Search Results

Search found 61490 results on 2460 pages for 'windows mobile 6'.

Page 60/2460 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

  • Keep Windows Installer from using largest drive for temporary files

    - by stefan.at.wpf
    By default Windows Installer uses the largest drive for temporary storage, no matter if that's needed (meaning there would also be enough space on the system drive). Taken from http://msdn.microsoft.com/en-us/library/aa371372%28VS.85%29.aspx: During an administrative installation the installer sets ROOTDRIVE to the first connected network drive it finds that can be written to. If it is not an administrative installation, or if the installer can find no network drives, the installer sets ROOTDRIVE to the local drive that can be written to having the most free space. Now my system drive is an SSD, my largest drive is a RAID, that spins down when it's not used. Remember the SSD as system drive? Everything is silent now! Until I install something and Windows Installer wakes up my RAID again just to put a small .tmp file on it... How can I prevent Windows Installer from using the largest drive as temporary storage? Can I maybe set some access rights to disallow the Windows Installer to write on my RAID drive? Any other ideas? Thank you!

    Read the article

  • Broken filesystem on Windows XP / 7 virtual machine

    - by Pekka
    I created a virtual machine with Windows XP as the guest system in Microsoft's Virtual PC that ships along with Windows 7. I then installed Virtualbox and began running the MS machine in it. It worked fine. Then, I accidentally started the machine in Microsoft's Virtual PC again. The screen stayed blank, so after a while, realizing my mistake, I closed the Machine. Since then, the VM won't start any more, claiming massive file system problems. Starting Windows in normal mode results in a SOMETHING_FILESYSTEM blue screen; I can start in protected mode and run a checkdisk. That will fix something on every run, but every time I restart, it will start again. I tried re-booting the VM with the Windows CD and doing a repair install. I didn't watch whether that worked out, but I'm caught in the reset / check disk / reset cycle again. Is there anything VM specific that can still be done? On a physical machine, I would say reformat. Is there any way to get hold of the data on the virtual machine through either Virtual PC or Virtualbox? It was an experimental machine, but I had started entering some data on it that would be nice to recover.

    Read the article

  • Windows Feature List blank, Updates fail, system readiness tool says files are corrupt

    - by Chris T
    I tried to install IIS and to my surprise the feature/components lists was blank =[. I tried the system update readiness tool and it creates the following log: ================================= Checking System Update Readiness. Binary Version 6.1.7100.4104 Package Version 5.0 2009-09-30 23:38 Checking Deployment Packages Checking Package Manifests and catalogs. (f) CBS MUM Corrupt 0x800F0900 servicing\packages\Package_1_for_KB973540~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1: (f) CBS Catalog Corrupt 0x800B0100 servicing\packages\Package_1_for_KB973540~31bf3856ad364e35~amd64~~6.1.1.0.cat (f) CBS MUM Corrupt 0x800F0900 servicing\packages\Package_for_KB973540_RTM~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1: (f) CBS Catalog Corrupt 0x800B0100 servicing\packages\Package_for_KB973540_RTM~31bf3856ad364e35~amd64~~6.1.1.0.cat (f) CBS MUM Corrupt 0x800F0900 servicing\packages\Package_for_KB973540~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1: (f) CBS Catalog Corrupt 0x800B0100 servicing\packages\Package_for_KB973540~31bf3856ad364e35~amd64~~6.1.1.0.cat Checking package watchlist. Checking component watchlist. Checking packages. Checking component store (f) CSI Catalog Corrupt 0x800B0003 winsxs\Catalogs\efdfd17ac9909b9d81e1455d9abf291319237877c23df8a67a3f5a1f2f9e034f.cat 5fbf0b9691b..6772f1b0a58_31bf3856ad364e35_6.1.7100.4127_c2160c1f90006ee6 (f) CSI Manifest All Zeros 0x00000000 WinSxS\Manifests\amd64_microsoft-windows-mediaplayer-wmpdxm_31bf3856ad364e35_6.1.7100.4127_none_35ba254677b2a294.manifest amd64_microsoft-windows-mediaplayer-wmpdxm_31bf3856ad364e35_6.1.7100.4127_none_35ba254677b2a294 (f) CSI Manifest All Zeros 0x00000000 WinSxS\Manifests\wow64_microsoft-windows-mediaplayer-wmpdxm_31bf3856ad364e35_6.1.7100.4127_none_400ecf98ac13648f.manifest wow64_microsoft-windows-mediaplayer-wmpdxm_31bf3856ad364e35_6.1.7100.4127_none_400ecf98ac13648f Summary: Seconds executed: 240 Found 9 errors CSI Manifest All Zeros Total Count: 2 CSI Catalog Corrupt Total Count: 1 CBS MUM Corrupt Total Count: 3 CBS Catalog Corrupt Total Count: 3 How can I fix this?

    Read the article

  • Microsoft Application Request Routing with Windows Authentication

    - by theplatz
    I'm running into a problem trying to get Windows Authentication working in an environment that uses Microsoft Application Request Routing and was hoping someone might be able to help. The problem I'm running into is that only some requests are authenticated, while others fail with 401 errors. I have followed the Special Case of Running IIS 7.0 in a Web Farm instructions found at http://blogs.msdn.com/b/webtopics/archive/2009/01/19/service-principal-name-spn-checklist-for-kerberos-authentication-with-iis-7-0.aspx to no avail. My current server setup looks like the following: ARR Two servers set up with IIS shared configuration using IIS 7.5 on Windows 2008 R2 Anonymous authentication turned on for the Default Web Site Web Farm Two servers running IIS 7.5 on Windows 2008 R2 Three web sites set up using port binding to differentiate between virtual hosts. Ports being used are 8000, 8001, and 8002 Application pools for Windows Authentication all use a common domain account SPN added to domain account for http/<virthalhost-name>:<port-number> and http/<virtualhost-name>.<fully-qualified-domain>:<port-number> The IIS logs show the following when authentication is working/failing. If I understand correctly, all requests should show DOMAIN\User_Name: 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/stylesheets/techweb.landing.css - 8002 DOMAIN\User_Name ARR-HOST-1-IP-ADDRESS 200 0 0 62 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-background-right.gif - 8002 - ARR-HOST-1-IP-ADDRESS 401 2 5 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-background-left.gif - 8002 DOMAIN\User_Name ARR-HOST-IP-ADDRESS 200 0 0 31 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-icon.png - 8002 - ARR-HOST-1-IP-ADDRESS 401 2 5 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-icon.png - 8002 - ARR-HOST-1-IP-ADDRESS 401 1 2148074248 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/application-icon.png - 8002 - ARR-HOST-1-IP-ADDRESS 401 1 2148074248 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-background-right.gif - 8002 - ARR-HOST-1-IP-ADDRESS 401 1 3221225581 15 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/building.gif - 8002 DOMAIN\User_Name ARR-HOST-2-IP-ADDRESS 200 0 0 218 Does anyone know what might cause this problem and how I can resolve it?

    Read the article

  • Windows memory logged on vs logged off

    - by Adi
    Let's say I power on my fresh installed Windows 7 x64 machine. After Windows boots up, there are a bunch of services being started in the background that start allocating memory. Then I enter my user/pass and Windows logs me in. Let's supose I don't do anythig else (I don't explicitely start any application) and I don't have any other app installed by me. So it's fresh install of my machine. My question is: how much memory is needed for all the UI & other stuff? Is it a good indicator to look into task manager and check all the processes started under my user name and sum up all the memory consumed by those processes to get the total amount of memory I am consuming just to stay logged on? Basically this is my question: how much memory is needed just to stay logged on? Now, if log off would all the memory be released back to the system so that the background services can benefit of? Also, I assume that there might be a different discussion for each Windows flavors (?)

    Read the article

  • Windows 7 fails to connect to the internet a few minutes after startup

    - by SageTheGreat
    Problem Earlier today, when I turned on my desktop computer, my internet connection works fine. Cryptocurrency miners connecting and hashing as usual and I can browse websites. But after a few minutes, my miner fails indicating that there is something wrong with my internet connection. Tried refreshing my browser and is stuck at "resolving host", and then presented me an error. After that, i can't browse sites anymore. But the weird thing is that the network icon in Windows 7 shows no signs of problems. Solutions Made Restarted my computer without doing anything: Problem persists. Tried using the network troubleshooter of windows: Reported no problems Stopped bonjour still no progress. Loaded windows using Last good config: still no progress. Restarted Modem: No change. Current Status I currently did a system restore to my system to a point before installing the latest update from Microsoft. Because earlier today, I installed some updates and after that, the problem started to appear. (After system restore, same problem.) Latest Programs installed before the problem MS Visual Studio 2013 (but internet still worked fine after the install). I hope someone could provide answers on this problem. It is my first time encountering this. EDIT: Additional Info OS: Windows 7 SP1 64-bit AV: Avast Free Antivirus Internet Connection Type: Ethernet It appears that my Laptop can't even connect to the machine thru Remote Desktop My laptop and phone on WiFi works fine and can connect to the internet. EDIT 2: Whenever I boot into Safe Mode, my Internet is fine.

    Read the article

  • Windows 8 keeps signing out

    - by bill weaver
    Ran into a strange problem with Windows 8 Pro. Last night i installed Windows 8 Pro as an upgrade on a Sony Vaio laptop that had Windows 7 Pro on it. The install seemed to go okay. Then once installed, live tiles seem to work, native/Metro apps will start okay, but pretty soon after going into an app or settings, the screen flashes a few times and we're back to the lock screen. Signing in appears to do a full login. I've tried this with a local account and with a live.com account. This is someone else's laptop, so we decided to let it breathe, in case the install was still settling in. Well, they say today it's doing the same thing. Open the music app, and within a minute it's back to signon/lock screen. However, they can go to the actual Desktop and run Zune to play music, and it seems happy. In the past, i've installed retail Windows 8 Pro clean on a homebrew system, as an upgrade on a Dell laptop with a zillion apps and drivers, neither with any problems. Also, i've had the consumer preview and release candidate installed as well, no problems. Any ideas on what's going on here?

    Read the article

  • Autologin 2 Windows users OR Login another user from the desktop

    - by fpdragon
    I'm using two windows users on my HTPC at the same time. One is just for watching videos and one for administration via remote. This setup is quite ideal for me since windows can handle multiple concurrent logins and the win "rdp concurrent hack" (Google). The problem is, I want both users to be logged in automatically when the pc was started. It shall be possible to watch tv and also the admin user shall be automatically logged in to start my scripts and other tasks, even if I haven't logged in via remote desktop manually. Later, when I want to admin my htpc I can just rdp connect the admin user without interrupting the video playback on the actual HTPC's screen and check my cleanup tasks, downloads, ... witch already executed for this admin user. But right now I found no solution to automatically login user A from a user B desktop and I also found no solution to autologin both users immediately at startup. As a workaround I have to fire up my other notebook machine and login one time with the remote user via rdp. From this time on the remote admin user is running concurrent with the main user in the background of the machine. The other workaround would be... after startup switch user from main user to admin user and then back again. But that also requires manual steps. I'm on a Windows 8 System right now but all infos for Win7 or XP would be also interesting. thanks a lot for all ideas. PS: just to prevent useless posts... don't tell me that only one user can be logged in to windows. ;)

    Read the article

  • How do I restore a Windows Server 2008 R2 bare metal backup to a Windows Server 2012 R2 Hyper-V instance?

    - by Michael J. Gray
    I have been trying to find a simple way to migrate a physical Windows Server 2008 R2 installation over to a virtual machine hosted on Windows Server 2012 R2 Datacenter Edition /w Hyper-V. I came across the bare metal backup feature on Windows Server 2008 R2 and assumed I would be able to easily back it up and simply restore it into a new virtual machine by booting the installation media and getting into the Windows recovery process. When I attempted this, Hyper-V got into a network based restore process, but I do not have a PXE server or anything like that and I would rather not set it up. I tried mounting the VHD produced in the bare metal backup, just to see if it would somehow work, but it of course did not and failed with an error related to an incorrect boot device. I checked the virtual machine's BIOS settings and everything looked fine. I did not expect this to work anyway, so I stopped working through this method any further. Is there a way to take my bare metal backup and restore it into a virtual machine without a PXE server or SCVMM? I am opening to using proprietary tools but since the last time I did this I used Norton Ghost, which is no longer supported, I figured I would try doing it with what is readily available.

    Read the article

  • Index a low-cost NAS on Windows 7

    - by JcMaco
    Has anyone found a way to index the files stored on a Networked Attached Storage on Windows 7 so that the files can be available in Windows Search and Libraries? I am referring to the cheap and available NAS like the Western Digital My Book series that use an embedded linux server. Similar question: http://windows7forums.com/windows-7-networking/6700-indexing-nas-drive-libraries.html EDIT Windows help proposes to make the files stored on the NAS available offline. This is obviously not a good solution if the NAS has more data than what the client can store. If the folder is on a network device that is not part of your homegroup, it can be included as long as the content of the folder is indexed. If the folder is already indexed on the device where it is stored, you should be able to include it directly in the library. If the network folder is not indexed, an easy way to index it is to make the folder available offline. This will create offline versions of the files in the folder, and add these files to the index on your computer. Once you make a folder available offline, you can include it in a library. When you make a network folder available offline, copies of all the files in that folder will be stored on your computer's hard disk. Take this into consideration if the network folder contains a large number of files.

    Read the article

  • Unable to load Windows after using EasyBCD to Reset bcd [duplicate]

    - by johnny
    This question already has an answer here: How can I repair the Windows 8 EFI Bootloader? 9 answers My windows installation was working perfectly fine until i clicked "Reset BCD" in EasyBCD in Windows 8. After clicking that EasyBCD told me to add Win 8 entry via Add Entry Menu so i did. After restart, win 8 would not start. Neither would recovery F11. Attempts i made to Restore : Ran boot-repair from ubuntu live cd several time. Used Win8 system recovery disc created via virtualbox with win 8 preview iso. Automated repair from Win8 system recovery disc Ran following commands from cmd started from Win8 system recovery disc bootrec /fixmbr Result : Success message bootrec /rebuildbcd Result : after hitting (Y) "The requested system device cannot be found" System refresh started from Win8 system recovery disc gives error that device is locked. System reset started from Win8 system recovery disc gives error that required partition or device is missing or not accessible. Used automated repair from EasyRE disc. It gave success message. Used Fix boot problem from Macrium reflect winPE repair disc. Copied Recovery partition to usb. Booting from usb gave this error Your PC needs to be repaired. Error Code : 0XC000000f Press Enter to try again Press F8 for Startup Settings F8 & Enter does nothing I cannot install WIn7 or Win 8, error it gives : "windows cannot be installed on this disk. The selected disk is of the GPT partition style."

    Read the article

  • i7 Windows 7 laptop or Macbook Pro 15" (For making 3D model and Animation)

    - by sppdhs
    Hi everyone, I'm thinking of buying a new laptop as my current one will be 5 years old next year and it currently gives me a blue screen everytime I run a heavy software to make 3D models and animation. Question is: Should I buy Macbook Pro or a Windows 7 laptop? I tried to research and some say that Windows would be better, especially because you can buy a very high spec laptop with cheaper price. While some other say Macbook Pro is the better choice as it can run bootcamp with windows 7 100% performance on every software even though it's a mac. Is this true? Which one is actually better? Btw, the software that I usually use is 3Ds Max, Maya, and ZBrush. To note as well, I have never used a Mac before. I've checked around some stores and budget wise, I'll need around AU$3000+ to buy a Macbook pro, and AU$2000+ to buy a windows laptop. Quite a big difference in price range. Thanks in advance for your help.

    Read the article

  • Windows XP Disappearing Folders

    - by XenoFoxx
    I am researching a problem for a friend, and unfortunatly do not have direct access to his computer. I've tried to gather as much information as possible and I have researched it on various websites. I've not found anyone having the same problem my friend is having. So here goes: He has a media server in his home running Microsoft Windows XP. It has 3 drives, 1 for the OS and 2 for mass storage. Not long ago he went to access one of the mass storage media drives and it was empty, except for a single folder. His first assumption was that his roommate had deleted everything on the drive (excluding the remaining folder). He then checked the properties of the drive and it was still saying that the hard drive was nearly full. I told him to check the recycling bin, thinking that whoever deleted them didn't clear them from recycling and that they were still taking up space on the drive. My friend said the recycling bin was empty. So we have a drive that the windows file management system says is empty (again except for the remaining folder), but the properties of the drive say it's mostly full. Now it gets weirder My friend tried to create a new folder on this drive and it auto-named itself "New Folder(1)" which means that it recognizes there is already a "New Folder" in that directory. He tried to rename it to a name that he KNEW was there previsouly, and windows wouldn't allow it because it was a duplicate folder name. SO now it seems the folders are there, but not displaying in Windows Explorer. Both of us have no idea why this is occuring, why the folders vanished, why the one remaining folder didn't vanish, or how to make them visable again. Anyone else ever experience this? I can get more details if needed.

    Read the article

  • Windows: disable remote access of local drive, even by domain admin

    - by Matt
    We have a network of Windows 7 PCs that are managed as part of a domain. What we want is for the domain admin to be unable to view the PC's local drive (C:) unless he is physically at the PC. In other words, no remote desktop and no ability to use UNC. In other words, the domain admin should not be allowed to put \\user_pc\c$ in Windows Explorer and see all the files on that computer, unless he is physically present at the PC itself. Edit: to clarify some of the questions/comments that have come up. Yes, I am an admin---but a complete Windows novice. And yes, for the sake of this and my similar questions, it is fair to assume that I am working for someone who is paranoid. I understand the arguments about this being a "social problem versus a technical problem", and "you should be able to trust your admins", etc. But this is the situation in which I find myself. I'm basically new to Windows system administration, but am tasked with creating an environment that is secure by the company owner's definition---and this definition is clearly very different from what most people expect. In short, I understand that this is an unusual request. But I'm hoping there is enough expertise in the ServerFault community to point me in the right direction.

    Read the article

  • Very slow context menu in Windows 8

    - by burzum
    I've installed Windows 8 Pro on a blank new SSD, the system is on c:\. I do not think this problem was existent when I started using Windows 8 but I think it started to happen after I've symlinked (mklink /D) a folder from another drive, a SATA drive, to c:\xampp\htdocs. When I right click a file or folder inside the symlinked folder it always takes at least ~5-10 seconds until the context menu comes up. This also happens sometimes, but not all the time for files and folder outside of the symlinked folder. Also when I delete folders the delete folder dialog seems to get locked and does not continue. When I delete a folder using rmdir from the command line it works fine and pretty fast. It appears to me like the file explorer in Windows 8 is pretty bad compared to any other Windows I've used before? Any idea how to get these problems solved? I've already removed a lot of context menu entries; the only ones left are the tortoise git context menus but I'm sure that's not the problem.

    Read the article

  • Get the Windows Scheduler's Location Or Code?

    - by Ram
    Today i got a task to find the scheduler that is running once in a month, actually I have to change its running time period to once a week. I have searched for it in the Windows scheduled tasks, but i didn't find it. It is sending a mail containing a link. Now i am not confused about this where else can i find it. As the place i know where the scheduler can be, has already been checked by me. Can someone suggest me where else can i search for this scheduler? As per the previous developer's comment "It is a normal Windows method of scheduling tasks" UPDATE Actually the task is running after a month periodically. As per my knowledge it could be a "Windows Task Schedule" or "Windows Service" created by the old developer. Now as the previous developer is not available and i do not have any documentation.. i need to change the time period from month to weakly. I have checked in the "Task Schedules" on the server and checked the services running ob the server and was unable to find the "Scheduler". now i have two questions: is there any other approach by using that i can schedule an automated email periodically. any idea to find this.

    Read the article

  • Introducing Oracle Retail Mobile Point-of-Service

    - by user801960
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle recently announced the introduction of Oracle Retail Mobile Point-of-Service, a mobile extension to the Oracle Retail Point-of-Service (POS) used by many retailers internationally. Oracle Retail Mobile POS offers wide ranging cost and efficiency benefits by allowing staff resource to be used more effectively whilst also reducing spend associated with fixed POS solutions. For retailers utilising Oracle Retail Stores Solutions, additional benefits can be realised. Oracle Retail Mobile POS works with these solutions to allow store personnel to check in-store inventory, access product information and specifications, and perform tasks such as the printing or emailing of receipts and the activation of gift cards.  As Oracle Retail Mobile POS is an extension of Oracle Retail Point-of-Service, retailers can benefit from seamless integration with existing systems, simple upgrade procedures and seamless delivery across the business. However, the solution’s scalable and flexible architecture also supports multiple mobile operators and systems, so retailers are not locked into particular vendors. As well as being popular with retailers, Mobile POS has also proved to be well liked by consumers as it facilitates improved customer service levels. Retail staff are able to spend more time with consumers on the shop floor, access requested inventory information, and perform tasks that would traditionally have needed to be completed at a fixed cash register. Additional information can be accessed on Oracle Retail Point-of-Service or read the press announcement Oracle Introduces Mobile Point-of-Service for Retailers. Normal 0 false false false EN-US X-NONE X-NONE

    Read the article

  • Oracle ADF Mobile Video Series: Overview

    - by Michelle Kimihira
    Many of you have asked for some information around Oracle ADF Mobile which announced availability on October 22nd. Today's video is a quick 3 minute overview of what ADFMobile brings to the mobile application developer community.  Next Wednesday's video will show our enthusiastic developers how to create an ADF Mobile application and deploying to a device.   Additional Information Product Information on OTN: ADF Mobile Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

    Read the article

  • Google I/O 2012 - Building Mobile App Engine Backends for Android, iOS and the Web

    Google I/O 2012 - Building Mobile App Engine Backends for Android, iOS and the Web Dan Holevoet, Christina Ilvento Mobile application development is growing at explosive rates and the best of those applications have a backend server. Find out how you can use App Engine's new feature to build powerful APIs to support mobile applications running on Android, iOS, and mobile browsers. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 1783 43 ratings Time: 48:38 More in Science & Technology

    Read the article

  • is it necessary to format windows XP OS to do partitioning for Ubuntu, and how do I do it properly to then install Ubuntu from disk

    - by Brother V
    is it necessary to format windows XP OS to do partitioning for Ubuntu, and how do I do it properly to then install Ubuntu 10.10 from disk, and would it work from 10.10 to get 12.04 updates? Thank you all; for being, for being soooo forth-giving and for all you ever will to be. I endeavor to support and be of such torch-carrying also, and Am honored by the beautious examples of the people in these forums.

    Read the article

  • Simplifying Human Capital Management with Mobile Applications

    - by HCM-Oracle
    By Aaron Green If you're starting to think 'mobility' is a recurring theme in your reading, you'd be right. For those who haven't started to build organisational capabilities to leverage it, it's fair to say you're late to the party. The good news: better late than never. Research firm eMarketer says the worldwide smartphone audience will total 1.75 billion this year, while communications technology and services provider Ericsson suggests smartphones will triple to 5.6 billion globally by 2019. It should be no surprise, smart phone adoption is reaching the farthest corners of the globe; the subsequent impact of enterprise applications enabled by these devices is driving business performance improvement and will continue to do so. Companies using advanced workforce analytics can add significantly to the bottom line, while impacting customer satisfaction, quality and productivity. It's a statement that makes most business leaders sit forward in their chairs. Achieving these three standards is like sipping The Golden Elixir for the business world. No-one would argue their importance. So what are 'advanced workforce analytics?' Simply, they're unprecedented access to workforce trends and performance markers. Many are made possible by a mobile world and the enterprise applications that come with it on smart devices. Some refer to it as 'the consumerisation of IT'. As this phenomenon has matured and become more widely appreciated it has impacted the spectrum of functional units within an enterprise differently, but powerfully. Whether it's sales, HR, marketing, IT, or operations, all have benefited from a more mobile approach. It has been the catalyst for improvement in, and management of, the employee experience. The net result of which is happier customers. The obvious benefits but the lesser realised impact Most people understand that mobility allows for greater efficiency and productivity, collaboration and flexibility, but how that translates into business outcomes within the various functional groups is lesser known. In actuality mobility has helped galvanise partnerships between cross-functional groups within the enterprise. Where in some quarters it was once feared mobility could fragment a workforce, its rallying cry of support is coming from what you might describe as an unlikely source - HR. As the bedrock of an enterprise, it is conceivable HR might contemplate the possible negative impact of a mobile workforce that no-longer sits in an office, at the same desks every day. After all, who would know what they were doing or saying? How would they collaborate? It's reasonable to see why HR might have a legitimate claim to try and retain as much 'perceived control' as possible. The reality however is mobility has emancipated human capital and its management. Mobility and enterprise applications are expediting decision making. Google calls it Zero Moment of Truth, or ZMOT. It enables smoother operation and can contribute to faster growth. From a collaborative perspective, with the growing use of enterprise social media, which in many cases is being driven by HR, workforce planning and the tangible impact of change is much easier to map. This in turn provides a platform from which individuals and teams can thrive. With more agility and ability to anticipate, staff satisfaction and retention is higher, and real time feedback constant. The management team can save time, energy and costs with more accurate data, which is then intelligently applied across the workforce to truly engage with staff, customers and partners. From a human capital management (HCM) perspective, mobility can help you close the loop on true talent management. It can enhance what managers can offer and what employees can provide in return. It can create nested relationships and powerful partnerships. IT and HR - partners and stewards of mobility One effect of enterprise mobility is an evolution in the nature of the relationship between HR and IT from one of service provision to partnership. The reason for the dynamic shift is largely due to the 'bring your own device' (BYOD) movement, which is transitioning to a 'bring your own application' (BYOA) scenario. As enterprise technology has in some ways reverse-engineered its solutions to help manage this situation, the partnership between IT (the functional owner) and HR (the strategic enabler) is deeply entrenched. And it has to be. The CIO and the HR leader are faced with compliance and regulatory issues and concerns around information security and personal privacy on a daily basis, complicated by global reach and varied domestic legislation. There are tens of thousands of new mobile apps entering the market each month and, unlike many consumer applications which get downloaded but are often never opened again after initial perusal, enterprise applications are being relied upon by functional groups, not least by HR to enhance people management. It requires a systematic approach across all applications in use within the enterprise in order to ensure they're used to best effect. No turning back, and no desire to With real time analytics on performance and the ability for immediate feedback, there is no turning back for managers. In my experience with Oracle, our customers' operational efficiency is at record levels. It's clear as a result of the combination of individual KPIs and organisational goals, CIOs have been able to give HR leaders the ability to build predictive models that feed into an enterprise organisations' evolving strategy. It also helps them ensure regulatory compliance much more easily. Once an arduous task, with mobile enabled automation and quality data, compliance is simpler. Their world has changed for the better. For the CIO, mobility also assists them to optimise performance. While it doesn't come without challenges, mobile-enabled applications and the native experience users have with them means employees don't need high-level technical expertise to train users. It reduces the training and engagement required from the IT team so they can focus on other things that deliver value to the bottom line; all the while lowering the cost of assets and related maintenance work by simplifying processes. Rewards of a mobile enterprise outweigh risks With mobile tools allowing us to increasingly integrate our personal and professional lives, terms like "office hours" are becoming irrelevant, so work/life balance is a cultural must. Enterprises are expected to offer tools that enable workers to access information from anywhere, at any time, from any device. Employees want simplicity and convenience but it doesn't stop at private enterprise. This is a societal shift. Governments, which traditionally have been known to be slower to adopt newer technology, are also offering support for local businesses to go mobile. Several state government websites have advice on how to create mobile apps and more. And as recently as last week the Victorian Minister for Technology Gordon Rich-Phillips unveiled his State government's ICT roadmap for the next two years, which details an increased use of the public cloud, as well as mobile communications, and improved access to online data-sets. Tech giants are investing significantly in solutions designed to simplify mobile deployment and enablement. The mobility trend is creating a wave of change in the industry and driving transformation in the enterprise. If you're not on that wave, the business risk continues to rise as your competitiveness drops. Aaron is the Vice President of HCM Strategy at Oracle Corporation where he is responsible for researching and identifying emerging trends in the practice of Human Resources and works to deliver industry-leading technology solutions. Other responsibilities include, ownership of Oracle's innovative HCM solutions across JAPAC and enabling organisations to transform and modernise their workforce tools. Follow him on Twitter @aaronjgreen

    Read the article

  • GDL Presents: Creative Sandbox | Mobile

    GDL Presents: Creative Sandbox | Mobile Tune in to hear about a cool, new application of the Mobile platform, Big Bold: Grolsch, from the core creative team at Beattie McGuinness Bungay in conversation with a Google Mobile expert. They'll talk about how they pushed the possibilities of the Mobile platform - and will inspire you to do the same. From: GoogleDevelopers Views: 0 0 ratings Time: 01:00:00 More in Science & Technology

    Read the article

  • What's the best way to move c:\users to d:\users under vista/W7

    - by Scott
    I just installed Windows 7 RC1 and want to move c:\users to d:\users. What's the best way to do this? Due to the fact that Windows 7 creates a reserved partition that is mounted as C: in the recovery console, I had to use the following commands robocopy /mir /xj D:\Users E:\Users mklink D:\Users D:\Users /j Both D's in the mklink command are correct. When the system reboots, the drive that was D in the recovery console becomes the C drive.

    Read the article

  • Multiple Instances Of The Same Computer Under Network

    - by Reafidy
    Can anyone tell me why we have multiple instances of the same computer (SALLY) under network in the open file dialog. Please see the image below. This is not an issue in itself, however I am wondering if it is related to some file corruption issues we have been having lately. All pc's are windows 7. Server is Windows Server 2008 R2. We are using folder redirection, roaming profiles and offline files.

    Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >