Search Results

Search found 16288 results on 652 pages for 'online apps'.

Page 603/652 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >

• Why doesn't video run smoothly on my laptop anymore?

  - by andygrunt

  This might be an impossible question to answer remotely but I figure there may be some common causes that people can suggest so I think it's worth asking... Video no longer plays smoothly on my laptop. It used to but not for a while now. For example, playing a video on YouTube is pretty typical: I press play (making sure it's not on HD or even HQ) and the video buffers a little then starts to play. At first it plays fine then the video starts to stutter, turning into a slideshow while the sound continues to play smoothly. If I try playing the same video on my Playstation 3 (which is linked to the same network) it plays smoothly so it can't be the connection. Another example is streaming DivX videos. Again, I wait while it buffers and it starts but very soon, instead of a slideshow, this time the video just plays slowly while the sound continues as normal (instantly getting out of sync). Even if I let the video fully load before pressing play (i.e. it's no longer streaming), it still behaves the same way. I can even let it load 100% then save the file to hard disk and use VLC player to view it, and the same thing happens. I'm using an old laptop running Windows XP. For the past several years it's been connected to the router via Wi-Fi but in the past few days I've changed that to a network cable (like my PS3) but that hasn't helped. Yes, I regularly install various bits and pieces of software but nothing that I can identify as being the cause. So, are there known causes of this sort of behaviour and if so, what can I do to fix it? Thanks. Update to answer a few questions... Laptop Spec' (note: video has played back fine for the majority of time I've had the laptop) Toshiba Satellite 1900-603 (possibly called something else outside the UK) Intel Pentium 4 2.2 Ghz Processor Originally had 512Mb memory but recently doubled that to 1 Gig of memory Graphics: ATI Mobility Radeon 16Mb DDR VRAM Windows XP SP3 (Home edition) Over the years I've done several things to speed it up (disabling indexing etc) and am generally happy with the performance. I also regularly have a clear out of old software (if for no other reason than the laptop only has a 40Gb hard disk) and use CCleaner and Glary Utilities to strip out much of the crap from my system. Also recently (after doubling the memory), I've tried a few new things which might be likely candidates for slowing the video down such as Rocketdock, Jingle keyboard (which gives an old style 'clacky' typewriter sound when I type - love it), SugarSync, Taskbar Shuffle. However, the video doesn't play smoothly even when I try quit all these apps.

  Read the article

• Unable to load type error in ASP.NET 4 application on Windows Server 2003 / IIS6 -- only happens after first worker process recycle

  - by Daniel Coffman

  I'm running an ASP.NET 4.0 web application on IIS6 (Windows Server 2003 x64). This app is one of many running on this server under the Default Web Site -- but is alone on it's own application pool because the other sites are all running ASP.NET 2.0 still. When I deploy my application, it works just fine until the application pool recycles or kills its worker process (by default 2 hours or 20 minutes with no activity). After this, I get the error: "Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information." Refreshing the page, recycling the application pool, and iisreset do nothing. But, I can bring the site back online again for a little while by simply redeploying it. The stack trace seems to start at an EntityDataSource -- see below: [ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.] System.Reflection.RuntimeModule.GetTypes(RuntimeModule module) +0 System.Reflection.Assembly.GetTypes() +144 System.Data.Metadata.Edm.ObjectItemConventionAssemblyLoader.LoadTypesFromAssembly() +45 System.Data.Metadata.Edm.ObjectItemAssemblyLoader.Load() +34 System.Data.Metadata.Edm.AssemblyCache.LoadAssembly(Assembly assembly, Boolean loadReferencedAssemblies, ObjectItemLoadingSessionData loadingData) +130 System.Data.Metadata.Edm.AssemblyCache.LoadAssembly(Assembly assembly, Boolean loadReferencedAssemblies, KnownAssembliesSet knownAssemblies, EdmItemCollection edmItemCollection, Action`1 logLoadMessage, Object& loaderCookie, Dictionary`2& typesInLoading, List`1& errors) +248 System.Data.Metadata.Edm.ObjectItemCollection.LoadAssemblyFromCache(ObjectItemCollection objectItemCollection, Assembly assembly, Boolean loadReferencedAssemblies, EdmItemCollection edmItemCollection, Action`1 logLoadMessage) +580 System.Data.Metadata.Edm.ObjectItemCollection.ExplicitLoadFromAssembly(Assembly assembly, EdmItemCollection edmItemCollection, Action`1 logLoadMessage) +193 System.Data.Metadata.Edm.MetadataWorkspace.ExplicitLoadFromAssembly(Assembly assembly, ObjectItemCollection collection, Action`1 logLoadMessage) +140 System.Web.UI.WebControls.EntityDataSourceView.ConstructContext() +756 System.Web.UI.WebControls.EntityDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +147 This is a bug filed for the same (or similar) problem: http://connect.microsoft.com/VisualStudio/feedback/details/541962/unable-to-load-one-or-more-of-the-requested-types-connected-with-entitydatasource Question: Has anyone seen this and have advice? I've tried copy-local on all the references... Works just fine on my dev machine. Works on the server until the application pool worker process recycles. I'm building in release mode, but experience the same result when I build for debug. I'm stumped.

  Read the article

• Asus M4A79XTD-EVO / AMD Phenom II X4 965 Crashes / BSOD / Hangs / Restarts

  - by Tiby

  I'll try to be as concise as possible because I have a lot to say about my problem, but I'd rather say it when asked or when I feel it's necessary, just to make this initial reading clearer. For about a year and a half I have periods when my system has all the problems in the title (I'll use the word 'crash' for either one). I'll list some patterns and what I tried to do and what were the results, but the list is not exclusive: usually it crashes when a CPU-intensive operation is in progress, like a game or video encoding or HD movie rendering, but also sometimes crashes when I'm doing nothing after a first crash the system is very unstable and sometimes it crashes even during POST, or doesn't boot at all Some months ago I went to a local service (one that you just put your computer on the table and sit there with a guy and trying to figure out the problem, very rare these days) and they used OCCT and it crashed every time he changed some part to test it out (PSU, RAM, video card, HDD). The last one was the CPU. They changed the CPU and it didn't crash any more. Then when they put my CPU back, it also didn't crash. We figured that the trouble was the thermal paste (probably some 2 years old) because it was the only thing changed while testing. Up until 2 weeks ago, I haven't had any more problems. 2 weeks ago the problems reappeared. I changed again the thermal paste, put some Arctic Silver 5, and for about a week everything worked perfect (tried some games, video encoding, no more crashes). But again it started crashing in the same fashion as the first time. But now, instead, I figured out a very odd behaviour: when I start some of the apps above, in most cases it crashes if I start OCCT and turn on the CPU test, and run any of the programs above, it doesn't crash, even if the CPU is on 100% load (and 65-70 degrees Celsius temperature) if I shut down OCCT and continue using the programs, it crashes in a very short period of time (even if the CPU is on 5-10% load and 40 degrees) There are so many patterns and temporary solutions that I figured out in this year and a half period of time, that I can't include them all because I don't know which one are more relevant, but I'll happily provide any details you ask. My system is: CPU: AMD Phenom II X4 965 (3400 MHz - 125W) MB: ASUS M4A79XTD - EVO RAM: Corsair Vengeance 8 GB (2 x 4GB) CL8 1600MHz Video: HIS Radeon HD5770 1GB PSU: Corsair 750W HDD: Western Digital 1TB OS: Win 7 Enterprise 64 BIT (also tried with Windows Server 2008 R2 Trial and Win XP)

  Read the article

• Linux filesystem with inodes close on the disk

  - by pts

  I'd like to make the ls -laR /media/myfs on Linux as fast as possible. I'll have 1 million files on the filesystem, 2TB of total file size, and some directories containing as much as 10000 files. Which filesystem should I use and how should I configure it? As far as I understand, the reason why ls -laR is slow because it has to stat(2) each inode (i.e. 1 million stat(2)s), and since inodes are distributed randomly on the disk, each stat(2) needs one disk seek. Here are some solutions I had in mind, none of which I am satisfied with: Create the filesystem on an SSD, because the seek operations on SSDs are fast. This wouldn't work, because a 2TB SSD doesn't exist, or it's prohibitively expensive. Create a filesystem which spans on two block devices: an SSD and a disk; the disk contains file data, and the SSD contains all the metadata (including directory entries, inodes and POSIX extended attributes). Is there a filesystem which supports this? Would it survive a system crash (power outage)? Use find /media/myfs on ext2, ext3 or ext4, instead of ls -laR /media/myfs, because the former can the advantage of the d_type field (see in the getdents(2) man page), so it doesn't have to stat. Unfortunately, this doesn't meet my requirements, because I need all file sizes as well, which find /media/myfs doesn't print. Use a filesystem, such as VFAT, which stores inodes in the directory entries. I'd love this one, but VFAT is not reliable and flexible enough for me, and I don't know of any other filesystem which does that. Do you? Of course, storing inodes in the directory entries wouldn't work for files with a link count more than 1, but that's not a problem since I have only a few dozen such files in my use case. Adjust some settings in /proc or sysctl so that inodes are locked to system memory forever. This would not speed up the first ls -laR /media/myfs, but it would make all subsequent invocations amazingly fast. How can I do this? I don't like this idea, because it doesn't speed up the first invocation, which currently takes 30 minutes. Also I'd like to lock the POSIX extended attributes in memory as well. What do I have to do for that? Use a filesystem which has an online defragmentation tool, which can be instructed to relocate inodes to the the beginning of the block device. Once the relocation is done, I can run dd if=/dev/sdb of=/dev/null bs=1M count=256 to get the beginning of the block device fetched to the kernel in-memory cache without seeking, and then the stat(2) operations would be fast, because they read from the cache. Is there a way to lock those inodes and/or blocks into memory once they have been read? Which filesystem has such a defragmentation tool?

  Read the article

• How can I change how OS X's 'say' command pronounces a word?

  - by jwhitlock

  OS X's say command is useful for some tasks (such as Skype's 'notify me when a contact comes online), but it is pronouncing some names incorrectly. Is there a way to teach say to pronounce a word differently? For example, try: say "Hi, Joel Spolsky" The 'ol' sounds like 'ball' rather than 'old'. I'd like to add an exception that say "Pronounce Spolsky like this", rather than try to teach new linguistic rules. I bet there is a way since it can pronounce "iphone" as Apple wants. Update - After some research, here's what I've learned: Text-to-speech is split between turning the text to phonemes, and then the phonemes are turned into audio using a voice. Changing the voice doesn't effect the phonemes. The Speech Synthesis Manager has some functions for turning text to phonemes, and a method for registering a speech dictionary that will add new text-phoneme maps. However, Apple's speech dictionary must be in a binary form - I didn't find any plist XML. Using dtrace while running say, I found some interesting files opened in /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources. This is probably the speech dictionary, but they are all binary, except for Homophones, which is XML. Adding entries to Homophones does nothing - it is probably used in speech-to-text. They are also code signed by Apple - changing them may prevent some programs from working. PrefixDictionary CartNames CartLite SymbolDictionary Homophones There are ways to add text versions of application interface elements so VoiceOver works, a lot of which a developer gets for free, but there are tricky bits. The standard here appears to be to use a phonetic spelling as needed. My guesses are: say is a light layer of code on top of the Speech Synthesis Manager. It would be easy for the Apple devs to add a command line option to take the path to a speech dictionary plist for alternate phoneme mapping, but they didn't. It may be a useful open-source project to write a better say. Skype probably uses Speech Synthesis Manager directly, leaving no hooks to change the way my friend's names are pronounced, other than spelling them phonetically, which is silly. The easiest way to make a command line version of say is how JRobert suggested. Here's my quick implementation, using Doug Harris's spelling suggestion: #!/bin/sh echo $@ | tr '[A-Z]' '[a-z]' | sed "s/spolsky/spowlsky/g" | /usr/bin/say Finally, some fun command line stuff: # Apple is weird sqlite3 /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources/Tuples .dump # Get too much information about what files are being opened sudo dtrace -n 'syscall::open*:entry { printf("%s %s",execname,copyinstr(arg0)); }' # Just fun say -v bad "Joel Spolsky Spolsky Spolsky Spolsky Spolsky, Joel Spolsky Spolsky Spolsky Spolsky Spolsky" echo "scale=1000; 4*a(1)" | bc -l | say

  Read the article

• Firefox can't establish a connection to the server at www.google.com

  - by Tom

  My home page in Firefox [v4.0] and Internet Explorer [v9.0.8112.16421, Update Versions RTM (KB982861)] is currently set to Google but when I depress the quick start icon to start up either browser, I am getting the following immediate results: Unable to connect (In Firefox) Firefox can't establish a connection to the server at www.google.com. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. Internet Explorer cannot display the webpage What you can try: Diagnose Connection Problems More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. There might be a typing error in the address. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds: Click the Favorites button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages): Press Alt, click File, and then click Work Offline. Click the Favorites button, click History, and then click the page you want to view. Thankfully, I am able to use one browser that I have installed on my computer (Mathon v3.0.20.5000) to search online for technical assistance in this matter. I have seen several WinSock error issues mentioned; but, they are pointing to Windows XP and I am using Windows 7 Pro and remain uncertain whether anything identified as a fix for one OS will work in another. Things I've tried: HiJackThis Complete scan with Avira AntiVirus Premium. What am I overlooking? What should I do to address this problem?

  Read the article

• Getting an boot error when starting computer

  - by Rob Avery IV

  I was in the middle of watching a movie on Netflix, then suddenly everything started crashing. First, explorer.exe closed down, then Google chrome. I had multiple things running in the background (Steam, Raptr, etc.). Individuality, each of those apps closed down also. When they did, a small dialog box popped up for each of them, one at a time, saying that it was missing a file, it couldn't run anymore, or something similar to that. It also had some jumbled up "code" with numbers and letters that I couldn't read. Ever since then, everytime I turn my computer on, it will run for a few seconds and give this error "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". No matter how many times I try to reboot it, it always gives me the same error. A day later after this happened I was able to start the computer, but before it booted, it told me that I didn't shut down the computer properly and asked how I wanted to run the OS (Run Windows in Safety Mode, Run Windows Normally, etc.). Once I logged, everything went SUPER slow and everything crashed almost instantly. The only thing I opened was Microsoft Security Essentials and only got in about two clicks before it was "Not Responding". Then, after that the whole computer froze and I had to restart it. Now, it's back to saying what it originally said, "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". I built this PC back in February 2012. Here are the specs: OS: Windows 7 Ultimate CPU: AMD 8-core GPU: Nvidia GTX Force 560 Ti RAM: 16GB Hard Drive: Hitachi Deskstar 750GB I'm usually very good taking care of my PC. I don't download anything that's not from a trusted site or source. I don't open up any spam email or such or go to any harmful websites like porn or stream movies. I am very clean with the things I do with my PC and don't do many DIFFERENT things with it. I use it pretty often especially for video games and doing homework in Eclipse. Also, good to note that I don't have any Norton or antisoftware installed. I have Microsoft Security Essentials installed but never did a scan. Thanks!

  Read the article

• Do these 3 crashes have something in common?

  - by David U

  I'm running OS X 10.6.8 on a Mac Mini. I tried to install 3 applications today and all 3 installations failed. I am wondering if the failures have something in common. First I installed GraphViz. The installation succeeded, but when I try to open any .dot file, I get a dialog that says GraphViz has quit unexpectedly. Next I installed Doxygen. It installed, but when I try to launch it I get a dialog that tells me Doxywizard quit unexpectedly. After some googling I thought perhaps my system lacked QT, and that was the problem. I downloaded the Qt 4.8.4 packages and installed them. But when I try to launch qtdemo.app, or any of the other apps that came with the qt installation, I get a dialog that says I can't open the app because it's not supported on this type of Mac. I have crash logs from GraphViz and Doxygen. They're long and I think it unnecessary to post them unless they would help someone determine my problem. Thanks Excerpt from System Log, added later: 12/13/12 5:26:21 PM [0x0-0x4f04f].com.apple.DiskImageMounter[1322] 2012-12-13 17:26:21.927 DiskImages UI Agent[1333:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:30:31 PM [0x0-0x1a01a].org.mozilla.firefox[824] [ConvConfHandler] isPreferred contentType: application/x-apple-diskimage 12/13/12 5:35:32 PM DiskImages UI Agent[1384] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:35:32 PM [0x0-0x5a05a].com.apple.DiskImageMounter[1376] 2012-12-13 17:35:32.988 DiskImages UI Agent[1384:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 6:07:33 PM DisplayLinkUserAgent[772] (00116500.405)-[DLDistributedNotificationCenter stream:handleEvent:] reconnected. 12/13/12 6:07:33 PM [0x0-0x6c06c].backupd-helper[1446] Not starting Time Machine backup after wake - less than 60 minutes since last backup completed. 12/13/12 6:08:43 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/BrotherPPD.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Patch-2-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.5-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/PIXMA iP6000D 290.pkg 12/13/12 6:14:39 PM com.apple.launchd.peruser.501[359] ([0x0-0x70070].com.att.graphviz[2047]) Job appears to have crashed: Bus error 12/13/12 6:14:41 PM ReportCrash[2056] Saved crash report for Graphviz[2047] version 2.28 (2.28.0) to /Users/duzzell/Library/Logs/DiagnosticReports/Graphviz_2012-12-13-181441_Amun.crash 12/13/12 6:15:19 PM com.apple.launchd.peruser.501[359] ([0x0-0x74074].org.doxygen[2070]) Job appears to have crashed: Bus error 12/13/12 6:15:19 PM ReportCrash[2056] Saved crash report for Doxywizard[2070] version 1.8.2 (???) to /Users/duzzell/Library/Logs/DiagnosticReports/Doxywizard_2012-12-13-181519_Amun.crash

  Read the article

• What the best way to recover from when your RAID H/W incorrectly thinks a disk is missing

  - by Software Monkey

  I have a Windows 7 system with an MSI motherboard (running the latest AMD BIOS) and two of my four disks (not the system boot disk) configured via the Mobo as RAID-1. After a normal system restart today, the RAID BIOS reports that one of the two drives has been disconnected or has failed. It's not really failed; via recovery tools I can verify that if I take the BIOS out of RAID mode. But I can find no way to re-add the second hard disk to the array and rebuild via the BIOS - the only option seems be to delete the array and recreate it, but I've done that once before and it blows away the disk. It's done this once before, however on a subsequent reboot after double-checking the drive cabling (but not changing anything) and it boot up fine. So I think the mobo RAID is a little bit flaky. At this point I would like to remove the RAID drivers, change to AHCI mode and switch over to using a Windows 7 dynamic mirror disk. But the RAID drivers seem somehow deeply bound into the Windows startup - I can't find anything like the good ol' safe-mode in Windows 7. If I boot from the Win 7 install disk in ACHI mode I can use recovery tools to log in to the Windows 7 installation, so the boot drive it seems fine with ACHI mode. Additionally, I can see all my other disks, run chkdsk on them and they seem to be fine. If I try to boot from the HDD in AHCI mode, it just reboots part way through, presumably because the RAID drivers load and conflict with the BIOS being set to AHCI. So: How do I strip the RAID drivers from my Win 7 installation? If I delete the RAID logical disk, will it really delete partitioning information, or is that just a poorly worded message when it says the data on the disk will be deleted? If I disconnect the 2 disks in a RAID array, then delete the logical disk array, and then reconnect and reboot still in RAID mode, will the disks simply revert to RAID single-disks like my other 2 and then maybe I can leave windows with RAID drivers by operate the disks as singles with 2 of them in a Windows dynamic disk mirrored setup? Does Windows 7 have anything like the Windows XP Repair Install, where it will reinstall the O/S binaries from CD, but leave apps and setup alone. I am really hoping I don't have to do a complete reinstall of Windows 7 - the last one, when I upgraded from XP, took me two days to get everything set up and installed.

  Read the article

• MySQL timeout only from office network to remote server, but other connections are fine

  - by Adam

  I've been developing these apps just fine on a local machine as has my co worker. We recently moved our work desks so we're now on a different floor of the building, but we only have one router that we're connected to. Since then, connecting to this one server appears to timeout more often than not. Occasionally I get through, and the loading is instantaneous. Anyhow we have these connections that were tested 1. my computer -> office network -> php pdo -> mysql server A - timeout 2. my computer -> office network -> mysql cli -> mysql server A - timeout 3. my computer -> office network -> mysql cli -> mysql server A - timeout 4. another pc -> office network -> mysql cli -> mysql server A - timeout 5. my computer -> mobile network -> mysql cli -> mysql server A - ok 6. my computer -> office network -> ssh server A -> mysql server A - ok 7. my computer -> office network -> ssh server B -> mysql server A - ok 8. server B web app -> php pdo -> mysql server A - ok 9. my computer -> office network -> php pdo -> mysql server B - ok 10. my computer -> office network -> mysql cli -> mysql server B - ok This has really stumped me.

  Read the article

• Excessive Outbound DNS Traffic

  - by user1318414

  I have a VPS system which I have had for 3 years on one host without issue. Recently, the host started sending an extreme amount of outbound DNS traffic to 31.193.132.138. Due to the way that Linode responded to this, I have recently left Linode and moved to 6sync. The server was completely rebuilt on 6sync with the exception of postfix mail configurations. Currently, the daemons run are as follows: sshd nginx postfix dovecot php5-fpm (localhost only) spampd (localhost only) clamsmtpd (localhost only) Given that the server was 100% rebuilt, I can't find any serious exploits against the above stated daemons, passwords have changed, ssh keys don't even exist on the rebuild yet, etc... it seems extremely unlikely that this is a compromise which is being used to DoS the address. The provided IP is noted online as a known SPAM source. My initial assumption was that it was attempting to use my postfix server as a relay, and the bogus addresses it was providing were domains with that IP registered as their nameservers. I would imagine given my postfix configuration that DNS queries for things such as SPF information would come in with equal or greater amount than the number of attempted spam e-mails sent. Both Linode and 6Sync have said that the outbound traffic is extremely disproportionate. The following is all the information I received from Linode regarding the outbound traffic: 21:28:28.647263 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647264 IP 97.107.134.33 > 31.193.132.138: udp 21:28:28.647264 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647265 IP 97.107.134.33 > 31.193.132.138: udp 21:28:28.647265 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647266 IP 97.107.134.33 > 31.193.132.138: udp 6sync cannot confirm whether or not the recent spike in outbound traffic was to the same IP or over DNS, but I have presumed as such. For now my server is blocking the entire 31.0.0.0/8 subnet to help deter this while I figure it out. Anyone have any idea what is going on?

  Read the article

• Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

  - by CapBBeard

  Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

  Read the article

• Keep source IP after NAT

  - by John Miller

  Until today I used a cheapy router so I can share my internet connection and keep a webserver online too, while using NAT. Users IP ($_SERVER['REMOTE_ADDR']) was fine, I was seeing class A IPs of users. But as traffic grown up everyday, I had to install a Linux Server (Debian) to share my Internet Connection, because my old router couldn't keep the traffic anymore. I shared the internet via IPTABLES using NAT, but now, after forwarding port 80 to my webserver, now instead of seeing real users IP, I see my Gateway IP (Linux Internal IP) as any user IP Address. How to solve this issue? I edited my post, so I can paste the rules I'm currently using. #!/bin/sh #I made a script to set the rules #I flush everything here. iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -F iptables -X # I drop everything as a general rule, but this is disabled under testing # iptables -P INPUT DROP # iptables -P OUTPUT DROP # these are the loopback rules iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # here I set the SSH port rules, so I can connect to my server iptables -A INPUT -p tcp --sport 513:65535 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 --dport 513:65535 -m state --state ESTABLISHED -j ACCEPT # These are the forwards for 80 port iptables -t nat -A PREROUTING -p tcp -s 0/0 -d xx.xx.xx.xx --dport 80 -j DNAT --to 192.168.42.3:80 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p tcp -s 192.168.42.3 --sport 80 -j ACCEPT # These are the forwards for bind/dns iptables -t nat -A PREROUTING -p udp -s 0/0 -d xx.xx.xx.xx --dport 53 -j DNAT --to 192.168.42.3:53 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p udp -s 192.168.42.3 --sport 53 -j ACCEPT # And these are the rules so I can share my internet connection iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0:1 -j ACCEPT If I delete the MASQUERADE part, I see my real IP while echoing it with PHP, but I don't have internet. How to do, to have internet and see my real IP while ports are forwarded too? ** xx.xx.xx.xx - is my public IP. I hid it for security reasons.

  Read the article

• Routing all data through an VPN tunnel with ppp

  - by Oliver

  I'm trying to create a VPN tunnel that forwards all data from the local machine to the VPN server. I'm using ppp-2.4.5 for this with the following configuration: pty "pptp <VPNServer> --nolaunchpppd" name <my login name> remotename PPTP usepeerdns require-mppe-128 file /etc/ppp/options.pptp persist maxfail 0 holdoff 5 I have a script in if-up.d with the following content: route del default eth0 route add default dev ppp0 Before starting the VPN tunnel my routing looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 2 0 0 eth0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 After starting the tunnel (via pon) it looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 12.34.56.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 Now the problem is, that the VPN tunnel seems to be looped into itself. If I run ifconfig after a few seconds without any traffic: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.10 netmask 255.255.0.0 broadcast 192.168.255.255 ether 00:01:2e:2f:ff:35 txqueuelen 1000 (Ethernet) RX packets 39931 bytes 6784614 (6.4 MiB) RX errors 0 dropped 90 overruns 0 frame 0 TX packets 34980 bytes 7633181 (7.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xfbdc0000-fbde0000 ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496 inet 12.34.56.78 netmask 255.255.255.255 destination 12.34.56.1 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 7 bytes 94 (94.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 782863 bytes 349257986 (333.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 It states that already over 300 MiB have been send, ppp0 is only online since a few seconds and the connection isn't working anyway. Can someone please help me to fix the routing table, so that the traffic from ppp0 is not send again through ppp0 but instead goes to the remote server?

  Read the article

• I want to virtualize my workstation (Tier 1), Looking for Bare Metal Hypervisor for consumer grade components

  - by Chase Florell

  I find myself in this similar bind at least once a year. The bind whereby I'm either upgrading a motherboard, or an OS hard drive. It drives me crazy to have to reinstall Windows, Visual Studio, all my addins, reconfigure my settings etc... every single time. I have a layout and I like and I want to stick with it. My question is... Is there a Bare Metal Hypervisor on the market that will enable me to virtualize my consumer grade workstation? I really want to avoid Host/Client virtualization. Bare Metal is definitely a better way to go for my needs. Is this a good approach, or am I going to suffer some other undesirable side effects by doing this? Clarification My machine has very limited purposes. My primary use is Visual Studio 2010 Professional where I develop ASP.NET MVC Web Applications. The second piece of software that I use (that's system intensive) is Photoshop CS3. Beyond that, my applications are limited to Outlook, Internet Explorer, Firefox, Opera, Chrome, LinqPad, and various other (small) apps. Beyond this, I'm considering working on a node.js project and might run ubuntu on the same hypervisor if possible. System Specs: Gigabyte Motherboard Intel i7 920 12 GB Ram basic 500GB 7200RPM HDD for OS 4 VelociRaptors in Raid 1/0 for build disk Dual GTS250 (512MB) Graphics cards (non SLI) for quad monitors On a side note I also wouldn't be opposed to an alternative suggestion if the limitations are too great. I could install the ESXi (or Zen Server) on my box, and build a separate "thin client" to RDP into the virtual machine. It appears as though RDP supports dual monitors. Edit (Dec 9, 2011) It's been nearly a year since I first asked this question. Since then, there have been a lot of great strides in Hypervisor technology... AND MokaFive is now released for corporate use. I'd love to dig into this question a little more and find out if there is a solid BareMetal Hypervisor for workstations running consumer grade components (IE: not Dell, HP, Lenovo, Etc).

  Read the article

• Ubuntu stopped recognizing my iPod

  - by flashnode

  Rythmbox on Ubuntu 10.10 used to recognize my 3rd gen Nano and transfer mp3s. Now I plug it in and Ubuntu doesn't pop-up that box that asks what you want to do anymore. It is only recognized if I reboot and the thing is plugged in. Here is the output to 'lsusb -v -s bus:device' Bus 001 Device 008: ID 05ac:1262 Apple, Inc. iPod Nano 3.Gen Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05ac Apple, Inc. idProduct 0x1262 iPod Nano 3.Gen bcdDevice 0.01 iManufacturer 1 Apple Inc. iProduct 2 iPod iSerial 3 000A27001A670128 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 149 bNumInterfaces 3 bConfigurationValue 2 iConfiguration 4 iPod USB Interface bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 30 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Microphone bAssocTerminal 2 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 1 bSourceID 1 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 2 bDelay 1 frames wFormatTag 1 PCM AudioStreaming Interface Descriptor: bLength 35 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 9 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 11025 tSamFreq[ 2] 12000 tSamFreq[ 3] 16000 tSamFreq[ 4] 22050 tSamFreq[ 5] 24000 tSamFreq[ 6] 32000 tSamFreq[ 7] 44100 tSamFreq[ 8] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioControl Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0 Undefined Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 208 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 2 Device Status: 0x0000 (Bus Powered) This ubuntu forum told me to check the automount settings under /apps/nautilus/preferences/media_automount_open in gconf-editor. And I did that. Any clues?

  Read the article

• SQL Server database filled the hard drive and freeing up space isn't possible

  - by Jon

  I have a database in SQL Server 2008 on a 1Tb hard drive and it filled the drive, there is only 4Kb free. The MDF file is 323Gb and the LDF is 653Gb. The hard disk this DB is on has no other files on it other than the MDF and LDF so it's impossible to free up any space on the drive. The main hard disk is smaller but there is enough room to transfer the MDF to that drive, in case that helps. This server is overseas at a customer site and it's not possible at the moment to add more disk space to the server. It's also not possible to delete any records because the DB is in a failed mode (due to no disk space) and it doesn't respond to most commands. The Db is currently in full recovery mode which is why the LDF file is so large. This DB really doesn't need to be in full recovery so going forward we plan on switching it to simple mode which will save us a lot of space. I also don't care about losing the LDF file, but I need all of the data. I've spent a lot of time looking for a way out of this problem but everything I've found first involves either freeing up disk space or adding more disk space, neither of which is an option at this time. I'm stuck and any help would be greatly appreciated. I get the following log when trying to switch the DB to online mode. Msg 945, Level 14, State 2, Line 3 Database 'DBNAME' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Msg 5069, Level 16, State 1, Line 3 ALTER DATABASE statement failed. Msg 1101, Level 17, State 12, Line 3 Could not allocate a new page for database 'DBNAME' because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. I've found the following solutions but none work due to having no disk space on that drive, and since the DB is in a failed state I can't run most commmands. - DBCC SHRINKFILE - can't be run because doing a 'use DBNAME' fails - Detaching the DB and then changing the location of the MDF/LDF files, this fails because the DB is in an offline mode so you can't run detach. I'm at a loss about what else to try. Thanks.

  Read the article

• PHP versions warning on Plesk 11.0.9 upgrade on CentOS server

  - by Pixman

  I have a server turning on Plesk 10.4.4 and I want to upgrade it to 11.0.9. When I use the online upgrade tool, I have this warning: Parallels Panel pre-upgrade check... WARNING: You have a mixed set of 'php' and 'php53' packages installed. Installation or upgrade may fail or produce unexpected results. To resolve this issue run "sed -i.bak -e '/^\s*skip-bdb\s*$/d' /etc/my.cnf ; yum update 'php*' 'mysql*'". PHP Warning: Directive 'safe_mode' is deprecated in PHP 5.3 and greater in Unknown on line 0 I have run the code in ssh, but nothing changes. I have already searched all package names with "php", and I have this list: # yum list installed | grep php php-common.i386 5.3.13-5.el5.art installed php-pear.noarch 1:1.4.9-8.el5 installed php5-ioncube-loader.i386 4.0.7-11062118 installed php53.i386 5.3.3-13.el5_8 installed php53-cli.i386 5.3.3-13.el5_8 installed php53-devel.i386 5.3.3-13.el5_8 installed php53-gd.i386 5.3.3-13.el5_8 installed php53-imap.i386 5.3.3-13.el5_8 installed php53-mbstring.i386 5.3.3-13.el5_8 installed php53-mcrypt.i386 5.3.3-1.el5 installed php53-mysql.i386 5.3.3-13.el5_8 installed php53-pdo.i386 5.3.3-13.el5_8 installed php53-sqlite2.i386 5.3.2-11041315 installed php53-xml.i386 5.3.3-13.el5_8 installed psa-appvault-phpads.noarch 2.0.8-8203520080409011611 installed psa-appvault-phpbb.noarch 3.0.0-8200820080409011626 installed psa-appvault-phpbook.noarch 1.50-8203220080409011638 installed psa-appvault-phpbugtracker.noarch 1.19-8203820080416050605 installed psa-appvault-phpdig.noarch 1.85-8203120080409011645 installed psa-appvault-phpmoney.noarch 1.3-8204320080409011649 installed psa-appvault-phpmyfamily.noarch 1.4.1-8203420080409011655 installed psa-appvault-phpmyvisites.noarch 2.3-8202820080409011701 installed psa-appvault-phprojekt.noarch 5.2-8200820080409011713 installed psa-appvault-phpsurveyor.noarch 0.98-8204320080409011723 installed psa-appvault-phpwebsite.noarch 0.10.2-8203420080409011738 installed psa-appvault-phpwiki.noarch 1.3.11-8204320080409011808 installed psa-php53-configurator.i386 1.6.1-cos5.build1013111101.14 installed After verification in the Plesk file: panel_preupgrade_checker.php I think the warning is due to these lines: (from : panel_preupgrade_checker.php) foreach ($packages as $package) { $name = $package['name']; $hasPhp5 |= ($name == 'php' || strpos($name, 'php-') === 0); $hasPhp53 |= (strpos($name, 'php53') === 0); } Now, I think the problem is just due to the names of theses packages: php-common.i386 5.3.13-5.el5.art installed php-pear.noarch 1:1.4.9-8.el5 installed Can you help me to resolve this situation?

  Read the article

• How to temporary disable a mirror video driver in windows xp registry

  - by happy clicker

  Because its a lot of text, I will ask first my question and then explain what the base problem is. Perhaps someone can give me a solution to the base problem: Is there is a way to temporary disable mirror video drivers (through registry or so), without uninstalling the corresponding software. I tested changing the enumeration in LocalMachine\Hardware\DeviceMap\Video but after reboot always the old configuration is restored. Explanation of the base problem We are working on a wpf-project for a department of a big company. There we have the problem that WPF renders only in software mode, although the hardware they have, must support hardware rendering (Tier 2). After searching for a solution to the problem, we found out that direct 3d does not work properly and we think thats why WPF can only use SW-rendering. In dxdiag.exe the direct3d-acceleration is enabled, but if we start the test-routine it always fails saying that it has not enough memory (it says memory, not video memory!). I have seen there 3 different types of pc’s (they have some hundreds of each type) and every type shows the exactly same behavior. We tried to update all the drivers, also dx (Version 9.0c) and we searched a lot in the web but could not find a solution. All the pcs have Intel Dual-Core processors or better, one type has an Intel gma 9000 graphics card the other two types have actual ATI and NVidia graphic-cards with 256MB onboard memory. Also the system memory is at least 2GB. Windows is XPSP3. The pc’s are of two different manufacturers. Because we see the exactly same behavior on every computer of this three very different computer-types, we don’t think that this is a driver or a direct x problem. What we’ve found in other newsgroups is, that direct x could be disturbed through mirror-video drivers such as NetMeeting, VNC and other remote desktop-installations. In the registry, we see under LocalMachine\Hardware\DeviceMap\Video a lot of such mirror-entries and we find also the definitions in the CurrentControlSet\Control\Video-Section (However this drivers are not shown in the hardware panel of the os). We can have admin-rights to one of these computers to test if disabling these drivers would help, but we must not change the configuration so that some software does not work after the tests. Therefore I cannot uninstall any software because I have not the mediums, licenses or knowhow to reinstall those apps. The support of this company however will only begin to work, if I can tell them what the real problem is. Thats why we search for a way to disable these mirror-drivers (or a hint to solve the dx problem if we are on a false trace)

  Read the article

• Second HDD not seen by Windows 7 on Dell Xps l501x

  - by George

  I have a Dell XPS Laptop (l501x). I have replaced the original Seagate 500GB hard drive with an SSD Intel 320 120GB when I first purchased it a year ago. It's been working great. The laptop is booting in about 23 seconds, so the SSD is great. I have an Acronis image created that I came back to every three months just to keep everything clean. The SSD is partitioned with one logical drive for my data. So, recently I thought since I am not using my optical drive often enough to swap it out with a HDD caddy and add my seagate 500gb hard drive. I ordered the caddy placed the HDD in it and now load Windows. It just hangs on the screen that should show the Windows logo. I have tried everything that I know and searched it online. I have uninstalled the SATA controller AHCI and let Windows install it. Still will not boot into windows. I wanted to mention that the Seagate 500GB drive was the one that came with my laptop before I switched to the Intel SSD. As you know Intel has this application called Intel Rapid Technology which loads once in a while and shows the second hard drive, but then, when I restart it hangs again and Windows will not load. As soon as I remove the HDD Caddy and restart it loads Windows fine. I also formated the Seagate 500GB HDD in NTFS and still Windows will not load. When I go into the BIOS it shows the Fixed SSD and also "Sata ODD 500GB" instead of the optical drive but it will not boot into Windows when the HDD caddy is present. There is nothing wrong with the caddy. I have another laptop (Asus) and I installed the HDD caddy and Windows 7 loads without any glitch. I don't get it. I have also flashed the BIOS because Dell had a new version (A08). I also wanted to add that I refreshed Disk Management and the Device Manager and the second drive does not display. At this point I think it's a Windows issue so before I reinstall Windows 7 Home Premium from scratch I wanted to see if there was anything I was missing. Any advice would be greatly appreciated.

  Read the article

• Single line diff

  - by Ollie Saunders

  Is there a diff tool I can run from the command line or maybe just an online webpage that will compare single lines? GitHub diffs do this but I'm don't want to publish things to GitHub just to read the diffs! This is the sort of thing I'm wanting to diff: a:2:{i:0;O:10:"FuTreeNode":6:{s:5:"outer";r:2;s:6:"inners";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:2;s:5:"items";a:0:{}}s:5:"value";s:3:"foo";s:4:"next";O:10:"FuTreeNode":6:{s:5:"outer";r:2;s:6:"inners";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:8;s:5:"items";a:0:{}}s:5:"value";s:3:"bar";s:4:"next";N;s:4:"prev";O:10:"FuTreeNode":6:{s:5:"outer";N;s:6:"inners";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:15;s:5:"items";a:0:{}}s:5:"value";s:3:"zim";s:4:"next";r:8;s:4:"prev";O:10:"FuTreeNode":6:{s:5:"outer";N;s:6:"inners";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:22;s:5:"items";a:0:{}}s:5:"value";s:3:"foo";s:4:"next";r:15;s:4:"prev";r:8;s:6:"ofList";O:12:"FuLinkedList":1:{s:5:"items";a:4:{i:0;r:2;i:1;r:8;i:2;r:22;i:3;r:15;}}}s:6:"ofList";r:30;}s:6:"ofList";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:2;s:5:"items";a:2:{i:0;r:2;i:1;r:8;}}}s:4:"prev";N;s:6:"ofList";r:37;}i:1;r:8;} a:2:{i:0;O:10:"FuTreeNode":6:{s:5:"outer";r:2;s:6:"inners";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:2;s:5:"items";a:0:{}}s:5:"value";s:3:"foo";s:4:"next";O:10:"FuTreeNode":6:{s:5:"outer";r:2;s:6:"inners";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:8;s:5:"items";a:0:{}}s:5:"value";s:3:"bar";s:4:"next";N;s:4:"prev";O:10:"FuTreeNode":6:{s:5:"outer";N;s:6:"inners";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:15;s:5:"items";a:0:{}}s:5:"value";s:3:"zim";s:4:"next";r:8;s:4:"prev";O:10:"FuTreeNode":6:{s:5:"outer";N;s:6:"inners";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:22;s:5:"items";a:0:{}}s:5:"value";s:3:"foo";s:4:"next";r:15;s:4:"prev";r:8;s:6:"ofList";O:12:"FuLinkedList":1:{s:5:"items";a:4:{i:0;r:2;i:1;r:8;i:2;r:22;i:3;r:15;}}}s:6:"ofList";r:30;}s:6:"ofList";O:20:"FuLinkedTreeNodeList":2:{s:5:"outer";r:2;s:5:"items";a:2:{i:0;r:2;i:1;r:8;}}}s:4:"prev";N;s:6:"ofList";r:37;}i:1;r:22;} I'm on Mac OS X.

  Read the article

• Recovering data from failed Raid configuration with 4 drives and two raid sets (Asus P6T / Intel ICH10r)

  - by user56365

  I've added the complete detailed version for my question below for those who can help, but want to quickly summarize my question first. I setup two Raid arrays using (4) WD Raptors, a striped set for the OS and 1+0 set for crucial data. After booting once out of the 50 times a cable fell out, the drive wasn't recognized in the array anymore. After trying to fix it, another drive did the same. I now have two drives remaining, luckily with the parity information. I know the striped set is gone, but I need the data on the other set. Can anyone recommend anything to recover the data, or fix the two drives that doesn't allow the raid controller to recognize the drives, even though they are listed on the utility screen as still apart of the configuration but that they are not found? More Details I recently upgraded to a ASUS P6T motherboard with an Intel ICH10R raid controller and changed my previous 4 drive raid array from strictly a Raid 1+0 set to a Raid 0 for the OS/Page/Scratch drive and a Raid 1+0 set for crucial data. I never had problems after upgrading with my configuration, even when a drive died and was replaced. I managed to rebuild the array fine. Unfortunately this time around, a cable came unattached and I booted my system up until the raid status screen with the degraded error. This shouldn't have been a problem, but after I attached the drive it was no longer recognized as a member in the array. Both drives actually show up as a non-member disk. I've spent a very, very long time online trying to find information or support and haven't had much luck. After spending time trying to scan the drive for errors, damaged partition info, etc.. another drive in the set decided it didn't want to be recognized as a part of the array. At this point, I have two out of the four drives still functioning, but the Raid 1+0 array went from degraded to failed and I must find a way to retrieve that data. I think the two drives still in the array have the parity information because they show up as OS (110GB),BACKUP(80GB) and OS:1(110GB),BACKUP(80GB) under windows data management. The other two are simply 74gb Raw unallocated Is it possible recover the data using those two drive only, and which tool would I use? Could it be a simple partition table or any other error that is repairable with hard drive utilities out there? I know the Raid 0 set is done for, but I would assume because the correct drives failed in a 1+0 config to save the data I can retrieve it some how.

  Read the article

• Triple (3) Monitors under Linux

  - by widgisoft

  I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

  Read the article

• How can I create an appointment on a shared Outlook calendar

  - by roryhewitt

  This isn't as basic a question as it may seem. Hence all the descriptive text... I and my team use Outlook 2007. I have my own personal calendar and also I share a calendar with others in my team (which is mainly used to notify everyone of vacations etc.). The others in my team are NOT technical people. I would like to create a shortcut or template that any of us can use to create an appointment in the shared calendar. My initial though was to create a new appointment, but rather than actually put it in the calendar, I would save it as an Outlook Template (.oft) file. Once created, I would send this to my team and tell them to put it in their Templates file and put a shortcut on their desktop. Then, if they want to put a vacation in the shared calendar, they just double-click on the shortcut, change the dates etc. and then save & close it. However, when I do that, it doesn't save the fact that it's an appointment on the shared calendar - it just adds the appointment to the team member's personal calendar. There doesn't seem to be a way to specify a calendar in the template. I've also tried this by saving the template as a .ics or .vcs file, with no better luck. Additionally, if a team member adds an appointment to the shared calendar, other 'sharees' aren't notified, unless the appointment is actually created as a meeting and the other sharees are explicitly invited. I found this online (http://office.microsoft.com/en-us/outlook-help/keep-everyone-informed-about-time-away-from-the-office-HA010209819.aspx) which APPEARS to say that what I want to do isn't built in functionality (since it shows a bunch of steps to go through. I'd PREFER not to have to add this stuff to everyone else's personal calendar directly. So... Is this possible to do, natively (i.e. directly in Outlook)? Would a Sharepoint calendar make more sense and allow this functionality? Is there a way to do what I want which will allow the other team members to be notified? Like I said, I'm looking for as simple an interface as possible - these people aren't going to want to do much more than open something and change dates. Additionally, they're probably not going to have any fancy software on their PC's, although they will be up to date with Java and (maybe) .NET frameworks. Also, before anyone gets funny, yes, this has to work with Outlook 2007, as it's a corporate standard - we're not able to change that, even though e.g. Google Calendar would do this wonderfully. Obviously if this functionality is available in Outlook 2010, then fantastic - we might be able to upgrade. Thanks!

  Read the article

• What Sort of Server Setup Am I Likely to Need? - School A/V streaming

  - by DeathMagus

  My prior experience with servers has generally been limited to home file-sharing servers, low-traffic web-servers, and the like. This leaves me with the technical knowledge of how to set up a system, but little experience in terms of scaling said system. My current project, however, has me as the technical lead in setting up a school for online audio and video streaming. The difficulty I'm running into is that I don't quite have the experience to guess what they'll need, and they don't have the experience to tell me - so I've tried to ask as many pertinent questions about what they want to do with their server, and here's what I found out: About 1000 simultaneous users, and hoping to expand (possibly significantly) Both video and audio streaming, at obviously the highest quality possible Support for both live and playlist-based streaming. Probably only one channel, but as it's an educational opportunity, I imagine letting them have a few more wouldn't hurt. No word on whether they're locked into Windows or whether Linux is acceptable. Approximate budget - $7000. It may actually be about $2k less than this, because of a mishap with another technology firm (they ordered a $7000 DV tape deck for some reason, and now the company wants them to pay a 30% restocking fee). The tentative decisions I've already made: I'm planning on using Icecast 2 for my streaming server, fed by VLC Shoutcast encoding. Since the school already has a DMZ set up, I plan on placing the Icecast server in there, and feeding it through their intranet from a simple workstation computer in their studios. This system isn't in any way mission critical - it's an education tool (they're a media magnet school), so I figure redundancy is not worthwhile to them from a cost:benefit perspective. What I don't know is this: How powerful of a server will I need? What is likely to be my major throttle - bandwidth? How can I mitigate that? Will I need anything special for the encoding workstation other than professional video and audio capture cards and a copy of VLC? Are there any other considerations that I'm simply missing? Thanks a lot for any help - if there's more information you need, let me know and I'll tell you all I can.

  Read the article

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >