Search Results

Search found 15914 results on 637 pages for 'physical security'.

Page 600/637 | < Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >

  • Unable to set maxReceivedMessageSize through web.config

    - by Michael Mortensen
    Hello there, I have now investigated the 400 - BadRequest code for the last two hours. A lot of sugestions goes towards ensuring the bindingConfiguration attribute is set correctly, and in my case, it is. Now, I need YOUR help before destroying the building i am in :-) I run a WCF RestFull service (very lightweight, using this resource for inspiration: http://msdn.microsoft.com/en-us/magazine/dd315413.aspx) which (for now) accepts an XmlElement (POX) provided through the POST verb. I am currently ONLY using Fiddler's request builder before implementing a true client (as this is mixed environments). When I do this for XML smaller than 65K, it works fine - larger, it throws this exception: The maximum message size quota for incoming messages (65536) has been exceeded. To increase the quota, use the MaxReceivedMessageSize property on the appropriate binding element. Here is my web.config file (which I even included the client-tag for (desperate times!)): <system.web> <httpRuntime maxRequestLength="1500000" executionTimeout="180"/> </system.web> <system.serviceModel> <diagnostics> <messageLogging logEntireMessage="true" logMalformedMessages="true" logMessagesAtServiceLevel="true" logMessagesAtTransportLevel="true" /> </diagnostics> <bindings> <webHttpBinding> <binding name="WebHttpBinding" maxReceivedMessageSize="1500000" maxBufferPoolSize="1500000" maxBufferSize="1500000" closeTimeout="00:03:00" openTimeout="00:03:00" receiveTimeout="00:10:00" sendTimeout="00:03:00"> <readerQuotas maxStringContentLength="1500000" maxArrayLength="1500000" maxBytesPerRead="1500000" /> <security mode="None"/> </binding> </webHttpBinding> </bindings> <client> <endpoint address="" binding="webHttpBinding" bindingConfiguration="WebHttpBinding" contract="Commerce.ICatalogue"/> </client> <services> <service behaviorConfiguration="ServiceBehavior" name="Catalogue"> <endpoint address="" behaviorConfiguration="RestFull" binding="webHttpBinding" bindingConfiguration="WebHttpBinding" contract="Commerce.ICatalogue" /> <!-- endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" / --> </service> </services> <behaviors> <endpointBehaviors> <behavior name="RestFull"> <webHttp/> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <serviceDebug httpHelpPageEnabled="true" includeExceptionDetailInFaults="true"/> <serviceMetadata httpGetEnabled="true"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> Thanks in advance for any help leading to succesfull call with 65K XML ;-)

    Read the article

  • System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse request failed with HTTP status 40

    - by John Galt
    I am trying to make some enhancements to a production web app. After quite a bit of unit testing on my WinXP IIS 5.1 development machine, everything works on my localhost so I used the Visual Studio 2008 PUBLISH dialog on my Dev PC to push the following projects to a staging server: the primary web app the "primary" webservice (the home page tries to invoke this WS) a "secondary" webservice (not yet a problem because home page does not invoke this WS) I get the following when I try to browse to the home page of the web app typing this into my browser: link text Server Error in '/zVersion2' Application. The request failed with HTTP status 404: Not Found. Description: An unhandled exception occurred during the execution of the current web request.Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Net.WebException: The request failed with HTTP status 404: Not Found. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [WebException: The request failed with HTTP status 404: Not Found.] System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +431289 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +204 ProxyZipeeeService.WSZipeee.Zipeee.GetMessageByType(Int32 iMsgType) in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\ProxyZipeeeService\ProxyZipeeeService\Web References\WSZipeee\Reference.vb:2168 Zipeee.frmZipeee.LoadMessage() in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\Zipeee\frmZipeee.aspx.vb:43 Zipeee.frmZipeee.Page_Load(Object sender, EventArgs e) in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\Zipeee\frmZipeee.aspx.vb:33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +50 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627 Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3082 Here is a bit of the corresponding source code: Public wsZipeee As New ProxyZipeeeService.WSZipeee.Zipeee Dim dsStandardMsg As DataSet Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If Not Page.IsPostBack Then LoadMessage() End If End Sub Private Sub LoadMessage() Dim iCnt As Integer Dim iValue As Integer dsStandardMsg = wsZipeee.GetMessageByType(BizConstants.MsgType.Standard) End Sub I suspect I may have configured things incorrectly on the staging server. The staging server is Win Server 2003 ServicePack 2 running IIS 6.0. When I published the primary site and the 2 webservices on the staging server called MOJITO I created the physical directories for each on the D drive. Then using INETMGR, I configured the following virtual directories: zVersion2 zVersion2wsSQL zVersion2wsEmergency All of the above are configured to use a new application pool I setup and named zVersion2aspNet20. The default web site for this machine MOJITO is configured to use ASP.NET 1.1 and the IP address is set to (All Unassigned). The production versions of the latter 2 webservices run on the MOJITO machine (named ZipeeeService and EmergencyService respectively). Can my staging versions of the above webservices (named zVersion2wsSQL and zVersion2wsEmergency respectively) co-exist on the same web server with the same IP address? Please note that when I test the zVersion2wsSQL webservice independently (from INETMGR right-mouse and click Browse) it works as expected (i.e. presenting all the methods of the webservice) like this snippet: GetMessageByType MessageName="Get_x0020_Message_x0020_By_x0020_Type" I can test this webmethod by clicking on it and it presents the Test dialog (because it takes a simple datatype and I am invoking it on localhost (i.e. MOJITO): **Get Message By Type** **Test** To test the operation using the HTTP POST protocol, click the 'Invoke' button. Parameter Value iMsgType: _______ [INVOKE button] SOAP 1.1 ....etc. I fear I may have rambled with too much information so I will stop but I hope someone can help me as I cannot understand why this request results in a "not found". Thanks.

    Read the article

  • Unauthorized Sharepoint WSDL from Coldfusion 8

    - by antony.trupe
    How do I solve the error: Unable to read WSDL from URL: https://workflowtest.site.edu/_vti_bin/Lists.asmx?WSDL. Error: 401 Unauthorized. I can successfully view the WSDL from the browser using the same user account. I'm not sure which authentication is being used (Basic or Integrated). How would I find that out? The code making the call is: <cfinvoke username="username" password="password" webservice="https://workflowtest.liberty.edu/_vti_bin/Lists.asmx?WSDL" method="GetList" listName="{CB02EB71-392E-4906-B512-8EC002F72436}" > The impression I get is that coldfusion doesn't like being made to authenticate to get the WSDL. Full stack trace: coldfusion.xml.rpc.XmlRpcServiceImpl$CantFindWSDLException: Unable to read WSDL from URL: https://workflowtest.liberty.edu/_vti_bin/Lists.asmx?WSDL. at coldfusion.xml.rpc.XmlRpcServiceImpl.retrieveWSDL(XmlRpcServiceImpl.java:709) at coldfusion.xml.rpc.XmlRpcServiceImpl.access$000(XmlRpcServiceImpl.java:53) at coldfusion.xml.rpc.XmlRpcServiceImpl$1.run(XmlRpcServiceImpl.java:239) at java.security.AccessController.doPrivileged(Native Method) at coldfusion.xml.rpc.XmlRpcServiceImpl.registerWebService(XmlRpcServiceImpl.java:232) at coldfusion.xml.rpc.XmlRpcServiceImpl.getWebService(XmlRpcServiceImpl.java:496) at coldfusion.xml.rpc.XmlRpcServiceImpl.getWebServiceProxy(XmlRpcServiceImpl.java:450) at coldfusion.tagext.lang.InvokeTag.doEndTag(InvokeTag.java:413) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2662) at cftonytest2ecfm1787185330.runPage(/var/www/webroot/tonytest.cfm:16) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:279) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:74) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    Read the article

  • Unable to resolve class in build.gradle using Android Studio 0.60/Gradle 0.11

    - by saywhatnow
    Established app working fine using Android Studio 0.5.9/ Gradle 0.9 but upgrading to Android Studio 0.6.0/ Gradle 0.11 causes the error below. Somehow Studio seems to have lost the ability to resolve the android tools import at the top of the build.gradle file. Anyone got any ideas on how to solve this? build file 'Users/[me]/Repositories/[project]/[module]/build.gradle': 1: unable to resolve class com.android.builder.DefaultManifestParser @ line 1, column 1. import com.android.builder.DefaultManifestParser 1 error at org.codehaus.groovy.control.ErrorCollector.failIfErrors(ErrorCollector.java:302) at org.codehaus.groovy.control.CompilationUnit.applyToSourceUnits(CompilationUnit.java:858) at org.codehaus.groovy.control.CompilationUnit.doPhaseOperation(CompilationUnit.java:548) at org.codehaus.groovy.control.CompilationUnit.compile(CompilationUnit.java:497) at groovy.lang.GroovyClassLoader.doParseClass(GroovyClassLoader.java:306) at groovy.lang.GroovyClassLoader.parseClass(GroovyClassLoader.java:287) at org.gradle.groovy.scripts.internal.DefaultScriptCompilationHandler.compileScript(DefaultScriptCompilationHandler.java:115) ... 77 more 2014-06-09 10:15:28,537 [ 92905] INFO - .BaseProjectImportErrorHandler - Failed to import Gradle project at '/Users/[me]/Repositories/[project]' org.gradle.tooling.BuildException: Could not run build action using Gradle distribution 'http://services.gradle.org/distributions/gradle-1.12-all.zip'. at org.gradle.tooling.internal.consumer.ResultHandlerAdapter.onFailure(ResultHandlerAdapter.java:53) at org.gradle.tooling.internal.consumer.async.DefaultAsyncConsumerActionExecutor$1$1.run(DefaultAsyncConsumerActionExecutor.java:57) at org.gradle.internal.concurrent.DefaultExecutorFactory$StoppableExecutorImpl$1.run(DefaultExecutorFactory.java:64) [project]/[module]/build.gradle import com.android.builder.DefaultManifestParser apply plugin: 'android-sdk-manager' apply plugin: 'android' android { sourceSets { main { manifest.srcFile 'src/main/AndroidManifest.xml' res.srcDirs = ['src/main/res'] } debug { res.srcDirs = ['src/debug/res'] } release { res.srcDirs = ['src/release/res'] } } compileSdkVersion 19 buildToolsVersion '19.0.0' defaultConfig { minSdkVersion 14 targetSdkVersion 19 } signingConfigs { release } buildTypes { release { runProguard false proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.txt' signingConfig signingConfigs.release applicationVariants.all { variant -> def file = variant.outputFile def manifestParser = new DefaultManifestParser() def wmgVersionCode = manifestParser.getVersionCode(android.sourceSets.main.manifest.srcFile) println wmgVersionCode variant.outputFile = new File(file.parent, file.name.replace("-release.apk", "_" + wmgVersionCode + ".apk")) } } } packagingOptions { exclude 'META-INF/LICENSE.txt' exclude 'META-INF/NOTICE.txt' } } def Properties props = new Properties() def propFile = file('signing.properties') if (propFile.canRead()){ props.load(new FileInputStream(propFile)) if (props!=null && props.containsKey('STORE_FILE') && props.containsKey('STORE_PASSWORD') && props.containsKey('KEY_ALIAS') && props.containsKey('KEY_PASSWORD')) { println 'RELEASE BUILD SIGNING' android.signingConfigs.release.storeFile = file(props['STORE_FILE']) android.signingConfigs.release.storePassword = props['STORE_PASSWORD'] android.signingConfigs.release.keyAlias = props['KEY_ALIAS'] android.signingConfigs.release.keyPassword = props['KEY_PASSWORD'] } else { println 'RELEASE BUILD NOT FOUND SIGNING PROPERTIES' android.buildTypes.release.signingConfig = null } }else { println 'RELEASE BUILD NOT FOUND SIGNING FILE' android.buildTypes.release.signingConfig = null } repositories { maven { url 'https://repo.commonsware.com.s3.amazonaws.com' } maven { url 'https://oss.sonatype.org/content/repositories/snapshots/' } } dependencies { compile 'com.github.gabrielemariotti.changeloglib:library:1.4.+' compile 'com.google.code.gson:gson:2.2.4' compile 'com.google.android.gms:play-services:+' compile 'com.android.support:appcompat-v7:+' compile 'com.squareup.okhttp:okhttp:1.5.+' compile 'com.octo.android.robospice:robospice:1.4.11' compile 'com.octo.android.robospice:robospice-cache:1.4.11' compile 'com.octo.android.robospice:robospice-retrofit:1.4.11' compile 'com.commonsware.cwac:security:0.1.+' compile 'com.readystatesoftware.sqliteasset:sqliteassethelper:+' compile 'com.android.support:support-v4:19.+' compile 'uk.co.androidalliance:edgeeffectoverride:1.0.1+' compile 'de.greenrobot:eventbus:2.2.1+' compile project(':captureActivity') compile ('de.keyboardsurfer.android.widget:crouton:1.8.+') { exclude group: 'com.google.android', module: 'support-v4' } compile files('libs/CWAC-LoaderEx.jar') }

    Read the article

  • Winforms TabControl causing spurious Paint events for UserControl

    - by Tom Bushell
    For our project, we've written a WinForms UserControl for graphing. We're seeing some strange behavior when our control is sited in a TabControl - our control continuously fires Paint events, even when there is absolutely no activity by the user. We only see this in the TabControl. When we site our control in other containers such as Forms or Splitters, Paint is only fired when you'd expect e.g. when the control is first displayed, etc. Can anyone suggest why this might be happening? Here's a stack trace from a breakpoint in our control's Paint handler, if that's any help. OverlordFrontEnd.exe!OverlordFrontEnd.MainForm.graphControl_Paint(object sender = BI_BaseGraphXY.BaseGraphXY}, System.Windows.Forms.PaintEventArgs e = {ClipRectangle = {X=0,Y=0,Width=1031,Height=408}}) Line 422 C# System.Windows.Forms.dll!System.Windows.Forms.Control.OnPaint(System.Windows.Forms.PaintEventArgs e) + 0x73 bytes BI_AppCore.dll!BI_BaseGraphXY.BaseGraphXY.OnPaint(System.Windows.Forms.PaintEventArgs e = {ClipRectangle = {X=0,Y=0,Width=1031,Height=408}}) Line 377 + 0xb bytes C# System.Windows.Forms.dll!System.Windows.Forms.Control.PaintTransparentBackground(System.Windows.Forms.PaintEventArgs e, System.Drawing.Rectangle rectangle, System.Drawing.Region transparentRegion = null) + 0x16c bytes System.Windows.Forms.dll!System.Windows.Forms.Control.PaintBackground(System.Windows.Forms.PaintEventArgs e = {ClipRectangle = {X=0,Y=0,Width=1029,Height=406}}, System.Drawing.Rectangle rectangle, System.Drawing.Color backColor, System.Drawing.Point scrollOffset) + 0xbc bytes System.Windows.Forms.dll!System.Windows.Forms.Control.PaintBackground(System.Windows.Forms.PaintEventArgs e, System.Drawing.Rectangle rectangle) + 0x63 bytes System.Windows.Forms.dll!System.Windows.Forms.Control.OnPaintBackground(System.Windows.Forms.PaintEventArgs pevent) + 0x59 bytes System.Windows.Forms.dll!System.Windows.Forms.Control.PaintWithErrorHandling(System.Windows.Forms.PaintEventArgs e = {ClipRectangle = {X=0,Y=0,Width=1029,Height=406}}, short layer, bool disposeEventArgs = false) + 0x74 bytes System.Windows.Forms.dll!System.Windows.Forms.Control.WmPaint(ref System.Windows.Forms.Message m) + 0x1ba bytes System.Windows.Forms.dll!System.Windows.Forms.Control.WndProc(ref System.Windows.Forms.Message m) + 0x33e bytes System.Windows.Forms.dll!System.Windows.Forms.Control.ControlNativeWindow.OnMessage(ref System.Windows.Forms.Message m) + 0x10 bytes System.Windows.Forms.dll!System.Windows.Forms.Control.ControlNativeWindow.WndProc(ref System.Windows.Forms.Message m) + 0x31 bytes System.Windows.Forms.dll!System.Windows.Forms.NativeWindow.Callback(System.IntPtr hWnd, int msg = 15, System.IntPtr wparam, System.IntPtr lparam) + 0x5a bytes [Native to Managed Transition] [Managed to Native Transition] System.Windows.Forms.dll!System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(int dwComponentID, int reason = -1, int pvLoopData = 0) + 0x24e bytes System.Windows.Forms.dll!System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(int reason = -1, System.Windows.Forms.ApplicationContext context = {Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.WinFormsAppContext}) + 0x177 bytes System.Windows.Forms.dll!System.Windows.Forms.Application.ThreadContext.RunMessageLoop(int reason, System.Windows.Forms.ApplicationContext context) + 0x61 bytes System.Windows.Forms.dll!System.Windows.Forms.Application.Run(System.Windows.Forms.ApplicationContext context) + 0x18 bytes Microsoft.VisualBasic.dll!Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun() + 0x81 bytes Microsoft.VisualBasic.dll!Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel() + 0xef bytes Microsoft.VisualBasic.dll!Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(string[] commandLine) + 0x2c0 bytes OverlordFrontEnd.exe!OverlordFrontEnd.Program.Main() Line 36 + 0x10 bytes C# [Native to Managed Transition] [Managed to Native Transition] mscorlib.dll!System.AppDomain.ExecuteAssembly(string assemblyFile, System.Security.Policy.Evidence assemblySecurity, string[] args) + 0x3a bytes Microsoft.VisualStudio.HostingProcess.Utilities.dll!Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() + 0x2b bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart_Context(object state) + 0x66 bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state) + 0x6f bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart() + 0x44 bytes

    Read the article

  • Snow Leopard sqlite3-ruby install problem

    - by JZ
    UPDATE 3/20/10 I'm running Mac OSX Snow Leopard, this problem is caused by a recent train wreck in which I updated ruby without RVM. I've attempted to properly install/run RVM, however I can't get it to work. I am unable to install the sqlite3-ruby gem. I get the following ERROR: Error installing sqlite3-ruby: ERROR: Failed to build gem native extension. How do I fix this? justin-zollarss-mac-pro:~ justinz$ rails -v Rails 2.3.5 justin-zollarss-mac-pro:~ justinz$ ruby -v ruby 1.8.7 (2008-08-11 patchlevel 72) [i686-darwin10.2.0] justin-zollarss-mac-pro:~ justinz$ gem -v 1.3.5 justin-zollarss-mac-pro:~ justinz$ which gem /usr/local/bin/gem justin-zollarss-mac-pro:~ justinz$ whereis gem /usr/bin/gem justin-zollarss-mac-pro:~ justinz$ which ruby /usr/local/bin/ruby justin-zollarss-mac-pro:~ justinz$ whereis ruby /usr/bin/ruby justin-zollarss-mac-pro:~ justinz$ which rails /usr/local/bin/rails justin-zollarss-mac-pro:~ justinz$ whereis rails /usr/bin/rails justin-zollarss-mac-pro:~ justinz$ gem list *** LOCAL GEMS *** actionmailer (2.3.5) actionpack (2.3.5) activerecord (2.3.5) activeresource (2.3.5) activesupport (2.3.5) builder (2.1.2) bundler (0.9.11) columnize (0.3.1) erubis (2.6.5) fastercsv (1.5.1) ffi (0.6.3) gbarcode (0.98.16) i18n (0.3.5) linecache (0.43) mail (2.1.3) memcache-client (1.8.0) prawn (0.8.4) prawn-core (0.8.4) prawn-layout (0.8.4) prawn-security (0.8.4) rack (1.1.0, 1.0.1) rack-mount (0.6.1) rack-test (0.5.3) rails (2.3.5) rake (0.8.7) ruby-debug (0.10.3) ruby-debug-base (0.10.3) rubygems-update (1.3.6) sqlite3 (0.0.8) text-format (1.0.0) thor (0.13.4) tzinfo (0.3.17) justin-zollarss-mac-pro:~ justinz$ sudo gem install sqlite3-ruby Password: Building native extensions. This could take a while... ERROR: Error installing sqlite3-ruby: ERROR: Failed to build gem native extension. /usr/local/bin/ruby extconf.rb checking for fdatasync() in -lrt... no checking for sqlite3.h... yes checking for sqlite3_open() in -lsqlite3... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/local/bin/ruby --with-sqlite3-dir --without-sqlite3-dir --with-sqlite3-include --without-sqlite3-include=${sqlite3-dir}/include --with-sqlite3-lib --without-sqlite3-lib=${sqlite3-dir}/lib --with-rtlib --without-rtlib --with-sqlite3lib --without-sqlite3lib Gem files will remain installed in /usr/local/lib/ruby/gems/1.8/gems/sqlite3-ruby-1.2.5 for inspection. Results logged to /usr/local/lib/ruby/gems/1.8/gems/sqlite3-ruby-1.2.5/ext/sqlite3_api/gem_make.out

    Read the article

  • Using pfSense, OpenVPN Connects but Still Can't See the Network

    - by nicorellius
    I am having an OpenVPN issue. I have a pfSense box at home configured to allow traffic through a VPN tunnel. The client computer is Windows XP Home, behind a standard Comcast connection and a Netgear wireless router. I use OpenVPN to access my work network (from where I am trying to get out of in this post) from home (with an XP Pro machine behind pfSense), and this works fine. The client config is similar but has the changes specific to my setup... Here is my XP Home config: client dev tun proto tcp remote pfsense.*.org 1194 (starred out by me) resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 When I launch the OpenVPN GUI, the Tunnel TAP network connection turns red, and I can right-click that to connect to the server. Everything seems to work fine until I browse for the actual network. The Tunnel TAP connection turns green and it says connected to 10.1.1.6 (I have tried different IP pools here too with no luck). I can see the internal network fine, but my home network behind pfSense is not there. I have tried browsing there by using Tools Map Network Drive, using the browser, with no success. When I open the command line on the client and use the ipconfig -all command, I get the following: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TAP-Win32 Adapter V9 Physical Address. . . . . . . . . : *** (starred out by me) Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.1.1.6 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . . . : 10.1.1.5 Lease Obtained. . . . . . . . . . : Monday, March 15, 2010 1:18:37 PM Lease Expires . . . . . . . . . . : Tuesday, March 15, 2011 1:18:37 PM I noticed that the default gateway is not present. Could this be my problem? I am still relatively new to firewalls, VPN, and network configuration so I'm sure I am messing up something simple. Oh yah, I should note that I have firewall rules configured for pfSense to allow traffic through the WAN and the LAN. At first there was just the WAN firewall rule, because that is what I got from the literature I was reading. I then created a LAN rule as well, but I'm not sure if this was correct. Neither way works, though. Screen shots below: Any help is much appreciated.

    Read the article

  • ActiveDirectoryMembershipProvider and ADAM (or AD LDS) and SetPassword

    - by Iulian
    By the subject line it seems to be a rather broad subject and I need some help here. Basically what I want is to use ActiveDirectoryMembershipProvider with an ADAM instance to authenticate users in an ASP.NET web application. My development environment is a windows 7 machine with an AD LDS instance on it whilst the QA server is a Windows 2003 server with an ADAM instance on it. I have all the required users on both instances plus one with adminsitrator role (CN=Admin,CN=xxx,DC=xxx,C=xx) which I want to use as the connection user. Using connectonProtecton="None" connectionUsername="CN=Admin,CN=xxx,DC=xxx,C=xx" connectionPassword="xxx" I am able to authenticate on both environments (dev & qa). If I change to the connectionProtection to "Secure" I am not able to authenticate anymore; the error I get is "Parser Error Message: Unable to establish secure connection with the server" To me it sounds wrong to use connectionProtection="None" although I found on the net a lot of samples using this setting. Can I use connectionProtection="Secure" to connect to an ADAM instance using an account defined on that instance having Administrator role? What other choices do I have (like using an domain account)? What if my machine where I am to deploy the application is not a part of the domain, will this affect in any way the behavior? I am novice in the respect so I would really appreciate some clear answers or some directions as where to look? Now beside the "signing in" feature of the ActiveDirectoryMembershipProvider I also want to add an extra one, which is setting the password without knowing the old one (something that will be used by a "reset password" feature). So I added a couple of extension methods to the provider, and used System.DirectoryServices classes like DirectoryEntry and the like. When creating a directory entry I use the same credentials provided in web.config for the provider minus the AuthenticationType as I don't know what is right combination of the flags that corresponds to None/Secure. I am able to use Invoke "SetPassword" with ADS_OPTION_PASSWORD_METHOD option as ADS_PASSWORD_ENCODE_CLEAR on my dev machine (w/ AD LDS instance); nevertheless on qa environment (w/ ADAM instance) I am getting an error like "Exception Details: System.DirectoryServices.DirectoryServicesCOMException: An operations error occurred. (Exception from HRESULT: 0x80072020)" I am quite sure it is not about AD LDS vs ADAM but probably another configuration / permission issue. So can anyone help me with some hints on how to use this SetPassword feature? And as a general question what are the best practices when it comes to using ADAM regarding security, programming etc? Thanks in advance Iulian

    Read the article

  • How do I work around an HTML Table rendering bug in IE 7?

    - by osmaniac
    I have a table. Some cells span multiple columns. Some cells span multiple rows and columns. But one row (which spans all columns but the rightmost one) creates an artifact. Part of the text in the cell is erroneously repeated left justified on a new row just below the table. I'm baffled. I tried rendering with and without "table-layout: fixed;". Same result. When I originally composed the design using just HTML and CSS, it looked great. But then I worked it into a page and had to add more columns to my master table the right to hold buttons. These buttons are in three groups, each having their own div to control floating and rewrapping when the window gets narrower. One div has another table inside it that groups a single row of buttons. Thus I have table inside div inside td inside outer table. I would prefer a simpler design, but how? This is what I want to have: ................................................................................... . . . . Four rows of data . Three groups of buttons that can reflow . . With several columns . if window gets narrower . . meticulously layed out, . . . That should not resize . . . when window gets narrower . . ................................................................................... . One more row of data spanning the whole screen which stays below the buttons . ................................................................................... What I was doing was putting the three divs with the buttons in the upper right in a single cell that spanned four rows. What other opportunities does CSS offer? The buttons are not allowed to overlap the data on the left or go past the data line below. The original design had the divs with the buttons NOT in a table with the data, but when the window gets narrow, some of the buttons flow such that they go underneath the data, which looks bad. I would post actual HTML, except it is generated by ASP, huge, with lots of CSS styling, and the feature that lets me view the final HTML is not working at the moment. (Built in security in the application.)

    Read the article

  • [AS3/C#] Byte encryption ( DES-CBC zero pad )

    - by mark_dj
    Hi there, Currently writing my own AMF TcpSocketServer. Everything works good so far i can send and recieve objects and i use some serialization/deserialization code. Now i started working on the encryption code and i am not so familiar with this stuff. I work with bytes , is DES-CBC a good way to encrypt this stuff? Or are there other more performant/secure ways to send my data? Note that performance is a must :). When i call: ReadAmf3Object with the decrypter specified i get an: InvalidOperationException thrown by my ReadAmf3Object function when i read out the first byte the Amf3TypeCode isn't specified ( they range from 0 to 16 i believe (Bool, String, Int, DateTime, etc) ). I got Typecodes varying from 97 to 254? Anyone knows whats going wrong? I think it has something to do with the encryption part. Since the deserializer works fine w/o the encryption. I am using the right padding/mode/key? I used: http://code.google.com/p/as3crypto/ as as3 encryption/decryption library. And i wrote an Async tcp server with some abuse of the threadpool ;) Anyway here some code: C# crypter initalization code System.Security.Cryptography.DESCryptoServiceProvider crypter = new DESCryptoServiceProvider(); crypter.Padding = PaddingMode.Zeros; crypter.Mode = CipherMode.CBC; crypter.Key = Encoding.ASCII.GetBytes("TESTTEST"); AS3 private static var _KEY:ByteArray = Hex.toArray(Hex.fromString("TESTTEST")); private static var _TYPE:String = "des-cbc"; public static function encrypt(array:ByteArray):ByteArray { var pad:IPad = new NullPad; var mode:ICipher = Crypto.getCipher(_TYPE, _KEY, pad); pad.setBlockSize(mode.getBlockSize()); mode.encrypt(array); return array; } public static function decrypt(array:ByteArray):ByteArray { var pad:IPad = new NullPad; var mode:ICipher = Crypto.getCipher(_TYPE, _KEY, pad); pad.setBlockSize(mode.getBlockSize()); mode.decrypt(array); return array; } C# read/unserialize/decrypt code public override object Read(int length) { object d; using (MemoryStream stream = new MemoryStream()) { stream.Write(this._readBuffer, 0, length); stream.Position = 0; if (this.Decrypter != null) { using (CryptoStream c = new CryptoStream(stream, this.Decrypter, CryptoStreamMode.Read)) using (AmfReader reader = new AmfReader(c)) { d = reader.ReadAmf3Object(); } } else { using (AmfReader reader = new AmfReader(stream)) { d = reader.ReadAmf3Object(); } } } return d; }

    Read the article

  • Windows Server 2008 R2 + IIS 7.5 + ASP.NET 4.0 = HTTP Error 500.0

    - by Dave
    I am having an impossible time getting asp.net 4.0 to work in any fashion at all. In fact, I completely wiped my server, reinstalled with Server 2008 R2 Standard (running on a VMWare ESXi box, not that it should matter), and cannot even get a test .aspx page to work. Here is exactly what I did: Installed 2008 R2 Standard Activated windows and enabled Remote Desktop Installed the Web Server Role with the necessary role services(common http, asp.net, logging, tracing, management service and FTP) Enabled the management service Installed .Net Framework 4.0 via web executable Added FTP publishing to the default web site Switched default web site application pool to asp.net 4.0 (integrated) Added a 'test.aspx' file to the inetpub\wwwroot folder (contents below) Opened a browser to http://localhost/test.aspx and received a 500.0 error (also below) What am I missing? I haven't touched IIS in a while (3+ years), so it could be something stupid/trvial. Please point it out, call me a noob; my ego can take it. Thanks, Dave test.aspx <% @Page language="C# %> <html> <head> <title>Test.aspx</title> </head> <body> <asp:label runat="server" text="This is an asp.net 4.0 label" /> </body> </html> Error page: Module AspNetInitClrHostFailureModule Notification BeginRequest Handler PageHandlerFactory-Integrated-4.0 Error Code 0x80070002 Requested URL http://localhost:80/test.aspx Physical Path C:\inetpub\wwwroot\test.aspx Logon Method Not yet determined Logon User Not yet determined Trace: And in my trace file I get: 96. view trace Warning -SET_RESPONSE_ERROR_DESCRIPTION ErrorDescription An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur. 97. view trace Warning -MODULE_SET_RESPONSE_ERROR_STATUS ModuleName AspNetInitClrHostFailureModule Notification 1 HttpStatus 500 HttpReason Internal Server Error HttpSubStatus 0 ErrorCode 2147942402 ConfigExceptionInfo Notification BEGIN_REQUEST ErrorCode The system cannot find the file specified. (0x80070002) The application error log shows: Log Name: Application Source: Microsoft-Windows-IIS-W3SVC-WP Date: 5/28/2010 2:08:10 PM Event ID: 2299 Task Category: None Level: Error Keywords: Classic User: N/A Computer: win-ltfkdo1dnfp Description: An application has reported as being unhealthy. The worker process will now request a recycle. Reason given: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur. The data is the error. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" /> <EventID Qualifiers="49152">2299</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-05-28T21:08:10.000000000Z" /> <EventRecordID>1663</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>Application</Channel> <Computer>win-ltfkdo1dnfp</Computer> <Security /> </System> <EventData> <Data Name="Reason">An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur. </Data> <Binary>02000780</Binary> </EventData> </Event>

    Read the article

  • Problems connecting to WCF Service via NetNamedPipeBinding

    - by John
    I'm having trouble figuring out how to get a named pipe WCF service to work. The service is in a seperate assembly from the executable. The config looks like this: <system.serviceModel> <bindings> <netNamedPipeBinding> <binding name="NoSecurityIPC"> <security mode="None" /> </binding> </netNamedPipeBinding> </bindings> <client> <endpoint name="internal" address="channel1" binding="netNamedPipeBinding" bindingConfiguration="NoSecurityIPC" contract="conplement.TimeService.ICpTimeService" /> </client> <services> <service name="cpTimeService"> <host> <baseAddresses> <add baseAddress="net.pipe://localhost/" /> </baseAddresses> </host> <endpoint address="channel1" binding="netNamedPipeBinding" bindingConfiguration="NoSecurityIPC" contract="conplement.TimeService.ICpTimeService" /> </service> </services> </system.serviceModel> I'm using a ChannelFactory to create a proxy to access the service host: ServiceHost h = new ServiceHost(typeof(TimeService), new Uri("net.pipe://localhost/")); h.AddServiceEndpoint(typeof(ITimeService), new NetNamedPipeBinding("NoSecurityIPC"), "net.pipe://localhost/"); h.Open(); ChannelFactory<ITimeService> factory = new ChannelFactory<ITimeService>("channel1", new EndpointAddress(new Uri("net.pipe://localhost/"))); ICpTimeService proxy = factory.CreateChannel(); using (proxy as IDisposable) { this.ds = proxy.LoadData(); } I'm not sure what I'm doing wrong when I create the ChannelFactory. It can't seem to find the "channel1" in the config. When I create my binding manually and pass it to the ChannelFactory constructor, the factory and the proxy are created but the call to the LoadData() fails (times out). Can anyone see what I'm doing wrong here?

    Read the article

  • How to use Bouncy Castle lightweight API with AES and PBE

    - by Adrian
    I have a block of ciphertext that was created using the JCE algorithim "PBEWithSHA256And256BitAES-CBC-BC". The provider is BouncyCastle. What I'd like to do it decrypt this ciphertext using the BouncyCastle lightweight API. I don't want to use JCE because that requires installing the Unlimited Strength Jurisdiction Policy Files. Documentation seems to be thin on the ground when it comes to using BC with PBE and AES. Here's what I have so far. The decryption code runs without exception but returns rubbish. The encryption code, String password = "qwerty"; String plainText = "hello world"; byte[] salt = generateSalt(); byte[] cipherText = encrypt(plainText, password.toCharArray(), salt); private static byte[] generateSalt() throws NoSuchAlgorithmException { byte salt[] = new byte[8]; SecureRandom saltGen = SecureRandom.getInstance("SHA1PRNG"); saltGen.nextBytes(salt); return salt; } private static byte[] encrypt(String plainText, char[] password, byte[] salt) throws NoSuchAlgorithmException, InvalidKeySpecException, NoSuchPaddingException, InvalidKeyException, InvalidAlgorithmParameterException, IllegalBlockSizeException, BadPaddingException { Security.addProvider(new BouncyCastleProvider()); PBEParameterSpec pbeParamSpec = new PBEParameterSpec(salt, 20); PBEKeySpec pbeKeySpec = new PBEKeySpec(password); SecretKeyFactory keyFac = SecretKeyFactory.getInstance("PBEWithSHA256And256BitAES-CBC-BC"); SecretKey pbeKey = keyFac.generateSecret(pbeKeySpec); Cipher encryptionCipher = Cipher.getInstance("PBEWithSHA256And256BitAES-CBC-BC"); encryptionCipher.init(Cipher.ENCRYPT_MODE, pbeKey, pbeParamSpec); return encryptionCipher.doFinal(plainText.getBytes()); } The decryption code, byte[] decryptedText = decrypt(cipherText, password.getBytes(), salt); private static byte[] decrypt(byte[] cipherText, byte[] password, byte[] salt) throws DataLengthException, IllegalStateException, InvalidCipherTextException, InvalidKeyException, NoSuchAlgorithmException, NoSuchPaddingException, IllegalBlockSizeException, BadPaddingException { BlockCipher engine = new AESEngine(); CBCBlockCipher cipher = new CBCBlockCipher(engine); PKCS5S1ParametersGenerator keyGenerator = new PKCS5S1ParametersGenerator(new SHA256Digest()); keyGenerator.init(password, salt, 20); CipherParameters keyParams = keyGenerator.generateDerivedParameters(256); cipher.init(false, keyParams); byte[] decryptedBytes = new byte[cipherText.length]; int numBytesCopied = cipher.processBlock(cipherText, 0, decryptedBytes, 0); return decryptedBytes; }

    Read the article

  • Windows Azure : Server Error , 404 - File or directory not found.

    - by veda
    I want to upload some files of size 35MB on to the blob container. I have coded for splitting the data into blocks and upload it on to the blob container and form a blob using PUT. I tested the code for some files of Size 2MB or something... It worked well. But When I tried it for a large MB file, its giving me this error Server Error 404 - File or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable. when I tried it for files of size 6MB, it gives me this error.. Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off". <!-- Web.Config Configuration File --> <configuration> <system.web> <customErrors mode="Off"/> </system.web> </configuration> Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL. <!-- Web.Config Configuration File --> <configuration> <system.web> <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/> </system.web> </configuration> Can anyone tell me, How to solve this...

    Read the article

  • javamail:username password not accepted

    - by bobby
    i get this error when i try to send a mail using javamail api,im sure that the code is correct and username and password are 100% correct,and the gmail account which im connecting is an older account(bcoz they say it takes time for it to work with new account) DEBUG SMTP RCVD: 535-5.7.1 Username and Password not accepted. Learn more at 535 5.7.1 http://mail.google.com/support/bin/answer.py?answer=14257 x35sm3011668 wfh.6 javax.mail.SendFailedException: Sending failed; nested exception is: javax.mail.AuthenticationFailedException at javax.mail.Transport.send0(Transport.java:218) at javax.mail.Transport.send(Transport.java:80) at Main.(Main.java:41) at Main.main(Main.java:51) and this is my code: import javax.mail.*; import javax.mail.internet.*; import java.util.*; public class Main { String d_email = "[email protected]", d_password = "pass", d_host = "smtp.gmail.com", d_port = "465", m_to = "[email protected]", m_subject = "Testing", m_text = "testing email."; public Main() { Properties props = new Properties(); props.put("mail.smtp.user", d_email); props.put("mail.smtp.host", d_host); props.put("mail.smtp.port", d_port); props.put("mail.smtp.starttls.enable","true"); props.put("mail.smtp.auth", "true"); props.put("mail.smtp.debug", "true"); props.put("mail.smtp.socketFactory.port", d_port); props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory"); props.put("mail.smtp.socketFactory.fallback", "false"); SecurityManager security = System.getSecurityManager(); try { Authenticator auth = new SMTPAuthenticator(); Session session = Session.getInstance(props, auth); session.setDebug(true); MimeMessage msg = new MimeMessage(session); msg.setText(m_text); msg.setSubject(m_subject); msg.setFrom(new InternetAddress(d_email)); msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to)); Transport.send(msg); } catch (Exception mex) { mex.printStackTrace(); } } public static void main(String[] args) { Main blah = new Main(); } private class SMTPAuthenticator extends javax.mail.Authenticator { public PasswordAuthentication getPasswordAuthentication() { return new PasswordAuthentication(d_email, d_password); } } }

    Read the article

  • GoogleAppEngine : possible to disable FileUpload?

    - by James.Elsey
    Hi, When I deploy my application to GoogleAppEngine I keep getting the following error Uncaught exception from servlet java.lang.NoClassDefFoundError: java.io.FileOutputStream is a restricted class. Please see the Google App Engine developer's guide for more details. at com.google.apphosting.runtime.security.shared.stub.java.io.FileOutputStream.<clinit>(FileOutputStream.java) at org.apache.log4j.FileAppender.setFile(FileAppender.java:289) at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:163) at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:256) at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:132) at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:96) at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:654) at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:612) at org.apache.log4j.PropertyConfigurator.configureRootCategory(PropertyConfigurator.java:509) at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:415) at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:441) at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConverter.java:468) at org.apache.log4j.LogManager.<clinit>(LogManager.java:122) at org.slf4j.impl.Log4jLoggerFactory.getLogger(Log4jLoggerFactory.java:73) at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:88) at org.apache.commons.logging.impl.SLF4JLogFactory.getInstance(SLF4JLogFactory.java:155) at org.apache.commons.logging.impl.SLF4JLogFactory.getInstance(SLF4JLogFactory.java:131) at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:685) at org.springframework.web.context.ContextLoader.<clinit>(ContextLoader.java:146) at org.springframework.web.context.ContextLoaderListener.createContextLoader(ContextLoaderListener.java:53) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:44) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:548) at org.mortbay.jetty.servlet.Context.startContext(Context.java:136) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1250) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:467) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.createHandler(AppVersionHandlerMap.java:191) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.getHandler(AppVersionHandlerMap.java:168) at com.google.apphosting.runtime.jetty.JettyServletEngineAdapter.serviceRequest(JettyServletEngineAdapter.java:123) at com.google.apphosting.runtime.JavaRuntime.handleRequest(JavaRuntime.java:243) at com.google.apphosting.base.RuntimePb$EvaluationRuntime$6.handleBlockingRequest(RuntimePb.java:5485) at com.google.apphosting.base.RuntimePb$EvaluationRuntime$6.handleBlockingRequest(RuntimePb.java:5483) at com.google.net.rpc.impl.BlockingApplicationHandler.handleRequest(BlockingApplicationHandler.java:24) at com.google.net.rpc.impl.RpcUtil.runRpcInApplication(RpcUtil.java:398) at com.google.net.rpc.impl.Server$2.run(Server.java:852) at com.google.tracing.LocalTraceSpanRunnable.run(LocalTraceSpanRunnable.java:56) at com.google.tracing.LocalTraceSpanBuilder.internalContinueSpan(LocalTraceSpanBuilder.java:536) at com.google.net.rpc.impl.Server.startRpc(Server.java:807) at com.google.net.rpc.impl.Server.processRequest(Server.java:369) at com.google.net.rpc.impl.ServerConnection.messageReceived(ServerConnection.java:442) at com.google.net.rpc.impl.RpcConnection.parseMessages(RpcConnection.java:319) at com.google.net.rpc.impl.RpcConnection.dataReceived(RpcConnection.java:290) at com.google.net.async.Connection.handleReadEvent(Connection.java:474) at com.google.net.async.EventDispatcher.processNetworkEvents(EventDispatcher.java:831) at com.google.net.async.EventDispatcher.internalLoop(EventDispatcher.java:207) at com.google.net.async.EventDispatcher.loop(EventDispatcher.java:103) at com.google.net.rpc.RpcService.runUntilServerShutdown(RpcService.java:251) at com.google.apphosting.runtime.JavaRuntime$RpcRunnable.run(JavaRuntime.java:404) at java.lang.Thread.run(Unknown Source) I've checked the documentation and it suggests to create a FileUpload class, since I won't be uploading files/documents etc from my application, is this necessary? Is there a way to disable this functionality, or at least bypass this error? I have already provided implementation for a MultipartWrapperFactory.Class as that has been suggested from searching for this error Thanks

    Read the article

  • Single Sign On for a Web App

    - by Jeremy Goodell
    I have been trying to understand how this problem is solved for over a month now. I really need to come up with a general approach that works -- I'm basically the only resource who can do it. I have a theory, but I'm just not sure it's the easiest (or correct) approach and I haven't been able to find any information to support my ideas. Here's the scenario: 1) You have a complex web application that offers secure content on a subscription basis. 2) Users are required to log in to your application with user name and password. 3) You sell to large corporations, which already have a corporate authentication technology (for example, Active Directory). 4) You would like to integrate with the corporate authentication mechanism to allow their users to log onto your Web App without having to enter their user name and password. Now, any solution you come up with will have to provide a mechanism for: adding new users removing users changing user information allowing users to log in Ideally, all these would happen "automagically" when the corporate customer made the corresponding changes to their own authentication. Now, I have a theory that the way to do this (at least for Active Directory) would be for me to write a client-side app that integrates with the customer's Active Directory to track the targeted changes, and then communicate those changes to my Web App. I think that if this communication were done via Web Services offered by my web app, then it would maintain an unhackable level of security, which would obviously be a requirement for these corporate customers. I've found some information about a Microsoft product called Active Directory Federation Service (ADFS) which may or may not be the right approach for me. It seems to be a bit bulky and have some requirements that might not work for all customers. For other existing ID scenarios (like Athens and Shibboleth), I don't think a client application is necessary. It's probably just a matter of tying into the existing ID services. I would appreciate any advice anyone has on anything I've mentioned here. In particular, if you can tell me if my theory is correct about providing a client-side app that communicates with server-side Web Services, or if I'm totally going in the wrong direction. Also, if you could point me at any web sites or articles that explain how to do this, I'd really appreciate it. My research has not turned up much so far. Finally, if you could let me know of any Web applications that currently offer this service (particularly as tied to a corporate Active Directory), I would be very grateful. I am wondering if other B2B Web app's like salesforce.com, or hoovers.com offer a similar service for their corporate customers. I hate being in the dark and would greatly appreciate any light you can shed ... Jeremy

    Read the article

  • SAXException: bad envelope tag

    - by David Guzman
    I'm trying to connect to a webservice https protected through a webservice client. Eclipse generated a stub based webservice client and looks nice to me. The problem comes when I try to call a method from the webservice: String a = (String)webservice.userProfileServices(xml); I'm also using the following SOAP headers: esgGatewayPort = (new EsgGatewayLocator()).getesgGatewayPort(); //setting the authentication header PrefixedQName name = new PrefixedQName("http://schemas.xmlsoap.org/ws/2002/07/secext","Security","wsse"); System.out.println("Setting headers for authentication"); org.apache.axis.message.SOAPHeaderElement sh = new org.apache.axis.message.SOAPHeaderElement(name); SOAPElement sub; try { String clntUserName="myUser"; String clntPassword="myPassword"; sub = sh.addChildElement("UsernameToken"); SOAPElement element = sub.addChildElement("Username"); element.addTextNode(clntUserName); element = sub.addChildElement("Password"); element.addTextNode(clntPassword); ((org.apache.axis.client.Stub) esgGatewayPort).setHeader(sh); } catch (SOAPException e) { e.printStackTrace(); } I receive the following: AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException faultSubcode: faultString: org.xml.sax.SAXException: Bad envelope tag: HTML faultActor: faultNode: faultDetail: {http://xml.apache.org/axis/}stackTrace:org.xml.sax.SAXException: Bad envelope tag: HTML at org.apache.axis.message.EnvelopeBuilder.startElement(EnvelopeBuilder.java:71) at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java:1048) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDriver.scanRootElementHook(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source) at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source) at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:133) at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:153) at javax.xml.parsers.SAXParser.parse(Unknown Source) at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227) at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696) at org.apache.axis.Message.getSOAPEnvelope(Message.java:435) at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:796) at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:144) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165) at org.apache.axis.client.Call.invokeEngine(Call.java:2784) at org.apache.axis.client.Call.invoke(Call.java:2767) at org.apache.axis.client.Call.invoke(Call.java:2443) at org.apache.axis.client.Call.invoke(Call.java:2366) at org.apache.axis.client.Call.invoke(Call.java:1812) Any help will be truly appreciated David

    Read the article

  • ISA 2006 refuses VPN DHCP requests as spoofing

    - by Daniel
    I'm running ISA 2006 with PPTP VPN for my AD-controlled network. DHCP is located on the ISA server itself and authentication is done by RADIUS (NPS) located on the DC. Right now my VPN clients can connect, access local DNS, and can ping ISA, the DC, and other clients. Here's where it gets weird. I noticed that despite all this, ipconfig shows the following: PPP adapter North Horizon VPN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : North Horizon VPN Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.42.4.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 DNS Servers . . . . . . . . . . . : 10.42.1.10 NetBIOS over Tcpip. . . . . . . . : Enabled So I went over and checked my ISA logs for both DHCP requests and replies, only to find out that my VPN clients are being denied because ISA thinks its a spoof. Here's some relevant information from the log (the VPN subnet is 10.42.4.0/24): Client IP: 10.42.4.6 Destination: 255.255.255.255:67 Client Username: (blank) Protocol: DHCP (request) Action: Denied Connection Rule: (blank) Source Network: VPN Clients Destination Network: Local Host Result Code: 0xc0040014 FWX_E_FWE_SPOOFING_PACKET_DROPPED Network Interface: 10.42.4.11 --------------------------------------------------------- Original Client IP: 10.42.4.6 Destination: 10.42.1.1 Client Username: (valid user) Protocol: PING Action: Initiated Connection Rule: Allow PING to ISA Source Network: VPN Clients Destination Network: Local Host Result Code: 0x0 ERROR_SUCCESS Network Interface: (blank) I wasn't sure what this 10.42.4.11 network interface was - it certainly wasn't something I had setup - untill I saw it in Routing and Remote Access under IP Routing General as an interface called "Internal" bound to the same IP address. I also noticed that since ISA takes blocks of 10 IP addresses from DHCP for VPN, it had reserved 10.42.4.2-11. I'm not sure if it means anything, though. Thanks for your help.

    Read the article

  • Delete Nodes + attributes that match Xpath except specific attributes

    - by Ryan Ternier
    I'm trying to find the best (efficient) way of doing this. I have a medium sized XML document. Depending on specific settings certain portions of it need to be filtered out for security reasons. I'll be doing this in XSLT as it's configurable and no code should need changing. I've looked around, but not getting much luck on it. For example: I have the following XPath: //*[@root='2.16.840.1.113883.3.51.1.1.6.1'] Whicrooth gives me all nodes with a root attribute equal to a specific OID. In these nodes I want to have all attributes except for a few (ex. foo and bar) erased, and then having another attribute added (ex. reason) I also need to have multiple XPath expressions that can be ran to zero down on a specific node and clear it's contents out in a similar fashion, with respect to nodes with specific attributes. I'm playing around with information from: XPath expression to select all XML child nodes except a specific list? and XSLT Remove Elements and/or Attributes by Name per XSL Parameters Will update shortly when I can have access what what I"ve done so far. Example: XML Before Transformation <root> <childNode> <innerChild root="2.16.840.1.113883.3.51.1.1.6.1" a="b" b="c" type="innerChildness"/> <innerChildSibling/> </childNode> <animals> <cat> <name>bob</name> </cat> </animals> <tree/> <water root="2.16.840.1.113883.3.51.1.1.6.1" z="zed" l="ell" type="liquidLIke"/> </root> After <root> <childNode> <innerChild root="2.16.840.1.113883.3.51.1.1.6.1" flavor="MSK"/> <!-- filtered --> <innerChildSibling/> </childNode> <animals> <cat flavor="MSK" /> <!-- cat was filtered --> </animals> <tree/> <water root="2.16.840.1.113883.3.51.1.1.6.1" flavor="MSK"/> <!-- filtered --> </root>

    Read the article

  • ReportBuilder.application fails on my PC - but works on localhost

    - by JayTee
    We're running SQL 2005 on Win2K3 server and are using SSRS. Here's the situation: I can run Report Builder from localhost My coworker can run Report Builder on his Vista computer Another coworker can run Report Builder on his XP SP3 computer (IE7) I can NOT run Report Builder on my XP SP3 computer (IE7) I'm told that it could be anything from an errant registry entry to a group policy problem. Here is what I've tried: Put the site into "Trusted Sites" with "low" security re-install .NET create a new local user account and attempt to run it The results? Every single time, I get a dialog box: "Application cannot be started. Contact the application vendor" I click the details button and get this: PLATFORM VERSION INFO Windows : 5.1.2600.196608 (Win32NT) Common Language Runtime : 2.0.50727.3607 System.Deployment.dll : 2.0.50727.3053 (netfxsp.050727-3000) mscorwks.dll : 2.0.50727.3607 (GDR.050727-3600) dfdll.dll : 2.0.50727.3053 (netfxsp.050727-3000) dfshim.dll : 2.0.50727.3053 (netfxsp.050727-3000) SOURCES Deployment url : http://www.example.com/ReportServer/ReportBuilder/ReportBuilder.application Server : Microsoft-IIS/6.0 X-Powered-By : ASP.NET X-AspNet-Version: 2.0.50727 IDENTITIES Deployment Identity : ReportBuilder.application, Version=9.0.3042.0, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=msil APPLICATION SUMMARY * Online only application. * Trust url parameter is set. ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Activation of http://www.example.com/ReportServer/ReportBuilder/ReportBuilder.application resulted in exception. Following failure messages were detected: + Value does not fall within the expected range. COMPONENT STORE TRANSACTION FAILURE SUMMARY No transaction error was detected. WARNINGS There were no warnings during this operation. OPERATION PROGRESS STATUS * [4/7/2010 2:53:57 PM] : Activation of http://www.example.com/ReportServer/ReportBuilder/ReportBuilder.application has started. * [4/7/2010 2:53:58 PM] : Processing of deployment manifest has successfully completed. ERROR DETAILS Following errors were detected during this operation. * [4/7/2010 2:53:58 PM] System.ArgumentException - Value does not fall within the expected range. - Source: System.Deployment - Stack trace: at System.Deployment.Application.NativeMethods.CorLaunchApplication(UInt32 hostType, String applicationFullName, Int32 manifestPathsCount, String[] manifestPaths, Int32 activationDataCount, String[] activationData, PROCESS_INFORMATION processInformation) at System.Deployment.Application.ComponentStore.ActivateApplication(DefinitionAppId appId, String activationParameter, Boolean useActivationParameter) at System.Deployment.Application.SubscriptionStore.ActivateApplication(DefinitionAppId appId, String activationParameter, Boolean useActivationParameter) at System.Deployment.Application.ApplicationActivator.Activate(DefinitionAppId appId, AssemblyManifest appManifest, String activationParameter, Boolean useActivationParameter) at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) COMPONENT STORE TRANSACTION DETAILS * Transaction at [4/7/2010 2:53:58 PM] + System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata - Status: Set - HRESULT: 0x0 + System.Deployment.Internal.Isolation.StoreTransactionOperationType (27) - HRESULT: 0x0 I'm really at a loss. I'm certain there is something on my PC preventing the application from running - but I just don't know what. Google hasn't been much of a help because most problems are related to the server configuration (which I know is correct since it works on other PCs) Help me, Overflow Kenobi, you're my only hope..

    Read the article

  • JBoss EJB Bean not bound

    - by portoalet
    Hi, I have the following error Exception in thread "main" javax.naming.NameNotFoundException: CounterBean not bound trying to access an EJB JAR CounterBean.jar deployed on JBoss5 from a client application outside the Application Server. From the Jboss log, it looks like it does not have a global JNDI name? Is this ok? What have I done wrong? JBoss log: 13:50:39,669 INFO [JBossASKernel] Created KernelDeployment for: Counter.jar 13:50:39,672 INFO [JBossASKernel] installing bean: jboss.j2ee:jar=Counter.jar,name=CounterBean,service=EJB3 13:50:39,672 INFO [JBossASKernel] with dependencies: 13:50:39,672 INFO [JBossASKernel] and demands: 13:50:39,673 INFO [JBossASKernel] partition:partitionName=DefaultPartition; Required: Described 13:50:39,673 INFO [JBossASKernel] jboss.ejb:service=EJBTimerService; Required: Described 13:50:39,673 INFO [JBossASKernel] and supplies: 13:50:39,673 INFO [JBossASKernel] jndi:CounterBean 13:50:39,673 INFO [JBossASKernel] Added bean(jboss.j2ee:jar=Counter.jar,name=CounterBean,service=EJB3) to KernelDeployment of: Counte r.jar 13:50:39,712 INFO [SessionSpecContainer] Starting jboss.j2ee:jar=Counter.jar,name=CounterBean,service=EJB3 13:50:39,727 INFO [EJBContainer] STARTED EJB: com.don.CounterBean ejbName: CounterBean 13:50:39,732 INFO [JndiSessionRegistrarBase] Binding the following Entries in Global JNDI: The client code is: public static void main(String[] args) throws NamingException, InterruptedException { InitialContext ctx = new InitialContext(); Counter s = (Counter)ctx.lookup("CounterBean/remote"); for(int i = 0; i < 100; i++ ) { s.printCount(i); Thread.sleep(1000); } } Error message: java -Djava.naming.provider.url=jnp://123.123.123.123:1099 -Djava.naming.factory.initial=org.jnp.interfaces.NamingContextFactory com.don.Client Exception in thread "main" javax.naming.NameNotFoundException: CounterBean not bound at org.jnp.server.NamingServer.getBinding(NamingServer.java:771) at org.jnp.server.NamingServer.getBinding(NamingServer.java:779) at org.jnp.server.NamingServer.getObject(NamingServer.java:785) at org.jnp.server.NamingServer.lookup(NamingServer.java:396) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:305) at sun.rmi.transport.Transport$1.run(Transport.java:159) at java.security.AccessController.doPrivileged(Native Method) at sun.rmi.transport.Transport.serviceCall(Transport.java:155) at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535) at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790) at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:619) at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255) at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233) at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:142) at org.jnp.server.NamingServer_Stub.lookup(Unknown Source) at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:726) at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:686) at javax.naming.InitialContext.lookup(InitialContext.java:392) at com.don.Client.main(Client.java:10)

    Read the article

  • Metro UsernameToken Policy

    - by Rodney
    I created a web services client prototype using api's available in weblogic 10.3. I've been told I need to use Metro 2.0 instead (it's already being used for other projects). The problem I have encounter is that the WSDL does not include any Security Policy information but a UsernameToken is required for each method call. In weblogic I was able to write my own policy xml file and instantiate my service with it (see below), however I can not seem to figure out how to do the same using Metro. Policy.xml <?xml version="1.0"?> <wsp:Policy xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200512"> <sp:SupportingTokens> <wsp:Policy> <sp:UsernameToken sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200512/IncludeToken/AlwaysToRecipient"> <wsp:Policy> <sp:WssUsernameToken10/> <sp:HashPassword/> </wsp:Policy> </sp:UsernameToken> </wsp:Policy> </sp:SupportingTokens> </wsp:Policy> Client.java (Weblogic) ClientPolicyFeature cpf = new ClientPolicyFeature(); InputStream asStream = WebServiceSoapClient.class.getResourceAsStream("Policy.xml"); cpf.setEffectivePolicy(new InputStreamPolicySource(asStream)); try { webService = new WebService(new URL("http://192.168.1.10/WebService/WebService.asmx?wsdl"), new QName("http://testme.com", "WebService")); } catch ( MalformedURLException e ) { e.printStackTrace(); } WebServiceSoap client = webService.getWebServiceSoap(new WebServiceFeature[] {cpf}); List<CredentialProvider> credProviders = new ArrayList<CredentialProvider>(); String username = "user"; String password = "pass"; CredentialProvider cp = new ClientUNTCredentialProvider(username.getBytes(), password.getBytes()); credProviders.add(cp); Map<String, Object> rc = ((BindingProvider) client).getRequestContext(); rc.put(WSSecurityContext.CREDENTIAL_PROVIDER_LIST, credProviders); ... I am able to generate my Proxy classes using Metro however I can not figure out how to configure it to send the UsernameToken. I have attempted several different examples from the web which have not worked. Any help would be appreciated.

    Read the article

  • NHibernate: No persister error

    - by Mike
    Hello, In my quest to further my knowledge, I'm trying to get get NHibernate running. I have the following structure to my solution Core Class Library Project Infrastructure Class Library Project MVC Application Project Test Project In my Core project I have created the following entity: using System; namespace Core.Domain.Model { public class Category { public virtual Guid Id { get; set; } public virtual string Name { get; set; } } } In my Infrastructure Project I have the following mapping: <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" namespace="Core.Domain.Model" assembly="Core"> <class name="Category" table="Categories" dynamic-update="true"> <cache usage="read-write"/> <id name="Id" column="Id" type="Guid"> <generator class="guid"/> </id> <property name="Name" length="100"/> </class> </hibernate-mapping> With the following config file: <hibernate-configuration xmlns="urn:nhibernate-configuration-2.2"> <session-factory> <property name="connection.driver_class">NHibernate.Driver.SqlClientDriver</property> <property name="connection.connection_string">server=xxxx;database=xxxx;Integrated Security=true;</property> <property name="show_sql">true</property> <property name="dialect">NHibernate.Dialect.MsSql2008Dialect</property> <property name="cache.use_query_cache">false</property> <property name="adonet.batch_size">100</property> <property name="proxyfactory.factory_class">NHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle</property> <mapping assembly="Infrastructure" /> </session-factory> </hibernate-configuration> In my test project, I have the following Test [TestMethod] [DeploymentItem("hibernate.cfg.xml")] public void CanCreateCategory() { IRepository<Category> repo = new CategoryRepository(); Category category = new Category(); category.Name = "ASP.NET"; repo.Save(category); } I get the following error when I try to run the test: Test method Volunteer.Tests.CategoryTests.CanCreateCategory threw exception: NHibernate.MappingException: No persister for: Core.Domain.Model.Category. Any help would be greatly appreciated. I do have the cfg build action set to embedded resource. Thanks!

    Read the article

  • Python Ctypes Read/WriteProcessMemory() - Error 5/998 Help!

    - by user299805
    Please don't get scared but the following code, if you are familiar with ctypes or C it should be easy to read. I have been trying to get my ReadProcessMemory() and WriteProcessMemory() functions to be working for so long and have tried almost every possibility but the right one. It launches the target program, returns its PID and handle just fine. But I always get a error code of 5 - ERROR_ACCESS_DENIED. When I run the read function(forget the write for now). I am launching this program as what I believe to be a CHILD process with PROCESS_ALL_ACCESS or CREATE_PRESERVE_CODE_AUTHZ_LEVEL. I have also tried PROCESS_ALL_ACCESS and PROCESS_VM_READ when I open the handle. I can also say that it is a valid memory location because I can find it on the running program with CheatEngine. As for VirtualQuery() I get an error code of 998 - ERROR_NOACCESS which further confirms my suspicion of it being some security/privilege problem. Any help or ideas would be very appreciated, again, it's my whole program so far, don't let it scare you =P. from ctypes import * from ctypes.wintypes import BOOL import binascii BYTE = c_ubyte WORD = c_ushort DWORD = c_ulong LPBYTE = POINTER(c_ubyte) LPTSTR = POINTER(c_char) HANDLE = c_void_p PVOID = c_void_p LPVOID = c_void_p UNIT_PTR = c_ulong SIZE_T = c_ulong class STARTUPINFO(Structure): _fields_ = [("cb", DWORD), ("lpReserved", LPTSTR), ("lpDesktop", LPTSTR), ("lpTitle", LPTSTR), ("dwX", DWORD), ("dwY", DWORD), ("dwXSize", DWORD), ("dwYSize", DWORD), ("dwXCountChars", DWORD), ("dwYCountChars", DWORD), ("dwFillAttribute",DWORD), ("dwFlags", DWORD), ("wShowWindow", WORD), ("cbReserved2", WORD), ("lpReserved2", LPBYTE), ("hStdInput", HANDLE), ("hStdOutput", HANDLE), ("hStdError", HANDLE),] class PROCESS_INFORMATION(Structure): _fields_ = [("hProcess", HANDLE), ("hThread", HANDLE), ("dwProcessId", DWORD), ("dwThreadId", DWORD),] class MEMORY_BASIC_INFORMATION(Structure): _fields_ = [("BaseAddress", PVOID), ("AllocationBase", PVOID), ("AllocationProtect", DWORD), ("RegionSize", SIZE_T), ("State", DWORD), ("Protect", DWORD), ("Type", DWORD),] class SECURITY_ATTRIBUTES(Structure): _fields_ = [("Length", DWORD), ("SecDescriptor", LPVOID), ("InheritHandle", BOOL)] class Main(): def __init__(self): self.h_process = None self.pid = None def launch(self, path_to_exe): CREATE_NEW_CONSOLE = 0x00000010 CREATE_PRESERVE_CODE_AUTHZ_LEVEL = 0x02000000 startupinfo = STARTUPINFO() process_information = PROCESS_INFORMATION() security_attributes = SECURITY_ATTRIBUTES() startupinfo.dwFlags = 0x1 startupinfo.wShowWindow = 0x0 startupinfo.cb = sizeof(startupinfo) security_attributes.Length = sizeof(security_attributes) security_attributes.SecDescriptior = None security_attributes.InheritHandle = True if windll.kernel32.CreateProcessA(path_to_exe, None, byref(security_attributes), byref(security_attributes), True, CREATE_PRESERVE_CODE_AUTHZ_LEVEL, None, None, byref(startupinfo), byref(process_information)): self.pid = process_information.dwProcessId print "Success: CreateProcess - ", path_to_exe else: print "Failed: Create Process - Error code: ", windll.kernel32.GetLastError() def get_handle(self, pid): PROCESS_ALL_ACCESS = 0x001F0FFF PROCESS_VM_READ = 0x0010 self.h_process = windll.kernel32.OpenProcess(PROCESS_VM_READ, False, pid) if self.h_process: print "Success: Got Handle - PID:", self.pid else: print "Failed: Get Handle - Error code: ", windll.kernel32.GetLastError() windll.kernel32.SetLastError(10000) def read_memory(self, address): buffer = c_char_p("The data goes here") bufferSize = len(buffer.value) bytesRead = c_ulong(0) if windll.kernel32.ReadProcessMemory(self.h_process, address, buffer, bufferSize, byref(bytesRead)): print "Success: Read Memory - ", buffer.value else: print "Failed: Read Memory - Error Code: ", windll.kernel32.GetLastError() windll.kernel32.CloseHandle(self.h_process) windll.kernel32.SetLastError(10000) def write_memory(self, address, data): count = c_ulong(0) length = len(data) c_data = c_char_p(data[count.value:]) null = c_int(0) if not windll.kernel32.WriteProcessMemory(self.h_process, address, c_data, length, byref(count)): print "Failed: Write Memory - Error Code: ", windll.kernel32.GetLastError() windll.kernel32.SetLastError(10000) else: return False def virtual_query(self, address): basic_memory_info = MEMORY_BASIC_INFORMATION() windll.kernel32.SetLastError(10000) result = windll.kernel32.VirtualQuery(address, byref(basic_memory_info), byref(basic_memory_info)) if result: return True else: print "Failed: Virtual Query - Error Code: ", windll.kernel32.GetLastError() main = Main() address = None main.launch("C:\Program Files\ProgramFolder\Program.exe") main.get_handle(main.pid) #main.write_memory(address, "\x61") while 1: print '1 to enter an address' print '2 to virtual query address' print '3 to read address' choice = raw_input('Choice: ') if choice == '1': address = raw_input('Enter and address: ') if choice == '2': main.virtual_query(address) if choice == '3': main.read_memory(address) Thanks!

    Read the article

< Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >