Search Results

Search found 3942 results on 158 pages for 'no sound'.

Page 60/158 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• MacBook Pro Boot Camp SPDIF passthrough?

  - by Ryan Zink

  I'm using Windows 7 through Boot Camp on a unibody Macbook Pro and am having problems using the SPDIF output. I get the expected Dolby Digital or DTS in some movies, but in other movies and in games (Source engine, StarCraft 2) where the output is enabled to 5.1, the output invariably shows up as Dolby Pro Logic, which means (I think) that passthrough is not enabled. The boot camp drivers for the sound card don't have any sort of control panel, and the Windows settings for enabling DTS and Dolby seem to work when I test those outputs in the sound settings. Is there some other setting or utility I can use to enable SPDIF passthrough for all programs?

  Read the article

• Beeping Hard Disk - Seagate 250GB Momentus 5400.6

  - by Pez Cuckow

  I have been trying to repair a laptop that simply beeps instead of booting. After taking it apart I have now realised that it is the hard disk beeping. I know that may sound strange but I guarantee that is what it is! (Currently powered on it's own with a Sata Mains lead). The beeping is slightly faster than one per second there is a link to this recording. This recording was made resting the mic on the hard disk while it was sat on a table on it's own, there are no speakers anywhere near, the sound is coming from the hard disk. Does anyone know what this beep means? Is the hard drive just dead, or is it fixable and the data recoverable? Many thanks,

  Read the article

• Why do my speakers get distorted randomly on Windows 7?

  - by Daniel Fischer

  I have a studio monitor setup. I have 2 KRK 6's and a Focusrite Firewire Pro 24. Every few hours my speakers sound distorted and my solution has been go to sound levels Properties of Saffire Audio Device Advanced Default Format Toggle to 16 bit then back to 24bit. Why does it screw up every few hours? Sometimes one speaker doesn't output too and this same process resets it but that's more rare. Is this a OS issue or Focusrite Driver Issue?

  Read the article

• DTS to AC3 conversion for LG TV using mediatomb DLNA server

  - by prion crawler

  I want to convert a MKV video file containing DTS audio to a stream with AC3 audio. I want to pass this resulting stream to mediatomb's transcoding feature. Mediatomb will transfer the stream via DLNA to a LG TV, which does not support DTS audio. I have tried the VLC command below but the TV does not recognize the stream, and playing the destination stream on PC does not produce sound. vlc -vvv -I dummy INPUT.file --sout \ '#transcode{acodec=ac3,ab=256k,channels=2,threads=4} \ :std{mux=ts,access=file,dst=DEST.file}' The following ffmpeg command give a stream that plays on the TV with sound, but the ffmpeg process gets killed (with signal 15) within 10-15 seconds, and then the TV restarts the playback from the beginning. This goes on in loops. ffmpeg -i INPUT.file -acodec ac3 -ab 384k -vcodec copy \ -vbsf h264_mp4toannexb -f mpegts -y DEST.file I want to have a working DLNA server which transcodes DTS to AC3, any help is appreciated.

  Read the article

• Linking "Wave Volume" to "Main Speaker Volume"

  - by ZorbaTHut

  I've got a Logitech keyboard and a digital sound device. The Logitech keyboard has a little volume wheel that sets the Main Speaker Volume. The digital sound device ignores the Main Speaker Volume and only pays attention to Wave Volume. See the issue? I'm looking for a program that can link Wave Volume to Main Speaker Volume. The closest I've found is a little utility named VolumeTracker, but it eats an entire CPU core, which is a bit much for a program of this functionality. Alternatively, I'd take a way to make the standard Logitech drivers change Wave Volume instead of Main Speaker Volume.

  Read the article

• rdesktop for windows?

  - by Claudiu

  I'm looking for a good RDP client for Windows. The built-in one for WinXP doesn't do sound and puts black padding around the window for some reason. Something like rdesktop would be perfect. I've tried getting it to run on windows, but I've run into problems. Even though I had XminG running as an xserver, it said it couldn't connect to the local display. Eventually I installed x/cygwin and compiled rdesktop myself, and that ended up working, but the sound still didn't work. Is there any good rdesktop-like client for windows, or a stand-alone version that wouldn't require installing x/cygwin and compiling just to work?

  Read the article

• arecord not working in ubuntu 9.10

  - by Sunny Shah.

  arecord not working in ubuntu 9.10, but Sound Recorder of ubuntu is working.

  Read the article

• Does anyone know of a windows program that will make a HDD spin so I can physically identify it by s

  - by Matt

  Does anyone know of a windows program that will make a HDD spin so I can physically identify it by sound in a machine?

  Read the article

• Configure TV Capture card to not use external audio jack for TV audio output

  - by Adam D.

  I had this working with MythTV on Ubuntu 9.1. Then a power surge killed the motherboard. After replacing the motherboard, ram and cpu, the card does not produce any audio except through the output jack on the back of the card. I do not want to use a cable to go from the back of the card to the audio in on the built in sound card of the new mother board. FYI, the old motherboard did not have an on-board sound card. There was a separate audio card installed. There's some configuration that has to be done to have it work the same way again. I just have no idea where to start. This is regarding wintv hauppauge mythtv linux ubuntu 9.10 audio

  Read the article

• Do any Windows IM clients support Adium styles?

  - by daxelrod

  I know I can't actually get Adium on Windows. Are there any Windows IM clients that at least support Adium styles, specifically Contact List Styles and Message Styles? Pidgin is heart-breakingly close, but as far as I can tell, it's not there yet: Pidgin-WebKit would be perfect, except it doesn't seem to compile on Windows. adium2pidgin-themes converts Adium Xtras into Pidgin themes, but only supports sound, status, and emoticon theme types: -t TYPE, --type=TYPE type of theme, may be: auto, sound, status or emoticon, default: auto The Pidgin project is considering merging Pidgin-WebKit into Pidgin itself, but that sounds like a long way off: Most notably, we've been talking about merging the webkit integration branch into what will become 3.0.0. Eventually, this would allow the support of Adium's message styles, although it may not happen right away. So, are there any Windows IM clients that support Adium styles today?

  Read the article

• Why does my audio keep reverting to stereo?

  - by GraemeF

  I have an ASUS P7P55D LE motherboard with onboard sound and I am running Windows 7 64-bit, and I am using the SPDIF output from my motherboard to my receiver. On my receiver I can see which audio channels are in use (i.e. stereo or 5.1) In the audio interface properties I can test DTS Audio and Dolby Digital outputs and both work fine, but when I try to play a game with 5.1 sound (I've tried Left 4 Dead and Dragon Age Origins) it reverts to stereo. I was getting this behaviour with the default Microsoft drivers so I installed the latest from the ASUS website but there is no difference. I notice that in the Advanced tab the Default Format only allows me to choose from various 2 channel formats so maybe that is something to do with it? How can I get 5.1 output all of the time?

  Read the article

• MP3 player no longer syncs after installing Sixaxis drivers

  - by zildjohn01

  I recently installed third-party drivers for the (Sony) PS3 controller on my friend's PC (Windows XP). I found out a few days later that his MP3 player (also Sony) is no longer recognized by Windows. He gets the "connect device" sound, and about 250ms later, the "disconnect device" sound. I figured the controller driver took over the Walkman's device ID, so I went through the registry and C:\Windows\inf removing all references to Sony's VID (054C), but I haven't had any luck. What would you do in this situation?

  Read the article

• Microphones not working on Apple macbook Air 1,1 (Early 2008) under Linux

  - by jj_p

  I'm running Linux on an mba. I can't make the microphones (neither external nor internal) work. I test using alsamixer and arecord -d 5 test-mic.waw together with aplay test-mic.waw It seems there is a problem with kernel trying to decipher Apple (intentionally) corrupted 'bios', in particular the mic pins are wrongly assigned. As far as we are concerned here, is there any difference between using EFI and BIOS-compatibility mode? (see https://wiki.archlinux.org/index.php/MacBook where they claim to have everything working out of the box on mba1,1) A nice proposal would be to compile the latest Linux kernel and run hda-jack-retask to find the right configuration (in the case of Realtek codec, the missing things I'm supposed to check are either some vendor-specific COEF verbs, EAPD or GPIO setup.), and then come up with a kernel patch to address the issue. Since I'm not that familiar with this last part of the story, can anyone help me through this process? Some useful data: The output from alsa script run as root http://www.alsa-project.org/db/?f=adae8ebee1007043fe83414ac4972319e02255fa The command hda-jack-sense-test -a (with external mic in) Pin 0x14 (Internal Speaker): present = No Pin 0x15 (Green HP Out): present = Yes Pin 0x16 (Not connected): present = No Pin 0x17 (Not connected): present = No Pin 0x18 (Not connected): present = No Pin 0x19 (Not connected): present = No Pin 0x1a (Not connected): present = No Pin 0x1b (Not connected): present = No Pin 0x1c (Not connected): present = No Pin 0x1d (Not connected): present = No Pin 0x1e (Not connected): present = No Pin 0x1f (Not connected): present = No Most likely the chip is Realtek ALC885 (compare also ALC889A) http://guide-images.ifixit.net/igi/bBTSqaeK5JpQ1AWe.large , although at the moment alsa reads it as ALC889A Takashi Iwai's tutorial https://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio.txt Some people researched the original files from a running OS X installation on this same model (I think the relevant files are AppleHDA.kext/Contents/MacOS/AppleHDA AppleHDA.kext/Contents/PlugIns/AppleHDAHardwareConfigDriver.kext/Contents/Info.p????list AppleHDA.kext/Contents/Resources/layout12.xml.zlib AppleHDA.kext/Contents/Resources/Platforms.xml.zlib) http://www.insanelymac.com/forum/topic/220090-alc889a-pin-configuration/#entry1554954 Datasheet http://www.realtek.info/pdf/ALC885_1-1.pdf (from the same Realtek, one can also try to download Linux driver, but this is just taken from ALSA project, as stated in the readme file.) Compare with this Arch guy http://www.alsa-project.org/db/?f=3ca8243c0626844f0264a3faad0aa72018bc14f4 Here for the first time support to audio (except mics) for mba1,2 (which is morally the same as 1,1) is patched into the kernel http://www.alsa-project.org/pipermail/alsa-devel/2010-February/025511.html The same jack supposedly works both for HP and ext MIC, I think it's called TRRS, and it's the same as the one used e.g. for iphones This guy might have done a similar job, though to a more recent version and for sound globally, not just mics: http://blogs.aerys.in/jeanmarc-leroux/2013/09/15/fixing-2013-macbook-air-ubuntu-sound-issue/ (this is mirror to http://unix.stackexchange.com/questions/73044/microphones-not-working-on-apple-macbook-air-1-1-early-2008-under-linux )

  Read the article

• 802.11n Audio Interference

  - by colithium

  Symptoms My audio is riddled with pops/crackles/glitches. Sometimes I swear the glitches sound exactly like the facebook messenger sound (best comparison I can give). Cause Using DPC Latency Checker, it reports the latency to be an abysmal 17,500µs (0.0175s). The first thing I did was disable my 802.11n wireless adapter. This immediately dropped the latency to a nice 250µs. When I re-enabled the adapter, it jumped right back up. I'm 99% certain that this is the cause of my audio glitches. Solution What can I do about it besides using wired Ethernet or buying a whole new adapter? My adapter is a Dell Wireless 1505 Draft 802.11n WLAN Mini-Card. To be honest, I've had nothing but trouble with the 802.11n standard and am contemplating just going back to g.

  Read the article

• What percentage of computers today are *nix based?

  - by Lazer

  Do you know some source that has statistics/estimations about this? Any sound guesses?

  Read the article

• GeForce 8800GT not even giving basic output

  - by Sam

  My Dad bought a GeForce 8800GT graphics card quite a long time ago now. It has never worked in his PC. Print out from a dxdiag: System Information Time of this report: 4/13/2010, 19:52:40 Machine name: USER-PC Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.091208-0542) Language: English (Regional Setting: English) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: Default System BIOS Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.3GHz Memory: 2046MB RAM Page File: 1045MB used, 3296MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6001.18000 32bit Unicode DxDiag Notes Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. DirectX Debug Levels Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) Display Devices Card name: ATI Radeon HD 2400 PRO Manufacturer: ATI Technologies Inc. Chip type: ATI Radeon Graphics Processor (0x94C3) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_94C3&SUBSYS_00000000&REV_00 Display Memory: 1012 MB Dedicated Memory: 245 MB Shared Memory: 767 MB Current Mode: 1280 x 960 (32 bit) (75Hz) Monitor: Generic PnP Monitor Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll Driver Version: 7.14.0010.0523 (English) DDI Version: 10 Driver Attributes: Final Retail Driver Date/Size: 8/22/2007 02:43:14, 3021312 bytes That info is from the current card that is installed in it and has been installed since its purchase roughly 3-4 years ago. When I physically install the card I put it into a purple slot on the motherboard that the old card was in (if I go into the device manager and select properties on the current card it confirms that the slot is a "PCI Slot 16 (PCI bus 2, device 0, function 0)") and boot up the computer but get absolutely no output. The screen that we have registers that it is connected to something (by not displaying the screen it does when the cable is unplugged) but just remains blank, no output at all. I recently took the card to my University and one of my friends who is better with hardware issues than I am tried it in his system and it worked perfectly. No issues whatsoever. I do not have a spec list for his system but I could get one if you need it. If you need any more information on this issue I will be happy to supply you with it as I am starting to get very annoyed with this problem ^_^

  Read the article

• How to fix choppy video with VLC player?

  - by Brian Ojeda

  When playing most movies in VLC player, the video feed is choppy. Furthermore, the sound is near perfect. Another catch is, this video issue wasn't always an issue. I use to play movies with no problem with video or sound. I can not pin point what has changed between the it use to work fine and the time it started being choppy though. I have an ASUS G73JW-A1. This system should be more than enough to handle the demand of playing HD videos. Movies that are normally effected are HD videos. These video range from 4 to 9 gigs. In addition, the videos are in MKV, MP4 (or M4V), and AVCHD (or M2TS) formats. I get the same results when playing move directly off my hard drive or off an external. Finally, all the drivers have been recently checked and updated if needed.

  Read the article

• Music but no voices on headphones

  - by TheEmeritus

  I have a laptop with Windows 7 and I have headphones for a couple of months, and only recently they started to play only the music, while the voices are there, but just very faint. I tried to connect them to another computer (PC, windows XP) and they worked fine, which made me think the problem isn't with the headphones but with the laptop. I've searched online and found a few solutions, none of the seemed to work. Such as: plugging in and out my jack until you can hear better, checking the headphones on other computers. Other relevant info: The headphones come with a mic if I right click the sound icon - sound devices. Then I dont see any 'headphones', not even if I tell it to show disabled devices. All I see is a 'speakers' icon, yet it's there even if the headphones are disconnected, and is always active. So if anyone has any idea I'd appreciate it :) Thanks!

  Read the article

• Windows 7 does not recognize hdmi audio output

  - by user30038

  I recently upgraded to Windows 7 on a Dell 545 MT with audio/video output via nVidia 9800 GTX+ to a flat screen television. I have installed/uninstalled/reinstalled all the most recent drivers from nVidia & realtek, but the machine will not recognize the hdmi output as a sound device (as it did previously in Vista). I troubleshot the problem with Dell for over an hour and was then directed to their software specialists who want $130 to fix the issue! Can anyone offer some insights on this? I've searched nVidia and Windows 7 forums w/o success and would really like to get sound coming back through my tv speakers. Many Thanks.

  Read the article

• WinXP keyboard input repeat rate problem

  - by Victor Sorokin

  I have problem similar to http://superuser.com/questions/33981/problems-with-kvm-switch-and-keyboard-repeat-rate-on-windows-xp: When I press and hold some key it's repeated random number of times, after that repeat stops and I need to release key and press it again to make repeat continue. If there's simultaneous sound playback and repeat is stopped, sound's stuck while I hold key with unpleasant drumming as if there's some audio problem. This issue is reproducible in WinXP Safe Mode. On the same config under Linux there's no issue. My config: List item PS/2 Logitech Keyboard USB Mouse MB M3A/H-HDMI WinXP Pro English SP2 with added Russian layout (WinXP loads via GRUB2) Realtek audio drivers for AC97 Thanks for your suggestions J

  Read the article

• snow leopard: how can i monitor loading of specific extensions?

  - by ufk

  Hiya. I'm installing VoodooHDA extension in order for Intel 82801I (ICH9 Family) HD Audio 8086:293E sound card to operate. The sound card does not work but i have no idea how to debug the issue. How can I check if the module was loaded properly? how can i make sure that there where no conflicts? how can i make sure that there were no dependencies issues with another module? Using snow leopard 64 bit. thanks!

  Read the article

• CPU fan twitching phase leds blinking - computer won't boot

  - by SooX

  I have a big problem that I got today. Yesterday computer was "on" normally, I went to sleep without shutting it down. When I woke up, I heard a strange sound and was unable to bring it up from hibernate. I unplugged the PSU. When I plugged the PSU back in, the sound came back. When I opened the case, I saw the fan "twitching" like it is about to start and fan LEDs were blinking. Also, motherboard LEDs were blinking in the same pattern - the first green one has more of luminosity then others. When I cut down the power with 0/1 button on PSU, the fans continue to make sounds like the machine is trying to boot before the capacitors run out and the power dies. Does anyone have a clue what to do? I tried disassembling everything but that doesn't work. I will try with friend's PSU later today.

  Read the article

• Diagnose Slow Video Playback during Editing [closed]

  - by chadejah Hunter

  Possible Duplicate: I Want To Start Editing Videos But My Computer Moves Slowly I am using Windows 7 Home Premium on a PC with AMD 64bit Athlon Processor 2850e @ 1.80GHz, 2GB RAM, and a NVIDIA GeForce 6150SE nForce 430 graphics card I am using Pinnacle Studio 15 HD Ultimate. While editing videos the program moves normally but the playback is slow. When I press play the sound is normal but the picture is really slow and choppy. When the sound ends the picture continues to play and it speeds up. I updated the video card today, restarting the PC but get the same behaviour. Does anyone have any suggestions what I can do to get video working smoothly while editing?

  Read the article

• Clicking or Knocking with Seagate HD

  - by Daniel A. White

  My laptop's main HD makes a clicking or knocking sound when Windows or the Bios tries to access it. I put it into a SATA dock and it sounds perfectly fine when spinning up, but after Windows tries to access it, it becomes a repetitive clicking or knocking sound. Does anyone know any tips that might help me access my data? I have most of it backed up, but I would still like to Ghost it before I send it off for repairs. I know my laptop is still under warranty.

  Read the article

• Beeping Hard Disk - Seagate 250GB Momentus 5400.6

  - by Pez Cuckow

  I have been trying to repair a laptop that simply beeps instead of booting. After taking it apart I have now realised that it is the hard disk beeping. I know that sound strange but I guarantee that is what it is! (Currently powered on it's own with a Sata Mains lead). The beeping is slightly faster than one per second there is a link to a recording below: http://www.pezcuckow.com/files/BeepingHardDisk.m4a This recording was made resting the mic on the hard disk while it was sat on a table on it's own, there are no speakers anywhere near, the sound is coming from the hard disk. Does anyone know what this beep means? Is the hard drive just dead, or is it fixable and the data recoverable? Many thanks,

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >