Search Results

Search found 15860 results on 635 pages for 'document oriented databas'.

Page 606/635 | < Previous Page | 602 603 604 605 606 607 608 609 610 611 612 613  | Next Page >

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • Complete Guide to Symbolic Links (symlinks) on Windows or Linux

    - by Matthew Guay
    Want to easily access folders and files from different folders without maintaining duplicate copies?  Here’s how you can use Symbolic Links to link anything in Windows 7, Vista, XP, and Ubuntu. So What Are Symbolic Links Anyway? Symbolic links, otherwise known as symlinks, are basically advanced shortcuts. You can create symbolic links to individual files or folders, and then these will appear like they are stored in the folder with the symbolic link even though the symbolic link only points to their real location. There are two types of symbolic links: hard and soft. Soft symbolic links work essentially the same as a standard shortcut.  When you open a soft link, you will be redirected to the folder where the files are stored.  However, a hard link makes it appear as though the file or folder actually exists at the location of the symbolic link, and your applications won’t know any different. Thus, hard links are of the most interest in this article. Why should I use Symbolic Links? There are many things we use symbolic links for, so here’s some of the top uses we can think of: Sync any folder with Dropbox – say, sync your Pidgin Profile Across Computers Move the settings folder for any program from its original location Store your Music/Pictures/Videos on a second hard drive, but make them show up in your standard Music/Pictures/Videos folders so they’ll be detected my your media programs (Windows 7 Libraries can also be good for this) Keep important files accessible from multiple locations And more! If you want to move files to a different drive or folder and then symbolically link them, follow these steps: Close any programs that may be accessing that file or folder Move the file or folder to the new desired location Follow the correct instructions below for your operating system to create the symbolic link. Caution: Make sure to never create a symbolic link inside of a symbolic link. For instance, don’t create a symbolic link to a file that’s contained in a symbolic linked folder. This can create a loop, which can cause millions of problems you don’t want to deal with. Seriously. Create Symlinks in Any Edition of Windows in Explorer Creating symlinks is usually difficult, but thanks to the free Link Shell Extension, you can create symbolic links in all modern version of Windows pain-free.  You need to download both Visual Studio 2005 redistributable, which contains the necessary prerequisites, and Link Shell Extension itself (links below).  Download the correct version (32 bit or 64 bit) for your computer. Run and install the Visual Studio 2005 Redistributable installer first. Then install the Link Shell Extension on your computer. Your taskbar will temporally disappear during the install, but will quickly come back. Now you’re ready to start creating symbolic links.  Browse to the folder or file you want to create a symbolic link from.  Right-click the folder or file and select Pick Link Source. To create your symlink, right-click in the folder you wish to save the symbolic link, select “Drop as…”, and then choose the type of link you want.  You can choose from several different options here; we chose the Hardlink Clone.  This will create a hard link to the file or folder we selected.  The Symbolic link option creates a soft link, while the smart copy will fully copy a folder containing symbolic links without breaking them.  These options can be useful as well.   Here’s our hard-linked folder on our desktop.  Notice that the folder looks like its contents are stored in Desktop\Downloads, when they are actually stored in C:\Users\Matthew\Desktop\Downloads.  Also, when links are created with the Link Shell Extension, they have a red arrow on them so you can still differentiate them. And, this works the same way in XP as well. Symlinks via Command Prompt Or, for geeks who prefer working via command line, here’s how you can create symlinks in Command Prompt in Windows 7/Vista and XP. In Windows 7/Vista In Windows Vista and 7, we’ll use the mklink command to create symbolic links.  To use it, we have to open an administrator Command Prompt.  Enter “command” in your start menu search, right-click on Command Prompt, and select “Run as administrator”. To create a symbolic link, we need to enter the following in command prompt: mklink /prefix link_path file/folder_path First, choose the correct prefix.  Mklink can create several types of links, including the following: /D – creates a soft symbolic link, which is similar to a standard folder or file shortcut in Windows.  This is the default option, and mklink will use it if you do not enter a prefix. /H – creates a hard link to a file /J – creates a hard link to a directory or folder So, once you’ve chosen the correct prefix, you need to enter the path you want for the symbolic link, and the path to the original file or folder.  For example, if I wanted a folder in my Dropbox folder to appear like it was also stored in my desktop, I would enter the following: mklink /J C:\Users\Matthew\Desktop\Dropbox C:\Users\Matthew\Documents\Dropbox Note that the first path was to the symbolic folder I wanted to create, while the second path was to the real folder. Here, in this command prompt screenshot, you can see that I created a symbolic link of my Music folder to my desktop.   And here’s how it looks in Explorer.  Note that all of my music is “really” stored in C:\Users\Matthew\Music, but here it looks like it is stored in C:\Users\Matthew\Desktop\Music. If your path has any spaces in it, you need to place quotes around it.  Note also that the link can have a different name than the file it links to.  For example, here I’m going to create a symbolic link to a document on my desktop: mklink /H “C:\Users\Matthew\Desktop\ebook.pdf”  “C:\Users\Matthew\Downloads\Before You Call Tech Support.pdf” Don’t forget the syntax: mklink /prefix link_path Target_file/folder_path In Windows XP Windows XP doesn’t include built-in command prompt support for symbolic links, but we can use the free Junction tool instead.  Download Junction (link below), and unzip the folder.  Now open Command Prompt (click Start, select All Programs, then Accessories, and select Command Prompt), and enter cd followed by the path of the folder where you saved Junction. Junction only creates hard symbolic links, since you can use shortcuts for soft ones.  To create a hard symlink, we need to enter the following in command prompt: junction –s link_path file/folder_path As with mklink in Windows 7 or Vista, if your file/folder path has spaces in it make sure to put quotes around your paths.  Also, as usual, your symlink can have a different name that the file/folder it points to. Here, we’re going to create a symbolic link to our My Music folder on the desktop.  We entered: junction -s “C:\Documents and Settings\Administrator\Desktop\Music” “C:\Documents and Settings\Administrator\My Documents\My Music” And here’s the contents of our symlink.  Note that the path looks like these files are stored in a Music folder directly on the Desktop, when they are actually stored in My Documents\My Music.  Once again, this works with both folders and individual files. Please Note: Junction would work the same in Windows 7 or Vista, but since they include a built-in symbolic link tool we found it better to use it on those versions of Windows. Symlinks in Ubuntu Unix-based operating systems have supported symbolic links since their inception, so it is straightforward to create symbolic links in Linux distros such as Ubuntu.  There’s no graphical way to create them like the Link Shell Extension for Windows, so we’ll just do it in Terminal. Open terminal (open the Applications menu, select Accessories, and then click Terminal), and enter the following: ln –s file/folder_path link_path Note that this is opposite of the Windows commands; you put the source for the link first, and then the path second. For example, let’s create a symbolic link of our Pictures folder in our Desktop.  To do this, we entered: ln -s /home/maguay/Pictures /home/maguay/Desktop   Once again, here is the contents of our symlink folder.  The pictures look as if they’re stored directly in a Pictures folder on the Desktop, but they are actually stored in maguay\Pictures. Delete Symlinks Removing symbolic links is very simple – just delete the link!  Most of the command line utilities offer a way to delete a symbolic link via command prompt, but you don’t need to go to the trouble.   Conclusion Symbolic links can be very handy, and we use them constantly to help us stay organized and keep our hard drives from overflowing.  Let us know how you use symbolic links on your computers! Download Link Shell Extension for Windows 7, Vista, and XP Download Junction for XP Similar Articles Productive Geek Tips Using Symlinks in Windows VistaHow To Figure Out Your PC’s Host Name From the Command PromptInstall IceWM on Ubuntu LinuxAdd Color Coding to Windows 7 Media Center Program GuideSync Your Pidgin Profile Across Multiple PCs with Dropbox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

    Read the article

  • Visual Studio 2013 Static Code Analysis in depth: What? When and How?

    - by Hosam Kamel
    In this post I'll illustrate in details the following points What is static code analysis? When to use? Supported platforms Supported Visual Studio versions How to use Run Code Analysis Manually Run Code Analysis Automatically Run Code Analysis while check-in source code to TFS version control (TFSVC) Run Code Analysis as part of Team Build Understand the Code Analysis results & learn how to fix them Create your custom rule set Q & A References What is static Rule analysis? Static Code Analysis feature of Visual Studio performs static code analysis on code to help developers identify potential design, globalization, interoperability, performance, security, and a lot of other categories of potential problems according to Microsoft's rules that mainly targets best practices in writing code, and there is a large set of those rules included with Visual Studio grouped into different categorized targeting specific coding issues like security, design, Interoperability, globalizations and others. Static here means analyzing the source code without executing it and this type of analysis can be performed through automated tools (like Visual Studio 2013 Code Analysis Tool) or manually through Code Review which already supported in Visual Studio 2012 and 2013 (check Using Code Review to Improve Quality video on Channel9) There is also Dynamic analysis which performed on executing programs using software testing techniques such as Code Coverage for example. When to use? Running Code analysis tool at regular intervals during your development process can enhance the quality of your software, examines your code for a set of common defects and violations is always a good programming practice. Adding that Code analysis can also find defects in your code that are difficult to discover through testing allowing you to achieve first level quality gate for you application during development phase before you release it to the testing team. Supported platforms .NET Framework, native (C and C++) Database applications. Support Visual Studio versions All version of Visual Studio starting Visual Studio 2013 (except Visual Studio Test Professional) check Feature comparisons Create and modify a custom rule set required Visual Studio Premium or Ultimate. How to use? Code Analysis can be run manually at any time from within the Visual Studio IDE, or even setup to automatically run as part of a Team Build or check-in policy for Team Foundation Server. Run Code Analysis Manually To run code analysis manually on a project, on the Analyze menu, click Run Code Analysis on your project or simply right click on the project name on the Solution Explorer choose Run Code Analysis from the context menu Run Code Analysis Automatically To run code analysis each time that you build a project, you select Enable Code Analysis on Build on the project's Property Page Run Code Analysis while check-in source code to TFS version control (TFSVC) Team Foundation Version Control (TFVC) provides a way for organizations to enforce practices that lead to better code and more efficient group development through Check-in policies which are rules that are set at the team project level and enforced on developer computers before code is allowed to be checked in. (This is available only if you're using Team Foundation Server) Require permissions on Team Foundation Server: you must have the Edit project-level information permission set to Allow typically your account must be part of Project Administrators, Project Collection Administrators, for more information about Team Foundation permissions check http://msdn.microsoft.com/en-us/library/ms252587(v=vs.120).aspx In Team Explorer, right-click the team project name, point to Team Project Settings, and then click Source Control. In the Source Control dialog box, select the Check-in Policy tab. Click Add to create a new check-in policy. Double-click the existing Code Analysis item in the Policy Type list to change the policy. Check or Uncheck the policy option based on the configurations you need to perform as illustrated below: Enforce check-in to only contain files that are part of current solution: code analysis can run only on files specified in solution and project configuration files. This policy guarantees that all code that is part of a solution is analyzed. Enforce C/C++ Code Analysis (/analyze): Requires that all C or C++ projects be built with the /analyze compiler option to run code analysis before they can be checked in. Enforce Code Analysis for Managed Code: Requires that all managed projects run code analysis and build before they can be checked in. Check Code analysis rule set reference on MSDN What is Rule Set? Rule Set is a group of code analysis rules like the example below where Microsoft.Design is the rule set name where "Do not declare static members on generic types" is the code analysis rule Once you configured the Analysis rule the policy will be enabled for all the team member in this project whenever a team member check-in any source code to the TFSVC the policy section will highlight the Code Analysis policy as below TFS is a very extensible platform so you can simply implement your own custom Code Analysis Check-in policy, check this link for more details http://msdn.microsoft.com/en-us/library/dd492668.aspx but you have to be aware also about compatibility between different TFS versions check http://msdn.microsoft.com/en-us/library/bb907157.aspx Run Code Analysis as part of Team Build With Team Foundation Build (TFBuild), you can create and manage build processes that automatically compile and test your applications, and perform other important functions. Code Analysis can be enabled in the Build Definition file by selecting the correct value for the build process parameter "Perform Code Analysis" Once configure, Kick-off your build definition to queue a new build, Code Analysis will run as part of build workflow and you will be able to see code analysis warning as part of build report Understand the Code Analysis results & learn how to fix them Now after you went through Code Analysis configurations and the different ways of running it, we will go through the Code Analysis result how to understand them and how to resolve them. Code Analysis window in Visual Studio will show all the analysis results based on the rule sets you configured in the project file properties, let's dig deep into what each result item contains: 1 Check ID The unique identifier for the rule. CheckId and Category are used for in-source suppression of a warning.       2 Title The title of warning message       3 Description A description of the problem or suggested fix 4 File Name File name and the line of code number which violate the code analysis rule set 5 Category The code analysis category for this error 6 Warning /Error Depend on how you configure it in the rule set the default is Warning level 7 Action Copy: copy the warning information to the clipboard Create Work Item: If you're connected to Team Foundation Server you can create a work item most probably you may create a Task or Bug and assign it for a developer to fix certain code analysis warning Suppress Message: There are times when you might decide not to fix a code analysis warning. You might decide that resolving the warning requires too much recoding in relation to the probability that the issue will arise in any real-world implementation of your code. Or you might believe that the analysis that is used in the warning is inappropriate for the particular context. You can suppress individual warnings so that they no longer appear in the Code Analysis window. Two options available: In Source inserts a SuppressMessage attribute in the source file above the method that generated the warning. This makes the suppression more discoverable. In Suppression File adds a SuppressMessage attribute to the GlobalSuppressions.cs file of the project. This can make the management of suppressions easier. Note that the SuppressMessage attribute added to GlobalSuppression.cs also targets the method that generated the warning. It does not suppress the warning globally.       Visual Studio makes it very easy to fix Code analysis warning, all you have to do is clicking on the Check Id hyperlink if you are not aware how to fix the warring and you'll be directed to MSDN online or local copy based on the configuration you did while installing Visual Studio and you will find all the information about the warring including how to fix it. Create a Custom Code Analysis Rule Set The Microsoft standard rule sets provide groups of rules that are organized by function and depth. For example, the Microsoft Basic Design Guidelines Rules and the Microsoft Extended Design Guidelines Rules contain rules that focus on usability and maintainability issues, with added emphasis on naming rules in the Extended rule set, you can create and modify a custom rule set to meet specific project needs associated with code analysis. To create a custom rule set, you open one or more standard rule sets in the rule set editor. Create and modify a custom rule set required Visual Studio Premium or Ultimate. You can check How to: Create a Custom Rule Set on MSDN for more details http://msdn.microsoft.com/en-us/library/dd264974.aspx Q & A Visual Studio static code analysis vs. FxCop vs. StyleCpp http://www.excella.com/blog/stylecop-vs-fxcop-difference-between-code-analysis-tools/ Code Analysis for SharePoint Apps and SPDisposeCheck? This post lists some of the rule set you can run specifically for SharePoint applications and how to integrate SPDisposeCheck as well. Code Analysis for SQL Server Database Projects? This post illustrate how to run static code analysis on T-SQL through SSDT ReSharper 8 vs. Visual Studio 2013? This document lists some of the features that are provided by ReSharper 8 but are missing or not as fully implemented in Visual Studio 2013. References A Few Billion Lines of Code Later: Using Static Analysis to Find Bugs in the Real World http://cacm.acm.org/magazines/2010/2/69354-a-few-billion-lines-of-code-later/fulltext What is New in Code Analysis for Visual Studio 2013 http://blogs.msdn.com/b/visualstudioalm/archive/2013/07/03/what-is-new-in-code-analysis-for-visual-studio-2013.aspx Analyze the code quality of Windows Store apps using Visual Studio static code analysis http://msdn.microsoft.com/en-us/library/windows/apps/hh441471.aspx [Hands-on-lab] Using Code Analysis with Visual Studio 2012 to Improve Code Quality http://download.microsoft.com/download/A/9/2/A9253B14-5F23-4BC8-9C7E-F5199DB5F831/Using%20Code%20Analysis%20with%20Visual%20Studio%202012%20to%20Improve%20Code%20Quality.docx Originally posted at "Hosam Kamel| Developer & Platform Evangelist" http://blogs.msdn.com/hkamel

    Read the article

  • 17 new features in Visual Studio 2010

    - by vik20000in
    Visual studio 2010 has been released to RTM a few days back. This release of Visual studio 2010 comes with a big number of improvements on many fronts. In this post I will try and point out some of the major improvements in Visual Studio 2010. 1)      Visual studio IDE Improvement. Visual studio IDE has been rewritten in WPF. The look and feel of the studio has been improved for improved readability. Start page has been redesigned and template so that anyone can change the start page as they wish. 2)      Multiple Monitor - Support for Multiple Monitor was already there in Visual studio. But in this edition it has been improved as much that we can now place the document, design and code window outside the IDE in another monitor. 3)      ZOOM in Code Editor – Making the editors in WPF has made significant improvement for them. The best one that I like is the ZOOM feature. We can now zoom in the code editor with the help of the ctrl + Mouse scroll. The zoom feature does not work on the Design surface or windows with icon like solution view and toolbox. 4)      Box Selection - Another Important improvement in the Visual studio 2010 is the box selection. We can select a rectangular by holding down the Alt Key and selecting with mouse.  Now in the rectangular selection we can insert text, Paste same code in different line etc. This is helpful if you want to convert a number of variables from public to private etc… 5)      New Improved Search – One of the best productivity improvements in Visual studio 2010 is its new search as you type support. This has been done in the Navigate To window which can be brought up by pressing (Ctrl + ,). The navigate To windows also take help of the Camel casing and will be able to search with the help of camel casing when character is entered in upper case. For example we can search AOH for AddOrederHeader. 6)      Call Hierarchy – This feature is only available to the Visual C# and Visual C++ editor. The call hierarchy windows displays the calls made to and from (yes both to and from) a selected method property or a constructor. The call hierarchy also shows the implementation of interface and the overrides of virtual or abstract methods. This window is very helpful in understanding the code flow, and evaluating the effect of making changes. The best part is it is available at design time and not at runtime only like a debugger. 7)      Highlighting references – One of the very cool stuff in Visual Studio 2010 is the fact if you select a variable then all the use of that variable will be highlighted alongside. This should work for all the result of symbols returned by Find all reference. This also works for Name of class, objects variable, properties and methods. We can also use the Ctrl + Shift + Down Arrow or Up Arror to move through them. 8)      Generate from usage - The Generate from usage feature lets you use classes and members before you define them. You can generate a stub for any undefined class, constructor, method, property, field, or enum that you want to use but have not yet defined. You can generate new types and members without leaving your current location in code, This minimizes interruption to your workflow.9)      IntelliSense Suggestion Mode - IntelliSense now provides two alternatives for IntelliSense statement completion, completion mode and suggestion mode. Use suggestion mode for situations where classes and members are used before they are defined. In suggestion mode, when you type in the editor and then commit the entry, the text you typed is inserted into the code. When you commit an entry in completion mode, the editor shows the entry that is highlighted on the members list. When an IntelliSense window is open, you can press CTRL+ALT+SPACEBAR to toggle between completion mode and suggestion mode. 10)   Application Lifecycle Management – A client application for management of application lifecycle like version control, work item tracking, build automation, team portal etc is available for free (this is not available for express edition.). 11)   Start Page – The start page has been redesigned with WPF for new functionality and look. Tabbed areas are provided for content from different source including MSDN. Once you open some project the start page closes automatically. The list of recent project also lets you remove project from the list. And above all the start page is customizable enough to be changed as per individual requirement. 12)   Extension Manager – Visual Studio 2010 has provided good ways to be extended. We can also use MEF to extend most of the features of Visual Studio. The new extension manager now can go the visual studio gallery and install the extension without even opening any explorer. 13)   Code snippets – Visual studio 2010 for HTML, Jscript and Asp.net also. 14)   Improved Intelligence for JavaScript has been improved vastly (around 2-5 times). Intelligence now also shows the XML documentation comment on the go. 15)   Web Deployment – Web Deployment has been vastly improved. We can package and publish the web application in one click. Three major supported deployment scenarios are Web packages, one click deployment and Web configuration Transformation. 16)   SharePoint - Visual Studio 2010 also brings vastly improved development experience for SharePoint. We can create, edit, debug, package, deploy and activate SharePoint project from within Visual Studio. Deployment of Site is as easy as hitting F5. 17)   Azure – Visual Studio 2010 also comes with handy improvement for developing on windows Azure environment. Vikram

    Read the article

  • CodePlex Daily Summary for Saturday, February 27, 2010

    CodePlex Daily Summary for Saturday, February 27, 2010New ProjectsASP.NET MVC ScriptBehind: Dynamic, developer & designer friendly script inclusion, compression and optimization for ASP.NET MVCCSLib.Net: CSLib.Net (Common Solutions Library) is yet another library with commonly used utilities, helpers, extensions and etc.DNN Module - Google Analytic Dashboard: Here is a Google Analytic Dashboard DNN Module which contain following sub modules. * Visitors Overview * World Map Overlay * Traf...dotUML: dotUML is a toolkit that enables developers to create and visualize UML diagrams like sequence, use case or component diagrams. EventRegistration: Event Registration ProgramGameStore League Manager: GameStore League Manager makes it easier for gaming store managers to run local leagues for card games, board games and any game where there is a h...GibberIM: GibberIM (Gibberish IM) is yet another Jabber instant messanger implementation.HTTP Compression Library for Heavy Load Web Server: Deflater is a HTTP Compression Library, supporting Deflate (RFC 1950, RFC 1951) and GZip (RFC 1952). It is designed to encode and compress HTML con...HydroLiDAR: This is a research project intended to explore algorithms and techniques for extracting Hydrographic features (rivers, watersheds, ponds, pits, etc...Lan Party Manager: Lan Party ManagerMAPS SQL Analysis Project: This solution demonstrates how to build a Business Intelligence solution on top of the MAPS databaseMMDB Parallax ALM: An open source Application Lifecycle Management (ALM) system, being built by Mike Mooney of MMDB Solutions, as a learning/teaching exercise. MyColorSprite: This Silverlight app is a color selection tool especially great for creating gredient color brushes for the xaml code. It allows a user create/pic...PDF Form Bubble Up: Bubble Up takes PDF Forms stored in SharePoint document libraries and "bubbles up" the data in the PDF Form to the library. This means the data tha...PostBack Blog Engine: A modified Oxite open-source blog engine on top of the DB4O object database engine.Project Otto: A Silverlight Isometric Rendering Engine and Demo GameQFrac: Fraktalų generatorius parašytas naudojant Qt karkasą.RapidIoC: RapidIoC provides lightning fast IoC capabilities including Dependency Injection & AOP. The modular framework will allow for constructor, property,...Shatranj: A WPF / Silverlight based frontend to Huo Chess. This project was conceived as a way to learn key WPF / Silverlight concepts. At the release, it...WHS SkyDrive Backup Add In: This project allows for Windows Home Server to backup selected folders to your free 25GB Live SkyDrive. Simply dump the Home Server Add In, into y...Workflow Type Browser for WF4: This Workflow Type Browser displays type information for all arguments and variables in a WF4 workflow. It is designed for use in a rehosted desig...ZoomBarPlus: Windows Mobile Service designed for the HTC Touch Pro 2. Adds additional functionality to the zoom bar at the bottom of the screen. You can map key...New ReleasesBCryptTool: BCryptTool v0.2: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Braintree Client Library: Braintree-1.1.1: Braintree-1.1.1CC.Utilities: CC.Utilities 1.0.10.226: Minor bug fixes. A few new functions in the Interop namespace. DoubleBufferedGraphics now exposes the underlying memory Image through the Mem...CC.Votd: CC.Votd 1.0.10.227: This release includes several bug fixes and enchancements. The most notable enhancement is the RssItemCache which will allow the screensaver to f...DNN Module - Google Analytic Dashboard: DNN Module - Google Analytic Dashboard: Here is a Google Analytic Dashboard DNN Module which contain following sub modules. * Visitors Overview * World Map Overlay * Traffic ...Extend SmallBasic: Teaching Extensions v.008: Fixed Message Box to appear in front as expected. Added ColorWheel.getRandomColor() Including Recipes and Concept slides as part of releaseFolderSize: FolderSize.Win32.1.0.5.0: FolderSize.Win32.1.0.5.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts 3.0.4 beta Released: Hi, Today we are releasing the much awaited Zooming feature. In this version of Zooming you will be able to zoom/scale the PlotArea of the chart. ...GameStore League Manager: League Manager 1.0: Rough and ready first version. You will need to have SQL Server Express 2005 or 2008 installed on your machine to use this software. Unzip to a l...Google Maps API 3 Visual Studio Intellisense: google-maps-3-vs-1-0-vsdoc: google-maps-3-vs-1-0 provides Visual Studio intellisense in-line api documentation and code completion for Google Maps API V3. Updated 02/25/10 A...HaoRan_WebCam: HaoRan.WebCam.Web beta2: 在年前发布的那一版基于silverlight4(beta)版的摄像头应用之后。经过最近一段时间的完善。目前已推出了beta2版,在修改了原有程序bug的基础上,做了如下变化: 1.将图片载入修改成为按原图宽高比进行缩放,所以以前沿X,Y轴变化就变成了一个缩放条同比例变化了。 ...IQToolkit Contrib: IQToolkitContrib.zip (v1.0.17.1): Update to DataServiceClientRepository - added ExecuteNonEntity to deal with calling Wcf Data Service methods for Dto classes (opposed to Entity cla...kdar: KDAR 0.0.15: KDAR - Kernel Debugger Anti Rootkit - new module cheks added - bugs fixedLogJoint - Log Viewer: logjoint 1.5: - Added support for more formats - Timeline improvement - Unicode logs and encodings supportMyColorSprite: MyColorSprite: MyColorSprite This Silverlight app is a color selection tool especially great for creating gredient color brushes for the xaml code. It allows a ...OAuthLib: OAuthLib (1.6.0.1): Difference between 1.6.0.0 is just version number.Picasa Downloader: PicasaDownloader Setup (41085): Changelog: Fixed workitem 10296 (Saving at resolutions above 1600px), Added experimental support for a modifier of the image download url (inse...Prolog.NET: Prolog.NET 1.0 Beta 1.1: Installer includes: primary Prolog.NET assembly Prolog.NET Workbench PrologTest console application all required dependencies Beta 1.1 in...QFrac: QFrac 1.0: Pirmoji stabili QFrac versija.SharepointApplicationFramework: SAF QuickPoll: Release Notes: This web part is written in VS2010 beta2 and uses Microsoft Chart Controls. Packaged into a single WSP. This wsp creates a quick po...Star System Simulator: Star System Simulator 2.2: An minor update to Version 2.1. Changes in this release: User interface enhancements/fixes with toolbar and icons. Features in this release: Mod...ToDoListReminder: Version 1.0.1.0: Bugs fixed: 10316, 10317 Handler for "Window Closing" event was added Error handling for XML parsing was addedVCC: Latest build, v2.1.30226.0: Automatic drop of latest buildWindows Remote Assistance For Skype: Beta 1.0.1: Major changes: 1) Now using Skype4COM to interact with Skype 2) InvitationXML is compressed 3) Showing warning on first run to Allow Access to SkypeWorkflow Type Browser for WF4: Release 1.0: There has been much surprise and disappointment expressed by the WF4 developer community since Microsoft made it clear that Intellisense woould not...Most Popular ProjectsData Dictionary CreatorOutlook 2007 Messaging API (MAPI) Code SamplesCommon Data Parameters ModuleTeam System - Work Item Spell Checker (All Languages)Tyrannt Online (Client/Server RPG)Ray Tracer StarterMeeting DemoNick BerardiScreenslayerRawrMost Active ProjectsDinnerNow.netRawrBlogEngine.NETMapWindow GISSLARToolkit - Silverlight Augmented Reality ToolkitInfoServiceSharpMap - Geospatial Application Framework for the CLRCommon Context Adapterspatterns & practices – Enterprise LibraryNB_Store - Free DotNetNuke Ecommerce Catalog Module

    Read the article

  • How to deal with transport level security policy with OSB

    - by Jian Liang
    Recently, we received a use case for Oracle Service Bus (OSB) 11gPS4 to consume a Web Service which is secured by HTTP transport level security policy. The WSDL of the remote web service looks like following where the part marked in red shows the security policy: <?xml version='1.0' encoding='UTF-8'?> <definitions xmlns:wssutil="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="https://httpsbasicauth" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="https://httpsbasicauth" name="HttpsBasicAuthService"> <wsp:UsingPolicy wssutil:Required="true"/> <wsp:Policy wssutil:Id="WSHttpBinding_IPartyServicePortType_policy"> <wsp:ExactlyOne> <wsp:All> <ns1:TransportBinding xmlns:ns1="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy"> <wsp:Policy> <ns1:TransportToken> <wsp:Policy> <ns1:HttpsToken RequireClientCertificate="false"/> </wsp:Policy> </ns1:TransportToken> <ns1:AlgorithmSuite> <wsp:Policy> <ns1:Basic256/> </wsp:Policy> </ns1:AlgorithmSuite> <ns1:Layout> <wsp:Policy> <ns1:Strict/> </wsp:Policy> </ns1:Layout> </wsp:Policy> </ns1:TransportBinding> <ns2:UsingAddressing xmlns:ns2="http://www.w3.org/2006/05/addressing/wsdl"/> </wsp:All> </wsp:ExactlyOne> </wsp:Policy> <types> <xsd:schema> <xsd:import namespace="https://proxyhttpsbasicauth" schemaLocation="http://localhost:7001/WS/HttpsBasicAuthService?xsd=1"/> </xsd:schema> <xsd:schema> <xsd:import namespace="https://httpsbasicauth" schemaLocation="http://localhost:7001/WS/HttpsBasicAuthService?xsd=2"/> </xsd:schema> </types> <message name="echoString"> <part name="parameters" element="tns:echoString"/> </message> <message name="echoStringResponse"> <part name="parameters" element="tns:echoStringResponse"/> </message> <portType name="HttpsBasicAuth"> <operation name="echoString"> <input message="tns:echoString"/> <output message="tns:echoStringResponse"/> </operation> </portType> <binding name="HttpsBasicAuthSoapPortBinding" type="tns:HttpsBasicAuth"> <wsp:PolicyReference URI="#WSHttpBinding_IPartyServicePortType_policy"/> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/> <operation name="echoString"> <soap:operation soapAction=""/> <input> <soap:body use="literal"/> </input> <output> <soap:body use="literal"/> </output> </operation> </binding> <service name="HttpsBasicAuthService"> <port name="HttpsBasicAuthSoapPort" binding="tns:HttpsBasicAuthSoapPortBinding"> <soap:address location="https://localhost:7002/WS/HttpsBasicAuthService"/> </port> </service> </definitions> The security assertion in the WSDL (marked in red) indicates that this is the HTTP transport level security policy which requires one way SSL with default authentication (aka. basic authenticate with username/password). Normally, there are two ways to handle web service security policy with OSB 11g: Use WebLogic 9.x policy Use OWSM Since OSB doesn’t support WebLogic 9.x WSSP transport level assertion (except for WS transport), when we tried to create the business service based on the imported WSDL, OSB complained with the following message: [OSB Kernel:398133]The service is based on WSDL with Web Services Security Policies that are not natively supported by Oracle Service Bus. Please select OWSM Policies - From OWSM Policy Store option and attach equivalent OWSM security policy. For the Business Service, either you can add the necessary client policies manually by clicking Add button or you can let Oracle Service Bus automatically pick and add compatible client policies by clicking Add Compatible button. Unfortunately, when tried with OWSM, we couldn’t find http_token_policy from OWSM since OSB PS4 doesn’t support OWSM http_token_policy. It seems that we ran into an unsupported situation that no appropriate policy can be used from both WebLogic and OWSM. As this security policy requires one way SSL with basic authentication at the transport level, a possible workaround is to meet the remote service's requirement at transport level without using web service policy. We can simply use OSB to establish SSL connection and provide username/password for authentication at the transport level to the remote web service. In this case, the business service within OSB will be transparent to the web service policy. However, we still need to deal with OSB console’s complaint related to unsupported security policy because the failure of WSDL validation prohibits OSB console to move forward. With the help from OSB Product Management team, we finally came up with the following solutions: Solution 1: OSB PS5 The good news is that the http_token_policy is made available in OSB PS5. With OSB PS5, you can simply add OWSM oracle/wss_http_token_over_ssl_client_policy to the business service. The simplest solution is to upgrade to OSB PS5 where the OWSM solution is provided out of the box. But if you are not in a position where upgrading is an immediate option, you might want to consider other two workaround solutions described below. Solution 2: Modifying WSDL This solution addresses OSB console’s complaint by removing the security policy from the imported WSDL within OSB. Without the security policy, OSB console allows the business service to be created based on modified WSDL.  Please bear in mind, modifying WSDL is done only for the OSB side via OSB console, no change is required on the remote Web Service. The main steps of this solution: Connect to OSB console import the remote WSDL into OSB remove security assertion (the red marked part) from the imported WSDL create a service account. In our sample, we simply take the user weblogic create the business service and check "Basic" for Authentication and select the created service account make sure that OSB consumes the web service via https. This solution requires modifying WSDL. It is suitable for any OSB version (10g or OSB 11g version) prior to PS5 without OWSM. However, modifying WSDL by hand is troublesome as it requires the user to remember that the original WSDL was edited.  It forces you to make the same edit each time you want to re-import the service WSDL when changes occur at the service level. This also prevents you from using UDDI to import WSDL.  Solution 3: Using original WSDL This solution keeps the WSDL intact and ignores the embedded policy by using OWSM. By design, OWSM doesn’t like WSDL with embedded security assertion. Since OWSM doesn’t provide the feature to explicitly ignore the embedded policy from a remote WSDL, in this solution, we use OWSM in a tricky way to ignore the embedded policy. Connect to OSB console import the remote WSDL into OSB create a service account create the business service in which check "Basic" for Authentication and select the created service account as the imported WSDL is intact, the OSB Kernel:398133 error is expected ignore this error message for the moment and navigate to the Policies Page of business service Select “From OWSM Policy Store” and click “Add” button, the list of policies will pop-up Here is the tricky part: select an arbitrary policy, and click “Cancel” Update and save By clicking “Cancel’ button, we didn’t add any OWSM policy to business service, but the embedded policy is ignored. Yes, this is tricky. According to Oracle OSB Product Manager, the future release of OWSM will add a button “None” which allows to ignore the embedded policy explicitly. This solution keeps the imported WSDL intact which is the big advantage over the solution 2. It is suitable for OSB 11g (version prior to PS5) domain with OWSM configured. This blog addressed the unsupported transport level web service security policy with OSB PS4. To summarize, if you are using OSB PS5 or in a position to upgrade to PS5, the recommendation is to use OWSM OOTB transport level security policy directly. With the release prior to 11g PS5, you can consider the solution 2 or 3 depending on if OWSM is configured.

    Read the article

  • Internationalize WebCenter Portal - Content Presenter

    - by Stefan Krantz
    Lately we have been involved in engagements where internationalization has been holding the project back from success. In this post we are going to explain how to get Content Presenter and its editorials to comply with the current selected locale for the WebCenter Portal session. As you probably know by now WebCenter Portal leverages the Localization support from Java Server Faces (JSF), in this post we will assume that the localization is controlled and enforced by switching the current browsers locale between English and Spanish. There is two main scenarios in internationalization of a content enabled pages, since Content Presenter offers both presentation of information as well as contribution of information, in this post we will look at how to enable seamless integration of correct localized version of the back end content file and how to enable the editor/author to edit the correct localized version of the file based on the current browser locale. Solution Scenario 1 - Localization aware content presentation Due to the amount of steps required to implement the enclosed solution proposal I have decided to share the solution with you in group components for each facet of the solution. If you want to get more details on each step, you can review the enclosed components. This post will guide you through the steps of enabling each component and what it enables/changes in each section of the system. Enable Content Presenter Customization By leveraging a predictable naming convention of the data files used to hold the content for the Content Presenter instance we can easily develop a component that will dynamically switch the name out before presenting the information. The naming convention we have leverage is the industry best practice by having a shared identifier as prefix (ContentABC) and a language enabled suffix (_EN) (_ES). So the assumption is that each file pair in above example should look like following:- English version - (ContentABC_EN)- Spanish version - (ContentABC_ES) Based on above theory we can now easily regardless of the primary version assigned to the content presenter instance switch the language out by using the localization support from JSF. Below java bean (oracle.webcenter.doclib.internal.view.presenter.NLSHelperBean) is enclosed in the customization project available for download at the bottom of the post: 1: public static final String CP_D_DOCNAME_FORMAT = "%s_%s"; 2: public static final int CP_UNIQUE_ID_INDEX = 0; 3: private ContentPresenter presenter = null; 4:   5:   6: public NLSHelperBean() { 7: super(); 8: } 9:   10: /** 11: * This method updates the configuration for the pageFlowScope to have the correct datafile 12: * for the current Locale 13: */ 14: public void initLocaleForDataFile() { 15: String dataFile = null; 16: // Checking that state of presenter is present, also make sure the item is eligible for localization by locating the "_" in the name 17: if(presenter.getConfiguration().getDatasource() != null && 18: presenter.getConfiguration().getDatasource().isNodeDatasource() && 19: presenter.getConfiguration().getDatasource().getNodeIdDatasource() != null && 20: !presenter.getConfiguration().getDatasource().getNodeIdDatasource().equals("") && 21: presenter.getConfiguration().getDatasource().getNodeIdDatasource().indexOf("_") > 0) { 22: dataFile = presenter.getConfiguration().getDatasource().getNodeIdDatasource(); 23: FacesContext fc = FacesContext.getCurrentInstance(); 24: //Leveraging the current faces contenxt to get current localization language 25: String currentLocale = fc.getViewRoot().getLocale().getLanguage().toUpperCase(); 26: String newDataFile = dataFile; 27: String [] uniqueIdArr = dataFile.split("_"); 28: if(uniqueIdArr.length > 0) { 29: newDataFile = String.format(CP_D_DOCNAME_FORMAT, uniqueIdArr[CP_UNIQUE_ID_INDEX], currentLocale); 30: } 31: //Replacing the current Node datasource with localized datafile. 32: presenter.getConfiguration().getDatasource().setNodeIdDatasource(newDataFile); 33: } 34: } With this bean code available to our WebCenter Portal implementation we can start the next step, by overriding the standard behavior in content presenter by applying a MDS Taskflow customization to the content presenter taskflow, following taskflow customization has been applied to the customization project attached to this post:- Library: WebCenter Document Library Service View- Path: oracle.webcenter.doclib.view.jsf.taskflows.presenter- File: contentPresenter.xml Changes made in above customization view:1. A new method invocation activity has been added (initLocaleForDataFile)2. The method invocation invokes the new NLSHelperBean3. The default activity is moved to the new Method invocation (initLocaleForDataFile)4. The outcome from the method invocation goes to determine-navigation (original default activity) The above changes concludes the presentation modification to support a compatible localization scenario for a content driven page. In addition this customization do not limit or disables the out of the box capabilities of WebCenter Portal. Steps to enable above customization Start JDeveloper and open your WebCenter Portal Application Select "Open Project" and include the extracted project you downloaded (CPNLSCustomizations.zip) Make sure the build out put from CPNLSCustomizations project is a dependency to your Portal project Deploy your Portal Application to your WC_CustomPortal managed server Make sure your naming convention of the two data files follow above recommendation Example result of the solution: Solution Scenario 2 - Localization aware content creation and authoring As you could see from Solution Scenario 1 we require the naming convention to be strictly followed, this means in the hands of a user with limited technology knowledge this can be one of the failing links in this solutions. Therefore I strongly recommend that you also follow this part since this will eliminate this risk and also increase the editors/authors usability with a magnitude. The current WebCenter Portal Architecture leverages WebCenter Content today to maintain, publish and manage content, therefore we need to make few efforts in making sure this part of the architecture is on board with our new naming practice and also simplifies the creation of content for our end users. As you probably remember the naming convention required a prefix to be common so I propose we enable a new component that help you auto name the content items dDocName (this means that the readable title can still be in a human readable format). The new component (WCP-LocalizationSupport.zip) built for this scenario will enable a couple of things: 1. A new service where a sequential number can be generate on request - service name: GET_WCP_LOCALE_CONTENTID 2. The content presenter is leveraging a specific function when launching the content creation wizard from within Content Presenter. Assumption is that users will create the content by clicking "Create Web Content" button. When clicking the button the wizard opened is actually running in side of WebCenter Content server, file executed (contentwizard.hcsp). This file uses JSON commands that will generate operations in the content server, I have extend this file to create two identical data files instead of one.- First it creates the English version by leveraging the new Service and a Global Rule to set the dDocName on the original check in screen, this global rule is available in a configuration package attached to this blog (NLSContentProfileRule.zip)- Secondly we run a set of JSON javascripts to create the Spanish version with the same details except for the name where we replace the suffix with (_ES)- Then content creation wizard ends with its out of the box behavior and assigns the Content Presenter instance the English versionSee Javascript markup below - this can be changed in the (WCP-LocalizationSupport.zip/component/WCP-LocalizationSupport/publish/webcenter) 1: //---------------------------------------A-TEAM--------------------------------------- 2: WCM.ContentWizard.CheckinContentPage.OnCheckinComplete = function(returnParams) 3: { 4: var callback = WCM.ContentWizard.CheckinContentPage.checkinCompleteCallback; 5: WCM.ContentWizard.ChooseContentPage.OnSelectionComplete(returnParams, callback); 6: // Load latest DOC_INFO_SIMPLE 7: var cgiPath = DOCLIB.config.httpCgiPath; 8: var jsonBinder = new WCM.Idc.JSONBinder(); 9: jsonBinder.SetLocalDataValue('IdcService', 'DOC_INFO_SIMPLE'); 10: jsonBinder.SetLocalDataValue('dID', returnParams.dID); 11: jsonBinder.Send(cgiPath, $CB(this, function(http) { 12: var ret = http.GetResponseText(); 13: var binder = new WCM.Idc.JSONBinder(ret); 14: var dDocName = binder.GetResultSetValue('DOC_INFO', 'dDocName', 0); 15: if(dDocName.indexOf("_") > 0){ 16: var ssBinder = new WCM.Idc.JSONBinder(); 17: ssBinder.SetLocalDataValue('IdcService', 'SS_CHECKIN_NEW'); 18: //Additional Localization dDocName generated 19: ssBinder.SetLocalDataValue('dDocName', getLocalizedDocName(dDocName, "es")); 20: ssBinder.SetLocalDataValue('primaryFile', 'default.xml'); 21: ssBinder.SetLocalDataValue('ssDefaultDocumentToken', 'SSContributorDataFile'); 22:   23: for(var n = 0 ; n < binder.GetResultSetFields('DOC_INFO').length ; n++) { 24: var field = binder.GetResultSetFields('DOC_INFO')[n]; 25: if(field != 'dID' && 26: field != 'dDocName' && 27: field != 'dID' && 28: field != 'dReleaseState' && 29: field != 'dRevClassID' && 30: field != 'dRevisionID' && 31: field != 'dRevLabel') { 32: ssBinder.SetLocalDataValue(field, binder.GetResultSetValue('DOC_INFO', field, 0)); 33: } 34: } 35: ssBinder.Send(cgiPath, $CB(this, function(http) {})); 36: } 37: })); 38: } 39:   40: //Support function to create localized dDocNames 41: function getLocalizedDocName(dDocName, lang) { 42: var result = dDocName.replace("_EN", ("_" + lang)); 43: return result; 44: } 45: //---------------------------------------A-TEAM--------------------------------------- 3. By applying the enclosed NLSContentProfileRule.zip, the check in screen for DataFile creation will have auto naming enabled with localization suffix (default is English)You can change the default language by updating the GlobalNlsRule and assign preferred prefix.See Rule markup for dDocName field below: <$executeService("GET_WCP_LOCALE_CONTENTID")$><$dprDefaultValue=WCP_LOCALE.LocaleContentId & "_EN"$> Steps to enable above extensions and configurations Install WebCenter Component (WCP-LocalizationSupport.zip), via the AdminServer in WebCenter Content Administration menus Enable the component and restart the content server Apply the configuration bundle to enable the new Global Rule (GlobalNlsRule), via the WebCenter Content Administration/Config Migration Admin New Content Creation Experience Result Content EditingContent editing will by default be enabled for authoring in the current select locale since the content file is selected by (Solution Scenario 1), this means that a user can switch his browser locale and then get the editing experience adaptable to the current selected locale. NotesA-Team are planning to post a solution on how to inline switch the locale of the WebCenter Portal Session, so the Content Presenter, Navigation Model and other Face related features are localized accordingly. Content Presenter examples used in this post is an extension to following post:https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enable_content_editing_of_iterative Downloads CPNLSCustomizations.zip - WebCenter Portal, Content Presenter Customization https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/CPNLSCustomizations.zip WCP-LocalizationSupport.zip - WebCenter Content, Extension Component to enable localization creation of files with compliant auto naminghttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/WCP-LocalizationSupport.zip NLSContentProfileRule.zip - WebCenter Content, Configuration Update Bundle to enable Global rule for new check in naming of data fileshttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/NLSContentProfileRule.zip

    Read the article

  • HTML5 Form Validation

    - by Stephen.Walther
    The latest versions of Google Chrome (16+), Mozilla Firefox (8+), and Internet Explorer (10+) all support HTML5 client-side validation. It is time to take HTML5 validation seriously. The purpose of the blog post is to describe how you can take advantage of HTML5 client-side validation regardless of the type of application that you are building. You learn how to use the HTML5 validation attributes, how to perform custom validation using the JavaScript validation constraint API, and how to simulate HTML5 validation on older browsers by taking advantage of a jQuery plugin. Finally, we discuss the security issues related to using client-side validation. Using Client-Side Validation Attributes The HTML5 specification discusses several attributes which you can use with INPUT elements to perform client-side validation including the required, pattern, min, max, step, and maxlength attributes. For example, you use the required attribute to require a user to enter a value for an INPUT element. The following form demonstrates how you can make the firstName and lastName form fields required: <!DOCTYPE html> <html > <head> <title>Required Demo</title> </head> <body> <form> <label> First Name: <input required title="First Name is Required!" /> </label> <label> Last Name: <input required title="Last Name is Required!" /> </label> <button>Register</button> </form> </body> </html> If you attempt to submit this form without entering a value for firstName or lastName then you get the validation error message: Notice that the value of the title attribute is used to display the validation error message “First Name is Required!”. The title attribute does not work this way with the current version of Firefox. If you want to display a custom validation error message with Firefox then you need to include an x-moz-errormessage attribute like this: <input required title="First Name is Required!" x-moz-errormessage="First Name is Required!" /> The pattern attribute enables you to validate the value of an INPUT element against a regular expression. For example, the following form includes a social security number field which includes a pattern attribute: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Pattern</title> </head> <body> <form> <label> Social Security Number: <input required pattern="^d{3}-d{2}-d{4}$" title="###-##-####" /> </label> <button>Register</button> </form> </body> </html> The regular expression in the form above requires the social security number to match the pattern ###-##-####: Notice that the input field includes both a pattern and a required validation attribute. If you don’t enter a value then the regular expression is never triggered. You need to include the required attribute to force a user to enter a value and cause the value to be validated against the regular expression. Custom Validation You can take advantage of the HTML5 constraint validation API to perform custom validation. You can perform any custom validation that you need. The only requirement is that you write a JavaScript function. For example, when booking a hotel room, you might want to validate that the Arrival Date is in the future instead of the past: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Constraint Validation API</title> </head> <body> <form> <label> Arrival Date: <input id="arrivalDate" type="date" required /> </label> <button>Submit Reservation</button> </form> <script type="text/javascript"> var arrivalDate = document.getElementById("arrivalDate"); arrivalDate.addEventListener("input", function() { var value = new Date(arrivalDate.value); if (value < new Date()) { arrivalDate.setCustomValidity("Arrival date must be after now!"); } else { arrivalDate.setCustomValidity(""); } }); </script> </body> </html> The form above contains an input field named arrivalDate. Entering a value into the arrivalDate field triggers the input event. The JavaScript code adds an event listener for the input event and checks whether the date entered is greater than the current date. If validation fails then the validation error message “Arrival date must be after now!” is assigned to the arrivalDate input field by calling the setCustomValidity() method of the validation constraint API. Otherwise, the validation error message is cleared by calling setCustomValidity() with an empty string. HTML5 Validation and Older Browsers But what about older browsers? For example, what about Apple Safari and versions of Microsoft Internet Explorer older than Internet Explorer 10? What the world really needs is a jQuery plugin which provides backwards compatibility for the HTML5 validation attributes. If a browser supports the HTML5 validation attributes then the plugin would do nothing. Otherwise, the plugin would add support for the attributes. Unfortunately, as far as I know, this plugin does not exist. I have not been able to find any plugin which supports both the required and pattern attributes for older browsers, but does not get in the way of these attributes in the case of newer browsers. There are several jQuery plugins which provide partial support for the HTML5 validation attributes including: · jQuery Validation — http://docs.jquery.com/Plugins/Validation · html5Form — http://www.matiasmancini.com.ar/jquery-plugin-ajax-form-validation-html5.html · h5Validate — http://ericleads.com/h5validate/ The jQuery Validation plugin – the most popular JavaScript validation library – supports the HTML5 required attribute, but it does not support the HTML5 pattern attribute. Likewise, the html5Form plugin does not support the pattern attribute. The h5Validate plugin provides the best support for the HTML5 validation attributes. The following page illustrates how this plugin supports both the required and pattern attributes: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>h5Validate</title> <style type="text/css"> .validationError { border: solid 2px red; } .validationValid { border: solid 2px green; } </style> </head> <body> <form id="customerForm"> <label> First Name: <input id="firstName" required /> </label> <label> Social Security Number: <input id="ssn" required pattern="^d{3}-d{2}-d{4}$" title="Expected pattern is ###-##-####" /> </label> <input type="submit" /> </form> <script type="text/javascript" src="Scripts/jquery-1.4.4.min.js"></script> <script type="text/javascript" src="Scripts/jquery.h5validate.js"></script> <script type="text/javascript"> // Enable h5Validate plugin $("#customerForm").h5Validate({ errorClass: "validationError", validClass: "validationValid" }); // Prevent form submission when errors $("#customerForm").submit(function (evt) { if ($("#customerForm").h5Validate("allValid") === false) { evt.preventDefault(); } }); </script> </body> </html> When an input field fails validation, the validationError CSS class is applied to the field and the field appears with a red border. When an input field passes validation, the validationValid CSS class is applied to the field and the field appears with a green border. From the perspective of HTML5 validation, the h5Validate plugin is the best of the plugins. It adds support for the required and pattern attributes to browsers which do not natively support these attributes such as IE9. However, this plugin does not include everything in my wish list for a perfect HTML5 validation plugin. Here’s my wish list for the perfect back compat HTML5 validation plugin: 1. The plugin would disable itself when used with a browser which natively supports HTML5 validation attributes. The plugin should not be too greedy – it should not handle validation when a browser could do the work itself. 2. The plugin should simulate the same user interface for displaying validation error messages as the user interface displayed by browsers which natively support HTML5 validation. Chrome, Firefox, and Internet Explorer all display validation errors in a popup. The perfect plugin would also display a popup. 3. Finally, the plugin would add support for the setCustomValidity() method and the other methods of the HTML5 validation constraint API. That way, you could implement custom validation in a standards compatible way and you would know that it worked across all browsers both old and new. Security It would be irresponsible of me to end this blog post without mentioning the issue of security. It is important to remember that any client-side validation — including HTML5 validation — can be bypassed. You should use client-side validation with the intention to create a better user experience. Client validation is great for providing a user with immediate feedback when the user is in the process of completing a form. However, client-side validation cannot prevent an evil hacker from submitting unexpected form data to your web server. You should always enforce your validation rules on the server. The only way to ensure that a required field has a value is to verify that the required field has a value on the server. The HTML5 required attribute does not guarantee anything. Summary The goal of this blog post was to describe the support for validation contained in the HTML5 standard. You learned how to use both the required and the pattern attributes in an HTML5 form. We also discussed how you can implement custom validation by taking advantage of the setCustomValidity() method. Finally, I discussed the available jQuery plugins for adding support for the HTM5 validation attributes to older browsers. Unfortunately, I am unaware of any jQuery plugin which provides a perfect solution to the problem of backwards compatibility.

    Read the article

  • Faceted search with Solr on Windows

    - by Dr.NETjes
    With over 10 million hits a day, funda.nl is probably the largest ASP.NET website which uses Solr on a Windows platform. While all our data (i.e. real estate properties) is stored in SQL Server, we're using Solr 1.4.1 to return the faceted search results as fast as we can.And yes, Solr is very fast. We did do some heavy stress testing on our Solr service, which allowed us to do over 1,000 req/sec on a single 64-bits Solr instance; and that's including converting search-url's to Solr http-queries and deserializing Solr's result-XML back to .NET objects! Let me tell you about faceted search and how to integrate Solr in a .NET/Windows environment. I'll bet it's easier than you think :-) What is faceted search? Faceted search is the clustering of search results into categories, allowing users to drill into search results. By showing the number of hits for each facet category, users can easily see how many results match that category. If you're still a bit confused, this example from CNET explains it all: The SQL solution for faceted search Our ("pre-Solr") solution for faceted search was done by adding a lot of redundant columns to our SQL tables and doing a COUNT(...) for each of those columns:   So if a user was searching for real estate properties in the city 'Amsterdam', our facet-query would be something like: SELECT COUNT(hasGarden), COUNT(has2Bathrooms), COUNT(has3Bathrooms), COUNT(etc...) FROM Houses WHERE city = 'Amsterdam' While this solution worked fine for a couple of years, it wasn't very easy for developers to add new facets. And also, performing COUNT's on all matched rows only performs well if you have a limited amount of rows in a table (i.e. less than a million). Enter Solr "Solr is an open source enterprise search server based on the Lucene Java search library, with XML/HTTP and JSON APIs, hit highlighting, faceted search, caching, replication, and a web administration interface." (quoted from Wikipedia's page on Solr) Solr isn't a database, it's more like a big index. Every time you upload data to Solr, it will analyze the data and create an inverted index from it (like the index-pages of a book). This way Solr can lookup data very quickly. To explain the inner workings of Solr is beyond the scope of this post, but if you want to learn more, please visit the Solr Wiki pages. Getting faceted search results from Solr is very easy; first let me show you how to send a http-query to Solr:    http://localhost:8983/solr/select?q=city:Amsterdam This will return an XML document containing the search results (in this example only three houses in the city of Amsterdam):    <response>     <result name="response" numFound="3" start="0">         <doc>            <long name="id">3203</long>            <str name="city">Amsterdam</str>            <str name="steet">Keizersgracht</str>            <int name="numberOfBathrooms">2</int>        </doc>         <doc>             <long name="id">3205</long>             <str name="city">Amsterdam</str>             <str name="steet">Vondelstraat</str>             <int name="numberOfBathrooms">3</int>          </doc>          <doc>             <long name="id">4293</long>             <str name="city">Amsterdam</str>             <str name="steet">Wibautstraat</str>             <int name="numberOfBathrooms">2</int>          </doc>       </result>   </response> By adding a facet-querypart for the field "numberOfBathrooms", Solr will return the facets for this particular field. We will see that there's one house in Amsterdam with three bathrooms and two houses with two bathrooms.    http://localhost:8983/solr/select?q=city:Amsterdam&facet=true&facet.field=numberOfBathrooms The complete XML response from Solr now looks like:    <response>      <result name="response" numFound="3" start="0">         <doc>            <long name="id">3203</long>            <str name="city">Amsterdam</str>            <str name="steet">Keizersgracht</str>            <int name="numberOfBathrooms">2</int>         </doc>         <doc>            <long name="id">3205</long>            <str name="city">Amsterdam</str>            <str name="steet">Vondelstraat</str>            <int name="numberOfBathrooms">3</int>         </doc>         <doc>            <long name="id">4293</long>            <str name="city">Amsterdam</str>            <str name="steet">Wibautstraat</str>            <int name="numberOfBathrooms">2</int>         </doc>      </result>      <lst name="facet_fields">         <lst name="numberOfBathrooms">            <int name="2">2</int>            <int name="3">1</int>         </lst>      </lst>   </response> Trying Solr for yourself To run Solr on your local machine and experiment with it, you should read the Solr tutorial. This tutorial really only takes 1 hour, in which you install Solr, upload sample data and get some query results. And yes, it works on Windows without a problem. Note that in the Solr tutorial, you're using Jetty as a Java Servlet Container (that's why you must start it using "java -jar start.jar"). In our environment we prefer to use Apache Tomcat to host Solr, which installs like a Windows service and works more like .NET developers expect. See the SolrTomcat page.Some best practices for running Solr on Windows: Use the 64-bits version of Tomcat. In our tests, this doubled the req/sec we were able to handle!Use a .NET XmlReader to convert Solr's XML output-stream to .NET objects. Don't use XPath; it won't scale well.Use filter queries ("fq" parameter) instead of the normal "q" parameter where possible. Filter queries are cached by Solr and will speed up Solr's response time (see FilterQueryGuidance)In my next post I’ll talk about how to keep Solr's indexed data in sync with the data in your SQL tables. Timestamps / rowversions will help you out here!

    Read the article

  • Day 2 - Game Design Documentation

    - by dapostolov
    So yesterday I didn't cut any code for my game but I was able to do a tiny bit of research on the XNA Game Development Technology and the communities out there and do you know what? I feel I'm a bit closer to my goal. The bad news is today I didn't cut code either. However, not all is lost because I wanted to get my ideas on paper and today I just did that.  Today, I began to jot down notes about the game and how I felt the visual elements would interact with each other. Unlike my workplace, my personal level of documentation is nothing more than a task list or a mind map of my ideas; it helps me streamline my solutions quiet effectively and circumvent the long process of articulating each thought to the n-th degree. I truly dislike documentation (because I have an extremely hard time articulating my thought and solutions); however, because I tend to do a really good job with documentation I tend to get stuck writing the buggers. But as a generalist remark: 'No Developer likes documentation.' For now let's stick with my basic notes and call this post a living document. Here are my notes, fresh, from after watching the new first episode of Merlin second season! Actually, a quick recommendation to anyone who is reading this (if anyone is): I truly recommend you envelope yourself in the medium or task you're trying to tackle. Be one with moment and feel it! For instance: Are you writing a fantasy script / game? What would the music of the genre sound like? For me the Conan the Barbarian soundtrack by Basil Poledouris is frackin awesome. There are many other good CD's out there, which I listen to (some who even use medival instruments, but Conan I keep returning to. It's a creative trigger for me. Ask yourself what would the imagery look like? Time to surf google for artist renditions of fantasy! What would the game feel like? Start playing some of your favorite games that inspire you, be wary though, have some self control and don't let it absorb your time. Anyhow, onto the documentation... Screens, Scenes, and Sprites. Oh My! (groan...) The first thing that came to mind were the screens, I thought the following would suffice: Menu Screen Character Customisation Screen Loading Screen? Battle Ground The Menu Screen Ok. So, the thought here is when the game loads a huge title is displayed: Wizard Wars. The player is prompted with 3 menu items: 1 Player Game, 2 Player Game, and Exit. Since I'm targetting the PC platform, as a non-networked game to start, I picture myself running my mouse over each menu option and the visual element of the menu item changes, along with a sound to indicate that I am over a curent menu item. And as I move my mouse away, it changes back, and possibly an exit mouse sound. Maybe on the screen somewhere is a brazier alit with a magical tome open right beside it, OR, maybe the tome is the menu! I hear the menu music as mellow, not obtrusive or piercing. On a menu item select, a confirmation sound bellows to indicate the players selection. The Esc key will always return me to the previous screens or desktop. The menu screen must feel...dark, like a really important ritual is about to happen and thus the music should build up. 1 Player Game - > Customize Character(s) 2 Player Game - > Customize Character(s) Exit - > Back to Windows Notes: So the first thing I pick up here are a couple things: First and foremost, my artistic abilities suck crap, so I may have to hire an artist (now that i've said that, lets get techy) graphical objects will be positioned within a scene on each screen / window. Menu items will be represented grapically, possibly animated, and have sound / animation effects triggered by user input or a time line. I have an animated scene involving a brazier or fire on a stick IF I was to move this game to the xbox, I'd have to track which menu item is currently selected (unless I do a mouse pointer type thing.) WindowObject has a scene A Scene has many GameObjects GameObject has a position graphic or animation MenuObject is a GameObject which has a mouse in, mouse out, and click event which either does something graphically (animation), does something with sound, or moves to another screen.  Character Customisation Screen With either the 1 or 2 player option selected, both selections will come to this screen; a wizard requires a name, powers, and vestements of course! Player one will configure his character first and then player two. I considered a split screen for PC but to have two people fighting over a keyboard would probably suck. For XBox, a split screen could work; maybe when I get into the networking portion (phase 2 blog?) of this game I will remove the 2 player option for PC and provide only multiplayer and I will leave 2 player for xbox...hmm... Anyhow...I picture the creation process as follows: Name: (textbox / keyboard entry) - for xbox, this would have to be different. Robe Color: (color box, or something) Stats: Speed, Oomph, and Health. (as sliders) 1 as minimum and 10 as maximum. Ok, Back, and Cancel buttons / options. Each stat has a benefit which are listed below. The idea is the player decides if he wants his wizard to run fast, be a tank and ... hit with a purse.Regardless, the player will have a pool of 12 points to use. Ideally, A balanced wizard will have 5 in each attribute. Spells? The only spell of choice is a ball of fire which comes without question. The music and screen should still feel like a ritual. The Character Speed Basically, how fast your character moves and casts. Oomph (Best Monster Truck Voice): PURE POWAH!!! The damage output of your fireball. Health How much damage you can take. Notes: I realise the game dynamics may sound uninteresting at the moment; but I think after a couple releases, we could have some other grand ideas such as: saved profiles, gold to upgrade arsenal of spells, talents, etc...but for now...a vanilla fireball thrower mage will suffice for this experiment. OK. So... a MenuObject  may need to be loosely coupled to allow future items such as networking? may be a button? a CharacterObject has a name speed oomph health and a funky robe color. cap on the three stats (1-10) an arsenal of 1 spell (possibly could expand this) The Loading Screen As is. The Battleground Screen For now, I'm keeping the screen as max resolution for the PC. The screen isn't going to move or even be a split screen. I'm not aiming high here because I want to see what level of change is involved when new features / concepts are added to game content. I'm interested to find out if we could apply techniques such as MVC or MVVM to this type of development or is it too tightly coupled? This reminds me when when my best friend and I were brainstorming our game idea (this is going back a while...1994, 6?) and he cringed at the thought of bringing business technology into games, especially when I suggested a database to store character information and COM / DCOM as the medium, but it seems I wasn't far off (reflecting); just like his implementation of a xml "config file" for dynamic direct-x menus back before .net in 1999...anyhow...i digress... The Battle One screen, two characters lobing balls of fire at each other...It doesn't get better than that. Every so often a scroll appears...and the fireballs bounce off walls, or the wizard has rapid fire, or even scrolls of healing! The scroll options are endless. Two bars at the top, each the color of the wizard (with their name beside the bar) indicate how much health they have. Possibly the appearance of the scrolls means the battle is taking too long? I'm thinking 1 player controls: up, down, left, right and space to fire the button. Or even possibly, mouse click and shift - mouse button to fire a spell in the direction they are facing. Two player controls: a, s, d, f and space AND arrows (up, down, left, right) and Del key or Crtl. The game ends when a player has 0 health and a dialog box appears asking for a rematch / reconfigure / exit. Health goes down when a fireball (friendly or not), connects with a wizard. When a wizard connects with a scroll, a countdown clock / icon appears near the health bar and the wizard begins to glow. For the most part, a wizard can have only scroll 1 effect on him at a time. Notes: Ok, there's alot to cover here. a CharacterObject is a GameObject it travels at a set velocity it travels in a direction it has sounds (walking, running, casting, impact, dying, laughing, whistling, other?) it has animations (walking, running, casting, impact, dying, laughing, idle, other?) it has a lifespan (determined by health) it is alive or dead it has a position a ScrollObject is a GameObject it carries a transferance of points "damage" (or healing, bad scroll effect?) (determinde by caster) it carries a transferance of "other" it is stationary it has a sound on impact it has a stationary animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by game) it is alive or dead it has a position a WallObject is a GameObject it has a sound on fireball impact? it is a still image / stationary it has an impact animation / or transfers an impact animation it is dead it has a position A FireBall is a GameObject it carries a transferance of poinst "damage" (or healing, bad scroll effect?) (determinde by caster) it travels at a set velocity it travels in a direction it has a sound it has a travel animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by caster) it is alive or dead it has a position As I look at this, I can see some common attributes in each object that I can carry up to the GameObject. I think I'm going to end the documentation here, it's taken me a bit of time to type this all out, tomorrow. I'll load up my IDE and my paint studio to get some good old fashioned cowboy hacking going!   D.

    Read the article

  • Ajax Control Toolkit May 2012 Release

    - by Stephen.Walther
    I’m happy to announce the May 2012 release of the Ajax Control Toolkit. This newest release of the Ajax Control Toolkit includes a new file upload control which displays file upload progress. We’ve also added several significant enhancements to the existing HtmlEditorExtender control such as support for uploading images and Source View. You can download and start using the newest version of the Ajax Control Toolkit by entering the following command in the Library Package Manager console in Visual Studio: Install-Package AjaxControlToolkit Alternatively, you can download the latest version of the Ajax Control Toolkit from CodePlex: http://AjaxControlToolkit.CodePlex.com The New Ajax File Upload Control The most requested new feature for the Ajax Control Toolkit (according to the CodePlex Issue Tracker) has been support for file upload with progress. We worked hard over the last few months to create an entirely new file upload control which displays upload progress. Here is a sample which illustrates how you can use the new AjaxFileUpload control: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="01_FileUpload.aspx.cs" Inherits="WebApplication1._01_FileUpload" %> <html> <head runat="server"> <title>Simple File Upload</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" runat="server" /> </div> </form> </body> </html> The page above includes a ToolkitScriptManager control. This control is required to use any of the controls in the Ajax Control Toolkit because this control is responsible for loading all of the scripts required by a control. The page also contains an AjaxFileUpload control. The UploadComplete event is handled in the code-behind for the page: namespace WebApplication1 { public partial class _01_FileUpload : System.Web.UI.Page { protected void ajaxUpload1_OnUploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Generate file path string filePath = "~/Images/" + e.FileName; // Save upload file to the file system ajaxUpload1.SaveAs(MapPath(filePath)); } } } The UploadComplete handler saves each uploaded file by calling the AjaxFileUpload control’s SaveAs() method with a full file path. Here’s a video which illustrates the process of uploading a file: Warning: in order to write to the Images folder on a production IIS server, you need Write permissions on the Images folder. You need to provide permissions for the IIS Application Pool account to write to the Images folder. To learn more, see: http://learn.iis.net/page.aspx/624/application-pool-identities/ Showing File Upload Progress The new AjaxFileUpload control takes advantage of HTML5 upload progress events (described in the XMLHttpRequest Level 2 standard). This standard is supported by Firefox 8+, Chrome 16+, Safari 5+, and Internet Explorer 10+. In other words, the standard is supported by the most recent versions of all browsers except for Internet Explorer which will support the standard with the release of Internet Explorer 10. The AjaxFileUpload control works with all browsers, even browsers which do not support the new XMLHttpRequest Level 2 standard. If you use the AjaxFileUpload control with a downlevel browser – such as Internet Explorer 9 — then you get a simple throbber image during a file upload instead of a progress indicator. Here’s how you specify a throbber image when declaring the AjaxFileUpload control: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="02_FileUpload.aspx.cs" Inherits="WebApplication1._02_FileUpload" %> <html> <head id="Head1" runat="server"> <title>File Upload with Throbber</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="MyThrobber" runat="server" /> <asp:Image id="MyThrobber" ImageUrl="ajax-loader.gif" Style="display:None" runat="server" /> </div> </form> </body> </html> Notice that the page above includes an image with the Id MyThrobber. This image is displayed while files are being uploaded. I use the website http://AjaxLoad.info to generate animated busy wait images. Drag-And-Drop File Upload If you are using an uplevel browser then you can drag-and-drop the files which you want to upload onto the AjaxFileUpload control. The following video illustrates how drag-and-drop works: Remember that drag-and-drop will not work on Internet Explorer 9 or older. Accepting Multiple Files By default, the AjaxFileUpload control enables you to upload multiple files at a time. When you open the file dialog, use the CTRL or SHIFT key to select multiple files. If you want to restrict the number of files that can be uploaded then use the MaximumNumberOfFiles property like this: <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="throbber" MaximumNumberOfFiles="1" runat="server" /> In the code above, the maximum number of files which can be uploaded is restricted to a single file. Restricting Uploaded File Types You might want to allow only certain types of files to be uploaded. For example, you might want to accept only image uploads. In that case, you can use the AllowedFileTypes property to provide a list of allowed file types like this: <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="throbber" AllowedFileTypes="jpg,jpeg,gif,png" runat="server" /> The code above prevents any files except jpeg, gif, and png files from being uploaded. Enhancements to the HTMLEditorExtender Over the past months, we spent a considerable amount of time making bug fixes and feature enhancements to the existing HtmlEditorExtender control. I want to focus on two of the most significant enhancements that we made to the control: support for Source View and support for uploading images. Adding Source View Support to the HtmlEditorExtender When you click the Source View tag, the HtmlEditorExtender changes modes and displays the HTML source of the contents contained in the TextBox being extended. You can use Source View to make fine-grain changes to HTML before submitting the HTML to the server. For reasons of backwards compatibility, the Source View tab is disabled by default. To enable Source View, you need to declare your HtmlEditorExtender with the DisplaySourceTab property like this: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="05_SourceView.aspx.cs" Inherits="WebApplication1._05_SourceView" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html> <head id="Head1" runat="server"> <title>HtmlEditorExtender with Source View</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:TextBox id="txtComments" TextMode="MultiLine" Columns="60" Rows="10" Runat="server" /> <ajaxToolkit:HtmlEditorExtender id="HEE1" TargetControlID="txtComments" DisplaySourceTab="true" runat="server" /> </div> </form> </body> </html> The page above includes a ToolkitScriptManager, TextBox, and HtmlEditorExtender control. The HtmlEditorExtender extends the TextBox so that it supports rich text editing. Notice that the HtmlEditorExtender includes a DisplaySourceTab property. This property causes a button to appear at the bottom of the HtmlEditorExtender which enables you to switch to Source View: Note: when using the HtmlEditorExtender, we recommend that you set the DOCTYPE for the document. Otherwise, you can encounter weird formatting issues. Accepting Image Uploads We also enhanced the HtmlEditorExtender to support image uploads (another very highly requested feature at CodePlex). The following video illustrates the experience of adding an image to the editor: Once again, for backwards compatibility reasons, support for image uploads is disabled by default. Here’s how you can declare the HtmlEditorExtender so that it supports image uploads: <ajaxToolkit:HtmlEditorExtender id="MyHtmlEditorExtender" TargetControlID="txtComments" OnImageUploadComplete="MyHtmlEditorExtender_ImageUploadComplete" DisplaySourceTab="true" runat="server" > <Toolbar> <ajaxToolkit:Bold /> <ajaxToolkit:Italic /> <ajaxToolkit:Underline /> <ajaxToolkit:InsertImage /> </Toolbar> </ajaxToolkit:HtmlEditorExtender> There are two things that you should notice about the code above. First, notice that an InsertImage toolbar button is added to the HtmlEditorExtender toolbar. This HtmlEditorExtender will render toolbar buttons for bold, italic, underline, and insert image. Second, notice that the HtmlEditorExtender includes an event handler for the ImageUploadComplete event. The code for this event handler is below: using System.Web.UI; using AjaxControlToolkit; namespace WebApplication1 { public partial class _06_ImageUpload : System.Web.UI.Page { protected void MyHtmlEditorExtender_ImageUploadComplete(object sender, AjaxFileUploadEventArgs e) { // Generate file path string filePath = "~/Images/" + e.FileName; // Save uploaded file to the file system var ajaxFileUpload = (AjaxFileUpload)sender; ajaxFileUpload.SaveAs(MapPath(filePath)); // Update client with saved image path e.PostedUrl = Page.ResolveUrl(filePath); } } } Within the ImageUploadComplete event handler, you need to do two things: 1) Save the uploaded image (for example, to the file system, a database, or Azure storage) 2) Provide the URL to the saved image so the image can be displayed within the HtmlEditorExtender In the code above, the uploaded image is saved to the ~/Images folder. The path of the saved image is returned to the client by setting the AjaxFileUploadEventArgs PostedUrl property. Not surprisingly, under the covers, the HtmlEditorExtender uses the AjaxFileUpload. You can get a direct reference to the AjaxFileUpload control used by an HtmlEditorExtender by using the following code: void Page_Load() { var ajaxFileUpload = MyHtmlEditorExtender.AjaxFileUpload; ajaxFileUpload.AllowedFileTypes = "jpg,jpeg"; } The code above illustrates how you can restrict the types of images that can be uploaded to the HtmlEditorExtender. This code prevents anything but jpeg images from being uploaded. Summary This was the most difficult release of the Ajax Control Toolkit to date. We iterated through several designs for the AjaxFileUpload control – with each iteration, the goal was to make the AjaxFileUpload control easier for developers to use. My hope is that we were able to create a control which Web Forms developers will find very intuitive. I want to thank the developers on the Superexpert.com team for their hard work on this release.

    Read the article

  • Introducing… SharePress!

    - by Bil Simser
    For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

    Read the article

  • SQLAuthority News – Memories at Anniversary of SQL Wait Stats Book

    - by pinaldave
    SQL Wait Stats About a year ago, I had very proud moment. I had published my second book SQL Server Wait Stats with me as a primary author. It has been a long journey since then. The book got great response and it was widely accepted in the community. It was first of its kind of book written specifically on Wait Stats and Performance. The book was based on my earlier month long series written on the same subject SQL Server Wait Stats. Today, on the anniversary of the book, lots of things come to my mind let me share a few here. Idea behind Blog Series A very common question I often receive is why I wrote a 30 day series on Wait Stats. There were two reasons for it. 1) I have been working with SQL Server for a long time and have troubleshoot more than hundreds of SQL Server which are related to performance tuning. It was a great experience and it taught me a lot of new things. I always documented my experience. After a while I found that I was able to completely rely on my own notes when I was troubleshooting any servers. It is right then I decided to document my experience for the community. 2) While working with wait stats there were a few things, which I thought I knew it well as they were working. However, there was always a fear in the back of mind that what happens if what I believed was incorrect and I was on the wrong path all the time. There was only one way to get it validated. Put it out in front community with my understanding and request further help to improve my understanding. It worked, it worked beautifully. I received plenty of conversations, emails and comments. I refined my content based on various conversations and make it more relevant and near accurate. I guess above two are the major reasons for beginning my journey on writing Wait Stats blog series. Idea behind Book After writing a blog series there was a good amount of request I keep on receiving that I should convert it to eBook or proper book as reading blog posts is great but it goes not give a comprehensive understanding of the subject. The very common feedback from users who were beginning the subject that they will prefer to read it in a structured method. After hearing the feedback for more than 4 months, I decided to write a book based on the blog posts. When I envisioned book, I wanted to make sure this book addresses the wait stats concepts from the fundamentals and fill the gaps of blogs I wrote earlier. Rick Morelan and Joes 2 Pros Team I must acknowledge my co-author Rick Morelan for his unconditional support in writing this book. I had already authored one book before I published this book. The experience to write the book was out of the world. Writing blog posts are much much easier than writing books. The efforts it takes to write a book is 100 times more even though the content is ready. I could have not done it myself if there was not tremendous support of my co-author and editor’s team. We spend days and days researching and discussing various concepts covered in the book. When we were in doubt we reached out to experts as well did a practical reproduction of the scenarios to validate the concepts and claims. After continuous 3 months of hard work we were able to get this book out in the community. September 1st – the lucky day Well, we had to select any day to publish the books. When book was completed in August last week we felt very glad. We all had worked hard and having a sample draft book in hand was feeling like having a newborn baby in our hand. Every time my books are published I feel the same joy which I had when my daughter was born. The feeling of holding a new book in hand is the (almost) same feeling as holding newborn baby. I am excited. For me September 1st has been the luckiest day in mind life. My daughter Shaivi was born on September 1st. Since then every September first has been excellent day and have taken me to the next step in life. I believe anything and everything I do on September 1st it is turning out to be successful and blessed. Rick and I had finished a book in the last week of August. We sent it to the publisher (printer) and asked him to take the book live as soon as possible. We did not decide on any date as we wanted the book to get out as fast as it can. Interesting enough, the publisher/printer selected September 1st for publishing the book. He published the book on 1st September and I knew it at the same time that this book will go next level. Book Model – The Most Beautiful Girl We were done with book. We had no budget left for marketing. Rick and I had a long conversation regarding how to spread the words for the book so it can reach to many people. While we were talking about marketing Rick come up with the idea that we should hire a most beautiful girl around who acknowledge our book and genuinely care for book. It was a difficult task and Rick asked me to find a more beautiful girl. I am a father and the most beautiful girl for me my daughter. This was not a difficult task for me. Rick had given me task to find the most beautiful girl and I just could not think of anyone else than my own daughter. I still do not know what Rick thought about this idea but I had already made up my mind. You can see the detailed blog post here. The Fun Experiments Book Signing Event We had lots of fun moments along this book. We have given away more books to people for free than we have sold them actually. We had done book signing events, contests, and just plain give away when we found people can be benefited from this book. There was never an intention to make money and get rich. We just wanted that more and more people know about this new concept and learn from it. Today when I look back to the earnings there is nothing much we have earned if you talk about dollars. However the best reward which we have received is the satisfaction and love of community. The amount of emails, conversations we have so far received for this book is over thousands. We had fun writing this book, it was indeed a very satisfying journey. I have earned lots of friends while learning and exploring. Availability The book is one year old but still very relevant when it is about performance tuning. It is available at various online book stores. If you have read the book, do let me know what you think of it. Amazon | Kindle | Flipkart | Indiaplaza Reference:  Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority, SQLAuthority Book Review, T SQL, Technology

    Read the article

  • The HTG Guide to Using a Bluetooth Keyboard with Your Android Device

    - by Matt Klein
    Android devices aren’t usually associated with physical keyboards. But, since Google is now bundling their QuickOffice app with the newly-released Kit-Kat, it appears inevitable that at least some Android tablets (particularly 10-inch models) will take on more productivity roles. In recent years, physical keyboards have been rendered obsolete by swipe style input methods such as Swype and Google Keyboard. Physical keyboards tend to make phones thick and plump, and that won’t fly today when thin (and even flexible and curved) is in vogue. So, you’ll be hard-pressed to find smartphone manufacturers launching new models with physical keyboards, thus rendering sliders to a past chapter in mobile phone evolution. It makes sense to ditch the clunky keyboard phone in favor of a lighter, thinner model. You’re going to carry around in your pocket or purse all day, why have that extra bulk and weight? That said, there is sound logic behind pairing tablets with keyboards. Microsoft continues to plod forward with its Surface models, and while critics continue to lavish praise on the iPad, its functionality is obviously enhanced and extended when you add a physical keyboard. Apple even has an entire page devoted specifically to iPad-compatible keyboards. But an Android tablet and a keyboard? Does such a thing even exist? They do actually. There are docking keyboards and keyboard/case combinations, there’s the Asus Transformer family, Logitech markets a Windows 8 keyboard that speaks “Android”, and these are just to name a few. So we know that keyboard products that are designed to work with Android exist, but what about an everyday Bluetooth keyboard you might use with Windows or OS X? How-To Geek wanted look at how viable it is to use such a keyboard with Android. We conducted some research and examined some lists of Android keyboard shortcuts. Most of what we found was long outdated. Many of the shortcuts don’t even apply anymore, while others just didn’t work. Regardless, after a little experimentation and a dash of customization, it turns out using a keyboard with Android is kind of fun, and who knows, maybe it will catch on. Setting things up Setting up a Bluetooth keyboard with Android is very easy. First, you’ll need a Bluetooth keyboard and of course an Android device, preferably running version 4.1 (Jelly Bean) or higher. For our test, we paired a second-generation Google Nexus 7 running Android 4.3 with a Samsung Series 7 keyboard. In Android, enable Bluetooth if it isn’t already on. We’d like to note that if you don’t normally use Bluetooth accessories and peripherals with your Android device (or any device really), it’s best practice to leave Bluetooth off because, like GPS, it drains the device’s battery more quickly. To enable Bluetooth, simply go to “Settings” -> “Bluetooth” and tap the slider button to “On”. To set up the keyboard, make sure it is on and then tap “Bluetooth” in the Android settings. On the resulting screen, your Android device should automatically search for and hopefully find your keyboard. If you don’t get it right the first time, simply turn the keyboard on again and then tap “Search for Devices” to try again. If it still doesn’t work, make sure you have fresh batteries and the keyboard isn’t paired to another device. If it is, you will need to unpair it before it will work with your Android device (consult your keyboard manufacturer’s documentation or Google if you don’t know how to do this). When Android finds your keyboard, select it under “Available Devices” … … and you should be prompted to type in a code: If successful, you will see that device is now “Connected” and you’re ready to go. If you want to test things out, try pressing the “Windows” key (“Apple” or “Command”) + ESC, and you will be whisked to your Home screen. So, what can you do? Traditional Mac and Windows users know there’s usually a keyboard shortcut for just about everything (and if there isn’t, there’s all kinds of ways to remap keys to do a variety of commands, tasks, and functions). So where does Android fall in terms of baked-in keyboard commands? There answer to that is kind of enough, but not too much. There are definitely established combos you can use to get around, but they aren’t clear and there doesn’t appear to be any one authority on what they are. Still, there is enough keyboard functionality in Android to make it a viable option, if only for those times when you need to get something done (long e-mail or important document) and an on-screen keyboard simply won’t do. It’s important to remember that Android is, and likely always will be a touch-first interface. That said, it does make some concessions to physical keyboards. In other words, you can get around Android fairly well without having to lift your hands off the keys, but you will still have to tap the screen regularly, unless you add a mouse. For example, you can wake your device by tapping a key rather than pressing its power button. However, if your device is slide or pattern-locked, then you’ll have to use the touchscreen to unlock it – a password or PIN however, works seamlessly with a keyboard – other things like widgets and app controls and features, have to be tapped. You get the idea. Keyboard shortcuts and navigation As we said, baked-in keyboard shortcut combos aren’t necessarily abundant nor apparent. The one thing you can always do is search. Any time you want to Google something, start typing from the Home screen and the search screen will automatically open and begin displaying results. Other than that, here is what we were able to figure out: ESC = go back CTRL + ESC = menu CTRL + ALT + DEL = restart (no questions asked) ALT + SPACE = search page (say “OK Google” to voice search) ALT + TAB (ALT + SHIFT + TAB) = switch tasks Also, if you have designated volume function keys, those will probably work too. There’s also some dedicated app shortcuts like calculator, Gmail, and a few others: CMD + A = calculator CMD + C = contacts CMD + E = e-mail CMD + G = Gmail CMD + L = Calendar CMD + P = Play Music CMD + Y = YouTube Overall, it’s not a long comprehensive list and there’s no dedicated keyboard combos for the full array of Google’s products. Granted, it’s hard to imagine getting a lot of mileage out of a keyboard with Maps but with something like Keep, you could type out long, detailed lists on your tablet, and then view them on your smartphone when you go out shopping. You can also use the arrow keys to navigate your Home screen over shortcuts and open the app drawer. When something on the screen is selected, it will be highlighted in blue. Press “Enter” to open your selection. Additionally, if an app has its own set of shortcuts, e.g. Gmail has quite a few unique shortcuts to it, as does Chrome, some – though not many – will work in Android (not for YouTube though). Also, many “universal” shortcuts such as Copy (CTRL + C), Cut (CTRL + X), Paste (CTRL + V), and Select All (CTRL + A) work where needed – such as in instant messaging, e-mail, social media apps, etc. Creating custom application shortcuts What about custom shortcuts? When we were researching this article, we were under the impression that it was possible to assign keyboard combinations to specific apps, such as you could do on older Android versions such as Gingerbread. This no long seems to be the case and nowhere in “Settings” could we find a way to assign hotkey combos to any of our favorite, oft-used apps or functions. If you do want custom keyboard shortcuts, what can you do? Luckily, there’s an app on Google Play that allows you to, among other things, create custom app shortcuts. It is called External Keyboard Helper (EKH) and while there is a free demo version, the pay version is only a few bucks. We decided to give EKH a whirl and through a little experimentation and finally reading the developer’s how-to, we found we could map custom keyboard combos to just about anything. To do this, first open the application and you’ll see the main app screen. Don’t worry about choosing a custom layout or anything like that, you want to go straight to the “Advanced settings”: In the “Advanced settings” select “Application shortcuts” to continue: You can have up to 16 custom application shortcuts. We are going to create a custom shortcut to the Facebook app. We choose “A0”, and from the resulting list, Facebook. You can do this for any number of apps, services, and settings. As you can now see, the Facebook app has now been linked to application-zero (A0): Go back to the “Advanced settings” and choose “Customize keyboard mappings”: You will be prompted to create a custom keyboard layout so we choose “Custom 1”: When you choose to create a custom layout, you can do a great many more things with your keyboard. For example, many keyboards have predefined function (Fn) keys, which you can map to your tablet’s brightness controls, toggle WiFi on/off, and much more. A word of advice, the application automatically remaps certain keys when you create a custom layout. This might mess up some existing keyboard combos. If you simply want to add some functionality to your keyboard, you can go ahead and delete EKH’s default changes and start your custom layout from scratch. To create a new combo, select “Add new key mapping”: For our new shortcut, we are going to assign the Facebook app to open when we key in “ALT + F”. To do this, we press the “F” key while in the “Scancode” field and we see it returns a value of “33”. If we wanted to use a different key, we can press “Change” and scan another key’s numerical value. We now want to assign the “ALT” key to application “A0”, previously designated as the Facebook app. In the “AltGr” field, we enter “A0” and then “Save” our custom combo. And now we see our new application shortcut. Now, as long as we’re using our custom layout, every time we press “ALT + F”, the Facebook app will launch: External Keyboard Helper extends far beyond simple application shortcuts and if you are looking for deeper keyboard customization options, you should definitely check it out. Among other things, EKH also supports dozens of languages, allows you to quickly switch between layouts using a key or combo, add up to 16 custom text shortcuts, and much more! It can be had on Google Play for $2.53 for the full version, but you can try the demo version for free. More extensive documentation on how to use the app is also available. Android? Keyboard? Sure, why not? Unlike traditional desktop operating systems, you don’t need a physical keyboard and mouse to use a mobile operating system. You can buy an iPad or Nexus 10 or Galaxy Note, and never need another accessory or peripheral – they work as intended right out of the box. It’s even possible you can write the next great American novel on one these devices, though that might require a lot of practice and patience. That said, using a keyboard with Android is kind of fun. It’s not revelatory but it does elevate the experience. You don’t even need to add customizations (though they are nice) because there are enough existing keyboard shortcuts in Android to make it usable. Plus, when it comes to inputting text such as in an editor or terminal application, we fully advocate big, physical keyboards. Bottom line, if you’re looking for a way to enhance your Android tablet, give a keyboard a chance. Do you use your Android device for productivity? Is a physical keyboard an important part of your setup? Do you have any shortcuts that we missed? Sound off in the comments and let us know what you think.     

    Read the article

  • Anti-Forgery Request Recipes For ASP.NET MVC And AJAX

    - by Dixin
    Background To secure websites from cross-site request forgery (CSRF, or XSRF) attack, ASP.NET MVC provides an excellent mechanism: The server prints tokens to cookie and inside the form; When the form is submitted to server, token in cookie and token inside the form are sent in the HTTP request; Server validates the tokens. To print tokens to browser, just invoke HtmlHelper.AntiForgeryToken():<% using (Html.BeginForm()) { %> <%: this.Html.AntiForgeryToken(Constants.AntiForgeryTokenSalt)%> <%-- Other fields. --%> <input type="submit" value="Submit" /> <% } %> This invocation generates a token then writes inside the form:<form action="..." method="post"> <input name="__RequestVerificationToken" type="hidden" value="J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP" /> <!-- Other fields. --> <input type="submit" value="Submit" /> </form> and also writes into the cookie: __RequestVerificationToken_Lw__= J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP When the above form is submitted, they are both sent to server. In the server side, [ValidateAntiForgeryToken] attribute is used to specify the controllers or actions to validate them:[HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult Action(/* ... */) { // ... } This is very productive for form scenarios. But recently, when resolving security vulnerabilities for Web products, some problems are encountered. Specify validation on controller (not on each action) The server side problem is, It is expected to declare [ValidateAntiForgeryToken] on controller, but actually it has be to declared on each POST actions. Because POST actions are usually much more then controllers, the work would be a little crazy. Problem Usually a controller contains actions for HTTP GET and actions for HTTP POST requests, and usually validations are expected for HTTP POST requests. So, if the [ValidateAntiForgeryToken] is declared on the controller, the HTTP GET requests become invalid:[ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public class SomeController : Controller // One [ValidateAntiForgeryToken] attribute. { [HttpGet] public ActionResult Index() // Index() cannot work. { // ... } [HttpPost] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] public ActionResult PostAction2(/* ... */) { // ... } // ... } If browser sends an HTTP GET request by clicking a link: http://Site/Some/Index, validation definitely fails, because no token is provided. So the result is, [ValidateAntiForgeryToken] attribute must be distributed to each POST action:public class SomeController : Controller // Many [ValidateAntiForgeryToken] attributes. { [HttpGet] public ActionResult Index() // Works. { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction2(/* ... */) { // ... } // ... } This is a little bit crazy, because one application can have a lot of POST actions. Solution To avoid a large number of [ValidateAntiForgeryToken] attributes (one for each POST action), the following ValidateAntiForgeryTokenWrapperAttribute wrapper class can be helpful, where HTTP verbs can be specified:[AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, AllowMultiple = false, Inherited = true)] public class ValidateAntiForgeryTokenWrapperAttribute : FilterAttribute, IAuthorizationFilter { private readonly ValidateAntiForgeryTokenAttribute _validator; private readonly AcceptVerbsAttribute _verbs; public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs) : this(verbs, null) { } public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs, string salt) { this._verbs = new AcceptVerbsAttribute(verbs); this._validator = new ValidateAntiForgeryTokenAttribute() { Salt = salt }; } public void OnAuthorization(AuthorizationContext filterContext) { string httpMethodOverride = filterContext.HttpContext.Request.GetHttpMethodOverride(); if (this._verbs.Verbs.Contains(httpMethodOverride, StringComparer.OrdinalIgnoreCase)) { this._validator.OnAuthorization(filterContext); } } } When this attribute is declared on controller, only HTTP requests with the specified verbs are validated:[ValidateAntiForgeryTokenWrapper(HttpVerbs.Post, Constants.AntiForgeryTokenSalt)] public class SomeController : Controller { // GET actions are not affected. // Only HTTP POST requests are validated. } Now one single attribute on controller turns on validation for all POST actions. Maybe it would be nice if HTTP verbs can be specified on the built-in [ValidateAntiForgeryToken] attribute, which is easy to implemented. Specify Non-constant salt in runtime By default, the salt should be a compile time constant, so it can be used for the [ValidateAntiForgeryToken] or [ValidateAntiForgeryTokenWrapper] attribute. Problem One Web product might be sold to many clients. If a constant salt is evaluated in compile time, after the product is built and deployed to many clients, they all have the same salt. Of course, clients do not like this. Even some clients might want to specify a custom salt in configuration. In these scenarios, salt is required to be a runtime value. Solution In the above [ValidateAntiForgeryToken] and [ValidateAntiForgeryTokenWrapper] attribute, the salt is passed through constructor. So one solution is to remove this parameter:public class ValidateAntiForgeryTokenWrapperAttribute : FilterAttribute, IAuthorizationFilter { public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs) { this._verbs = new AcceptVerbsAttribute(verbs); this._validator = new ValidateAntiForgeryTokenAttribute() { Salt = AntiForgeryToken.Value }; } // Other members. } But here the injected dependency becomes a hard dependency. So the other solution is moving validation code into controller to work around the limitation of attributes:public abstract class AntiForgeryControllerBase : Controller { private readonly ValidateAntiForgeryTokenAttribute _validator; private readonly AcceptVerbsAttribute _verbs; protected AntiForgeryControllerBase(HttpVerbs verbs, string salt) { this._verbs = new AcceptVerbsAttribute(verbs); this._validator = new ValidateAntiForgeryTokenAttribute() { Salt = salt }; } protected override void OnAuthorization(AuthorizationContext filterContext) { base.OnAuthorization(filterContext); string httpMethodOverride = filterContext.HttpContext.Request.GetHttpMethodOverride(); if (this._verbs.Verbs.Contains(httpMethodOverride, StringComparer.OrdinalIgnoreCase)) { this._validator.OnAuthorization(filterContext); } } } Then make controller classes inheriting from this AntiForgeryControllerBase class. Now the salt is no long required to be a compile time constant. Submit token via AJAX For browser side, once server side turns on anti-forgery validation for HTTP POST, all AJAX POST requests will fail by default. Problem In AJAX scenarios, the HTTP POST request is not sent by form. Take jQuery as an example:$.post(url, { productName: "Tofu", categoryId: 1 // Token is not posted. }, callback); This kind of AJAX POST requests will always be invalid, because server side code cannot see the token in the posted data. Solution Basically, the tokens must be printed to browser then sent back to server. So first of all, HtmlHelper.AntiForgeryToken() need to be called somewhere. Now the browser has token in both HTML and cookie. Then jQuery must find the printed token in the HTML, and append token to the data before sending:$.post(url, { productName: "Tofu", categoryId: 1, __RequestVerificationToken: getToken() // Token is posted. }, callback); To be reusable, this can be encapsulated into a tiny jQuery plugin:/// <reference path="jquery-1.4.2.js" /> (function ($) { $.getAntiForgeryToken = function (tokenWindow, appPath) { // HtmlHelper.AntiForgeryToken() must be invoked to print the token. tokenWindow = tokenWindow && typeof tokenWindow === typeof window ? tokenWindow : window; appPath = appPath && typeof appPath === "string" ? "_" + appPath.toString() : ""; // The name attribute is either __RequestVerificationToken, // or __RequestVerificationToken_{appPath}. tokenName = "__RequestVerificationToken" + appPath; // Finds the <input type="hidden" name={tokenName} value="..." /> from the specified. // var inputElements = $("input[type='hidden'][name='__RequestVerificationToken" + appPath + "']"); var inputElements = tokenWindow.document.getElementsByTagName("input"); for (var i = 0; i < inputElements.length; i++) { var inputElement = inputElements[i]; if (inputElement.type === "hidden" && inputElement.name === tokenName) { return { name: tokenName, value: inputElement.value }; } } return null; }; $.appendAntiForgeryToken = function (data, token) { // Converts data if not already a string. if (data && typeof data !== "string") { data = $.param(data); } // Gets token from current window by default. token = token ? token : $.getAntiForgeryToken(); // $.getAntiForgeryToken(window). data = data ? data + "&" : ""; // If token exists, appends {token.name}={token.value} to data. return token ? data + encodeURIComponent(token.name) + "=" + encodeURIComponent(token.value) : data; }; // Wraps $.post(url, data, callback, type). $.postAntiForgery = function (url, data, callback, type) { return $.post(url, $.appendAntiForgeryToken(data), callback, type); }; // Wraps $.ajax(settings). $.ajaxAntiForgery = function (settings) { settings.data = $.appendAntiForgeryToken(settings.data); return $.ajax(settings); }; })(jQuery); In most of the scenarios, it is Ok to just replace $.post() invocation with $.postAntiForgery(), and replace $.ajax() with $.ajaxAntiForgery():$.postAntiForgery(url, { productName: "Tofu", categoryId: 1 }, callback); // Token is posted. There might be some scenarios of custom token, where $.appendAntiForgeryToken() is useful:data = $.appendAntiForgeryToken(data, token); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); And there are scenarios that the token is not in the current window. For example, an HTTP POST request can be sent by an iframe, while the token is in the parent window. Here, token's container window can be specified for $.getAntiForgeryToken():data = $.appendAntiForgeryToken(data, $.getAntiForgeryToken(window.parent)); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); If you have better solution, please do tell me.

    Read the article

  • Add Free Google Apps to Your Website or Blog

    - by Matthew Guay
    Would you like to have an email address from your own domain, but prefer Gmail’s interface and integration with Google Docs?  Here’s how you can add the free Google Apps Standard to your site and get the best of both worlds. Note: To signup for Google Apps and get it setup on your domain, you will need to be able to add info to your WordPress blog or change Domain settings manually. Getting Started Head to the Google Apps signup page (link below), and click the Get Started button on the right.  Note that we are signing up for the free Google Apps which allows a max of 50 users; if you need more than 50 email addresses for your domain, you can choose Premiere Edition instead for $50/year. Select that you are the Administrator of the domain, and enter the domain or subdomain you want to use with Google Apps.  Here we’re adding Google Apps to the techinch.com site, but we could instead add Apps to mail.techinch.com if needed…click Get Started. Enter your name, phone number, an existing email address, and other Administrator information.  The Apps signup page also includes some survey questions about your organization, but you only have to fill in the required fields. On the next page, enter a username and password for the administrator account.  Note that the user name will also be the administrative email address as [email protected]. Now you’re ready to authenticate your Google Apps account with your domain.  The steps are slightly different depending on whether your site is on WordPress.com or on your own hosting service or server, so we’ll show how to do it both ways.   Authenticate and Integrate Google Apps with WordPress.com To add Google Apps to a domain you have linked to your WordPress.com blog, select Change yourdomain.com CNAME record and click Continue. Copy the code under #2, which should be something like googleabcdefg123456.  Do not click the button at the bottom; wait until we’ve completed the next step.   Now, in a separate browser window or tab, open your WordPress Dashboard.  Click the arrow beside Upgrades, and select Domains from the menu. Click the Edit DNS link beside the domain name you’re adding to Google Apps. Scroll down to the Google Apps section, and paste your code from Google Apps into the verification code field.  Click Generate DNS records when you’re done. This will add the needed DNS settings to your records in the box above the Google Apps section.  Click Save DNS records. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Authenticate Google Apps on Your Own Server If your website is hosted on your own server or hosting account, you’ll need to take a few more steps to add Google Apps to your domain.  You can add a CNAME record to your domain host using the same information that you would use with a WordPress account, or you can upload an HTML file to your site’s main directory.  In this test we’re going to upload an HTML file to our site for verification. Copy the code under #1, which should be something like googleabcdefg123456.  Do not click the button at the bottom; wait until we’ve completed the next step first. Create a new HTML file and paste the code in it.  You can do this easily in Notepad: create a new document, paste the code, and then save as googlehostedservice.html.  Make sure to select the type as All Files or otherwise the file will have a .txt extension. Upload this file to your web server via FTP or a web dashboard for your site.  Make sure it is in the top level of your site’s directory structure, and try visiting it at yoursite.com/googlehostedservice.html. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Setup Your Email on Google Apps When this is done, your Google Apps account should be activated and ready to finish setting up.  Google Apps will offer to launch a guide to step you through the rest of the process; you can click Launch guide if you want, or click Skip this guide to continue on your own and go directly to the Apps dashboard.   If you choose to open the guide, you’ll be able to easily learn the ropes of Google Apps administration.  Once you’ve completed the tutorial, you’ll be taken to the Google Apps dashboard. Most of the Google Apps will be available for immediate use, but Email may take a bit more setup.  Click Activate email to get your Gmail-powered email running on your domain.    Add Google MX Records to Your Server You will need to add Google MX records to your domain registrar in order to have your mail routed to Google.  If your domain is hosted on WordPress.com, you’ve already made these changes so simply click I have completed these steps.  Otherwise, you’ll need to manually add these records before clicking that button.   Adding MX Entries is fairly easy, but the steps may depend on your hosting company or registrar.  With some hosts, you may have to contact support to have them add the MX records for you.  Our site’s host uses the popular cPanel for website administration, so here’s how we added the MX Entries through cPanel. Add MX Entries through cPanel Login to your site’s cPanel, and click the MX Entry link under Mail. Delete any existing MX Records for your domain or subdomain first to avoid any complications or interactions with Google Apps.  If you think you may want to revert to your old email service in the future, save a copy of the records so you can switch back if you need. Now, enter the MX Records that Google listed.  Here’s our account after we added all of the entries to our account. Finally, return to your Google Apps Dashboard and click the I have completed these steps button at the bottom of the page. Activating Service You’re now officially finished activating and setting up your Google Apps account.  Google will first have to check the MX records for your domain; this only took around an hour in our test, but Google warns it can take up to 48 hours in some cases. You may then see that Google is updating its servers with your account information.  Once again, this took much less time than Google’s estimate. When everything’s finished, you can click the link to access the inbox of your new Administrator email account in Google Apps. Welcome to Gmail … at your own domain!  All of the Google Apps work just the same in this version as they do in the public @gmail.com version, so you should feel right at home. You can return to the Google Apps dashboard from the Administrative email account by clicking the Manage this domain at the top right. In the Dashboard, you can easily add new users and email accounts, as well as change settings in your Google Apps account and add your site’s branding to your Apps. Your Google Apps will work just like their standard @gmail.com counterparts.  Here’s an example of an inbox customized with the techinch logo and a Gmail theme. Links to Remember Here are the common links to your Google Apps online.  Substitute your domain or subdomain for yourdomain.com. Dashboard https://www.google.com/a/cpanel/yourdomain.com Email https://mail.google.com/a/yourdomain.com Calendar https://www.google.com/calendar/hosted/yourdomain.com Docs https://docs.google.com/a/yourdomain.com Sites https://sites.google.com/a/yourdomain.com Conclusion Google Apps offers you great webapps and webmail for your domain, and let’s you take advantage of Google’s services while still maintaining the professional look of your own domain.  Setting up your account can be slightly complicated, but once it’s finished, it will run seamlessly and you’ll never have to worry about email or collaboration with your team again. Signup for the free Google Apps Standard Similar Articles Productive Geek Tips Mysticgeek Blog: Create Your Own Simple iGoogle GadgetAccess Your Favorite Google Services in Chrome the Easy WayRevo Uninstaller Pro [REVIEW]Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPFind Similar Websites in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox

    Read the article

  • CodePlex Daily Summary for Wednesday, December 08, 2010

    CodePlex Daily Summary for Wednesday, December 08, 2010Popular ReleasesAlgorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.SubtitleTools: SubtitleTools 1.1: Added a better ToUTF-8 converter (not just from windows-1256 to utf-8). Refactored OpenFileDialogs to a more MVVM friendly behavior.SuperSocket, an extensible socket application framework: SuperSocket 1.0 SP1: Fixed bugs: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration valueHydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.1.340: HydroDesktop 1.1 Stable Release (Build 340)CslaGenFork: CslaGenFork 4.0 CTP 2: The version is 4.0.1 CTP2 and was released 2010 December 7 and includes the following files: CslaGenFork 4.0.1-2010-12-07 Setup.msi Templates-2010-10-07.zip For getting started instructions, refer to How to section. Overview of the changes Since CTP1 there were 53 work items closed (28 features, 24 issues and 1 task). During this 60 days a lot of work has been done on several areas. First the stereotypes: EditableRoot is OK EditableChild is OK EditableRootCollection is OK Editable...My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.EnhSim: EnhSim 2.2.0 ALPHA: 2.2.0 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated En...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).TweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...MiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (December 2010): The release is targetted for stable daily use. With improved performance and enhanced compatibility with several latest PHP open source applications; it makes this release perfect replacement of your old PHP runtime. Changes made within this release include following and much more: Performance improvements based on real-world applications experience. We determined biggest bottlenecks and we found and removed overheads causing performance problems in many PHP applications. Reimplemented nat...Chronos WPF: Chronos v2.0 Beta 3: Release notes: Updated introduction document. Updated Visual Studio 2010 Extension (vsix) package. Added horizontal scrolling to the main window TaskBar. Added new styles for ListView, ListViewItem, GridViewColumnHeader, ... Added a new WindowViewModel class (allowing to fetch data). Added a new Navigate method (with several overloads) to the NavigationViewModel class (protected). Reimplemented Task usage for the WorkspaceViewModel.OnDelete method. Removed the reflection effect...MDownloader: MDownloader-0.15.26.7024: Fixed updater; Fixed MegauploadDJ - jQuery WebControls for ASP.NET: DJ 1.2: What is new? Update to support jQuery 1.4.2 Update to support jQuery ui 1.8.6 Update to Visual Studio 2010 New WebControls with samples added Autocomplete WebControl Button WebControl ToggleButt WebControl The example web site is including in source code project.LateBindingApi.Excel: LateBindingApi.Excel Release 0.7g: Unterschiede zur Vorgängerversion: - Zusätzliche Interior Properties - Group / Ungroup Methoden für Range - Bugfix COM Reference Handling für Application Objekt in einigen Klassen Release+Samples V0.7g: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, P...ESRI ArcGIS Silverlight Toolkit: November 2010 - v2.1: ESRI ArcGIS Silverlight Toolkit v2.1 Added Windows Phone 7 build. New controls added: InfoWindow ChildPage (Windows Phone 7 only) See what's new here full details for : http://help.arcgis.com/en/webapi/silverlight/help/#/What_s_new_in_2_1/016600000025000000/ Note: Requires Visual Studio 2010, .NET 4.0 and Silverlight 4.0.ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.1: Atomic CMS 2.1.1 release notes Atomic CMS installation guide New ProjectsCore Motives Tracking Web Part: This C# web part was created to allow users of SharePoint 2007 to place CoreMotives (http://www.coremotives.com) tracking code on any web part page. Can also be used in master pages and page layouts.CPEBook: OsefEatFrsh: Keep Track of contents of your Fridge. Eat items while they are still fresh.ENUH10Publisher: Et prosjekt for studenter ved eCademy H10EVE Community Portal: EVE Community Portal is a complete community portal for EVE alliances (and corporations), which will host everything an eve alliance needs, from a forum and blogs to every tool you could whish for and more...FER CSLA.NET Compact: .NET Compact Framework edition of CSLA.NET application framework.Finger Mouse: it's a good idea and simple program help you to use the mouse feature from webcam (without mouse) note : you should have i3 or higher processorGambaru: Gambaru é um techdemo de um game 3D desenvolvido em Delphi. Utiliza engine de física Newton e Open GL (pacote GL-Scene). Foi apresentado como trabalho de conclusão de curso no SENAC-SP por Marcelo, Daniel e Thais em 2007. Exploramos o universo Samurai. Contribua, programe, sonhe!GameBoyEmu: ????,GameBoy ???GenericList Inherits IDataReader ( ListEx<T>() : IDataReader ): This Generic List implements the IDataReader interface and displays the usage of Linq, Lamba expressions and some creative thought around working with collection types. I hope it can serve as reference to your projects.Guard: Provides the argument validation class Guard, ubiquitously used throughout all .NET projects but with no central place for updates.HolidayChecker Library: HolidayChecker Library is a usefull library that allows programmers to know if a certain date is a festivity or not. This library also allows the calculation of Easter day based on the algorithm of Tondering. It's developed in C#.JuniorTour - Junior Golf Tour Silverlight Application: JuniorTour makes it easier for golf tour operators to publish tournament results for multiple divisions and multiple seasons. You'll no longer have to manually edit player pages, tournament results, or compute rankings. It's developed in C# and Silverlight.LibGT: LibGT aims to reduce the amount of overall code a programmer has to write in C#. This library provides many shortcuts and extension methods to facilitate robust development rapidly even without the use of an IDE.Mayhem: Mayhem makes it simple for end users to control complex events with their PCs. Whether you want to Update a Twitter status when your cat is detected by your webcam or monitor your serial ports and trigger events, it's no problem with Mayhem -- wreak your own personal havoc.mmht: ???????,??????MobilePolice: my mobilepolice projectOpenCallback: This is a implementation of the callback handler pattern that allows you to invoke the callback handle methods with out type switching or if...else if chains.Project Baron: Simple, yet powerful Project Management System.PS3Lib for SDK 1.92: Création d'une librairie de ceveloppement pour le SDK 1.92Remote Controller for Trackmania: Evzrecon is a remote controller for Trackmania Forever dedicated servers, much like XASECO but written in Java.SharePointSocial: SharePointSocial is focused on taking social interaction within SharePoint to the next level, extending beyond the corporate boundaries. Corporate listening, one-click interaction through key social media outlets and data-driven management and reporting are planned features.SIGS: ssSimple Routing: Simple Routing allows you to associate arbitrary routes with static methods in an ASP.NET application through attribution.SlimCRM: Aplicación de referencia de buenas prácticas de programaciónTalkBoard: ????????,?????????!uHelpsy - Umbraco Helper Library: uHelpsy is a tiny (but growing) library which makes programatically interacting with Umbraco 4.5.2 much more pleasant. It provides helper methods for creating and updating nodes, working with the Umbraco cache, and dealing with unpublished nodes. VCSS: VCSS is a decorated version of CSS (Cascading Style Sheets) that allows you to specify variables and also nest rules. The VCSS file can be compiled into a standard CSS file to be used on any website.Vote: ?,???????????????!WP7 GPS Simulator: Use this project to simulate GPS while doing development on your Windows Phone 7.WPF_CAD: this proyect it's a college proyect form grafic computer course. Consist in the development of a cad soft implementing all grafics algoritms.Xml-Racing: Réaliser une application Web 3-tiers qui permette d'interroger une BD et de restituer les infos sous forme de graphiques et cartes.

    Read the article

  • CodePlex Daily Summary for Tuesday, March 30, 2010

    CodePlex Daily Summary for Tuesday, March 30, 2010New ProjectsCloudMail: Want to send email from Azure? Cloud Mail is designed to provide a small, effective and reliable solution for sending email from the Azure platfor...CommunityServer Extensions: Here you can find some CommunityServer extensions and bug fixes. The main goal is to provide you with the ability to correct some common problems...ContactSync: ContactSync is a set of .NET libraries, UI controls and applications for managing and synchronizing contact information. It includes managed wrapp...Dng portal: DNG Portal base on asp.net MVCDotNetNuke Referral Tracker: The Referral Tracker module allows you to save URL variables, the referring page, and the previous page into a session variable or cookie. Then, th...Foursquare for Windows Phone 7: Foursquare for Windows Phone 7.GEGetDocConfig: SharePoint utility to list information concerning document libraries in one or more sites. Displays Size, Validity, Folder, Parent, Author, Minor a...Google Maps API for .NET: Fast and lightweight client libraries for Google Maps API.kbcchina: kbc chinaLoad Test User Mock Toolkits: 用途 This project is a framework mocking the user actvities with VSTS Load Test tool to faster the test script development. 此项目包括一套模拟用户行为的通用框架,可以简化...Resonance: Resonance is a system to train neural networks, it allows to automate the train of a neural network, distributing the calculation on multiple machi...SharePoint Company Directory / Active Directory Self Service System: This is a very simple system which was designed for a Bank to allow users to update their contact information within SharePoint . Then this info ca...SmartShelf: Manage files and folders on Windows and Windows Live.sysFix: sysFix is a tool for system administrators to easily manage and fix common system errors.xnaWebcam: Webcam usage in XNA GameStudio 3.1New ReleasesAll-In-One Code Framework: All-In-One Code Framework 2010-03-29: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Samples for Azure Name Des...ARSoft.Tools.Net - C# DNS and SPF Library: 1.3.0: Added support for creating own dns server implementations. Added full IPv6 support to dns client Some performance optimizations to dns clientArtefact Animator: Artefact Animator - Silverlight 3 and WPF .Net 3.5: Artefact Animator Version 2.0.4.1 Silverlight 3 ArtefactSL.dll for both Debug and Release. WPF 3.5 Artefact.dll for both Debug and Release.BatterySaver: Version 0.4: Added support for a system tray icon for controlling the application and switching profiles (Issue)BizTalk Server 2006 Orchestration Profiler: Profiler v1.2: This is a point release of the profiler and has been updatd to work on 64 bit systems. No other new functionality is available. To use this ensure...CloudMail: CloudMail_0.5_beta: Initial public release. For documentation see http://cloudmail.codeplex.com/documentation.CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.44: See Source Code tab for recent change history.Dawf: Dual Audio Workflow: Beta 2: Fix little bugs and improve usablity by changing the way it finds the good audio.DotNetNuke Referral Tracker: 2.0.1: First releaseFoursquare for Windows Phone 7: Foursquare 2010.03.29.02: Foursquare 2010.03.29.02GEGetDocConfig: GEGETDOCCONFIG.ZIP: Installation: Simply download the zip file and extract the executable into its own directory on the SharePoint front end server Note: There will b...GKO Libraries: GKO Libraries 0.2 Beta: Added: Binary search Unmanaged wrappers, interop and pinvoke functions and structures Windows service wrapper Video mode helpers and more.....Google Maps API for .NET: GoogleMapsForNET v0.9 alpha release: First version, contains Core library featuring: Geocoding API Elevation API Static Maps APIGoogle Maps API for .NET: GoogleMapsForNET v0.9.1 alpha release: Fixed dependencies issues; added NUnit binaries and updated Newtonsoft Json library.Google Maps API for .NET: GoogleMapsForNET v0.9.2a alpha release: Recommended update.Code clean-up; did refactoring and major interface changes in Static Maps because it wasn't aligned to the 'simplest and least r...Home Access Plus+: v3.2.0.0: v3.2.0.0 Release Change Log: More AJAX to reduce page refreshes (Deleting, New Folder, Rename moved from browser popups) Only 3 Browser Popups (1...Html to OpenXml: HtmlToOpenXml 1.1: The dll library to include in your project. The dll is signed for GAC support. Compiled with .Net 3.5, Dependencies on System.Drawing.dll and Docu...Latent Semantic Analysis: Latest sources: Just the latest sources. Just click the changeset. Please note that in order to compile this code you need to download some additional code. You ...Load Test User Mock Toolkits: Load Test User Mock Toolkits Help Doc: Samples and The framework introduction. 包括框架介绍和典型示例Load Test User Mock Toolkits: Open.LoadTest.User.Mock.Toolkits 1.0 alpha: 此版本为非正式版本,未对性能方面进行优化。而且框架正在重构调整中。Mobile Broadband Logging Monitor: Mobile Broadband Logging Monitor 1.2.4: This edition supports: Newer and older editions of Birdstep Technology's EasyConnect HUAWEI Mobile Partner MWConn User defined location for s...Nito.KitchenSink: Version 3: Added Encoding.GetString(Stream, bool) for converting an entire stream into a string. Changed Stream.CopyTo to allow the stream to be closed/abor...Numina Application Framework: Numina.Framework Core 49088: Fixed Bug with Headers introduced in rev. 48249 with change to HttpUtil class. admin/User_Pending.aspx page users weren't able to be deleted Do...OAuthLib: OAuthLib (1.6.4.0): Fix for 6390 Make it possible to configure time out value.Quack Quack Says the Duck: Quack Quack Says The Duck 1.1.0.0: This new release pushes some work onto a background thread clearing issues with multiple screen clicks while the UI was blocking.Rapidshare Episode Downloader: RED v0.8.4: - Added Edit feature - Moved season & episode int to string into a separate function - Fixed some more minor issues - Added 'Previous' feature - F...RoTwee: RoTwee (8.1.3.0): Update OAuthLib to 1.6.4.0SharePoint Company Directory / Active Directory Self Service System: SharePoint Company Directory with AD Import: This is a very simple system which was designed for a Bank to allow users to update their contact information within SharePoint . Then this info ca...Simply Classified: v1.00.12: Comsite Simply Classified v1.00.12 - STABLE - Tested against DotNetNuke v4.9.5 and v5.2.x Bug Fixes/Enhancements: BUGFIX: Resolved issues with 1...sPATCH: sPatch v0.9: Completely Recoded with wxWidgetsFollowing Content is different to .NET Patcher no requirement for .NET Framework Manual patch was removed to av...SSAS Profiler Trace Scheduler: SSAS Profiler Trace Scheduler: AS Profiler Scheduler is a tool that will enable Scheduling of SQL AS Tracing using predefined Profiler Templates. For tracking different issues th...sysFix: sysfix build v5: A stable beta release, please refer to home page for further details.VOB2MKV: vob2mkv-1.0.4: This is a feature update of the VOB2MKV utility. The command-line parsing in the VOB2MKV application has been greatly improved. You can now get f...xnaWebcam: xnaWebcam 0.1: xnaWebcam 0.1 Program Version 0.1: -Show Webcam Device -Draw.String WebcamTexture.VideoDevice.Name.ToString() Instructions: 1. Plug-in your Webca...xnaWebcam: xnaWebcam 0.2: xnaWebcam 0.2 Version 0.2: -setResolution -Keys.Escape: this.Exit() << Exit the Game/Application. --- Version 0.1: -Show Webcam Device -Draw.Strin...xnaWebcam: xnaWebcam 0.21: xnaWebcam 0.2 Version 0.21: -Fix: Don't quit game/application after closing mainGameWindow -Fix: Text Position; Window.X, Window.Y --- Version 0.2...Xploit Game Engine: Xploit_1_1 Release: Added Features Multiple Mesh instancing.Xploit Game Engine: Xploit_1_1 Source Code: Updates Create multiple instances of the same Meshe using XModelMesh and XSkinnedMesh.Yakiimo3D: DX11 DirectCompute Buddhabrot Source and Binary: DX11 DirectCompute Buddhabrot/Nebulabrot source and binary.Most Popular ProjectsRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)LiveUpload to FacebookASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBlogEngine.NETLINQ to TwitterManaged Extensibility FrameworkMicrosoft Biology FoundationFarseer Physics EngineN2 CMSNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise Library

    Read the article

  • jQuery Treeview – Expand and Collapse All Without the TreeControl

    - by Ben Griswold
    The jQuery Treeview Plugin provides collapse all, expand all and toggle all support with very little effort on your part. Simply add a treecontrol with three links, and the treeview, to your page…   <div id="treecontrol">     <a title="Collapse the entire tree below" href="#"><img src="../images/minus.gif" /> Collapse All</a>     <a title="Expand the entire tree below" href="#"><img src="../images/plus.gif" /> Expand All</a>     <a title="Toggle the tree below, opening closed branches, closing open branches" href="#">Toggle All</a> </div> <ul id="treeview" class="treeview-black">     <li>Item 1</li>     <li>         <span>Item 2</span>         <ul>             <li>                 <span>Item 2.1</span>                   <ul>                     <li>Item 2.1.1</li>                     <li>Item 2.1.2</li>                 </ul>             </li>             <li>Item 2.2</li>             <li class="closed">                   <span>Item 2.3 (closed at start)</span>                 <ul>                     <li>Item 2.3.1</li>                     <li>Item 2.3.2</li>                 </ul>             </li>         </ul>     </li> </ul> …and then associate the control to the treeview when defining the treeview settings. $("#treeview").treeview({     control: "#treecontrol",     persist: "cookie",     cookieId: "treeview-black" }); It really couldn’t be easier and it works great! But the plugin doesn’t offer a lot of flexibility when it comes to layout.  For example, the plugin assumes your treecontrol will include links.  If you want buttons or images or whatever, you are out of luck.  The plugin also assumes a set number of links and the collapse all handler is associated with the first link inside of the treecontrol, a:eq(0), the expand all handler is associated with the second link and so on.  So you really can’t incorporate the toggle all link by itself unless you manually hide the other options. Which brings me to the point of this post – making the collapse/expand/toggle layout more flexible without modifying the plugin’s source code. We will continue to use the treecontrol actions but we’re not going to use them directly. In fact, our custom collapse, expand and toggle links will trigger the actions for us.  So, hide the treecontrol links and associate the treecontrol click events with the click events of other controls.  Finally, render the treeview with the same setting definitions as usual. $(document).ready(function() {     // The plugin shows the treecontrol after the     // collapse, expand and toggle events are hooked up     // Just hide the links.     $('#treecontrol a').hide();       // On click of your custom links, button, etc     // Trigger the appropriate treecontrol click     $('#expandAll').click(function() {                 $('#treecontrol a:eq(1)').click();         });          $('#collapseAll').click(function() {         $('#treecontrol a:eq(0)').click();             });       // Render the treeview per usual.         $("#treeview").treeview({         control: "#treecontrol",         persist: "cookie",         cookieId: "treeview-black"     }); }); Since I’m not using the treecontrol directly, I move it to the bottom of the page but it doesn’t really matter where the treecontrol goes. <div>     <a id="collapseAll" href="#">Collapse All Outside of TreeControl</a> </div>   <ul id="treeview" class="treeview-black">     <li>Item 1</li>     <li>         <span>Item 2</span>         <ul>             <li>                 <span>Item 2.1</span>                 <ul>                     <li>Item 2.1.1</li>                     <li>Item 2.1.2</li>                 </ul>             </li>             <li>Item 2.2</li>             <li class="closed">                 <span>Item 2.3 (closed at start)</span>                 <ul>                     <li>Item 2.3.1</li>                     <li>Item 2.3.2</li>                 </ul>             </li>         </ul>     </li> </ul>   <div>     <input type="button" id="expandAll" value="Expand All Outside of TreeControl"/> </div>   <div id="treecontrol">     <a href="#"></a><a href="#"></a><a href="#"></a> </div> The above jQuery and Html snippets generate the following ugly output which shows the separated collapse/expand elements. If you want the toggle all option, I bet you can figure out how to put it in place.  I’ve made the source available below if you’re interested. Download jQuery Treeview Expand and Collapse Super Code

    Read the article

  • How to Use USER_DEFINED Activity in OWB Process Flow

    - by Jinggen He
    Process Flow is a very important component of Oracle Warehouse Builder. With Process Flow, we can create and control the ETL process by setting all kinds of activities in a well-constructed flow. In Oracle Warehouse Builder 11gR2, there are 28 kinds of activities, which fall into three categories: Control activities, OWB specific activities and Utility activities. For more information about Process Flow activities, please refer to OWB online doc. Most of those activities are pre-defined for some specific use. For example, the Mapping activity allows execution an OWB mapping in Process Flow and the FTP activity allows an interaction between the local host and a remote FTP server. Besides those activities for specific purposes, the User Defined activity enables you to incorporate into a Process Flow an activity that is not defined within Warehouse Builder. So the User Defined activity brings flexibility and extensibility to Process Flow. In this article, we will take an amazing tour of using the User Defined activity. Let's start. Enable execution of User Defined activity Let's start this section from creating a very simple Process Flow, which contains a Start activity, a User Defined activity and an End Success activity. Leave all parameters of activity USER_DEFINED unchanged except that we enter /tmp/test.sh into the Value column of the COMMAND parameter. Then let's create the shell script test.sh in /tmp directory. Here is the content of /tmp/test.sh (this article is demonstrating a scenario in Linux system, and /tmp/test.sh is a Bash shell script): echo Hello World! > /tmp/test.txt Note: don't forget to grant the execution privilege on /tmp/test.sh to OS Oracle user. For simplicity, we just use the following command. chmod +x /tmp/test.sh OK, it's so simple that we’ve almost done it. Now deploy the Process Flow and run it. For a newly installed OWB, we will come across an error saying "RPE-02248: For security reasons, activity operator Shell has been disabled by the DBA". See below. That's because, by default, the User Defined activity is DISABLED. Configuration about this can be found in <ORACLE_HOME>/owb/bin/admin/Runtime.properties: property.RuntimePlatform.0.NativeExecution.Shell.security_constraint=DISABLED The property can be set to three different values: NATIVE_JAVA, SCHEDULER and DISBALED. Where NATIVE_JAVA uses the Java 'Runtime.exec' interface, SCHEDULER uses a DBMS Scheduler external job submitted by the Control Center repository owner which is executed by the default operating system user configured by the DBA. DISABLED prevents execution via these operators. We enable the execution of User Defined activity by setting: property.RuntimePlatform.0.NativeExecution.Shell.security_constraint= NATIVE_JAVA Restart the Control Center service for the change of setting to take effect. cd <ORACLE_HOME>/owb/rtp/sql sqlplus OWBSYS/<password of OWBSYS> @stop_service.sql sqlplus OWBSYS/<password of OWBSYS> @start_service.sql And then run the Process Flow again. We will see that the Process Flow completes successfully. The execution of /tmp/test.sh successfully generated a file /tmp/test.txt, containing the line Hello World!. Pass parameters to User Defined Activity The Process Flow created in the above section has a drawback: the User Defined activity doesn't accept any information from OWB nor does it give any meaningful results back to OWB. That's to say, it lacks interaction. Maybe, sometimes such a Process Flow can fulfill the business requirement. But for most of the time, we need to get the User Defined activity executed according to some information prior to that step. In this section, we will see how to pass parameters to the User Defined activity and pass them into the to-be-executed shell script. First, let's see how to pass parameters to the script. The User Defined activity has an input parameter named PARAMETER_LIST. This is a list of parameters that will be passed to the command. Parameters are separated from one another by a token. The token is taken as the first character on the PARAMETER_LIST string, and the string must also end in that token. Warehouse Builder recommends the '?' character, but any character can be used. For example, to pass 'abc,' 'def,' and 'ghi' you can use the following equivalent: ?abc?def?ghi? or !abc!def!ghi! or |abc|def|ghi| If the token character or '\' needs to be included as part of the parameter, then it must be preceded with '\'. For example '\\'. If '\' is the token character, then '/' becomes the escape character. Let's configure the PARAMETER_LIST parameter as below: And modify the shell script /tmp/test.sh as below: echo $1 is saying hello to $2! > /tmp/test.txt Re-deploy the Process Flow and run it. We will see that the generated /tmp/test.txt contains the following line: Bob is saying hello to Alice! In the example above, the parameters passed into the shell script are static. This case is not so useful because: instead of passing parameters, we can directly write the value of the parameters in the shell script. To make the case more meaningful, we can pass two dynamic parameters, that are obtained from the previous activity, to the shell script. Prepare the Process Flow as below: The Mapping activity MAPPING_1 has two output parameters: FROM_USER, TO_USER. The User Defined activity has two input parameters: FROM_USER, TO_USER. All the four parameters are of String type. Additionally, the Process Flow has two string variables: VARIABLE_FOR_FROM_USER, VARIABLE_FOR_TO_USER. Through VARIABLE_FOR_FROM_USER, the input parameter FROM_USER of USER_DEFINED gets value from output parameter FROM_USER of MAPPING_1. We achieve this by binding both parameters to VARIABLE_FOR_FROM_USER. See the two figures below. In the same way, through VARIABLE_FOR_TO_USER, the input parameter TO_USER of USER_DEFINED gets value from output parameter TO_USER of MAPPING_1. Also, we need to change the PARAMETER_LIST of the User Defined activity like below: Now, the shell script is getting input from the Mapping activity dynamically. Deploy the Process Flow and all of its necessary dependees then run the Process Flow. We see that the generated /tmp/test.txt contains the following line: USER B is saying hello to USER A! 'USER B' and 'USER A' are two outputs of the Mapping execution. Write the shell script within Oracle Warehouse Builder In the previous section, the shell script is located in the /tmp directory. But sometimes, when the shell script is small, or for the sake of maintaining consistency, you may want to keep the shell script inside Oracle Warehouse Builder. We can achieve this by configuring these three parameters of a User Defined activity properly: COMMAND: Set the path of interpreter, by which the shell script will be interpreted. PARAMETER_LIST: Set it blank. SCRIPT: Enter the shell script content. Note that in Linux the shell script content is passed into the interpreter as standard input at runtime. About how to actually pass parameters to the shell script, we can utilize variable substitutions. As in the following figure, ${FROM_USER} will be replaced by the value of the FROM_USER input parameter of the User Defined activity. So will the ${TO_USER} symbol. Besides the custom substitution variables, OWB also provide some system pre-defined substitution variables. You can refer to the online document for that. Deploy the Process Flow and run it. We see that the generated /tmp/test.txt contains the following line: USER B is saying hello to USER A! Leverage the return value of User Defined activity All of the previous sections are connecting the User Defined activity to END_SUCCESS with an unconditional transition. But what should we do if we want different subsequent activities for different shell script execution results? 1.  The simplest way is to add three simple-conditioned out-going transitions for the User Defined activity just like the figure below. In the figure, to simplify the scenario, we connect the User Defined activity to three End activities. Basically, if the shell script ends successfully, the whole Process Flow will end at END_SUCCESS, otherwise, the whole Process Flow will end at END_ERROR (in our case, ending at END_WARNING seldom happens). In the real world, we can add more complex and meaningful subsequent business logic. 2.  Or we can utilize complex conditions to work with different results of the User Defined activity. Previously, in our script, we only have this line: echo ${FROM_USER} is saying hello to ${TO_USER}! > /tmp/test.txt We can add more logic in it and return different values accordingly. echo ${FROM_USER} is saying hello to ${TO_USER}! > /tmp/test.txt if CONDITION_1 ; then ...... exit 0 fi if CONDITION_2 ; then ...... exit 2 fi if CONDITION_3 ; then ...... exit 3 fi After that we can leverage the result by checking RESULT_CODE in condition expression of those out-going transitions. Let's suppose that we have the Process Flow as the following graph (SUB_PROCESS_n stands for more different further processes): We can set complex condition for the transition from USER_DEFINED to SUB_PROCESS_1 like this: Other transitions can be set in the same way. Note that, in our shell script, we return 0, 2 and 3, but not 1. As in Linux system, if the shell script comes across a system error like IO error, the return value will be 1. We can explicitly handle such a return value. Summary Let's summarize what has been discussed in this article: How to create a Process Flow with a User Defined activity in it How to pass parameters from the prior activity to the User Defined activity and finally into the shell script How to write the shell script within Oracle Warehouse Builder How to do variable substitutions How to let the User Defined activity return different values and in what way can we leverage

    Read the article

  • GuestPost: Unit Testing Entity Framework (v1) Dependent Code using TypeMock Isolator

    - by Eric Nelson
    Time for another guest post (check out others in the series), this time bringing together the world of mocking with the world of Entity Framework. A big thanks to Moses for agreeing to do this. Unit Testing Entity Framework Dependent Code using TypeMock Isolator by Muhammad Mosa Introduction Unit testing data access code in my opinion is a challenging thing. Let us consider unit tests and integration tests. In integration tests you are allowed to have environmental dependencies such as a physical database connection to insert, update, delete or retrieve your data. However when performing unit tests it is often much more efficient and productive to remove environmental dependencies. Instead you will need to fake these dependencies. Faking a database (also known as mocking) can be relatively straight forward but the version of Entity Framework released with .Net 3.5 SP1 has a number of implementation specifics which actually makes faking the existence of a database quite difficult. Faking Entity Framework As mentioned earlier, to effectively unit test you will need to fake/simulate Entity Framework calls to the database. There are many free open source mocking frameworks that can help you achieve this but it will require additional effort to overcome & workaround a number of limitations in those frameworks. Examples of these limitations include: Not able to fake calls to non virtual methods Not able to fake sealed classes Not able to fake LINQ to Entities queries (replace database calls with in-memory collection calls) There is a mocking framework which is flexible enough to handle limitations such as those above. The commercially available TypeMock Isolator can do the job for you with less code and ultimately more readable unit tests. I’m going to demonstrate tackling one of those limitations using MoQ as my mocking framework. Then I will tackle the same issue using TypeMock Isolator. Mocking Entity Framework with MoQ One basic need when faking Entity Framework is to fake the ObjectContext. This cannot be done by passing any connection string. You have to pass a correct Entity Framework connection string that specifies CSDL, SSDL and MSL locations along with a provider connection string. Assuming we are going to do that, we’ll explore another limitation. The limitation we are going to face now is related to not being able to fake calls to non-virtual/overridable members with MoQ. I have the following repository method that adds an EntityObject (instance of a Blog entity) to Blogs entity set in an ObjectContext. public override void Add(Blog blog) { if(BlogContext.Blogs.Any(b=>b.Name == blog.Name)) { throw new InvalidOperationException("Blog with same name already exists!"); } BlogContext.AddToBlogs(blog); } The method does a very simple check that the name of the new Blog entity instance doesn’t exist. This is done through the simple LINQ query above. If the blog doesn’t already exist it simply adds it to the current context to be saved when SaveChanges of the ObjectContext instance (e.g. BlogContext) is called. However, if a blog with the same name exits, and exception (InvalideOperationException) will be thrown. Let us now create a unit test for the Add method using MoQ. [TestMethod] [ExpectedException(typeof(InvalidOperationException))] public void Add_Should_Throw_InvalidOperationException_When_Blog_With_Same_Name_Already_Exits() { //(1) We shouldn't depend on configuration when doing unit tests! But, //its a workaround to fake the ObjectContext string connectionString = ConfigurationManager .ConnectionStrings["MyBlogConnString"] .ConnectionString; //(2) Arrange: Fake ObjectContext var fakeContext = new Mock<MyBlogContext>(connectionString); //(3) Next Line will pass, as ObjectContext now can be faked with proper connection string var repo = new BlogRepository(fakeContext.Object); //(4) Create fake ObjectQuery<Blog>. Will be used to substitute MyBlogContext.Blogs property var fakeObjectQuery = new Mock<ObjectQuery<Blog>>("[Blogs]", fakeContext.Object); //(5) Arrange: Set Expectations //Next line will throw an exception by MoQ: //System.ArgumentException: Invalid setup on a non-overridable member fakeContext.SetupGet(c=>c.Blogs).Returns(fakeObjectQuery.Object); fakeObjectQuery.Setup(q => q.Any(b => b.Name == "NewBlog")).Returns(true); //Act repo.Add(new Blog { Name = "NewBlog" }); } This test method is checking to see if the correct exception ([ExpectedException(typeof(InvalidOperationException))]) is thrown when a developer attempts to Add a blog with a name that’s already exists. On (1) a connection string is initialized from configuration file. To retrieve the full connection string. On (2) a fake ObjectContext is being created. The ObjectContext here is MyBlogContext and its being created using this var fakeContext = new Mock<MyBlogContext>(connectionString); This way a fake context is being created using MoQ. On (3) a BlogRepository instance is created. BlogRepository has dependency on generate Entity Framework ObjectContext, MyObjectContext. And so the fake context is passed to the constructor. var repo = new BlogRepository(fakeContext.Object); On (4) a fake instance of ObjectQuery<Blog> is being created to use as a substitute to MyObjectContext.Blogs property as we will see in (5). On (5) setup an expectation for calling Blogs property of MyBlogContext and substitute the return result with the fake ObjectQuery<Blog> instance created on (4). When you run this test it will fail with MoQ throwing an exception because of this line: fakeContext.SetupGet(c=>c.Blogs).Returns(fakeObjectQuery.Object); This happens because the generate property MyBlogContext.Blogs is not virtual/overridable. And assuming it is virtual or you managed to make it virtual it will fail at the following line throwing the same exception: fakeObjectQuery.Setup(q => q.Any(b => b.Name == "NewBlog")).Returns(true); This time the test will fail because the Any extension method is not virtual/overridable. You won’t be able to replace ObjectQuery<Blog> with fake in memory collection to test your LINQ to Entities queries. Now lets see how replacing MoQ with TypeMock Isolator can help. Mocking Entity Framework with TypeMock Isolator The following is the same test method we had above for MoQ but this time implemented using TypeMock Isolator: [TestMethod] [ExpectedException(typeof(InvalidOperationException))] public void Add_New_Blog_That_Already_Exists_Should_Throw_InvalidOperationException() { //(1) Create fake in memory collection of blogs var fakeInMemoryBlogs = new List<Blog> {new Blog {Name = "FakeBlog"}}; //(2) create fake context var fakeContext = Isolate.Fake.Instance<MyBlogContext>(); //(3) Setup expected call to MyBlogContext.Blogs property through the fake context Isolate.WhenCalled(() => fakeContext.Blogs) .WillReturnCollectionValuesOf(fakeInMemoryBlogs.AsQueryable()); //(4) Create new blog with a name that already exits in the fake in memory collection in (1) var blog = new Blog {Name = "FakeBlog"}; //(5) Instantiate instance of BlogRepository (Class under test) var repo = new BlogRepository(fakeContext); //(6) Acting by adding the newly created blog () repo.Add(blog); } When running the above test method it will pass as the Add method of BlogRepository is going to throw an InvalidOperationException which is the expected behaviour. Nothing prevents us from faking out the database interaction! Even faking ObjectContext  at (2) didn’t require a connection string. On (3) Isolator sets up a faking result for MyBlogContext.Blogs when its being called through the fake instance fakeContext created on (2). The faking result is just an in-memory collection declared an initialized on (1). Finally at (6) action we call the Add method of BlogRepository passing a new Blog instance that has a name that’s already exists in the fake in-memory collection which we set up at (1). As expected the test will pass because it will throw the expected exception defined on top of the test method - InvalidOperationException. TypeMock Isolator succeeded in faking Entity Framework with ease. Conclusion We explored how to write a simple unit test using TypeMock Isolator for code which is using Entity Framework. We also explored a few of the limitations of other mocking frameworks which TypeMock is successfully able to handle. There are workarounds that you can use to overcome limitations when using MoQ or Rhino Mock, however the workarounds will require you to write more code and your tests will likely be more complex. For a comparison between different mocking frameworks take a look at this document produced by TypeMock. You might also want to check out this open source project to compare mocking frameworks. I hope you enjoyed this post Muhammad Mosa http://mosesofegypt.net/ http://twitter.com/mosessaur Screencast of unit testing Entity Framework Related Links GuestPost: Introduction to Mocking GuesPost: Typemock Isolator – Much more than an Isolation framework

    Read the article

  • Oracle OpenWorld Preview: Oracle WebCenter Sessions You Won’t Want to Miss

    - by Christie Flanagan
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The beginning of Oracle OpenWorld is only a few short days away. This week on the WebCenter blog, we’ll focus in on the sessions you definitely don’t want to miss while you’re in San Francisco next week.  Monday, October 1 will be a day focused on strategy.  Here are the sessions you want to add to your calendar: CON8268 - Oracle WebCenter Strategy: Engaging Your Customers. Empowering Your Business Monday, Oct 1, 10:45 AM - 11:45 AM - Moscone West – 3001 Start things off with Oracle WebCenter’s Christian Finn, Senior Director of Evangelism and Roel Stalman, VP of Product Management to learn more about the Oracle WebCenter strategy, and to understand where Oracle is taking the platform to help companies engage, customers, empower employees, and enable partners. This session will also feature Richard Backx, Business IT Architect/Consultant, for the Dutch telecom, KPN. Richard has played a key role in the roll-out of WebCenter products for KPN’s multibrand portals with a specific focus on creating the best customer journey platform for all the company’s digital channels. Business success starts with ensuring that everyone is engaged with the right people and the right information and can access what they need through the channel of their choice—web, mobile, or social. Are you giving customers, employees, and partners the best-possible experience? Come learn how you can! Dig deeper into WebCenter’s strategy for its ECM, portal, web experience management and social collaboration in the following sessions: CON8270 - Oracle WebCenter Content Strategy and Vision Monday, Oct 1, 12:15 PM - 1:15 PM - Moscone West – 3001 Oracle WebCenter Content provides a strategic content infrastructure for managing documents, images, e-mails, and rich media files. With a single repository, organizations can address any content use case, such as accounts payable, HR onboarding, document management, compliance, records management, digital asset management, or Website management. In this session, learn about future plans for how Oracle WebCenter will address new use cases as well as new integrations with Oracle Fusion Middleware and Oracle Applications, leveraging your investments by making your users more productive and error-free. CON8269 - Oracle WebCenter Sites Strategy and Vision Monday, Oct 1, 1:45 PM - 2:45 PM - Moscone West - 3009 Oracle’s Web experience management solution, Oracle WebCenter Sites, enables organizations to use the online channel to drive customer acquisition and brand loyalty. It helps marketers and business users easily create and manage contextually relevant, social, interactive online experiences across multiple channels on a global scale. In this session, learn about future plans for how Oracle WebCenter Sites will provide you with the tools, capabilities, and integrations you need in order to continue to address your customers’ evolving requirements for engaging online experiences and keep moving your business forward. CON8271 - Oracle WebCenter Portal Strategy and Vision Monday, Oct 1, 3:15 PM - 4:15 PM - Moscone West - 3001 To innovate and keep a competitive edge, organizations need to leverage the power of agile and responsive Web applications. Oracle WebCenter Portal enables you to do just that, by delivering intuitive user experiences for enterprise applications to drive innovation with composite applications and mashups. Attend this session to learn firsthand from Oracle WebCenter Portal customers like the Los Angeles Department of Water and Power, extend the value of existing enterprise applications, business processes, and content; delivers a superior business user experience; and maximizes limited IT resources. CON8272 - Oracle Social Network Strategy and Vision Monday, Oct 1, 4:45 PM - 5:45 PM - Moscone West - 3001 One key way of increasing employee productivity is by bringing people, processes, and information together—providing new social capabilities to enable business users to quickly correspond and collaborate on business activities. Oracle WebCenter provides a user engagement platform with social and collaborative technologies to empower business users to focus on their key business processes, applications, and content in the context of their role and process. Attend this session to hear how the latest social capabilities in Oracle Social Network are enabling organizations to transform themselves into social businesses.Attention WebCenter Customers: Last Day to RSVP for WebCenter Customer Appreciation Reception Oracle WebCenter partners Fishbowl Solutions, Fujitsu, Keste, Mythics, Redstone Content Solutions, TEAM Informatics, and TekStream invite Oracle WebCenter customers to a private cocktail reception at one of San Francisco's finest hotels. Please join us and fellow Oracle WebCenter customers for hors d'oeuvres and cocktails at this exclusive reception. Don't miss this opportunity to meet and talk with executives from Oracle WebCenter product management and product marketing, and premier Oracle WebCenter partners. We look forward to seeing you! RSVP today.

    Read the article

  • CodePlex Daily Summary for Friday, June 04, 2010

    CodePlex Daily Summary for Friday, June 04, 2010New Projects23 Umbraco addons: 23 Umbraco addonsAdd-ons for EPiServer Relate+: In the Add-ons for EPiServer Relate+ you will find add-ons, extensions and modules that work together with EPiServer Relate+.Advanced Mail Merge (AMM) for Microsoft Office: Advanced Mail Merge for Microsoft Word 2007/2010, offers great extensable functionality: - Merge to document (PDF) - Merge to attachment - Use Out...Cenobith RLS Sample: Simple implementation of Row Level Security for Microsoft SQL ServerCodingWheels.DataTypes: DataTypes tries to make it easier for developers to have concrete typesafe objects for working with many common forms of data. Many times these dat...DigitArchive: Digit Archive makes it easy for the DIGIT magazine readers to find the correct software or movie bundled in the media along with the magazine. You'...dNet.DB: dNetDB is a .net framework that simplifies model and data access by providing a database independent object-based persistence, where objects are pe...Dynamic Application Framework: The Dynamic Application Framework provides a highly flexible environment for creating applications. Multiple UI and Execution Environments, along w...ECoG: ECoG toolkitFB Toolkit with Contracts: This is a research project where I have inserted code contracts into the Facebook Toolkit source code., version 3.1 beta. This delivers an efficien...GeneCMS: GeneCMS allows users to generate static HTML based websites by offering an ASP.NET editing front-end that can be run in the local machine. It is ta...HooIzDat: HooIzDat is game that asks, who the heck is that?! It's a two player game where your task is to guess your opponent's person before he or she guess...JingQiao.Interacting: JingQiao Interacting MessagingKanbanBoard: Visual task board for Kanban and Scrum.Learning CSharp: Just Learning CSharpMammoth: mammothMapWindow Mobile: MapWindow Mobile is mobile GIS Software which can run on windows mobile, developed in C# .NET Compact Framework. It provides basic GIS functionalit...Mindless Setback: Setback is a card game popular in New England. This project uses a combination of brute force and Monte Carlo methods to play Setback. This is an e...MSNCore(DirectUI) Element Viewer: MSNCore Element Viewer is an application designed to enumerate the elements with in applications built with MSNCore.dll and UXCore.dll. This appli...MSVN Team: bài tập thầy lườngNugget: Web Socket Server: A web socket server implemented in c#. The goal of the projects is to create an easy way to start using HTML5 web sockets in .NET web applications.oSoft ColorPicker Control for Visual Studio 2010: oSoft ColorPicker is an user control that can be used instead of the ColorDialog when you want to allow your users to select a color in a windows f...Prism Software Factory: The Prism Software Factory is a software factory for Visual Studio 2010 assisting developers in the process of building WPF & Silverlight applicati...Project Lion: Project lion is forum developed in Silverlight technology. Refix - .NET dependency management: Refix is an attempt to solve the problem of binary dependency management in large .NET solutions. It will achieve the goal using (amongst other thi...Rich Task List: Rich Task List is a tutorial project for DotNetNuke Module Development.SharePoint PowerRSS: Easy/Clean way to get SharePoint list data via more standard RSS feed. I found CleanRSS.aspx as part of SPRSS: Enhanced RSS Functionality for WSS ...SOAPI - StackOverflow API Generator: Generates, directly from the self documenting StackOverflow API specification, an end-to-end, fully documented API wrapper library with Visual Stu...SQL Script Application Utility: This C# project allows you to apply scripts to a database for table creation, data creation, etc. You can keep DDL in separate SQL scripts which c...Sql Server Reports Viewer: Sql Server Reports Viewer makes it easier to render Sql Server Reports without the need to setup a SSRS Server. This makes deployments a breeze. ...StorageHD: StorageHD system for large video filesUrzaGatherer: UrzaGatherer is a WPF 4.0 client application to handle Magic The Gathering cards collections. You can manage expansions, blocks and all informatio...webrel: This tool executes simple relational algebra expressions. It is useful for learning of Database course. Javascript and xhtml is used to develop thi...World Wide Grab: World Wide Grab allows retrieval and integration of various semi-structured data sorces, expecially Web applications. It turns every available res...New Releases3FD - Framework For Fast Development (C++): Alpha 3: This release was compiled in Visual Studio Release mode. It means you can use it in whatever compiler you want. However, the compatibility with ano...Advanced Mail Merge (AMM) for Microsoft Office: Advanced MailMerge 2007.zip: Release 1.1.0.0Army Bodger: Bodger 3 Archetype Test: Ok so it's later and I've largely finished it. Right now the Space Wolves have their Troops written and one HQ unit. The equipment panel largely wo...AwesomiumDotNet: AwesomiumDotNet 1.6 beta: Preview of AwesomiumDotNet 1.6.Bojinx: Bojinx Core V4.6: New features in this release: Greatly improved logging for INFO and DEBUG. Improved the getClassName function in ObjectUtils. Added the ability ...Cenobith RLS Sample: Sample App: Change connection strings in App.config and Web.config files.Christoc's DotNetNuke C# Module Development Template: 00.00.02: A minor update from the original release with a few fixes including Localization and some updated documentation.Community Forums NNTP bridge: Community Forums NNTP Bridge V25: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...DEWD: DEWD for Umbraco v1.0: Beta release of the package. Functional feature set and fairly stable. Since the alpha: Validation on input fields Custom view controls Ability...DotNetNuke Developers Help File: DNNHelpSystem 05.04.02: Release of the developer core API help documentation of DotNetNuke in MSDN style format, both as .CHM stand alone file as well as a html website ba...Drive Backup: Drive Backup V.0604: This release includes the following fixes/features: * Fixed incompatibility with some USB drives (those marked as “fixed” by Windows) * Ad...Event Scavenger: Version 3.3 (Refresh): Archiving bit added to database plus archiving stored procedure updated. Rest of items just refreshed. Database set to version 3.3Expression Encoder Batch Processor: Expression Batch v0.3: Now set the newly-converted file's Created DateTime to equal the source file's. This helps keep your videos sorterd chronologically in media librar...Folder Bookmarks: Folder Bookmarks 1.6.1: The latest version of Folder Bookmarks (1.6.1), with Mini-Menu bug fixes and 'Help' feature - all the instructions needed to use the software (If y...Genesis Smart Client Framework: Genesis v2.0 - Ruby User Experience Platform (UXP): This is the start of the rewrite of the entire framework. The rewrite will include support for XAML through WPF and Silverlight, WCF, Workflow Serv...Global: http requester tool: Added a brnad new console app for making http requests.GMap.NET - Great Maps for Windows Forms & Presentation: Hot Build: this is latest change-set build, unstable previewHERB.IQ: Alpha 0.1 Source code release 4: As of 6-23-10 @ 9:48ESTInfragistics Analytics Framework: Infragistics Analytics Framework 1.0: This project includes wrappers for the Infragistics controls that integrate with the recently launched Microsoft Silverlight Analytics Framework. T...Innovative Games: Cube Mapper: Cube Mapper is a small tool that takes in six textures and outputs a cube map that is a combination of the six textures. Cube Mapper supports .tga...jQuery Library for SharePoint Web Services: SPServices 0.5.6: This release is in an alpha state. Please only download it if you know what you are getting and are willing to test it. In any case, it's a bad ide...linq to jquery: jlinq v1.00 no doc: First public version of jlinq! no doc yet, soon too come!LinqSpecs: Version 1.0.1: Fabio Maulo has sent several patchs in order to make LinqSpecs to work with any linq provider other than in memory. Big KUDOS for him.mojoPortal: 2.3.4.4: see release notes on mojoportal.com Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on ...Nugget: Web Socket Server: Initial POC release: The initial proof of concept release. To try it out, open the Sample App.sln, set the ChatServer project as the start-up project, start debugging ...oSoft ColorPicker Control for Visual Studio 2010: oSoft ColorPicker Control for VS 2010 Beta 1: Beta 1Refix - .NET dependency management: Refix v0.1.0.48 ALPHA: First preview version of Refix command-line tool.SharePoint 2010 CSV Bulk Term Set Importer: Bulk Term Set Importer: Initial ReleaseSOAPI - StackOverflow API Generator: SOAPI Wrappers: SOAPI-JS First release as SOAPI-JS, SOAPI-CS coming shortly. Tests and example includedSQL Compact Toolbox: Beta 0.8.1: Initial test release - mind the bumps. Requires Visual Studio 2010.Thumb nail creator and image resizer: ThumbnailCreator1.2: this release fixes and issue that was occuring when the control was used inside paged dataTS3QueryLib.Net: TS3QueryLib.Net Version 0.23.17.0: Changelog Added Properties "IsSpacer" and "SpacerInfo" to ChannelListEntry. "IsSpacer" allows you to check whether the channel is a spacer channel ...UI Accessibility Checker: UI Accessibility Checker v.2.0: We are excited to announce the release of AccChecker 2.0! In addition to numerous bug fixes and usability improvements, these major features have...webrel: webrel 1.0: webrel 1.0WindStyle SlugHelper for Windows Live Writer: 1.2.0.0: 增加:可以配置是否忽略已经包含slug的日志,请在插件选项中配置; 增加:插件图标; 更新:支持最新Windows Live Writer,版本号14.0.8117.416。Work Recorder - Hold on own time!: WorkRecorder 1.1: +Only one instance can run #Change histogram to pie chartMost Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)PHPExcelpatterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesASP.NETMost Active ProjectsCommunity Forums NNTP bridgeRawrIonics Isapi Rewrite Filterpatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationN2 CMSBlogEngine.NETFarseer Physics EngineMain projectMirror Testing System

    Read the article

  • CodePlex Daily Summary for Wednesday, May 12, 2010

    CodePlex Daily Summary for Wednesday, May 12, 2010New ProjectsAMP (Adamo Media Player): AMP is a custom media player that specializes in large media collections! Change the way you manage your media!BoogiePartners: BoogiePartners provides a loose collection of utilities or extensions for Boogie and SpecSharp developers.C# Developer Utility Library: Collection of helpful code functions including zero-config rolling file logging, parameter validation, reflection & object construction, I18N count...Commerce Server 2009 Orders using Pipelines in a Console Application: Using Commerce Server 2009 outside of a Web Application this project show how to create dummy Orders using Pipelines in a NON WEB CONTEXT, an examp...CRM Queue Manager C#: CRM 4 Queue Manager written in C#. Based on the original VB.Net CRM Queue Manager with some changes, additions and feature changes. Converts emai...DbBuilder: This is a tool indended for creation of MS SQL database from scratch, incremental updates, management of redeployable objects, etc. using scripted ...DbNetData: A collection of cross vendor database interface classes for .NET written in C# providing a consistent and simplified way of accessing SQL Server,Or...Deploy Workflow Manager: Kick off a workflow associated with a SharePoint List on all list items at once. SharePoint Designer Workflows will also be included. This projec...DigiLini - digital on screen ruler: Handy desktop tool for everyone who does ever do something graphical on his computer. There is an sizable horizontal and vertial ruler. You can pos...Dynamic Grid Data Type for Umbraco: The Dynamic Grid Data Type for Umbraco is a custom ASCX/C# control that was created to store tabular data as an Umbraco "Data Type". There's an abi...FlashPlus: An extension for Google Chrome and a bookmarklet for Internet Explorer and Firefox, this project makes media content on browsers more usable. This...Flat Database: Simple project making it really quick and easy, to implement a simple flat-file database for an application.Flood Watch Spam Control: Flood watch is a C# based application meant to help prevent site black listings. This application monitors outbound smtp streams, if a stream excee...Gamebox: gameboxKill Bill: Kill Bill covers the areas of customers, suppliers, products, sales and administration divided into modules which together form the system for the ...KND Decoder: Der KND Decoder konvertiert die lästigen Zahlenwerte, in den Java Dateien vom Knuddels Applet, zu lesbaren Strings. Die neue dekodier Methode wurde...Moonbeam: D3D11 FrameworkSite Defender: Add-on for blogs or anywhere else there could be people spamming your website.sMODfix: -Stringzilla: A string formatting classes designed for .NET 4 to enable named string formatting and conditional string formatting options based upon bound data c...The CQRS Kitchen: The CQRS Kitchen is an example application build with Silverlight 4 that demonstrates how to implement a CQRS / Event Sourcing application with the...XELF Framework for XNA / .NET: XELF Framework for XNA / .NET  XNA Game Studioおよび.NET Framework用のライブラリ・フレームワークとしてXELFが開発したC#ソースコードを含むプロジェクトです。  現在は、「XELF.Framework」のWindows用XNA G...xxxxxxxxx: xxxxxxxNew ReleasesASP.NET MVC 2 - CommonLibrary.CMS: CommonLibrary CMS - Alpha: CommonLibrary CMSA simple yet powerful CMS system in ASP.NET MVC 2 using C# 3.5. ActiveRecord based support for Blogs, Widgets, Pages, Parts, Ev...ASP.NET MVC Extensions: v1.0 RTM: v1.0 RTMAWS SimpleDB Browser: Release 2: Miscellaneous fixes from the Alpha release. Built to work with the released version of the .Net Framework 4.0.BIDS Helper: 1.4.3.0: This release addresses the following issues: For some people the BIDS Helper extensions to the Project Properties page for the SSIS Deploy plugin w...Bojinx: Bojinx Core V4.5.13: Fixes / Enhancements: Sequencer now accepts Commands directly without using events. Command queue now accepts both events and commands EventBu...CF-Soft: TestCases_DROP1: TestCases_DROP1CodePlex Runtime Intelligence Integration: PreEmptive.Attributes distributable: Contains a signed redistributable version of the PreEmptive.Attributes.dll library that non .NET 4 applications can use support in-code instrumenta...Convection Game Engine (Basic Edition): Convection Basic (44772): Compiled version of Convection Basic change set 44772.CRM Queue Manager C#: Initial release: Initial release of the CRM Queue Manager in C#. Release includes both the installer as well as the latest source code in zippped format. Running...DbNetData: DbNetData.1.0: Initial releaseDigiLini - digital on screen ruler: DigiLini 1.0: First stable version.Facturator - Create invoices easy and fast: Facturator.zip: current stable versionFlat Database: Initial Release: This is the working initial release of FlatDBKharaPOS: MSDN Magazine Sample: This is the release that supports the MSDN magazine article "Enterprise Patterns with WCF RIA Services. Some of the project was affected by the upg...Let's Up: 1.1 (Build 100511): - Add short and long break feature.Mesopotamia Experiment: Mesopotamia 1.2.88: Primarly bug fixes... Bug Fixes - fixed bug in synapse mutating whereby new ones were of one side only eg, source or target - fixed bug in screen ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.123: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.123: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version makes...Over Store: OverStore 1.18.0.0: Version number is increased. New callback events added: Persisting and Persisted, which are raised on actually writing object data into the stora...Reusable Library: V1.0.7: A collection of reusable abstractions for enterprise application developerReusable Library Demo: V1.0.5: A demonstration of reusable abstractions for enterprise application developerRuntime Intelligence Endpoint Starter Kit: Runtime Intelligence Endpoint Starter Kit 20100511: Added crossdomain policy files so Silverlight applications can send usage data from anywhere.Scorm2CC: SCORM2CC Release 0.12.0.58711 net-2.0 Alpha: SCORM2CC Release 0.12.0.58711 net-2.0 AlphaShake - C# Make: Shake v0.1.14: Updated API to match with the current documentation.SharePoint LogViewer: SharePoint Log Viewer 2.6: This is a maintenance release. It has bug several fixes.Site Directory for SharePoint 2010 (from Microsoft Consulting Services, UK): v1.4: As 1.3 with the following changes Addition of a 'Site Data' webpart Site Directory can now be a site collection root or sub-site Scan job now ...sMODfix: sMODfix v1.0: Basic Versionsmtp4dev: smtp4dev 2.0: Smtp4dev 2.0 is powered by a completely re-written server component and now offers SSL/TLS and AUTH support.SocialScapes: SocialScapes Sidebar 1.0: The SocialScapes Sidebar is the first release of the new SocialScapes suite. There will be more modules to come along with a complete data aggrega...SSIS Multiple Hash: Multiple Hash V1.2: This is version 1.2 of the Multiple Hash SSIS Component. It supports SQL 2005 and SQL 2008, although you have to download the correct install pack...Surfium: Beta build: Somehow testedTerminals: Terminals 1.9a - RDP6 Support: The major change in this release is that Terminals has been upgraded to require RDP Client 6 to be installed for creating RDP connections. Backward...TFS Compare: Release 3.0: This release provides a new feature - the ability to navigate back and forth between document differences. Also, this release provides support for...VCC: Latest build, v2.1.30511.0: Automatic drop of latest buildyoutubeFisher: youtubeFisher v2.0: What's new new method of youtube parameters capturing HD 720p video support full-HD 1080p video support add Cancel option to stop file downl...Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryMirror Testing SystemRawrThe Information Literacy Education Learning Environment (ILE)Caliburn: An Application Framework for WPF and SilverlightwhiteBlogEngine.NETPHPExceljQuery Library for SharePoint Web ServicesTweetSharp

    Read the article

  • Ajax Control Toolkit November 2011 Release

    - by Stephen Walther
    I’m happy to announce the November 2011 Release of the Ajax Control Toolkit. This release introduces a new Balloon Popup control and several enhancements to the existing Tabs control including support for on-demand loading of tab content, support for vertical tabs, and support for keyboard tab navigation. We also fixed the top-voted bugs associated with the Tabs control reported at CodePlex.com. You can download the new release by visiting the CodePlex website: http://AjaxControlToolkit.CodePlex.com Alternatively, the fast and easy way to get the latest release of the Ajax Control Toolkit is to use NuGet. Open your Library Package Manager console in Visual Studio 2010 and type: After you install the Ajax Control Toolkit through NuGet, please do a Rebuild of your project (the menu option Build, Rebuild). After you do a Rebuild, the ajaxToolkit prefix will appear in Intellisense: Using the Balloon Popup Control Why a new Balloon Popup control? The Balloon Popup control is the second most requested new feature for the Ajax Control Toolkit according to CodePlex votes: The Balloon Popup displays a message in a balloon when you shift focus to a control, click a control, or hover over a control. You can use the Balloon Popup, for example, to display instructions for TextBoxes which appear in a form: Here’s the code used to create the Balloon Popup: <ajaxToolkit:ToolkitScriptManager ID="tsm1" runat="server" /> <asp:TextBox ID="txtFirstName" Runat="server" /> <asp:Panel ID="pnlFirstNameHelp" runat="server"> Please enter your first name </asp:Panel> <ajaxToolkit:BalloonPopupExtender TargetControlID="txtFirstName" BalloonPopupControlID="pnlFirstNameHelp" BalloonSize="Small" UseShadow="true" runat="server" /> You also can use the Balloon Popup to explain hard to understand words in a text document: Here’s how you display the Balloon Popup when you hover over the link: The point of the conversation was <asp:HyperLink ID="lnkObfuscate" Text="obfuscated" CssClass="hardWord" runat="server" /> by his incessant coughing. <ajaxToolkit:ToolkitScriptManager ID="tsm1" runat="server" /> <asp:Panel id="pnlObfuscate" Runat="server"> To bewilder or render something obscure </asp:Panel> <ajaxToolkit:BalloonPopupExtender TargetControlID="lnkObfuscate" BalloonPopupControlID="pnlObfuscate" BalloonStyle="Cloud" UseShadow="true" DisplayOnMouseOver="true" Runat="server" />   There are four important properties which you need to know about when using the Balloon Popup control: BalloonSize – The three balloon sizes are Small, Medium, and Large. BalloonStyle -- The two built-in styles are Rectangle and Cloud. UseShadow – When true, a drop shadow appears behind the popup. Position – Can have the values Auto, BottomLeft, BottomRight, TopLeft, TopRight. When set to Auto, which is the default, the Balloon Popup will appear where it has the most screen real estate. The following screenshots illustrates how these settings affect the appearance of the Balloon Popup: Customizing the Balloon Popup You can customize the appearance of the Balloon Popup by creating your own Cascading Style Sheet and Sprite. The Ajax Control Toolkit sample site includes a sample of a custom Oval Balloon Popup style: This custom style was created by using a custom Cascading Style Sheet and image. You point the Balloon Popup at a custom Cascading Style Sheet and Cascading Style Sheet class by using the CustomCssUrl and CustomClassName properties like this: <asp:TextBox ID="txtCustom" autocomplete="off" runat="server" /> <br /> <asp:Panel ID="Panel3" runat="server"> This is a custom BalloonPopupExtender style created with a custom Cascading Style Sheet. </asp:Panel> <ajaxToolkit:BalloonPopupExtender ID="bpe1" TargetControlID="txtCustom" BalloonPopupControlID="Panel3" BalloonStyle="Custom" CustomCssUrl="CustomStyle/BalloonPopupOvalStyle.css" CustomClassName="oval" UseShadow="true" runat="server" />   Learn More about the Balloon Popup To learn more about the Balloon Popup control, visit the sample page for the Balloon Popup at the Ajax Control Toolkit sample site: http://www.asp.net/ajaxLibrary/AjaxControlToolkitSampleSite/BalloonPopup/BalloonPopupExtender.aspx Improvements to the Tabs Control In this release, we introduced several important new features for the existing Tabs control. We also fixed all of the top-voted bugs for the Tabs control. On-Demand Loading of Tab Content Here is the scenario. Imagine that you are using the Tabs control in a Web Forms page. The Tabs control displays two tabs: Customers and Products. When you click the Customers tab then you want to see a list of customers and when you click on the Products tab then you want to see a list of products. In this scenario, you don’t want the list of customers and products to be retrieved from the database when the page is initially opened. The user might never click on the Products tab and all of the work to load the list of products from the database would be wasted. In this scenario, you want the content of a tab panel to be loaded on demand. The products should only be loaded from the database and rendered to the browser when you click the Products tab and not before. The Tabs control in the November 2011 Release of the Ajax Control Toolkit includes a new property named OnDemand. When OnDemand is set to the value True, a tab panel won’t be loaded until you click its associated tab. Here is the code for the aspx page: <ajaxToolkit:ToolkitScriptManager ID="tsm1" runat="server" /> <ajaxToolkit:TabContainer ID="tabs" OnDemand="false" runat="server"> <ajaxToolkit:TabPanel HeaderText="Customers" runat="server"> <ContentTemplate> <h2>Customers</h2> <asp:GridView ID="grdCustomers" DataSourceID="srcCustomers" runat="server" /> <asp:SqlDataSource ID="srcCustomers" SelectCommand="SELECT * FROM Customers" ConnectionString="<%$ ConnectionStrings:StoreDB %>" runat="server" /> </ContentTemplate> </ajaxToolkit:TabPanel> <ajaxToolkit:TabPanel HeaderText="Products" runat="server"> <ContentTemplate> <h2>Products</h2> <asp:GridView ID="grdProducts" DataSourceID="srcProducts" runat="server" /> <asp:SqlDataSource ID="srcProducts" SelectCommand="SELECT * FROM Products" ConnectionString="<%$ ConnectionStrings:StoreDB %>" runat="server" /> </ContentTemplate> </ajaxToolkit:TabPanel> </ajaxToolkit:TabContainer> Notice that the TabContainer includes an OnDemand=”True” property. The Tabs control contains two Tab Panels. The first tab panel uses a DataGrid and SqlDataSource to display a list of customers and the second tab panel uses a DataGrid and SqlDataSource to display a list of products. And here is the code-behind for the page: using System; using System.Diagnostics; using System.Web.UI.WebControls; namespace ACTSamples { public partial class TabsOnDemand : System.Web.UI.Page { protected override void OnInit(EventArgs e) { srcProducts.Selecting += new SqlDataSourceSelectingEventHandler(srcProducts_Selecting); } void srcProducts_Selecting(object sender, SqlDataSourceSelectingEventArgs e) { Debugger.Break(); } } } The code-behind file includes an event handler for the Products SqlDataSource Selecting event. The handler breaks into the debugger by calling the Debugger.Break() method. That way, we can know when the Products SqlDataSource actually retrieves the list of products. When the OnDemand property has the value False then the Selecting event handler is called immediately when the page is first loaded. The contents of all of the tabs are loaded (and the contents of the unselected tabs are hidden) when the page is first loaded. When the OnDemand property has the value True then the Selecting event handler is not called when the page is first loaded. The event handler is not called until you click on the Products tab. If you never click on the Products tab then the list of products is never retrieved from the database. If you want even more control over when the contents of a tab panel gets loaded then you can use the TabPanel OnDemandMode property. This property accepts the following three values: None – Never load the contents of the tab panel again after the page is first loaded. Once – Wait until the tab is selected to load the contents of the tab panel Always – Load the contents of the tab panel each and every time you select the tab. There is a live demonstration of the OnDemandMode property here in the sample page for the Tabs control: http://www.asp.net/ajaxLibrary/AjaxControlToolkitSampleSite/Tabs/Tabs.aspx Displaying Vertical Tabs With the November 2011 Release, the Tabs control now supports vertical tabs. To create vertical tabs, just set the TabContainer UserVerticalStripPlacement property to the value True like this: <ajaxToolkit:TabContainer ID="tabs" OnDemand="false" UseVerticalStripPlacement="true" runat="server"> <ajaxToolkit:TabPanel ID="TabPanel1" HeaderText="First Tab" runat="server"> <ContentTemplate> <p> Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </p> </ContentTemplate> </ajaxToolkit:TabPanel> <ajaxToolkit:TabPanel ID="TabPanel2" HeaderText="Second Tab" runat="server"> <ContentTemplate> <p> Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </p> </ContentTemplate> </ajaxToolkit:TabPanel> </ajaxToolkit:TabContainer> In addition, you can use the TabStripPlacement property to control whether the tab strip appears at the left or right or top or bottom of the tab panels: Tab Keyboard Navigation Another highly requested feature for the Tabs control is support for keyboard navigation. The Tabs control now supports the arrow keys and the Home and End keys. In order for the arrow keys to work, you must first move focus to the tab control on the page by either clicking on a tab with your mouse or repeatedly hitting the Tab key. You can try out the new keyboard navigation support by trying any of the demos included in the Tabs sample page: http://www.asp.net/ajaxLibrary/AjaxControlToolkitSampleSite/Tabs/Tabs.aspx Summary I hope that you take advantage of the new Balloon Popup control and the new features which we introduced for the Tabs control. We added a lot of new features to the Tabs control in this release including support for on-demand tabs, support for vertical tabs, and support for tab keyboard navigation. I want to thank the developers on the Superexpert team for all of the hard work which they put into this release.

    Read the article

< Previous Page | 602 603 604 605 606 607 608 609 610 611 612 613  | Next Page >