Search Results

Search found 12887 results on 516 pages for 'hard boiled wonderland'.

Page 60/516 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

  - by Jaime

  Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

  Read the article

• Help installing fedora13 from DvD?

  - by user38008

  I have windows xp on my dell but I lost the drivers disk so I want to install linux Fedora 13 instead and wipe the windows xp. I burned the iso to a dvd and loaded up the live session user and used "Install to harddrive" but when I get to the partitioning window there is no harddrives to install to so I cant overwrite the windows drive (/C:).. Help?

  Read the article

• How can I recover XFS partitions from a formatted HD?

  - by giuprivite

  I deleted the partition table of my HD. I wanted to format another one, but by mistake, I formatted the wrong one. Then I also created some new partition on it. Now I would like, if possible, to recover my old data. The old configuration was this: A primary NTFS partition with Windows, and a secondary partition with four logical partitions: a swap and three XFS partitions (two for Ubuntu and OpenSuSE, and one with the home for both systems). This is the output I get when I run gpart in a terminal: ubuntu@ubuntu:~$ sudo gpart /dev/sdb Begin scan... Possible partition(Windows NT/W2K FS), size(39997mb), offset(0mb) Possible extended partition at offset(39997mb) Possible partition(Linux swap), size(8189mb), offset(39997mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(48187mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(89149mb) Possible partition(SGI XFS filesystem), size(175044mb), offset(130112mb) End scan. Checking partitions... Partition(OS/2 HPFS, NTFS, QNX or Advanced UNIX): primary Partition(Linux swap or Solaris/x86): logical Partition(Linux ext2 filesystem): logical Partition(Linux ext2 filesystem): orphaned logical Partition(Linux ext2 filesystem): orphaned logical Ok. Guessed primary partition table: Primary partition(1) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) size: 39997mb #s(81915360) s(63-81915422) chs: (0/1/1)-(1023/254/63)d (0/1/1)-(5098/254/51)r Primary partition(2) type: 015(0x0F)(Extended DOS, LBA) size: 265245mb #s(543221849) s(81915435-625137283) chs: (1023/254/63)-(1023/254/63)d (5099/0/1)-(38912/254/2)r Primary partition(3) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Primary partition(4) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Looking the first eight lines, it seems the data are still there... but I don't know how to recover them. I have a free second HD of about 500 GB (the formatted one is 320 GB) that I can use for the recovery process.

  Read the article

• SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

  - by V M

  After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

  Read the article

• What do the numbers on Western Digital drives mean?

  - by Evan Carroll

  There are numerous numbers on a Western Digital drive, MDL (presumably model, ex WD5000BEKT-00KA9T0) -- not sure what the 99KA9T0 is. WWN (ex 50014EE25AC8C945) DCM (ex HBNTJBBB) LBA (ex 976773168) R/N (ex 77174) Then there are three numbers on the back of the PCB on a sticker White Sticker Left: 2061-771714-002 AC White Sticker Right: XT BD34 T7KQ 8 0002270 White Sticker far-Right: 272 Then there is one number printed on the PCB, REV P1 2060-771714-002 Then there is one number (or three) on the spindle, 71206-T8Y-03 9X0X22MF 32H Does anyone know what these numbers mean?

  Read the article

• Moving Bootcamp partition to another drive

  - by Xster

  Hi, I don't know how sketch this is. I currently have Bootcamp with Windows 7 on my internal along with my Snow Leopard. I'm moving to a bigger harddrive. I'm reinstalling Snow Leopard but I would like to keep my Bootcamp. How do I migrate the data from one drive to another? Any suggestions? I'm not willing to spend money on this

  Read the article

• Windows 7 Image Restore with a smaller hard drive

  - by Vaccano

  I have a 500 GB drive that I have made a system image of. I would like to move that to a 250 GB drive (because it is a Solid State drive). I have made a Windows 7 Backup Image of my 500 GB drive. I am currently only using 163 GB of that drive. Can I just restore that to the target drive or will the restore be expecting a 500 GB drive? If it is expecting it I can shrink my partition to less that 250 and backup again. But I would rather not if that is not needed. Will the restore realize that it is not using all the space and just take what it needs?

  Read the article

• IE8 Refuses to run Javascript from Local Hard Drive

  - by Josh Stodola

  I have a problem that just started at work recently and the network manager is certain he did not change anything with the group policy. Anyways, here is a detailed description of the problem. My machine is Windows XP SP3, and I use IE8 to browse. We have McAffee anti-virus software that I am unable to configure. I use the following file to test... <!DOCTYPE html> <html> <head> <title>Javascript Test</title> </head> <body> <script type="text/javascript"> document.write("<h1>PASS</h1>"); </script> <noscript> <h1>FAIL</h1> </noscript> </body> </html> When I open this file from the C: drive, it fails every time. If I execute it anywhere else (local/remote web server or on a mapped network drive), it works just fine. When I am simply browsing the Internet, Javascript on web sites works just fine. It is only failing on files running from my C: drive. Additionally, I have had a couple other programmers in the department try this file on their C: drive, and it works fine for them. So I don't believe it is a group policy thing. I need to fix this because I do extensive testing from my C: drive, and I am accustomed to doing so. I don't want to get into the habit of moving files to a different drive just to test. Things I have tried: Enabled "Allow Active Content to Run Files on My Computer" in Options | Advanced | Security Enabled "Allow Active Scripting" in Options | Security | Custom Level Verified that "Script" was not checked as disabled in Developer Toolbar Added localhost to Trusted Sites in Options Disabled McAffee completely (momentarily, with help from network admin) Used an older DOCTYPE in my test HTML page Re-installed IE8 completely Ran regsvr32 on the JScript.dll Slammed keyboard I am sure that there is a setting somewhere that will fix this problem, possibly in the registry. I would not be surprised if it was related to the developer toolbar. At this point I do not know where else to look. Can anyone help me resolve this problem? EDIT: Regardless of the bounty, this issue is still ongoing.

  Read the article

• BIOS setting: AHCI or RAID (when using SSD + 2x HDD in RAID-0)

  - by nixdagibts

  Hello there, I want to add a new SSD and use it as system drive with Win7 x64 installed. As driver I chose newest Intel Rapid Storage driver (not MSAHCI). I know that I have to use AHCI as BIOS setting for optimal SSD read/write performance. But I'm also using 2 normal HDDs as separate RAID-0 SSD: Win7 HDD: RAID-0 HDD: RAID-0 If I set my BIOS on my ASUS P5W DH Deluxe to AHCI, my RAID-0 cant be recognized And If im using RAID as setting, maybe my SSD has not its top speed. But I'm not sure about that. In short: AHCI no RAID-0 RAID no optimal SSD performance (?) Now my question: Can I use RAID as BIOS setting and be sure, that theres no decrease in SSD performance? Google finds so many articles with similar topics and my head is just exploding. Two examples: - set AHCI and after installing OS switch to RAID as BIOS setting... what? - use a diskette and F6 while installing win7... really? O.o I thought those times are gone

  Read the article

• best data+partition recovery software

  - by Pennf0lio

  I accidentally formatted my Drive D that contained all my Backups and Documents. I separated my files to my Drive D hoping I will not harm my files. Since I use Acronis Recovery to Install a new OS with some pre-installed application to my HDD I didn't realize I also formated/erase my Drive D. Now my drive D is unpartitioned. I am really in really in deep trouble and would need some urgent help, Please recommend a Software that at least can restore my Old Drive that contained my files. I'm assuming most of you think this is a duplicate of some old questions here, But I'm not looking for data recovery, I need to recover the whole partition with the files. I used to use "Recuva" but It only recovers files not the whole folders with the files in it. Please advice. Thank You!

  Read the article

• Preparing a new physical system with VMWare

  - by Max

  I need to create a new installation of Windows, but at the same time I need this computer. So I decided to create a new physical disk from within VMWare, install windows/drivers/software and then just replace the HDD in the computer. I've bought a new HDD, split it into two partions and installed Windows 7 using the VMWare's ability to use phusical disks. I can see the windows files and directories that have been created on this partition, but when I'm replacing the HDD in the host machine it cannot boot from it. Why is that? Is it at all possible to create a bootable physical disk with VMWare or I should create a virtual disk and then use some HDD imaging tool to copy the HDD image to a physical disk? Maybe there's a better way of installing a new system and working on the computer at the same time?

  Read the article

• How to do a hexdump of first track of HDD?

  - by Daniel Gratz

  How would i do a hexdump in Ubuntu for the first track of a HDD? I am looking for a winhex-esque output if that makes sense. The first track has 63 sectors, each 512 bytes long. I tried dd if=/dev/sda bs=1 count=512 | hexdump -C but that only gave me what appears to be the MBR, or first sector of the HDD. I guess i am confused about what bs and count should be. Bs means how many bytes to display and count is how many multiples of bs? Thanks!

  Read the article

• Win7 x64 unresponsive for a minute or so. HD failing?

  - by Gaia

  On a fully updated Win7 x64, every so often the system stalls for a minute or so. This has been going on for a couple months now. By stalling I mean the mouse responds and I can move windows around, but any window, any program, that is open becomes whiteish when I select it AND any new programs will not open. It doesn't matter what kind of program it is. When the stall stops all clicks I made (open new programs for example) take effect. Nothing shows up consistently (as in every time this happens) in the event log. Today though I was able to find something, but it doesn't reveal much other than the "system was unresponsive". It's a 7009 for "A timeout was reached (30000 milliseconds) while waiting for the Windows Error Reporting Service service to connect." It doesn't matter if I have any USB devices plug-in or not. I've ran Microsoft Security Essentials and Malwarebytes. While the machine is unresponsive, I've noticed that Drive D (the other partition on the single internal HD in this laptop) is displayed like this in explorer. This never occurs with Drive C or any other drive on the machine. . SMART report for the physical drive: Read benchmark by HD Tune 5 Pro, probably the most telling piece of the puzzle. Isn't this alone enough to see there is a problem with the drive, regardless of whether the unresponsiveness is caused by such purported problem? Here is a short hardware report: Computer: LENOVO ThinkPad T520 CPU: Intel Core i5-2520M (Sandy Bridge-MB SV, J1) 2500 MHz (25.00x100.0) @ 797 MHz (8.00x99.7) Motherboard: LENOVO 423946U Chipset: Intel QM67 (Cougar Point) [B3] Memory: 8192 MBytes @ 664 MHz, 9.0-9-9-24 - 4096 MB PC10600 DDR3 SDRAM - Samsung M471B5273CH0-CH9 - 4096 MB PC10600 DDR3 SDRAM - Patriot Memory (PDP Systems) PSD34G13332S Graphics: Intel Sandy Bridge-MB GT2+ - Integrated Graphics Controller [D2/J1/Q0] [Lenovo] Intel HD Graphics 3000 (Sandy Bridge GT2+), 3937912 KB Drive: ST320LT007, 312.6 GB, Serial ATA 3Gb/s Sound: Intel Cougar Point PCH - High Definition Audio Controller [B2] Network: Intel 82579LM (Lewisville) Gigabit Ethernet Controller Network: Intel Centrino Advanced-N 6205 AGN 2x2 HMC OS: Microsoft Windows 7 Professional (x64) Build 7601 The drive less than 1 year old. Do I have a defective drive? Seagate Tools diag says there is nothing wrong with the drive... UPDATE: I noticed that the windows error reporting service entered the running state then the stopped state and the space between the two events was exactly 2 minutes. Which error it was trying to report I don't know. I check the "Reliability Monitor" and it shows no errors to be reported. I've disabled the windows error reporting service to see if the problem stops.

  Read the article

• How can I control disk numbering (enumeration) in Windows 7 Disk Management?

  - by tim11g

  A desktop system had two drives (Assigned C and D, which were enumerated in Disk Management as Disk 0 and Disk 1). A new SSD was added as the boot drive, after copying the C drive to the SSD. The SSD was connected to SATA 0 (master) port on the motherboard. The previous C Drive was moved to SATA 2 and is reformatted as a non-booting NTFS partition. The D drive remained on SATA 1. The system boots and everything seems fine. I was able to manually adjust the Drive Letters. However, the list in Disk Management is re-ordered. Disk 0 is the the previous Disk 2 (D Drive) on SATA 1, Disk 1 is the new Boot Drive (now C) on SATA 0, and Disk 2 is the former C Drive (now assigned E) on SATA 2. Does the Disk 0, 1, 2, designation mean anything? I would prefer to have them display in Disk Management as Drives C, D, and E from top to bottom. Is the Disk enumeration based on the SATA port or something else? (If it was based on SATA Port, they should be ordered C, D, E. Is there any way to re-order the Disk number assignments? What actually does determine the Disk number enumeration?

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  Hi, partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• Error- D:\ is not accessible. Access is denied

  - by Aaron

  All of the sudden the D drive gives me an error when I try to open it: D:\ is not accessible. Access is denied. I have files on the drive that I would like to recover, so I do not want to reformat the drive. It acts almost like the computer doesn't recognize the drive. I have a feeling it's something with security settings, I may have accidentally changed something on the drive. I'm running on a Acer Aspire laptop on Windows Vista, SP2. I beleive both the C and the D drive run off of the same disk drive. At least that's all the Device Manager shows. So correct me if I'm wrong, but that would make it a partitioned drive.

  Read the article

• Clicking or Knocking with Seagate HD

  - by Daniel A. White

  My laptop's main HD makes a clicking or knocking sound when Windows or the Bios tries to access it. I put it into a SATA dock and it sounds perfectly fine when spinning up, but after Windows tries to access it, it becomes a repetitive clicking or knocking sound. Does anyone know any tips that might help me access my data? I have most of it backed up, but I would still like to Ghost it before I send it off for repairs. I know my laptop is still under warranty.

  Read the article

• Decreasing Root Disk Size of an "EBS Boot" AMI on EC2

  - by darkAsPitch

  So I have followed Eric's wonderful article here: http://alestic.com/2009/12/ec2-ebs-boot-resize This was the code basically that helped me increase the default size of the AMI: ec2-run-sintances ami-ID -n 1 --key keypair.pem --block-device-mapping "/dev/sda1=:250" Running Ubuntu 11.10 I didn't even have to re-size the disk afterwards, it was immediately a 250GB drive. How do I go about decreasing the default size of the AMI??? I tried: ec2-run-sintances ami-ID -n 1 --key keypair.pem --block-device-mapping "/dev/sda1=:100" Obviously... but I was told: Client.InvalidBlockDeviceMapping: Volume of size 100GB is smaller than snapshot ####### <250

  Read the article

• Windows 7: hard link, symbolic link and junction

  - by Michael

  What's the difference between them? in examples..

  Read the article

• How can I recover XFS partitions from a formatted HD?

  - by giuprivite

  I deleted the partition table of my HD. I wanted to format another one, but by mistake, I formatted the wrong one. Then I also created some new partition on it. Now I would like, if possible, to recover my old data. The old configuration was this: A primary NTFS partition with Windows, and a secondary partition with four logical partitions: a swap and three XFS partitions (two for Ubuntu and OpenSuSE, and one with the home for both systems). This is the output I get when I run gpart in a terminal: ubuntu@ubuntu:~$ sudo gpart /dev/sdb Begin scan... Possible partition(Windows NT/W2K FS), size(39997mb), offset(0mb) Possible extended partition at offset(39997mb) Possible partition(Linux swap), size(8189mb), offset(39997mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(48187mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(89149mb) Possible partition(SGI XFS filesystem), size(175044mb), offset(130112mb) End scan. Checking partitions... Partition(OS/2 HPFS, NTFS, QNX or Advanced UNIX): primary Partition(Linux swap or Solaris/x86): logical Partition(Linux ext2 filesystem): logical Partition(Linux ext2 filesystem): orphaned logical Partition(Linux ext2 filesystem): orphaned logical Ok. Guessed primary partition table: Primary partition(1) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) size: 39997mb #s(81915360) s(63-81915422) chs: (0/1/1)-(1023/254/63)d (0/1/1)-(5098/254/51)r Primary partition(2) type: 015(0x0F)(Extended DOS, LBA) size: 265245mb #s(543221849) s(81915435-625137283) chs: (1023/254/63)-(1023/254/63)d (5099/0/1)-(38912/254/2)r Primary partition(3) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Primary partition(4) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Looking the first eight lines, it seems the data are still there... but I don't know how to recover them. I have a free second HD of about 500 GB (the formatted one is 320 GB) that I can use for the recovery process.

  Read the article

• Using a non-validated SED on a Dell R720

  - by a coder

  We were given a Dell R720 a couple years ago, and the machine currently has standard 300GB 3.5" SAS 15k drives. Our RAID controller is a Perc H710. We need to update our disks to FIPS 140-2 certified SED. According to Dell, they have only one tested/validated FIPS SED for this machine/controller, but it is a 7200rpm 3.5" unit. I'm showing that Dell offers a 600GB 15k FIPS SED in 3.5" configuration (Dell part number 342-0605), but they say they haven't validated or tested to know if it works. They informed us that we would not void our warranty in using this non-validated drive. How likely is it that our R720 with H710 controller will work with the non-validated drive? Are there significant differences in how drive manufacturers build SED that would prevent them from working consistently across different controllers?

  Read the article

• Linux WD30EZRX WD Green HDD & Blacx Duet 5G Usb

  - by Adam

  I have connected up an WD30EZRX WD Green HDD to a Thermaltake Blacx Duet 5G USB dock in Ubuntu 12.04. Every thing seems fine except when the HDD idles it seems to have error ls: reading directory .: Input/output error after a while and is only fixed by unmounting and remounting the drive as root. I have the following line in /etc/fstab UUID=AAF670E9F670B6E3 /media/3TB ntfs defaults,user,auto 0 0 I have noticed that it seems to go between /dev/sdc2 and /dev/sdd2 devices on remount. I did copy 1TB last night without issue in 1 sitting. But after x mins of idle it has remount issue. Any tips/suggestions on how to proceed would be appreciated. Spent most of the night googling and all its done is made me sad. Edit (tried as suggested): root@mediaserver:/media/3TB# sudo hdparm -B 255 -S 253 /dev/sdd2 /dev/sdd2: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error setting standby to 253 (vendor-specific) APM_level = not supported Seems as if that didn't help with this particular drive.

  Read the article

• is a mini PCIe SSD worth it?

  - by Narcolapser

  Question: Is getting a mini-PCIe worth investing in? Info: I have a an Acer Aspire 1 n270. It has this mini PCIe slot that is just sitting there empty. I would like to change this, and I would like to speed up my boot time. So I've been considering getting a mini-PCIe SSD. They are about the same price as faster same size drives of the 2.5" variation. The advantage of the mini-PCIe card is that I can have my HDD still. So I have good boot time, but still have the storage of my HDD. What I want to know is: will this allow me to spin down the HDD more often allowing me to save power? Will the OS (Ubuntu 10.04 LTS) see them as separate drives? Is there anything that the mini-PCIe slot could be better used for? Thanks. ~n

  Read the article

• Bluescreen Stop 0x00000027 RDR_FILE_SYSTEM after cloning system on new HDD

  - by Daniel

  A couple of months ago I got a new 500GB HDD for my no-name-brand Laptop PC and I cloned the complete Win 7 Pro 32bit system with clonezilla from the old 70GB drive to the new one. At first everything was great, the new driver was immediately updated. But since then I get on a more and more frequent level (used to be every 2-3 days, but now it's more like 2-3 times a day) a BSOD Stop error. From the eventlog in Windows I know that there are two different error codes sppoking aroung: 0x00000027 (0xbaad0073, 0x9954f80c, 0x9954f3f0, 0x8ecd7c82) RDR_FILE_SYSTEM 0x00000044 (0x85443230, 0x00000eae, 0x00000000, 0x00000000) MULTIPLE_IRP_COMPLETE_REQUESTS I checked for viruses and did a complete HDD check using the Windows tool and WesternDigital tool (which is the producer of the new HDD) without results. I also looked for driver updates but couldn't find any. The name of the HDD as shown in the device manager is: WDC WD5000BPVT-00HXZT1 ATA Device. I'm really a noob regarding those kind of problems, so if you have any idea what I can try without losing all my data, let me know. Also, if any additional information are required.

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >