF to output a single WSDL with all the required definitions, we need to define a custom WSDL Export extension that can be applied to any endpoints. This requires implementing the IWsdlExportExtension and IEndpointBehavior interfaces and then reading in any imported schemas, and adding that output to the main, flattened WSDL to be output. Sounds like fun right…..? Hmmm well maybe not. This step sounds a little hairy, but its actually quite easy thanks to some kind individuals who have already done this for us. As far as I know, there are 2 available implementations that we can easily use to perform the import and “WSDL flattening”.  WCFExtras which is on codeplex and FlatWsdl by Thinktecture. Both implementations actually do exactly the same thing with the imports and provide an endpoint behaviour, however FlatWsdl does a little more work for us by providing a ServiceHostFactory that we can use which automatically attaches the requisite behaviour to our endpoints for us. To use this in an IIS hosted service, we can modify the .SVC file to specify this ne factory to use like so: <%@ ServiceHost Language="C#" Debug="true" Service="SingleWSDL_WcfService.Service1" Factory="Thinktecture.ServiceModel.Extensions.Description.FlatWsdlServiceHostFactory" %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Within a service application or another form of executable such as a console app, we can simply create an instance of the custom service host and open it as we normally would as shown here: FlatWsdlServiceHost host = new FlatWsdlServiceHost(typeof(Service1)); host.Open(); And we are done. WCF will now generate one single WSDL file that contains all he WSDL imports and data/XSD imports. You can download the full source code for this sample from here Hope this has helped you. Note: Please note that I have not extensively tested this in a number of different scenarios so no guarantees there.

    Read the article

  • Making WCF Output a single WSDL file for interop purposes.

    By default, when WCF emits a WSDL definition for your services, it can often contain many links to others related schemas that need to be imported. For the most part, this is fine. WCF clients understand this type of schema without issue, and it conforms to the requisite standards as far as WSDL definitions go. However, some non Microsoft stacks will only work with a single WSDL file and require that all definitions for the service(s) (port types, messages, operation etc) are contained within that single file. In other words, no external imports are supported. Some Java clients (to my working knowledge) have this limitation. This obviously presents a problem when trying to create services exposed for consumption and interop by these clients. Note: You can download the full source code for this sample from here To illustrate this point, lets say we have a simple service that looks like: Service Contract public interface IService1 { [OperationContract] [FaultContract(typeof(DataFault))] string GetData(DataModel1 model); [OperationContract] [FaultContract(typeof(DataFault))] string GetMoreData(DataModel2 model); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Service Implementation/Behaviour public class Service1 : IService1 { public string GetData(DataModel1 model) { return string.Format("Some Field was: {0} and another field was {1}", model.SomeField,model.AnotherField); } public string GetMoreData(DataModel2 model) { return string.Format("Name: {0}, age: {1}", model.Name, model.Age); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Configuration File <system.serviceModel> <services> <service name="SingleWSDL_WcfService.Service1" behaviorConfiguration="SingleWSDL_WcfService.Service1Behavior"> <!-- ...std/default data omitted for brevity..... --> <endpoint address ="" binding="wsHttpBinding" contract="SingleWSDL_WcfService.IService1" > ....... </services> <behaviors> <serviceBehaviors> <behavior name="SingleWSDL_WcfService.Service1Behavior"> ........ </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } When WCF is asked to produce a WSDL for this service, it will produce a file that looks something like this (note: some sections omitted for brevity): <?xml version="1.0" encoding="utf-8" ?> - <wsdl:definitions name="Service1" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" ...... namespace definitions omitted for brevity + <wsp:Policy wsu:Id="WSHttpBinding_IService1_policy"> ... multiple policy items omitted for brevity </wsp:Policy> - <wsdl:types> - <xsd:schema targetNamespace="http://tempuri.org/Imports"> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd0" namespace="http://tempuri.org/" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd3" namespace="Http://SingleWSDL/Fault" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd1" namespace="http://schemas.microsoft.com/2003/10/Serialization/" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd2" namespace="http://SingleWSDL/Model1" /> <xsd:import schemaLocation="http://localhost:2370/HostingSite/Service-default.svc?xsd=xsd4" namespace="http://SingleWSDL/Model2" /> </xsd:schema> </wsdl:types> + <wsdl:message name="IService1_GetData_InputMessage"> .... </wsdl:message> - <wsdl:operation name="GetData"> ..... </wsdl:operation> - <wsdl:service name="Service1"> ....... </wsdl:service> </wsdl:definitions> The above snippet from the WSDL shows the external links and references that are generated by WCF for a relatively simple service. Note the xsd:import statements that reference external XSD definitions which are also generated by WCF. In order to get WCF to produce a single WSDL file, we first need to follow some good practices when it comes to WCF service definitions. Step 1: Define a namespace for your service contract. [ServiceContract(Namespace="http://SingleWSDL/Service1")] public interface IService1 { ...... } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Normally you would not use a literal string and may instead define a constant to use in your own application for the namespace. When this is applied and we generate the WSDL, we get the following statement inserted into the document: <wsdl:import namespace="http://SingleWSDL/Service1" location="http://localhost:2370/HostingSite/Service-default.svc?wsdl=wsdl0" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } All the previous imports have gone. If we follow this link, we will see that the XSD imports are now in this external WSDL file. Not really any benefit for our purposes. Step 2: Define a namespace for your service behaviour [ServiceBehavior(Namespace = "http://SingleWSDL/Service1")] public class Service1 : IService1 { ...... } As you can see, the namespace of the service behaviour should be the same as the service contract interface to which it implements. Failure to do these tasks will cause WCF to emit its default http://tempuri.org namespace all over the place and cause WCF to still generate import statements. This is also true if the namespace of the contract and behaviour differ. If you define one and not the other, defaults kick in, and youll find extra imports generated. While each of the previous 2 steps wont cause any less import statements to be generated, you will notice that namespace definitions within the WSDL have identical, well defined names. Step 3: Define a binding namespace In the configuration file, modify the endpoint configuration line item to iunclude a bindingNamespace attribute which is the same as that defined on the service behaviour and service contract <endpoint address="" binding="wsHttpBinding" contract="SingleWSDL_WcfService.IService1" bindingNamespace="http://SingleWSDL/Service1"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } However, this does not completely solve the issue. What this will do is remove the WSDL import statements like this one: <wsdl:import namespace="http://SingleWSDL/Service1" location="http://localhost:2370/HostingSite/Service-default.svc?wsdl" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } from the generated WSDL. Finally. the magic. Step 4: Use a custom endpoint behaviour to read in external imports and include in the main WSDL output. In order to force WCF to output a single WSDL with all the required definitions, we need to define a custom WSDL Export extension that can be applied to any endpoints. This requires implementing the IWsdlExportExtension and IEndpointBehavior interfaces and then reading in any imported schemas, and adding that output to the main, flattened WSDL to be output. Sounds like fun right..? Hmmm well maybe not. This step sounds a little hairy, but its actually quite easy thanks to some kind individuals who have already done this for us. As far as I know, there are 2 available implementations that we can easily use to perform the import and WSDL flattening.  WCFExtras which is on codeplex and FlatWsdl by Thinktecture. Both implementations actually do exactly the same thing with the imports and provide an endpoint behaviour, however FlatWsdl does a little more work for us by providing a ServiceHostFactory that we can use which automatically attaches the requisite behaviour to our endpoints for us. To use this in an IIS hosted service, we can modify the .SVC file to specify this ne factory to use like so: <%@ ServiceHost Language="C#" Debug="true" Service="SingleWSDL_WcfService.Service1" Factory="Thinktecture.ServiceModel.Extensions.Description.FlatWsdlServiceHostFactory" %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Within a service application or another form of executable such as a console app, we can simply create an instance of the custom service host and open it as we normally would as shown here: FlatWsdlServiceHost host = new FlatWsdlServiceHost(typeof(Service1)); host.Open(); And we are done. WCF will now generate one single WSDL file that contains all he WSDL imports and data/XSD imports. You can download the full source code for this sample from here Hope this has helped you. Note: Please note that I have not extensively tested this in a number of different scenarios so no guarantees there.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Load and Web Performance Testing using Visual Studio Ultimate 2010-Part 3

    - by Tarun Arora
    Welcome back once again, in Part 1 of Load and Web Performance Testing using Visual Studio 2010 I talked about why Performance Testing the application is important, the test tools available in Visual Studio Ultimate 2010 and various test rig topologies, in Part 2 of Load and Web Performance Testing using Visual Studio 2010 I discussed the details of web performance & load tests as well as why it’s important to follow a goal based pattern while performance testing your application. In part 3 I’ll be discussing Test Result Analysis, Test Result Drill through, Test Report Generation, Test Run Comparison, Asp.net Profiler and some closing thoughts. Test Results – I see some creepy worms! In Part 2 we put together a web performance test and a load test, lets run the test to see load test to see how the Web site responds to the load simulation. While the load test is running you will be able to see close to real time analysis in the Load Test Analyser window. You can use the Load Test Analyser to conduct load test analysis in three ways: Monitor a running load test - A condensed set of the performance counter data is maintained in memory. To prevent the results memory requirements from growing unbounded, up to 200 samples for each performance counter are maintained. This includes 100 evenly spaced samples that span the current elapsed time of the run and the most recent 100 samples.         After the load test run is completed - The test controller spools all collected performance counter data to a database while the test is running. Additional data, such as timing details and error details, is loaded into the database when the test completes. The performance data for a completed test is loaded from the database and analysed by the Load Test Analyser. Below you can see a screen shot of the summary view, this provides key results in a format that is compact and easy to read. You can also print the load test summary, this is generated after the test has completed or been stopped.         Analyse the load test results of a previously run load test – We’ll see this in the section where i discuss comparison between two test runs. The performance counters can be plotted on the graphs. You also have the option to highlight a selected part of the test and view details, drill down to the user activity chart where you can hover over to see more details of the test run.   Generate Report => Test Run Comparisons The level of reports you can generate using the Load Test Analyser is astonishing. You have the option to create excel reports and conduct side by side analysis of two test results or to track trend analysis. The tools also allows you to export the graph data either to MS Excel or to a CSV file. You can view the ASP.NET profiler report to conduct further analysis as well. View Data and Diagnostic Attachments opens the Choose Diagnostic Data Adapter Attachment dialog box to select an adapter to analyse the result type. For example, you can select an IntelliTrace adapter, click OK and open the IntelliTrace summary for the test agent that was used in the load test.   Compare results This creates a set of reports that compares the data from two load test results using tables and bar charts. I have taken these screen shots from the MSDN documentation, I would highly recommend exploring the wealth of knowledge available on MSDN. Leaving Thoughts While load testing the application with an excessive load for a longer duration of time, i managed to bring the IIS to its knees by piling up a huge queue of requests waiting to be processed. This clearly means that the IIS had run out of threads as all the threads were busy processing existing request, one easy way of fixing this is by increasing the default number of allocated threads, but this might escalate the problem. The better suggestion is to try and drill down to the actual root cause of the problem. When ever the garbage collection runs it stops processing any pages so all requests that come in during that period are queued up, but realistically the garbage collection completes in fraction of a a second. To understand this better lets look at the .net heap, it is divided into large heap and small heap, anything greater than 85kB in size will be allocated to the Large object heap, the Large object heap is non compacting and remember large objects are expensive to move around, so if you are allocating something in the large object heap, make sure that you really need it! The small object heap on the other hand is divided into generations, so all objects that are supposed to be short-lived are suppose to live in Gen-0 and the long living objects eventually move to Gen-2 as garbage collection goes through.  As you can see in the picture below all < 85 KB size objects are first assigned to Gen-0, when Gen-0 fills up and a new object comes in and finds Gen-0 full, the garbage collection process is started, the process checks for all the dead objects and assigns them as the valid candidate for deletion to free up memory and promotes all the remaining objects in Gen-0 to Gen-1. So in the future when ever you clean up Gen-1 you have to clean up Gen-0 as well. When you fill up Gen – 0 again, all of Gen – 1 dead objects are drenched and rest are moved to Gen-2 and Gen-0 objects are moved to Gen-1 to free up Gen-0, but by this time your Garbage collection process has started to take much more time than it usually takes. Now as I mentioned earlier when garbage collection is being run all page requests that come in during that period are queued up. Does this explain why possibly page requests are getting queued up, apart from this it could also be the case that you are waiting for a long running database process to complete.      Lets explore the heap a bit more… What is really a case of crisis is when the objects are living long enough to make it to Gen-2 and then dying, this is definitely a high cost operation. But sometimes you need objects in memory, for example when you cache data you hold on to the objects because you need to use them right across the user session, which is acceptable. But if you wanted to see what extreme caching can do to your server then write a simple application that chucks in a lot of data in cache, run a load test over it for about 10-15 minutes, forcing a lot of data in memory causing the heap to run out of memory. If you get to such a state where you start running out of memory the IIS as a mode of recovery restarts the worker process. It is great way to free up all your memory in the heap but this would clear the cache. The problem with this is if the customer had 10 items in their shopping basket and that data was stored in the application cache, the user basket will now be empty forcing them either to get frustrated and go to a competitor website or if the customer is really patient, give it another try! How can you address this, well two ways of addressing this; 1. Workaround – A x86 bit processor only allows a maximum of 4GB of RAM, this means the machine effectively has around 3.4 GB of RAM available, the OS needs about 1.5 GB of RAM to run efficiently, the IIS and .net framework also need their share of memory, leaving you a heap of around 800 MB to play with. Because Team builds by default build your application in ‘Compile as any mode’ it means the application is build such that it will run in x86 bit mode if run on a x86 bit processor and run in a x64 bit mode if run on a x64 but processor. The problem with this is not all applications are really x64 bit compatible specially if you are using com objects or external libraries. So, as a quick win if you compiled your application in x86 bit mode by changing the compile as any selection to compile as x86 in the team build, you will be able to run your application on a x64 bit machine in x86 bit mode (WOW – By running Windows on Windows) and what that means is, you could use 8GB+ worth of RAM, if you take away everything else your application will roughly get a heap size of at least 4 GB to play with, which is immense. If you need a heap size of more than 4 GB you have either build a software for NASA or there is something fundamentally wrong in your application. 2. Solution – Now that you have put a workaround in place the IIS will not restart the worker process that regularly, which means you can take a breather and start working to get to the root cause of this memory leak. But this begs a question “How do I Identify possible memory leaks in my application?” Well i won’t say that there is one single tool that can tell you where the memory leak is, but trust me, ‘Performance Profiling’ is a great start point, it definitely gets you started in the right direction, let’s have a look at how. Performance Wizard - Start the Performance Wizard and select Instrumentation, this lets you measure function call counts and timings. Before running the performance session right click the performance session settings and chose properties from the context menu to bring up the Performance session properties page and as shown in the screen shot below, check the check boxes in the group ‘.NET memory profiling collection’ namely ‘Collect .NET object allocation information’ and ‘Also collect the .NET Object lifetime information’.    Now if you fire off the profiling session on your pages you will notice that the results allows you to view ‘Object Lifetime’ which shows you the number of objects that made it to Gen-0, Gen-1, Gen-2, Large heap, etc. Another great feature about the profile is that if your application has > 5% cases where objects die right after making to the Gen-2 storage a threshold alert is generated to alert you. Since you have the option to also view the most expensive methods and by capturing the IntelliTrace data you can drill in to narrow down to the line of code that is the root cause of the problem. Well now that we have seen how crucial memory management is and how easy Visual Studio Ultimate 2010 makes it for us to identify and reproduce the problem with the best of breed tools in the product. Caching One of the main ways to improve performance is Caching. Which basically means you tell the web server that instead of going to the database for each request you keep the data in the webserver and when the user asks for it you serve it from the webserver itself. BUT that can have consequences! Let’s look at some code, trust me caching code is not very intuitive, I define a cache key for almost all searches made through the common search page and cache the results. The approach works fine, first time i get the data from the database and second time data is served from the cache, significant performance improvement, EXCEPT when two users try to do the same operation and run into each other. But it is easy to handle this by adding the lock as you can see in the snippet below. So, as long as a user comes in and finds that the cache is empty, the user locks and starts to get the cache no more concurrency issues. But lets say you are processing 10 requests per second, by the time i have locked the operation to get the results from the database, 9 other users came in and found that the cache key is null so after i have come out and populated the cache they will still go in to get the results again. The application will still be faster because the next set of 10 users and so on would continue to get data from the cache. BUT if we added another null check after locking to build the cache and before actual call to the db then the 9 users who follow me would not make the extra trip to the database at all and that would really increase the performance, but didn’t i say that the code won’t be very intuitive, may be you should leave a comment you don’t want another developer to come in and think what a fresher why is he checking for the cache key null twice !!! The downside of caching is, you are storing the data outside of the database and the data could be wrong because the updates applied to the database would make the data cached at the web server out of sync. So, how do you invalidate the cache? Well if you only had one way of updating the data lets say only one entry point to the data update you can write some logic to say that every time new data is entered set the cache object to null. But this approach will not work as soon as you have several ways of feeding data to the system or your system is scaled out across a farm of web servers. The perfect solution to this is Micro Caching which means you cache the query for a set time duration and invalidate the cache after that set duration. The advantage is every time the user queries for that data with in the time span for which you have cached the results there are no calls made to the database and the data is served right from the server which makes the response immensely quick. Now figuring out the appropriate time span for which you micro cache the query results really depends on the application. Lets say your website gets 10 requests per second, if you retain the cache results for even 1 minute you will have immense performance gains. You would reduce 90% hits to the database for searching. Ever wondered why when you go to e-bookers.com or xpedia.com or yatra.com to book a flight and you click on the book button because the fare seems too exciting and you get an error message telling you that the fare is not valid any more. Yes, exactly => That is a cache failure! These travel sites or price compare engines are not going to hit the database every time you hit the compare button instead the results will be served from the cache, because the query results are micro cached, its a perfect trade-off, by micro caching the results the site gains 100% performance benefits but every once in a while annoys a customer because the fare has expired. But the trade off works in the favour of these sites as they are still able to process up to 30+ page requests per second which means cater to the site traffic by may be losing 1 customer every once in a while to a competitor who is also using a similar caching technique what are the odds that the user will not come back to their site sooner or later? Recap   Resources Below are some Key resource you might like to review. I would highly recommend the documentation, walkthroughs and videos available on MSDN. You can always make use of Fiddler to debug Web Performance Tests. Some community test extensions and plug ins available on Codeplex might also be of interest to you. The Road Ahead Thank you for taking the time out and reading this blog post, you may also want to read Part I and Part II if you haven’t so far. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Questions/Feedback/Suggestions, etc please leave a comment. Next ‘Load Testing in the cloud’, I’ll be working on exploring the possibilities of running Test controller/Agents in the Cloud. See you on the other side! Thank You!   Share this post : CodeProject

    Read the article

  • ASP.NET MVC 3 Hosting :: How to Deploy Web Apps Using ASP.NET MVC 3, Razor and EF Code First - Part I

    - by mbridge
    First, you can download the source code from http://efmvc.codeplex.com. The following frameworks will be used for this step by step tutorial. public class Category {     public int CategoryId { get; set; }     [Required(ErrorMessage = "Name Required")]     [StringLength(25, ErrorMessage = "Must be less than 25 characters")]     public string Name { get; set;}     public string Description { get; set; }     public virtual ICollection<Expense> Expenses { get; set; } } Expense Class public class Expense {             public int ExpenseId { get; set; }            public string  Transaction { get; set; }     public DateTime Date { get; set; }     public double Amount { get; set; }     public int CategoryId { get; set; }     public virtual Category Category { get; set; } }    Define Domain Model Let’s create domain model for our simple web application Category Class We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. In this post, we will be focusing on CRUD operations for the entity Category and will be working on the Expense entity with a View Model object in the later post. And the source code for this application will be refactored over time. The above entities are very simple POCO (Plain Old CLR Object) classes and the entity Category is decorated with validation attributes in the System.ComponentModel.DataAnnotations namespace. Now we want to use these entities for defining model objects for the Entity Framework 4. Using the Code First approach of Entity Framework, we can first define the entities by simply writing POCO classes without any coupling with any API or database library. This approach lets you focus on domain model which will enable Domain-Driven Development for applications. EF code first support is currently enabled with a separate API that is runs on top of the Entity Framework 4. EF Code First is reached CTP 5 when I am writing this article. Creating Context Class for Entity Framework We have created our domain model and let’s create a class in order to working with Entity Framework Code First. For this, you have to download EF Code First CTP 5 and add reference to the assembly EntitFramework.dll. You can also use NuGet to download add reference to EEF Code First. public class MyFinanceContext : DbContext {     public MyFinanceContext() : base("MyFinance") { }     public DbSet<Category> Categories { get; set; }     public DbSet<Expense> Expenses { get; set; }         }   The above class MyFinanceContext is derived from DbContext that can connect your model classes to a database. The MyFinanceContext class is mapping our Category and Expense class into database tables Categories and Expenses using DbSet<TEntity> where TEntity is any POCO class. When we are running the application at first time, it will automatically create the database. EF code-first look for a connection string in web.config or app.config that has the same name as the dbcontext class. If it is not find any connection string with the convention, it will automatically create database in local SQL Express database by default and the name of the database will be same name as the dbcontext class. You can also define the name of database in constructor of the the dbcontext class. Unlike NHibernate, we don’t have to use any XML based mapping files or Fluent interface for mapping between our model and database. The model classes of Code First are working on the basis of conventions and we can also use a fluent API to refine our model. The convention for primary key is ‘Id’ or ‘<class name>Id’.  If primary key properties are detected with type ‘int’, ‘long’ or ‘short’, they will automatically registered as identity columns in the database by default. Primary key detection is not case sensitive. We can define our model classes with validation attributes in the System.ComponentModel.DataAnnotations namespace and it automatically enforces validation rules when a model object is updated or saved. Generic Repository for EF Code First We have created model classes and dbcontext class. Now we have to create generic repository pattern for data persistence with EF code first. If you don’t know about the repository pattern, checkout Martin Fowler’s article on Repository Let’s create a generic repository to working with DbContext and DbSet generics. public interface IRepository<T> where T : class     {         void Add(T entity);         void Delete(T entity);         T GetById(long Id);         IEnumerable<T> All();     } RepositoryBasse – Generic Repository class protected MyFinanceContext Database {     get { return database ?? (database = DatabaseFactory.Get()); } } public virtual void Add(T entity) {     dbset.Add(entity);            }        public virtual void Delete(T entity) {     dbset.Remove(entity); }   public virtual T GetById(long id) {     return dbset.Find(id); }   public virtual IEnumerable<T> All() {     return dbset.ToList(); } } DatabaseFactory class public class DatabaseFactory : Disposable, IDatabaseFactory {     private MyFinanceContext database;     public MyFinanceContext Get()     {         return database ?? (database = new MyFinanceContext());     }     protected override void DisposeCore()     {         if (database != null)             database.Dispose();     } } Unit of Work If you are new to Unit of Work pattern, checkout Fowler’s article on Unit of Work . According to Martin Fowler, the Unit of Work pattern "maintains a list of objects affected by a business transaction and coordinates the writing out of changes and the resolution of concurrency problems." Let’s create a class for handling Unit of Work public interface IUnitOfWork {     void Commit(); } UniOfWork class public class UnitOfWork : IUnitOfWork {     private readonly IDatabaseFactory databaseFactory;     private MyFinanceContext dataContext;       public UnitOfWork(IDatabaseFactory databaseFactory)     {         this.databaseFactory = databaseFactory;     }       protected MyFinanceContext DataContext     {         get { return dataContext ?? (dataContext = databaseFactory.Get()); }     }       public void Commit()     {         DataContext.Commit();     } } The Commit method of the UnitOfWork will call the commit method of MyFinanceContext class and it will execute the SaveChanges method of DbContext class.   Repository class for Category In this post, we will be focusing on the persistence against Category entity and will working on other entities in later post. Let’s create a repository for handling CRUD operations for Category using derive from a generic Repository RepositoryBase<T>. public class CategoryRepository: RepositoryBase<Category>, ICategoryRepository     {     public CategoryRepository(IDatabaseFactory databaseFactory)         : base(databaseFactory)         {         }                } public interface ICategoryRepository : IRepository<Category> { } If we need additional methods than generic repository for the Category, we can define in the CategoryRepository. Dependency Injection using Unity 2.0 If you are new to Inversion of Control/ Dependency Injection or Unity, please have a look on my articles at http://weblogs.asp.net/shijuvarghese/archive/tags/IoC/default.aspx. I want to create a custom lifetime manager for Unity to store container in the current HttpContext. public class HttpContextLifetimeManager<T> : LifetimeManager, IDisposable {     public override object GetValue()     {         return HttpContext.Current.Items[typeof(T).AssemblyQualifiedName];     }     public override void RemoveValue()     {         HttpContext.Current.Items.Remove(typeof(T).AssemblyQualifiedName);     }     public override void SetValue(object newValue)     {         HttpContext.Current.Items[typeof(T).AssemblyQualifiedName] = newValue;     }     public void Dispose()     {         RemoveValue();     } } Let’s create controller factory for Unity in the ASP.NET MVC 3 application.                 404, String.Format(                     "The controller for path '{0}' could not be found" +     "or it does not implement IController.",                 reqContext.HttpContext.Request.Path));       if (!typeof(IController).IsAssignableFrom(controllerType))         throw new ArgumentException(                 string.Format(                     "Type requested is not a controller: {0}",                     controllerType.Name),                     "controllerType");     try     {         controller= container.Resolve(controllerType) as IController;     }     catch (Exception ex)     {         throw new InvalidOperationException(String.Format(                                 "Error resolving controller {0}",                                 controllerType.Name), ex);     }     return controller; }   } Configure contract and concrete types in Unity Let’s configure our contract and concrete types in Unity for resolving our dependencies. private void ConfigureUnity() {     //Create UnityContainer               IUnityContainer container = new UnityContainer()                 .RegisterType<IDatabaseFactory, DatabaseFactory>(new HttpContextLifetimeManager<IDatabaseFactory>())     .RegisterType<IUnitOfWork, UnitOfWork>(new HttpContextLifetimeManager<IUnitOfWork>())     .RegisterType<ICategoryRepository, CategoryRepository>(new HttpContextLifetimeManager<ICategoryRepository>());                 //Set container for Controller Factory                ControllerBuilder.Current.SetControllerFactory(             new UnityControllerFactory(container)); } In the above ConfigureUnity method, we are registering our types onto Unity container with custom lifetime manager HttpContextLifetimeManager. Let’s call ConfigureUnity method in the Global.asax.cs for set controller factory for Unity and configuring the types with Unity. protected void Application_Start() {     AreaRegistration.RegisterAllAreas();     RegisterGlobalFilters(GlobalFilters.Filters);     RegisterRoutes(RouteTable.Routes);     ConfigureUnity(); } Developing web application using ASP.NET MVC 3 We have created our domain model for our web application and also have created repositories and configured dependencies with Unity container. Now we have to create controller classes and views for doing CRUD operations against the Category entity. Let’s create controller class for Category Category Controller public class CategoryController : Controller {     private readonly ICategoryRepository categoryRepository;     private readonly IUnitOfWork unitOfWork;           public CategoryController(ICategoryRepository categoryRepository, IUnitOfWork unitOfWork)     {         this.categoryRepository = categoryRepository;         this.unitOfWork = unitOfWork;     }       public ActionResult Index()     {         var categories = categoryRepository.All();         return View(categories);     }     [HttpGet]     public ActionResult Edit(int id)     {         var category = categoryRepository.GetById(id);         return View(category);     }       [HttpPost]     public ActionResult Edit(int id, FormCollection collection)     {         var category = categoryRepository.GetById(id);         if (TryUpdateModel(category))         {             unitOfWork.Commit();             return RedirectToAction("Index");         }         else return View(category);                 }       [HttpGet]     public ActionResult Create()     {         var category = new Category();         return View(category);     }           [HttpPost]     public ActionResult Create(Category category)     {         if (!ModelState.IsValid)         {             return View("Create", category);         }                     categoryRepository.Add(category);         unitOfWork.Commit();         return RedirectToAction("Index");     }       [HttpPost]     public ActionResult Delete(int  id)     {         var category = categoryRepository.GetById(id);         categoryRepository.Delete(category);         unitOfWork.Commit();         var categories = categoryRepository.All();         return PartialView("CategoryList", categories);       }        } Creating Views in Razor Now we are going to create views in Razor for our ASP.NET MVC 3 application.  Let’s create a partial view CategoryList.cshtml for listing category information and providing link for Edit and Delete operations. CategoryList.cshtml @using MyFinance.Helpers; @using MyFinance.Domain; @model IEnumerable<Category>      <table>         <tr>         <th>Actions</th>         <th>Name</th>          <th>Description</th>         </tr>     @foreach (var item in Model) {             <tr>             <td>                 @Html.ActionLink("Edit", "Edit",new { id = item.CategoryId })                 @Ajax.ActionLink("Delete", "Delete", new { id = item.CategoryId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divCategoryList" })                           </td>             <td>                 @item.Name             </td>             <td>                 @item.Description             </td>         </tr>         }       </table>     <p>         @Html.ActionLink("Create New", "Create")     </p> The delete link is providing Ajax functionality using the Ajax.ActionLink. This will call an Ajax request for Delete action method in the CategoryCotroller class. In the Delete action method, it will return Partial View CategoryList after deleting the record. We are using CategoryList view for the Ajax functionality and also for Index view using for displaying list of category information. Let’s create Index view using partial view CategoryList  Index.chtml @model IEnumerable<MyFinance.Domain.Category> @{     ViewBag.Title = "Index"; }    <h2>Category List</h2>    <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script>    <div id="divCategoryList">               @Html.Partial("CategoryList", Model) </div> We can call the partial views using Html.Partial helper method. Now we are going to create View pages for insert and update functionality for the Category. Both view pages are sharing common user interface for entering the category information. So I want to create an EditorTemplate for the Category information. We have to create the EditorTemplate with the same name of entity object so that we can refer it on view pages using @Html.EditorFor(model => model) . So let’s create template with name Category. Category.cshtml @model MyFinance.Domain.Category <div class="editor-label"> @Html.LabelFor(model => model.Name) </div> <div class="editor-field"> @Html.EditorFor(model => model.Name) @Html.ValidationMessageFor(model => model.Name) </div> <div class="editor-label"> @Html.LabelFor(model => model.Description) </div> <div class="editor-field"> @Html.EditorFor(model => model.Description) @Html.ValidationMessageFor(model => model.Description) </div> Let’s create view page for insert Category information @model MyFinance.Domain.Category   @{     ViewBag.Title = "Save"; }   <h2>Create</h2>   <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script>   @using (Html.BeginForm()) {     @Html.ValidationSummary(true)     <fieldset>         <legend>Category</legend>                @Html.EditorFor(model => model)               <p>             <input type="submit" value="Create" />         </p>     </fieldset> }   <div>     @Html.ActionLink("Back to List", "Index") </div> ViewStart file In Razor views, we can add a file named _viewstart.cshtml in the views directory  and this will be shared among the all views with in the Views directory. The below code in the _viewstart.cshtml, sets the Layout page for every Views in the Views folder.     @{     Layout = "~/Views/Shared/_Layout.cshtml"; } Tomorrow, we will cotinue the second part of this article. :)

    Read the article

  • Microsoft Declares the Future of ASP.NET is Web API

    - by sbwalker
    Sitting on a plane on my way home from Tech Ed 2012 in Orlando, I thought it would be a good time to jot down some key takeaways from this year’s conference. Some of these items I have known since the Microsoft MVP Summit which occurred in Redmond in late February ( but due to NDA restrictions I could not share them with the developer community at large ) and some of them are a result of insightful conversations with a wide variety of industry insiders and Microsoft employees at the conference. First, let’s travel back in time 4 years to the Microsoft MVP Summit in 2008. Microsoft was facing some heat from market newcomer Ruby on Rails and responded with a new web development framework of its own, ASP.NET MVC. At the Summit they estimated that MVC would only be applicable for ~10% of all new web development projects. Based on that prediction I questioned why they were investing such considerable resources for such a relative edge case, but my guess is that they felt it was an important edge case at the time as some of the more vocal .NET evangelists as well as some very high profile start-ups ( ie. Twitter ) had publicly announced their intent to use Rails. Microsoft made a lot of noise about MVC. In fact, they focused so much of their messaging and marketing hype around MVC that it appeared that WebForms was essentially dead. Yes, it may have been true that Microsoft continued to invest in WebForms, but from an outside perspective it really appeared that MVC was the only framework getting any real attention. As a result, MVC started to gain market share. An inside source at Microsoft told me that MVC usage has grown at a rate of about 5% per year and now sits at ~30%. Essentially by focusing so much marketing effort on MVC, Microsoft actually created a larger market demand for it.  This is because in the Microsoft ecosystem there is somewhat of a bandwagon mentality amongst developers. If Microsoft spends a lot of time talking about a specific technology, developers get the perception that it must be really important. So rather than choosing the right tool for the job, they often choose the tool with the most marketing hype and then try to sell it to the customer. In 2010, I blogged about the fact that MVC did not make any business sense for the DotNetNuke platform. This was because our ecosystem relied on third party extensions which were dependent on the WebForms model. If we migrated the core to MVC it would mean that all of the third party extensions would no longer be compatible, which would be an irresponsible business decision for us to make at the expense of our users and customers. However, this did not stop the debate from continuing to occur in our ecosystem. Clearly some developers had drunk Microsoft’s Kool-Aid about MVC and were of the mindset, to paraphrase an old Scottish saying, “If its not MVC, it’s crap”. Now, this is a rather ignorant position to take as most of the benefits of MVC can be achieved in WebForms with solid architecture and responsible coding practices. Clean separation of concerns, unit testing, and direct control over page output are all possible in the WebForms model – it just requires diligence and discipline. So over the past few years some horror stories have begun to bubble to the surface of software development projects focused on ground-up rewrites of web applications for the sole purpose of migrating from WebForms to MVC. These large scale rewrites were typically initiated by engineering teams with only a single argument driving the business decision, that Microsoft was promoting MVC as “the future”. These ill-fated rewrites offered no benefit to end users or customers and in fact resulted in a less stable, less scalable and more complicated systems – basically taking one step forward and two full steps back. A case in point is the announcement earlier this week that a popular open source .NET CMS provider has decided to pull the plug on their new MVC product which has been under active development for more than 18 months and revert back to WebForms. The availability of multiple server-side development models has deeply fragmented the Microsoft developer community. Some folks like to compare it to the age-old VB vs. C# language debate. However, the VB vs. C# language debate was ultimately more of a religious war because at least the two dominant programming languages were compatible with one another and could be used interchangeably. The issue with WebForms vs. MVC is much more challenging. This is because the messaging from Microsoft has positioned the two solutions as being incompatible with one another and as a result web developers feel like they are forced to choose one path or another. Yes, it is true that it has always been technically possible to use WebForms and MVC in the same project, but the tooling support has always made this feel “dirty”. The fragmentation has also made it difficult to attract newcomers as the perceived barrier to entry for learning ASP.NET has become higher. As a result many new software developers entering the market are gravitating to environments where the development model seems more simple and intuitive ( ie. PHP or Ruby ). At the same time that the Web Platform team was busy promoting ASP.NET MVC, the Microsoft Office team has been promoting Sharepoint as a platform for building internal enterprise web applications. Sharepoint has great penetration in the enterprise and over time has been enhanced with improved extensibility capabilities for software developers. But, like many other mature enterprise ASP.NET web applications, it is built on the WebForms development model. Similar to DotNetNuke, Sharepoint leverages a rich third party ecosystem for both generic web controls and more specialized WebParts – both of which rely on WebForms. So basically this resulted in a situation where the Web Platform group had headed off in one direction and the Office team had gone in another direction, and the end customer was stuck in the middle trying to figure out what to do with their existing investments in Microsoft technology. It really emphasized the perception that the left hand was not speaking to the right hand, as strategically speaking there did not seem to be any high level plan from Microsoft to ensure consistency and continuity across the different product lines. With the introduction of ASP.NET MVC, it also made some of the third party control vendors scratch their heads, and wonder what the heck Microsoft was thinking. The original value proposition of ASP.NET over Classic ASP was the ability for web developers to emulate the highly productive desktop development model by using abstract components for creating rich, interactive web interfaces. Web control vendors like Telerik, Infragistics, DevExpress, and ComponentArt had all built sizable businesses offering powerful user interface components to WebForms developers. And even after MVC was introduced these vendors continued to improve their products, offering greater productivity and a superior user experience via AJAX to what was possible in MVC. And since many developers were comfortable and satisfied with these third party solutions, the demand remained strong and the third party web control market continued to prosper despite the availability of MVC. While all of this was going on in the Microsoft ecosystem, there has also been a fundamental shift in the general software development industry. Driven by the explosion of Internet-enabled devices, the focus has now centered on service-oriented architecture (SOA). Service-oriented architecture is all about defining a public API for your product that any client can consume; whether it’s a native application running on a smart phone or tablet, a web browser taking advantage of HTML5 and Javascript, or a rich desktop application running on a PC. REST-based services which utilize the less verbose characteristics of JSON as a transport mechanism, have become the preferred approach over older, more bloated SOAP-based techniques. SOA also has the benefit of producing a cross-platform API, as every major technology stack is able to interact with standard REST-based web services. And for web applications, more and more developers are turning to robust Javascript libraries like JQuery and Knockout for browser-based client-side development techniques for calling web services and rendering content to end users. In fact, traditional server-side page rendering has largely fallen out of favor, resulting in decreased demand for server-side frameworks like Ruby on Rails, WebForms, and (gasp) MVC. In response to these new industry trends, Microsoft did what it always does – it immediately poured some resources into developing a solution which will ensure they remain relevant and competitive in the web space. This work culminated in a new framework which was branded as Web API. It is convention-based and designed to embrace native HTTP standards without copious layers of abstraction. This framework is designed to be the ultimate replacement for both the REST aspects of WCF and ASP.NET MVC Web Services. And since it was developed out of band with a dependency only on ASP.NET 4.0, it means that it can be used immediately in a variety of production scenarios. So at Tech Ed 2012 it was made abundantly clear in numerous sessions that Microsoft views Web API as the “Future of ASP.NET”. In fact, one Microsoft PM even went as far as to say that if we look 3-4 years into the future, that all ASP.NET web applications will be developed using the Web API approach. This is a fairly bold prediction and clearly telegraphs where Microsoft plans to allocate its resources going forward. Currently Web API is being delivered as part of the MVC4 package, but this is only temporary for the sake of convenience. It also sounds like there are still internal discussions going on in terms of how to brand the various aspects of ASP.NET going forward – perhaps the moniker of “ASP.NET Web Stack” coined a couple years ago by Scott Hanselman and utilized as part of the open source release of ASP.NET bits on Codeplex a few months back will eventually stick. Web API is being positioned as the unification of ASP.NET – the glue that is able to pull this fragmented mess back together again. The  “One ASP.NET” strategy will promote the use of all frameworks - WebForms, MVC, and Web API, even within the same web project. Basically the message is utilize the appropriate aspects of each framework to solve your business problems. Instead of navigating developers to a fork in the road, the plan is to educate them that “hybrid” applications are a great strategy for delivering solutions to customers. In addition, the service-oriented approach coupled with client-side development promoted by Web API can effectively be used in both WebForms and MVC applications. So this means it is also relevant to application platforms like DotNetNuke and Sharepoint, which means that it starts to create a unified development strategy across all ASP.NET product lines once again. And so what about MVC? There have actually been rumors floated that MVC has reached a stage of maturity where, similar to WebForms, it will be treated more as a maintenance product line going forward ( MVC4 may in fact be the last significant iteration of this framework ). This may sound alarming to some folks who have recently adopted MVC but it really shouldn’t, as both WebForms and MVC will continue to play a vital role in delivering solutions to customers. They will just not be the primary area where Microsoft is spending the majority of its R&D resources. That distinction will obviously go to Web API. And when the question comes up of why not enhance MVC to make it work with Web API, you must take a step back and look at this from the higher level to see that it really makes no sense. MVC is a server-side page compositing framework; whereas, Web API promotes client-side page compositing with a heavy focus on web services. In order to make MVC work well with Web API, would require a complete rewrite of MVC and at the end of the day, there would be no upgrade path for existing MVC applications. So it really does not make much business sense. So what does this have to do with DotNetNuke? Well, around 8-12 months ago we recognized the software industry trends towards web services and client-side development. We decided to utilize a “hybrid” model which would provide compatibility for existing modules while at the same time provide a bridge for developers who wanted to utilize more modern web techniques. Customers who like the productivity and familiarity of WebForms can continue to build custom modules using the traditional approach. However, in DotNetNuke 6.2 we also introduced a new Service Framework which is actually built on top of MVC2 ( we chose to leverage MVC because it had the most intuitive, light-weight REST implementation in the .NET stack ). The Services Framework allowed us to build some rich interactive features in DotNetNuke 6.2, including the Messaging and Notification Center and Activity Feed. But based on where we know Microsoft is heading, it makes sense for the next major version of DotNetNuke ( which is expected to be released in Q4 2012 ) to migrate from MVC2 to Web API. This will likely result in some breaking changes in the Services Framework but we feel it is the best approach for ensuring the platform remains highly modern and relevant. The fact that our development strategy is perfectly aligned with the “One ASP.NET” strategy from Microsoft means that our customers and developer community can be confident in their current and future investments in the DotNetNuke platform.

    Read the article

  • VS 2012 Code Review &ndash; Before Check In OR After Check In?

    - by Tarun Arora
    “Is Code Review Important and Effective?” There is a consensus across the industry that code review is an effective and practical way to collar code inconsistency and possible defects early in the software development life cycle. Among others some of the advantages of code reviews are, Bugs are found faster Forces developers to write readable code (code that can be read without explanation or introduction!) Optimization methods/tricks/productive programs spread faster Programmers as specialists "evolve" faster It's fun “Code review is systematic examination (often known as peer review) of computer source code. It is intended to find and fix mistakes overlooked in the initial development phase, improving both the overall quality of software and the developers' skills. Reviews are done in various forms such as pair programming, informal walkthroughs, and formal inspections.” Wikipedia No where does the definition mention whether its better to review code before the code has been committed to version control or after the commit has been performed. No matter which side you favour, Visual Studio 2012 allows you to request for a code review both before check in and also request for a review after check in. Let’s weigh the pros and cons of the approaches independently. Code Review Before Check In or Code Review After Check In? Approach 1 – Code Review before Check in Developer completes the code and feels the code quality is appropriate for check in to TFS. The developer raises a code review request to have a second pair of eyes validate if the code abides to the recommended best practices, will not result in any defects due to common coding mistakes and whether any optimizations can be made to improve the code quality.                                             Image 1 – code review before check in Pros Everything that gets committed to source control is reviewed. Minimizes the chances of smelly code making its way into the code base. Decreases the cost of fixing bugs, remember, the earlier you find them, the lesser the pain in fixing them. Cons Development Code Freeze – Since the changes aren’t in the source control yet. Further development can only be done off-line. The changes have not been through a CI build, hard to say whether the code abides to all build quality standards. Inconsistent! Cumbersome to track the actual code review process.  Not every change to the code base is worth reviewing, a lot of effort is invested for very little gain. Approach 2 – Code Review after Check in Developer checks in, random code reviews are performed on the checked in code.                                                      Image 2 – Code review after check in Pros The code has already passed the CI build and run through any code analysis plug ins you may have running on the build server. Instruct the developer to ensure ZERO fx cop, style cop and static code analysis before check in. Code is cleaner and smell free even before the code review. No Offline development, developers can continue to develop against the source control. Cons Bad code can easily make its way into the code base. Since the review take place much later in the cycle, the cost of fixing issues can prove to be much higher. Approach 3 – Hybrid Approach The community advocates a more hybrid approach, a blend of tooling and human accountability quotient.                                                               Image 3 – Hybrid Approach 1. Code review high impact check ins. It is not possible to review everything, by setting up code review check in policies you can end up slowing your team. More over, the code that you are reviewing before check in hasn't even been through a green CI build either. 2. Tooling. Let the tooling work for you. By running static analysis, fx cop, style cop and other plug ins on the build agent, you can identify the real issues that in my opinion can't possibly be identified using human reviews. Configure the tooling to report back top 10 issues every day. Mandate the manual code review of individuals who keep making it to this list of shame more often. 3. During Merge. I would prefer eliminating some of the other code issues during merge from Main branch to the release branch. In a scrum project this is still easier because cheery picking the merges is a possibility and the size of code being reviewed is still limited. Let the tooling work for you, if some one breaks the CI build often, put them on a gated check in build course until you see improvement. If some one appears on the top 10 list of shame generated via the build then ensure that all their code is reviewed till you see improvement. At the end of the day, the goal is to ensure that the code being delivered is top quality. By enforcing a code review before any check in, you force the developer to work offline or stay put till the review is complete. What do the experts say? So I asked a few expects what they thought of “Code Review quality gate before Checking in code?" Terje Sandstrom | Microsoft ALM MVP You mean a review quality gate BEFORE checking in code????? That would mean a lot of code staying either local or in shelvesets, and not even been through a CI build, and a green CI build being the main criteria for going further, f.e. to the review state. I would not like code laying around with no checkin’s. Having a requirement that code is checked in small pieces, 4-8 hours work max, and AT LEAST daily checkins, a manual code review comes second down the lane. I would expect review quality gates to happen before merging back to main, or before merging to release.  But that would all be on checked-in code.  Branching is absolutely one way to ease the pain.   Another way we are using is automatic quality builds, running metrics, coverage, static code analysis.  Unfortunately it takes some time, would be great to be on CI’s – but…., so it’s done scheduled every night. Based on this we get, among other stuff,  top 10 lists of suspicious code, which is then subjected to reviews.  If a person seems to be very popular on these top 10 lists, we subject every check in from that person to a review for a period. That normally helps.   None of the clients I have can afford to have every checkin reviewed, so we need to find ways around it. I don’t disagree with the nicety of having all the code reviewed, but I find it hard to find those resources in today’s enterprises. David V. Corbin | Visual Studio ALM Ranger I tend to agree with both sides. I hate having code that is not checked in, but at the same time hate having “bad” code in the repository. I have found that branching is one approach to solving this dilemma. Code is checked into the private/feature branch before the review, but is not merged over to the “official” branch until after the review. I advocate both, depending on circumstance (especially team dynamics)   - The “pre-checkin” is usually for elements that may impact the project as a whole. Think of it as another “gate” along with passing unit tests. - The “post-checkin” may very well not be at the changeset level, but correlates to a review at the “user story” level.   Again, this depends on team dynamics in play…. Robert MacLean | Microsoft ALM MVP I do not think there is no right answer for the industry as a whole. In short the question is why do you do reviews? Your question implies risk mitigation, so in low risk areas you can get away with it after check in while in high risk you need to do it before check in. An example is those new to a team or juniors need it much earlier (maybe that is before checkin, maybe that is soon after) than seniors who have shipped twenty sprints on the team. Abhimanyu Singhal | Visual Studio ALM Ranger Depends on per scenario basis. We recommend post check-in reviews when: 1. We don't want to block other checks and processes on manual code reviews. Manual reviews take time, and some pieces may not require manual reviews at all. 2. We need to trace all changes and track history. 3. We have a code promotion strategy/process in place. For risk mitigation, post checkin code can be promoted to Accepted branches. Or can be rejected. Pre Checkin Reviews are used when 1. There is a high risk factor associated 2. Reviewers are generally (most of times) have immediate availability. 3. Team does not have strict tracking needs. Simply speaking, no single process fits all scenarios. You need to select what works best for your team/project. Thomas Schissler | Visual Studio ALM Ranger This is an interesting discussion, I’m right now discussing details about executing code reviews with my teams. I see and understand the aspects you brought in, but there is another side as well, I’d like to point out. 1.) If you do reviews per check in this is not very practical as a hard rule because this will disturb the flow of the team very often or it will lead to reduce the checkin frequency of the devs which I would not accept. 2.) If you do later reviews, for example if you review PBIs, it is not easy to find out which code you should review. Either you review all changesets associate with the PBI, but then you might review code which has been changed with a later checkin and the dev maybe has already fixed the issue. Or you review the diff of the latest changeset of the PBI with the first but then you might also review changes of other PBIs. Jakob Leander | Sr. Director, Avanade In my experience, manual code review: 1. Does not get done and at the very least does not get redone after changes (regardless of intentions at start of project) 2. When a project actually do it, they often do not do it right away = errors pile up 3. Requires a lot of time discussing/defining the standard and for the team to learn it However code review is very important since e.g. even small memory leaks in a high volume web solution have big consequences In the last years I have advocated following approach for code review - Architects up front do “at least one best practice example” of each type of component and tell the team. Copy from this one. This should include error handling, logging, security etc. - Dev lead on project continuously browse code to validate that the best practices are used. Especially that patterns etc. are not broken. You can do this formally after each sprint/iteration if you want. Once this is validated it is unlikely to “go bad” even during later code changes Agree with customer to rely on static code analysis from Visual Studio as the one and only coding standard. This has HUUGE benefits - You can easily tweak to reach the level you desire together with customer - It is easy to measure for both developers/management - It is 100% consistent across code base - It gets validated all the time so you never end up getting hammered by a customer review in the end - It is easy to tell the developer that you do not want code back unless it has zero errors = minimize communication You need to track this at least during nightly builds and make sure team sees total # issues. Do not allow #issues it to grow uncontrolled. On the project I run I require code analysis to have run on code before checkin (checkin rule). This means -  You have to have clean compile (or CA wont run) so this is extra benefit = very few broken builds - You can change a few of the rules to compile as errors instead of warnings. I often do this for “missing dispose” issues which you REALLY do not want in your app Tip: Place your custom CA rules files as part of solution. That  way it works when you do branching etc. (path to CA file is relative in VS) Some may argue that CA is not as good as manual inspection. But since manual inspection in reality suffers from the 3 issues in start it is IMO a MUCH better (and much cheaper) approach from helicopter perspective Tirthankar Dutta | Director, Avanade I think code review should be run both before and after check ins. There are some code metrics that are meant to be run on the entire codebase … Also, especially on multi-site projects, one should strive to architect in a way that lets men manage the framework while boys write the repetitive code… scales very well with the need to review less by containment and imposing architectural restrictions to emphasise the design. Bruno Capuano | Microsoft ALM MVP For code reviews (means peer reviews) in distributed team I use http://www.vsanywhere.com/default.aspx  David Jobling | Global Sr. Director, Avanade Peer review is the only way to scale and its a great practice for all in the team to learn to perform and accept. In my experience you soon learn who's code to watch more than others and tune the attention. Mikkel Toudal Kristiansen | Manager, Avanade If you have several branches in your code base, you will need to merge often. This requires manual merging, when a file has been changed in both branches. It offers a good opportunity to actually review to changed code. So my advice is: Merging between branches should be done as often as possible, it should be done by a senior developer, and he/she should perform a full code review of the code being merged. As for detecting architectural smells and code smells creeping into the code base, one really good third party tools exist: Ndepend (http://www.ndepend.com/, for static code analysis of the current state of the code base). You could also consider adding StyleCop to the solution. Jesse Houwing | Visual Studio ALM Ranger I gave a presentation on this subject on the TechDays conference in NL last year. See my presentation and slides here (talk in Dutch, but English presentation): http://blog.jessehouwing.nl/2012/03/did-you-miss-my-techdaysnl-talk-on-code.html  I’d like to add a few more points: - Before/After checking is mostly a trust issue. If you have a team that does diligent peer reviews and regularly talk/sit together or peer review, there’s no need to enforce a before-checkin policy. The peer peer-programming and regular feedback during development can take care of most of the review requirements as long as the team isn’t under stress. - Under stress, enforce pre-checkin reviews, it might sound strange, if you’re already under time or budgetary constraints, but it is under such conditions most real issues start to be created or pile up. - Use tools to catch most common errors, Code Analysis/FxCop was already mentioned. HP Fortify, Resharper, Coderush etc can help you there. There are also a lot of 3rd party rules you can add to Code Analysis. I’ve written a few myself (http://fccopcontrib.codeplex.com) and various teams from Microsoft have added their own rules (MSOCAF for SharePoint, WSSF for WCF). For common errors that keep cropping up, see if you can define a rule. It’s much easier. But more importantly make sure you have a good help page explaining *WHY* it's wrong. If you have small feature or developer branches/shelvesets, you might want to review pre-merge. It’s still better to do peer reviews and peer programming, but the most important thing is that bad quality code doesn’t make it into the important branch. So my philosophy: - Use tooling as much as possible. - Make sure the team understands the tooling and the importance of the things it flags. It’s too easy to just click suppress all to ignore the warnings. - Under stress, tighten process, it’s under stress that the problems of late reviews will really surface - Most importantly if you do reviews do them as early as possible, but never later than needed. In other words, pre-checkin/post checking doesn’t really matter, as long as the review is done before the code is released. It’ll just be much more expensive to fix any review outcomes the later you find them. --- I would love to hear what you think!

    Read the article

  • NoSQL with RavenDB and ASP.NET MVC - Part 1

    - by shiju
     A while back, I have blogged NoSQL with MongoDB, NoRM and ASP.NET MVC Part 1 and Part 2 on how to use MongoDB with an ASP.NET MVC application. The NoSQL movement is getting big attention and RavenDB is the latest addition to the NoSQL and document database world. RavenDB is an Open Source (with a commercial option) document database for the .NET/Windows platform developed  by Ayende Rahien.  Raven stores schema-less JSON documents, allow you to define indexes using Linq queries and focus on low latency and high performance. RavenDB is .NET focused document database which comes with a fully functional .NET client API  and supports LINQ. RavenDB comes with two components, a server and a client API. RavenDB is a REST based system, so you can write your own HTTP cleint API. As a .NET developer, RavenDB is becoming my favorite document database. Unlike other document databases, RavenDB is supports transactions using System.Transactions. Also it's supports both embedded and server mode of database. You can access RavenDB site at http://ravendb.netA demo App with ASP.NET MVCLet's create a simple demo app with RavenDB and ASP.NET MVC. To work with RavenDB, do the following steps. Go to http://ravendb.net/download and download the latest build.Unzip the downloaded file.Go to the /Server directory and run the RavenDB.exe. This will start the RavenDB server listening on localhost:8080You can change the port of RavenDB  by modifying the "Raven/Port" appSetting value in the RavenDB.exe.config file.When running the RavenDB, it will automatically create a database in the /Data directory. You can change the directory name data by modifying "Raven/DataDirt" appSetting value in the RavenDB.exe.config file.RavenDB provides a browser based admin tool. When the Raven server is running, You can be access the browser based admin tool and view and edit documents and index using your browser admin tool. The web admin tool available at http://localhost:8080The below is the some screen shots of web admin tool     Working with ASP.NET MVC  To working with RavenDB in our demo ASP.NET MVC application, do the following steps Step 1 - Add reference to Raven Cleint API In our ASP.NET MVC application, Add a reference to the Raven.Client.Lightweight.dll from the Client directory. Step 2 - Create DocumentStoreThe document store would be created once per application. Let's create a DocumentStore on application start-up in the Global.asax.cs. documentStore = new DocumentStore { Url = "http://localhost:8080/" }; documentStore.Initialise(); The above code will create a Raven DB document store and will be listening the server locahost at port 8080    Step 3 - Create DocumentSession on BeginRequest   Let's create a DocumentSession on BeginRequest event in the Global.asax.cs. We are using the document session for every unit of work. In our demo app, every HTTP request would be a single Unit of Work (UoW). BeginRequest += (sender, args) =>   HttpContext.Current.Items[RavenSessionKey] = documentStore.OpenSession(); Step 4 - Destroy the DocumentSession on EndRequest  EndRequest += (o, eventArgs) => {     var disposable = HttpContext.Current.Items[RavenSessionKey] as IDisposable;     if (disposable != null)         disposable.Dispose(); };  At the end of HTTP request, we are destroying the DocumentSession  object.The below  code block shown all the code in the Global.asax.cs  private const string RavenSessionKey = "RavenMVC.Session"; private static DocumentStore documentStore;   protected void Application_Start() { //Create a DocumentStore in Application_Start //DocumentStore should be created once per application and stored as a singleton. documentStore = new DocumentStore { Url = "http://localhost:8080/" }; documentStore.Initialise(); AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); //DI using Unity 2.0 ConfigureUnity(); }   public MvcApplication() { //Create a DocumentSession on BeginRequest   //create a document session for every unit of work BeginRequest += (sender, args) =>     HttpContext.Current.Items[RavenSessionKey] = documentStore.OpenSession(); //Destroy the DocumentSession on EndRequest EndRequest += (o, eventArgs) => { var disposable = HttpContext.Current.Items[RavenSessionKey] as IDisposable; if (disposable != null) disposable.Dispose(); }; }   //Getting the current DocumentSession public static IDocumentSession CurrentSession {   get { return (IDocumentSession)HttpContext.Current.Items[RavenSessionKey]; } }  We have setup all necessary code in the Global.asax.cs for working with RavenDB. For our demo app, Let’s write a domain class  public class Category {       public string Id { get; set; }       [Required(ErrorMessage = "Name Required")]     [StringLength(25, ErrorMessage = "Must be less than 25 characters")]     public string Name { get; set;}     public string Description { get; set; }   } We have created simple domain entity Category. Let's create repository class for performing CRUD operations against our domain entity Category.  public interface ICategoryRepository {     Category Load(string id);     IEnumerable<Category> GetCategories();     void Save(Category category);     void Delete(string id);       }    public class CategoryRepository : ICategoryRepository {     private IDocumentSession session;     public CategoryRepository()     {             session = MvcApplication.CurrentSession;     }     //Load category based on Id     public Category Load(string id)     {         return session.Load<Category>(id);     }     //Get all categories     public IEnumerable<Category> GetCategories()     {         var categories= session.LuceneQuery<Category>()                 .WaitForNonStaleResults()             .ToArray();         return categories;       }     //Insert/Update category     public void Save(Category category)     {         if (string.IsNullOrEmpty(category.Id))         {             //insert new record             session.Store(category);         }         else         {             //edit record             var categoryToEdit = Load(category.Id);             categoryToEdit.Name = category.Name;             categoryToEdit.Description = category.Description;         }         //save the document session         session.SaveChanges();     }     //delete a category     public void Delete(string id)     {         var category = Load(id);         session.Delete<Category>(category);         session.SaveChanges();     }        } For every CRUD operations, we are taking the current document session object from HttpContext object. session = MvcApplication.CurrentSession; We are calling the static method CurrentSession from the Global.asax.cs public static IDocumentSession CurrentSession {     get { return (IDocumentSession)HttpContext.Current.Items[RavenSessionKey]; } }  Retrieve Entities  The Load method get the single Category object based on the Id. RavenDB is working based on the REST principles and the Id would be like categories/1. The Id would be created by automatically when a new object is inserted to the document store. The REST uri categories/1 represents a single category object with Id representation of 1.   public Category Load(string id) {    return session.Load<Category>(id); } The GetCategories method returns all the categories calling the session.LuceneQuery method. RavenDB is using a lucen query syntax for querying. I will explain more details about querying and indexing in my future posts.   public IEnumerable<Category> GetCategories() {     var categories= session.LuceneQuery<Category>()             .WaitForNonStaleResults()         .ToArray();     return categories;   } Insert/Update entityFor insert/Update a Category entity, we have created Save method in repository class. If  the Id property of Category is null, we call Store method of Documentsession for insert a new record. For editing a existing record, we load the Category object and assign the values to the loaded Category object. The session.SaveChanges() will save the changes to document store.  //Insert/Update category public void Save(Category category) {     if (string.IsNullOrEmpty(category.Id))     {         //insert new record         session.Store(category);     }     else     {         //edit record         var categoryToEdit = Load(category.Id);         categoryToEdit.Name = category.Name;         categoryToEdit.Description = category.Description;     }     //save the document session     session.SaveChanges(); }  Delete Entity  In the Delete method, we call the document session's delete method and call the SaveChanges method to reflect changes in the document store.  public void Delete(string id) {     var category = Load(id);     session.Delete<Category>(category);     session.SaveChanges(); }  Let’s create ASP.NET MVC controller and controller actions for handling CRUD operations for the domain class Category  public class CategoryController : Controller { private ICategoryRepository categoyRepository; //DI enabled constructor public CategoryController(ICategoryRepository categoyRepository) {     this.categoyRepository = categoyRepository; } public ActionResult Index() {         var categories = categoyRepository.GetCategories();     if (categories == null)         return RedirectToAction("Create");     return View(categories); }   [HttpGet] public ActionResult Edit(string id) {     var category = categoyRepository.Load(id);         return View("Save",category); } // GET: /Category/Create [HttpGet] public ActionResult Create() {     var category = new Category();     return View("Save", category); } [HttpPost] public ActionResult Save(Category category) {     if (!ModelState.IsValid)     {         return View("Save", category);     }           categoyRepository.Save(category);         return RedirectToAction("Index");     }        [HttpPost] public ActionResult Delete(string id) {     categoyRepository.Delete(id);     var categories = categoyRepository.GetCategories();     return PartialView("CategoryList", categories);      }        }  RavenDB is an awesome document database and I hope that it will be the winner in .NET space of document database world.  The source code of demo application available at http://ravenmvc.codeplex.com/

    Read the article

  • Toorcon14

    - by danx
    Toorcon 2012 Information Security Conference San Diego, CA, http://www.toorcon.org/ Dan Anderson, October 2012 It's almost Halloween, and we all know what that means—yes, of course, it's time for another Toorcon Conference! Toorcon is an annual conference for people interested in computer security. This includes the whole range of hackers, computer hobbyists, professionals, security consultants, press, law enforcement, prosecutors, FBI, etc. We're at Toorcon 14—see earlier blogs for some of the previous Toorcon's I've attended (back to 2003). This year's "con" was held at the Westin on Broadway in downtown San Diego, California. The following are not necessarily my views—I'm just the messenger—although I could have misquoted or misparaphrased the speakers. Also, I only reviewed some of the talks, below, which I attended and interested me. MalAndroid—the Crux of Android Infections, Aditya K. Sood Programming Weird Machines with ELF Metadata, Rebecca "bx" Shapiro Privacy at the Handset: New FCC Rules?, Valkyrie Hacking Measured Boot and UEFI, Dan Griffin You Can't Buy Security: Building the Open Source InfoSec Program, Boris Sverdlik What Journalists Want: The Investigative Reporters' Perspective on Hacking, Dave Maas & Jason Leopold Accessibility and Security, Anna Shubina Stop Patching, for Stronger PCI Compliance, Adam Brand McAfee Secure & Trustmarks — a Hacker's Best Friend, Jay James & Shane MacDougall MalAndroid—the Crux of Android Infections Aditya K. Sood, IOActive, Michigan State PhD candidate Aditya talked about Android smartphone malware. There's a lot of old Android software out there—over 50% Gingerbread (2.3.x)—and most have unpatched vulnerabilities. Of 9 Android vulnerabilities, 8 have known exploits (such as the old Gingerbread Global Object Table exploit). Android protection includes sandboxing, security scanner, app permissions, and screened Android app market. The Android permission checker has fine-grain resource control, policy enforcement. Android static analysis also includes a static analysis app checker (bouncer), and a vulnerablity checker. What security problems does Android have? User-centric security, which depends on the user to grant permission and make smart decisions. But users don't care or think about malware (the're not aware, not paranoid). All they want is functionality, extensibility, mobility Android had no "proper" encryption before Android 3.0 No built-in protection against social engineering and web tricks Alternative Android app markets are unsafe. Simply visiting some markets can infect Android Aditya classified Android Malware types as: Type A—Apps. These interact with the Android app framework. For example, a fake Netflix app. Or Android Gold Dream (game), which uploads user files stealthy manner to a remote location. Type K—Kernel. Exploits underlying Linux libraries or kernel Type H—Hybrid. These use multiple layers (app framework, libraries, kernel). These are most commonly used by Android botnets, which are popular with Chinese botnet authors What are the threats from Android malware? These incude leak info (contacts), banking fraud, corporate network attacks, malware advertising, malware "Hackivism" (the promotion of social causes. For example, promiting specific leaders of the Tunisian or Iranian revolutions. Android malware is frequently "masquerated". That is, repackaged inside a legit app with malware. To avoid detection, the hidden malware is not unwrapped until runtime. The malware payload can be hidden in, for example, PNG files. Less common are Android bootkits—there's not many around. What they do is hijack the Android init framework—alteering system programs and daemons, then deletes itself. For example, the DKF Bootkit (China). Android App Problems: no code signing! all self-signed native code execution permission sandbox — all or none alternate market places no robust Android malware detection at network level delayed patch process Programming Weird Machines with ELF Metadata Rebecca "bx" Shapiro, Dartmouth College, NH https://github.com/bx/elf-bf-tools @bxsays on twitter Definitions. "ELF" is an executable file format used in linking and loading executables (on UNIX/Linux-class machines). "Weird machine" uses undocumented computation sources (I think of them as unintended virtual machines). Some examples of "weird machines" are those that: return to weird location, does SQL injection, corrupts the heap. Bx then talked about using ELF metadata as (an uintended) "weird machine". Some ELF background: A compiler takes source code and generates a ELF object file (hello.o). A static linker makes an ELF executable from the object file. A runtime linker and loader takes ELF executable and loads and relocates it in memory. The ELF file has symbols to relocate functions and variables. ELF has two relocation tables—one at link time and another one at loading time: .rela.dyn (link time) and .dynsym (dynamic table). GOT: Global Offset Table of addresses for dynamically-linked functions. PLT: Procedure Linkage Tables—works with GOT. The memory layout of a process (not the ELF file) is, in order: program (+ heap), dynamic libraries, libc, ld.so, stack (which includes the dynamic table loaded into memory) For ELF, the "weird machine" is found and exploited in the loader. ELF can be crafted for executing viruses, by tricking runtime into executing interpreted "code" in the ELF symbol table. One can inject parasitic "code" without modifying the actual ELF code portions. Think of the ELF symbol table as an "assembly language" interpreter. It has these elements: instructions: Add, move, jump if not 0 (jnz) Think of symbol table entries as "registers" symbol table value is "contents" immediate values are constants direct values are addresses (e.g., 0xdeadbeef) move instruction: is a relocation table entry add instruction: relocation table "addend" entry jnz instruction: takes multiple relocation table entries The ELF weird machine exploits the loader by relocating relocation table entries. The loader will go on forever until told to stop. It stores state on stack at "end" and uses IFUNC table entries (containing function pointer address). The ELF weird machine, called "Brainfu*k" (BF) has: 8 instructions: pointer inc, dec, inc indirect, dec indirect, jump forward, jump backward, print. Three registers - 3 registers Bx showed example BF source code that implemented a Turing machine printing "hello, world". More interesting was the next demo, where bx modified ping. Ping runs suid as root, but quickly drops privilege. BF modified the loader to disable the library function call dropping privilege, so it remained as root. Then BF modified the ping -t argument to execute the -t filename as root. It's best to show what this modified ping does with an example: $ whoami bx $ ping localhost -t backdoor.sh # executes backdoor $ whoami root $ The modified code increased from 285948 bytes to 290209 bytes. A BF tool compiles "executable" by modifying the symbol table in an existing ELF executable. The tool modifies .dynsym and .rela.dyn table, but not code or data. Privacy at the Handset: New FCC Rules? "Valkyrie" (Christie Dudley, Santa Clara Law JD candidate) Valkyrie talked about mobile handset privacy. Some background: Senator Franken (also a comedian) became alarmed about CarrierIQ, where the carriers track their customers. Franken asked the FCC to find out what obligations carriers think they have to protect privacy. The carriers' response was that they are doing just fine with self-regulation—no worries! Carriers need to collect data, such as missed calls, to maintain network quality. But carriers also sell data for marketing. Verizon sells customer data and enables this with a narrow privacy policy (only 1 month to opt out, with difficulties). The data sold is not individually identifiable and is aggregated. But Verizon recommends, as an aggregation workaround to "recollate" data to other databases to identify customers indirectly. The FCC has regulated telephone privacy since 1934 and mobile network privacy since 2007. Also, the carriers say mobile phone privacy is a FTC responsibility (not FCC). FTC is trying to improve mobile app privacy, but FTC has no authority over carrier / customer relationships. As a side note, Apple iPhones are unique as carriers have extra control over iPhones they don't have with other smartphones. As a result iPhones may be more regulated. Who are the consumer advocates? Everyone knows EFF, but EPIC (Electrnic Privacy Info Center), although more obsecure, is more relevant. What to do? Carriers must be accountable. Opt-in and opt-out at any time. Carriers need incentive to grant users control for those who want it, by holding them liable and responsible for breeches on their clock. Location information should be added current CPNI privacy protection, and require "Pen/trap" judicial order to obtain (and would still be a lower standard than 4th Amendment). Politics are on a pro-privacy swing now, with many senators and the Whitehouse. There will probably be new regulation soon, and enforcement will be a problem, but consumers will still have some benefit. Hacking Measured Boot and UEFI Dan Griffin, JWSecure, Inc., Seattle, @JWSdan Dan talked about hacking measured UEFI boot. First some terms: UEFI is a boot technology that is replacing BIOS (has whitelisting and blacklisting). UEFI protects devices against rootkits. TPM - hardware security device to store hashs and hardware-protected keys "secure boot" can control at firmware level what boot images can boot "measured boot" OS feature that tracks hashes (from BIOS, boot loader, krnel, early drivers). "remote attestation" allows remote validation and control based on policy on a remote attestation server. Microsoft pushing TPM (Windows 8 required), but Google is not. Intel TianoCore is the only open source for UEFI. Dan has Measured Boot Tool at http://mbt.codeplex.com/ with a demo where you can also view TPM data. TPM support already on enterprise-class machines. UEFI Weaknesses. UEFI toolkits are evolving rapidly, but UEFI has weaknesses: assume user is an ally trust TPM implicitly, and attached to computer hibernate file is unprotected (disk encryption protects against this) protection migrating from hardware to firmware delays in patching and whitelist updates will UEFI really be adopted by the mainstream (smartphone hardware support, bank support, apathetic consumer support) You Can't Buy Security: Building the Open Source InfoSec Program Boris Sverdlik, ISDPodcast.com co-host Boris talked about problems typical with current security audits. "IT Security" is an oxymoron—IT exists to enable buiness, uptime, utilization, reporting, but don't care about security—IT has conflict of interest. There's no Magic Bullet ("blinky box"), no one-size-fits-all solution (e.g., Intrusion Detection Systems (IDSs)). Regulations don't make you secure. The cloud is not secure (because of shared data and admin access). Defense and pen testing is not sexy. Auditors are not solution (security not a checklist)—what's needed is experience and adaptability—need soft skills. Step 1: First thing is to Google and learn the company end-to-end before you start. Get to know the management team (not IT team), meet as many people as you can. Don't use arbitrary values such as CISSP scores. Quantitive risk assessment is a myth (e.g. AV*EF-SLE). Learn different Business Units, legal/regulatory obligations, learn the business and where the money is made, verify company is protected from script kiddies (easy), learn sensitive information (IP, internal use only), and start with low-hanging fruit (customer service reps and social engineering). Step 2: Policies. Keep policies short and relevant. Generic SANS "security" boilerplate policies don't make sense and are not followed. Focus on acceptable use, data usage, communications, physical security. Step 3: Implementation: keep it simple stupid. Open source, although useful, is not free (implementation cost). Access controls with authentication & authorization for local and remote access. MS Windows has it, otherwise use OpenLDAP, OpenIAM, etc. Application security Everyone tries to reinvent the wheel—use existing static analysis tools. Review high-risk apps and major revisions. Don't run different risk level apps on same system. Assume host/client compromised and use app-level security control. Network security VLAN != segregated because there's too many workarounds. Use explicit firwall rules, active and passive network monitoring (snort is free), disallow end user access to production environment, have a proxy instead of direct Internet access. Also, SSL certificates are not good two-factor auth and SSL does not mean "safe." Operational Controls Have change, patch, asset, & vulnerability management (OSSI is free). For change management, always review code before pushing to production For logging, have centralized security logging for business-critical systems, separate security logging from administrative/IT logging, and lock down log (as it has everything). Monitor with OSSIM (open source). Use intrusion detection, but not just to fulfill a checkbox: build rules from a whitelist perspective (snort). OSSEC has 95% of what you need. Vulnerability management is a QA function when done right: OpenVas and Seccubus are free. Security awareness The reality is users will always click everything. Build real awareness, not compliance driven checkbox, and have it integrated into the culture. Pen test by crowd sourcing—test with logging COSSP http://www.cossp.org/ - Comprehensive Open Source Security Project What Journalists Want: The Investigative Reporters' Perspective on Hacking Dave Maas, San Diego CityBeat Jason Leopold, Truthout.org The difference between hackers and investigative journalists: For hackers, the motivation varies, but method is same, technological specialties. For investigative journalists, it's about one thing—The Story, and they need broad info-gathering skills. J-School in 60 Seconds: Generic formula: Person or issue of pubic interest, new info, or angle. Generic criteria: proximity, prominence, timeliness, human interest, oddity, or consequence. Media awareness of hackers and trends: journalists becoming extremely aware of hackers with congressional debates (privacy, data breaches), demand for data-mining Journalists, use of coding and web development for Journalists, and Journalists busted for hacking (Murdock). Info gathering by investigative journalists include Public records laws. Federal Freedom of Information Act (FOIA) is good, but slow. California Public Records Act is a lot stronger. FOIA takes forever because of foot-dragging—it helps to be specific. Often need to sue (especially FBI). CPRA is faster, and requests can be vague. Dumps and leaks (a la Wikileaks) Journalists want: leads, protecting ourselves, our sources, and adapting tools for news gathering (Google hacking). Anonomity is important to whistleblowers. They want no digital footprint left behind (e.g., email, web log). They don't trust encryption, want to feel safe and secure. Whistleblower laws are very weak—there's no upside for whistleblowers—they have to be very passionate to do it. Accessibility and Security or: How I Learned to Stop Worrying and Love the Halting Problem Anna Shubina, Dartmouth College Anna talked about how accessibility and security are related. Accessibility of digital content (not real world accessibility). mostly refers to blind users and screenreaders, for our purpose. Accessibility is about parsing documents, as are many security issues. "Rich" executable content causes accessibility to fail, and often causes security to fail. For example MS Word has executable format—it's not a document exchange format—more dangerous than PDF or HTML. Accessibility is often the first and maybe only sanity check with parsing. They have no choice because someone may want to read what you write. Google, for example, is very particular about web browser you use and are bad at supporting other browsers. Uses JavaScript instead of links, often requiring mouseover to display content. PDF is a security nightmare. Executible format, embedded flash, JavaScript, etc. 15 million lines of code. Google Chrome doesn't handle PDF correctly, causing several security bugs. PDF has an accessibility checker and PDF tagging, to help with accessibility. But no PDF checker checks for incorrect tags, untagged content, or validates lists or tables. None check executable content at all. The "Halting Problem" is: can one decide whether a program will ever stop? The answer, in general, is no (Rice's theorem). The same holds true for accessibility checkers. Language-theoretic Security says complicated data formats are hard to parse and cannot be solved due to the Halting Problem. W3C Web Accessibility Guidelines: "Perceivable, Operable, Understandable, Robust" Not much help though, except for "Robust", but here's some gems: * all information should be parsable (paraphrasing) * if not parsable, cannot be converted to alternate formats * maximize compatibility in new document formats Executible webpages are bad for security and accessibility. They say it's for a better web experience. But is it necessary to stuff web pages with JavaScript for a better experience? A good example is The Drudge Report—it has hand-written HTML with no JavaScript, yet drives a lot of web traffic due to good content. A bad example is Google News—hidden scrollbars, guessing user input. Solutions: Accessibility and security problems come from same source Expose "better user experience" myth Keep your corner of Internet parsable Remember "Halting Problem"—recognize false solutions (checking and verifying tools) Stop Patching, for Stronger PCI Compliance Adam Brand, protiviti @adamrbrand, http://www.picfun.com/ Adam talked about PCI compliance for retail sales. Take an example: for PCI compliance, 50% of Brian's time (a IT guy), 960 hours/year was spent patching POSs in 850 restaurants. Often applying some patches make no sense (like fixing a browser vulnerability on a server). "Scanner worship" is overuse of vulnerability scanners—it gives a warm and fuzzy and it's simple (red or green results—fix reds). Scanners give a false sense of security. In reality, breeches from missing patches are uncommon—more common problems are: default passwords, cleartext authentication, misconfiguration (firewall ports open). Patching Myths: Myth 1: install within 30 days of patch release (but PCI §6.1 allows a "risk-based approach" instead). Myth 2: vendor decides what's critical (also PCI §6.1). But §6.2 requires user ranking of vulnerabilities instead. Myth 3: scan and rescan until it passes. But PCI §11.2.1b says this applies only to high-risk vulnerabilities. Adam says good recommendations come from NIST 800-40. Instead use sane patching and focus on what's really important. From NIST 800-40: Proactive: Use a proactive vulnerability management process: use change control, configuration management, monitor file integrity. Monitor: start with NVD and other vulnerability alerts, not scanner results. Evaluate: public-facing system? workstation? internal server? (risk rank) Decide:on action and timeline Test: pre-test patches (stability, functionality, rollback) for change control Install: notify, change control, tickets McAfee Secure & Trustmarks — a Hacker's Best Friend Jay James, Shane MacDougall, Tactical Intelligence Inc., Canada "McAfee Secure Trustmark" is a website seal marketed by McAfee. A website gets this badge if they pass their remote scanning. The problem is a removal of trustmarks act as flags that you're vulnerable. Easy to view status change by viewing McAfee list on website or on Google. "Secure TrustGuard" is similar to McAfee. Jay and Shane wrote Perl scripts to gather sites from McAfee and search engines. If their certification image changes to a 1x1 pixel image, then they are longer certified. Their scripts take deltas of scans to see what changed daily. The bottom line is change in TrustGuard status is a flag for hackers to attack your site. Entire idea of seals is silly—you're raising a flag saying if you're vulnerable.

    Read the article

  • Developing web apps using ASP.NET MVC 3, Razor and EF Code First - Part 1

    - by shiju
    In this post, I will demonstrate web application development using ASP. NET MVC 3, Razor and EF code First. This post will also cover Dependency Injection using Unity 2.0 and generic Repository and Unit of Work for EF Code First. The following frameworks will be used for this step by step tutorial. ASP.NET MVC 3 EF Code First CTP 5 Unity 2.0 Define Domain Model Let’s create domain model for our simple web application Category class public class Category {     public int CategoryId { get; set; }     [Required(ErrorMessage = "Name Required")]     [StringLength(25, ErrorMessage = "Must be less than 25 characters")]     public string Name { get; set;}     public string Description { get; set; }     public virtual ICollection<Expense> Expenses { get; set; } }   Expense class public class Expense {             public int ExpenseId { get; set; }            public string  Transaction { get; set; }     public DateTime Date { get; set; }     public double Amount { get; set; }     public int CategoryId { get; set; }     public virtual Category Category { get; set; } } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. In this post, we will be focusing on CRUD operations for the entity Category and will be working on the Expense entity with a View Model object in the later post. And the source code for this application will be refactored over time. The above entities are very simple POCO (Plain Old CLR Object) classes and the entity Category is decorated with validation attributes in the System.ComponentModel.DataAnnotations namespace. Now we want to use these entities for defining model objects for the Entity Framework 4. Using the Code First approach of Entity Framework, we can first define the entities by simply writing POCO classes without any coupling with any API or database library. This approach lets you focus on domain model which will enable Domain-Driven Development for applications. EF code first support is currently enabled with a separate API that is runs on top of the Entity Framework 4. EF Code First is reached CTP 5 when I am writing this article. Creating Context Class for Entity Framework We have created our domain model and let’s create a class in order to working with Entity Framework Code First. For this, you have to download EF Code First CTP 5 and add reference to the assembly EntitFramework.dll. You can also use NuGet to download add reference to EEF Code First.    public class MyFinanceContext : DbContext {     public MyFinanceContext() : base("MyFinance") { }     public DbSet<Category> Categories { get; set; }     public DbSet<Expense> Expenses { get; set; }         }   The above class MyFinanceContext is derived from DbContext that can connect your model classes to a database. The MyFinanceContext class is mapping our Category and Expense class into database tables Categories and Expenses using DbSet<TEntity> where TEntity is any POCO class. When we are running the application at first time, it will automatically create the database. EF code-first look for a connection string in web.config or app.config that has the same name as the dbcontext class. If it is not find any connection string with the convention, it will automatically create database in local SQL Express database by default and the name of the database will be same name as the dbcontext class. You can also define the name of database in constructor of the the dbcontext class. Unlike NHibernate, we don’t have to use any XML based mapping files or Fluent interface for mapping between our model and database. The model classes of Code First are working on the basis of conventions and we can also use a fluent API to refine our model. The convention for primary key is ‘Id’ or ‘<class name>Id’.  If primary key properties are detected with type ‘int’, ‘long’ or ‘short’, they will automatically registered as identity columns in the database by default. Primary key detection is not case sensitive. We can define our model classes with validation attributes in the System.ComponentModel.DataAnnotations namespace and it automatically enforces validation rules when a model object is updated or saved. Generic Repository for EF Code First We have created model classes and dbcontext class. Now we have to create generic repository pattern for data persistence with EF code first. If you don’t know about the repository pattern, checkout Martin Fowler’s article on Repository Let’s create a generic repository to working with DbContext and DbSet generics. public interface IRepository<T> where T : class     {         void Add(T entity);         void Delete(T entity);         T GetById(long Id);         IEnumerable<T> All();     }   RepositoryBasse – Generic Repository class public abstract class RepositoryBase<T> where T : class { private MyFinanceContext database; private readonly IDbSet<T> dbset; protected RepositoryBase(IDatabaseFactory databaseFactory) {     DatabaseFactory = databaseFactory;     dbset = Database.Set<T>(); }   protected IDatabaseFactory DatabaseFactory {     get; private set; }   protected MyFinanceContext Database {     get { return database ?? (database = DatabaseFactory.Get()); } } public virtual void Add(T entity) {     dbset.Add(entity);            }        public virtual void Delete(T entity) {     dbset.Remove(entity); }   public virtual T GetById(long id) {     return dbset.Find(id); }   public virtual IEnumerable<T> All() {     return dbset.ToList(); } }   DatabaseFactory class public class DatabaseFactory : Disposable, IDatabaseFactory {     private MyFinanceContext database;     public MyFinanceContext Get()     {         return database ?? (database = new MyFinanceContext());     }     protected override void DisposeCore()     {         if (database != null)             database.Dispose();     } } Unit of Work If you are new to Unit of Work pattern, checkout Fowler’s article on Unit of Work . According to Martin Fowler, the Unit of Work pattern "maintains a list of objects affected by a business transaction and coordinates the writing out of changes and the resolution of concurrency problems." Let’s create a class for handling Unit of Work   public interface IUnitOfWork {     void Commit(); }   UniOfWork class public class UnitOfWork : IUnitOfWork {     private readonly IDatabaseFactory databaseFactory;     private MyFinanceContext dataContext;       public UnitOfWork(IDatabaseFactory databaseFactory)     {         this.databaseFactory = databaseFactory;     }       protected MyFinanceContext DataContext     {         get { return dataContext ?? (dataContext = databaseFactory.Get()); }     }       public void Commit()     {         DataContext.Commit();     } }   The Commit method of the UnitOfWork will call the commit method of MyFinanceContext class and it will execute the SaveChanges method of DbContext class.   Repository class for Category In this post, we will be focusing on the persistence against Category entity and will working on other entities in later post. Let’s create a repository for handling CRUD operations for Category using derive from a generic Repository RepositoryBase<T>.   public class CategoryRepository: RepositoryBase<Category>, ICategoryRepository     {     public CategoryRepository(IDatabaseFactory databaseFactory)         : base(databaseFactory)         {         }                } public interface ICategoryRepository : IRepository<Category> { } If we need additional methods than generic repository for the Category, we can define in the CategoryRepository. Dependency Injection using Unity 2.0 If you are new to Inversion of Control/ Dependency Injection or Unity, please have a look on my articles at http://weblogs.asp.net/shijuvarghese/archive/tags/IoC/default.aspx. I want to create a custom lifetime manager for Unity to store container in the current HttpContext.   public class HttpContextLifetimeManager<T> : LifetimeManager, IDisposable {     public override object GetValue()     {         return HttpContext.Current.Items[typeof(T).AssemblyQualifiedName];     }     public override void RemoveValue()     {         HttpContext.Current.Items.Remove(typeof(T).AssemblyQualifiedName);     }     public override void SetValue(object newValue)     {         HttpContext.Current.Items[typeof(T).AssemblyQualifiedName] = newValue;     }     public void Dispose()     {         RemoveValue();     } }   Let’s create controller factory for Unity in the ASP.NET MVC 3 application. public class UnityControllerFactory : DefaultControllerFactory { IUnityContainer container; public UnityControllerFactory(IUnityContainer container) {     this.container = container; } protected override IController GetControllerInstance(RequestContext reqContext, Type controllerType) {     IController controller;     if (controllerType == null)         throw new HttpException(                 404, String.Format(                     "The controller for path '{0}' could not be found" +     "or it does not implement IController.",                 reqContext.HttpContext.Request.Path));       if (!typeof(IController).IsAssignableFrom(controllerType))         throw new ArgumentException(                 string.Format(                     "Type requested is not a controller: {0}",                     controllerType.Name),                     "controllerType");     try     {         controller= container.Resolve(controllerType) as IController;     }     catch (Exception ex)     {         throw new InvalidOperationException(String.Format(                                 "Error resolving controller {0}",                                 controllerType.Name), ex);     }     return controller; }   }   Configure contract and concrete types in Unity Let’s configure our contract and concrete types in Unity for resolving our dependencies.   private void ConfigureUnity() {     //Create UnityContainer               IUnityContainer container = new UnityContainer()                 .RegisterType<IDatabaseFactory, DatabaseFactory>(new HttpContextLifetimeManager<IDatabaseFactory>())     .RegisterType<IUnitOfWork, UnitOfWork>(new HttpContextLifetimeManager<IUnitOfWork>())     .RegisterType<ICategoryRepository, CategoryRepository>(new HttpContextLifetimeManager<ICategoryRepository>());                 //Set container for Controller Factory                ControllerBuilder.Current.SetControllerFactory(             new UnityControllerFactory(container)); }   In the above ConfigureUnity method, we are registering our types onto Unity container with custom lifetime manager HttpContextLifetimeManager. Let’s call ConfigureUnity method in the Global.asax.cs for set controller factory for Unity and configuring the types with Unity.   protected void Application_Start() {     AreaRegistration.RegisterAllAreas();     RegisterGlobalFilters(GlobalFilters.Filters);     RegisterRoutes(RouteTable.Routes);     ConfigureUnity(); }   Developing web application using ASP.NET MVC 3 We have created our domain model for our web application and also have created repositories and configured dependencies with Unity container. Now we have to create controller classes and views for doing CRUD operations against the Category entity. Let’s create controller class for Category Category Controller   public class CategoryController : Controller {     private readonly ICategoryRepository categoryRepository;     private readonly IUnitOfWork unitOfWork;           public CategoryController(ICategoryRepository categoryRepository, IUnitOfWork unitOfWork)     {         this.categoryRepository = categoryRepository;         this.unitOfWork = unitOfWork;     }       public ActionResult Index()     {         var categories = categoryRepository.All();         return View(categories);     }     [HttpGet]     public ActionResult Edit(int id)     {         var category = categoryRepository.GetById(id);         return View(category);     }       [HttpPost]     public ActionResult Edit(int id, FormCollection collection)     {         var category = categoryRepository.GetById(id);         if (TryUpdateModel(category))         {             unitOfWork.Commit();             return RedirectToAction("Index");         }         else return View(category);                 }       [HttpGet]     public ActionResult Create()     {         var category = new Category();         return View(category);     }           [HttpPost]     public ActionResult Create(Category category)     {         if (!ModelState.IsValid)         {             return View("Create", category);         }                     categoryRepository.Add(category);         unitOfWork.Commit();         return RedirectToAction("Index");     }       [HttpPost]     public ActionResult Delete(int  id)     {         var category = categoryRepository.GetById(id);         categoryRepository.Delete(category);         unitOfWork.Commit();         var categories = categoryRepository.All();         return PartialView("CategoryList", categories);       }        }   Creating Views in Razor Now we are going to create views in Razor for our ASP.NET MVC 3 application.  Let’s create a partial view CategoryList.cshtml for listing category information and providing link for Edit and Delete operations. CategoryList.cshtml @using MyFinance.Helpers; @using MyFinance.Domain; @model IEnumerable<Category>      <table>         <tr>         <th>Actions</th>         <th>Name</th>          <th>Description</th>         </tr>     @foreach (var item in Model) {             <tr>             <td>                 @Html.ActionLink("Edit", "Edit",new { id = item.CategoryId })                 @Ajax.ActionLink("Delete", "Delete", new { id = item.CategoryId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divCategoryList" })                           </td>             <td>                 @item.Name             </td>             <td>                 @item.Description             </td>         </tr>          }       </table>     <p>         @Html.ActionLink("Create New", "Create")     </p> The delete link is providing Ajax functionality using the Ajax.ActionLink. This will call an Ajax request for Delete action method in the CategoryCotroller class. In the Delete action method, it will return Partial View CategoryList after deleting the record. We are using CategoryList view for the Ajax functionality and also for Index view using for displaying list of category information. Let’s create Index view using partial view CategoryList  Index.chtml @model IEnumerable<MyFinance.Domain.Category> @{     ViewBag.Title = "Index"; }    <h2>Category List</h2>    <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script>    <div id="divCategoryList">               @Html.Partial("CategoryList", Model) </div>   We can call the partial views using Html.Partial helper method. Now we are going to create View pages for insert and update functionality for the Category. Both view pages are sharing common user interface for entering the category information. So I want to create an EditorTemplate for the Category information. We have to create the EditorTemplate with the same name of entity object so that we can refer it on view pages using @Html.EditorFor(model => model) . So let’s create template with name Category. Let’s create view page for insert Category information   @model MyFinance.Domain.Category   @{     ViewBag.Title = "Save"; }   <h2>Create</h2>   <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script>   @using (Html.BeginForm()) {     @Html.ValidationSummary(true)     <fieldset>         <legend>Category</legend>                @Html.EditorFor(model => model)               <p>             <input type="submit" value="Create" />         </p>     </fieldset> }   <div>     @Html.ActionLink("Back to List", "Index") </div> ViewStart file In Razor views, we can add a file named _viewstart.cshtml in the views directory  and this will be shared among the all views with in the Views directory. The below code in the _viewstart.cshtml, sets the Layout page for every Views in the Views folder.      @{     Layout = "~/Views/Shared/_Layout.cshtml"; }   Source Code You can download the source code from http://efmvc.codeplex.com/ . The source will be refactored on over time.   Summary In this post, we have created a simple web application using ASP.NET MVC 3 and EF Code First. We have discussed on technologies and practices such as ASP.NET MVC 3, Razor, EF Code First, Unity 2, generic Repository and Unit of Work. In my later posts, I will modify the application and will be discussed on more things. Stay tuned to my blog  for more posts on step by step application building.

    Read the article

  • NoSQL with RavenDB and ASP.NET MVC - Part 2

    - by shiju
    In my previous post, we have discussed on how to work with RavenDB document database in an ASP.NET MVC application. We have setup RavenDB for our ASP.NET MVC application and did basic CRUD operations against a simple domain entity. In this post, let’s discuss on domain entity with deep object graph and how to query against RavenDB documents using Indexes.Let's create two domain entities for our demo ASP.NET MVC appplication  public class Category {       public string Id { get; set; }     [Required(ErrorMessage = "Name Required")]     [StringLength(25, ErrorMessage = "Must be less than 25 characters")]     public string Name { get; set;}     public string Description { get; set; }     public List<Expense> Expenses { get; set; }       public Category()     {         Expenses = new List<Expense>();     } }    public class Expense {       public string Id { get; set; }     public Category Category { get; set; }     public string  Transaction { get; set; }     public DateTime Date { get; set; }     public double Amount { get; set; }   }  We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category.Let's create  ASP.NET MVC view model  for Expense transaction public class ExpenseViewModel {     public string Id { get; set; }       public string CategoryId { get; set; }       [Required(ErrorMessage = "Transaction Required")]            public string Transaction { get; set; }       [Required(ErrorMessage = "Date Required")]            public DateTime Date { get; set; }       [Required(ErrorMessage = "Amount Required")]     public double Amount { get; set; }       public IEnumerable<SelectListItem> Category { get; set; } } Let's create a contract type for Expense Repository  public interface IExpenseRepository {     Expense Load(string id);     IEnumerable<Expense> GetExpenseTransactions(DateTime startDate,DateTime endDate);     void Save(Expense expense,string categoryId);     void Delete(string id);  } Let's create a concrete type for Expense Repository for handling CRUD operations. public class ExpenseRepository : IExpenseRepository {   private IDocumentSession session; public ExpenseRepository() {         session = MvcApplication.CurrentSession; } public Expense Load(string id) {     return session.Load<Expense>(id); } public IEnumerable<Expense> GetExpenseTransactions(DateTime startDate, DateTime endDate) {             //Querying using the Index name "ExpenseTransactions"     //filtering with dates     var expenses = session.LuceneQuery<Expense>("ExpenseTransactions")         .WaitForNonStaleResults()         .Where(exp => exp.Date >= startDate && exp.Date <= endDate)         .ToArray();     return expenses; } public void Save(Expense expense,string categoryId) {     var category = session.Load<Category>(categoryId);     if (string.IsNullOrEmpty(expense.Id))     {         //new expense transaction         expense.Category = category;         session.Store(expense);     }     else     {         //modifying an existing expense transaction         var expenseToEdit = Load(expense.Id);         //Copy values to  expenseToEdit         ModelCopier.CopyModel(expense, expenseToEdit);         //set category object         expenseToEdit.Category = category;       }     //save changes     session.SaveChanges(); } public void Delete(string id) {     var expense = Load(id);     session.Delete<Expense>(expense);     session.SaveChanges(); }   }  Insert/Update Expense Transaction The Save method is used for both insert a new expense record and modifying an existing expense transaction. For a new expense transaction, we store the expense object with associated category into document session object and load the existing expense object and assign values to it for editing a existing record.  public void Save(Expense expense,string categoryId) {     var category = session.Load<Category>(categoryId);     if (string.IsNullOrEmpty(expense.Id))     {         //new expense transaction         expense.Category = category;         session.Store(expense);     }     else     {         //modifying an existing expense transaction         var expenseToEdit = Load(expense.Id);         //Copy values to  expenseToEdit         ModelCopier.CopyModel(expense, expenseToEdit);         //set category object         expenseToEdit.Category = category;       }     //save changes     session.SaveChanges(); } Querying Expense transactions   public IEnumerable<Expense> GetExpenseTransactions(DateTime startDate, DateTime endDate) {             //Querying using the Index name "ExpenseTransactions"     //filtering with dates     var expenses = session.LuceneQuery<Expense>("ExpenseTransactions")         .WaitForNonStaleResults()         .Where(exp => exp.Date >= startDate && exp.Date <= endDate)         .ToArray();     return expenses; }  The GetExpenseTransactions method returns expense transactions using a LINQ query expression with a Date comparison filter. The Lucene Query is using a index named "ExpenseTransactions" for getting the result set. In RavenDB, Indexes are LINQ queries stored in the RavenDB server and would be  executed on the background and will perform query against the JSON documents. Indexes will be working with a lucene query expression or a set operation. Indexes are composed using a Map and Reduce function. Check out Ayende's blog post on Map/Reduce We can create index using RavenDB web admin tool as well as programmitically using its Client API. The below shows the screen shot of creating index using web admin tool. We can also create Indexes using Raven Cleint API as shown in the following code documentStore.DatabaseCommands.PutIndex("ExpenseTransactions",     new IndexDefinition<Expense,Expense>() {     Map = Expenses => from exp in Expenses                     select new { exp.Date } });  In the Map function, we used a Linq expression as shown in the following from exp in docs.Expensesselect new { exp.Date };We have not used a Reduce function for the above index. A Reduce function is useful while performing aggregate functions based on the results from the Map function. Indexes can be use with set operations of RavenDB.SET OperationsUnlike other document databases, RavenDB supports set based operations that lets you to perform updates, deletes and inserts to the bulk_docs endpoint of RavenDB. For doing this, you just pass a query to a Index as shown in the following commandDELETE http://localhost:8080/bulk_docs/ExpenseTransactions?query=Date:20100531The above command using the Index named "ExpenseTransactions" for querying the documents with Date filter and  will delete all the documents that match the query criteria. The above command is equivalent of the following queryDELETE FROM ExpensesWHERE Date='2010-05-31' Controller & ActionsWe have created Expense Repository class for performing CRUD operations for the Expense transactions. Let's create a controller class for handling expense transactions.   public class ExpenseController : Controller { private ICategoryRepository categoyRepository; private IExpenseRepository expenseRepository; public ExpenseController(ICategoryRepository categoyRepository, IExpenseRepository expenseRepository) {     this.categoyRepository = categoyRepository;     this.expenseRepository = expenseRepository; } //Get Expense transactions based on dates public ActionResult Index(DateTime? StartDate, DateTime? EndDate) {     //If date is not passed, take current month's first and last dte     DateTime dtNow;     dtNow = DateTime.Today;     if (!StartDate.HasValue)     {         StartDate = new DateTime(dtNow.Year, dtNow.Month, 1);         EndDate = StartDate.Value.AddMonths(1).AddDays(-1);     }     //take last date of startdate's month, if endate is not passed     if (StartDate.HasValue && !EndDate.HasValue)     {         EndDate = (new DateTime(StartDate.Value.Year, StartDate.Value.Month, 1)).AddMonths(1).AddDays(-1);     }       var expenses = expenseRepository.GetExpenseTransactions(StartDate.Value, EndDate.Value);     if (Request.IsAjaxRequest())     {           return PartialView("ExpenseList", expenses);     }     ViewData.Add("StartDate", StartDate.Value.ToShortDateString());     ViewData.Add("EndDate", EndDate.Value.ToShortDateString());             return View(expenses);            }   // GET: /Expense/Edit public ActionResult Edit(string id) {       var expenseModel = new ExpenseViewModel();     var expense = expenseRepository.Load(id);     ModelCopier.CopyModel(expense, expenseModel);     var categories = categoyRepository.GetCategories();     expenseModel.Category = categories.ToSelectListItems(expense.Category.Id.ToString());                    return View("Save", expenseModel);          }   // // GET: /Expense/Create   public ActionResult Create() {     var expenseModel = new ExpenseViewModel();               var categories = categoyRepository.GetCategories();     expenseModel.Category = categories.ToSelectListItems("-1");     expenseModel.Date = DateTime.Today;     return View("Save", expenseModel); }   // // POST: /Expense/Save // Insert/Update Expense Tansaction [HttpPost] public ActionResult Save(ExpenseViewModel expenseViewModel) {     try     {         if (!ModelState.IsValid)         {               var categories = categoyRepository.GetCategories();                 expenseViewModel.Category = categories.ToSelectListItems(expenseViewModel.CategoryId);                               return View("Save", expenseViewModel);         }           var expense=new Expense();         ModelCopier.CopyModel(expenseViewModel, expense);          expenseRepository.Save(expense, expenseViewModel.CategoryId);                       return RedirectToAction("Index");     }     catch     {         return View();     } } //Delete a Expense Transaction public ActionResult Delete(string id) {     expenseRepository.Delete(id);     return RedirectToAction("Index");     }     }     Download the Source - You can download the source code from http://ravenmvc.codeplex.com

    Read the article

  • Why is my WCF Rest Service on IIS7 Authenticating TWICE!?!?

    - by TheAggie
    Ok, if someone could shed some light on this for me, I would greatly appreciate it. So here we go. I had a rest service running fine the other day but after I accidentally overwrote the web.config all hell broke loose. I've spent the past day and a half trying to sort things out but I can't seem to figure out what is missing or misplaced. So, I've designed this service around WCF Rest Contrib (http://wcfrestcontrib.codeplex.com)'s authentication process. Now, I can get this working fine on my localhost w/ the current web.config (minus the endpoint entry) but once I upload it to discountasp and select "basic authorization" in the ISS7 Manager, it appears that I'm getting authenticated twice! Once using my discount asp.net user/pass and then the next time using the application user/pass. Unfortunately I only provide one set of credentials and don't want to hard code my discountasp account info into the app. Like I said before, this worked fine a few days ago. Anyway. here is my web.config as it is now: <?xml version="1.0"?> <configuration> <connectionStrings> <add name="SQL2008_ConnectionString" connectionString="Data Source=sql2k8xx.discountasp.net;Initial Catalog=SQL2008_xx;Persist Security Info=True;User ID=SQL2008_xx_user;Password=myPass" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <httpRuntime maxRequestLength="204800" executionTimeout="3600"/> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </assemblies> </compilation> <httpModules> <add name="ServiceAnonymityModule" type="WcfRestContrib.Web.ServiceAnonymityModule, WcfRestContrib"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ServiceAnonymityModule"/> <add name="ServiceAnonymityModule" type="WcfRestContrib.Web.ServiceAnonymityModule, WcfRestContrib"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> </handlers> </system.webServer> <system.diagnostics> <trace autoflush="true" /> </system.diagnostics> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="false"> <baseAddressPrefixFilters> <add prefix="http://www.mydomain.com/myServiceBaseAddress"/> </baseAddressPrefixFilters> </serviceHostingEnvironment> <extensions> <behaviorExtensions> <add name="webAuthentication" type="WcfRestContrib.ServiceModel.Configuration.WebAuthentication.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="errorHandler" type="WcfRestContrib.ServiceModel.Configuration.ErrorHandler.BehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="webFormatter" type="WcfRestContrib.ServiceModel.Configuration.WebDispatchFormatter.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="webErrorHandler" type="WcfRestContrib.ServiceModel.Configuration.WebErrorHandler.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> </behaviorExtensions> </extensions> <bindings> <customBinding> <binding name="HttpStreamedRest"> <httpTransport maxReceivedMessageSize="209715200" manualAddressing="true" /> </binding> <binding name="HttpsStreamedRest"> <httpsTransport maxReceivedMessageSize="209715200" manualAddressing="true" /> </binding> </customBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="Rest"> <webAuthentication requireSecureTransport="false" authenticationHandlerType="WcfRestContrib.ServiceModel.Dispatcher.WebBasicAuthenticationHandler, WcfRestContrib" usernamePasswordValidatorType="MyLibrary.Runtime.SecurityValidator, MyLibrary" source="MyRESTServiceRealm"/> <webFormatter> <formatters defaultMimeType="application/xml"> <formatter mimeTypes="application/xml,text/xml" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.PoxDataContract, WcfRestContrib"/> <formatter mimeTypes="application/json" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.DataContractJson, WcfRestContrib"/> <formatter mimeTypes="application/x-www-form-urlencoded" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.FormUrlEncoded, WcfRestContrib"/> </formatters> </webFormatter> <errorHandler errorHandlerType="WcfRestContrib.ServiceModel.Web.WebErrorHandler, WcfRestContrib"/> <webErrorHandler returnRawException="true" logHandlerType="MyLibrary.Runtime.LogHandler, MyLibrary" unhandledErrorMessage="An error has occured processing your request. Please contact technical support for further assistance."/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> So, whenever I upload this and change the ISS setting to Basic Authentication, it looks like it is trying to use the default handler for authentication as if I try to enter my web app user/pass, I get an error screen which has the following detailed information about the moduel/handler Detailed Error Information Module: IIS Web Core Notification: AuthenticateRequest Handler: svc-ISAPI-2.0 Error Code: 0x80070005 Requested URL: http://www.mydomain.com:80/MyService.../MyService.svc Physical Path: E:\web\xxxxxx\htdocs\MyServiceBaseAddress\MyService.svc Logon Method: Not yet determined Logon User: Not yet determined Now for the fun stuff... i tried providing my discountasp.net account username/password for kicks and sure enough it responded properly for any [OperationContract] which doesn't have [OperationAuthentication] defined (which is only one or two of the operations I have). I thought this was strange, so I looked at fiddler and saw something interesting. Whenever I try request a procedure with [OperationAuthentication] defined and provide my discountasp.net username/pass I get two different "WWW-Authenticate" headers back in Fiddler: WWW-Authenticate: Basic realm="MyRESTServiceRealm" WWW-Authenticate: Basic realm="www.mydomain.com" On the other hand, if I try to access the same procedures with only my application's user/pass, I only get the site's header: WWW-Authenticate: Basic realm="www.mydomain.com" My hypothesis is that for some reason I'm having to pass through the default "Basic Authorization" layer set by IIS before I can get to the application's "Custom Basic Authorization" layer. After verifying this by created an identical user/pass for my service that I use for my discountasp.net account, I was able to successfully pass both layers of authentication without any issues... so I think I can conclude that this is indeed the issue. Now how do I disable the default one? Do I need to do this in the IIS Manager, or in the web.config? Anyway, I have absolutely no idea how this is possible or what I need to do to resolve the issue, but I know that something is seriously out of whack. Any suggestions would be greatly appreciated! Thanks.

    Read the article

  • xVal 1.0 not generating the correct xVal.AttachValidator script in view

    - by bastijn
    I'm currently implementing xVal client-side validation. The server-side validation is working correctly at the moment. I have referenced xVall.dll (from xVal1.0.zip) in my project as well as the System.ComponentModel.DataAnnotations and System.web.mvc.DataAnnotations from the Data Annotations Model Binder Sample found at http://aspnet.codeplex.com/releases/view/24471. I have modified the method BindProperty in the DataAnnotationsModelBinder class since it returned a nullpointer exception telling me the modelState object was null. Some blogposts described to modify the method and I did according to this SO post. Next I put the following lines in my global.asax: protected void Application_Start() { // kept same and added following line RegisterModelBinders(ModelBinders.Binders); // Add this line } public void RegisterModelBinders(ModelBinderDictionary binders) // Add this whole method { binders.DefaultBinder = new Microsoft.Web.Mvc.DataAnnotations.DataAnnotationsModelBinder(); } Now, I have made a partial class and a metadata class since I use the entity framework and you cannot create partial declarations as of yet so I have: [MetadataType(typeof(PersonMetaData))] public partial class Persons { // .... } public class PersonMetaData { private const string EmailRegEx = @"^(([^<>()[\]\\.,;:\s@\""]+" + @"(\.[^<>()[\]\\.,;:\s@\""]+)*)|(\"".+\""))@" + @"((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}" + @"\.[0-9]{1,3}\])|(([a-zA-Z\-0-9]+\.)+" + @"[a-zA-Z]{2,}))$"; [Required] public string FirstName { get; set; } [Required] public string LastName { get; set; } [Required(ErrorMessage="Please fill in your email")] [RegularExpression(EmailRegEx,ErrorMessage="Please supply a valid email address")] public string Email { get; set; } } And in my controller I have the POST edit method which currently still use a FormCollection instead of a Persons object as input. I have to change this later on but due to time constraints and some strange bug this isnt done as of yet :). It shouldnt matter though. Below it is my view. // // POST: /Jobs/Edit/5 //[CustomAuthorize(Roles = "admin,moderator")] [AcceptVerbs(HttpVerbs.Post)] public ActionResult Edit([Bind(Exclude = "Id")]FormCollection form) { Persons person = this.GetLoggedInPerson(); person.UpdatedAt = DateTime.Now; // Update the updated time. TryUpdateModel(person, null, null, new string[]{"Id"}); if (ModelState.IsValid) { repository.SaveChanges(); return RedirectToAction("Index", "ControlPanel"); } return View(person); } #endregion My view contains a partial page containing the form. In my edit.aspx I have the following code: <div class="content"> <% Html.RenderPartial("PersonForm", Model); %> </div> </div> and in the .ascx partial page: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<WerkStageNu.Persons>" %> <% if (!Model.AddressesReference.IsLoaded) { %> <% Model.AddressesReference.Load(); %> <% } %> <%= Html.ValidationSummary("Edit was unsuccessful. Please correct the errors and try again.") %> <% using (Html.BeginForm()) {%> <fieldset> <legend>General information</legend> <table> <tr> <td><label for="FirstName">FirstName:</label></td><td><%= Html.TextBox("FirstName", Model.FirstName)%><%= Html.ValidationMessage("FirstName", "*")%></td> </tr> <tr> <td><label for="LastName">LastName:</label></td><td><%= Html.TextBox("LastName", Model.LastName)%><%= Html.ValidationMessage("LastName", "*")%></td> </tr> <tr> <td><label for="Email">Email:</label></td><td><%= Html.TextBox("Email", Model.Email)%><%= Html.ValidationMessage("Email", "*")%></td> </tr> <tr> <td><label for="Telephone">Telephone:</label></td><td> <%= Html.TextBox("Telephone", Model.Telephone) %><%= Html.ValidationMessage("Telephone", "*") %></td> </tr> <tr> <td><label for="Fax">Fax:</label></td><td><%= Html.TextBox("Fax", Model.Fax) %><%= Html.ValidationMessage("Fax", "*") %></td> </tr> </table> <%--<p> <label for="GenderID"><%= Html.Encode(Resources.Forms.gender) %>:</label> <%= Html.DropDownList("GenderID", Model.Genders)%> </p> --%> </fieldset> <fieldset> <legend><%= Html.Encode(Resources.Forms.addressinformation) %></legend> <table> <tr> <td><label for="Addresses.City"><%= Html.Encode(Resources.Forms.city) %>:</label></td><td><%= Html.TextBox("Addresses.City", Model.Addresses.City)%></td> </tr> <tr> <td><label for="Addresses.Street"><%= Html.Encode(Resources.Forms.street) %>:</label></td><td><%= Html.TextBox("Addresses.Street", Model.Addresses.Street)%></td> </tr> <tr> <td><label for="Addresses.StreetNo"><%= Html.Encode(Resources.Forms.streetNumber) %>:</label></td><td><%= Html.TextBox("Addresses.StreetNo", Model.Addresses.StreetNo)%></td> </tr> <tr> <td><label for="Addresses.Country"><%= Html.Encode(Resources.Forms.county) %>:</label></td><td><%= Html.TextBox("Addresses.Country", Model.Addresses.Country)%></td> </tr> </table> </fieldset> <p> <input type="image" src="../../Content/images/save_btn.png" /> </p> <%= Html.ClientSideValidation(typeof(WerkStageNu.Persons)) %> <% } % Still nothing really stunning over here. In combination with the edited data annotation dlls this gives me server-side validation working (although i have to manually exclude the "id" property as done in the TryUpdateModel). The strange thing is that it still generates the following script in my View: xVal.AttachValidator(null, {"Fields":[{"FieldName":"ID","FieldRules": [{"RuleName":"DataType","RuleParameters":{"Type":"Integer"}}]}]}, {}) While all the found blogposts on this ( 1, 2 ) but all of those are old posts and all say it should be fixed from xVal 0.8 and up. The last thing I found was this post but I did not really understand. I referenced using Visual Studio - add reference -- browse - selected from my bin dir where I stored the external compiled dlls (copied to the bin dir of my project). Can anyone tell me where the problem originates from? EDIT Adding the reference from the .NET tab fixed the problem somehow. While earlier adding from this tab resulted in a nullpointer error since it used the standard DataAnnotations delivered with the MVC1 framework instead of the freshly build one. Is it because I dropped the .dll in my bin dir that it now picks the correct one? Or why?

    Read the article

  • xVal 1.0 not generating the correct xVal.AttachValidator

    - by bastijn
    I'm currently implementing xVal client-side validation. The server-side validation is working correctly at the moment. I have referenced xVall.dll (from xVal1.0.zip) in my project as well as the System.ComponentModel.DataAnnotations and System.web.mvc.DataAnnotations from the Data Annotations Model Binder Sample found at http://aspnet.codeplex.com/releases/view/24471. I have modified the method BindProperty in the DataAnnotationsModelBinder class since it returned a nullpointer exception telling me the modelState object was null. Some blogposts described to modify the method and I did according to this SO post. Next I put the following lines in my global.asax: protected void Application_Start() { // kept same and added following line RegisterModelBinders(ModelBinders.Binders); // Add this line } public void RegisterModelBinders(ModelBinderDictionary binders) // Add this whole method { binders.DefaultBinder = new Microsoft.Web.Mvc.DataAnnotations.DataAnnotationsModelBinder(); } Now, I have made a partial class and a metadata class since I use the entity framework and you cannot create partial declarations as of yet so I have: [MetadataType(typeof(PersonMetaData))] public partial class Persons { // .... } public class PersonMetaData { private const string EmailRegEx = @"^(([^<>()[\]\\.,;:\s@\""]+" + @"(\.[^<>()[\]\\.,;:\s@\""]+)*)|(\"".+\""))@" + @"((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}" + @"\.[0-9]{1,3}\])|(([a-zA-Z\-0-9]+\.)+" + @"[a-zA-Z]{2,}))$"; [Required] public string FirstName { get; set; } [Required] public string LastName { get; set; } [Required(ErrorMessage="Please fill in your email")] [RegularExpression(EmailRegEx,ErrorMessage="Please supply a valid email address")] public string Email { get; set; } } And in my controller I have the POST edit method which currently still use a FormCollection instead of a Persons object as input. I have to change this later on but due to time constraints and some strange bug this isnt done as of yet :). It shouldnt matter though. Below it is my view. // // POST: /Jobs/Edit/5 //[CustomAuthorize(Roles = "admin,moderator")] [AcceptVerbs(HttpVerbs.Post)] public ActionResult Edit([Bind(Exclude = "Id")]FormCollection form) { Persons person = this.GetLoggedInPerson(); person.UpdatedAt = DateTime.Now; // Update the updated time. TryUpdateModel(person, null, null, new string[]{"Id"}); if (ModelState.IsValid) { repository.SaveChanges(); return RedirectToAction("Index", "ControlPanel"); } return View(person); } #endregion My view contains a partial page containing the form. In my edit.aspx I have the following code: <div class="content"> <% Html.RenderPartial("PersonForm", Model); %> </div> </div> and in the .ascx partial page: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<WerkStageNu.Persons>" %> <% if (!Model.AddressesReference.IsLoaded) { % <% Model.AddressesReference.Load(); % <% } % <%= Html.ValidationSummary("Edit was unsuccessful. Please correct the errors and try again.") % <% using (Html.BeginForm()) {%> <fieldset> <legend>General information</legend> <table> <tr> <td><label for="FirstName">FirstName:</label></td><td><%= Html.TextBox("FirstName", Model.FirstName)%><%= Html.ValidationMessage("FirstName", "*")%></td> </tr> <tr> <td><label for="LastName">LastName:</label></td><td><%= Html.TextBox("LastName", Model.LastName)%><%= Html.ValidationMessage("LastName", "*")%></td> </tr> <tr> <td><label for="Email">Email:</label></td><td><%= Html.TextBox("Email", Model.Email)%><%= Html.ValidationMessage("Email", "*")%></td> </tr> <tr> <td><label for="Telephone">Telephone:</label></td><td> <%= Html.TextBox("Telephone", Model.Telephone) %><%= Html.ValidationMessage("Telephone", "*") %></td> </tr> <tr> <td><label for="Fax">Fax:</label></td><td><%= Html.TextBox("Fax", Model.Fax) %><%= Html.ValidationMessage("Fax", "*") %></td> </tr> </table> <%--<p> <label for="GenderID"><%= Html.Encode(Resources.Forms.gender) %>:</label> <%= Html.DropDownList("GenderID", Model.Genders)%> </p> --%> </fieldset> <fieldset> <legend><%= Html.Encode(Resources.Forms.addressinformation) %></legend> <table> <tr> <td><label for="Addresses.City"><%= Html.Encode(Resources.Forms.city) %>:</label></td><td><%= Html.TextBox("Addresses.City", Model.Addresses.City)%></td> </tr> <tr> <td><label for="Addresses.Street"><%= Html.Encode(Resources.Forms.street) %>:</label></td><td><%= Html.TextBox("Addresses.Street", Model.Addresses.Street)%></td> </tr> <tr> <td><label for="Addresses.StreetNo"><%= Html.Encode(Resources.Forms.streetNumber) %>:</label></td><td><%= Html.TextBox("Addresses.StreetNo", Model.Addresses.StreetNo)%></td> </tr> <tr> <td><label for="Addresses.Country"><%= Html.Encode(Resources.Forms.county) %>:</label></td><td><%= Html.TextBox("Addresses.Country", Model.Addresses.Country)%></td> </tr> </table> </fieldset> <p> <input type="image" src="../../Content/images/save_btn.png" /> </p> <%= Html.ClientSideValidation(typeof(WerkStageNu.Persons)) %> <% } % Still nothing really stunning over here. In combination with the edited data annotation dlls this gives me server-side validation working (although i have to manually exclude the "id" property as done in the TryUpdateModel). The strange thing is that it still generates the following script in my View: xVal.AttachValidator(null, {"Fields":[{"FieldName":"ID","FieldRules": [{"RuleName":"DataType","RuleParameters":{"Type":"Integer"}}]}]}, {}) While all the found blogposts on this ( 1, 2 ) but all of those are old posts and all say it should be fixed from xVal 0.8 and up. The last thing I found was this post but I did not really understand. I referenced using Visual Studio - add reference -- browse - selected from my bin dir where I stored the external compiled dlls (copied to the bin dir of my project). Can anyone tell me where the problem originates from?

    Read the article

  • Why won't my AJAX controls work? (and ajax for .net 4 not working?)

    - by Nicklamort
    I'm totally new to ajax. I'm using VS2005. I just downloaded .NET framework 4 and so then I downloaded ajaxcontroltoolkit.binary.net4 via [http://ajaxcontroltoolkit.codeplex.com/releases/view/43475] (as opposed to ajaxcontroltoolkit.binary.net35 for .NET 3.5), but when I try to load the ajaxcontroltoolkit.dll into my toolbox (as said in the tutorials), I get the following error msg: "'C:......\ajaxcontroltoolkit.dll' is not a microsoft .NET module." First question: Why is this happening? So I tried downloading the "Recommended" ajaxcontroltoolkit.binary.net35, and it accepted the .dll file and loaded all my controls. So, I started a new website and tried to check out a combobox, and it displays, but IE is giving the follow error msg: 'Sys.Extended.UI.PositioningMode.BottomLeft' is null or not an object.' 2nd question: Why is this happening? LOL Thank you. <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %> <%@ Register Assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Namespace="System.Web.UI" TagPrefix="asp" %> <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajx" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> </head> <body> <form id="form1" runat="server"> <div> <asp:ScriptManager runat="server"> </asp:ScriptManager> <ajx:ComboBox ID="ComboBox1" runat="server"> </ajx:ComboBox> </div> </form> </body> </html> Here is my web.config: <?xml version="1.0"?> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings/> <connectionStrings/> <system.web> <pages> <controls> <add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit"/> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <compilation debug="true"> <assemblies> <add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/> <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions.Design, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> <authentication mode="Windows"/> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> </configuration>

    Read the article

  • Building applications with WPF, MVVM and Prism(aka CAG)

    - by skjagini
    In this article I am going to walk through an application using WPF and Prism (aka composite application guidance, CAG) which simulates engaging a taxi (cab).  The rules are simple, the app would have3 screens A login screen to authenticate the user An information screen. A screen to engage the cab and roam around and calculating the total fare Metered Rate of Fare The meter is required to be engaged when a cab is occupied by anyone $3.00 upon entry $0.35 for each additional unit The unit fare is: one-fifth of a mile, when the cab is traveling at 6 miles an hour or more; or 60 seconds when not in motion or traveling at less than 12 miles per hour. Night surcharge of $.50 after 8:00 PM & before 6:00 AM Peak hour Weekday Surcharge of $1.00 Monday - Friday after 4:00 PM & before 8:00 PM New York State Tax Surcharge of $.50 per ride. Example: Friday (2010-10-08) 5:30pm Start at Lexington Ave & E 57th St End at Irving Pl & E 15th St Start = $3.00 Travels 2 miles at less than 6 mph for 15 minutes = $3.50 Travels at more than 12 mph for 5 minutes = $1.75 Peak hour Weekday Surcharge = $1.00 (ride started at 5:30 pm) New York State Tax Surcharge = $0.50 Before we dive into the app, I would like to give brief description about the framework.  If you want to jump on to the source code, scroll all the way to the end of the post. MVVM MVVM pattern is in no way related to the usage of PRISM in your application and should be considered if you are using WPF irrespective of PRISM or not. Lets say you are not familiar with MVVM, your typical UI would involve adding some UI controls like text boxes, a button, double clicking on the button,  generating event handler, calling a method from business layer and updating the user interface, it works most of the time for developing small scale applications. The problem with this approach is that there is some amount of code specific to business logic wrapped in UI specific code which is hard to unit test it, mock it and MVVM helps to solve the exact problem. MVVM stands for Model(M) – View(V) – ViewModel(VM),  based on the interactions with in the three parties it should be called VVMM,  MVVM sounds more like MVC (Model-View-Controller) so the name. Why it should be called VVMM: View – View Model - Model WPF allows to create user interfaces using XAML and MVVM takes it to the next level by allowing complete separation of user interface and business logic. In WPF each view will have a property, DataContext when set to an instance of a class (which happens to be your view model) provides the data the view is interested in, i.e., view interacts with view model and at the same time view model interacts with view through DataContext. Sujith, if view and view model are interacting directly with each other how does MVVM is helping me separation of concerns? Well, the catch is DataContext is of type Object, since it is of type object view doesn’t know exact type of view model allowing views and views models to be loosely coupled. View models aggregate data from models (data access layer, services, etc) and make it available for views through properties, methods etc, i.e., View Models interact with Models. PRISM Prism is provided by Microsoft Patterns and Practices team and it can be downloaded from codeplex for source code,  samples and documentation on msdn.  The name composite implies, to compose user interface from different modules (views) without direct dependencies on each other, again allowing  loosely coupled development. Well Sujith, I can already do that with user controls, why shall I learn another framework?  That’s correct, you can decouple using user controls, but you still have to manage some amount of coupling, like how to do you communicate between the controls, how do you subscribe/unsubscribe, loading/unloading views dynamically. Prism is not a replacement for user controls, provides the following features which greatly help in designing the composite applications. Dependency Injection (DI)/ Inversion of Control (IoC) Modules Regions Event Aggregator  Commands Simply put, MVVM helps building a single view and Prism helps building an application using the views There are other open source alternatives to Prism, like MVVMLight, Cinch, take a look at them as well. Lets dig into the source code.  1. Solution The solution is made of the following projects Framework: Holds the common functionality in building applications using WPF and Prism TaxiClient: Start up project, boot strapping and app styling TaxiCommon: Helps with the business logic TaxiModules: Holds the meat of the application with views and view models TaxiTests: To test the application 2. DI / IoC Dependency Injection (DI) as the name implies refers to injecting dependencies and Inversion of Control (IoC) means the calling code has no direct control on the dependencies, opposite of normal way of programming where dependencies are passed by caller, i.e inversion; aside from some differences in terminology the concept is same in both the cases. The idea behind DI/IoC pattern is to reduce the amount of direct coupling between different components of the application, the higher the dependency the more tightly coupled the application resulting in code which is hard to modify, unit test and mock.  Initializing Dependency Injection through BootStrapper TaxiClient is the starting project of the solution and App (App.xaml)  is the starting class that gets called when you run the application. From the App’s OnStartup method we will invoke BootStrapper.   namespace TaxiClient { /// <summary> /// Interaction logic for App.xaml /// </summary> public partial class App : Application { protected override void OnStartup(StartupEventArgs e) { base.OnStartup(e);   (new BootStrapper()).Run(); } } } BootStrapper is your contact point for initializing the application including dependency injection, creating Shell and other frameworks. We are going to use Unity for DI and there are lot of open source DI frameworks like Spring.Net, StructureMap etc with different feature set  and you can choose a framework based on your preferences. Note that Prism comes with in built support for Unity, for example we are deriving from UnityBootStrapper in our case and for any other DI framework you have to extend the Prism appropriately   namespace TaxiClient { public class BootStrapper: UnityBootstrapper { protected override IModuleCatalog CreateModuleCatalog() { return new ConfigurationModuleCatalog(); } protected override DependencyObject CreateShell() { Framework.FrameworkBootStrapper.Run(Container, Application.Current.Dispatcher);   Shell shell = new Shell(); shell.ResizeMode = ResizeMode.NoResize; shell.Show();   return shell; } } } Lets take a look into  FrameworkBootStrapper to check out how to register with unity container. namespace Framework { public class FrameworkBootStrapper { public static void Run(IUnityContainer container, Dispatcher dispatcher) { UIDispatcher uiDispatcher = new UIDispatcher(dispatcher); container.RegisterInstance<IDispatcherService>(uiDispatcher);   container.RegisterType<IInjectSingleViewService, InjectSingleViewService>( new ContainerControlledLifetimeManager());   . . . } } } In the above code we are registering two components with unity container. You shall observe that we are following two different approaches, RegisterInstance and RegisterType.  With RegisterInstance we are registering an existing instance and the same instance will be returned for every request made for IDispatcherService   and with RegisterType we are requesting unity container to create an instance for us when required, i.e., when I request for an instance for IInjectSingleViewService, unity will create/return an instance of InjectSingleViewService class and with RegisterType we can configure the life time of the instance being created. With ContaienrControllerLifetimeManager, the unity container caches the instance and reuses for any subsequent requests, without recreating a new instance. Lets take a look into FareViewModel.cs and it’s constructor. The constructor takes one parameter IEventAggregator and if you try to find all references in your solution for IEventAggregator, you will not find a single location where an instance of EventAggregator is passed directly to the constructor. The compiler still finds an instance and works fine because Prism is already configured when used with Unity container to return an instance of EventAggregator when requested for IEventAggregator and in this particular case it is called constructor injection. public class FareViewModel:ObservableBase, IDataErrorInfo { ... private IEventAggregator _eventAggregator;   public FareViewModel(IEventAggregator eventAggregator) { _eventAggregator = eventAggregator; InitializePropertyNames(); InitializeModel(); PropertyChanged += OnPropertyChanged; } ... 3. Shell Shells are very similar in operation to Master Pages in asp.net or MDI in Windows Forms. And shells contain regions which display the views, you can have as many regions as you wish in a given view. You can also nest regions. i.e, one region can load a view which in itself may contain other regions. We have to create a shell at the start of the application and are doing it by overriding CreateShell method from BootStrapper From the following Shell.xaml you shall notice that we have two content controls with Region names as ‘MenuRegion’ and ‘MainRegion’.  The idea here is that you can inject any user controls into the regions dynamically, i.e., a Menu User Control for MenuRegion and based on the user action you can load appropriate view into MainRegion.    <Window x:Class="TaxiClient.Shell" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Regions="clr-namespace:Microsoft.Practices.Prism.Regions;assembly=Microsoft.Practices.Prism" Title="Taxi" Height="370" Width="800"> <Grid Margin="2"> <ContentControl Regions:RegionManager.RegionName="MenuRegion" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" HorizontalContentAlignment="Stretch" VerticalContentAlignment="Stretch" />   <ContentControl Grid.Row="1" Regions:RegionManager.RegionName="MainRegion" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" HorizontalContentAlignment="Stretch" VerticalContentAlignment="Stretch" /> <!--<Border Grid.ColumnSpan="2" BorderThickness="2" CornerRadius="3" BorderBrush="LightBlue" />-->   </Grid> </Window> 4. Modules Prism provides the ability to build composite applications and modules play an important role in it. For example if you are building a Mortgage Loan Processor application with 3 components, i.e. customer’s credit history,  existing mortgages, new home/loan information; and consider that the customer’s credit history component involves gathering data about his/her address, background information, job details etc. The idea here using Prism modules is to separate the implementation of these 3 components into their own visual studio projects allowing to build components with no dependency on each other and independently. If we need to add another component to the application, the component can be developed by in house team or some other team in the organization by starting with a new Visual Studio project and adding to the solution at the run time with very little knowledge about the application. Prism modules are defined by implementing the IModule interface and each visual studio project to be considered as a module should implement the IModule interface.  From the BootStrapper.cs you shall observe that we are overriding the method by returning a ConfiguratingModuleCatalog which returns the modules that are registered for the application using the app.config file  and you can also add module using code. Lets take a look into configuration file.   <?xml version="1.0"?> <configuration> <configSections> <section name="modules" type="Microsoft.Practices.Prism.Modularity.ModulesConfigurationSection, Microsoft.Practices.Prism"/> </configSections> <modules> <module assemblyFile="TaxiModules.dll" moduleType="TaxiModules.ModuleInitializer, TaxiModules" moduleName="TaxiModules"/> </modules> </configuration> Here we are adding TaxiModules project to our solution and TaxiModules.ModuleInitializer implements IModule interface   5. Module Mapper With Prism modules you can dynamically add or remove modules from the regions, apart from that Prism also provides API to control adding/removing the views from a region within the same module. Taxi Information Screen: Engage the Taxi Screen: The sample application has two screens, ‘Taxi Information’ and ‘Engage the Taxi’ and they both reside in same module, TaxiModules. ‘Engage the Taxi’ is again made of two user controls, FareView on the left and TotalView on the right. We have created a Shell with two regions, MenuRegion and MainRegion with menu loaded into MenuRegion. We can create a wrapper user control called EngageTheTaxi made of FareView and TotalView and load either TaxiInfo or EngageTheTaxi into MainRegion based on the user action. Though it will work it tightly binds the user controls and for every combination of user controls, we need to create a dummy wrapper control to contain them. Instead we can apply the principles we learned so far from Shell/regions and introduce another template (LeftAndRightRegionView.xaml) made of two regions Region1 (left) and Region2 (right) and load  FareView and TotalView dynamically.  To help with loading of the views dynamically I have introduce an helper an interface, IInjectSingleViewService,  idea suggested by Mike Taulty, a must read blog for .Net developers. using System; using System.Collections.Generic; using System.ComponentModel;   namespace Framework.PresentationUtility.Navigation {   public interface IInjectSingleViewService : INotifyPropertyChanged { IEnumerable<CommandViewDefinition> Commands { get; } IEnumerable<ModuleViewDefinition> Modules { get; }   void RegisterViewForRegion(string commandName, string viewName, string regionName, Type viewType); void ClearViewFromRegion(string viewName, string regionName); void RegisterModule(string moduleName, IList<ModuleMapper> moduleMappers); } } The Interface declares three methods to work with views: RegisterViewForRegion: Registers a view with a particular region. You can register multiple views and their regions under one command.  When this particular command is invoked all the views registered under it will be loaded into their regions. ClearViewFromRegion: To unload a specific view from a region. RegisterModule: The idea is when a command is invoked you can load the UI with set of controls in their default position and based on the user interaction, you can load different contols in to different regions on the fly.  And it is supported ModuleViewDefinition and ModuleMappers as shown below. namespace Framework.PresentationUtility.Navigation { public class ModuleViewDefinition { public string ModuleName { get; set; } public IList<ModuleMapper> ModuleMappers; public ICommand Command { get; set; } }   public class ModuleMapper { public string ViewName { get; set; } public string RegionName { get; set; } public Type ViewType { get; set; } } } 6. Event Aggregator Prism event aggregator enables messaging between components as in Observable pattern, Notifier notifies the Observer which receives notification it is interested in. When it comes to Observable pattern, Observer has to unsubscribes for notifications when it no longer interested in notifications, which allows the Notifier to remove the Observer’s reference from it’s local cache. Though .Net has managed garbage collection it cannot remove inactive the instances referenced by an active instance resulting in memory leak, keeping the Observers in memory as long as Notifier stays in memory.  Developers have to be very careful to unsubscribe when necessary and it often gets overlooked, to overcome these problems Prism Event Aggregator uses weak references to cache the reference (Observer in this case)  and releases the reference (memory) once the instance goes out of scope. Using event aggregator is very simple, declare a generic type of CompositePresenationEvent by inheriting from it. using Microsoft.Practices.Prism.Events; using TaxiCommon.BAO;   namespace TaxiCommon.CompositeEvents { public class TaxiOnMoveEvent:CompositePresentationEvent<TaxiOnMove> { } }   TaxiOnMove.cs includes the properties which we want to exchange between the parties, FareView and TotalView. using System;   namespace TaxiCommon.BAO { public class TaxiOnMove { public TimeSpan MinutesAtTweleveMPH { get; set; } public double MilesAtSixMPH { get; set; } } }   Lets take a look into FareViewodel (Notifier) and how it raises the event.  Here we are raising the event by getting the event through GetEvent<..>() and publishing it with the payload private void OnAddMinutes(object obj) { TaxiOnMove payload = new TaxiOnMove(); if(MilesAtSixMPH != null) payload.MilesAtSixMPH = MilesAtSixMPH.Value; if(MinutesAtTweleveMPH != null) payload.MinutesAtTweleveMPH = new TimeSpan(0,0,MinutesAtTweleveMPH.Value,0);   _eventAggregator.GetEvent<TaxiOnMoveEvent>().Publish(payload); ResetMinutesAndMiles(); } And TotalViewModel(Observer) subscribes to notifications by getting the event through GetEvent<..>() namespace TaxiModules.ViewModels { public class TotalViewModel:ObservableBase { .... private IEventAggregator _eventAggregator;   public TotalViewModel(IEventAggregator eventAggregator) { _eventAggregator = eventAggregator; ... }   private void SubscribeToEvents() { _eventAggregator.GetEvent<TaxiStartedEvent>() .Subscribe(OnTaxiStarted, ThreadOption.UIThread,false,(filter) => true); _eventAggregator.GetEvent<TaxiOnMoveEvent>() .Subscribe(OnTaxiMove, ThreadOption.UIThread, false, (filter) => true); _eventAggregator.GetEvent<TaxiResetEvent>() .Subscribe(OnTaxiReset, ThreadOption.UIThread, false, (filter) => true); }   ... private void OnTaxiMove(TaxiOnMove taxiOnMove) { OnMoveFare fare = new OnMoveFare(taxiOnMove); Fares.Add(fare); SetTotalFare(new []{fare}); }   .... 7. MVVM through example In this section we are going to look into MVVM implementation through example.  I have all the modules declared in a single project, TaxiModules, again it is not necessary to have them into one project. Once the user logs into the application, will be greeted with the ‘Engage the Taxi’ screen which is made of two user controls, FareView.xaml and TotalView.Xaml. As you can see from the solution explorer, each of them have their own code behind files and  ViewModel classes, FareViewMode.cs, TotalViewModel.cs Lets take a look in to the FareView and how it interacts with FareViewModel using MVVM implementation. FareView.xaml acts as a view and FareViewMode.cs is it’s view model. The FareView code behind class   namespace TaxiModules.Views { /// <summary> /// Interaction logic for FareView.xaml /// </summary> public partial class FareView : UserControl { public FareView(FareViewModel viewModel) { InitializeComponent(); this.Loaded += (s, e) => { this.DataContext = viewModel; }; } } } The FareView is bound to FareViewModel through the data context  and you shall observe that DataContext is of type Object, i.e. the FareView doesn’t really know the type of ViewModel (FareViewModel). This helps separation of View and ViewModel as View and ViewModel are independent of each other, you can bind FareView to FareViewModel2 as well and the application compiles just fine. Lets take a look into FareView xaml file  <UserControl x:Class="TaxiModules.Views.FareView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Toolkit="clr-namespace:Microsoft.Windows.Controls;assembly=WPFToolkit" xmlns:Commands="clr-namespace:Microsoft.Practices.Prism.Commands;assembly=Microsoft.Practices.Prism"> <Grid Margin="10" > ....   <Border Style="{DynamicResource innerBorder}" Grid.Row="0" Grid.Column="0" Grid.RowSpan="11" Grid.ColumnSpan="2" Panel.ZIndex="1"/>   <Label Grid.Row="0" Content="Engage the Taxi" Style="{DynamicResource innerHeader}"/> <Label Grid.Row="1" Content="Select the State"/> <ComboBox Grid.Row="1" Grid.Column="1" ItemsSource="{Binding States}" Height="auto"> <ComboBox.ItemTemplate> <DataTemplate> <TextBlock Text="{Binding Name}"/> </DataTemplate> </ComboBox.ItemTemplate> <ComboBox.SelectedItem> <Binding Path="SelectedState" Mode="TwoWay"/> </ComboBox.SelectedItem> </ComboBox> <Label Grid.Row="2" Content="Select the Date of Entry"/> <Toolkit:DatePicker Grid.Row="2" Grid.Column="1" SelectedDate="{Binding DateOfEntry, ValidatesOnDataErrors=true}" /> <Label Grid.Row="3" Content="Enter time 24hr format"/> <TextBox Grid.Row="3" Grid.Column="1" Text="{Binding TimeOfEntry, TargetNullValue=''}"/> <Button Grid.Row="4" Grid.Column="1" Content="Start the Meter" Commands:Click.Command="{Binding StartMeterCommand}" />   <Label Grid.Row="5" Content="Run the Taxi" Style="{DynamicResource innerHeader}"/> <Label Grid.Row="6" Content="Number of Miles &lt;@6mph"/> <TextBox Grid.Row="6" Grid.Column="1" Text="{Binding MilesAtSixMPH, TargetNullValue='', ValidatesOnDataErrors=true}"/> <Label Grid.Row="7" Content="Number of Minutes @12mph"/> <TextBox Grid.Row="7" Grid.Column="1" Text="{Binding MinutesAtTweleveMPH, TargetNullValue=''}"/> <Button Grid.Row="8" Grid.Column="1" Content="Add Minutes and Miles " Commands:Click.Command="{Binding AddMinutesCommand}"/> <Label Grid.Row="9" Content="Other Operations" Style="{DynamicResource innerHeader}"/> <Button Grid.Row="10" Grid.Column="1" Content="Reset the Meter" Commands:Click.Command="{Binding ResetCommand}"/>   </Grid> </UserControl> The highlighted code from the above code shows data binding, for example ComboBox which displays list of states has it’s ItemsSource bound to States property, with DataTemplate bound to Name and SelectedItem  to SelectedState. You might be wondering what are all these properties and how it is able to bind to them.  The answer lies in data context, i.e., when you bound a control, WPF looks for data context on the root object (Grid in this case) and if it can’t find data context it will look into root’s root, i.e. FareView UserControl and it is bound to FareViewModel.  Each of those properties have be declared on the ViewModel for the View to bind correctly. To put simply, View is bound to ViewModel through data context of type object and every control that is bound on the View actually binds to the public property on the ViewModel. Lets look into the ViewModel code (the following code is not an exact copy of FareViewMode.cs, pasted relevant code for this section)   namespace TaxiModules.ViewModels { public class FareViewModel:ObservableBase, IDataErrorInfo { public List<USState> States { get { return USStates.StateList; } }   public USState SelectedState { get { return _selectedState; } set { _selectedState = value; RaisePropertyChanged(_selectedStatePropertyName); } }   public DateTime? DateOfEntry { get { return _dateOfEntry; } set { _dateOfEntry = value; RaisePropertyChanged(_dateOfEntryPropertyName); } }   public TimeSpan? TimeOfEntry { get { return _timeOfEntry; } set { _timeOfEntry = value; RaisePropertyChanged(_timeOfEntryPropertyName); } }   public double? MilesAtSixMPH { get { return _milesAtSixMPH; } set { _milesAtSixMPH = value; RaisePropertyChanged(_distanceAtSixMPHPropertyName); } }   public int? MinutesAtTweleveMPH { get { return _minutesAtTweleveMPH; } set { _minutesAtTweleveMPH = value; RaisePropertyChanged(_minutesAtTweleveMPHPropertyName); } }   public ICommand StartMeterCommand { get { if(_startMeterCommand == null) { _startMeterCommand = new DelegateCommand<object>(OnStartMeter, CanStartMeter); } return _startMeterCommand; } }   public ICommand AddMinutesCommand { get { if(_addMinutesCommand == null) { _addMinutesCommand = new DelegateCommand<object>(OnAddMinutes, CanAddMinutes); } return _addMinutesCommand; } }   public ICommand ResetCommand { get { if(_resetCommand == null) { _resetCommand = new DelegateCommand<object>(OnResetCommand); } return _resetCommand; } }   } private void OnStartMeter(object obj) { _eventAggregator.GetEvent<TaxiStartedEvent>().Publish( new TaxiStarted() { EngagedOn = DateOfEntry.Value.Date + TimeOfEntry.Value, EngagedState = SelectedState.Value });   _isMeterStarted = true; OnPropertyChanged(this,null); } And views communicate user actions like button clicks, tree view item selections, etc using commands. When user clicks on ‘Start the Meter’ button it invokes the method StartMeterCommand, which calls the method OnStartMeter which publishes the event to TotalViewModel using event aggregator  and TaxiStartedEvent. namespace TaxiModules.ViewModels { public class TotalViewModel:ObservableBase { ... private IEventAggregator _eventAggregator;   public TotalViewModel(IEventAggregator eventAggregator) { _eventAggregator = eventAggregator;   InitializePropertyNames(); InitializeModel(); SubscribeToEvents(); }   public decimal? TotalFare { get { return _totalFare; } set { _totalFare = value; RaisePropertyChanged(_totalFarePropertyName); } } .... private void SubscribeToEvents() { _eventAggregator.GetEvent<TaxiStartedEvent>().Subscribe(OnTaxiStarted, ThreadOption.UIThread,false,(filter) => true); _eventAggregator.GetEvent<TaxiOnMoveEvent>().Subscribe(OnTaxiMove, ThreadOption.UIThread, false, (filter) => true); _eventAggregator.GetEvent<TaxiResetEvent>().Subscribe(OnTaxiReset, ThreadOption.UIThread, false, (filter) => true); }   private void OnTaxiStarted(TaxiStarted taxiStarted) { Fares.Add(new EntryFare()); Fares.Add(new StateTaxFare(taxiStarted)); Fares.Add(new NightSurchargeFare(taxiStarted)); Fares.Add(new PeakHourWeekdayFare(taxiStarted));   SetTotalFare(Fares); }   private void SetTotalFare(IEnumerable<IFare> fares) { TotalFare = (_totalFare ?? 0) + TaxiFareHelper.GetTotalFare(fares); } ....   } }   TotalViewModel subscribes to events, TaxiStartedEvent and rest. When TaxiStartedEvent gets invoked it calls the OnTaxiStarted method which sets the total fare which includes entry fee, state tax, nightly surcharge, peak hour weekday fare.   Note that TotalViewModel derives from ObservableBase which implements the method RaisePropertyChanged which we are invoking in Set of TotalFare property, i.e, once we update the TotalFare property it raises an the event that  allows the TotalFare text box to fetch the new value through the data context. ViewModel is communicating with View through data context and it has no knowledge about View, helping in loose coupling of ViewModel and View.   I have attached the source code (.Net 4.0, Prism 4.0, VS 2010) , download and play with it and don’t forget to leave your comments.  

    Read the article

  • What&rsquo;s New in ASP.NET 4.0 Part Two: WebForms and Visual Studio Enhancements

    - by Rick Strahl
    In the last installment I talked about the core changes in the ASP.NET runtime that I’ve been taking advantage of. In this column, I’ll cover the changes to the Web Forms engine and some of the cool improvements in Visual Studio that make Web and general development easier. WebForms The WebForms engine is the area that has received most significant changes in ASP.NET 4.0. Probably the most widely anticipated features are related to managing page client ids and of ViewState on WebForm pages. Take Control of Your ClientIDs Unique ClientID generation in ASP.NET has been one of the most complained about “features” in ASP.NET. Although there’s a very good technical reason for these unique generated ids - they guarantee unique ids for each and every server control on a page - these unique and generated ids often get in the way of client-side JavaScript development and CSS styling as it’s often inconvenient and fragile to work with the long, generated ClientIDs. In ASP.NET 4.0 you can now specify an explicit client id mode on each control or each naming container parent control to control how client ids are generated. By default, ASP.NET generates mangled client ids for any control contained in a naming container (like a Master Page, or a User Control for example). The key to ClientID management in ASP.NET 4.0 are the new ClientIDMode and ClientIDRowSuffix properties. ClientIDMode supports four different ClientID generation settings shown below. For the following examples, imagine that you have a Textbox control named txtName inside of a master page control container on a WebForms page. <%@Page Language="C#"      MasterPageFile="~/Site.Master"     CodeBehind="WebForm2.aspx.cs"     Inherits="WebApplication1.WebForm2"  %> <asp:Content ID="content"  ContentPlaceHolderID="content"               runat="server"               ClientIDMode="Static" >       <asp:TextBox runat="server" ID="txtName" /> </asp:Content> The four available ClientIDMode values are: AutoID This is the existing behavior in ASP.NET 1.x-3.x where full naming container munging takes place. <input name="ctl00$content$txtName" type="text"        id="ctl00_content_txtName" /> This should be familiar to any ASP.NET developer and results in fairly unpredictable client ids that can easily change if the containership hierarchy changes. For example, removing the master page changes the name in this case, so if you were to move a block of script code that works against the control to a non-Master page, the script code immediately breaks. Static This option is the most deterministic setting that forces the control’s ClientID to use its ID value directly. No naming container naming at all is applied and you end up with clean client ids: <input name="ctl00$content$txtName"         type="text" id="txtName" /> Note that the name property which is used for postback variables to the server still is munged, but the ClientID property is displayed simply as the ID value that you have assigned to the control. This option is what most of us want to use, but you have to be clear on that because it can potentially cause conflicts with other controls on the page. If there are several instances of the same naming container (several instances of the same user control for example) there can easily be a client id naming conflict. Note that if you assign Static to a data-bound control, like a list child control in templates, you do not get unique ids either, so for list controls where you rely on unique id for child controls, you’ll probably want to use Predictable rather than Static. I’ll write more on this a little later when I discuss ClientIDRowSuffix. Predictable The previous two values are pretty self-explanatory. Predictable however, requires some explanation. To me at least it’s not in the least bit predictable. MSDN defines this value as follows: This algorithm is used for controls that are in data-bound controls. The ClientID value is generated by concatenating the ClientID value of the parent naming container with the ID value of the control. If the control is a data-bound control that generates multiple rows, the value of the data field specified in the ClientIDRowSuffix property is added at the end. For the GridView control, multiple data fields can be specified. If the ClientIDRowSuffix property is blank, a sequential number is added at the end instead of a data-field value. Each segment is separated by an underscore character (_). The key that makes this value a bit confusing is that it relies on the parent NamingContainer’s ClientID to build its own ClientID value. This effectively means that the value is not predictable at all but rather very tightly coupled to the parent naming container’s ClientIDMode setting. For my simple textbox example, if the ClientIDMode property of the parent naming container (Page in this case) is set to “Predictable” you’ll get this: <input name="ctl00$content$txtName" type="text"         id="content_txtName" /> which gives an id that based on walking up to the currently active naming container (the MasterPage content container) and starting the id formatting from there downward. Think of this as a semi unique name that’s guaranteed unique only for the naming container. If, on the other hand, the Page is set to “AutoID” you get the following with Predictable on txtName: <input name="ctl00$content$txtName" type="text"         id="ctl00_content_txtName" /> The latter is effectively the same as if you specified AutoID because it inherits the AutoID naming from the Page and Content Master Page control of the page. But again - predictable behavior always depends on the parent naming container and how it generates its id, so the id may not always be exactly the same as the AutoID generated value because somewhere in the NamingContainer chain the ClientIDMode setting may be set to a different value. For example, if you had another naming container in the middle that was set to Static you’d end up effectively with an id that starts with the NamingContainers id rather than the whole ctl000_content munging. The most common use for Predictable is likely to be for data-bound controls, which results in each data bound item getting a unique ClientID. Unfortunately, even here the behavior can be very unpredictable depending on which data-bound control you use - I found significant differences in how template controls in a GridView behave from those that are used in a ListView control. For example, GridView creates clean child ClientIDs, while ListView still has a naming container in the ClientID, presumably because of the template container on which you can’t set ClientIDMode. Predictable is useful, but only if all naming containers down the chain use this setting. Otherwise you’re right back to the munged ids that are pretty unpredictable. Another property, ClientIDRowSuffix, can be used in combination with ClientIDMode of Predictable to force a suffix onto list client controls. For example: <asp:GridView runat="server" ID="gvItems"              AutoGenerateColumns="false"             ClientIDMode="Static"              ClientIDRowSuffix="Id">     <Columns>     <asp:TemplateField>         <ItemTemplate>             <asp:Label runat="server" id="txtName"                        Text='<%# Eval("Name") %>'                   ClientIDMode="Predictable"/>         </ItemTemplate>     </asp:TemplateField>     <asp:TemplateField>         <ItemTemplate>         <asp:Label runat="server" id="txtId"                     Text='<%# Eval("Id") %>'                     ClientIDMode="Predictable" />         </ItemTemplate>     </asp:TemplateField>     </Columns>  </asp:GridView> generates client Ids inside of a column in the master page described earlier: <td>     <span id="txtName_0">Rick</span> </td> where the value after the underscore is the ClientIDRowSuffix field - in this case “Id” of the item data bound to the control. Note that all of the child controls require ClientIDMode=”Predictable” in order for the ClientIDRowSuffix to be applied, and the parent GridView controls need to be set to Static either explicitly or via Naming Container inheritance to give these simple names. It’s a bummer that ClientIDRowSuffix doesn’t work with Static to produce this automatically. Another real problem is that other controls process the ClientIDMode differently. For example, a ListView control processes the Predictable ClientIDMode differently and produces the following with the Static ListView and Predictable child controls: <span id="ctrl0_txtName_0">Rick</span> I couldn’t even figure out a way using ClientIDMode to get a simple ID that also uses a suffix short of falling back to manually generated ids using <%= %> expressions instead. Given the inconsistencies inside of list controls using <%= %>, ids for the ListView might not be a bad idea anyway. Inherit The final setting is Inherit, which is the default for all controls except Page. This means that controls by default inherit the parent naming container’s ClientIDMode setting. For more detailed information on ClientID behavior and different scenarios you can check out a blog post of mine on this subject: http://www.west-wind.com/weblog/posts/54760.aspx. ClientID Enhancements Summary The ClientIDMode property is a welcome addition to ASP.NET 4.0. To me this is probably the most useful WebForms feature as it allows me to generate clean IDs simply by setting ClientIDMode="Static" on either the page or inside of Web.config (in the Pages section) which applies the setting down to the entire page which is my 95% scenario. For the few cases when it matters - for list controls and inside of multi-use user controls or custom server controls) - I can use Predictable or even AutoID to force controls to unique names. For application-level page development, this is easy to accomplish and provides maximum usability for working with client script code against page controls. ViewStateMode Another area of large criticism for WebForms is ViewState. ViewState is used internally by ASP.NET to persist page-level changes to non-postback properties on controls as pages post back to the server. It’s a useful mechanism that works great for the overall mechanics of WebForms, but it can also cause all sorts of overhead for page operation as ViewState can very quickly get out of control and consume huge amounts of bandwidth in your page content. ViewState can also wreak havoc with client-side scripting applications that modify control properties that are tracked by ViewState, which can produce very unpredictable results on a Postback after client-side updates. Over the years in my own development, I’ve often turned off ViewState on pages to reduce overhead. Yes, you lose some functionality, but you can easily implement most of the common functionality in non-ViewState workarounds. Relying less on heavy ViewState controls and sticking with simpler controls or raw HTML constructs avoids getting around ViewState problems. In ASP.NET 3.x and prior, it wasn’t easy to control ViewState - you could turn it on or off and if you turned it off at the page or web.config level, you couldn’t turn it back on for specific controls. In short, it was an all or nothing approach. With ASP.NET 4.0, the new ViewStateMode property gives you more control. It allows you to disable ViewState globally either on the page or web.config level and then turn it back on for specific controls that might need it. ViewStateMode only works when EnableViewState="true" on the page or web.config level (which is the default). You can then use ViewStateMode of Disabled, Enabled or Inherit to control the ViewState settings on the page. If you’re shooting for minimal ViewState usage, the ideal situation is to set ViewStateMode to disabled on the Page or web.config level and only turn it back on particular controls: <%@Page Language="C#"      CodeBehind="WebForm2.aspx.cs"     Inherits="Westwind.WebStore.WebForm2"        ClientIDMode="Static"                ViewStateMode="Disabled"     EnableViewState="true"  %> <!-- this control has viewstate  --> <asp:TextBox runat="server" ID="txtName"  ViewStateMode="Enabled" />       <!-- this control has no viewstate - it inherits  from parent container --> <asp:TextBox runat="server" ID="txtAddress" /> Note that the EnableViewState="true" at the Page level isn’t required since it’s the default, but it’s important that the value is true. ViewStateMode has no effect if EnableViewState="false" at the page level. The main benefit of ViewStateMode is that it allows you to more easily turn off ViewState for most of the page and enable only a few key controls that might need it. For me personally, this is a perfect combination as most of my WebForm apps can get away without any ViewState at all. But some controls - especially third party controls - often don’t work well without ViewState enabled, and now it’s much easier to selectively enable controls rather than the old way, which required you to pretty much turn off ViewState for all controls that you didn’t want ViewState on. Inline HTML Encoding HTML encoding is an important feature to prevent cross-site scripting attacks in data entered by users on your site. In order to make it easier to create HTML encoded content, ASP.NET 4.0 introduces a new Expression syntax using <%: %> to encode string values. The encoding expression syntax looks like this: <%: "<script type='text/javascript'>" +     "alert('Really?');</script>" %> which produces properly encoded HTML: &lt;script type=&#39;text/javascript&#39; &gt;alert(&#39;Really?&#39;);&lt;/script&gt; Effectively this is a shortcut to: <%= HttpUtility.HtmlEncode( "<script type='text/javascript'>" + "alert('Really?');</script>") %> Of course the <%: %> syntax can also evaluate expressions just like <%= %> so the more common scenario applies this expression syntax against data your application is displaying. Here’s an example displaying some data model values: <%: Model.Address.Street %> This snippet shows displaying data from your application’s data store or more importantly, from data entered by users. Anything that makes it easier and less verbose to HtmlEncode text is a welcome addition to avoid potential cross-site scripting attacks. Although I listed Inline HTML Encoding here under WebForms, anything that uses the WebForms rendering engine including ASP.NET MVC, benefits from this feature. ScriptManager Enhancements The ASP.NET ScriptManager control in the past has introduced some nice ways to take programmatic and markup control over script loading, but there were a number of shortcomings in this control. The ASP.NET 4.0 ScriptManager has a number of improvements that make it easier to control script loading and addresses a few of the shortcomings that have often kept me from using the control in favor of manual script loading. The first is the AjaxFrameworkMode property which finally lets you suppress loading the ASP.NET AJAX runtime. Disabled doesn’t load any ASP.NET AJAX libraries, but there’s also an Explicit mode that lets you pick and choose the library pieces individually and reduce the footprint of ASP.NET AJAX script included if you are using the library. There’s also a new EnableCdn property that forces any script that has a new WebResource attribute CdnPath property set to a CDN supplied URL. If the script has this Attribute property set to a non-null/empty value and EnableCdn is enabled on the ScriptManager, that script will be served from the specified CdnPath. [assembly: WebResource(    "Westwind.Web.Resources.ww.jquery.js",    "application/x-javascript",    CdnPath =  "http://mysite.com/scripts/ww.jquery.min.js")] Cool, but a little too static for my taste since this value can’t be changed at runtime to point at a debug script as needed, for example. Assembly names for loading scripts from resources can now be simple names rather than fully qualified assembly names, which make it less verbose to reference scripts from assemblies loaded from your bin folder or the assembly reference area in web.config: <asp:ScriptManager runat="server" id="Id"          EnableCdn="true"         AjaxFrameworkMode="disabled">     <Scripts>         <asp:ScriptReference          Name="Westwind.Web.Resources.ww.jquery.js"         Assembly="Westwind.Web" />     </Scripts>        </asp:ScriptManager> The ScriptManager in 4.0 also supports script combining via the CompositeScript tag, which allows you to very easily combine scripts into a single script resource served via ASP.NET. Even nicer: You can specify the URL that the combined script is served with. Check out the following script manager markup that combines several static file scripts and a script resource into a single ASP.NET served resource from a static URL (allscripts.js): <asp:ScriptManager runat="server" id="Id"          EnableCdn="true"         AjaxFrameworkMode="disabled">     <CompositeScript          Path="~/scripts/allscripts.js">         <Scripts>             <asp:ScriptReference                    Path="~/scripts/jquery.js" />             <asp:ScriptReference                    Path="~/scripts/ww.jquery.js" />             <asp:ScriptReference            Name="Westwind.Web.Resources.editors.js"                 Assembly="Westwind.Web" />         </Scripts>     </CompositeScript> </asp:ScriptManager> When you render this into HTML, you’ll see a single script reference in the page: <script src="scripts/allscripts.debug.js"          type="text/javascript"></script> All you need to do to make this work is ensure that allscripts.js and allscripts.debug.js exist in the scripts folder of your application - they can be empty but the file has to be there. This is pretty cool, but you want to be real careful that you use unique URLs for each combination of scripts you combine or else browser and server caching will easily screw you up royally. The script manager also allows you to override native ASP.NET AJAX scripts now as any script references defined in the Scripts section of the ScriptManager trump internal references. So if you want custom behavior or you want to fix a possible bug in the core libraries that normally are loaded from resources, you can now do this simply by referencing the script resource name in the Name property and pointing at System.Web for the assembly. Not a common scenario, but when you need it, it can come in real handy. Still, there are a number of shortcomings in this control. For one, the ScriptManager and ClientScript APIs still have no common entry point so control developers are still faced with having to check and support both APIs to load scripts so that controls can work on pages that do or don’t have a ScriptManager on the page. The CdnUrl is static and compiled in, which is very restrictive. And finally, there’s still no control over where scripts get loaded on the page - ScriptManager still injects scripts into the middle of the HTML markup rather than in the header or optionally the footer. This, in turn, means there is little control over script loading order, which can be problematic for control developers. MetaDescription, MetaKeywords Page Properties There are also a number of additional Page properties that correspond to some of the other features discussed in this column: ClientIDMode, ClientTarget and ViewStateMode. Another minor but useful feature is that you can now directly access the MetaDescription and MetaKeywords properties on the Page object to set the corresponding meta tags programmatically. Updating these values programmatically previously required either <%= %> expressions in the page markup or dynamic insertion of literal controls into the page. You can now just set these properties programmatically on the Page object in any Control derived class on the page or the Page itself: Page.MetaKeywords = "ASP.NET,4.0,New Features"; Page.MetaDescription = "This article discusses the new features in ASP.NET 4.0"; Note, that there’s no corresponding ASP.NET tag for the HTML Meta element, so the only way to specify these values in markup and access them is via the @Page tag: <%@Page Language="C#"      CodeBehind="WebForm2.aspx.cs"     Inherits="Westwind.WebStore.WebForm2"      ClientIDMode="Static"                MetaDescription="Article that discusses what's                      new in ASP.NET 4.0"     MetaKeywords="ASP.NET,4.0,New Features" %> Nothing earth shattering but quite convenient. Visual Studio 2010 Enhancements for Web Development For Web development there are also a host of editor enhancements in Visual Studio 2010. Some of these are not Web specific but they are useful for Web developers in general. Text Editors Throughout Visual Studio 2010, the text editors have all been updated to a new core engine based on WPF which provides some interesting new features for various code editors including the nice ability to zoom in and out with Ctrl-MouseWheel to quickly change the size of text. There are many more API options to control the editor and although Visual Studio 2010 doesn’t yet use many of these features, we can look forward to enhancements in add-ins and future editor updates from the various language teams that take advantage of the visual richness that WPF provides to editing. On the negative side, I’ve noticed that occasionally the code editor and especially the HTML and JavaScript editors will lose the ability to use various navigation keys like arrows, back and delete keys, which requires closing and reopening the documents at times. This issue seems to be well documented so I suspect this will be addressed soon with a hotfix or within the first service pack. Overall though, the code editors work very well, especially given that they were re-written completely using WPF, which was one of my big worries when I first heard about the complete redesign of the editors. Multi-Targeting Visual Studio now targets all versions of the .NET framework from 2.0 forward. You can use Visual Studio 2010 to work on your ASP.NET 2, 3.0 and 3.5 applications which is a nice way to get your feet wet with the new development environment without having to make changes to existing applications. It’s nice to have one tool to work in for all the different versions. Multi-Monitor Support One cool feature of Visual Studio 2010 is the ability to drag windows out of the Visual Studio environment and out onto the desktop including onto another monitor easily. Since Web development often involves working with a host of designers at the same time - visual designer, HTML markup window, code behind and JavaScript editor - it’s really nice to be able to have a little more screen real estate to work on each of these editors. Microsoft made a welcome change in the environment. IntelliSense Snippets for HTML and JavaScript Editors The HTML and JavaScript editors now finally support IntelliSense scripts to create macro-based template expansions that have been in the core C# and Visual Basic code editors since Visual Studio 2005. Snippets allow you to create short XML-based template definitions that can act as static macros or real templates that can have replaceable values that can be embedded into the expanded text. The XML syntax for these snippets is straight forward and it’s pretty easy to create custom snippets manually. You can easily create snippets using XML and store them in your custom snippets folder (C:\Users\rstrahl\Documents\Visual Studio 2010\Code Snippets\Visual Web Developer\My HTML Snippets and My JScript Snippets), but it helps to use one of the third-party tools that exist to simplify the process for you. I use SnippetEditor, by Bill McCarthy, which makes short work of creating snippets interactively (http://snippeteditor.codeplex.com/). Note: You may have to manually add the Visual Studio 2010 User specific Snippet folders to this tool to see existing ones you’ve created. Code snippets are some of the biggest time savers and HTML editing more than anything deals with lots of repetitive tasks that lend themselves to text expansion. Visual Studio 2010 includes a slew of built-in snippets (that you can also customize!) and you can create your own very easily. If you haven’t done so already, I encourage you to spend a little time examining your coding patterns and find the repetitive code that you write and convert it into snippets. I’ve been using CodeRush for this for years, but now you can do much of the basic expansion natively for HTML and JavaScript snippets. jQuery Integration Is Now Native jQuery is a popular JavaScript library and recently Microsoft has recently stated that it will become the primary client-side scripting technology to drive higher level script functionality in various ASP.NET Web projects that Microsoft provides. In Visual Studio 2010, the default full project template includes jQuery as part of a new project including the support files that provide IntelliSense (-vsdoc files). IntelliSense support for jQuery is now also baked into Visual Studio 2010, so unlike Visual Studio 2008 which required a separate download, no further installs are required for a rich IntelliSense experience with jQuery. Summary ASP.NET 4.0 brings many useful improvements to the platform, but thankfully most of the changes are incremental changes that don’t compromise backwards compatibility and they allow developers to ease into the new features one feature at a time. None of the changes in ASP.NET 4.0 or Visual Studio 2010 are monumental or game changers. The bigger features are language and .NET Framework changes that are also optional. This ASP.NET and tools release feels more like fine tuning and getting some long-standing kinks worked out of the platform. It shows that the ASP.NET team is dedicated to paying attention to community feedback and responding with changes to the platform and development environment based on this feedback. If you haven’t gotten your feet wet with ASP.NET 4.0 and Visual Studio 2010, there’s no reason not to give it a shot now - the ASP.NET 4.0 platform is solid and Visual Studio 2010 works very well for a brand new release. Check it out. © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

    Read the article

< Previous Page | 56 57 58 59 60