Search Results

Search found 39224 results on 1569 pages for 'content delivery network'.

Page 603/1569 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >

  • recent unreliable wireless connection with Netgear KWGR614 router

    - by gabkdlly
    Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

    Read the article

  • Access my mac's local server from a windows machine

    - by Simon Davies
    I am running my test sites on my mac, but I would like be able to use my windows machine to also access this server and be able to write / read fiels form this server. I can access my sites on my windows by using the IP address 192.168.1.???. But I would like to be able to use my windows machine to also access the fiels and edit them. Any ideas much appreciated. Some details: Mac OSX SL file sharing set to on. Windows 7 (tried setting up network map using afp://192.... but nothing) Both machines are connected to a local network, with several other machine (windows) Thanks

    Read the article

  • Large keepalive_requests values are severely slowing-down Nginx

    - by Gil
    When running a bacon (43-byte transparent pixel) load test on Nginx, we have tried several keepalive_requests values (from 10 to 100,000) and the optimal value seems to be 10. Here are the server HTTP headers of this tiny reply: HTTP/1.1 200 OK Server: nginx/1.5.6 Date: Wed, 23 Oct 2013 12:39:45 GMT Content-Type: image/gif Content-Length: 43 Last-Modified: Mon, 28 Sep 1970 06:00:00 GMT Connection: keep-alive Nginx is twice slower with keepalive_requests 100000 than with keepalive_requests 10. Can you help understanding that result? Or tell what we do wrong? For reference, here is the nginx.conf file.

    Read the article

  • How do I set zone priority in Microsoft DNS?

    - by Justin
    I have a standard small network setup (20 users) on Active Directory. All Windows machines have a primary DNS server as the AD and a secondary DNS server as Google PDNS. I want to setup a DNS entry that exists in real DNS but set it up on our DC so that local requests would route this public domain to a local development machine on the network. I setup the zone in DNS which results in the clients resolving the public FQDN to our internal IP. However, sometimes it still resolves to the "real" value (I check by pinging it). Is there some way to give the zone definition in my DC DNS higher priority? Or will the client that has secondary public DNS always at sometimes have a competing entry for this zone?

    Read the article

  • Routing Essentials

    - by zharvey
    I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

    Read the article

  • What are the hard and fast rules for Cache Control?

    - by Metalshark
    Confession: sites I maintain have different rules for Cache Control mostly based on the default configuration of the server followed up with recommendations from the Page Speed & Y-Slow Firefox plug-ins and the Network Resources view in Google's Speed Tracer. Cache-Control is set to private/public depending on what they say to do, ETag's/Last-Modified headers are only tinkered with if Y-Slow suggests there is something wrong and Vary-Accept-Encoding seems necessary when manually gziping files for Amazon CloudFront. When reading through the material on the different options and what they do there seems to be conflicting information, rules for broken proxies and cargo cult configurations. Any of the official information provided by the analysis tools mentioned above is quite inaccessible as it deals with each topic individually instead of as a unified strategy (so there is no cross-referencing of techniques). For example, it seems to make no sense that the speed analysis tools rate a site with ETag's the same as a site without them if they are meant to help with caching. What are the hard and fast rules for a platform agnostic Cache Control strategy? EDIT: A link through Jeff Atwood's article explains Caching in superb depth. For the record though here are the hard and fast rules: If the file is Compressed using GZIP, etc - use "cache-control: private" as a proxy may return the compressed version to a client that does not support it (the browser cache will hold files marked this way though). Also remember to include a "Vary: Accept-Encoding" to say that it is compressible. Use Last-Modified in conjunction with ETag - belt and braces usage provides both validators, whilst ETag is based on file contents instead of modification time alone, using both covers all bases. NOTE: AOL's PageTest has a carte blanche approach against ETags for some reason. If you are using Apache on more than one server to host the same content then remove the implicitly declared inode from ETags by excluding it from the FileETag directive (i.e. "FileETag MTime Size") unless you are genuinely using the same live filesystem. Use "cache-control: public" wherever you can - this means that proxy servers (and the browser cache) will return your content even if the rest of the page needs HTTP authentication, etc.

    Read the article

  • A "tinkered" PC can ping by IP, not by hostname. How to fix?

    - by aitchnyu
    Like this: root@tis-server:~# ping www.google.com ping: unknown host www.google.com root@tis-server:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=55 time=50.3 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=55 time=65.4 ms It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. It also makes route add default gw 192.168.0.1 necessary for each reboot to atleast ping by IP. How do I fix this? It is Ubuntu 11.10 As requested: Output of ifconfig: eth0 Link encap:Ethernet HWaddr 48:5b:39:ae:21:98 inet addr:192.168.0.100 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feae:2198/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13194 errors:0 dropped:0 overruns:0 frame:0 TX packets:5156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1420596 (1.4 MB) TX bytes:827295 (827.2 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4817 errors:0 dropped:0 overruns:0 frame:0 TX packets:4817 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377732 (377.7 KB) TX bytes:377732 (377.7 KB) Output of resolv.conf: Output of /etc/network/interfaces: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0

    Read the article

  • Configure IIS 6 to deny access to specific file based upon IP address

    - by victorferreira
    Hello guys, We are using IIS 6 as our webserver. And we need to deny the access for one specif file, placed in only one specific URL, to everybody OUTSIDE the local network. In other words, if somebody is trying to access that filme/page from their own computer at home, using the internet, they must not succeed. But, if the same person try to do that at the same network of the web server, its ok. I am not sure about that, but Apache uses ORDER DENY,ALLOW. You specify the URL, allow or deny to all or to a range of IP. Any suggestions? Thanks!

    Read the article

  • How can I to take an HDMI TV broadcast and overlay text in real time?

    - by ObligatoryMoniker
    Our company wants to be able to have LCD TVs displaying TV with the ability to add an overlay, like a stock ticker at the bottom of the screen, where human resources can add content to be displayed. I have been trying to nail down the correct terminology for this and come across terms like Keying, Compositing, Live Broadcast Graphics Presentation, and Hardware Overlay but I don't know which of these terms is truly the correct way to refer to what I am trying to do. Black Magic offers a product that seems like it can do what I am looking for but their product seems like it is geared for a totally different purpose than what I would be using it for. Compix also seems to have a product that would do what I need but again it seems like killing a fly with a sledge hammer. How can I to take an HDMI TV broadcast and overlay arbitrary content in real time?

    Read the article

  • ubuntu pptp connections from command line

    - by Ian R
    I'm using a lot of vpn connections daily for my work and I want to program a pptp dialer in python to ease my job a little bit by automating things. I usually go with network-manager-pptp to setup my connections but I would like to skip this gui tool and do it from the script. Something like a dialer. My question is. Can pptp connections be established using the command tools only? Also, where does network-manager-pptp saves its failes so I can take a look and see what configs it generates. Any help is much appreciated.

    Read the article

  • Get/Assign IP addresses assigned by the DHCP sever with DLink switches in between

    - by Ranjith Kumar
    In our office the setup is like we have a UBUNTU server with DHCP Server connected to all the PCS via 24 port and 8 port DLink switches. How can I find all the PCS(with client name, ip and mac address)in the network?? When I do "vi /var/lib/dhcp3/dhcpd.leases", I get all the ip addresses for the switches. I have used "arp-scan --interface=eth0 --localnet" to get all the IPs and MAC Addresses in my local network. I couldn't find any option to diplay client name. Also I would like to assign particular IP for a particular PC. I have done the changes in the dhcp.conf file but it is not working as they are not directly connected to DHCP-server(DLink switches in between). How can I assign IPs for PCs in this kind of setup. Thanks in advance

    Read the article

  • Computers "applying computer settings" for a long time on start-up...why?

    - by tombull89
    Hello. Might be a bit of a slong shot but I'm stumped, along with the ICT Manager for the school I'm working it. In one of the IT rooms when you switch a computer on it will boot through BIOS fine, but when it gets to "applying computer settings" it can hang for a long time (~15 minutes). If you unplug the computer from the network it starts up fine, gets to the login screen, then you can plug the network cable in and it will work fine. I don't think it's anything to do with the fact we've been coming close to running out of IP addresses or a problem with our DHCP. Microsoft KB says apply the latest service pack, which we've done, and check a service. Servers and domian controllers are S2003, Computers and Desktops are XP. Does anybody have any thoughts on what to try?

    Read the article

  • ISA caching with no cache-related info in response header

    - by Mike M. Lin
    From the documentation, I can't figure out what criteria an ISA server uses to figure out if a cached file is valid when no cache-related info is in the response header. Let's say I got this header in my response on Thu, 13 Jan 2011 18:43:35 GMT: HTTP/1.1 200 OK Date: Thu, 13 Jan 2011 18:43:35 GMT Server: Apache/2.2.3 (Red Hat) Content-Language: en X-Powered-By: Servlet/2.5 JSP/2.1 Keep-Alive: timeout=15 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html; charset=ISO-8859-1 There's no cache directive, no last-modified field, no expires field. How will the ISA server decide for how long to cache this response?

    Read the article

  • Who is a CMS really for?

    - by Eirc man
    I have started lately discovering Content Management Systems, and I was wondering, who is really CMS for? What I mean by that: is it only for companies, small businesses or individuals, that pays a contractor to make a website that it's users can just upload content through a easy interface. Or is it used also by programmers, to build their own websites, projects? Would a Facebook, Tweeter, StackExhange ever started by using a CMS, a very powerful one for example. Would you as a programmer build your own "fancy" website on top of a CMS, for example like Typo3, or you would build it from scratch? P.S To be more clear is a summary: What I mean to begin with is, would I as a developer choose a CMS to develop a website that can be scaled with a big base of users, be stuck if I choose to start with a CMS system. What if I build a website using CMS, and the website explodes in popularity, and then I wanted to add much more functionality that I have planed, is it possible that the CMS will limit the growth, because it might have not been build for that kind of scale?

    Read the article

  • Windows server 2003 mapping home drive wrong

    - by Sandman2010
    hey all, first question... we have around 30 servers in an Active Directory environment with 600 student computers and 100 staff desktops with XP SP2/3, the win server 2003 has the staff home drives on a NAS and in the last few days after some server updates is now mapping home drives to the \servername\home instead of \severname\home\%username%, its simple to re map the network drive but is annoying. we dont use login script to map home drive but use a VB script for other network drives and if we add the home drive mapping to that it works, but shouldnt the profile option in users AD account map that correctly? which do you all recommend, AD profile mapping or VB Script mapping Home drives? thanks Steven

    Read the article

  • Is it possible to add tcp autotuning to windows xp?

    - by Caspin
    I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

    Read the article

  • Is it possible to add tcp autotuning to windows xp?

    - by Caspin
    I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

    Read the article

  • 12.04 WiFi issue on a particular access point

    - by user71706
    I have a WiFi access point that I connect to a PC to share its Internet connection with multiple machines, in a training environment. All the machines with 11.04 connect to this access point with no problem, and can access any server on the Internet. These machines have an Intel Wireless -N 1030 BGN chipset (as reported by lspci). Now, my problem is that I don't manage to connect 12.04 machines to this wireless network. The systems I tried do manage to connect (confirmed by Network Manager), but when I try to access a website like http://kernel.org, the browser shows "Connecting to kernel.org...", but displays a "The connection has timed out" error page. Other symptoms: Name resolution works (for example 'nslookup kernel.org') finds kernel.org's IP address 'ping kernel.org' doesn't work The same 12.04 machines have no problem at all with other wireless networks. So there is probably something weird in my access point (though the 11.04 machines are not impacted). Would you have any suggestions for investigating this issue? Thanks, Michael.

    Read the article

  • What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

    - by user12620111
    A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

    Read the article

  • Mac OS X: pushing all traffic through a VMWare VM

    - by bj99
    I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

    Read the article

  • How to set up a file server in a restricted corporate environment

    - by Emilio M Bumachar
    I work in a big corporation, and the disk space my team gets in the corporate file server is so low, I am considering turning my work PC into a file server. I ask this community for links to tutorials, software suggestions, and advice in general about how to set it up. My machine is an Intel Core2Duo E7500 @ 3GHz, 3 GB of RAM, Running Windows XP Service Pack 3. Upgrading, formatting or installing another OS is out of the question. But I do have Administrator priviledges on the PC, and I can install programs (at least for now). A lot of security software I don't even know about is and must remain installed. But I only need communication whithin the corporate network, which is not restricted. People have usernames (logins) on the corporate network, and I need to use them to restrict access. Simply put, I have a list of logins of team members, and only people in the list should access the files. I have about 150 GB of free disk space. I'm thinking of allocating 100 GB to the team's shared files. I plan monthly backups on machines of co-workers, same configuration. But automation of backups is a nice, unnecessary feature: it's totally acceptable for me to manually copy the contents to a different machine once a month. Uptime is important, as everyone would use these files in their daily work. I have experience as a python and C programmer, but no experience whatsoever as a sysadmin, and almost nothing of my programming experience is network programming. I'm a complete beginner in this. Thanks in advance for any help. EDIT I honestly appreciate all the warnings, I really do, but what I plan to make available is mostly stuff that now is solely on DVDs just for space reasons. It's 'daily work' to read them, but 'daily work write' files will remain on the corporate server. As for the importance of uptime, I think I overstated it: a few outages are OK, it's already an improvement over getting the DVDs. As for policy, my manager is kind of on my side, I will confirm that before making my move. As for getting more space through the proper channels, well, that was Plan A, and it's still on the table... But I don't have much hope. I'm not as "core businees" as I'd like.

    Read the article

  • How to port forward https traffic via ssh and/or remote desktop to through several networks and PCs?

    - by donttellya
    I have the following environment: In company X I develop a application on a pc A in network A with ip address 192.168.100.50 which has to do an https request to an http server located in the intranet of company Y In company X is another pc B in network B with ip address 192.168.200.100 pc B (of company X) can access the intranet from company Y via ssh tunnel (putty) pc A (of company X) can ping pc B (of company X) note: pc A can also do a remote desktop connection to pc B) pc B can ping the http sever pc A can not ping the http server How can the https request from pc A of company X get to the http server of company Y? On which pc must be putty configured? And which settings for host, port forwarding etc. has to be done in putty? So finally the https request should go from PC A - PC B - Http Server in company Y.

    Read the article

  • isolate web servers on intranet with dfl-800

    - by microchasm
    I administer a small network (10 users). I'm getting ready to deploy a internal webapp that will be hosted and accessed locally only. There are about 10 users on the network (192.168.111.0/24), a win2k3 server, apache (RHEL), and Mysql (RHEL), and various miscellaneous peripheries. I'd like to isolate the apache and sql boxes into a seperate area of the lan to keep things easier to maintain/grow. I've been reading about vlans, subnets, etc.. I'm not clear, however, which would be the best solution for our setup. Thanks for any tips and or advice.

    Read the article

  • Will disabling NAT on my wireless router cause a performance hit on my DSL router?

    - by user117313
    I have a Thomson TG508v2 router/modem and a brand new AirPort Extreme connected to it. At first, I set the AirPort Extreme to "share a public IP", which enables DHCP/NAT. Everything works great but I was having the Double NAT error. So I set the AirPort Extreme as bridge mode, which disables DHCP/NAT and let my crappy modem handle my internal network IPs. Will this cause any performance hit in my network? I'm worried because I'll outsource this job from AirPort Extreme (premium hardware) to the crappy modem. Before you suggest, I tried setting my modem as a bridge and configuring PPPoE on the AirPort Extreme, however it wouldn't connect to the internet, so I just dismissed leaving the modem as bridge.

    Read the article

  • Get Unlimited Oracle Training for Your Team for an Entire Year

    - by KJones
    Written By Amit Kumar, Senior Director Oracle University Digital Training  Oracle University has been in the training business for a long time (over 30 years!) and has worked with many Oracle customers over the years.  We understand that getting your teams trained on the latest Oracle technologies is not always easy. Training becomes more challenging when you have remote teams, team members with different skill levels or experienced team members who just need the content that covers the latest product features. It can also be challenging to predict your training needs for the year, making it all the more difficult to provide training in a timely manner. Oracle Unlimited Learning Subscription is the Answer We’ve listened to our customers and we’ve worked hard to put together a flexible training solution that enables team members to get the training that addresses their individual needs, right when they need it. This new Oracle Unlimited Learning Subscription provides teams with one year of unlimited access to: •    All of Oracle's Training On Demand video courses for in-depth product training •    All of Oracle's Learning Streams, which provide fresh product content from Oracle experts for continuous learning •    Live connections with Oracle's top instructors  •    Dedicated labs for hands-on practice The Oracle Unlimited Learning Subscription is 100% digital, giving you maximum flexibility. It simplifies how you plan and budget for your team training.  Learning Oracle and staying connected with Oracle really has never been easier. Take a tour and contact your Oracle University representative today to learn more and request a demo. 

    Read the article

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >