Search Results

Search found 18363 results on 735 pages for 'external ip'.

Page 60/735 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• Maximal screen resolution for external monitor breaks desktop

  - by Robiston

  Whenever I'm plugging in my external monitor into my notebook and changing the screen resolution to the maximum state, the desktop will get broken in a way: A third of the whole desktop space is not visible at all. I can see the whole panel as well as the Unity side bar to the left, but the desktop space with all the windows in it is not completely visible. It's blanked out. In case of opening the Unity menu bar, I can type something in it. As soon as close the menu bar, the upper part stays visible and hangs: Any ideas about that issue?

  Read the article

• External hard drive failing, is backup recovery possible?

  - by backitup

  I have a Seagate Freeagent external hard drive. While I was backing it up on Windows XP my pc crashed and I received the horrifying "Delayed Write Error" when I rebooted citing "$MFT" and a few other files. I tried to unmount it, but to no avail. Now my pc just crashes when I try to access it via Windows. In Ubuntu I am able to view it through disk utility. SMART status is "DISK FAILURE IMMINENT". Fdisk doesn't work, and the SMART tests fail on "Reallocated Sector Count". Is there any way for me to rescue any of my data. I can still access the drive but as soon as I do that it crashes.

  Read the article

• Ubuntu 12.04 External HD Issues

  - by Anthie Georgiadi

  I am experiencing one more problem with my Ubuntu 12.04... I have an External HD (500GB) which is NTFS formatted. I connected this HD on my Ubuntu 12.04 and copied some files. When I connected the HD on a Windows 7 machine I could find the folders (the were visible) but I wasn't able to copy/cut/delete them. However when I opened the folders I could handle the material (mp3s) in them. Does anybody know how can I fix this? How can I fully access and modify folders copied from Ubuntu via a Windows machine? Thanks in advance!

  Read the article

• Running external commands improved a bit

  - by Tomas Mysik

  Hi all, today we would like to show you one small improvement related to running external commands (e.g. generating documentation, running framework commands etc.) which will be available in NetBeans 7.3. First, have a look at the screenshot: As you can see, the first line represents the command that is being executed. In case of any error, this command can be easily copy & pasted to the console for deeper investigation (and proper bug reports ;). Also please notice that the Output window now supports background colors. That's all for today, as always, please test it and report all the issues or enhancements you find in NetBeans Bugzilla (component php, subcomponent Code).

  Read the article

• Jquery mobile spinner not loading in external links

  - by Jorge Zuverza

  I'm developing an application in which I have internal and external links. i noticed that Jquery mobile does not load the spinner when an external link is clicked: Example <a href = "/products">Spinner is shown </a> <a href = "othersite.com" rel = "external">Spinner is NOT shown </a> I have tried : $('a[href][rel=external]').click(function(){ //doesnt work $.mobile.showPageLoadingMsg(); } and: $('a[href][rel=external]').click(function(){ // shows the spinner but it gets stuck forever $.mobile.showPageLoadingMsg(); $('#loadingDiv').div("refresh"); } can someone help me show the spinner when the rel = external links are clicked? thanks!

  Read the article

• Tile transitions - external vs internal

  - by omgnoseat

  I've been looking at a couple of games and noticed that the transitions between tiles are handled somewhat different. I was wondering which methods are to be used in different situations and why. I'm currently using internal edges in a top-down game, and it's working out so far. But I don't want to run into problems later on, and have to redo the whole tileset. I noticed that platforming games mostly use the internal edges, and top-down games mostly use external and hybrid transitions. I can see how these tiles are used to create "depth" in top-down games, where the player apears to be standing in front of a wall for example. But it seems unlikely that such a small feature decides the entire method for tile transitions. You could always alter the bounding box to create the same effect.

  Read the article

• Function keys on an external keyboard

  - by asymptotically

  So I bought a keyboard for my laptop. Unfortunately, it doesn't have the function key (though I know many people say it's useless). On my laptop, I control volume with the function key and F9-11. How can I get the same functionality on my external keyboard? The advanced keyboard settings don't have an option related to the function key. More specifically, it would be great if I could map it to my 'Menu' key which I'm never going to use. Or is there a way to get full functionality without it?

