Search Results

Search found 4866 results on 195 pages for 'ngu soon hui'.

Page 60/195 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• Simultaneous read/write to RAID array slows server to a crawl

  - by Jeff Leyser

  Fairly beefy NFS/SMB server (32GB RAM, 2 Xeon quad cores) with LSI MegaRAID 8888ELP controlling 12 drives configured into 3 different arrays. 5 2TB drives are grouped into a RAID 6 array. As expected, write performance to the array is slow. However, sustained, simultaneous read/write to the array (wether through NFS or done locally) seems to practically block any other access to anything else on the controller. For example, if I do: cp /home/joe/BigFile /home/joe/BigFileCopy where BigFile is 20G, then even a simple ls /home/jane will take many 10s of seconds to complete. In addition, an ls /backup will also take many tens of seconds, even though /backup is a different array on the same controller. As soon as the cp is done, everything is back to normal. cp /home/joe/BigFile /backup/BigFile does not exhibit this behavior. It's only when doing read/write to the same array.

  Read the article

• Computer Studdering When Transferring Over Network

  - by Nalandial

  This is a really weird problem that I've never even seen before. When I copy to or from my server share, my computer studders terribly and the data transfers very slowly at only around 12MB/s. By studdering I mean the mouse skips around and all my applications respond very slowly; as soon as I cancel the transfer it resolves immediately. I looked at Task Manager and the CPU is only at ~35% with plenty of RAM free. This only started semi-recently; before, I had no problems and the transfer speed maxed out the gigabit connection. I have two hard drives in my computer. When I try transferring files between drives it's fine, but when I copy from the share to either drive or to it from either drive, I get studdering. I'm running Windows 7 x64. Anyone have any idea what's going on? Any help would be much appreciated.

  Read the article

• Boot linux off hard drive and then switch to run from usb flash disk

  - by Jesse

  I have an older laptop that I want to use as a simple media server on my home network. I would like to avoid using the internal hard drive except for booting (BIOS does NOT support booting from USB). My thought was to mirror the hard drive (currently has current install of Arch Linux) onto the flash drive and then after booting switch over to run everything from the flash drive. I read the following article about using a RAM disk (HOW-TO: Boot OS into RAM for speed and silence) but ran into problem because the USB subsystem does not seem to be initialized soon enough (I create root and home paritions on the flash disk and modified fstab to pick those - didn't work). Any thoughts?

  Read the article

• List of registered domain names

  - by Eric Chang

  Where can I find a list of domain names that I can download in a text file? I looked around and I found many sites with lists of expired domain names or domain names that will expire soon, but that's not what I need, I need a list of CURRENTLY REGISTERED domain names. The closest I found was this site (hxxp://www.list-of-domains.org/), but what I'm looking for ideally is just a plain list of registered domains and not some web links split across many pages full with ads and no text file. I know it's possible, after all how do these sites get the list of domains that they use? Where can I find such a list?

  Read the article

• Laptop recommendation for home user

  - by Mehper C. Palavuzlar

  I'm going to buy a new laptop soon and I need Super Users' recommendations. The following criteria are crucial for me: Intel i series processor Min. 4 GB RAM Min. 500 GB HDD HDMI port Min. 3 USB ports Not a monster, but a good graphics card Multimedia card reader DVD-RW Double Layer No heating problems! What do you recommend me? I'm considering buying a Vaio but I'm not sure. TIA.

  Read the article

• Network architecture when using Rackspace's Cloud

  - by brianz

  I'm planning on launching a web application soon, and have decided on using Rackspace's Cloud offering with Debian. I'm not expecting that much traffic to start, but would rather get the architecture correct now even with the small VPSs. The thing I'm not quite sure about is how many VPSs I should get. At a minimum, I know I'll want three VPSs: Two Apache webservers One server for MySQL I'd also like: Nginx load balancer MySQL replication memcached I'm not sure where those last three processes should be running. Can the load balancer run on the same machine as the MySQL slave, or should they each run on their own machine? Does memcached run alongside the webservers or on different machines?

  Read the article

• Windows 7 "Not Responding"

  - by sizeight

  At my office we've got 2 Dell XPS M1530 laptops. Both have been running up to date installations of Windows 7 with NOD 32 Anti Virus for months now with no problems. Last week however both started freezing with "Not responding" issues every few minutes when browsing the web. It doesn't matter which browser, the latest versions of Firefox, Chrome and IE8 all do the same. After a few minutes the browser "wakes up again" but freezes again very soon. I suspect it's an OS update issue, a driver/OS conflict or something. Anybody got a solution for this?

  Read the article

• Linux terminal - frozen update of input but can execute commands?

  - by Torxed

  How do i restart a shell session from within SSH when it looks something like this: anton@ubuntu:~$ c: command not found anton@ubuntu:~$ lib anton@ubuntu:~$ this is working, but its messed up anton@ubuntu:~$ I can execute commands, but as i input them nothing shows on the console, but as soon as i press enter the command executes and the output comes (without line-endings, as shown above) exec bash bash --login clear nothing really works, restarting the SSH session however works. Temporary solution is to start a screen session and every time the interface freezes you simply do Ctrl+a-c to start a new session and close the old one..

  Read the article

• SAP PI 7.1 Runtime Workbench error: Domain ??? (domain.null)

  - by Techboy

  Within the Runtime Workbench screen of my SAP PI 7.1 system I have the error: Domain ??? (domain.null) Integration Server Integration Engines Non-Central Adapter Engines J2SE Adapter Tools The SLD CIM instance, class XI Domain shows: CreationClassName: SAP_XIDomain Name: domain.null Caption: Domain null With the associations: XI Contained Integration Repository XI Contained Integration Server XI Contained Integration Server If I do this: Move these associations to the correct SAP_XIDomain Delete the SAP_XIDomain 'Domain null' Restart the SLD Restart the SAP PI system it all appears okay (i.e. the 'Domain null') issue does not appear. The 'Domain null' issue re-appears as soon as I go into the SAP Runtime Workbench. Please can you tell me why it says domain.null and how to resolve it?

  Read the article

• PS/2 and USB Keyboard is not working !!

  - by Mr-Right

  hello, let me make is clear that it is a different question from other related questions already posted here. Here is the scenario,No OS is installed in Computer. I am trying to install windows xp professional but due to keyboard failure I can't make it. PS/2 keyboard is not working at all. USB keyboard is working only before POST,I can work in BIOS. As soon as it starts booting from CD disc,keyboard fails to respond. And I can't go ahead from this message Press any key to boot from CD......

  Read the article

• OpenVPN Bridge on pfsense: once LAN pings clients, connectivity breaks

  - by Lucas Kauffman

  So I'm using a pfsense openvpn to bridge my LAN segment so VPN users can access the servers. The problem I'm having now is that I can establish a connection, I can ping the LAN server from the VPN, but as soon as I ping the client from the LAN server, there is no connectivity anymore between both parties. So: connect from the VPN client to the LAN = works ping the LAN from the VPN client = works access server from the VPN (ssh, ftp,...) = works ping client from server = doesn't work ping LAN from the VPN client = doesn't work anymore My bridge has em1 and ovpns1 bridged. I noted with tcpdump that ICMP is reaching the bridge between LAN and the VPN segment. But it's not put onto the em1 interface for some reason. My pfsense is running on an ESXi host with th vSwitch port enabled in promiscious mode. Firewall rules allow in and outbound traffic regardless origin or destination.

  Read the article

• IIS7 301 permanent redirect from billarga.com.au to billarga.com

  - by Rick

  Using IIS7 GUI, I have placed a 301 permanent redirection from billarga.com.au to billarga.com and left the other behaviours unchecked (want relative redirect). As soon as I apply the redirect on the .com.au, the same redirect appears for the .com domain. Why? I don't understand why changing one will do the same to the other. Has it got something to do with both using the same bindings? Each domain uses two bindings, one with www and the other without. My aim is to condense all traffic and google listings to the one domain, but still be able to use the .com.au for appearance purposes in the url (for aussies). Any help with this is appreciated!

  Read the article

• idle proccesses and high memory bad? uwsgi/django

  - by JimJimThe3rd

  I have a VPS with 256MB of ram. I'm running nginx, uwsgi and postgresql on Ubuntu 12.04 for a soon to be Django site. About 200MB of ram are being used despite the website not being active, the uwsgi processes seem to just be idling. Is this bad? I once heard that having a bunch of free memory isn't necessarily a good metric because it is possible that the memory in use can easily be freed up. I mean, it is possible that the server is storing commonly used "stuff" in case it is accessed but is more than happy to dump it if the ram is needed. But I'm really not sure, hence me asking this question. If it is bad I could set some of the application loading options for uwsgi like "cheap" or "idle" mode. Screenshot of my htop

  Read the article

• Good scanner to buy as of January 2010

  - by AlexV

  I'm planning to buy a scanner soon and since I didn't purchased one in years I wanted to know which brand / models are the "best". The ability to scan negatives is a nice to have but not 100% required. If you are specifing a model in particular, plase note that it must work under 64-bit OS (I'm using Windows 7 Ulitmate 64-bit). I'm not looking for a all-in-one solution like scanner/fax/printer. I want to use this to scan "old" photos from the non-digital era :) And sometimes to scan magazines and books. I am located in Canada it would be nice if your suggestion is available here. I usually buy online at NCIX and DirectCanada if it can help you see what's available there. Edit: My search leaded me to 2 particular models. I hesitate between Canon CanoScan 8800F and Epson V600. Anyone have good/bad words on either of them?

  Read the article

• Thunderbird 3.0 - how to prevent new message indicator from clearing?

  - by Joe Casadonte

  I just installed Thunderbird 3.0 and there are a few things driving me batty. When new email is delivered it has a faint star to the left of the subject (this is different than the new star column thing). In the old days (i.e. last week) the new message indicator wouldn't go away until I read the message or left the folder and returned. Now, as soon as I do anything with any email message, all new message indicators are cleared. How can I go back to the old behavior? Thanks!

  Read the article

• Debian Testing install USB menu does not respond to keyboard

  - by neurolysis

  I'm trying to install Debian Testing onto my Acer Aspire One ZG5 using the testing versions of boot.img and debian-testing-i386-CD-1.iso. I previously installed (two days ago) the latest release of stable, and the boot.img/CD1 from that worked fine, and installed seamlessly. With testing though, the menu does not respond to the keyboard as soon as the menu appears to select Install/Graphical install/Help, etc. I have also tried to boot with an external (USB) keyboard, which again, works fine with the stable version of boot.img/CD1, but not testing. I did some searching and couldn't find anything that looked similar. Any ideas?

  Read the article

• Very Large number of connections in TIME_WAIT state; Server is slow, ipconntrac

  - by Sparsh Gupta

  I have a nginx server with load balancing and reverse proxy. Right now its behing another nginx but very soon I plan to make it front, where it will receive TCP connections from clients directly at a rate of 500req/second I am having some big troubles with the server. I have pasted my configurations here and I am kinda sure that the problem is with ipconntrac and similar things which are alient to me http://paste.org/pastebin/view/28543 root@load_balancer:/proc/sys/net/ipv4# netstat -an|awk '/tcp/ {print $6}'|sort|uniq -c 67 CLOSING 727 ESTABLISHED 173 FIN_WAIT1 183 FIN_WAIT2 19 LAST_ACK 5 LISTEN 447 SYN_RECV 1 SYN_SENT 27970 TIME_WAIT Its a ubuntu machine with mainly nginx (load balancer and reverse proxy) installed. It surely isnt great. Can you help me understand whats going on and how can I fix it. This is my live server and I am sure its in a bad shape right now. Any document or commands to fix this, or settings I should make to make this better and reduce time wait and fin_wait1/2 better would be awesome.

  Read the article

• Renting linux server just to make backups of my personnal data ?

  - by Matthieu

  Hi all, I would like to be able to backup ALL my computers data on a Linux server. For now, I have a home server, but soon I will be travelling, without home (so no home server). I was thinking of renting a dedicated linux webserver, but this is expensive, and I don't need a fast machine "web-oriented" with mysql server and all, I just need a full SSH access (full control, and then I install my programs). Does "backup servers" exist ? Am I doing it wrong (maybe that is not a good solution) ? Note : I run Mac OS, Windows and Linux, I backup through rsync, I want full control on my backup, not an automated "magic" backup like MobileMe or anything like that. Edit : I need around 500Gb storage

  Read the article

• Multiple monitors with MAC latop/PC: how to switch output?

  - by Dane Jung

  I have two monitors, a PC that uses both of them, and a MAC laptop. The dilemma in my mind is how to keep the two monitor state in the PC active, while still being able to switch one monitor to the laptop's output. Is this even possible? I figure as soon as output is switched, my PC will detect a monitor has been unplugged, and will switch to a one-monitor state. The ideal would be to have a switch that switches from the PC two monitor output state to one where one monitor is being used by the MAC. Thanks for any help, Dane

  Read the article

• Combo ports and SFP

  - by Tahir

  I have Netgear GSM7324s prosafe switch. Switch has 24x1G ports. 4 ports are labeled as combo ports while 2 are labeled as SFP ports. I connected 2 PCs (each having 1gig and 10Gig NICs), with the switch using 1 & 10 Gig cables. Whenever, I ping the PCs the pinging is not working. As soon as, I removed the 10G cables, the ping starts working. Can someone please explain that what's going on. Also it would be very helpful if you can tell me the concept of combo ports, SFP ports in easy words?

  Read the article

• Intel motherboard drops HDMI output after Windows boots

  - by Nick

  I have an Intel motherboard (DH67CL) that uses Intel HD 3000 video. It has two video output ports: HDMI and DVI. Both my monitors are DVI, so I have two cables: a DVI-DVI and an HDMI-DVI. If I plug a monitor into just one of these ports, things work fine. But if I plug monitors into each of the ports, the system startup screens show on both monitors, along with the "Starting Windows..." screen, but as soon as the system boots into Windows, the HDMI-connected monitor goes to sleep. When I use the Intel video control panel, the HDMI-connected monitor is not detected. How do I get a dual-monitor setup to work?

  Read the article

• UAC prompt won't allow non-administrator to access IIS 7 Manager.

  - by Triynko

  The IIS 7 Manager seems to throw up a UAC prompt requiring administrative elevation as soon as the shortcut is clicked. This makes it impossible for a non-admin to use it. When I first created the user account, I could open IIS 7 Manager, but could not connect. I temporarily made the user account an Admin, then opened IIS 7 Manager again. Now that I've removed user from Admin, every time I open IIS 7 Manager it throws up the UAC prompt, making it impossible to do anything with it as a non-Admin. Is this a bug? Is there a way to reset the settings for this user so that IIS 7 Manager is back in some kind of first-run state?

  Read the article

• Rsync like windows backup tool

  - by Halfgaar

  Hi, I need to backup some windows machines and have been unable to find the proper tool. What I need is a tool that does efficient copying of changed files to a windows network location, like Rsync does. In turn, the server will then back that up using rdiff-backup, a tool which does very clever incremental backups. Right now I'm using windows' 7 included backup feature, but I really don't get that. It's too much off-topic, but it doesn't suffice (seems buggy as well). I looked into Amanda, but as soon as it wanted to install MySQL, I aborted. I also tried Deltacopy, but unfortunately, I don't remember what the problem with that was... Any advice for an rsync like tool that just does daily syncs to a network location?

  Read the article

• SQL Server 2008 CPU usage goes to 100% - troubleshooting help needed?

  - by Ali

  I have a fairly powerful database server having SQL Server 2008 R2 installed. There is only one database on it which is being accessed from 2 servers (around 5/6 applications). The problem is as soon as applications start pointing to the database, system's CPU usage goes upto 100% with sqlserver itself using 95+%. I have checked profiler, there aren't any heavy queries running there. I have checked active connections, they are hardly 150. Still CPU usage is around 100% and applications are experiencing slow response/connection to database server are getting refused. Database grus, I really need some ideas here. Thanks.

  Read the article

• Outlook collapses IMAP folders by default

  - by Aron Rotteveel

  I recently switched my mail account from POP3 to IMAP and created server-side rules to help me manage my mail better. I use Outlook 2007 as a mail client. For some reason, it seems then ever since I switched to IMAP, all my folders are collapsed by default. Since my folder tree goes down 4 levels, this is pretty annoying. I don't know any better than Outlook remembering my folder preferences, but it seems to forget them as soon as I close the program now. Is there any cause for this, and more importantly, is there a known fix for this problem?

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >