Search Results

Search found 19765 results on 791 pages for 'product lifecycle management'.

Page 600/791 | < Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >

• Wifi doesn't connect if I'm upstairs

  - by user11233

  Hello there, I'm finding that Wifi connects when I'm in the living room, where the internet router etc is. But if I try to connect upstairs it is a no go. Booting in Windows 7 (dual boot :D ) I find that Wifi connects. I find this very confusing and have it since the install. Please help! Kind regards. #sudo lshw -c network *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:21:5d:1a:63:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-26-generic firmware=8.24.2.12 ip=10.0.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:49 memory:de200000-de201fff Hope it helps! Hello guys, just tried to connect internet upstairs and to my surprise it does connect. Don't know exactly why. Only thing I've done recently is input the codes said bij Oli. Two things I've done on my own 1: installed Jupiter and 2: installed laptop-mode-tools. I really don't know if this can effect my internet but it's the only thing I can think of. Thanks for all the help, really appreciate it :) PS If someone thinks it might be helpful for others I would like to help find a 'real' solution to this problem. Just post down what I need to post here and I will try my best to help.

  Read the article

• A key principle of Scrum...

  - by AndyScott

  "A key principle of Scrum is its recognition that during a project the customers can change their minds about what they want and need (often called requirements churn), and that unpredicted challenges cannot be easily addressed in a traditional predictive or planned manner. As such, Scrum adopts an empirical approach—accepting that the problem cannot be fully understood or defined, focusing instead on maximizing the team’s ability to deliver quickly and respond to emerging requirements." I have been working in a SCRUM environment, with 4-6 week cycles, for about 6 months now and have been very pleased with the impact that it has had on my life (regular work hours, seeing my family, etc).  But was looking up the criteria for a 'Certified Scrum Master' and came across the SCRUM definition on Wikipedia, and started reading the actual definition.  My first thought was "hey, this development methodology actually allows you to deal with what happens in the real world (i.e. customers changing requirements); but is this "selling out" on solid requirements? I understand that this works in the environment that I am currently working in, where there are deep pockets paying the bills, and also making the descisions on what requirements to change / impliment; but is this a recepie for success in smaller or simply more budget concious environments?  Having the ability to be completely flexible when the client wants the product changed.   The more I think about it, the more I feel that SCRUM development may be better suited for an environment where a team is taking over a project from another team (bringing some outside development in-house or something of that ilk), as opposed to ground up development. What do you think?

  Read the article

• How to implement Restricted access to application features

  - by DroidUser

  I'm currently developing a web application, that provides some 'service' to the user. The user will have to select a 'plan' according to which she/he will be allowed to perform application specific actions but up to a limit defined by the plan. A Plan will also limit access to certain features, which will not be available at all for some plans. As an example : say there are 3 plans, 2 actions throughout the application users in plan-1 can perform action-1 3 times, and they can't perform action-2 at all users in plan-2 can perform action-1 10 times, action-2 5 times users in plan-3 can perform action-1 20 times, action-2 10 times So i'm looking for the best way to get this done, and my main concerns besides implementing it, are the following(in no particular order) maintainability/changeability : the number of plans, and type of features/actions will change in the final product industry standard/best practice : for future readiness!! efficiency : ofcourse, i want fast code!! I have never done anything like this before, so i have no clue about how do i go about implementing these functionalities. Any tips/guides/patterns/resources/examples? I did read a little about ACL, RBAC, are they the patterns that i need to follow? Really any sort of feedback will help.

  Read the article

• Build vs Buy Webcast: November 8, 2012

  - by TammyBednar

  Date: Thursday, November 8, 2012, 1:00 PM EST You have a choice. Do you build your own database platform or buy a pre-engineered database appliance? Building a high-availability database platform presents unique challenges. Combining servers, storage, networking, OS, firmware, and database is complicated and raises important concerns: Will coordination between multiple SME’s delay deployment? Will it be reliable? Will it scale? Will routine maintenance consume precious IT-staff time? Ultimately, will it work? Enter the Oracle Database Appliance, a complete package of software, server, storage, and networking that’s engineered for simplicity. It saves time and money by simplifying deployment, maintenance, and support of database workloads. Plus, it’s based on Intel Xeon processors to ensure a high level of performance and scalability. Attend this Webcast to hear customer stories and discover how the Oracle Database Appliance: Increases ROI by reducing capital and operational expenses Frees IT staff by reducing deployment and management time from weeks to hours Takes the worry out of supporting mission critical application workloads Register For this WebCast today!

  Read the article

• Why job postings always looking for "rockstars?" [closed]

  - by Xepoch

  I have noticed a recent trend in requesting programmers who are rockstars. I get it, they're looking for someone who is really good at what they do. But why (pray) make the reference to a rockstar? Do these companies really want these traits as a real rockstar? Party all night and wake up to take care of quick business in the morning? Substance abuse, Narcissism with celebrity, Compensation well exceeding their management, Excellent at putting on a short-lived show, Entertainment instead of value, 1 hit (project) wonders or single-genre performers, Et cetera What is wrong with Senior or Principal Software Engineer who has an established and proven passion for the business? Rather do we mean quite the opposite, someone who: rolls up the sleeves and gets to work, takes appropriate direction and helps influence teams, programs in lessons' learned and proper practices, provides timely communication to the whole team, can code and understand multiple languages, understands the science and theory behind computation, Is there a trend to diversify the software engineering ranks? How many software rockstars can you hire before your band starts breaking up? Sure, there are lots of folks doing this stuff on their own, maybe even a rare few who do coding for show, but I wager the majority is for business. I don't see ads for rockstar accountants, or rockstar machinists, or rockstart CFOs. What makes the software programmer and their hiring departments lean towards this kind of job title?

  Read the article

• Single CAS web application in a cluster

  - by Dolf Dijkstra

  Recently a customer wanted to set up a cluster of CAS nodes to be used together with WebCenter Sites. In the process of setting this up they realized that they needed to create a web application per managed server. They did not want to have this management burden but would like to have one web application deployed to multiple nodes. The reason that there is a need for a unique application per node is that the web-application contains information that needs to be unique per node, the postfix for the ticket id.  My customer would like to externalize the node specific configuration to either a specific classpath per managed server or to system properties set at startup.It turns out that the postfix for ticket ids is managed through a property host.name and that this property can be externalized.The host.name property is used in: /webapps/cas/WEB-INF/spring-configuration/uniqueIdGenerators.xmlIt is set in /webapps/cas/WEB-INF/spring-configuration/propertyFileConfigurer.xmlin a PropertyPlaceholderConfigurer.The documentation for PropertyPlaceholderConfigurer:http://static.springsource.org/spring/docs/2.0.x/api/org/springframework/beans/factory/config/PropertyPlaceholderConfigurer.htmlThis indicates that the properties defined through the PropertyPlaceHolderConfigurer can be externalized.To enable this externalization you would need to change host.properties so it is generic for all the managed servers and thus can be reused for all the managed servers: host.name=${cluster.node.id}Next step is to change the startup scripts for the managed servers and add a system property for -Dcluster.node.id=<something unique and stable>.Viola, the postfix is externalized and the web application can be shared amongst the cluster nodes.

  Read the article

• If I want to dual-boot Ubuntu with another OS, what partitioning method should I use?

  - by Jay

  I have Ubuntu running as a vm in VirtualBox at the moment, but in the future, if I want to dual-boot it with Windows or another OS installed on my hard-drive, what partitioning method should I use to make room for it? 1)Manually partition my hard drive via disk management in Windows (or the equivalent in another OS), making appropriate room for the main partition upon which Ubuntu will be installed and swap space; 2)Partition via the Ubuntu installer options; 3)Use gparted or another free tool like it. I am uncertain as to why I would want to use one over the other. Lastly, am I correct to think that it would be the acme of foolishness to try to partition drives within a virtual machine (since that partitioning would be inherently limited to the limitations set upon it by the virtualization software, e.g., VirtualBox)? Thanks! P.S. Oh, and I am also planning on not modifying the MBR of Windows if I ever do dual-boot with Ubuntu, using instead a piece of free software (like easyBCD or something) to avoid the headaches of Grub being overwritten by a Windows update.

  Read the article

• CMS and Databases vs. DIY

  - by hozza

  I have been programming for many years now, primarily in PHP and the like and would consider myself an intermediate programmer. Some of my online projects have now gone global and very widely used, i am now in deep thought about scalability etc. All of my systems so far are written in PHP, no known database structure such as MySQL etc. Instead our databases use an 'operating system style' method of storing information, files and folders if you will. We also do not use any outside/third-party software or CMS, so far this has work out extremely well. Most people, when they hear about the way we do things, criticize and say that is an idiotic idea but normally after seeing our systems in more dept are converted to our way of doing things. Is it really that bad to not use a standard databasing systems and only using the one (slightly heavier than others) language of PHP? How well on the face of it will this kind of setup scale? N.B. Our systems include things such as account and user management, documentation development and task/project managing.

  Read the article

• Planning and Budgeting Cloud Service - Partner Webcast

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Please join us for a 90 minutes live Partner Webcast which will overview the upcoming Oracle Planning and Budgeting Cloud Service (PBCS) offering on Tuesday, 26th November, 2013 at 5:00 pm CET / 4:00 pm UK. Look out for the joining URL and instruction in my November Newsletter coming soon. As a reminder, there was also a Partner Webcast recorded in August 2103 about PBCS which included a demo. Replay link here. Topics include: Latest news from Product Management; live demo; overview of assets and collaterals; Q&A session Oracle Planning and Budgeting Cloud Service (PBCS) offers organizations the market-leading Oracle Hyperion Planning and Budgeting solution delivered via Oracle’s public cloud service. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• is Java free for mobile development?

  - by exTrace101

  Q1. I would like to know if it's free for a developer (I mean, if I have to pay no royalties to Sun/Oracle) to develop (Android) mobile apps in Java? After reading this snippet about use of Java field, I'm getting the impression that Java is not free for mobile development, is that right? .."General Purpose Desktop Computers and Servers" means computers, including desktop and laptop computers, or servers, used for general computing functions under end user control (such as but not specifically limited to email, general purpose Internet browsing, and office suite productivity tools). The use of Software in systems and solutions that provide dedicated functionality (other than as mentioned above) or designed for use in embedded or function-specific software applications, for example but not limited to: Software embedded in or bundled with industrial control systems, wireless mobile telephones, wireless handheld devices, netbooks, kiosks, TV/STB, Blu-ray Disc devices, telematics and network control switching equipment, printers and storage management systems, and other related systems are excluded from this definition and not licensed under this Agreement... and from http://www.excelsiorjet.com/embedded/ Notice : The Java SE Embedded technology license currently prohibits the use of Java SE in cell phones. Q2. how come these plethora of Android Java developers aren't paying Sun/Oracle a dime?

  Read the article

• Get the Latest Security Inside Out Newsletter, October Edition

  - by Troy Kitch

  The latest October edition of the Security Inside Out newsletter is now available and covers the following important security news: Securing Oracle Database 12c: A Technical Primer The new multitenant architecture of Oracle Database 12c calls for adopting an updated approach to database security. In response, Oracle security experts have written a new book that is expected to become a key resource for database administrators. Find out how to get a complimentary copy.  Read More HIPAA Omnibus Rule Is in Effect: Are You Ready? On September 23, 2013, the HIPAA Omnibus Rule went into full effect. To help Oracle’s healthcare customers ready their organizations for the new requirements, law firm Ballard Spahr LLP and the Oracle Security team hosted a webcast titled “Addressing the Final HIPAA Omnibus Rule and Securing Protected Health Information.” Find out three key changes affecting Oracle customers.  Read More The Internet of Things: A New Identity Management Paradigm By 2020, it’s predicted there will be 50 billion devices wirelessly connected to the internet, from consumer products to highly complex industrial and manufacturing equipment and processes. Find out the key challenges of protecting identity and data for the new paradigm called the Internet of Things.  Read More

  Read the article

• Inventory Consignment Flow

  - by ipohfly

  Not sure whether this is the right place to ask this question, but here goes.. Currently I have requirement to add support for consignment transaction in our inventory module. I have a very limited understanding of what consignment means in inventory, i.e. Customer get stocks/products from Seller without actually buying them, the product just resides in the Customer's inventory and it's still owned by the Seller. Only when the Customer actually buy the stocks then only will the ownership of the stock is transferred. The issue is i can't imagine how the data will be presented to both the Customer and the Seller. What i know is that i would need to deduct the stock from the Seller's inventory when the Customer raise a request to get the stock through consignment, but what about the 'ownership' of the stocks/products? Does that mean i would need to create another column in my table to state that for each inventory it is owned by who? Anywhere i can get information on how i should work out an inventory module like this? Thanks.

  Read the article

• How do I stop video tearing? (Nvidia prop driver, non-compositing window manager)

  - by Chan-Ho Suh

  I have that problem which seemingly afflicts many using the proprietary Nvidia driver: Video tearing: fine horizontal lines (usually near the top of my display) when there is a lot of panning or action in the video. (Note: switching back to the default nouveau driver is not an option, as its seemingly nonexistent power-management drains my battery several times faster) I've tried Totem, Parole, and VLC, and tearing occurs with all of them. The best result has been to use X11 output in VLC, but there is still tearing with relatively moderate action. Hardware: MacBook Air 3,2 -- which has an Nvidia GeForce 320M. There are two common fixes for tearing with Nvidia prop drivers: Turn off compositing, since Nvidia proprietary drivers don't usually play nice with compositing window managers on Linux (Compiz is an exception I'm aware of). But I use an extremely lightweight window manager (Awesome window manager) which is not even capable of compositing (or any cool effects). I also have this problem in Xfce, where I have compositing disabled. Enabling sync to VBlank. To enable this, I set the option in nvidia-settings and then autostart it as nvidia-settings -l with my other autostart programs. This seems to work, because when I run glxgears, I get: $ glxgears Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. 303 frames in 5.0 seconds = 60.500 FPS 300 frames in 5.0 seconds = 59.992 FPS And when I check the refresh rate using nvidia-settings: $ nvidia-settings -q RefreshRate Attribute 'RefreshRate' (wampum:0.0; display device: DFP-2): 60.00 Hz. All this suggests sync to VBlank is enabled. As I understand it, this is precisely designed to stop tearing, and a lot of people's problem is even getting something like glxgears to output the correct info. I don't understand why it's not working for me. xorg.conf: http://paste.ubuntu.com/992056/ Example of observed tearing::

  Read the article

• How can my team avoid frequent errors after refactoring?

  - by SDD64

  to give you a little background: I work for a company with roughly twelve Ruby on Rails developers (+/- interns). Remote work is common. Our product is made out of two parts: a rather fat core, and thin up to big customer projects built upon it. Customer projects usually expand the core. Overwriting of key features does not happen. I might add that the core has some rather bad parts that are in urgent need of refactorings. There are specs, but mostly for the customer projects. The worst part of the core are untested (as it should be...). The developers are split into two teams, working with one or two PO for each sprint. Usually, one customer project is strictly associated with one of the teams and POs. Now our problem: Rather frequently, we break each others stuff. Some one from Team A expands or refactors the core feature Y, causing unexpected errors for one of Team B's customer projects. Mostly, the changes are not announced over the teams, so the bugs hit almost always unexpected. Team B, including the PO, thought about feature Y to be stable and did not test it before releasing, unaware of the changes. How to get rid of those problems? What kind of 'announcement technique' can you recommend me?

  Read the article

• Advice and resources on collaborative environments

  - by Tjaart

  I need some advice on collaborative software environments. More specifically, I am looking for books and reference materials that can aid me in understanding team and code structures and the interactions thereof. In other words books, blogs or white papers explaining: Different strategies for structuring teams that share common code between each other but have distinct individual functions? To summarise my question I would like to know what would be a good source of knowledge if I were to set up teams in an organisation that shared code but each unit still remained autonomous. I have done some research on this subject and explored: code review tools, distributed VCS, continuous integration tools, Unit testing automation. The tough part about implementing these tools are to determine where a good place would be to start, which tools are low hanging fruit, which tools or methods provide higher success rates. If someone asks me about code quality reference I point them to Code Complete. I am looking for an equivalent guide on software team structures and tools to make this equation work better. I realise that this question is quite vague but it arose as "we need to share code between teams without breaking each others stuff and causing management headaches and reams of red tape" The answer is definitely not simple and requires changes on many levels, hence the question. If the question is too vague please vote to close or delete. I would accept any good starting point as an answer.

  Read the article

• Never Bet Against the Impossible

  - by BuckWoody

  My uncle used to say “If a man tells you that his car squirts milk in his eye when you lift the hood, don’t bet against that. You’ll end up with milk in your eye.” My friend Allen White tells me this is taken from a play (and was said about playing cards), but I think the sentiment holds, even in database work. I mentioned the other day that you should allow the other person to talk and actively listen before you propose a solution. Well, I saw a consultant “bet against the impossible”  the other day – and it bit her. She explained to the person telling her the problem that the situation simply couldn’t exist that way, and he proceeded to show her that it did. She got silent, typed a few things, muttered a little, and then said “well, must be something else.” She just couldn’t admit she was wrong. So don’t go there. If someone explains a problem to you with their database, listen with purpose, and then explore the troubleshooting steps you know to find the problem. But keep your absolutes to yourself. In fact, I have a friend that has recently sent me one of those. He connects to a system with SQL Server Management Studio (SSMS) version 2008 (if I recall correctly) and it shows a certain version number of the target system in the connection tab. Then he connects to it using SSMS 2008 R2 and gets a different number. Now, as far as I know, we didn’t change the connection string information, and that’s provided by the target system, so this is impossible. But I won’t tell him that. Not until I look a little more. :) Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• More Tables or More Databases?

  - by BuckWoody

  I got an e-mail from someone that has an interesting situation. He has 15,000 customers, and he asks if he should have a database for their data per customer. Without a LOT more data it’s impossible to say, of course, but there are some general concepts to keep in mind. Whenever you’re segmenting data, it’s all about boundary choices. You have not only boundaries around how big the data will get, but things like how many objects (tables, stored procedures and so on) that will be involved, if there are any cross-sections of data (do they share location or product information) and – very important – what are the security requirements? From the answer to these types of questions, you now have the choice of making multiple tables in a single database, or using multiple databases. A database carries some overhead – it needs a certain amount of memory for locking and so on. But it has a very clean boundary – everything from objects to security can be kept apart. Having multiple users in the same database is possible as well, using things like a Schema. But keeping 15,000 schemas can be challenging as well. My recommendation in complex situations like this is similar to a post on decisions that I did earlier – I lay out the choices on a spreadsheet in rows, and then my requirements at the top in the columns. I  give each choice a number based on how well it meets each requirement. At the end, the highest number wins. And many times it’s a mix – perhaps this person could segment customers into larger regions or districts or products, in a database. Within that database might be multiple schemas for the customers. Of course, he needs to query across all customers, that becomes another requirement. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Integrating Amazon EC2 in Java via NetBeans IDE

  - by Geertjan

  Next, having looked at Amazon Associates services and Amazon S3, let's take a look at Amazon EC2, the elastic compute cloud which provides remote computing services. I started by launching an instance of Ubuntu Server 14.04 on Amazon EC2, which looks a bit like this in the on-line AWS Management Console, though I whitened out most of the details: Now that I have at least one running instance available on Amazon EC2, it makes sense to use the services that are integrated into NetBeans IDE:  I created a new application with one class, named "AmazonEC2Demo". Then I dragged the "describeInstances" service that you see above, with the mouse, into the class. Then the IDE automatically created all the other files you see below, i.e., 4 Java classes and one properties file: In the properties file, register the access ID and secret keys. These are read by the other generated Java classes. Signing and authentication are done automatically by the code that is generated, i.e., there's nothing generic you need to do and you can immediately begin working on your domain-specific code. Finally, you're now able to rewrite the code in "AmazonEC2Demo" to connect to Amazon EC2 and obtain information about your running instance: public class AmazonEC2Demo { public static void main(String[] args) { String instanceId1 = "i-something"; RestResponse result; try { result = AmazonEC2Service.describeInstances(instanceId1); System.out.println(result.getDataAsString()); } catch (IOException ex) { Logger.getLogger(AmazonEC2Demo.class.getName()).log(Level.SEVERE, null, ex); } } } From the above, you'll receive a chunk of XML with data about the running instance, it's name, status, dates, etc. In other words, you're now ready to integrate Amazon EC2 features directly into the applications you're writing, without very much work to get started. Within about 5 minutes, you're working on your business logic, rather than on the generic code that anyone needs when integrating with Amazon EC2.

  Read the article

• Resume on 30 Days of SharePoint

  Dear readers, as you might have noticed... It was an organisational desaster on my end! Even though I continued my studies and research on Microsoft SharePoint 2013 during the last 30 days, I wasn't able to write an article a day to keep you posted on my progress. Nonetheless, I gathered a good number of additional blogs, mainly SharePoint MVP sites, and online forums which will be helpful in the next couple of weeks while I'm actually going to develop a C#-based client which will enable an existing 'legacy' application to SharePoint as a document management system (DMS) besides other already existing solutions. Finding excuses Well, no. Not really. I simply didn't block any or enough time every day to write down my progress during my own challenge. My log book on learning about SharePoint stands at 41 hours and 15 minutes during this month. Which means that I spent an average of more than 1 hour per day on getting into SharePoint. I know that might sound a little bit low but also keep in mind that I went for the challenge on top of my daily job and private responsibilities. During the same period there had been two priority 0 incidents from clients - external root cause - which took presedence over this leisure project. More to come Anyway, it was a first trial and despite the low level of reporting on my blog, I'm confident about what I learned during the last 30 days, and I'm ready to implement the client's requirements. At least, I would say that I have a better understanding about the road map or the path to walk during the next month. As time and secrecy allows I'm going to note down some bits and pieces... During the process of development, I'm going to 'cheat' on the challenge summary article and add links to those new entries. Just for the sake of completeness. Next challenge? Hmm, there had been ideas during the last meetup of the Mauritius Software Craftsmanship Community (MSCC) regarding certifications in IT and eventually we might organise some kind of a study group for specific exams, most probably Microsoft exams towards MCSD Web Developer or Windows Developer.

  Read the article

• Database commands

  - by user12609425

  Ops Center has two database options - you can have Ops Center automatically install a database on the Enterprise Controller system, or you can use your own database on any system you choose. If you use your own database, it's obviously important to make sure that this database is running smoothly. You have a few tools that can help you do this. The first is the ecadm command. This command has a variety of subcommands that let you view and control the status of the Enterprise Controller. Two subcommands in particular are relevant to the database: ecadm verify-db: This subcommand verifies that the database is reachable and that the schemas are configured with the proper permissions. Use the -v option if you want more details; the command is normally terse if the DB is configured correctly. ecadm sqlplus -r: This subcommand opens an sqlplus console connection to the database. The -r option makes this console read-only, which isn't necessary, but is generally a good idea. You can also view the database contents using Oracle SQL Developer or other tools. The Accessing Core Product Data how-to describes this process.

  Read the article

• Software architecture map to aid cross team communication?

  - by locster

  I work in a company where multiple teams each work on different parts of a software product in a vaguely agile/scrum manner. Mostly the organisation works well but there have been instances where a team may make a change without realising its impact on other teams. Where dependence is known communication has been good, and where dependence is suspected then 'broadcast' emails and informal conversations have also worked well. But there exists a sub-set of tasks that fall between the cracks. Broadcast emails are likely not the solution as they would become too numerous such that the email signal/noise ratio would fall. I'm contemplating a solution that involves a sort of map of the software, which details all of the various parts of the system and loosely tries to place interacting and dependent parts near to each other. Each developer then updates their position on the map (today I'm working on X and Y), and therefore if two or more developers happen to be co-located (or proximate) on the map then we can see this each day and this could form the trigger for further discussion on possible overlap and conflict. Is such a method out there and in use? If so what is it and does it work? Otherwise, do you think such a scheme has merit?

  Read the article

• Slightly off topic - How to Fix Sky Go Error [t6013-c1501] (and [t6000-c1501])

  - by bconlon

  Sky doesn't seem to understand what their own errors mean, so I cobbled together an understanding from some other posts and managed to get it working.When you see the error [t6013-c1501] instead of your TV programme in Sky Go, it seems to mean:'You registered a device, but then changed the hardware, so now I'm confused!'In other words, the Digital rights management (DRM) used between Sky Go and Silverlight stored an old fingerprint of your PC, but rather than recognising this and allowing you to remove the device, it just disappears from the 'Manage Devices' page.DISCLAIMER: Perform the following steps at your own risk. It worked for me, but I didn't care if it broke stuff. If you care....don't do it!So, to fix this I did the following:1. Login to Sky Go and click 'Watch live TV' from the home page. It will attempt to show Sky News and fail with the error [t6013-c1501].2. Right click on the error and you should see the Menu option 'Silverlight'. Select this and a dialog should appear. Click the 'Application Storage' tab and delete any entry that relates to sky go. Clcik OK to close the dialog.3. Open explorer and navigate to the folder C:\ProgramData\Microsoft\PlayReady4. Rename the file mspr.hds to mspr.hds.OLD5. Go back to the browser and click F5. You may need to logout/login (not sure).Note: Don't rename/delete the folder C:\ProgramData\Microsoft\PlayReady or you will get the error [t6000-c1501]. The folder must exist in order for the new file to be created by Silverlight. Techie talk:So whoever wrote the code to create a new mspr.hds file didn't write code to check the folder existed causing what I assume is a generic error t6000, probably something like:catch (Exception ex) { WriteToLog("Oops, something broke!"); }#

  Read the article

• Computer Science graduate. Master or full-time job? [closed]

  - by Alex

  Possible Duplicate: Is a Master's worth it? I have just gotten my Bachelor's Degree in Computer Science and I have to make choice. Whether to continue with my full-time job I just got or put the job slightly in the background and concentrate on getting a Master's degree. I am currently working as an embedded C developer in a small company. The cool thing is that, because the team is quite small, my engineering ideas really play a part in the final product. Not to mention that I get to work on very different areas of embedded programming: device drivers and development of a Real Time OS. I am very enthusiastic about my job and what I do. On the other hand, in my country there isn't really a master's degree that focuses on embedded development so my gain from getting this degree will mainly in the field of general computer science knowledge. That being said, is it worth giving up all my spare time which I now use to study different areas of embedded devices and work mainly to get a degree rather than pure knowledge and experience in the field I want to work in?

  Read the article

• The Oracle Architects Training: 40 training sessions for our EMEA partners to build their Oracle Applications and Technical skills

  - by Richard Lefebvre

  There is a lot more to Oracle technology than meets the eye. Sure, you already belong to a small circle of our most experienced and committed partners. But are you making the best use possible of our technology solutions? Put it to the test. Join the “Oracle Partner Architects Training”. It is aimed at providing your experts, architects and consultants with in-depth architectural knowledge about Oracle technology. Here is your chance to learn from the best. Seasoned speakers, exclusive content and no product marketing. Oracle technology beyond the obvious. Mark your calendar The Oracle Partner Architects Training is an online training program. Sign up for the live Webex sessions (scheduled from January 2013 till April 2013) or watch replays as they become available. Feel free to follow training sessions at your own pace. Also, last year’s sessions are still very accurate and very available on architects.oraevents.eu NOTE: Looking to get your consultants Oracle certified? One more reason to join the Oracle Partner Architects Training. It is the fast track to getting their expertise validated with an Oracle certificate.

  Read the article

• Encapsulate standard C functions?

  - by Jack Stout

  While studying the C programming language and learning safe practices, I'm inclined to write a layer of functionality over several parts of the standard library. This would serve two purposes: I could use standard parts of the language in ways that feel more familiar or rational to me, and I could easily replace that functionality with my own, if I needed to. I could benefit from this, but should I do it? As an example, we can consider memory management. If I've written malloc() into the constructors of each of my objects, then decide that I need to handle memory allocation on my own, I have to edit the constructor associated with every object. By referencing my own function, I can change the contents of that function without writing a new constructors. It seems obvious that I should do this, but I'm used to Python. I'm extremely comfortable in that environment and have no problem linking to any part of the standard library from any part of my program because I know I will almost certainly leave that relationship untouched for the life of the project. The situation I'm running into with C feels like I'm trying to hide the language from myself. Will writing a layer of functionality over the C standard library help me in learning the language and developing a codebase, or will it stifle my understanding going forward?

  Read the article

< Previous Page | 596 597 598 599 600 601 602 603 604 605 606 607  | Next Page >