  Read the article

• outgoing DNS flood targeted to non-ISP hosts

  - by radudani

  Below is the specific traffic monitored at the network perimeter and originating from a user PC on Vista platform. My question is not about the effects of the flood, but about the nature of the source of it. Is this some known infection, or just an application went out of control? a standard NOD32 scan didn't find anything, as the user told me. Thank you for any hint. 14:40:10.115876 IP 192.168.7.42.4122 > 67.228.0.181.53: S 2742536765:2742536765(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.115943 IP 192.168.7.42.4124 > 67.228.181.207.53: S 3071079888:3071079888(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116015 IP 192.168.7.42.4126 > 67.228.0.181.53: S 3445199428:3445199428(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116086 IP 192.168.7.42.4128 > 67.228.181.207.53: S 2053198691:2053198691(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116154 IP 192.168.7.42.4130 > 67.228.0.181.53: S 2841660872:2841660872(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116222 IP 192.168.7.42.4132 > 67.228.181.207.53: S 3150822465:3150822465(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116290 IP 192.168.7.42.4134 > 67.228.0.181.53: S 1692515021:1692515021(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116358 IP 192.168.7.42.4136 > 67.228.181.207.53: S 3358275919:3358275919(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116430 IP 192.168.7.42.4138 > 67.228.0.181.53: S 930184999:930184999(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116498 IP 192.168.7.42.4140 > 67.228.181.207.53: S 1504984630:1504984630(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116566 IP 192.168.7.42.4142 > 67.228.0.181.53: S 546074424:546074424(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116634 IP 192.168.7.42.4144 > 67.228.181.207.53: S 4241828590:4241828590(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116702 IP 192.168.7.42.4146 > 67.228.0.181.53: S 668634627:668634627(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116769 IP 192.168.7.42.4148 > 67.228.181.207.53: S 3768119461:3768119461(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.117360 IP 192.168.7.42.4111 > 67.228.0.181.53: 12676 op8 Resp12*- [2128q][|domain] 14:40:10.117932 IP 192.168.7.42.4112 > 67.228.181.207.53: 44190 op7 NotAuth*|$ [29103q],[|domain] 14:40:10.118726 IP 192.168.7.42.4113 > 67.228.0.181.53: 49196 inv_q [b2&3=0xeea] [64081q] [28317a] [43054n] [23433au] Type63482 (Class 5889)? M-_^OS>M-JM-m^_M-i.[|domain] 14:40:10.119934 IP 192.168.7.42.4114 > 67.228.181.207.53: 48131 updateMA Resp12$ [43850q],[|domain] 14:40:10.121164 IP 192.168.7.42.4115 > 67.228.0.181.53: 46330 updateM% [b2&3=0x665b] [23691a] [998q] [32406n] [11452au][|domain] 14:40:10.121866 IP 192.168.7.42.4116 > 67.228.181.207.53: 34425 op7 YXRRSet* [39927q][|domain] 14:40:10.123107 IP 192.168.7.42.4117 > 67.228.0.181.53: 56536 notify+ [b2&3=0x27e6] [59761a] [23005q] [33341n] [29705au][|domain] 14:40:10.123961 IP 192.168.7.42.4118 > 67.228.181.207.53: 19323 stat% [b2&3=0x14bb] [32491a] [41925q] [2038n] [5857au][|domain] 14:40:10.132499 IP 192.168.7.42.4119 > 67.228.0.181.53: 50432 updateMA+ [b2&3=0x6bc2] [10733a] [9775q] [46984n] [15261au][|domain] 14:40:10.133394 IP 192.168.7.42.4120 > 67.228.181.207.53: 2171 notify Refused$ [26027q][|domain] 14:40:10.134421 IP 192.168.7.42.4121 > 67.228.0.181.53: 25802 updateM NXDomain*-$ [28641q][|domain] 14:40:10.135392 IP 192.168.7.42.4122 > 67.228.181.207.53: 2073 updateMA+ [b2&3=0x6d0b] [43177a] [54332q] [17736n] [43636au][|domain] 14:40:10.136638 IP 192.168.7.42.4123 > 67.228.0.181.53: 15346 updateD+% [b2&3=0x577a] [61686a] [19106q] [15824n] [37833au] Type28590 (Class 64856)? [|domain] 14:40:10.137265 IP 192.168.7.42.4124 > 67.228.181.207.53: 60761 update+ [b2&3=0x2b66] [43293a] [53922q] [23115n] [11349au][|domain] 14:40:10.148122 IP 192.168.7.42.4125 > 67.228.0.181.53: 3418 op3% [b2&3=0x1a92] [51107a] [60368q] [47777n] [56081au][|domain]

  Read the article

• Cannot Mount USB 3.0 Hard Disk ?!!

  - by Tenken

  Hi, I have a USB 3.0 external hard disk which I am unable to mount. The entry appears in the "lsusb" command, but I do not exactly understand how to mount it. This is the output for my lsusb command. "ASMedia Technology Inc." is the USB 3.0 device. I would appreciate some help in mounting and accessing the hard disk. This the relevant output of my "lsusb -v" : Bus 009 Device 002: ID 174c:5106 ASMedia Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x174c ASMedia Technology Inc. idProduct 0x5106 bcdDevice 0.01 iManufacturer 2 ASMedia iProduct 3 AS2105 iSerial 1 00000000000000000000 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.35-28-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:04:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0503 highspeed power enable connect Device Status: 0x0003 Self Powered Remote Wakeup Enabled This is the error given when I try to mount the hard drive: shinso@shinso-IdeaPad:~$ sudo mount /dev/sdb /mnt [sudo] password for shinso: mount: /dev/sdb: unknown device This the output of "dmesg|tail": [30062.774178] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [30535.800977] usb 9-4: USB disconnect, address 3 [30659.237342] Valid eCryptfs headers not found in file header region or xattr region [30659.237351] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31259.268310] Valid eCryptfs headers not found in file header region or xattr region [31259.268313] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31860.059058] Valid eCryptfs headers not found in file header region or xattr region [31860.059062] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [32465.220590] Valid eCryptfs headers not found in file header region or xattr region [32465.220593] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I am using Ubuntu 10.10 (64 bit). Any help is appreciated.

  Read the article

• Unable to PPTP through NAT on Cisco 881

  - by MasterRoot24

  I'm trying to connect to a PPTP server which is sat behind a Cisco 881 NAT router. The server is running Ubuntu Server 12.04 and is running Poptop pptpd as the PPTP daemon listening for connections. As discussed in my other question, I'm trying to setup a Cisco 881 router to replace my old Linksys WAG320N. This same server and WAN connection worked fine with the WAG320N with no special configuration, other than allowing 1723 in through the firewall. On the Cisco 881, I'm using the newer ip nat enable or NAT NVI to setup static routes in through the firewall for the services running behind the router. My reason being that I can't run another copy of my live DNS domains internally with local IP addresses in. For the purposes of this question, though, I have rebuilt the router with ip nat inside/outside style NAT'ing, but this issue is still apparent. HTTP/SMTP/IMAP etc. all work ok from both the WAN and LAN interfaces of the router. I'm only having issues with SIP (see other question) and PPTP. My issue is that the GRE doesn't appear to be passing through NAT correctly and one end of the connection is not receiving GRE traffic when it should be, so the server hangs up the connection. Here's an example of /var/log/syslog with debug enabled in /etc/pptpd.conf: Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: MGR: Launching /usr/sbin/pptpctrl to handle client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pppd options file = /etc/ppp/pptpd-options Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection started Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 1) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a START CTRL CONN RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 156 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 7) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Set parameters to 100000000 maxbps, 64 window size Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a OUT CALL RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Starting call (launching pppd, opening GRE) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pty_fd = 6 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: tty_fd = 7 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 32 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 11 21:06:30 <HOSTNAME> pppd[22627]: pppd 2.4.5 started by root, uid 0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Using interface ppp0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Connect: ppp0 <--> /dev/pts/3 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: GRE: Bad checksum from pppd. Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 15) Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Got a SET LINK INFO packet with standard ACCMs Dec 11 21:07:00 <HOSTNAME> pppd[22627]: LCP: timeout sending Config-Requests Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Connection terminated. Dec 11 21:07:00 <HOSTNAME> avahi-daemon[1042]: Withdrawing workstation service for ppp0. Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Modem hangup Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Exit. Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Reaping child PPP[22627] Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection finished Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Exiting now Dec 11 21:07:00 <HOSTNAME> pptpd[5803]: MGR: Reaped child 22626 As far as Cisco are concerned, all I need is ip nat source static tcp <SERVER LAN IP> 1723 interface FastEthernet4 1723 but of course this doesn't seem to the be helping the GRE traffic through as it should. Trying the connection to the LAN IP of the server from the same LAN as the server (behind the router), the PPTP connection works fine, so I'm confident that the server's config is ok. Furthermore, all I needed on my WAG320N was to open 1723 in the firewall. Here's my current router config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end UPDATE 16/12/2012: The only progress that I have been able to make on this issue is that I'm confident that the issue is caused by the GRE tunnels (which are required for the PPTP connection to complete) are being blocked. When attempting a connection, I can see in show ip nat nvi translations that both a TCP translation on 1723 is setup and also a GRE translation is setup also. I appear to be able to see GRE related packets on the LAN that the server is on, so I am lead to believe that the server is sending(?) GRE packets, however running Wireshark on a client PC when attempting a connection shows absolutely no GRE packets. Whilst there are no configuration directives in my config posted above (that I can pin point) which would specifically block them, it would appear that the GRE packets are not being allowed in/out of the router's firewall, even though a NAT translation entry is setup to the server's LAN address. Would anyone be able to provide me with some help to ensure that GRE packets are not blocked by the router's firewall, so that this can be ruled out as a possible issue please?

  Read the article

• Varnish gets in a restart loop and causes the system to lock up; how can I fix?

  - by chrism2671

  Here is an extract from the syslog. Mar 2 14:01:10 ip-10-226-34-17 varnishd[20204]: Child (20205) not responding to ping, killing it. Mar 2 14:01:16 ip-10-226-34-17 varnishd[20204]: Child (20205) not responding to ping, killing it. Mar 2 14:01:16 ip-10-226-34-17 varnishd[20204]: Child (20205) died signal=3 Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child cleanup complete Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: child (13224) Started Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child (13224) said Closed fds: 4 5 6 10 11 13 14 Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child (13224) said Child starts Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child (13224) said managed to mmap 536870912 bytes of 536870912 Mar 2 14:01:21 ip-10-226-34-17 varnishd[20204]: Child (13224) said Ready Mar 2 14:01:35 ip-10-226-34-17 varnishd[20204]: Child (13224) not responding to ping, killing it. Mar 2 14:02:10 ip-10-226-34-17 last message repeated 7 times Mar 2 14:03:15 ip-10-226-34-17 last message repeated 13 times Mar 2 14:03:20 ip-10-226-34-17 varnishd[20204]: Child (13224) not responding to ping, killing it. Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: Child (13224) not responding to ping, killing it. Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: Child (13224) not responding to ping, killing it. Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: Child (13224) died signal=3 Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: Child cleanup complete Mar 2 14:05:53 ip-10-226-34-17 varnishd[20204]: child (13288) Started I'm not expecting a solution here but any help just to decode what each line is doing would be very instructive. Many thanks!

  Read the article

• DSL Modem with Wireless Router

  - by David

  I have a D-Link WBR-1310 wireless router and a TP-Link TD-8616 DSL modem. My old DSL modem died recently and I got the TP-Link as a replacement. With my old DSL modem, I plugged it into the WAN port on my D-Link and I could reach the internet through wireless and through the network. However, when I plugged the new TP-Link into the WAN port, I was not able to get any internet connectivity (either on the network ports or through wireless). So I plugged my labtop directly into the TP-Link DSL modem and I was able to get internet connectivity. I'm trying to figure out why my labtop can see the internet connection, but not the D-Link router. I think that the problem is due to the IP networking. My D-Link was originally set to have IP address 192.168.1.1. According to the documentation for the TP-Link DSL modem, it uses 192.168.1.1 as its IP address. I do not believe that my old DSL modem had an IP address. I logged into my D-Link router and changed its IP address to 192.168.1.2 and restarted it. Unfortunately, I still could not see the internet from my wireless devices. I've read a few forum postings which implied that I needed to setup a "bridge" between the two networks. Does that sound correct? Why didn't my old DSL modem require a bridge? I read pg. 12-13 of my D-Link's manual and they suggest that I need to disable UPnP, DHCP, and then plug the DSL modem into one of the LAN ports on my router. I'm concerned about doing this since I don't think that the firewall will work if I plug my DSL modem into one of the LAN ports. I also have a home NAS on my network and I wouldn't want that to be available over the internet. Does anyone have any advice about how I can get my TPLink DSL modem to work with my D-Link router? Thanks!

  Read the article

• Multiple SSL Certificates Running on Mac OS X 10.6

  - by frodosghost.mp

  I have been running into walls with this for a while, so I posted at stackoverflow, and I was pointed over here... I am attempting to setup multiple IP addresses on Snow Leopard so that I can develop with SSL certificates. I am running XAMPP - I don't know if that is the problem, but I guess I would run into the same problems, considering the built in apache is turned off. So first up I looked into starting up the IPs on start up. I got up an running with a new StartupItem that runs correctly, because I can ping the ip address: ping 127.0.0.2 ping 127.0.0.1 And both of them work. So now I have IP addresses, which as you may know are not standard on OSx. I edited the /etc/hosts file to include the new sites too: 127.0.0.1 site1.local 127.0.0.2 site2.local I had already changed the httpd.conf to use the httpd-vhosts.conf - because I had a few sites running on the one IP address. I have edited the vhosts file so a site looks like this: <VirtualHost 127.0.0.1:80> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> <VirtualHost 127.0.0.1:443> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local SSLEngine On SSLCertificateFile "/Applications/XAMPP/etc/ssl-certs/myssl.crt" SSLCertificateKeyFile "/Applications/XAMPP/etc/ssl-certs/myssl.key" SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> In the above code, you can change the 1's to 2's and it is the setup for the second site. They do use the same certificate, which is why they are on different IP addresses. I also included the NameVirtualHost information at the top of the file: NameVirtualHost 127.0.0.1:80 NameVirtualHost 127.0.0.2:80 NameVirtualHost 127.0.0.1:443 NameVirtualHost 127.0.0.2:443 I can ping site1.local and site2.local. I can use telnet ( telnet site2.local 80 ) to get into both sites. But in Safari I can only get to the first site1.local - navigating to site2.local gives me either the localhost main page (which is included in the vhosts) or gives me a Access forbidden!. I am usure what to do, any suggestions would be awesome.

  Read the article

• Multiple SSL Certificates Running on Mac OS X 10.6

  I have been running into walls with this for a while, so I posted at stackoverflow, and I was pointed over here... I am attempting to setup multiple IP addresses on Snow Leopard so that I can develop with SSL certificates. I am running XAMPP - I don't know if that is the problem, but I guess I would run into the same problems, considering the built in apache is turned off. So first up I looked into starting up the IPs on start up. I got up an running with a new StartupItem that runs correctly, because I can ping the ip address: ping 127.0.0.2 ping 127.0.0.1 And both of them work. So now I have IP addresses, which as you may know are not standard on OSx. I edited the /etc/hosts file to include the new sites too: 127.0.0.1 site1.local 127.0.0.2 site2.local I had already changed the httpd.conf to use the httpd-vhosts.conf - because I had a few sites running on the one IP address. I have edited the vhosts file so a site looks like this: <VirtualHost 127.0.0.1:80> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> <VirtualHost 127.0.0.1:443> DocumentRoot "/Users/jim/Documents/Projects/site1/web" ServerName site1.local SSLEngine On SSLCertificateFile "/Applications/XAMPP/etc/ssl-certs/myssl.crt" SSLCertificateKeyFile "/Applications/XAMPP/etc/ssl-certs/myssl.key" SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/Users/jim/Documents/Projects/site1"> Order deny,allow Deny from All Allow from 127.0.0.1 AllowOverride All </Directory> </VirtualHost> In the above code, you can change the 1's to 2's and it is the setup for the second site. They do use the same certificate, which is why they are on different IP addresses. I also included the NameVirtualHost information at the top of the file: NameVirtualHost 127.0.0.1:80 NameVirtualHost 127.0.0.2:80 NameVirtualHost 127.0.0.1:443 NameVirtualHost 127.0.0.2:443 I can ping site1.local and site2.local. I can use telnet ( telnet site2.local 80 ) to get into both sites. But in Safari I can only get to the first site1.local - navigating to site2.local gives me either the localhost main page (which is included in the vhosts) or gives me a Access forbidden!. I am usure what to do, any suggestions would be awesome.

  Read the article

• External Monitors shut off when Laptop Lid closes

  - by John Lanz

  I have researched the solution... gconftool-2 --type string --set /apps/gnome-power-manager/buttons/lid_ac "nothing" does not fix it. I have two external monitors and when I close my lid the settings are reset and the laptop's monitor is set to the default. Thanks! gsettings list-recursively org.gnome.settings-daemon.plugins.power org.gnome.settings-daemon.plugins.power active true org.gnome.settings-daemon.plugins.power button-hibernate 'nothing' org.gnome.settings-daemon.plugins.power button-power 'nothing' org.gnome.settings-daemon.plugins.power button-sleep 'nothing' org.gnome.settings-daemon.plugins.power button-suspend 'nothing' org.gnome.settings-daemon.plugins.power critical-battery-action 'suspend' org.gnome.settings-daemon.plugins.power idle-brightness 30 org.gnome.settings-daemon.plugins.power idle-dim-ac false org.gnome.settings-daemon.plugins.power idle-dim-battery true org.gnome.settings-daemon.plugins.power idle-dim-time 10 org.gnome.settings-daemon.plugins.power lid-close-ac-action 'nothing' org.gnome.settings-daemon.plugins.power lid-close-battery-action 'nothing' org.gnome.settings-daemon.plugins.power notify-perhaps-recall true org.gnome.settings-daemon.plugins.power percentage-action 2 org.gnome.settings-daemon.plugins.power percentage-critical 3 org.gnome.settings-daemon.plugins.power percentage-low 10 org.gnome.settings-daemon.plugins.power priority 1 org.gnome.settings-daemon.plugins.power sleep-display-ac 600 org.gnome.settings-daemon.plugins.power sleep-display-battery 600 org.gnome.settings-daemon.plugins.power sleep-inactive-ac false org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type 'suspend' org.gnome.settings-daemon.plugins.power sleep-inactive-battery true org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type 'suspend' org.gnome.settings-daemon.plugins.power time-action 120 org.gnome.settings-daemon.plugins.power time-critical 300 org.gnome.settings-daemon.plugins.power time-low 1200 org.gnome.settings-daemon.plugins.power use-time-for-policy true

  Read the article

• How to write PowerShell code part 1 (Using external xml configuration file)

  - by ybbest

  In this post, I will show you how to use external xml file with PowerShell. The advantage for doing so is that you can avoid other people to open up your PowerShell code to make the configuration changes; instead all they need to do is to change the xml file. I will refactor my site creation script as an example; you can download the script here and refactored code here. 1. As you can see below, I hard code all the variables in the script itself. $url = "http://ybbest" $WebsiteName = "Ybbest" $WebsiteDesc = "Ybbest test site" $Template = "STS#0" $PrimaryLogin = "contoso\administrator" $PrimaryDisplay = "administrator" $PrimaryEmail = "[email protected]" $MembersGroup = "$WebsiteName Members" $ViewersGroup = "$WebsiteName Viewers" 2. Next, I will show you how to manipulate xml file using PowerShell. You can use the get-content to grab the content of the file. [xml] $xmlconfigurations=get-content .\SiteCollection.xml 3. Then you can set it to variable (the variable has to be typed [xml] after that you can read the content of the xml content, PowerShell also give you nice IntelliSense by press the Tab key. [xml] $xmlconfigurations=get-content .\SiteCollection.xml $xmlconfigurations.SiteCollection $xmlconfigurations.SiteCollection.SiteName 4. After refactoring my code, I can set the variables using the xml file as below. #Set the parameters $siteInformation=$xmlinput.SiteCollection $url = $siteInformation.URL $siteName = $siteInformation.SiteName $siteDesc = $siteInformation.SiteDescription $Template = $siteInformation.SiteTemplate $PrimaryLogin = $siteInformation.PrimaryLogin $PrimaryDisplay = $siteInformation.PrimaryDisplayName $PrimaryEmail = $siteInformation.PrimaryLoginEmail $MembersGroup = "$WebsiteName Members" $ViewersGroup = "$WebsiteName Viewers"

  Read the article

• How to write PowerShell code part 1 (Using external xml configuration file)

  - by ybbest

  In this post, I will show you how to use external xml file with PowerShell. The advantage for doing so is that you can avoid other people to open up your PowerShell code to make the configuration changes; instead all they need to do is to change the xml file. I will refactor my site creation script as an example; you can download the script here and refactored code here. 1. As you can see below, I hard code all the variables in the script itself. $url = "http://ybbest" $WebsiteName = "Ybbest" $WebsiteDesc = "Ybbest test site" $Template = "STS#0" $PrimaryLogin = "contoso\administrator" $PrimaryDisplay = "administrator" $PrimaryEmail = "[email protected]" $MembersGroup = "$WebsiteName Members" $ViewersGroup = "$WebsiteName Viewers" 2. Next, I will show you how to manipulate xml file using PowerShell. You can use the get-content to grab the content of the file. [xml] $xmlconfigurations=get-content .\SiteCollection.xml 3. Then you can set it to variable (the variable has to be typed [xml] after that you can read the content of the xml content, PowerShell also give you nice IntelliSense by press the Tab key. [xml] $xmlconfigurations=get-content .\SiteCollection.xml $xmlconfigurations.SiteCollection $xmlconfigurations.SiteCollection.SiteName 4. After refactoring my code, I can set the variables using the xml file as below. #Set the parameters $siteInformation=$xmlinput.SiteCollection $url = $siteInformation.URL $siteName = $siteInformation.SiteName $siteDesc = $siteInformation.SiteDescription $Template = $siteInformation.SiteTemplate $PrimaryLogin = $siteInformation.PrimaryLogin $PrimaryDisplay = $siteInformation.PrimaryDisplayName $PrimaryEmail = $siteInformation.PrimaryLoginEmail $MembersGroup = "$WebsiteName Members" $ViewersGroup = "$WebsiteName Viewers"

  Read the article

• resolv.conf doesn't get set on reboot when networking is configured for static ip

  - by kenneth koontz

  I'm experiencing, what appears to be a hostname resolution issue in ubuntu 12.04 server edition when configuring my computer to use a static ip. In /etc/network/interfaces: # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.28 netmask 255.255.255.0 gateway 192.168.1.1 Running $ sudo apt-get upgrade, results in a 'Failed to fetch...': . . . W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en_US Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) E: Some index files failed to download. They have been ignored, or old ones used instead. When I change my /etc/network/interfaces to: auto eth0 iface eth0 inet dhcp Everything works fine. Looking into /etc/resolv.conf provides some more hints...In cases where I was getting the resolving issue, resolve.conf was empty. No nameservers were specified. When I changed to dhcp from static and restarted networking. /etc/resolv.conf gets written to: 'nameserver 192.168.1.1'. Switching back from dhcp to static and restarting doesn't remove the nameserve entry. When I restart the system with static set, resolv.conf is empty. When I restart the system with dhcp set, resolv.conf has nameserver 192.168.1.1. So it appears that the issue is that resolve.conf is not getting written to correctly? Which package/code is responsible for writing to resolv.conf? Is there a particular package that I can take a look at open issues? UPDATE: istream posted a good article discussing changes to resolve.conf in 12.04. http://www.stgraber.org/2012/02/24/dns-in-ubuntu-12-04/

  Read the article

• Handling SEO for Infinite pages that cause external slow API calls

  - by Noam

  I have an 'infinite' amount of pages in my site which rely on an external API. Generating each page takes time (1 minute). Links in the site point to such pages, and when a users clicks them they are generated and he waits. Considering I cannot pre-create them all, I am trying to figure out the best SEO approach to handle these pages. Options: Create really simple pages for the web spiders and only real users will fetch the data and generate the page. A little bit 'afraid' google will see this as low quality content, which might also feel duplicated. Put them under a directory in my site (e.g. /non-generated/) and put a disallow in robots.txt. Problem here is I don't want users to have to deal with a different URL when wanting to share this page or make sense of it. Thought about maybe redirecting real users from this URL back to the regular hierarchy and that way 'fooling' google not to get to them. Again not sure he will like me for that. Letting him crawl these pages. Main problem is I can't control to rate of the API calls and also my site seems slower than it should from a spider's perspective (if he only crawled the generated pages, he'd think it's much faster). Which approach would you suggest?

  Read the article

• SteelSeries & JavaFX External Control via Tinkerforge

  - by Geertjan

  The first photo shows me controling a JavaFX chart by rotating a Tinkerforge device, while the other two are of me using code by Christian Pohl from Nordhorn, Germany, to show components from Gerrit Grunwald's SteelSeries library being externally controled by Tinkerforge devices: What these examples show is that you can have a robot (i.e., an external device), of some kind, that can produce output that can be visualized via JavaFX charts and SteelSeries components. For example, imagine a robot that moves around while collecting data on the current temperature throughout a building. That's possible because a temperature device is part of Tinkerforge, just like the rotating device and distance device shown in the photos above. The temperature data collected by the robot would be displayed in various ways on a computer via, for example, JavaFX charts and SteelSeries components. From there, reports could be produced and adjustments could be made to the robot while it continues moving around collecting temperature data. The fact that Tinkerforge has Wifi support makes a scenario such as described here completely possible to implement. And all of this can be programmed in Java, without very much work, since the Java bindings for Tinkerforge are simple to use, such as shown in yesterday's blog entry.

  Read the article

• External USB hard-drive changing drive letter

  - by Sydius

  I have a Seagate FreeAgent Go external USB hard drive that was mounted but mysteriously decided to reconnect itself: Sep 30 15:07:06 feinman kernel: [243901.551604] usb 1-1.2: USB disconnect, device number 3 Sep 30 15:07:06 feinman kernel: [243901.553828] sd 6:0:0:0: [sdb] Synchronizing SCSI cache Sep 30 15:07:06 feinman kernel: [243901.553893] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Sep 30 15:07:10 feinman kernel: [243905.336557] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd Sep 30 15:07:10 feinman kernel: [243905.431219] scsi7 : usb-storage 1-1.2:1.0 Sep 30 15:07:11 feinman kernel: [243906.427207] scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0148 PQ: 0 ANSI: 4 Sep 30 15:07:11 feinman kernel: [243906.428303] sd 7:0:0:0: Attached scsi generic sg1 type 0 Sep 30 15:07:11 feinman kernel: [243906.430317] sd 7:0:0:0: [sdc] 625142447 512-byte logical blocks: (320 GB/298 GiB) Sep 30 15:07:11 feinman kernel: [243906.430860] sd 7:0:0:0: [sdc] Write Protect is off Sep 30 15:07:11 feinman kernel: [243906.430865] sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00 Sep 30 15:07:11 feinman kernel: [243906.431386] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 30 15:07:11 feinman kernel: [243906.493674] sdc: sdc1 Sep 30 15:07:11 feinman kernel: [243906.496109] sd 7:0:0:0: [sdc] Attached SCSI disk It changed from sdb to sdc, causing a number of problems for me. What can I do to further track down the cause? I thought it might be a problem with it sleeping but when I cat /sys/class/scsi_disk/6\:0\:0\:0/allow_restart, I see that it's already 1.

  Read the article

• Unable to mount external hard drive - Damaged file system and MFT

  - by Khalifa Abbas Lame

  I get the following error when i try to mount my external hard drive. UNABLE TO MOUNT Error mounting /dev/sdc1 at /media/khalibloo/Khalibloo2: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdc1" "/media/khalibloo/Khalibloo2"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read of MFT, mft=6 count=1 br=-1: Input/output error Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sdc1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It doesn't mount on windows either: "I/O Device error" it's an ntfs hard drive with a single partition Of course, i tried chkdsk /f. it reported several file segments as unreadable, but didn't say whether it fixed them or not (apparently not). also tried with the /b flag. ntfsfix reported the volume as corrupt. TestDisk was able to fix a small error with the partition table by adding the "80" flag for the active (only) partition. TestDisk also confirmed that the boot sector was fine and it matched the backup. However, when attempting to repair the MFT, it couldn't read the MFT. It also couldn't list the files on the hard drive. It says file system may be damaged. Active@ also shows that MFT is missing or corrupt. So how do i fix the file system? or the MFT?

  Read the article

• Easter eggs as IP protection in software

  - by Simon

  I work in embedded software, and for some reason, management wants to hide an Easter egg as means of IP protection. They call it a watermark, and since our software interact with the video preview feed (the image displayed on a screen before you take a photo), they want me to implement a trigger which will react to some unusual video input (a video konami code like dark - bright - dark - bright - whatever). When this trigger fires, something strange happens (which is outside of the normal behavior of the software). The goal is to check whether our software is included in a device. Does it sound like a good idea? I have many argument against this move: What if the konami code is too sensitive and user triggers it? Does this kind of watermark have any legal value? What if this "feature" is discovered by the client? The performance penalty should be very small, since the soft run on small devices. I am the one developping this trigger. If things go wrong, what is my responsibility? What is your opinion about this method? I can't find a link, but I remember seeing an answer on this site suggesting that putting Easter eggs for protection purpose was a good idea. Has anyone tried it with good results?

  Read the article

• Run external application on markdown source in ikiwiki

  - by student

  Can I add a button to each wiki page in ikiwiki which launches an external application (on the client side) or script with the markdown code of the current page as input? Edit: I didn't realize that it might be complicated to do it on client side as Zenklys' answer suggested. So perhaps I should describe more concretely what I have in mind: I want to have two buttons: "Get LaTeX" and 2. "Get pdf". Clicking on "Get LaTeX should generate a LaTeX file and the browser should simply open or download that file. Analogously for the pdf. It would even be ok, to have a button "Generate LaTeX" instead, which generates the LaTeX code and changes after the generation to "Get LaTeX" which simply points to the LaTeX file. So it is not really necessary to do the generation of the files on client side. Would be ok, if this is done (on a temporary folder) on server side. For the LaTeX resp. pdf generation I want to use a custom wrapper script for pandoc, let's call it mymarkdown2latex resp. mymarkdown2pdf.

  Read the article

• How to make ip Address static (eth0)

  - by Jordan Angelucci

  I'm having a really hard time configuring ubuntu 13.04 to have a static ip address. I have tried multiple solutions but everytime I reboot (can't do the network reset command because ubuntu freezes) I end up with no connection. Here is what I get when i type ifconfig into the terminal: eth0 Link encap:Ethernet HWaddr 10:bf:48:bc:07:cb inet addr:192.168.0.8 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::12bf:48ff:febc:7cb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1763067 errors:0 dropped:0 overruns:0 frame:0 TX packets:1024326 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2284491220 (2.2 GB) TX bytes:136809317 (136.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1840 errors:0 dropped:0 overruns:0 frame:0 TX packets:1840 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:185688 (185.6 KB) TX bytes:185688 (185.6 KB) I have also tried this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.160 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 24.222.0.94 dns-nameservers 24.222.0.95 If anyone could help me it would be very much appreciated.

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >