Search Results

Search found 36619 results on 1465 pages for 'damn small linux'.

Page 601/1465 | < Previous Page | 597 598 599 600 601 602 603 604 605 606 607 608  | Next Page >

• USB Flash Drive not Detected on 12.10 x64

  - by Falguni Roy

  My Mediatek usb flash drive is not get detected. The o/p of lsusb falguni@falguni-M61PME-S2P:~$ lsusb Bus 002 Device 002: ID 0e8d:0003 MediaTek Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub and the o/p of usb-devices falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub But in 12.04, the o/p of usb-devices was: falguni@falguni-M61PME-S2P:~$ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:02.1 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=03.05 S: Manufacturer=Linux 3.5.0-18-generic ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=0003 Rev=02.00 S: Manufacturer=MediaTek Inc S: Product=MT6235 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm It was working fine in 12.04. Now after upgrading to 12.10 the problem started. Where is the problem and how to solve it?

  Read the article

• Windows2Linux Porting

  This article describes some basic specific moments of porting application from Windows to Linux

  Read the article

• SJS AS 9.1 U2 (GF v2 U2) - Patch 25 // GF v2.1 - Patch 19 // Sun GlassFish Enterprise Server v2.1.1 Patch 13

  - by arungupta

  SJS AS 9.1 U2 (GF v2 U2) patch 25 is a commercial (Restricted) patch (see Overview of GFv2) available as part of Oracle's Commercial Support for GlassFish. This release is also patch 19 of GlassFish 2.1 and patch 13 of GlassFish 2.1.1. The file-based patches were released onSep 1, 2011; package-based patches were released on Sep 13, 2011. Release Overview Description SJS AS 9.1 U2 (GFv2 U2) - Patch 25 - File and Package-Based Patch for Solaris SPARC, Solaris x86, Linux, Windows and AIX. GlassFish 2.1 - Patch 19 - File and Package-Based Patch for Solaris SPARC, Solaris x86, Linux, Windows and AIX. GlassFish 2.1.1 - Patch 13 - File and Package-Based Patch for Solaris SPARC, Solaris x86, Linux, Windows and AIX. Patch Ids This release comes in 3 different variants: Package-based patches with HADB • Solaris SPARC - [128640-27] • Solarix i586 - [128641-27] • Linux RPM - [128642-27] File-based patches with HADB • Solaris SPARC - [128643-27] • Solaris i586 - [128644-27] • Linux - [128645-27] • Windows - [128646-27] File based patches without HADB • Solaris SPARC - [128647-27] • Solaris i586 - [128648-27] • Linux - [128649-27] • Windows - [128650-27] • AIX - [137916-27] Update Date Nov 23, 2011 Comment Commercial (for-fee) release with regular bug fixes. This is patch 25 for SJS AS 9.1 U2; it is also patch 19 for GlassFish v2.1 and patch 13 for GlassFish v2.1.1. It contains the fixes from the previous patches plus fixes for 18 unique defects. Status CURRENT Bugs Fixed in this Patch: • [12823919]: RESPONSE BYTECHUNK FLUSH WILL GENERATE A MIMEHEADER WHEN SESSION REPLICATION ON • [12818767]: INTEGRATE NEW GRIZZLY 1.0.40 • [12807660]: BUILD, STAGE AND INTEGRATING HADB • [12807643]: INTEGRATE MQ 4.4 U2 P4 • [12802648]: GLASSFISH BUILD FAILED DUE TO METRO INTEGRATION • [12799002]: JNDI RESOURCE NOT ENABLED IF TARGETTING USING ADMIN GUI ON GF 2.1.1 PATCH 11 • [12794672]: ORG.APACHE.JASPER.RUNTIME.BODYCONTENTIMPL DOES NOT COMPACT CB BUFFER • [12772029]: BUG 12308270 - NEED HOTFIX FROM GF RUNNING OPENSSO • [12749346]: VERSION CHANGES FOR GLASSFISH V2.1.1 PATCH 13 • [12749151]: INTEGRATING METRO 1.6.1-B01 INTO GF 2.1.1 P13 • [12719221]: PORTUNIFICATION WSTCPPROTOCOLFINDER.FIND NULLPOINTEREXCEPTION THROWN • [12695620]: HADB: LOGBUFFERSIZE CALCULATED INCORRECTLY FOR VALUES 120 MB AND THE MEMORY FO • [12687345]: ENVIRONMENT VARIABLE PARSING FOR SUN_APPSVR_NOBACKUP CAN FAIL DEPENDING ENV VARS • [12547651]: GLASSFISH DISPLAY BUG • [12359965]: GEREQUESTURI RETURNS URI WITH NULL PREPENDED INTERMITTENT AFTER UPGRADE • [12308270]: SUNBT7020210 ENHANCE JAXRPC SOAP RESPONSE USE PREVIOUS CONFIGURED NAMESPACE PREF • [12308003]: SUNBT7018895 FAILURE TO DEPLOY OR RUN WEBSERVICE AFTER UPDATING TO GF 2.1.1 P07 • [12246256]: SUNBT6739013 [RN]GLASSFISH/SUN APPLICATION INSTALLER CRASHES ON LINUX Additional Notes: More details about these bugs can be found at My Oracle Support.

  Read the article

• Incomplete upgrade 12.04 to 12.10

  - by David

  Everything was running smoothly. Everything had been downloaded from Internet, packages had been installed and a prompt asked for some obsolete programs/files to be removed or kept. After that the computer crashed and and to manually force a shutdown. I turned it on again and surprise I was on 12.10! Still the upgrade was not finished! How can I properly finish that upgrade? Here's the output I got in the command line after following posted instructions: i astrill - Astrill VPN client software i dayjournal - Simple, minimal, digital journal. i gambas2-gb-form - A gambas native form component i gambas2-gb-gtk - The Gambas gtk component i gambas2-gb-gtk-ext - The Gambas extended gtk GUI component i gambas2-gb-gui - The graphical toolkit selector component i gambas2-gb-qt - The Gambas Qt GUI component i gambas2-gb-settings - Gambas utilities class i A gambas2-runtime - The Gambas runtime i google-chrome-stable - The web browser from Google i google-talkplugin - Google Talk Plugin i indicator-keylock - Indicator for Lock Keys i indicator-ubuntuone - Indicator for Ubuntu One synchronization s i A language-pack-kde-zh-hans - KDE translation updates for language Simpl i language-pack-kde-zh-hans-base - KDE translations for language Simplified C i libapt-inst1.4 - deb package format runtime library idA libattica0.3 - a Qt library that implements the Open Coll idA libbabl-0.0-0 - Dynamic, any to any, pixel format conversi idA libboost-filesystem1.46.1 - filesystem operations (portable paths, ite idA libboost-program-options1.46.1 - program options library for C++ idA libboost-python1.46.1 - Boost.Python Library idA libboost-regex1.46.1 - regular expression library for C++ i libboost-serialization1.46.1 - serialization library for C++ idA libboost-signals1.46.1 - managed signals and slots library for C++ idA libboost-system1.46.1 - Operating system (e.g. diagnostics support idA libboost-thread1.46.1 - portable C++ multi-threading i libcamel-1.2-29 - Evolution MIME message handling library i libcmis-0.2-0 - CMIS protocol client library i libcupsdriver1 - Common UNIX Printing System(tm) - Driver l i libdconf0 - simple configuration storage system - runt i libdvdcss2 - Simple foundation for reading DVDs - runti i libebackend-1.2-1 - Utility library for evolution data servers i libecal-1.2-10 - Client library for evolution calendars i libedata-cal-1.2-13 - Backend library for evolution calendars i libedataserver-1.2-15 - Utility library for evolution data servers i libexiv2-11 - EXIF/IPTC metadata manipulation library i libgdu-gtk0 - GTK+ standard dialog library for libgdu i libgdu0 - GObject based Disk Utility Library idA libgegl-0.0-0 - Generic Graphics Library idA libglew1.5 - The OpenGL Extension Wrangler - runtime en i libglew1.6 - OpenGL Extension Wrangler - runtime enviro i libglewmx1.6 - OpenGL Extension Wrangler - runtime enviro i libgnome-bluetooth8 - GNOME Bluetooth tools - support library i libgnomekbd7 - GNOME library to manage keyboard configura idA libgsoap1 - Runtime libraries for gSOAP i libgweather-3-0 - GWeather shared library i libimobiledevice2 - Library for communicating with the iPhone i libkdcraw20 - RAW picture decoding library i libkexiv2-10 - Qt like interface for the libexiv2 library i libkipi8 - library for apps that want to use kipi-plu i libkpathsea5 - TeX Live: path search library for TeX (run i libmagickcore4 - low-level image manipulation library i libmagickwand4 - image manipulation library i libmarblewidget13 - Marble globe widget library idA libmusicbrainz4-3 - Library to access the MusicBrainz.org data i libnepomukdatamanagement4 - Basic Nepomuk data manipulation interface i libnux-2.0-0 - Visual rendering toolkit for real-time app i libnux-2.0-common - Visual rendering toolkit for real-time app i libpoppler19 - PDF rendering library i libqt3-mt - Qt GUI Library (Threaded runtime version), i librhythmbox-core5 - support library for the rhythmbox music pl i libusbmuxd1 - USB multiplexor daemon for iPhone and iPod i libutouch-evemu1 - KernelInput Event Device Emulation Library i libutouch-frame1 - Touch Frame Library i libutouch-geis1 - Gesture engine interface support i libutouch-grail1 - Gesture Recognition And Instantiation Libr idA libx264-120 - x264 video coding library i libyajl1 - Yet Another JSON Library i linux-headers-3.2.0-29 - Header files related to Linux kernel versi i linux-headers-3.2.0-29-generic - Linux kernel headers for version 3.2.0 on i linux-image-3.2.0-29-generic - Linux kernel image for version 3.2.0 on 64 i mplayerthumbs - video thumbnail generator using mplayer i myunity - Unity configurator i A openoffice.org-calc - office productivity suite -- spreadsheet i A openoffice.org-writer - office productivity suite -- word processo i python-brlapi - Python bindings for BrlAPI i python-louis - Python bindings for liblouis i rts-bpp-dkms - rts-bpp driver in DKMS format. i system76-driver - Universal driver for System76 computers. i systemconfigurator - Unified Configuration API for Linux Instal i systemimager-client - Utilities for creating an image and upgrad i systemimager-common - Utilities and libraries common to both the i systemimager-initrd-template-am - SystemImager initrd template for amd64 cli i touchpad-indicator - An indicator for the touchpad i ubuntu-tweak - Ubuntu Tweak i A unity-lens-utilities - Unity Utilities lens i A unity-scope-calculator - Calculator engine i unity-scope-cities - Cities engine i unity-scope-rottentomatoes - Unity Scope Rottentomatoes

  Read the article

• How to restart upgrade (from 11.04 to 12.04)

  - by Konoppo

  Yesterday I was making upgrade (from 11.04 to 12.04) when I have got power failure. I don't known where the installer was, because I wasn't in the front of computer at that moment. After restart Ubuntu started to version 12.04 and everything looks OK. But - I'm not sure if everything was installed correctly? How can I check it or how can I "restart" my automatic upgrade tool to do everything again and "to the end"? Some more infomations: lsb_release -a: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise uname -r: 3.2.0-24-generic apt-get found five updates: linux-headers-3.2.0-24 linux-headers-3.2.0-24-generic linux-image-3.2.0-24-generic linux-libc-dev ubuntu-docs unity-scope-musicstores

  Read the article

• Why kernel source is not installed

  - by Subhajit

  I want to install kernel source in Ubuntu 12.04 which is not installed. I have checked the same using the following command : dpkg -s kernel Output is Kernel is not installed no information available Hence I have followed the following steps to install the same: 1.Installed the Dependencies by the following command: sudo apt-get install gcc libncurses5-dev git-core kernel-package fakeroot build-essential sudo apt-get update && sudo apt-get upgrade Download kernel source by the following command: wget http://www.kernel.org/pub/linux/kernel/v3.x/linux-3.5.tar.bz2 tar -xvf linux-3.5.tar.bz2 cd linux-3.5/ 3.Compiled the source code to generate the .deb packages by the following command make-kpkg clean fakeroot make-kpkg --initrd --append-to-version=-spica kernel_image kernel_headers Install the .deb packages (two .deb packages generated, one is to install the kernel headers, another one is to install the kernel image) by the following command sudo dpkg -i linux-*.deb But after reboot it seems kernel is not installed (checked by dpkg -s kernel). Please tell where I am going wrong. Also, In step 3, I guess I am installing a new kernel (named spica kernel_image) but during the boot up this new kernel is not showing as option. Please help me

  Read the article

• Choosing Technology To Include In Software Design

  How many of us have been forced to select one technology over another when designing a new system? What factors do we and should we consider? How can we ensure the correct business decision is made? When faced with this type of decision it is important to gather as much information possible regarding each technology being considered as well as the project itself. Additionally, I tend to delay my decision about the technology until it is ultimately necessary to be made. The reason why I tend to delay such an important design decision is due to the fact that as the project progresses requirements and other factors can alter a decision for selecting the best technology for a project. Important factors to consider when making technology decisions: Time to Implement and Maintain Total Cost of Technology (including Implementation and maintenance) Adaptability of Technology Implementation Team’s Skill Sets Complexity of Technology (including Implementation and maintenance) orecasted Return On Investment (ROI) Forecasted Profit on Investment (POI) Of the factors to consider the ROI and POI weigh the heaviest because the take in to consideration the other factors when calculating the profitability and return on investments.For a real world example let us consider developing a web based lead management system for a new company. This system can either be hosted on Microsoft Windows based web server or on a Linux based web server. Important Factors for this Example Implementation Team’s Skill Sets Member 1  Skill Set: Classic ASP, ASP.Net, and MS SQL Server Experience: 10 years Member 2  Skill Set: PHP, MySQL, Photoshop and MS SQL Server Experience: 3 years Member 3  Skill Set: C++, VB6, ASP.Net, and MS SQL Server Experience: 12 years Total Cost of Technology (including Implementation and maintenance) Linux Initial Year: $5,000 (Random Value) Additional Years: $3,000 (Random Value) Windows Initial Year: $10,000 (Random Value) Additional Years: $3,000 (Random Value) Complexity of Technology Linux Large Learning Curve with user driven documentation Estimated learning cost: $30,000 Windows Minimal based on Teams skills with Microsoft based documentation Estimated learning cost: $5,000 ROI Linux Total Cost Initial Total Cost: $35,000 Additional Cost $3,000 per year Windows Total Cost Initial Total Cost: $15,000 Additional Cost $3,000 per year Based on the hypothetical numbers it would make more sense to select windows based web server because the initial investment of the technology is much lower initially compared to the Linux based web server.

  Read the article

• New Oracle Solaris 11 Administration book

  - by glynn

  During the development of Oracle Solaris 11, one of the main goals was to modernize the operating system and remove some of the existing frustrations that our administrative audience had in deploying and using the platform within data centers around the world. That meant a comprehensive clean out of some existing technologies to provision the operating system (replacing Jumpstart with Automated Installer) and manage system software (replacing SVR4 with IPS packaging), consolidate the vast spectrum of networking configuration, and enhance the user environment to provide familiarity for those who were used to administering Linux environments among many other things. While some considered the changes to Oracle Solaris 11 as a negative change, most will be impressed at how far we've come - the deeper integration of key technologies, presented in a consolidated and consistent form. It is easier to administer the Oracle Solaris platform that ever before, and I have no doubt that administrators coming from other platforms will be hugely impressed with what they see, especially if they're judging based on past experiences of Solaris 8 and Solaris 9. In fact I'd go further to say that Oracle Solaris 11 is a more powerful, integrated and usable platform that most Linux platforms I've seen. But as with anything, there's always an initial learning curve to get through. We've provided a significant selection of learning materials out on the Oracle Solaris 11 pages on Oracle Technology Network and some great training and certification options. One more option is now available in the form of a book, the Oracle Solaris 11 System Administration The Complete Reference. This provides an exceptional reference to help administrators learn about Oracle Solaris 11, especially those who have come from the Linux platform. As is quoted in the first chapter of the guide: Linux users and developers will find in Oracle Solaris 11 a familiar and quickly productive working environment; we point out similarities and differences between the Linux and Solaris kernels and system administration tools, and describe how typical open source Web development tasks are accomplished in this OS. So I would encourage you to take a read of it and start seriously considering Oracle Solaris 11 to be a platform choice for your data center. Oracle Solaris 11 System Administration The Complete Reference - yours for only $32.50 (if you successfully use the promotion code - otherwise worth shopping around to pick up a good deal).

  Read the article

• How to composite videos and make animations in Ubuntu?

  - by Naveen

  Well, I'm not talking about programs like NukeX, Cinelerra, Jahshaka because they aren't either free or feature rich. I have seen couple of cool videos done on Linux platform, most likely to be Ubuntu. How Linux is Built - Linux Foundation Ubuntu 12.10 Beta Overview - OMG! Ubuntu What is the magic application they are using to composit those videos..? Can upcoming LightWorks workout these effects...? Is there any Linux native OpenGL based application to deal with particles, just like Particle Illusion for Windows? Thanks!

  Read the article

• apt-get upgrade stuck at the same package

  - by decibyte

  Current status I've started to suspect this is not an Ubuntu issue, but related to the internet connection here at my work. Until I'm sure, Im leaving my question below: Original question I'm stuck, can't upgrade my system. Running sudo apt-get upgrade gives me the following: mmm@alalunga:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn libgrip0 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae The following packages will be upgraded: apport apport-gtk bind9-host build-essential dhcp3-client dhcp3-common dnsutils eog evince evince-common firefox firefox-branding firefox-dbg firefox-globalmenu firefox-gnome-support firefox-locale-en gimp gimp-data gir1.2-totem-1.0 glib-networking glib-networking-common glib-networking-services gnupg gpgv icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-6-plugin icedtea-netx icedtea-netx-common icedtea-plugin isc-dhcp-client isc-dhcp-common libapache2-mod-php5 libart-2.0-2 libbind9-80 libdns81 libevince3-3 libgimp2.0 libisc83 libisccc80 libisccfg82 liblwres80 libssl-dev libssl-doc libssl1.0.0 libtotem0 linux-firmware linux-libc-dev openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl php-pear php5-cli php5-common php5-curl php5-dev php5-gd php5-mysql php5-xsl policykit-1-gnome python-apport python-django python-gst0.10 python-problem-report resolvconf thunderbird thunderbird-globalmenu thunderbird-gnome-support totem totem-common totem-mozilla totem-plugins xserver-xorg-input-synaptics 74 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. Need to get 317 MB/327 MB of archives. After this operation, 1.481 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:2 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:3 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:4 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:5 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:6 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:7 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] 9% [7 openjdk-6-jre-headless 27,3 MB/27,3 MB 100%] It keeps downloading the package openjdk-6-jre-headless, then does nothing for a while (hanging on what's the last line above), then download the package again. It's at its 13th download attempt at the moment of writing. The actual downloads seem to be done just fine, but whatever it does after downloading seems to be failing. I tried removing openjdk-6, but then it wanted to install openjdk-7 instead, with the same result, hanging at openjdk-7-jre-headless instead. I also tried changing servers from my local (Danish) to the main server. No luck. It's also keeping me from upgrading alle the other packages. What to do? Update After following instructions in the answer by @lpanebr, it is now stuck at the linux-firmware package. So, maybe it's a more general problem than being related to specific package(s)? Although it did download some packages without problems before getting stuck at linux-firmware.

  Read the article

• ArchBeat Link-o-Rama for 2012-06-28

  - by Bob Rhubart

  Oracle Magazine Technologist of the Year Awards to honor architects at #OOW12 Seven of the ten categories in this year's Oracle Magazine Technologist of the Year Awards are designated to celebrate architects. The winners will be honored at Oracle OpenWorld -- and showered with adulation from their colleagues. Nominations for these awards close on Tuesday July 17, so make sure you submit your nominations right away. Oracle E-Business Suite 12 Certified on Additional Linux Platforms (Oracle E-Business Suite Technology) Oracle E-Business Suite Release 12 (12.1.1 and higher) is now certified on the following additional Linux x86/x86-64 operating systems: Oracle Linux 6 (32-bit), Red Hat Enterprise Linux 6 (32-bit), Red Hat Enterprise Linux 6 (64-bit), and Novell SUSE Linux Enterprise Server (SLES) version 11 (64-bit). FairScheduling Conventions in Hadoop (The Data Warehouse Insider)"If you're going to have several concurrent users and leverage the more interactive aspects of the Hadoop environment (e.g. Pig and Hive scripting), the FairScheduler is definitely the way to go," says Dan McClary. Learn how in his technical post. SOA Learning Library (SOA & BPM Partner Community Blog) The Oracle Learning Library offers a vast collection of e-learning resources covering a mind-boggling array of products and topics. And it's all free—if you have an Oracle.com membership. And if you don't, that's free, too. Could this be any easier? Oracle Fusion Middleware Security: LibOVD: when and how | Andre Correa Fusion Middleware A-Team blogger Andre Correa offers some background on LibOVD and shares technical tips for its use. Virtual Developer Day: Oracle Fusion Development Yes, it's called "Developer Day," but there's plenty for architects, too. This free event includes hands-on labs, live Q&A with product experts, and a dizzying amount of technical information about Oracle ADF and Fusion Development -- all without having to pack a bag or worry about getting stuck in a seat between two professional wrestlers. Tuesday, July 10, 2012 9:00 a.m. PT – 1:00 p.m. PT 11:00 a.m. CT – 3:00 p.m. CT 12:00 p.m. ET – 4:00 p.m. ET 1:00 p.m. BRT – 5:00 p.m. BRT Thought for the Day "Computers allow you to make more mistakes faster than any other invention in human history with the possible exception of handguns and tequila." — Mitch Ratcliffe Source: SoftwareQuotes.com

  Read the article

• 3.0.0-13-lowlatency-pae, where can I find its source

  - by user643019

  I know for another post that using apt-get source linux-image-$(uname -r) I can get the kernel source, but I'm usign the 3.0.0-13-lowlatency-pae kernel and using the command, I got this message: Picking 'linux-lowlatency' as source package instead of 'linux-image-3.0.0-13-lowlatency-pae' So, I will appreciate any help, hope that someone know where it can be located. Thanks everybody in advance.

  Read the article

• Unable to enumerate USB device

  - by takeshin

  Hello, My syslog is constantly filled with messages like this: Oct 16 11:48:35 my-laptop kernel: [61470.980078] hub 1-0:1.0: unable to enumerate USB device on port 2 Oct 16 11:48:35 my-laptop kernel: [61471.192079] hub 3-0:1.0: unable to enumerate USB device on port 2 The only USB device I use is Microsoft Natural Wireless Laser Mouse 7000. The laptop model is HP dv9500, Ubuntu 10.10, but the same was in the versions before. How can I fix this? Edit: Here's the output of sudo lsusb: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 045e:071d Microsoft Corp. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub All USB devices seems to be working fine. I have some problems with DVD-R and sound card, but they are not USB.

  Read the article

• Raid Shows Up as Multiple Drives - Can't Mount

  - by manyxcxi

  I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

  Read the article

• Help with creating bootable usb from iso

  - by Deus Deceit

  --All this is about terminal-- I know some of you will laugh, but I'm trying to install Arch Linux, since I want to learn as much as I can about linux system and how it works. I want to be an expert (maybe in 1000 years, but that's okay :)). The problem is that even tho I know how to do some stuff under linux I'm having a hard time with those names about hard drives, usb, cd, blah blah and how to access them. Big introduction and no question yet, but the purpose is for you to see where I'm standing and give me as many details as possible. And here's the question: How can I put the .iso file in a usb that will run on computers startup and allow me to install Arch linux? Details as to how to turn my pc on and hit F8 or whatever can be discarted lmao :) Ty in advance.

  Read the article

• HP Pavilion dv6 can't shutdown or reboot

  - by Hamza

  Ubuntu 11.04 with HP Pavilion can't shutdown or reboot. I am old linux user, been using linux for years, this is the first time in encounter this issue ever with many Linux distros on the same machine. I tried many distro but mainly Ubuntu ( 10.04 , 10.10 , 10.04 ) , the system can't reboot or shutdown with. Other than that everything works fine. Same issue happened with Linux Mint .... Well I have seen many questions with the same problem and no real answers yet, or accurate replies from Ubuntu or even HP. My Machine is : HP Pavilion dv6 , Core i7 Processor , 4 GB Rams , ATI Radeon .... etc.

  Read the article

• How to build the mainline kernel source package?

  - by Maxime R.

  Ubuntu kernel PPA only provides linux-headers*.deb and linux-image*.deb packages. How can I build the corresponding linux-source*.deb package ? Context: I'm currently running Ubuntu 11.10 with the mainline kernel (3.2 rc6 now) to get a better support for my sandybridge IGP (Dell E6420 laptop with intel i5-2520M CPU). Appears, i'd like to install this touchpad driver, ALPS touchpads being badly supported (see previous link bug report), while waiting for upstream support in kernel version 3.3. Problem is, DKMS keeps complaining about not finding the full kernel source: Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. Appears I may not need the full source but I'd still like to try having it installed to see if it solve my problem. What I tried : Uncompressing the kernel.org source archive in /usr/src/. DKMS still complaining. Manually updating the kernel source package with uupdate and the mainline source package like explained here. Did not succeed. Manually building the linux-source package following @roadmr and @elmicha instructions. I eventually succeeded to build it but DKMS still complained about the missing source. At last I noticed an error I did not catch in the first place while reinstalling the kernel headers. Appears the .deb I got may have been corrupted, downloading it again did the trick :) Alas, while DKMS agreed to compile the module i ran into the following error which appears to have already been reported. This issue isn't yet solved but I won't try to because of the following: in the end I decided to test the precise kernel version 3.2-rc6 through the xorg-edgers ppa which appears to be correctly patched: it works. Nevertheless, it might still be of some interest to know how to build the mainline linux-source package as the Ubuntu Kernel Team doesn't provide it. Not to mention that I learned a lot in the process ^^

  Read the article

• Grub Rescue Unknown Filesystem Error. Grub Corrupted or Filesystem?

  - by nightcrawler

  Now it has happened twice & have been pulling my hairs now... I have installed xubuntu on my external hardisk & have been using it for about 3 months. It has three partitions, one of 500 mb mounted at /boot, 2nd one of 48gb mounted at / & the rest (out of 160gb) is ntfs partition....used as normal external storage. The last storage supposedly acts as a buffer b/w Linux distributions & Win platform, buffer in the sense that it provides a universal channel for data transfers. I have constantly used this external hardisk for data transfers b/w win7 laptop & xubuntu (on this external hd) without any hassle. However, on of my desktops where I have ubuntu I (for the first time) attached this external drive which let me do data transfers where all three partitions properly mounted....but then nasty thing occurred the same that occurred before. I (as usual) tried booting via this external hd (one having xubuntu, one having being formerly used under Ubuntu) I got error Now I am totally devastated because similar thing happened ~6months before when I had fedora 17 in my external hd (instead of xubuntu) & after it was used under ubuntu the same happened...i didn't reported it because I already had planned towards debian instead of rpm! The mystery is that as long as I don't attach this external hd under ubuntu the data never** corrupts whereas under win xp/7 I can use it as a normal usb storage of coarse linux partitions aren’t available under win platforms... **From corrupts I mean hd fails to boot with the error mentioned however cant say whether data within remains untouched? It seems that my grub & or MBR is corrupted. Please sir guide me to solve this issue also why I cant attach & use linux external hds under linux platform Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004e7d0 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 976895 487424 83 Linux /dev/sdc2 978942 96874495 47947777 5 Extended /dev/sdc3 96874496 312575999 107850752 7 HPFS/NTFS/exFAT /dev/sdc5 978944 94726143 46873600 83 Linux /dev/sdc6 94728192 96874495 1073152 82 Linux swap / Solaris I can recall for sure that have seen a thread here when a similar problem occurred & in response someone gave solution of how to mount (now invisible) partitions & recover important data in them. I have misplaced that URL so if any can guide me thither because my important documents resides in / partition What I already have done: Without success I have tried this & related solutions What I plan to do: I believe that filesystem has corrupted & would you recommend solution like this provided I cant recall whether my /boot (500mb) partition was ext4 or ext2 though I am sure that my / (48gb) partition was ext4 UPDATE 1 Attached my external hd under Ubuntu ran followinf command as root grub-install /dev/sdc where /dev/sdc was my external hd containing corrupted xubuntu....it reported all done! I re-ran fdisk -l but to my disappointment it reported Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b6b9167 Disk /dev/sdc doesn't contain a valid partition table ...& now I can't even access its ntfs partition (former /dev/sdc3) please help? UPDATE 2 TestDisk (by cgsecurity) failed at founding any partition table :( TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sdc - 160 GB / 149 GiB - CHS 19457 255 63 Partition Start End Size in sectors

  Read the article

• Oracle Fusion Middleware 11g Release 1 Updates (2014/08/14)

  - by Hiro

  Oracle Fusion Middleware 11g Release 1 Media Pack ?????2014/08/14 ???????????????? 1. Oracle Identity Management Microsoft Windows (32-bit)????????????????????????????? Oracle API Gateway ???Linux x86, Linux x86-64, Microsoft Windows (32-bit), Microsoft Windows x64????????????????????????????????? Oracle Identity Manager Connectors 2. Oracle WebLogic Server on Oracle Database Appliance Linux x86, Linux x86-64, Microsoft Windows (32-bit), Microsoft Windows x64??????????????Oracle WebLogic Server on Oracle Database Appliance 2.9????????????? 3. ??? Oracle Fusion Middleware Repository Creation Utility 11g (11.1.1.7.0) Oracle WebCenter Interaction 10.3.3 ?????????????? Oracle Fusion Middleware Repository Creation Utility??????11.1.1.8.0??????????????? ???Oracle WebCenter Interaction??????My Oracle Support???(???????)?????????????????????? ?????

  Read the article

• How to explain that writing universally cross-platform C++ code and shipping products for all OSes is not that easy?

  - by sharptooth

  Our company ships a range of desktop products for Windows and lots of Linux users complain on forums that we should have been written versions of our products for Linux years ago and the reason why we don't do that is we're a greedy corporation all our technical specialists are underqualified idiots Our average product is something like 3 million lines of C++ code. My and my colleagues analysis is the following: writing cross-platform C++ code is not that easy preparing a lot of distribution packages and maintaining them for all widespread versions of Linux takes time our estimate is that Linux market is something like 5-15% of all users and those users will likely not want to pay for our effort when this is brought up the response is again that we're greedy underqualified idiots and that when everything is done right all this is easy and painless. How reasonable are our evaluations of the fact that writing cross-platform code and maintaining numerous ditribution packages takes lots of effort? Where can we find some easy yet detailed analysis with real life stories that show beyond the shadow of a doubt what amount of effort exactly it takes?

  Read the article

• iptables: built-in INPUT chain in nat table?

  - by ughmandaem

  I have a Gentoo Linux system running linux 2.6.38-rc8. I also have a machine running Ubuntu with linux 2.6.35-27. I also have a virtual machine running Debian Unstable with linux 2.6.37-2. On the Gentoo and Debian systems I have an INPUT chain built into my nat table in addition to PREROUTING, OUTPUT, and POSTROUTING. On Ubuntu, I only have PREROUTING, OUTPUT, and POSTROUTING. I am able to use this INPUT chain to use SNAT to modify the source of a packet that is destined to the local machine (imagine simulating an incoming spoofed IP to a local application or just to test a virtual host configuration). This is possible with 2 firewall rules on Gentoo and Debian but seemingly not so on Ubuntu. I looked around for documentation on changes to the SNAT target and the INPUT chain of the nat table and I couldn't find anything. Does anyone know if this is a configuration issue or is it something that was just added in more recent versions of linux?

  Read the article

• Freescale One Box Unboxing (then installing Java SE Embedded technology)

  - by hinkmond

  So, I get a FedEx delivery the other day... "What cool device could be inside this FedEx Overnight Express Large Box?" I was wondering... Could it be a new Linux/ARM target device board, faster than a Raspberry Pi and better than a BeagleBone Black??? Why, yes! Yes, it was a Linux/ARM target device board, faster than anything around! It was a Freescale i.MX6 Sabre Smart Device Board (SDB)! Cool... Quad Core ARM Cortex A9 1GHz with 1GB of RAM. So, cool... I installed the Freescale One Box OpenWRT Linux image onto its SD card and booted it up into Linux. But, wait! One thing was missing... What was it? What could be missing? Why, it had no Java SE Embedded installed on it yet, of course! So, I went to the JDK 7u45 download link. Clicked on "Accept License Agreement", and clicked on "jdk-7u45-linux-arm-vfp-sflt.tar.gz", installed the bad boy, and all was good. Java SE Embedded 7u45 on a Freescale One Box. Nice... Hinkmond

  Read the article

• What folder is this code signifying?

  - by clifgray

  I am trying to install OpenNi on ubuntu and have found some decent looking instructions but I am not sure what I need to do for this one specific case. Here are the instructions and here is the line that is tripping me up: cd OpenNI/Platform/Linux/CreateRedist/ chmod +x RedistMaker ./RedistMaker cd ../Redist/OpenNI-Bin-Dev-Linux-x64-v1.5.2.23/ sudo ./install.sh I don't know what folder the cd ../Redist/OpenNI-Bin-Dev-Linux-x64-v1.5.2.23/ line is talking about and can't find it anywhere. Does anyone know what this is?

  Read the article

• Use windows 7 inside virtual box,as guest i mean, to create a Windows 7 USB using "Windows 7 USB/DVD Download Tool" ? (Linux as host)

  - by Abel Coto

  I want to download the Windows 7 professional iso (x32), from microsoft, and , i can do two things. Or buy a new burner , as mine doesn't work (i am trying to decide what dvd writer i could buy) or use a usb dongle to copy the iso to it , and install it via usb. I want to install Windows 7 in a netbook that now has debian,and in my pc. I think i have to buy only the license for the pc , as the netbook came with windows 7 preinstalled, so i suppose that i can use that serial to activate the windows , although i don't know how to install windows 7 starter instead of professional (i think if you remove a file from the iso, windows let you choose the edition to install). The problem is that in both pcs there isn't any windows , only debian. My father has a netbook with windows 7 starter, but i think it hasn't antivirus (at least until have the Karspersky Internet security for 3 pcs bought ), and i don't trust to make the usb there , if i don't now that there isn't any virus or malware. So i am trying to find a way of Create a Windows 7 usb installation , to at least be able to install windows 7 in the netbook without a external dvd writer. I know that with dd in linux you can copy a debian.iso to the usb , and then install debian with it (i've done it) using something like dd if=win7.iso of=/dev/sdb, but i don't know if this would work for windows 7 iso,and if dd will correctly copy the iso to the usb. I suppose that if you are able to boot and install windows 7 from the usb , is that the method works,and you can forget of problems later with the windows 7 installation (problems because some files could not be copied or like). So , i remembered that Microsoft created a tool to copy the iso to the usb using windows. So i thought that i could install in my pc , virtual box , as i have VT and 8 GB ram in it, and download the iso from microsoft ,install windows 7 in the virtual machine , and then copy the iso inside the machine , donwload the iso tool, and atach a usb to the pc, connect it to the guest , and use the tool to copy the iso to the USB. But i don't now if is possible to use a virtual machine to do this , or the virtualization could give problems with the usb, or something. I have found some minutes ago this How to make a windows 7 usb flash install media, from linux? The first method (dd) is the one i like more , and i trust more ( i don't now if the second method using ms-sys , works well , and if i can trust it. I understand that a iso is like a .rar , but no compressed,only containing the files ,so mount the iso and cp the data inside perhaps is ok. Although the method i like more is the microsoft one (more because is from microsoft , and i suppose they now what they do ,at least with this usb related thing, than anything). Perhaps worth more to buy a external dvd writer haha ... Should the virtual machine method work ?

  Read the article

• virtual box upgrade

  - by Husni

  I did upgrade virtualbox from 4.1 to 4.2 wheneverver I want to load my win xp vdi, it gives me the following error: "Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing '/etc/init.d/vboxdrv setup' as root. If it is available in your distribution, you should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary." I ran the suggested step to reinstall the kernel module, and the log file files is as follow: Makefile:181: * Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Stop. Makefile:181: * Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Stop. Makefile:181: * Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Stop. I still unable to re-run my win virtual XP vdi file. anyone have a clue?

  Read the article

< Previous Page | 597 598 599 600 601 602 603 604 605 606 607 608  | Next Page >