Search Results

Search found 33182 results on 1328 pages for 'linux port'.

Page 605/1328 | < Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >

• 13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

  - by user1898041

  Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

  Read the article

• Windows 7 - Ubuntu 10.10 Dual Boot Partitioning Recommendation for HP Laptop OEM

  - by Denja

  Hi Linux Community, After been temporary impressed with the newb Windows 7 and after intensly using it I find my self struggling with the ever slow and buggy windows OS once again. It's Time to go with the Ubuntu/Linux way for a better and faster tomorrow. Unfortunately in my country most Users/Business use Windows based Systems. As a Computer technician i want to learn and use both Systems and possibly introduce New users to more affordable Linux Based Systems. For now I want to create dual-boot or even triple boot layouts on my laptop machine Here's the layout in use now: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I want to make. * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows data partition (user files) NTFS - 60GB(Extended or Primary)(sda2);wanna share with Linux * Linux root Ext4 - 10GB (Primary)(sda3) * Linux swap swap- RAM size, 3GB (sda4) * Linux home Ext4- 164,9GB (Extended)(sda5) Question 1: Is the layout that i want to make correct as the Primary and Extended Partition concerns ? Question 2: Can I definitely get rid of SYSTEM Boot loader of windows? Question 3: If I get rid of HP_TOOLS and RECOVERY partition will it be a problem? Question 4: Based on my layout what is your suggestion for a Triple Boot layout for OSX or Puppy Linux? Thank you in advance for your advises and suggestions.

  Read the article

• Built-in network card not working?

  - by Zeeshan

  Hi, I am new to Ubuntu. I have installed Ubuntu 9.04(Jaunty). After installation I found that network card is not wokring. And id doest not list in "System Preferenes Network Connections" So , i got another card from my friend and try to search on internat about my problem but still cant find solution. Some commands output is here which may be help to solve problem root@mzeeshan-desktop:/home/mzeeshan# uname -r 2.6.28-11-generic root@mzeeshan-desktop:/home/mzeeshan# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:02:44:4a:45:12 inet addr:192.168.5.37 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::202:44ff:fe4a:4512/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3774 errors:0 dropped:0 overruns:0 frame:0 TX packets:3611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4307045 (4.3 MB) TX bytes:583067 (583.0 KB) Interrupt:22 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) pan0 Link encap:Ethernet HWaddr 5e:25:17:a1:18:ac BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@mzeeshan-desktop:/home/mzeeshan# lspci 00:00.0 Host bridge: Intel Corporation Device 0069 (rev 12) 00:01.0 PCI bridge: Intel Corporation Auburndale/Havendale PCI Express x16 Root Port (rev 12) 00:19.0 Ethernet controller: Intel Corporation Device 10f0 (rev 05) 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 06:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 06:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) root@mzeeshan-desktop:/home/mzeeshan# Motherboard is Intel DP55WG. I don't know what to do next. Any help will be greatly appreciated.. Thanks

  Read the article

• ubuntu mail server settings and /etc/hosts file

  - by mbrc

  This is my /etc/hosts file 127.0.0.1 localhost.localdomain localhost 127.0.1.1 ubuntu-server.xx.com ubuntu-server 193.77.xx.xx mail.xx.com mail # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters is this correct configuration for my mail server. I am behind router so i don't know if is ok to use my IP for mail.xx.com and 127.0.0.1 for localhost problem is that i can receive mail but when i send it i get Oct 17 21:29:32 ubuntu-server postfix/smtpd[2453]: warning: SASL authentication failure: Password verification failed Oct 17 21:29:32 ubuntu-server postfix/smtpd[2453]: warning: my.router[192.168.1.1]: SASL PLAIN authentication failed: authentication failure Oct 17 21:29:34 ubuntu-server postfix/smtpd[2453]: warning: my.router[192.168.1.1]: SASL LOGIN authentication failed: authentication failure EDIT: mabye is problem some port. i foward this ports. POP3 - port 110 IMAP - port 143 SMTP - port 25 HTTP - port 80 Secure SMTP (SSMTP) - port 465 Secure IMAP (IMAP4-SSL) - port 585 StartTLS - port 587 IMAP4 over SSL (IMAPS) - port 993 Secure POP3 (SSL-POP) - port 995 postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix content_filter = amavis:[127.0.0.1]:10024 delay_warning_time = 4h disable_vrfy_command = yes inet_interfaces = all inet_protocols = all mailbox_size_limit = 0 maximal_backoff_time = 8000s maximal_queue_lifetime = 7d message_size_limit = 0 minimal_backoff_time = 1000s mydestination = myhostname = mail.xx.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mynetworks_style = host myorigin = /etc/mailname readme_directory = no receive_override_options = no_address_mappings recipient_delimiter = + relayhost = smtp_helo_timeout = 60s smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.njabl.org smtpd_data_restrictions = reject_unauth_pipelining smtpd_delay_reject = yes smtpd_hard_error_limit = 12 smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_limit = 16 smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, permit smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_pipelining, permit smtpd_soft_error_limit = 3 smtpd_tls_cert_file = /etc/ssl/private/mail.xx.com.crt smtpd_tls_key_file = /etc/ssl/private/mail.xx.com.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes unknown_local_recipient_reject_code = 450 virtual_alias_maps = mysql:/etc/postfix/maps/alias.cf virtual_gid_maps = static:5000 virtual_mailbox_base = /var/spool/mail/virtual virtual_mailbox_domains = mysql:/etc/postfix/maps/domain.cf virtual_mailbox_limit = 0 virtual_mailbox_maps = mysql:/etc/postfix/maps/user.cf virtual_uid_maps = static:5000 saslfinger -c version: 1.0.4ostfix Cyrus sasl configuration Ä mode: client-side SMTP AUTH -- basics -- Postfix: 2.9.3 System: Ubuntu 12.04.1 LTS \n \l -- smtp is linked to -- libsasl2.so.2 => /usr/lib/i386-linux-gnu/libsasl2.so.2 (0x00d3a000) -- active SMTP AUTH and TLS parameters for smtp -- relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes -- listing of /usr/lib/sasl2 -- total 28 drwxr-xr-x 2 root root 4096 okt 14 15:18 . drwxr-xr-x 72 root root 12288 okt 14 15:03 .. -rw-r--r-- 1 root root 1 maj 4 06:17 berkeley_db.txt -rw-r----- 1 root root 701 okt 14 15:18 saslpasswd.conf -rw-r----- 1 smmta smmsp 885 okt 14 15:18 Sendmail.conf -- listing of /etc/postfix/sasl -- total 12 drwxr-xr-x 2 root root 4096 okt 11 18:55 . drwxr-xr-x 4 root root 4096 okt 12 06:59 .. -rwx------ 1 root root 241 okt 11 18:55 smtpd.conf Cannot find the smtp_sasl_password_maps parameter in main.cf. Client-side SMTP AUTH cannot work without this parameter!

  Read the article

• New keyboard for linux: Adesso Tru-Form or MS Natural Keyboard 4000?

  - by Andrea

  Hi folks! I'm going to buy a new ergonomic keyboard for my laptop. In the following, keep in mind I live in Italy. I considered the following models: Adesso PCK-308UB - Adesso Tru-Form™ Pro - Contoured Ergonomic Keyboard with TouchPad-PS2 Pro: has a built-in touchpad in the same position of my laptop somewhat cheaper than the alternative below Cons: the surface doesn't seem to be bowl-shaped. keys seem to lay on a straight slightly-inclined surface. It seems an idea used extensively in other ergonomic keyboards according to a few comments on the net, new Adesso keyboards seem to lack robustness, they're likely to loose small parts after a few weeks or months. Other users, instead, seem to never had any problem in years and swear by their quality and comfortability. Those who had problems, however, lamented a lack of responsiveness from the manufacturer. I'm not sure whether the keyboard, at least the standard keys, and the touchpad will both be recognized correctly under linux distros (I mostly use FC btw) last time I checked, Adesso didn't have local resellers in my country Microsoft Natural Ergonomic Keyboard Pro: recognized as one of the most comfortable keyboards reliable customer service operating in my country AFAIK there are several documented ways to get extra buttons work with linux Cons: it doesn't have a builtin touchpad and has a numeric keypad wasting space to reach mouse But there could be other keyboards I haven't considered yet, so here follows my ideal keyboard wishlist, ordered by priority linux compatible basic ergonomic design, which entails split tilted keyboard and pads advanced ergonomic design, like true-ergonomic's or kinesis , where special keys (like enter, caps-lock...) are placed symmetrically in the middle to be used by thumbs a builtin touchpad/trackball placed under the keyboard. I just love this on my notebook. I think it's pretty effective, since it allows my hand to rest naturally everytime I use it. Any opinion on this? high-quality switches, like cherry's (unsure about this one) additional programmable keys placed near usual ones, to simplify typing shortcuts TIA Andrea

  Read the article

• Why Does Ejabberd Start Fail?

  - by Andrew

  I am trying to install ejabberd 2.1.10-2 on my Ubuntu 12.04.1 server. This is a fresh install, and ejabberd is never successfully installed. The Install Every time, apt-get hangs on this: Setting up ejabberd (2.1.10-2ubuntu1) ... Generating SSL certificate /etc/ejabberd/ejabberd.pem... Creating config file /etc/ejabberd/ejabberd.cfg with new version Starting jabber server: ejabberd............................................................ failed. The dots just go forever until it times out or I 'killall' beam, beam.smp, epmd, and ejabberd processes. I've turned off all firewall restrictions. Here's the output of epmd -names while the install is hung: epmd: up and running on port 4369 with data: name ejabberdctl at port 42108 name ejabberd at port 39621 And after it fails: epmd: up and running on port 4369 with data: name ejabberd at port 39621 At the same time (during and after), the output of both netstat -atnp | grep 5222 and netstat -atnp | grep 5280 is empty. The Crash File A crash dump file is create at /var/log/ejabber/erl_crash.dump. The slogan (i.e. reason for the crash) is: Slogan: Kernel pid terminated (application_controller) ({application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}}) It's alive? Whenever I try to relaunch ejabberd with service ejabberd start, the same thing happens - even if I've killed all processes before doing so. However, when I killall the processes listed above again, and run su - ejabberd -c /usr/sbin/ejabberd, this is the output I get: Erlang R14B04 (erts-5.8.5) [source] [64-bit] [rq:1] [async-threads:0] [kernel-poll:false] Eshell V5.8.5 (abort with ^G) (ejabberd@ns1)1> =INFO REPORT==== 15-Oct-2012::12:26:13 === I(<0.478.0>:ejabberd_listener:166) : Reusing listening port for 5222 =INFO REPORT==== 15-Oct-2012::12:26:13 === I(<0.479.0>:ejabberd_listener:166) : Reusing listening port for 5269 =INFO REPORT==== 15-Oct-2012::12:26:13 === I(<0.480.0>:ejabberd_listener:166) : Reusing listening port for 5280 =INFO REPORT==== 15-Oct-2012::12:26:13 === I(<0.40.0>:ejabberd_app:72) : ejabberd 2.1.10 is started in the node ejabberd@ns1 Then, the server appears to be running. I get a login prompt when I access http://mydomain.com:5280/admin/. Of course I can't login unless I create an account. At this time, the output of netstat -atnp | grep 5222 and netstat -atnp | grep 5280 is as follows: tcp 0 0 0.0.0.0:5222 0.0.0.0:* LISTEN 19347/beam tcp 0 0 0.0.0.0:5280 0.0.0.0:* LISTEN 19347/beam ejabberdctl Even when it appears ejabberd is running, trying to do anything with ejabberdctl fails. For example: trying to register a user: root@ns1:~# ejabberdctl register myusername mydomain.com mypassword Failed RPC connection to the node ejabberd@ns1: nodedown I have no idea what I'm doing wrong. This happens on two different servers I have with identical software installed (really not much of anything). Please help. Thanks.

  Read the article

• Compiling NETGEAR WNR2000v3 firmware under 12.04.1 LTS

  - by Madmanguruman

  I'm trying to compile the GPL NETGEAR firmware for the WNR2000v3 router using Ubuntu 12.04.1 LTS. I've downloaded and extracted the source, installed everything I think I need, yet there are two build dependencies that I cannot resolve: > make menuconfig .... Build dependency: Please install ncurses. (Missing libncurses.so or ncurses.h) Build dependency: Please install zlib. (Missing libz.so or zlib.h) I've tried apt-getting all of the following packages: libncurses5 libncurses5:i386 libncurses5-dev zlib1g zlib1g-dev zlib1g-dbg The missing libs seem 'real': the target .so files aren't in /usr/lib, although the .h files are in /usr/include. EDIT: some Googling told me of broken or missing symlinks. I found the following: /lib/i386-linux-gnu/libncurses.so.5 -> libncurses.so.5.9 /lib/i386-linux-gnu/libncurses.so.5.9 /lib/i386-linux-gnu/libncursesw.so.5 -> libncursesw.so.5.9 /lib/i386-linux-gnu/libncursesw.so.5.9 /lib/i386-linux-gnu/libz.so.1 -> libz.so.1.2.3.4 /lib/i386-linux-gnu/libz.so.1.2.3.4 so I tried to symlink these to /usr/lib: /usr/lib/libncurses.so -> /lib/i386-linux-gnu/libncurses.so.5 /usr/lib/libz.so -> /lib/i386-linux-gnu/libz.so.1 but the project still complains about missing libncurses and zlib. EDIT: I was able to get the dependencies to work under 8.04. Need to cross-reference things now. Does anyone have some tips on how to debug this sort of issue?

  Read the article

• apt-get install kernel source error

  - by MA1

  apt-get source linux-image-$(uname -r) gives me the below error Reading package lists... Done Building dependency tree Reading state information... Done Picking 'linux' as source package instead of 'linux-image-3.0.0-12-generic' NOTICE: 'linux' packaging is maintained in the 'Git' version control system at: http://kernel.ubuntu.com/git-repos/ubuntu/ubuntu-oneiric.git Skipping already downloaded file 'linux_3.0.0-17.30.dsc' Need to get 99.9 MB of source archives. Err http://pk.archive.ubuntu.com/ubuntu/ oneiric-updates/main linux 3.0.0-17.30 (tar) 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Err http://pk.archive.ubuntu.com/ubuntu/ oneiric-updates/main linux 3.0.0-17.30 (diff) 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Failed to fetch http://pk.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux_3.0.0.orig.tar.gz 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administratorThe request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Failed to fetch http://pk.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux_3.0.0-17.30.diff.gz 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) E: Failed to fetch some archives. Can someone suggest a solution?

  Read the article

• Can windows XP be better than any Ubuntu (and Linux) distro for an old PC?

  - by Robert Vila

  The old laptop is a Toshiba 1800-100: CPU: Intel Celeron 800h Ram 128 MB (works ok) HDD: 15GB (works ok) Graphics adapter: Integrated 64-bit AGP graphics accelerator, BitBIT, 3D graphic acceleration, 8 MB Video RAM Only WindowsXP is installed, and works ok: it can be used, but it is slow (and hateful). I thought that I could improve performance (and its look) easily, since it is an old PC (drivers and everything known for years...) by installing a light Linux distro. So, I decided to install a light or customized Ubuntu distro, or Ubuntu/Debian derivative, but haven't been successful with any; not even booting LiveCDs: not even AntiX, not even Puppy. Lubuntu wiki says that it won't work because the last to releases need more ram (and some blogs say much more cpu -even core duo for new Lubuntu!-), let alone Xubuntu. The problems I have faced are: 1.There are thousands of pages talking about the same 10/15 lightweight distros, and saying more or less the same things, but NONE talks about a simple thing as to how should the RAM/swap-partition proportion be for this kind of installations. NONE! 2.Loading the LiveCD I have tried several different boot options (don't understand much about this and there's ALWAYS a line of explanation missing) and never receive error messages. Booting just stops at different stages but often seems to stop just when the X server is going to start. I am able to boot to command line. 3.I ignore whether the problem is ram size or a problem with the graphics driver (which surprises me because it is a well known brand and line of computers). So I don't know if doing a partition with a swap partition would help booting the LiveCD. 4.I would like to try the graphical interface with the LiveCD before installing. If doing the swap partition for this purpose would help. How can I do the partition? I tried to use Boot Rescue CD, but it advises me against continuing forward. I would appreciate any ideas as regards these questions. Thank you

  Read the article

• Where or what are the instructions for installing FMOD Ex for Linux to use in g++?

  - by Andrey

  I'm looking for the instructions on how to install FMOD. I want to do extra credit for my computer graphics assignment - sound effects. A teammate wants me to go with something simple, and he suggested that I use FMOD Ex. (If you guys can think of something better, do suggest it, but so far FMOD looks more promising compared to SDL, OpenAL, etc.) Right now I'm having a really hard time finding the instructions for installing the latest version of FMOD (audio content creation tool) on Linux Ubuntu 12.04 LTS (32-bit) so that I can use it in g++ with OpenGL. I checked out this YouTube video: http://www.youtube.com/watch?v=avGxNkiAS9g, but it's for Windows. Then, there is a Ubuntu Forums thread which redirected me to this page: https://wiki.debian.org/FMOD, and it has some dated instructions. I've downloaded FMOD Ex v. 4.44.24, which I believe is the latest version. Now I'm looking at eight files: libfmodex.so; libfmodex64.so; libfmodex64-4.44.24.so; libfmodex-4.44.24.so; libfmodexL.so; libfmodexL64.so; libfmodexL64-4.44.24.so; libfmodexL-4.44.24.so ... not knowing what to do. I've looked everywhere I could think of: StackOverflow, here, YouTube, Google, ... and came up with zilch. Please help. Thanks in advance.

  Read the article

• Bash script won't stay open in background after running through while

  - by jfreak53

  I can't get the following bash script to stay open after the first message is received from NC: #!/bin/bash port=3333 nc -l $port | while read msg; do notify-send Alert "$msg"; done After the first message it exits. I want it to stay open and continue monitoring for new messages from NC. I know that if I launch nc -l port without the while loop it stays open and I can chat away between the two connections even disconnect from the connected host. I am sending the message using: echo 'done' | nc IP port

  Read the article

• My card reader doesn't show up at all, but previously did in 10.10

  - by Nathan J. Brauer

  I bought a pin-based-USB powered internal media card reader and it worked perfectly when I first installed Ubuntu 10.10 a month ago. I used it a few times since and today I booted up the computer and it's not working. Here's how it used to work: In nautilus->computer, 5 "drives" would display even when no card was inserted. One for each slot (SD, XD, CF/MS, etc). Opening one w/o a card would initiate a "Please insert card." dialog. Inserting a card would automatically open nautilus. Now: No drives display at all whether cards are inserted or not. lsusb lists the following (which seems to indicate that it's not being detected) Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 046d:c52e Logitech, Inc. (my keyboard/mouse) Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub (A side note, all of my USB ports are 2.0 + 1 USB port which is 3.0, why does everything say 1.1/2.0?) I tried using ubuntu-bug but for USB devices it expects you to be able to remove and insert them while the computer is running -- obviously something you probably shouldn't be doing when you're dealing with devices plugged straight into the USB pins. Thanks in advance!

  Read the article

• Making files generally available on Linux system (when security is relatively unimportant)?

  - by Ole Thomsen Buus

  Hi, I am using Ubuntu 9.10 on a stationary PC. I have a secondary 1 TB harddrive with a single big logical partition (currently formatted as ext4). It is mounted as /usr3 with options user, exec in /etc/fstab. I am doing highspeed imaging experiments. Well, only 260fps, but that still creates many individual files since each frames is saved as one png-file. The stationary is not used by anyone other than me which is why the default security model posed by ubuntu is not necessary. What is the best way to make the entire contents of /usr3 generally available on all systems. In case I need to move the harddrive to another Ubuntu 9.x or 10.x machine? When grabbing image with the firewire camera I use a selfmade grabbing software-utility (console based) in sudo-mode. This creates all files with root as owner and group. I am logged in as user otb and usually I do the following when having to make files generally available to otb: sudo chown otb -R * sudo chgrp otb -R * sudo chmod a=rwx -R * This takes some time since the disk now contains individual ~200000 files. After this, how would linux behave if I moved the harddrive to another system where the user otb is also available? Would the files still be accessible without sudo use?

  Read the article

• How to cache authentication in Linux using PAM/Kerberos authentication (for CVS)?

  - by Calonthar

  We have several Linux servers that authenticate Linux user passwords on our Windows Active Directory Server using PAM and Kerberos 5. The Linux distro we use is CentOS 6. On one system, we have several Version Control Systems like CVS and Subversion, both of which authenticate users throug PAM, such that users can use their normal Unix resp. Windows AD accounts. Since we started using Kerberos for password authentication, we experienced that CVS on a client machine is often much slower in establishing a connection. CVS authenticates the user on every request (eg. cvs diff, log, update...). Is is possible to cache the credentials that kerberos uses, sucht that is does not need to ask the Windows AD server every time a user executes a cvs action? Our PAM config /etc/pam.d/system-auth looks like the following: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth sufficient pam_krb5.so use_first_pass auth required pam_deny.so account required pam_unix.so broken_shadow account sufficient pam_succeed_if.so uid < 500 quiet account [default=bad success=ok user_unknown=ignore] pam_krb5.so account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password sufficient pam_krb5.so use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_krb5.so

  Read the article

• Tell me why I should bother using Linux if it's all about problems getting the OS to install or work properly? [closed]

  - by Vilhjalmur Magnussin

  Why should I spend day's trying to get Ubuntu to either install and/or work properly? I'm using an Acer Timeline X laptop and if I install 10.04 the wireless doesn't work, and if I try installing 11.04 it either won't install, or if it installs it's full of bugs causing my computer to freeze all the time. So please, I'm all open ears. Someone give me one or two good reasons to continue wasting time (in hope it eventually works) before I decide to focus my time on other things like productivity (using Windows like I've been doing successfully the last 10 years). This is the second time I give Ubuntu a try, the first time was in 2010 using Ubuntu Studio and Ubuntu Desktop, and it ended with me shifting back to Windows since I had spent more time getting everything to work than actually working while trying Ubuntu. I really don't understand why it needs to be like this. Why go on trying when all I see is forums full of discussions about problems which people are having difficulties fixing. Or maybe there is just one special type of computer which works well with Linux? Would very much like to know which computer that is. SO please, if it's not to much trouble I really want to here from someone who has something good to say about going through all this trouble just to get a working environment up and running since I already have a working environment up and running called Windows. Thanks, Villi.

  Read the article

• Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 4)

  - by hinkmond

  And now here's the Java code that you'll need to read your ghost sensor on your Raspberry Pi The general idea is that you are using Java code to access the GPIO pin on your Raspberry Pi where the ghost sensor (JFET trasistor) detects minute changes in the electromagnetic field near the Raspberry Pi and will change the GPIO pin to high (+3 volts) when something is detected, otherwise there is no value (ground). Here's that Java code: try { /*** Init GPIO port(s) for input ***/ // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); for (String gpioChannel : GpioChannels) { System.out.println(gpioChannel); // Reset the port File exportFileCheck = new File("/sys/class/gpio/gpio"+gpioChannel); if (exportFileCheck.exists()) { unexportFile.write(gpioChannel); unexportFile.flush(); } // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); // Open file handle to input/output direction control of port FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for input directionFile.write(GPIO_IN); } /*** Read data from each GPIO port ***/ RandomAccessFile[] raf = new RandomAccessFile[GpioChannels.length]; int sleepPeriod = 10; final int MAXBUF = 256; byte[] inBytes = new byte[MAXBUF]; String inLine; int zeroCounter = 0; // Get current timestamp with Calendar() Calendar cal; DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd HH:mm:ss.SSS"); String dateStr; // Open RandomAccessFile handle to each GPIO port for (int channum=0; channum And, then we just load up our Java SE Embedded app, place each Raspberry Pi with a ghost sensor attached in strategic locations around our Santa Clara office (which apparently is very haunted by ghosts from the Agnews Insane Asylum 1906 earthquake), and watch our analytics for any ghosts. Easy peazy. See the previous posts for the full series on the steps to this cool demo: Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 1) Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 2) Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 3) Halloween: Season for Java Embedded Internet of Spooky Things (IoST) (Part 4) Hinkmond

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• How do I mount my Android phone?

  - by Amanda

  I'm puzzled because my phone used to just appear when I plugged it in. It doesn't anymore and The development options are definitely set to allow USB debugging. The phone is charging via USB but doesn't appear in lsusb [0 amanda@luna android-sdk-linux_86]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 17ef:4807 Lenovo UVC Camera Bus 003 Device 012: ID 413c:1003 Dell Computer Corp. Keyboard Hub Bus 003 Device 003: ID 08ff:2810 AuthenTec, Inc. AES2810 Bus 003 Device 013: ID 413c:2010 Dell Computer Corp. Keyboard Bus 003 Device 014: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus] adb devices -l shows nothing. In my Wireless and Network settings I changed the USB connection settings to "Mass storage" -- they were set to "Ask on connection" though I definitely wasn't getting asked. I don't get any Click here to connect via USB alert either. I'm not even sure whether the issue is my phone or my computer. It seems odd that it isn't even appearing in lsusb Not for nothing, the thumb drive on my keyring also does not appear in lsusb -- I've tried both in a bunch of different ports. I kind of assume the thumb drive is just borked, but it could be my OS.

  Read the article

• What "file system" is supported by Windows and Linux?

  - by Skiroid

  I'm setting up a media centre for my living room so that I'm able to watch downloaded films and TV shows on the big screen. The media centre is an old small computer which will have XBMCbuntu 12 installed on it. Right now, the media centre has a 300 GB HDD partitioned into two: 1) Ext4 50 GB (where I'll install the OS) 2) swap 6 GB (swap area) I'm wanting a third partition which I can store all my media on to. This partition will fill the rest of my HDD. Although, I'm stuck on which file system I should set it to. I need the file system to be fully compatible with Windows as I'm going to be removing the HDD from the media centre and plugging it into my main PC, running Windows 8, to transfer the media onto it. I can't transfer over Wi-Fi as the media centre won't be connected to the Internet. My options are: Ext4 journaling, Ext3 journaling, Ext2 journaling, ReiserFS journaling, btrfs journaling, JFS journaling, XFS journaling, FAT16 and FAT32. I know that FAT32 is compatible with Windows but it can only hold files that are 4 GB or less and my films are well over 4 GB. Some more than 10 GB. Is there a file system I can use which is supported by Linux and pops up under Computer in Windows?

  Read the article

• VirtualBox 4.0.10 is now available for download

  - by user12611829

  VirtualBox 4.0.10 has been released and is now available for download. You can get binaries for Windows, OS X (Intel Mac), Linux and Solaris hosts at http://www.virtualbox.org/wiki/Downloads The full changelog can be found here. The high points for the 4.0.10 maintenance release include .... GUI: fixed disappearing settings widgets on KDE hosts (bug #6809) Storage: fixed hang under rare circumstances with flat VMDK images Storage: a saved VM could not be restored under certain circumstances after the host kernel was updated Storage: refuse to create a medium with an invalid variant Snapshots: none of the hard disk attachments must be attached to another VM in normal mode when creating a snapshot USB: fixed occasional VM hangs with SMP guests USB: proper device detection on RHEL/OEL/CentOS 5 guests ACPI: force the ACPI timer to return monotonic values for improve behavior with SMP Linux guests RDP: fixed screen corruption under rare circumstances rdesktop-vrdp: updated to version 1.7.0 OVF: under rare circumstances some data at the end of a VMDK file was not written during export Mac OS X hosts: Lion fixes Mac OS X hosts: GNOME 3 fix Linux hosts: fixed VT-x detection on Linux 3.0 hosts Linux hosts: fixed Python 2.7 bindings in the universal Linux binaries Windows hosts: fixed leak of thread and process handles Windows Additions: fixed bug when determining the extended version of the Guest Additions Solaris Additions: fixed installation to 64-bit Solaris 10u9 guests Linux Additions: RHEL6.1/OL6.1 compile fix Linux Additions: fixed a memory leak during VBoxManage guestcontrol execute Technocrati Tags: Sun Virtualization VirtualBox var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

  Read the article

• I installed ubuntu, the installer told me to reboot afterwards. I dd, and now linux wont boot

  - by mandy

  Im trying to dual boot between mac 10.6.8 and ubuntu 11.10. I have a macbook pro 8,1. So i installed from a 10.04 disk because the install window makes more sense to me, and it doesnt give me errors or anything. Also, any versions of ubuntu after that dont boot from disk for whatever reason. (i think its having to do with the efi boot thing. i have to get ubuntu 11.10 to boot from a usb with folders bootefiboot.iso) Then my plan after that was after the ubuntu 10.04 install took care of all the swap and stuff for me without being messy, to upgrade to 11.10. So here i have 10.04 booting successfully back and forth from mac osx no problem. I put in my 11.10 usb and the installer gives me the option to "update 10.04 to 11.10" bingo, jackpot, thats what i want. Everything proceeds as normal, as EVERY OTHER install of ubuntu i have ever done, then the installer finishes and says HEY! im finished! Continue testing or reboot now! So i reboot, and what do i get??? A black screen that says the file system isnt found, to enter a boot disk and press any key. WHAT THE HELL????? so i boot the 11.10 installer again from usb, and select "erase 11.10 and install 11.10", installer proceeds normally, and asks me to reboot. I reboot and get the SAME THING. Please, someone, help me get this right here. This is my first time actually dual booting between mac and linux. Usually i just wipe off osx completely and install ubuntu but i actually need to keep my mac partition this time. I have successfully installed 11.10 on this machine before, but that was when i did a clean install. Help?

  Read the article

• Security Token for Mac/Linux/Windows, self-managed, pref. open source?

  - by DevelopersDevelopersDevelopers

  I'm looking to buy an evaluation security token (combined smart card/usb reader) for my business that works on: Windows 7 x64 OS X 10.6.x x64 Ubuntu Linux (64 or 32 bit, 10.04 or 10.10, I can bend based on possible tokens) Functionality I need is: Login authentication Authentication for whole-disk encryption (in Linux/Windows, Mac is flexible here) Signing/encryption using PGP and x.509 certificates RSA-2048 key-capable (1024 not good enough.) I can manage the certificates myself Open source middleware/drivers (not necessarily FOSS, just source available. Can flex on this, I just want to be able to audit the code. OpenSC-compatible on Linux would be great.) Is there any token that can do all of this? Or would I need multiple ones to accomplish this? Or do I need to look at smart cards and readers to get this? I have been researching this for a while and have had a heck of a time even getting accurate information about products. Also, I am in the USA, and it appears that EU export laws prevent me from buying from there, so those vendors are out. I was looking at Feitian tokens from Gooze, but since they are in France I can't buy.

  Read the article

• Fusion Middleware 11gR1 : 2012?4??????

  - by Hiro

  2012 ?4? (2012/04/17 ??)?Fusion Middleware 11gR1 ?????????????? ? ????????????4??????? 1. Oracle JDK??????Oracle JDK???????Oracle JRE/JDK 6 Update 31, Oracle JRE/JDK 7 Update 3 ??????? ???????????????Linux x86, Linux x86-64, Solaris (SPARC), Solaris x86-64, Windows (32-bit), Windows x64 ?????? 2. Oracle JRockit??????Oracle JRockit???????Oracle JRockit R28.2.2 ??????? ???????????????Linux x86, Linux x86-64, Solaris (SPARC), Windows (32-bit), Windows x64 ?????? 3. Oracle GlassFish ServerOracle GlassFish Server 3.1.2 ??????? ? ??????????????AIX, Linux x86, Linux x86-64, Solaris (SPARC), Solaris x86-64, Windows (32-bit), Windows x64, Other Platforms ?????? 4. Oracle Fusion Middleware 11.1.1.6.0?11.1.1.6.0?(Oracle WebLogic Server 10.3.6 ?????)?????????????????????AIX, Linux x86, Linux x86-64, Solaris (SPARC), Solaris x86-64, Windows (32-bit), Windows x64, Other Platforms ?????? ???????????????????????????????? Oracle Business Process Analysis Suite 11g (11.1.1.4.0) Oracle Directory Server Enterprise Edition 11g (11.1.1.5.0) Oracle Identity and Access Management 11g (11.1.1.5.0) OAM, OAAM, OIM ?? Oracle Identity Analytics 11g (11.1.1.5.0) Oracle Unified Directory 11g (11.1.1.5.0) Oracle Tuxedo 11g (11.1.1.2.0) or 11g (11.1.1.3.0) ?????Sun, ?FatWire??????? ???????????????11.1.1.6.0???????????????????????Oracle Fusion Middleware ?????????????????ReadMe 11g Release 1 (11.1.1.6.0)????????????Fixed Bug List????????????Note#1364511.1 ?????????? (Note????????????????????) ? ??????????????

  Read the article

• sudo port install arm-elf-gcc3 fails with "No defined site for tag: gcc…"

  - by Scott Bayes

  Am trying to get the ARM plugin for Eclipse (http://sourceforge.net/projects/gnuarmeclipse/) going on iMac i7, OS 10.6.3, Xcode 3.2.2 (don't want to upgrade during my project). The plugin needs (IIRC) arm-elf-gcc3, which needs darwinports for "easy" install. Of course, probably due to leftovers when I moved from old MacBook to iMac, Darwin ports 1.8.2 wouldn't install till I built 1.7.1 from source and installed it. darwinports 1.8.1 appears to have been properly installed, but sudo port install arm-elf-gcc3 led to 5-10 minutes of dependencies installs, then the following, produced with port -d (starting from last dependency completion for brevity): DEBUG: Found Dependency: receipt exists for gettext DEBUG: Executing org.macports.main (arm-elf-gcc3) --- Fetching arm-elf-gcc3 DEBUG: Executing org.macports.fetch (arm-elf-gcc3) --- gcc-3.4.6.tar.bz2 doesn't seem to exist in /opt/local/var/macports/distfiles/gcc Error: No defined site for tag: gcc, using master_sites Error: Target org.macports.fetch returned: can't read "host": no such variable DEBUG: Backtrace: can't read "host": no such variable while executing "info exists seen($host)" (procedure "sortsites" line 25) invoked from within "sortsites fetch_urls" (procedure "portfetch::fetchfiles" line 49) invoked from within "portfetch::fetchfiles" (procedure "portfetch::fetch_main" line 16) invoked from within "$procedure $targetname" Warning: the following items did not execute (for arm-elf-gcc3): org.macports.activate org.macports.fetch org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. (sorry if that's a mess, neither blockquote nor code sample tags seem to properly display cut/pasted text from Terminal.app in preview window). Can anyone advise me on how to get around this (or how to build/install arm-elf-gcc3 from source if necessary)? None of the darwinports FAQs or forums mentioned arm-elf-gcc3 anywhere that I saw.

  Read the article

• How do I read text from a serial port?

  - by user2164

  I am trying to read data off of a Windows serial port through Java. I have the javax.comm libraries and am able to get some data but not correct data. When I read the port into a byte array and convert it to text I get a series of characters but no real text string. I have tried to specify the byte array as being both "UTF-8" and "US-ASCII". Does anyone know how to get real text out of this? Here is my code: while (inputStream.available() > 0) { int numBytes = inputStream.read(readBuffer); System.out.println("Reading from " + portId.getName() + ": "); System.out.println("Read " + numBytes + " bytes"); } System.out.println(new String(readBuffer)); System.out.println(new String(readBuffer, "UTF-8")); System.out.println(new String(readBuffer, "US-ASCII")); the output of the first three lines will not let me copy and paste (I assume because they are not normal characters). Here is the output of the Hex: 78786000e67e9e60061e8606781e66e0869e98e086f89898861878809e1e9880 I am reading from a Hollux GPS device which does output in string format. I know this for sure because I did it through C#. The settings that I am using for communication which I know are right from the work in the C# app are: Baud Rate: 9600 Databits: 8 Stop bit: 1 parity: none

  Read the article

< Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >