Search Results

Search found 1657 results on 67 pages for 'writes on'.

Page 60/67 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

  • Can you find a pattern to sync files knowing only dates and filenames?

    - by Robert MacLean
    Imagine if you will a operating system that had the following methods for files Create File: Creates (writes) a new file to disk. Calling this if a file exists causes a fault. Update File: Updates an existing file. Call this if a file doesn't exist causes a fault. Read File: Reads data from a file. Enumerate files: Gets all files in a folder. Files themselves in this operating system only have the following meta data: Created Time: The original date and time the file was created, by the Create File method. Modified Time: The date and time the file was last modified by the Update File method. If the file has never been modified, this will equal the Create Time. You have been given the task of writing an application which will sync the files between two directories (lets call them bill and ted) on a machine. However it is not that simple, the client has required that The application never faults (see methods above). That while the application is running the users can add and update files and those will be sync'd next time the application runs. Files can be added to either the ted or bill directories. File names cannot be altered. The application will perform one sync per time it is run. The application must be almost entirely in memory, in other words you cannot create a log of filenames and write that to disk and then check that the next time. The exception to point 6 is that you can store date and times between runs. Each date/time is associated with a key labeled A through J (so you have 10 to use) so you can compare keys between runs. There is no way to catch exceptions in the application. Answer will be accepted based on the following conditions: First answer to meet all requirements will be accepted. If there is no way to meet all requirements, the answer which ensures the smallest amount of missed changes per sync will be accepted. A bounty will be created (100 points) as soon as possible for the prize. The winner will be selected one day before the bounty ends. Please ask questions in the comments and I will gladly update and refine the question on those.

    Read the article

  • Servlet IOException when streaming a Byte Array

    - by MontyBongo
    I occasionally get an IOException from a Servlet I have that writes a byte array to the outputstream in order to provide a file download capability. This download servlet has a reasonable amount of traffic (100k hits a month) and this exception occurs rarely, around 1-2 times a month. I have tried recreating the exception by using the exact same Base64 String and no exception is raised and the Servlet behaves as designed. Is this IO Exception being caused by something outside my applications control? For example a network issue or the user resetting the connection? I have tried to google the cause of an IOException at this point in the stack but to no avail. The environment is running Tomcat 5.5 on CentOS 5.3 with an Apache HTTP Server acting as a proxy using proxy_ajp. ClientAbortException: java.io.IOException at org.apache.catalina.connector.OutputBuffer.realWriteBytes(OutputBufferjava:366) at org.apache.tomcat.util.buf.ByteChunk.append(ByteChunk.java:352) at org.apache.catalina.connector.OutputBuffer.writeBytes(OutputBuffer.java:392) at org.apache.catalina.connector.OutputBuffer.write(OutputBuffer.java:381) at org.apache.catalina.connector.CoyoteOutputStream.write(CoyoteOutputStream.java:89) at org.apache.catalina.connector.CoyoteOutputStream.write(CoyoteOutputStream.java:83) at com.myApp.Download.doPost(Download.java:34) at javax.servlet.http.HttpServlet.service(HttpServlet.java:710) at javax.servlet.http.HttpServlet.service(HttpServlet.java:803) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188) at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:691) at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:469) at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:403) at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301) at com.myApp.EntryServlet.service(EntryServlet.java:278) at javax.servlet.http.HttpServlet.service(HttpServlet.java:803) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188) at com.myApp.filters.RequestFilter.doFilter(RequestFilter.java:16) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151) at org.apache.coyote.ajp.AjpAprProcessor.process(AjpAprProcessor.java:444) at org.apache.coyote.ajp.AjpAprProtocol$AjpConnectionHandler.process(AjpAprProtocol.java:472) at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1286) at java.lang.Thread.run(Thread.java:636) Caused by: java.io.IOException at org.apache.coyote.ajp.AjpAprProcessor.flush(AjpAprProcessor.java:1200) at org.apache.coyote.ajp.AjpAprProcessor$SocketOutputBuffer.doWrite(AjpAprProcessor.java:1285) at org.apache.coyote.Response.doWrite(Response.java:560) at org.apache.catalina.connector.OutputBuffer.realWriteBytes(OutputBufferjava:361) And the code in the Download Servlet: @Override protected void doPost (HttpServletRequest request, HttpServletResponse response) throws ServletException, java.io.IOException { try { response.setContentType("application/pdf"); response.setHeader("Pragma", ""); response.setHeader("Cache-Control", ""); response.setHeader("Content-Disposition", "Inline; Filename=myPDFFile..pdf"); ServletOutputStream out = response.getOutputStream(); byte[] downloadBytes = Base64.decode((String)request.getAttribute("fileToDownloadBase64")); out.write(downloadBytes); } catch (Base64DecodingException e) { e.printStackTrace(); response.getOutputStream().print("An error occurred"); } }

    Read the article

  • Saxon XSLT-Transformation: How to change serialization of an empty tag from <x/> to <x></x>?

    - by Ben
    Hello folks! I do some XSLT-Transformation using Saxon HE 9.2 with the output later being unmarshalled by Castor 1.3.1. The whole thing runs with Java at the JDK 6. My XSLT-Transformation looks like this: <xsl:transform version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns="http://my/own/custom/namespace/for/the/target/document"> <xsl:output method="xml" encoding="UTF-8" indent="no" /> <xsl:template match="/"> <ns:item> <ns:property name="id"> <xsl:value-of select="/some/complicated/xpath" /> </ns:property> <!-- ... more ... --> </xsl:template> So the thing is: if the XPath-expression /some/complicated/xpath evaluates to an empty sequence, the Saxon serializer writes <ns:property/> instead of <ns:property></ns:property>. This, however, confuses the Castor unmarshaller, which is next in the pipeline and which unmarshals the output of the transformation to instances of XSD-generated Java-code. So my question is: How can I tell the Saxon-serializer to output empty tags not as standalone tags? Here is what I am proximately currently doing to execute the transformation: import net.sf.saxon.s9api.*; import javax.xml.transform.*; import javax.xml.transform.sax.SAXSource; // ... // read data XMLReader xmlReader = XMLReaderFactory.createXMLReader(); // ... there is some more setting up the xmlReader here ... InputStream xsltStream = new FileInputStream(xsltFile); InputStream inputStream = new FileInputStream(inputFile); Source xsltSource = new SAXSource(xmlReader, new InputSource(xsltStream)); Source inputSource = new SAXSource(xmlReader, new InputSource(inputStream)); XdmNode input = processor.newDocumentBuilder().build(inputSource); // initialize transformation configuration Processor processor = new Processor(false); XsltCompiler compiler = processor.newXsltCompiler(); compiler.setErrorListener(this); XsltExecutable executable = compiler.compile(xsltSource); Serializer serializer = new Serializer(); serializer.setOutputProperty(Serializer.Property.METHOD, "xml"); serializer.setOutputProperty(Serializer.Property.INDENT, "no"); serializer.setOutputStream(output); // execute transformation XsltTransformer transformer = executable.load(); transformer.setInitialContextNode(input); transformer.setErrorListener(this); transformer.setDestination(serializer); transformer.setSchemaValidationMode(ValidationMode.STRIP); transformer.transform(); I'd appreciate any hint pointing in the direction of a solution. :-) In case of any unclarity I'd be happy to give more details. Nightly greetings from Germany, Benjamin

    Read the article

  • A couple questions using fwrite/fread with data structures

    - by Nazgulled
    Hi, I'm using fwrite() and fread() for the first time to write some data structures to disk and I have a couple of questions about best practices and proper ways of doing things. What I'm writing to disk (so I can later read it back) is all user profiles inserted in a Graph structure. Each graph vertex is of the following type: typedef struct sUserProfile { char name[NAME_SZ]; char address[ADDRESS_SZ]; int socialNumber; char password[PASSWORD_SZ]; HashTable *mailbox; short msgCount; } UserProfile; And this is how I'm currently writing all the profiles to disk: void ioWriteNetworkState(SocialNetwork *social) { Vertex *currPtr = social->usersNetwork->vertices; UserProfile *user; FILE *fp = fopen("save/profiles.dat", "w"); if(!fp) { perror("fopen"); exit(EXIT_FAILURE); } fwrite(&(social->usersCount), sizeof(int), 1, fp); while(currPtr) { user = (UserProfile*)currPtr->value; fwrite(&(user->socialNumber), sizeof(int), 1, fp); fwrite(user->name, sizeof(char)*strlen(user->name), 1, fp); fwrite(user->address, sizeof(char)*strlen(user->address), 1, fp); fwrite(user->password, sizeof(char)*strlen(user->password), 1, fp); fwrite(&(user->msgCount), sizeof(short), 1, fp); break; currPtr = currPtr->next; } fclose(fp); } Notes: The first fwrite() you see will write the total user count in the graph so I know how much data I need to read back. The break is there for testing purposes. There's thousands of users and I'm still experimenting with the code. My questions: After reading this I decided to use fwrite() on each element instead of writing the whole structure. I also avoid writing the pointer to to the mailbox as I don't need to save that pointer. So, is this the way to go? Multiple fwrite()'s instead of a global one for the whole structure? Isn't that slower? How do I read back this content? I know I have to use fread() but I don't know the size of the strings, cause I used strlen() to write them. I could write the output of strlen() before writing the string, but is there any better way without extra writes?

    Read the article

  • C++: Implementing Named Pipes using the Win32 API

    - by Mike Pateras
    I'm trying to implement named pipes in C++, but either my reader isn't reading anything, or my writer isn't writing anything (or both). Here's my reader: int main() { HANDLE pipe = CreateFile(GetPipeName(), GENERIC_READ, 0, NULL, OPEN_EXISTING, FILE_FLAG_OVERLAPPED, NULL); char data[1024]; DWORD numRead = 1; while (numRead >= 0) { ReadFile(pipe, data, 1024, &numRead, NULL); if (numRead > 0) cout << data; } return 0; } LPCWSTR GetPipeName() { return L"\\\\.\\pipe\\LogPipe"; } And here's my writer: int main() { HANDLE pipe = CreateFile(GetPipeName(), GENERIC_WRITE, 0, NULL, OPEN_EXISTING, FILE_FLAG_OVERLAPPED, NULL); string message = "Hi"; WriteFile(pipe, message.c_str(), message.length() + 1, NULL, NULL); return 0; } LPCWSTR GetPipeName() { return L"\\\\.\\pipe\\LogPipe"; } Does that look right? numRead in the reader is always 0, for some reason, and it reads nothing but 1024 -54's (some weird I character). Solution: Reader (Server): while (true) { HANDLE pipe = CreateNamedPipe(GetPipeName(), PIPE_ACCESS_INBOUND | PIPE_ACCESS_OUTBOUND , PIPE_WAIT, 1, 1024, 1024, 120 * 1000, NULL); if (pipe == INVALID_HANDLE_VALUE) { cout << "Error: " << GetLastError(); } char data[1024]; DWORD numRead; ConnectNamedPipe(pipe, NULL); ReadFile(pipe, data, 1024, &numRead, NULL); if (numRead > 0) cout << data << endl; CloseHandle(pipe); } Writer (client): HANDLE pipe = CreateFile(GetPipeName(), GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); if (pipe == INVALID_HANDLE_VALUE) { cout << "Error: " << GetLastError(); } string message = "Hi"; cout << message.length(); DWORD numWritten; WriteFile(pipe, message.c_str(), message.length(), &numWritten, NULL); return 0; The server blocks until it gets a connected client, reads what the client writes, and then sets itself up for a new connection, ad infinitum. Thanks for the help, all!

    Read the article

  • How do I read Unicode characters from an MS Access 2007 database through Java?

    - by Peter
    In Java, I have written a program that reads a UTF8 text file. The text file contains a SQL query of the SELECT kind. The program then executes the query on the Microsoft Access 2007 database and writes all fields of the first row to a UTF8 text file. The problem I have is when a row is returned that contains unicode characters, such as "?". These characters show up as "?" in the text file. I know that the text files are read and written correctly, because a dummy UTF8 character ("?") is read from the text file containing the SQL query and written to the text file containing the resulting row. The UTF8 character looks correct when the written text file is opened in Notepad, so the reading and writing of the text files are not part of the problem. This is how I connect to the database and how I execute the SQL query: ---- START CODE Connection c = DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb, *.accdb)};DBQ=C:/database.accdb;Pwd=temp"); ResultSet r = c.createStatement().executeQuery(sql); ---- END CODE I have tried making a charSet property to the Connection but it makes no difference: ---- START CODE Properties p = new Properties(); p.put("charSet", "utf-8"); p.put("lc_ctype", "utf-8"); p.put("encoding", "utf-8"); Connection c = DriverManager.getConnection("...", p); ---- END CODE Tried with "utf8"/"UTF8"/"UTF-8", no difference. If I enter "UTF-16" I get the following exception: "java.lang.IllegalArgumentException: Illegal replacement". Been searching around for hours with no results and now turn my hope to you. Please help! I also accept workaround suggestions. =) What I want to be able to do is to make a Unicode query (for example one that searches for posts that contain the "?" character) and to have results with Unicode characters receieved and saved correctly. Thank you!

    Read the article

  • Running same powershell script multiple asynchronous times with separate runspace

    - by teqnomad
    Hi, I have a powershell script which is called by a batch script which is called by Trap Receiver (which also passes environment variables) (running on windows 2008). The traps are flushed out at times in sets of 2-4 trap events, and the batch script will echo the trap details for each message to a logfile, but the powershell script on the next line of the batch script will only appear to process the first trap message (the powershell script writes to the same logfile). My interpetation is that the defaultrunspace is common to all iterations of the script running and this is why the others appear to be ignored. I've tried adding "-sta" when I invoke the powershell script using "powershell.exe -command", but this didn't help. I've researched and found a method using C# but I don't know this language, and busy enough learning powershell, so hoping to find a more direct solution especially as interleaving a "wrapper" between batch and powershell will involve passing the environment variables. http://www.codeproject.com/KB/threads/AsyncPowerShell.aspx I've hunted through stackoverflow, and again the only question of similar vein was using C#. Any suggestions welcome. Some script background: The powershell script is actually a modification of a great script found at gregorystrike website - cant post the link as I'm limited to one link but its the one for Lefthand arrays. Lots of mods so it can do multiple targets from one .ini file, taking in the environment variables, and options to run portions of the script interactively with winform. But you can see the gist of the original script. The batch script is pretty basic. The keys things are I'm trying to filter out trap noise using the :~ operator, and I tried -sta option to see if this would compartmentalise the powershell script. set debug=off set CMD_LINE_ARGS="%*" set LHIPAddress="%2" set VARBIND8="%8" shift shift shift shift shift shift shift set CHASSIS="%9" echo %DATE% %TIME% "Trap Received: %LHIPAddress% %CHASSIS% %VARBIND8%" >> C:\Logs\trap_out.txt set ACTION="%VARBIND8:~39,18%" echo %DATE% %TIME% "Action substring is %ACTION%" 2>&1 >> C:\Logs\trap_out.txt if %ACTION%=="Remote Copy Volume" ( echo Prepostlefthand_env_v2.9 >> C:\Logs\trap_out.txt c:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe -sta -executionpolicy unrestricted -command " & 'C:\Scripts\prepostlefthand_env_v2.9.ps1' Backupsettings.ini ALL" 2>&1 >> C:\Logs\trap_out.txt ) ELSE ( echo %DATE% %TIME% Action substring is %ACTION% so exiting" 2>&1 >> C:\Logs\trap.out.txt ) exit

    Read the article

  • Advice for Architecture Design Logic for software application

    - by Prasad
    Hi, I have a framework of basic to complex set of objects/classes (C++) running into around 500. With some rules and regulations - all these objects can communicate with each other and hence can cover most of the common queries in the domain. My Dream: I want to provide these objects as icons/glyphs (as I learnt recently) on a workspace. All these objects can be dragged/dropped into the workspace. They have to communicate only through their methods(interface) and in addition to few iterative and conditional statements. All these objects are arranged finally to execute a protocol/workflow/dataflow/process. After drawing the flow, the user clicks the Execute/run button. All the user interaction should be multi-touch enabled. The best way to show my dream is : Jeff Han's Multitouch Video. consider Jeff is playing with my objects instead of the google maps. :-) it should be like playing a jigsaw puzzle. Objective: how can I achieve the following while working on this final product: a) the development should be flexible to enable provision for web services b) the development should enable easy web application development c) The development should enable client-server architecture - d) further it should also enable mouse based drag/drop desktop application like Adobe programs etc. I mean to say: I want to economize on investments. Now I list my efforts till now in design : a) Created an Editor (VB) where the user writes (manually) the object / class code b) On Run/Execute, the code is copied into a main() function and passed to interpreter. c) Catch the output and show it in the console. The interpreter can be separated to become a server and the Editor can become the client. This needs lot of standard client-server architecture work. But some how I am not comfortable in the tightness of this system. Without interpreter is there much faster and better embeddable solution to this? - other than writing a special compiler for these objects. Recently learned about AXIS-C++ can help me - looks like - a friend suggested. Is that the way to go ? Here are my questions: (pl. consider me a self taught programmer and NOT my domain) a) From the stage of C++ objects to multi-touch product, how can I make sure I will develop the parallel product/service models as well.? What should be architecture aspects I should consider ? b) What technologies are best suited for this? c) If I am thinking of moving to Cloud Computing, how difficult/ how redundant / how unnecessary my efforts will be ? d) How much time in months would it take to get the first beta ? I take the liberty to ask if any of the experts here are interested in this project, please email me: [email protected] Thank you for any help. Looking forward.

    Read the article

  • Is it possible to gzip and upload this string to Amazon S3 without ever being written to disk?

    - by BigJoe714
    I know this is probably possible using Streams, but I wasn't sure the correct syntax. I would like to pass a string to the Save method and have it gzip the string and upload it to Amazon S3 without ever being written to disk. The current method inefficiently reads/writes to disk in between. The S3 PutObjectRequest has a constructor with InputStream input as an option. import java.io.*; import java.util.zip.GZIPOutputStream; import com.amazonaws.auth.PropertiesCredentials; import com.amazonaws.services.s3.AmazonS3; import com.amazonaws.services.s3.AmazonS3Client; import com.amazonaws.services.s3.model.PutObjectRequest; public class FileStore { public static void Save(String data) throws IOException { File file = File.createTempFile("filemaster-", ".htm"); file.deleteOnExit(); Writer writer = new OutputStreamWriter(new FileOutputStream(file)); writer.write(data); writer.flush(); writer.close(); String zippedFilename = gzipFile(file.getAbsolutePath()); File zippedFile = new File(zippedFilename); zippedFile.deleteOnExit(); AmazonS3 s3 = new AmazonS3Client(new PropertiesCredentials( new FileInputStream("AwsCredentials.properties"))); String bucketName = "mybucket"; String key = "test/" + zippedFile.getName(); s3.putObject(new PutObjectRequest(bucketName, key, zippedFile)); } public static String gzipFile(String filename) throws IOException { try { // Create the GZIP output stream String outFilename = filename + ".gz"; GZIPOutputStream out = new GZIPOutputStream(new FileOutputStream(outFilename)); // Open the input file FileInputStream in = new FileInputStream(filename); // Transfer bytes from the input file to the GZIP output stream byte[] buf = new byte[1024]; int len; while ((len = in.read(buf)) > 0) { out.write(buf, 0, len); } in.close(); // Complete the GZIP file out.finish(); out.close(); return outFilename; } catch (IOException e) { throw e; } } }

    Read the article

  • Spring webflow 1.0 - Downloading a file

    - by Dave
    I am using spring webflow 1.0. I am uploading a csv file, parsing it, and displying results before proceeding. The user has an option to download a csv file that contains the records that did not pass validation. When I click the link in a JSP to download this file, webflow invokes a form Action. The form action writes out a file via getting the output stream off the response: HttpServletResponse response = ((ServletExternalContext) context.getExternalContext()).getResponse(); I do not want to leave the jsp I'm currently on. I just want to download the file. In other words, I do not want to transition to another state. I just want to serve the dynamically rendered file. Everything works (I don't leave the page, and I download the file), but I'm getting the following error in my console: _pEncydKfggPHJo8=org.springframework.webflow.engine.NoMatchingTransitionException: No transition was matched on the event(s) signaled by the [1] action(s) that executed in this action state 'downloadErrorReportAction' of flow 'myFlow'; transitions must be defined to handle action result outcomes -- possible flow configuration error? Note: the eventIds signaled were: 'array<String>[[null]]', while the supported set of transitional criteria for this action state is 'array<TransitionCriteria>[[empty]]' at org.springframework.webflow.engine.ActionState.doEnter(ActionState.java:187) at org.springframework.webflow.engine.State.enter(State.java:191) at org.springframework.webflow.engine.Transition.execute(Transition.java:212) at org.springframework.webflow.engine.TransitionableState.onEvent(TransitionableState.java:107) at org.springframework.webflow.engine.Flow.onEvent(Flow.java:534) Truncated. see log file for complete stacktrace Here is the relevant portion of my webflow config. <view-state id="showUploadResults" view="UploadResults3.0"> <render-actions> <action bean="UploadResultsAction" method="transitionToWebflow"/> <action bean="UploadResultsAction" method="setupData"/> </render-actions> <transition on="submit" to="proceed"/> <transition on="downloadErrorReport" to="downloadErrorReportAction"/> </view-state> <action-state id="downloadErrorReportAction"> <action bean="UploadResultsAction" method="downloadErrorReport" name="downloadErrorReport"/> </action-state>

    Read the article

  • Can output from OutputDebugString be viewed in VisualStudio's output window

    - by wageoghe
    I am using C# and VS2010. When I use OutputDebugString to write debug information, should it show up in the output window? I can see the output from OutputDebugString in DebugView, but I thought I would see it in Visual Studio's Output window. I have looked under Tools-Options-Debugging-General and the output is NOT being redirected to the Immediate window. I have also looked under Tools-Options-Debugging-Output Window and all General Output Settings are set to "On". Finally, I have used the drop-down list in the Output window to specify that Debug messages should appear. If I change Tools-Options-Debugging-General to redirect the output to the Immediate window, the OutputDebugString messages do not appear in the immediate window. Here is my entire test program: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Runtime.InteropServices; using System.Diagnostics; namespace OutputDebugString { class Program { [DllImport("kernel32.dll", CharSet = CharSet.Auto)] public static extern void OutputDebugString(string message); static void Main(string[] args) { Console.WriteLine("Main - Enter - Console.WriteLine"); Debug.WriteLine("Main - Enter - Debug.WriteLine"); OutputDebugString("Main - Enter - OutputDebugString"); OutputDebugString("Main - Exit - OutputDebugString"); Debug.WriteLine("Main - Exit - Debug.WriteLine"); Console.WriteLine("Main - Exit - Console.WriteLine"); } } } If I run within the debugger, the Debug.WriteLine output does show up in the output window, but the OutputDebugString output does not. If I run from a console window, both Debug.WriteLine and OutputDebugString show up in DebugView. Why doesn't the OutputDebugString output ever show up in the output window? Ultimately, my intent is not to write a lot of debug output with OutputDebugString, rather I will use System.Diagnostics or NLog or something similar. I am just trying to find out, if I configure a logging platform to write to OutputDebugString, will the output be visible from within the debugger. Edit: I went back to my original program (not the simple test above) which uses TraceSources and TraceListeners configured via the app.config file. If I configure the trace sources to write to the System.Diagnostics.DefaultTraceListener (which is documented as writing to OutputDebugString), then the trace source output DOES go to the debug window. However, lines that write directly with OutputDebugString (such as in my simple example) DO NOT go to the debug window. Also, if I use a different TraceListener that writes to OutputDebugString (I got one from Ukadc.Diagnostics at codeplex), that output DOES NOT go to the debug window. Note that I have seen these questions but they did not provide a working solution: here and here

    Read the article

  • Dynamic data-entry value store

    - by simendsjo
    I'm creating a data-entry application where users are allowed to create the entry schema. My first version of this just created a single table per entry schema with each entry spanning a single or multiple columns (for complex types) with the appropriate data type. This allowed for "fast" querying (on small datasets as I didn't index all columns) and simple synchronization where the data-entry was distributed on several databases. I'm not quite happy with this solution though; the only positive thing is the simplicity... I can only store a fixed number of columns. I need to create indexes on all columns. I need to recreate the table on schema changes. Some of my key design criterias are: Very fast querying (Using a simple domain specific query language) Writes doesn't have to be fast Many concurrent users Schemas will change often Schemas might contain many thousand columns The data-entries might be distributed and needs syncronization. Preferable MySQL and SQLite - Databases like DB2 and Oracle is out of the question. Using .Net/Mono I've been thinking of a couple of possible designs, but none of them seems like a good choice. Solution 1: Union like table containing a Type column and one nullable column per type. This avoids joins, but will definitly use a lot of space. Solution 2: Key/value store. All values are stored as string and converted when needed. Also use a lot of space, and of course, I hate having to convert everything to string. Solution 3: Use an xml database or store values as xml. Without any experience I would think this is quite slow (at least for the relational model unless there is some very good xpath support). I also would like to avoid an xml database as other parts of the application fits better as a relational model, and being able to join the data is helpful. I cannot help to think that someone has solved (some of) this already, but I'm unable to find anything. Not quite sure what to search for either... I know market research is doing something like this for their questionnaires, but there are few open source implementations, and the ones I've found doesn't quite fit the bill. PSPP has much of the logic I'm thinking of; primitive column types, many columns, many rows, fast querying and merging. Too bad it doesn't work against a database.. And of course... I don't need 99% of the provided functionality, but a lot of stuff not included. I'm not sure this is the right place to ask such a design related question, but I hope someone here has some tips, know of any existing work, or can point me to a better place to ask such a question. Thanks in advance!

    Read the article

  • Are there programs that iteratively write new programs?

    - by chris
    For about a year I have been thinking about writing a program that writes programs. This would primarily be a playful exercise that might teach me some new concepts. My inspiration came from negentropy and the ability for order to emerge from chaos and new chaos to arise out of order in infinite succession. To be more specific, the program would start by writing a short random string. If the string compiles the programs will log it for later comparison. If the string does not compile the program will try to rewrite it until it does compile. As more strings (mini 'useless' programs) are logged they can be parsed for similarities and used to generate a grammar. This grammar can then be drawn on to write more strings that have a higher probability of compilation than purely random strings. This is obviously more than a little silly, but I thought it would be fun to try and grow a program like this. And as a byproduct I get a bunch of unique programs that I can visualize and call art. I'll probably write this in Ruby due to its simple syntax and dynamic compilation and then I will visualize in processing using ruby-processing. What I would like to know is: Is there a name for this type of programming? What currently exists in this field? Who are the primary contributors? BONUS! - In what ways can I procedurally assign value to output programs beyond compiles(y/n)? I may want to extend the functionality of this program to generate a program based on parameters, but I want the program to define those parameters through running the programs that compile and assigning meaning to the programs output. This question is probably more involved than reasonable for a bonus, but if you can think of a simple way to get something like this done in less than 23 lines or one hyperlink, please toss it into your response. I know that this is not quite meta-programming and from the little I know of AI and generative algorithms they are usually more goal oriented than what I am thinking. What would be optimal is a program that continually rewrites and improves itself so I don't have to ^_^

    Read the article

  • java concurrency: many writers, one reader

    - by Janning
    I need to gather some statistics in my software and i am trying to make it fast and correct, which is not easy (for me!) first my code so far with two classes, a StatsService and a StatsHarvester public class StatsService { private Map<String, Long> stats = new HashMap<String, Long>(1000); public void notify ( String key ) { Long value = 1l; synchronized (stats) { if (stats.containsKey(key)) { value = stats.get(key) + 1; } stats.put(key, value); } } public Map<String, Long> getStats ( ) { Map<String, Long> copy; synchronized (stats) { copy = new HashMap<String, Long>(stats); stats.clear(); } return copy; } } this is my second class, a harvester which collects the stats from time to time and writes them to a database. public class StatsHarvester implements Runnable { private StatsService statsService; private Thread t; public void init ( ) { t = new Thread(this); t.start(); } public synchronized void run ( ) { while (true) { try { wait(5 * 60 * 1000); // 5 minutes collectAndSave(); } catch (InterruptedException e) { e.printStackTrace(); } } } private void collectAndSave ( ) { Map<String, Long> stats = statsService.getStats(); // do something like: // saveRecords(stats); } } At runtime it will have about 30 concurrent running threads each calling notify(key) about 100 times. Only one StatsHarvester is calling statsService.getStats() So i have many writers and only one reader. it would be nice to have accurate stats but i don't care if some records are lost on high concurrency. The reader should run every 5 Minutes or whatever is reasonable. Writing should be as fast as possible. Reading should be fast but if it locks for about 300ms every 5 minutes, its fine. I've read many docs (Java concurrency in practice, effective java and so on), but i have the strong feeling that i need your advice to get it right. I hope i stated my problem clear and short enough to get valuable help.

    Read the article

  • Creating and writing file from a FileOutputStream in Java

    - by Althane
    Okay, so I'm working on a project where I use a Java program to initiate a socket connection between two classes (a FileSender and FileReceiver). My basic idea was that the FileSender would look like this: try { writer = new DataOutputStream(connect.getOutputStream()); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } //While we have bytes to send while(filein.available() >0){ //We write them out to our buffer writer.write(filein.read(outBuffer)); writer.flush(); } //Then close our filein filein.close(); //And then our socket; connect.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); The constructor contains code that checks to see if the file exists, and that the socket is connected, and so on. Inside my FileReader is this though: input = recvSocket.accept(); BufferedReader br = new BufferedReader(new InputStreamReader(input.getInputStream())); FileOutputStream fOut= new FileOutputStream(filename); String line = br.readLine(); while(line != null){ fOut.write(line.getBytes()); fOut.flush(); line = br.readLine(); } System.out.println("Before RECV close statements"); fOut.close(); input.close(); recvSocket.close(); System.out.println("After RECV clsoe statements"); All inside a try-catch block. So, what I'm trying to do is have the FileSender reading in the file, converting to bytes, sending and flushing it out. FileReceiver, then reads in the bytes, writes to the fileOut, flushes, and continues waiting for more. I make sure to close all the things that I open, so... here comes the weird part. When I try and open the created text file in Eclipse, it tells me "An SWT error has occured ... recommended to exit the workbench... see .log for more details.". Another window pops up saying "Unhandled event loop exception, (no more handles)". However, if I try to open the sent text file in notepad2, I get ThisIsASentTextfile Which is good (well, minus the fact that there should be line breaks, but I'm working on that...). Does anyone know why this is happening? And while we're checking, how to add the line breaks? (And is this a particularly bad way to transfer files over java without getting some other libraries?)

    Read the article

  • Alternative to Page_Load in ASP.NET (and a good WTF story)

    - by Jason
    Woo, I have a doozy of a problem (might even be one for the Daily WTF) and I'm hoping there's a solution. (My apologies for the long post...) I have been working on a website that I inherited about a month ago. One of the parts I have been working on is fixing one of the controls (essentially a dynamic header bar) so that it displays additional information as requested by my users. As part of doing this project, I created a Site.master file so that I wouldn't have to recode the header bar into every single page. When I first started doing this, it seemingly worked very well. All the pages I had developed looked great and the bar updated as it should displaying the information as it should. Well, when I dropped the Site.master (and this control) into older site pages (ones I did not specifically develop) I noticed that it looked bad on some of them, but not all of them. When I say it looked bad, basically, the control would left-align itself to the page rather than center as it should. I spent a couple hours debugging to no avail - CSS looked correct, the HTML appeared to be okay, I didn't see anything in the Javascript (although, I did miss something as I'll point out in a second), and even the old code looked correct (to the best that it could - it's not very well written). Another coworker took a look at the site and couldn't find anything at first, either. It wasn't until I just thought to look at the rendered source code of the page (I had been working in the developer view up to this point in IE8) that it became clear what was wrong. The original developer performs searches on many of the pages. To accomplish this, he queries the database for ALL the data and then loads them into Javascript arrays within the page so he can get access to them. This in itself is a huge problem because we're talking about thousands of items, and it obviously isn't scalable (and, yes, the site is slow). However, it finally clicked what was screwing up the Site.master - when he loads the data into the Javascript arrays, he writes out the data to the HTML upon Page_Load using numerous Response.Write(string) calls. The WTF (and what was messing me up) is that he inserts the Javascript before the DOCTYPE causing IE to go into quirks mode! So, because I need to at least get this release out (I'll fix the real problem later), I was wondering: is there a way I can force this Javascript to be inserted elsewhere into the HTML—after the DOCTYPE at the very least? Right now, all the Response.Write() calls are being done in the Page_Load method. I just need them to be inserted later.

    Read the article

  • Who calls the Destructor of the class when operator delete is used in multiple inheritance.

    - by dicaprio-leonard
    This question may sound too silly, however , I don't find concrete answer any where else. With little knowledge on how late binding works and virtual keyword used in inheritance. As in the code sample, when in case of inheritance where a base class pointer pointing to a derived class object created on heap and delete operator is used to deallocate the memory , the destructor of the of the derived and base will be called in order only when the base destructor is declared virtual function. Now my question is : 1) When the destructor of base is not virtual, why the problem of not calling derived dtor occur only when in case of using "delete" operator , why not in the case given below: derived drvd; base *bPtr; bPtr = &drvd; //DTOR called in proper order when goes out of scope. 2) When "delete" operator is used, who is reponsible to call the destructor of the class? The operator delete will have an implementation to call the DTOR ? or complier writes some extra stuff ? If the operator has the implementation then how does it looks like , [I need sample code how this would have been implemented]. 3) If virtual keyword is used in this example, how does operator delete now know which DTOR to call? Fundamentaly i want to know who calls the dtor of the class when delete is used. Sample Code class base { public: base() { cout<<"Base CTOR called"<<endl; } virtual ~base() { cout<<"Base DTOR called"<<endl; } }; class derived:public base { public: derived() { cout<<"Derived CTOR called"<<endl; } ~derived() { cout<<"Derived DTOR called"<<endl; } }; I'm not sure if this is a duplicate, I couldn't find in search. int main() { base *bPtr = new derived(); delete bPtr;// only when you explicitly try to delete an object return 0; }

    Read the article

  • Optimising speeds in HDF5 using Pytables

    - by Sree Aurovindh
    The problem is with respect to the writing speed of the computer (10 * 32 bit machine) and the postgresql query performance.I will explain the scenario in detail. I have data about 80 Gb (along with approprite database indexes in place). I am trying to read it from Postgresql database and writing it into HDF5 using Pytables.I have 1 table and 5 variable arrays in one hdf5 file.The implementation of Hdf5 is not multithreaded or enabled for symmetric multi processing.I have rented about 10 computers for a day and trying to write them inorder to speed up my data handling. As for as the postgresql table is concerned the overall record size is 140 million and I have 5 primary- foreign key referring tables.I am not using joins as it is not scalable So for a single lookup i do 6 lookup without joins and write them into hdf5 format. For each lookup i do 6 inserts into each of the table and its corresponding arrays. The queries are really simple select * from x.train where tr_id=1 (primary key & indexed) select q_t from x.qt where q_id=2 (non-primary key but indexed) (similarly five queries) Each computer writes two hdf5 files and hence the total count comes around 20 files. Some Calculations and statistics: Total number of records : 14,37,00,000 Total number of records per file : 143700000/20 =71,85,000 The total number of records in each file : 71,85,000 * 5 = 3,59,25,000 Current Postgresql database config : My current Machine : 8GB RAM with i7 2nd generation Processor. I made changes to the following to postgresql configuration file : shared_buffers : 2 GB effective_cache_size : 4 GB Note on current performance: I have run it for about ten hours and the performance is as follows: The total number of records written for each file is about 6,21,000 * 5 = 31,05,000 The bottle neck is that i can only rent it for 10 hours per day (overnight) and if it processes in this speed it will take about 11 days which is too high for my experiments. Please suggest me on how to improve. Questions: 1. Should i use Symmetric multi processing on those desktops(it has 2 cores with about 2 GB of RAM).In that case what is suggested or prefereable? 2. If i change my postgresql configuration file and increase the RAM will it enhance my process. 3. Should i use multi threading.. In that case any links or pointers would be of great help Thanks Sree aurovindh V

    Read the article

  • mounting ext4 fs with block size of 65536

    - by seaquest
    I am doing some benchmarking on EXT4 performance on Compact Flash media. I have created an ext4 fs with block size of 65536. however I can not mount it on ubuntu-10.10-netbook-i386. (it is already mounting ext4 fs with 4096 bytes of block sizes) According to my readings on ext4 it should allow such big block sized fs. I want to hear your comments. root@ubuntu:~# mkfs.ext4 -b 65536 /dev/sda3 Warning: blocksize 65536 not usable on most systems. mke2fs 1.41.12 (17-May-2010) mkfs.ext4: 65536-byte blocks too big for system (max 4096) Proceed anyway? (y,n) y Warning: 65536-byte blocks too big for system (max 4096), forced to continue Filesystem label= OS type: Linux Block size=65536 (log=6) Fragment size=65536 (log=6) Stride=0 blocks, Stripe width=0 blocks 19968 inodes, 19830 blocks 991 blocks (5.00%) reserved for the super user First data block=0 1 block group 65528 blocks per group, 65528 fragments per group 19968 inodes per group Writing inode tables: done Creating journal (1024 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 37 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. root@ubuntu:~# tune2fs -l /dev/sda3 tune2fs 1.41.12 (17-May-2010) Filesystem volume name: <none> Last mounted on: <not available> Filesystem UUID: 4cf3f507-e7b4-463c-be11-5b408097099b Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 19968 Block count: 19830 Reserved block count: 991 Free blocks: 18720 Free inodes: 19957 First block: 0 Block size: 65536 Fragment size: 65536 Blocks per group: 65528 Fragments per group: 65528 Inodes per group: 19968 Inode blocks per group: 78 Flex block group size: 16 Filesystem created: Sat Feb 5 14:39:55 2011 Last mount time: n/a Last write time: Sat Feb 5 14:40:02 2011 Mount count: 0 Maximum mount count: 37 Last checked: Sat Feb 5 14:39:55 2011 Check interval: 15552000 (6 months) Next check after: Thu Aug 4 14:39:55 2011 Lifetime writes: 70 MB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: afb5b570-9d47-4786-bad2-4aacb3b73516 Journal backup: inode blocks root@ubuntu:~# mount -t ext4 /dev/sda3 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/sda3, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

    Read the article

  • Using IOperationBehavior to supply a WCF parameter

    - by Chris Kemp
    This is my first step into the world of stackoverflow, so apologies if I cock anything up. I'm trying to create a WCF Operation which has a parameter that is not exposed to the outside world, but is instead automatically passed into the function. So the world sees this: int Add(int a, int b) But it is implemented as: int Add(object context, int a, int b) Then, the context gets supplied by the system at run-time. The example I'm working with is completely artificial, but mimics something that I'm looking into in a real-world scenario. I'm able to get close, but not quite the whole way there. First off, I created a simple method and wrote an application to confirm it works. It does. It returns a + b and writes the context as a string to my debug. Yay. [OperationContract] int Add(object context, int a, int b); I then wrote the following code: public class SupplyContextAttribute : Attribute, IOperationBehavior { public void Validate(OperationDescription operationDescription) { if (!operationDescription.Messages.Any(m => m.Body.Parts.First().Name == "context")) throw new FaultException("Parameter 'context' is missing."); } public void ApplyDispatchBehavior(OperationDescription operationDescription, DispatchOperation dispatchOperation) { dispatchOperation.Invoker = new SupplyContextInvoker(dispatchOperation.Invoker); } public void ApplyClientBehavior(OperationDescription operationDescription, ClientOperation clientOperation) { } public void AddBindingParameters(OperationDescription operationDescription, BindingParameterCollection bindingParameters) { // Remove the 'context' parameter from the inbound message operationDescription.Messages[0].Body.Parts.RemoveAt(0); } } public class SupplyContextInvoker : IOperationInvoker { readonly IOperationInvoker _invoker; public SupplyContextInvoker(IOperationInvoker invoker) { _invoker = invoker; } public object[] AllocateInputs() { return _invoker.AllocateInputs().Skip(1).ToArray(); } private object[] IntroduceContext(object[] inputs) { return new[] { "MyContext" }.Concat(inputs).ToArray(); } public object Invoke(object instance, object[] inputs, out object[] outputs) { return _invoker.Invoke(instance, IntroduceContext(inputs), out outputs); } public IAsyncResult InvokeBegin(object instance, object[] inputs, AsyncCallback callback, object state) { return _invoker.InvokeBegin(instance, IntroduceContext(inputs), callback, state); } public object InvokeEnd(object instance, out object[] outputs, IAsyncResult result) { return _invoker.InvokeEnd(instance, out outputs, result); } public bool IsSynchronous { get { return _invoker.IsSynchronous; } } } And my WCF operation now looks like this: [OperationContract, SupplyContext] int Amend(object context, int a, int b); My updated references no longer show the 'context' parameter, which is exactly what I want. The trouble is that whenver I run the code, it gets past the AllocateInputs and then throws an Index was outside the bounds of the Array. error somewhere in the WCF guts. I've tried other things, and I find that I can successfully change the type of the parameter and rename it and have my code work. But the moment I remove the parameter it falls over. Can anyone give me some idea of how to get this to work (or if it can be done at all).

    Read the article

  • Myself throwing NullReferenceException... needs help

    - by Amit Ranjan
    I know it might be a weird question and its Title too, but i need your help. I am a .net dev , working on platform for the last 1.5 years. I am bit confused on the term usually we say " A Good Programmer ". I dont know ,what are the qualities of a good programmer ? Is the guy who writes a bug free code? or Can develop applications solely? or blah blah blah...lots of points. I dont know... But as far i am concerned , I know I am not a good programmer, still in learning phase an needs a lot to learn in coming days. So you guys are requested to please help me with this two problems of mine My first problem is regarding the proper Error Handling, which is a most debatable aspect of programming. We all know we use ` try { } catch { } finally { } ` in our code to manage exception. But even if I use try { } catch(exception ex) { throw ex } finally { } , different guys have different views. I still dont know the good way to handle errors. I can write code, use try-catch but still i feel I lacks something. When I saw the codes generated by .net fx tools even they uses throw ex or `throw new Exception("this is my exception")`.. I am just wondering what will be the best way to achieve the above. All means the same thing but why we avoid something. If it has some demerits then it must be made obselete.Anyways I still dont have one [how to handle errors efficiently?]. I generally follow the try-catch(execoption ex){throw ex}, and usually got stucked in debates with leads why you follow this why not that... 2.Converting your entire code blocks in modules using Design patterns of some OOPs concepts. How do you guys decide what architeture or pattern will be the best for my upcoming application based on its working, flow etc. I need to know what you guys can see that I can't. Since I know , I dont have that much experience but I can say, with my experience that experience doesnot comes either from degree/certificates or success you made instead it cames from failures you faced or got stucking situations. Pleas help me out.

    Read the article

  • Embedded "Smart" character LCD driver. Is this a good idea?

    - by chris12892
    I have an embedded project that I am working on, and I am currently coding the character LCD driver. At the moment, the LCD driver only supports "dumb" writing. For example, let's say line 1 has some text on it, and I make a call to the function that writes to the line. The function will simply seek to the beginning of the line and write the text (plus enough whitespace to erase whatever was last written). This is well and good, but I get the feeling it is horribly inefficient sometimes, since some lines are simply: "Some-reading: some-Value" Rather than "brute force" replacing the entire line, I wanted to develop some code that would figure out the best way to update the information on the LCD. (just as background, it takes 2 bytes to seek to any char position. I can then begin writing the string) My idea was to first have a loop. This loop would compare the input to the last write, and in doing so, it would cover two things: A: Collect all the differences between the last write and the input. For every contiguous segment (be it same or different) add two bytes to the byte count. This is referenced in B to determine if we are wasting serial bandwidth. B: The loop would determine if this is really a smart thing to do. If we end up using more bytes to update the line than to "brute force" the line, then we should just return and let the brute force method take over. We should exit the smart write function as soon as this condition is met to avoid wasting time. The next part of the function would take all the differences, seek to the required char on the LCD, and write them. Thus, if we have a string like this already on the LCD: "Current Temp: 80F" and we want to update it to "Current Temp: 79F" The function will go through and see that it would take less bandwidth to simply seek to the "8" and write "79". The "7" will cover the "8" and the "9" will cover the "0". That way, we don't waste time writing out the entire string. Does this seem like a practical idea?

    Read the article

  • File Output using Gforth

    - by sheepez
    As a first project I have been writing a short program to render the Mandelbrot fractal. I have got to the point of trying to output my results to a file ( e.g. .bmp or .ppm ) and got stuck. I have not really found any examples of exactly what I am trying to do, but I have found two examples of code to copy from one file to another. The examples in the Gforth documentation ( Section 3.27 ) did not work for me ( winXP ) in fact they seemed to open and create files but not write to files properly. This is the Gforth documentation example that copies the contents of one file to another: 0 Value fd-in 0 Value fd-out : open-input ( addr u -- ) r/o open-file throw to fd-in ; : open-output ( addr u -- ) w/o create-file throw to fd-out ; s" foo.in" open-input s" foo.out" open-output : copy-file ( -- ) begin line-buffer max-line fd-in read-line throw while line-buffer swap fd-out write-line throw repeat ; I found this example ( http://rosettacode.org/wiki/File_IO#Forth ) which does work. The main problem is that I can't isolate the part that writes to a file and have it still work. The main confusion is that r doesn't seem to consume TOS as I might expect. : copy-file2 ( a1 n1 a2 n2 -- ) r/o open-file throw >r w/o create-file throw r> begin pad maxstring 2 pick read-file throw ?dup while pad swap 3 pick write-file throw repeat close-file throw close-file throw ; \ Invoke it like this: s" output.txt" s" input.txt" copy-file I would be very grateful if someone could explain exactly how the open, create read and write -file words actually work, as my investigation keeps resulting in somewhat bizarre stacks. Any clues as to why the Gforth examples do not work might help too. In summary, I want to output from Gforth to a file and so far have been thwarted. Can anyone offer any help? Thank you Vijay, I think that I understand the example that you gave. However when I try to use something like this ( which I think is similar ): 0 value test-file : write-test s" testfile.out" w/o create-file throw to test-file s" test text" test-file write-line ; I get ok but nothing is put into the file, have I made a mistake? It seems that the problem was due to not flushing the relevant buffers or explicitly closing the file. Adding something like test-file flush-file throw or test-file close-file throw between write-line and ; makes it work. Thanks again Vijay for helping.

    Read the article

  • Codeigniter not returning me to upload form after image upload.

    - by Drew
    I'm still very new to codeigniter. The issue i'm having is that the file uploads fine and it writes to the database without issue but it just doesn't return me to the upload form. Instead it stays in the do_upload and doesn't display anything. Even more bizarrely there is some source code behind the scenes. Can someone tell my what it is i'm doing wrong because I want to be returning to my upload form after submission. Thanks in advance. Below is my code: Controller: function do_upload() { if($this->Upload_model->do_upload()) { $this->load->view('home/upload_form'); }else{ $this->load->view('home/upload_success', $error); } } Model: function do_upload() { $config['upload_path'] = './uploads/'; $config['allowed_types'] = 'gif|jpg|png'; $config['max_size'] = '2000'; $this->load->library('upload', $config); if ( ! $this->upload->do_upload()) { $error = array('error' => $this->upload->display_errors()); return $error; } else { $data = $this->upload->data(); $full_path = 'uploads/' . $data['file_name']; $spam = array( 'image_url' => $full_path, 'url' => $this->input->post('url') ); $id = $this->input->post('id'); $this->db->where('id', $id); $this->db->update('NavItemData', $spam); return true; } } View (called upload_form): <html> <head> <title>Upload Form</title> </head> <body> <?php if(isset($buttons)) : foreach($buttons as $row) : ?> <h2><?php echo $row->image_url; ?></h2> <p><?php echo $row->url; ?></p> <p><?php echo $row->name; ?></p> <p><?php echo anchor("upload/update_nav/$row->id", 'edit'); ?></p> <?php endforeach; ?> <?php endif; ?> </body> </html>

    Read the article

  • Getting access to a binary response byte-by-byte in classic asp/JScript

    - by user89691
    I asked this question a few days ago but it seems to have gone cold fairly quickly. What I want to do is pretty simple and I can't believe someone hasn't figured it out. Solution needs to be JScript classic ASP. I am reading a file from a remote server and I want to process that (binary) file on my server and spit the results back to the client as XML. Here's a simplified version of what I am trying to do. This code runs, or will if the URL is filled in for your site. This test file is readbin.asp. It reads a file called test.bin, and writes the result to a stream. I used a stream because that makes it easier to read the file and parse the contents. Basically I want to: while not end of stream read byte from stream process byte here is readbin.asp: <%@ LANGUAGE = JScript %> <% var url = "http:// (... your URL to the file test.bin goes here...) " ; var xmlhttp = Server.CreateObject ("MSXML2.ServerXMLHTTP") ; xmlhttp.open ("GET", url, false) ; xmlhttp.send () ; var BinaryInputStream = Server.CreateObject ("ADODB.Stream") ; BinaryInputStream.Type = 1 ; // binary BinaryInputStream.Open ; BinaryInputStream.Write (xmlhttp.responseBody) ; BinaryInputStream.Position = 0 ; Response.Write ("BinaryInputStream.size = " + BinaryInputStream.size + "<br>") ; Response.Write ("BinaryInputStream = " + BinaryInputStream + "<br>") ; var ByteValue = BinaryInputStream.read (1) ; Response.Write ("ByteValue = " + ByteValue + "<br>") ; Response.Write ("typeof (ByteValue) = " + typeof (ByteValue) + "<br>") ; %> My problem is: how do I get ByteValue as a number 0..255? typeof (ByteValue) is "unknown". Ord?? Byte()?? Asc?? Chr??

    Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >