Search Results

Search found 1788 results on 72 pages for '47'.

Page 61/72 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Delaying NIS & NFS startup till after network interface is fully ready on Fedora 17

  - by obmarg

  I've recently set up a fedora 17 server for our network, and I've been having trouble getting the NIS service to work on startup. Here's some logs from the system: Aug 21 12:57:12 cairnwell ypbind-pre-setdomain[718]: Setting NIS domain: 'indigo-nis' (environment variable) Aug 21 12:57:13 cairnwell ypbind: Binding NIS service Aug 21 12:57:13 cairnwell rpc.statd[730]: Unable to prune capability 0 from bounding set: Operation not permitted Aug 21 12:57:13 cairnwell systemd[1]: nfs-lock.service: control process exited, code=exited status=1 Aug 21 12:57:13 cairnwell systemd[1]: Unit nfs-lock.service entered failed state. Aug 21 12:57:14 cairnwell setroubleshoot: SELinux is preventing /usr/sbin/rpc.statd from using the setpcap capability. For complete SELinux messages. run sealert -l 024bba8a-b0ef-43dc-b195-5c9a2d4c4d41 Aug 21 12:57:15 cairnwell kernel: [ 18.822282] bnx2 0000:02:00.0: em1: NIC Copper Link is Up, 1000 Mbps full duplex Aug 21 12:57:15 cairnwell kernel: [ 18.822925] ADDRCONF(NETDEV_CHANGE): em1: link becomes ready Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): carrier now ON (device state 20) Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> Auto-activating connection 'System em1'. Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> Activation (em1) starting connection 'System em1' Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): device state change: disconnected -> prepare (reason 'none') [30 40 0] ....... Aug 21 12:57:19 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:26 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:31 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:35 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:58:00 cairnwell ypbind: Binding took 47 seconds Aug 21 12:58:00 cairnwell ypbind: NIS server for domain indigo-nis is not responding. Aug 21 12:58:01 cairnwell ypbind: Killing ypbind with PID 733. Aug 21 12:58:01 cairnwell ypbind-post-waitbind[734]: /usr/lib/ypbind/ypbind-post-waitbind: line 51: kill: SIGTERM: invalid signal specification Aug 21 12:58:01 cairnwell systemd[1]: ypbind.service: control process exited, code=exited status=1 Aug 21 12:58:01 cairnwell systemd[1]: Unit ypbind.service entered failed state. By the looks of these logs the ypbind service is starting up at 12:57:12 but the network interface isn't coming up till 12:57:15. My guess is that this is causing ypbind to time out when trying to connect. As a knock-on effect the NIS failure is causing problems with NFS which is no longer able to map UIDs properly. This problem doesn't seem to be fixed by actually starting ypbind etc. so I've had to set all my NFS shares to noauto. I have tried manually adding NETWORKDELAY and NETWORKWAIT in /etc/sysconfig/network and also running systemctl enable NetworkManager-wait-online.service as I've seen suggested in some places, but neither of these have had any effect. It is relatively easy to fix manually by restarting ypbind & mounting NFS shares after the network has started up, but it's less than ideal to have to do this every time the server has been rebooted. Does anyone know of an easy (and preferably hack-free) way of delaying the ypbind startup till after the network interface is fully ready?

  Read the article

• Gmail and Live are making all messages from my server as spam.

  - by Ryan Kearney

  I'm getting very weird results here. When my server sends an email to my @hotmail or @gmail account, it's marked as spam. When I send email through my server from Outlook to @hotmail, it doesn't get marked as spam, but it still gets marked as spam in gmail. They seem to get through fine on Yahoo though. My servers hostname A record points to an IP address whose PTR record points back to the same domain name. The TXT record has a SPF record in it to allow email to be sent from that servers IP. I moved from a VPS to a Dedicated server when this started to happen. From what I can see, the email headers are identical. Here's one of my email headers that gmail marks as spam. Some fields were repalced. MYGMAILACCOUNT is the email address of the account the email was addressed to. USER is the name of the account on the system it was sent from HOSTNAME is the servers FQDN IPADDR is the IP Address of the Hostname MYDOMAIN is my domain name Delivered-To: MYGMAILACCOUNT Received: by 10.220.77.82 with SMTP id f18cs263483vck; Sat, 27 Feb 2010 23:58:02 -0800 (PST) Received: by 10.150.16.4 with SMTP id 4mr3886702ybp.110.1267343881628; Sat, 27 Feb 2010 23:58:01 -0800 (PST) Return-Path: <USER@HOSTNAME> Received: from HOSTNAME (HOSTNAME [IPADDR]) by mx.google.com with ESMTP id 17si4604419yxe.134.2010.02.27.23.58.01; Sat, 27 Feb 2010 23:58:01 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of USER@HOSTNAME designates IPADDR as permitted sender) client-ip=IPADDR; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of USER@HOSTNAME designates IPADDR as permitted sender) smtp.mail=USER@HOSTNAME Received: from USER by HOSTNAME with local (Exim 4.69) (envelope-from <USER@HOSTNAME>) id 1Nle2K-0000t8-Bd for MYGMAILACCOUNT; Sun, 28 Feb 2010 02:57:36 -0500 To: Ryan Kearney <MYGMAILACCOUNT> Subject: [Email Subject] MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: webmaster@MYDOMAIN Message-Id: <E1Nle2K-0000t8-Bd@HOSTNAME> Sender: <USER@HOSTNAME> Date: Sun, 28 Feb 2010 02:57:36 -0500 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - HOSTNAME X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [503 500] / [47 12] X-AntiAbuse: Sender Address Domain - HOSTNAME Anyone have any ideas as to why all mail leaving my server gets marked as spam? EDIT: I already used http://www.mxtoolbox.com/SuperTool.aspx to check if my servers IP's are blacklisted and they are in fact not. That's what I thought at first, but it isn't the case. Update Mar 1, 2010 I received the following email from Microsoft Thank you for writing to Windows Live Hotmail Domain Support. My name is * and I will be assisting you today. We have identified that messages from your IP are being filtered based on the recommendations of the SmartScreen filter. This is the spam filtering technology developed and operated by Microsoft and is built around the technology of machine learning. It learns to recognize what is and isn't spam. In short, we filter incoming emails that look like spam. I am not able to go into any specific details about what these filters specifically entail, as this would render them useless. E-mails from IPs are filtered based upon a combination of IP reputation and the content of individual emails. The reputation of an IP is influenced by a number of factors. Among these factors, which you as a sender can control, are: The IP's Junk Mail Reporting complaint rate The frequency and volume in which email is sent The number of spam trap account hits The RCPT success rate So I'm guessing it has to do with the fact that I got an IP address with little or no history in sending email. I've confirmed that I'm not on any blacklists. I'm guessing it's one of those things that will work itself out in a month or so. I'll post when I hear more.

  Read the article

• Ubuntu 12.04 KVM running Ubuntu 12.04 with linux-image-virtual crash on boot

  - by D.Mill

  One of my VMs is stuck on "pause" in virsh. If I destroy and restart it, it will go to pause after a bit of time as "running". I can at best enter my username at login if I'm quick but it'll then shutdown. I don't know where to start with this so any help would be great!! I can access the VMs files via guestfish. the kern.log and syslog don't populate new lines. This is the last input I get from kern.log: Dec 13 11:21:08 soft201 kernel: imklog 5.8.6, log source = /proc/kmsg started. Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpuset Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpu Dec 13 11:21:08 soft201 kernel: [ 0.000000] Linux version 3.2.0-34-virtual (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #53-Ubuntu SMP Thu Nov 15 11:08:40 UTC 2012 (Ubuntu 3.2.0-34.53-virtual 3.2.33) Dec 13 11:21:08 soft201 kernel: [ 0.000000] Command line: root=UUID=61d48b48-a06a-48fb-842e-b38014086a93 ro quiet splash Dec 13 11:21:08 soft201 kernel: [ 0.000000] KERNEL supported cpus: Dec 13 11:21:08 soft201 kernel: [ 0.000000] Intel GenuineIntel Dec 13 11:21:08 soft201 kernel: [ 0.000000] AMD AuthenticAMD Dec 13 11:21:08 soft201 kernel: [ 0.000000] Centaur CentaurHauls Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-provided physical RAM map: Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffc000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000dfffc000 - 00000000e0000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000a20000000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] NX (Execute Disable) protection: active Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI 2.4 present. Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Dec 13 As you can see the last line gets cut off. I don't even know if this is that relevant. dmesg logs are empty. The qemu log for the VM returns this: 2012-12-13 12:29:47.584+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-1.0 -enable-kvm -m 40960 -smp 14,sockets=14,cores=1,threads=1 -name numerink201 -uuid f4a889ed-a089-05d0-cc9d-9825ab1faeba -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/numerink201.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/client.soft.fr/tmpcZAD9U.qcow2,if=none,id=drive-ide0-0-0,format=qcow2 -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -fsdev local,security_model=none,id=fsdev-fs0,path=/home/shared_folders/soft201 -device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=hostshare,bus=pci.0,addr=0x5 -netdev tap,fd=18,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=02:00:00:1d:b9:e7,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:0 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/3 qemu: terminating on signal 15 from pid 28248 2012-12-13 12:30:14.455+0000: shutting down I've added more logging, libvirt.log gives me this: 2012-12-13 13:24:38.525+0000: 27694: info : libvirt version: 0.9.8 2012-12-13 13:24:38.525+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:38.525+0000: 27694: warning : qemuCapsInit:856 : Failed to get host power management capabilities 2012-12-13 13:24:39.865+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.865+0000: 27694: warning : lxcCapsInit:77 : Failed to get host power management capabilities 2012-12-13 13:24:39.866+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.866+0000: 27694: warning : umlCapsInit:87 : Failed to get host power management capabilities I don't really know where to go from here. I'll post whatever info you require

  Read the article

• SATA drive problems with two SIL RAID cards

  - by Jon Topper

  I've just put a second SiI 3114 SATARaid card in my home server so that I could add another pair of SATA drives and increase my storage space. Annoyingly, it doesn't seem to work: [ 32.816030] ata5: lost interrupt (Status 0x0) [ 32.816072] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 32.816091] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 32.816094] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 32.816101] ata5.00: status: { DRDY } [ 32.816117] ata5: hard resetting link [ 33.136082] ata5: SATA link down (SStatus 0 SControl 0) [ 36.060940] irq 18: nobody cared (try booting with the "irqpoll" option) [ 36.060949] Pid: 0, comm: swapper Not tainted 2.6.31-20-generic #58-Ubuntu [ 36.060954] Call Trace: [ 36.060977] [] ? printk+0x18/0x1c [ 36.060997] [] __report_bad_irq+0x27/0x90 [ 36.061005] [] note_interrupt+0x150/0x190 [ 36.061011] [] handle_fasteoi_irq+0xac/0xd0 [ 36.061023] [] handle_irq+0x18/0x30 [ 36.061029] [] do_IRQ+0x47/0xc0 [ 36.061042] [] ? irq_exit+0x50/0x70 [ 36.061058] [] ? smp_apic_timer_interrupt+0x57/0x90 [ 36.061065] [] common_interrupt+0x30/0x40 [ 36.061075] [] ? native_safe_halt+0x5/0x10 [ 36.061082] [] default_idle+0x46/0xd0 [ 36.061088] [] cpu_idle+0x8c/0xd0 [ 36.061103] [] rest_init+0x55/0x60 [ 36.061111] [] start_kernel+0x2e6/0x2ec [ 36.061117] [] ? unknown_bootoption+0x0/0x19e [ 36.061133] [] i386_start_kernel+0x7c/0x83 [ 36.061137] handlers: [ 36.061139] [] (sil_interrupt+0x0/0xb0) [ 36.061151] Disabling IRQ #18 [ 38.136014] ata5: hard resetting link [ 38.456022] ata5: SATA link down (SStatus 0 SControl 0) [ 43.456013] ata5: hard resetting link [ 43.776022] ata5: SATA link down (SStatus 0 SControl 0) [ 43.776035] ata5.00: disabled [ 43.776055] ata5.00: device reported invalid CHS sector 0 [ 43.776074] sd 4:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 43.776082] sd 4:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor] [ 43.776092] Descriptor sense data with sense descriptors (in hex): [ 43.776097] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 43.776112] 00 00 00 00 [ 43.776118] sd 4:0:0:0: [sde] Add. Sense: No additional sense information [ 43.776127] end_request: I/O error, dev sde, sector 0 [ 43.776136] Buffer I/O error on device sde, logical block 0 [ 43.776170] ata5: EH complete [ 43.776187] ata5.00: detaching (SCSI 4:0:0:0) root@core:~# cat /proc/interrupts CPU0 0: 47 IO-APIC-edge timer 1: 8 IO-APIC-edge i8042 6: 3 IO-APIC-edge floppy 7: 0 IO-APIC-edge parport0 8: 0 IO-APIC-edge rtc0 9: 0 IO-APIC-fasteoi acpi 14: 53069 IO-APIC-edge pata_sis 15: 53004 IO-APIC-edge pata_sis 17: 112265 IO-APIC-fasteoi sata_sil 18: 200002 IO-APIC-fasteoi sata_sil, SiS SI7012 19: 111140 IO-APIC-fasteoi eth0 20: 0 IO-APIC-fasteoi ohci_hcd:usb2 21: 0 IO-APIC-fasteoi ohci_hcd:usb3 23: 0 IO-APIC-fasteoi ehci_hcd:usb1 NMI: 0 Non-maskable interrupts LOC: 6650492 Local timer interrupts SPU: 0 Spurious interrupts CNT: 0 Performance counter interrupts PND: 0 Performance pending work RES: 0 Rescheduling interrupts CAL: 0 Function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts THR: 0 Threshold APIC interrupts MCE: 0 Machine check exceptions MCP: 160 Machine check polls ERR: 0 MIS: 0 root@core:~# lspci | grep Raid 00:09.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 00:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) root@core:~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 9.10 Release: 9.10 Codename: karmic root@core:~# uname -a Linux core.topper.me.uk 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux I've tried a combination of different kernel options (irqpoll, noapic, noacpi, pci=noapic) all to no avail. Does anyone have any bright ideas about how I can go about making this work? Swapping PCI cards around isn't an option as there are only two slots in this motherboard (an ASRock K7S41GX). The BIOS doesn't look to have too much in the way of configuration options regarding IRQ usage. Plan B is to ditch this server completely and buy a new QNAP for these drives to go in, but I was hoping to avoid doing this right now.

  Read the article

• Apache cyclic redirection problem

  - by slicedlime

  I have an extremely weird problem with one of my sites. I run a number of blogs off a single apache2 server with a shared wordpress install. Each site has a www.domain.com main domain, but a ServerAlias of domain.com. This works fine for all the blogs except one, which instead of redirecting to www.domain.com redirects to domain.com, causing a cyclic redirection. The configuration for each host looks like this: <VirtualHost *:80> ServerName www.domain.com ServerAlias domain.com DocumentRoot "/home/www/www.domain.com" <Directory "/home/www/www.domain.com"> Options MultiViews Indexes Includes FollowSymLinks ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> As this didn't work, I tried a mod_rewrite rule for it, which still didn't redirect correctly. The weird thing here is that if i rewrite it to redirect to any other domain it will redirect correctly, even to another subdomain. So a rewrite rule for domain.com that redirects to foo.domain.com works, but not to www.domain.com. In the same way, trying to redirec to www.domain.com/foo/ ends me up with a redirection to domain.com/foo/. Even weirder, I tried setting up domain.com as a completely separate virtual host, and ran this php test script as index.php on it: <?php header('Location: http://www.domain.com/' . $_SERVER["request_uri"]); ?> Hitting domain.com still redirects to domain.com! Checking out the headers sent to the server verifies that I get exactly the redirect URL I wanted, except with the "www." stripped. The same script works like a charm if I replace www. with foo or redirect to any other domain. This has now foiled me for a long time. I've diffed the vhosts configs for a working domain and the faulty one, and the only difference is the domain name itself. I've diffed the .htaccess files for both sites, and the only difference is a path related to the sharing of wordpress installation for the blogs: php_value include_path ".:/home/www/www.domain.com/local/:/home/www/www.domain.com/" I searched through everything in /etc (including apache conf) for the domain name of the faulty host and found nothing weird, searched through everything in /etc for one of the working ones to make sure it didn't differ, I even went so far to check on the DNS setup of two domains to make sure there wasn't anything strange going on. Here's the response for the faulty one: user@localhost dir $ wget -S domain.com --2010-03-20 21:47:24-- http://domain.com/ Resolving domain.com... x.x.x.x Connecting to domain.com|x.x.x.x|:80... connected. HTTP request sent, awaiting response... HTTP/1.1 301 Moved Permanently Via: 1.1 ISA Connection: Keep-Alive Proxy-Connection: Keep-Alive Content-Length: 0 Date: Sat, 20 Mar 2010 20:47:24 GMT Location: http://domain.com/ Content-Type: text/html; charset=UTF-8 Server: Apache X-Powered-By: PHP/5.2.10-pl0-gentoo X-Pingback: http://domain.com/xmlrpc.php Keep-Alive: timeout=15, max=100 Location: http://domain.com/ [following] And a working one: user@localhost dir $ wget -S domain.com --2010-03-20 21:51:33-- http://domain.com/ Resolving domain.com... x.x.x.x Connecting to domain.com|x.x.x.x|:80... connected. HTTP request sent, awaiting response... HTTP/1.1 301 Moved Permanently Via: 1.1 ISA Connection: Keep-Alive Proxy-Connection: Keep-Alive Content-Length: 0 Date: Sat, 20 Mar 2010 20:51:33 GMT Location: http://www.domain.com/ Content-Type: text/html; charset=UTF-8 Server: Apache X-Powered-By: PHP/5.2.10-pl0-gentoo X-Pingback: http://www.domain.com/xmlrpc.php Keep-Alive: timeout=15, max=100 Location: http://www.domain.com/ [following] I'm stumped. I've had this problem for a long time, and I feel like I've tried everything. I can't see why the different domains would act differently under the same installation with the same settings. Help :(

  Read the article

• PPTP connection fails with errors 800/806

  - by Mark S. Rasmussen

  I've got a client (Server 2008 R2) that won't connect to our production environment PPTP VPN server (Server 2003, running RRAS). The server is behind a firewall that has TCP1723 open as well as GRE. Other clients at our office are able to connect just fine. Our office is behind a Juniper SSG5-Serial firewall, but all outgoing traffic is allowed, and multiple other clients are able to connect to VPN servers without issues. I've also setup a completely different VPN server on another network outside of our office. The functioning clients connect just fine - the Server 2008 R2 machine doesn't. Thus it's definitely a problem with this machine in particular. I've rebooted it. I've disabled the firewall, no dice on either. I've run PPTPSRV and PPTPCLNT on the server/client and they're able to communicate perfectly - indicating there's no problem using neither TCP1723 nor GRE. The Server 2008 R2 machine is also running as a VPN server itself (incoming connection) and that's working perfectly. We have the issues no matter if there are active incoming connections or not. I'm not sure what my next debugging step would be; any suggestions? EDIT: The event log on the server has the following warning from RasMan: A connection between the VPN server and the VPN client xxx.xxx.xxx.xxx has been established, but the VPN connection cannot be completed. The most common cause for this is that a firewall or router between the VPN server and the VPN client is not configured to allow Generic Routing Encapsulation (GRE) packets (protocol 47). Verify that the firewalls and routers between your VPN server and the Internet allow GRE packets. Make sure the firewalls and routers on the user's network are also configured to allow GRE packets. If the problem persists, have the user contact the Internet service provider (ISP) to determine whether the ISP might be blocking GRE packets. Obviously this points to GRE being a potential problem. But seeing as I have other clients connectiong without problems, as well as PPTPSRV and PPTPCLNT being able to communicate, I'm suspecting this might be a red herring. EDIT: Here are the anonymized events logged by the client in chronological order: CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has started dialing a VPN connection using a per-user connection profile named ZZZ. The connection settings are: Dial-in User = XXX\YYY VpnStrategy = PPTP DataEncryption = Require PrerequisiteEntry = AutoLogon = No UseRasCredentials = Yes Authentication Type = CHAP/MS-CHAPv2 Ipv4DefaultGateway = No Ipv4AddressAssignment = By Server Ipv4DNSServerAssignment = By Server Ipv6DefaultGateway = Yes Ipv6AddressAssignment = By Server Ipv6DNSServerAssignment = By Server IpDnsFlags = Register primary domain suffix IpNBTEnabled = Yes UseFlags = Private Connection ConnectOnWinlogon = No. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY is trying to establish a link to the Remote Access Server for the connection named ZZZ using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has successfully established a link to the Remote Access Server using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The link to the Remote Access Server has been established by user XXX\YYY. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY dialed a connection named ZZZ which has failed. The error code returned on failure is 806. Running Wireshark on the client shows it trying and retrying to send a "71 Configuration Request" While the server shows the incoming client requests, but apparently without replying: Given that this is GRE traffic, I think rules out the GRE traffic being blocked. Question is, why doesn't the server reply? This is the Configuration Request the server receives from the non functioning client (meaning no response is sent to the client request): And this is the Configuration Request the server receives from the working client: To me they seem identical, except for differing keys and magic numbers, and the fact that one client receives a response while the other doesn't.

  Read the article

• WHM Checking server status so frequently?

  - by Webnet

  Why do I have so many whm-server-status elements on this Apache status screen for WHM. 0-1 28256 0/4/808 _ 0.20 5 26 0.0 0.19 6.62 72.95.166.85 diablo-source.gamer-source.com GET /lib/ajax/keep-alive.php?_dc=1276829050557 HTTP/1.1 1-1 28259 0/5/934 _ 0.00 4 188 0.0 0.06 6.67 127.0.0.1 server.gospire.com GET /whm-server-status/ HTTP/1.0 2-1 - 0/0/940 . 0.18 55 0 0.0 0.00 6.61 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 3-1 - 0/0/914 . 0.49 28 0 0.0 0.00 8.46 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 4-1 - 0/0/837 . 0.00 62 0 0.0 0.00 7.49 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 5-1 27580 0/15/849 _ 6.36 7 188 0.0 0.69 6.89 127.0.0.1 server.gospire.com GET /whm-server-status/ HTTP/1.0 6-1 - 0/0/829 . 0.00 58 0 0.0 0.00 4.20 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 7-1 - 0/0/878 . 0.03 47 0 0.0 0.00 4.62 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 8-1 26737 0/19/759 W 7.55 93 0 0.0 0.93 8.24 76.76.103.50 gamer-source.com GET /development-blog/?p=101&cpage=108 HTTP/1.0 9-1 - 0/0/847 . 0.36 61 0 0.0 0.00 7.90 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 10-1 28233 0/8/705 _ 0.17 6 201 0.0 0.06 6.18 127.0.0.1 server.gospire.com GET /whm-server-status/ HTTP/1.0 11-1 - 0/0/754 . 0.00 48 0 0.0 0.00 6.50 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 12-1 28235 0/6/670 W 0.11 25 0 0.0 0.04 3.15 76.76.103.50 gamer-source.com GET /development-blog/?p=104&cpage=1 HTTP/1.0 13-1 - 0/0/611 . 0.00 60 0 0.0 0.00 4.76 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 14-1 - 0/0/713 . 0.00 59 0 0.0 0.00 5.70 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 15-1 - 0/0/696 . 0.00 57 0 0.0 0.00 4.85 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 16-1 - 0/0/695 . 0.50 73 0 0.0 0.00 4.43 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 17-1 - 0/0/547 . 0.17 56 0 0.0 0.00 4.89 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 18-1 - 0/0/472 . 0.00 80 0 0.0 0.00 2.05 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 19-1 27588 0/7/423 _ 6.59 1 184 0.0 0.69 2.79 127.0.0.1 server.gospire.com GET /whm-server-status/ HTTP/1.0 20-1 27589 0/6/420 _ 6.54 3 184 0.0 0.71 3.62 127.0.0.1 server.gospire.com GET /whm-server-status/ HTTP/1.0 21-1 28242 0/10/374 _ 0.44 6 819 0.0 0.05 1.81 67.195.114.23 gamer-source.com GET /development-blog/?p=120 HTTP/1.0 22-1 - 0/0/359 . 0.00 79 0 0.0 0.00 3.45 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 23-1 - 0/0/326 . 0.16 163 0 0.0 0.00 2.64 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 24-1 - 0/0/430 . 0.40 74 0 0.0 0.00 3.30 127.0.0.1 server.gospire.com OPTIONS * HTTP/1.0 25-1 27624 0/23/276 W 0.78 0 0 0.0 0.16 1.08 127.0.0.1 server.gospire.com GET /whm-server-status/ HTTP/1.0

  Read the article

• cron.daily not running at the time it should?

  - by Mariano Martinez Peck

  My /etc/cron.daily scripts seem to be executing far later from what I understand they should. I am in Ubuntu and anacron is installed. If I do a sudo cat /var/log/syslog | grep cron I get something like: Aug 23 01:17:01 mymachine CRON[25171]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 02:17:01 mymachine CRON[25588]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 03:17:01 mymachine CRON[26026]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 03:25:01 mymachine CRON[30320]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )) Aug 23 04:17:01 mymachine CRON[26363]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 05:17:01 mymachine CRON[26770]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 06:17:01 mymachine CRON[27168]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 07:17:01 mymachine CRON[27547]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 23 07:30:01 mymachine CRON[2249]: (root) CMD (start -q anacron || :) Aug 23 07:30:02 mymachine anacron[2252]: Anacron 2.3 started on 2014-08-23 Aug 23 07:30:02 mymachine anacron[2252]: Will run job `cron.daily' in 5 min. Aug 23 07:30:02 mymachine anacron[2252]: Jobs will be executed sequentially Aug 23 07:35:02 mymachine anacron[2252]: Job `cron.daily' started As you can see, at 3:25 it tried to do something. But the cron.daily execution started really at 7:35. My /etc/crontab is: # /etc/crontab: system-wide crontab # Unlike any other crontab you don't have to run the `crontab' # command to install the new version when you edit this file # and files in /etc/cron.d. These files also have username fields, # that none of the other crontabs do. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 3 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) # From what I understand, daily scripts are indeed for 3:25. My /etc/anacrontab is: # /etc/anacrontab: configuration file for anacron # See anacron(8) and anacrontab(5) for details. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin HOME=/root LOGNAME=root # These replace cron's entries 1 5 cron.daily run-parts --report /etc/cron.daily 7 10 cron.weekly run-parts --report /etc/cron.weekly @monthly 15 cron.monthly run-parts --report /etc/cron.monthly So...does someone know why my cron started to do something at 3:25 but then really start the jobs at 7:35? Also..as you can see in the log, hourly jobs are being executed at correct time: hour and 17 minutes, which is exactly what I have in /etc/crontab Finally, from the logs, it seems my daily jobs are being actually run by anacron rather than cron? So cron finds nothing to run (at 3:25) and then anacron runs the jobs at 7:35? If true, how can I fix this? Thanks in advance,

  Read the article

• rdiff-backup is taking longer and longer every time it runs

  - by Jakobud

  I've been running rdiff-backup for the past week or so, every night at 4am. It started out not taking that long, but its taking longer and longer and longer every time its runs every night. In some cases there are quite a few new and changed files and in other cases, not so much. It started out taking < 10 minutes, and after a week its taking over 4.5 hrs to run. Take a look at my session stats below: StartTime 1268046002.00 (Mon Mar 8 04:00:02 2010) EndTime 1268046373.50 (Mon Mar 8 04:06:13 2010) ElapsedTime 371.50 (6 minutes 11.50 seconds) SourceFiles 213928 SourceFileSize 277271282225 (258 GB) MirrorFiles 213914 MirrorFileSize 276693097638 (258 GB) NewFiles 16 NewFileSize 578209911 (551 MB) DeletedFiles 2 DeletedFileSize 2598 (2.54 KB) ChangedFiles 27 ChangedSourceSize 5195150 (4.95 MB) ChangedMirrorSize 5217876 (4.98 MB) IncrementFiles 0 IncrementFileSize 0 (0 bytes) TotalDestinationSizeChange 578184587 (551 MB) Errors 0 StartTime 1268132402.00 (Tue Mar 9 04:00:02 2010) EndTime 1268134341.29 (Tue Mar 9 04:32:21 2010) ElapsedTime 1939.29 (32 minutes 19.29 seconds) SourceFiles 213963 SourceFileSize 307959842562 (287 GB) MirrorFiles 213928 MirrorFileSize 277271282225 (258 GB) NewFiles 37 NewFileSize 31265005547 (29.1 GB) DeletedFiles 2 DeletedFileSize 576511960 (550 MB) ChangedFiles 25 ChangedSourceSize 5243761 (5.00 MB) ChangedMirrorSize 5177011 (4.94 MB) IncrementFiles 65 IncrementFileSize 577266412 (551 MB) TotalDestinationSizeChange 31265826749 (29.1 GB) Errors 0 StartTime 1268218802.00 (Wed Mar 10 04:00:02 2010) EndTime 1268225230.15 (Wed Mar 10 05:47:10 2010) ElapsedTime 6428.15 (1 hour 47 minutes 8.15 seconds) SourceFiles 213971 SourceFileSize 307960643843 (287 GB) MirrorFiles 213963 MirrorFileSize 307959842562 (287 GB) NewFiles 9 NewFileSize 694087 (678 KB) DeletedFiles 1 DeletedFileSize 894 (894 bytes) ChangedFiles 38 ChangedSourceSize 30656167797 (28.6 GB) ChangedMirrorSize 30656059709 (28.6 GB) IncrementFiles 48 IncrementFileSize 289278151 (276 MB) TotalDestinationSizeChange 290079432 (277 MB) Errors 0 StartTime 1268305202.00 (Thu Mar 11 04:00:02 2010) EndTime 1268312788.15 (Thu Mar 11 06:06:28 2010) ElapsedTime 7586.15 (2 hours 6 minutes 26.15 seconds) SourceFiles 213971 SourceFileSize 307960643779 (287 GB) MirrorFiles 213971 MirrorFileSize 307960643843 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 15 ChangedSourceSize 30650824127 (28.5 GB) ChangedMirrorSize 30650824191 (28.5 GB) IncrementFiles 16 IncrementFileSize 689437042 (657 MB) TotalDestinationSizeChange 689436978 (657 MB) Errors 0 StartTime 1268391601.00 (Fri Mar 12 04:00:01 2010) EndTime 1268400145.85 (Fri Mar 12 06:22:25 2010) ElapsedTime 8544.85 (2 hours 22 minutes 24.85 seconds) SourceFiles 213974 SourceFileSize 307960784445 (287 GB) MirrorFiles 213971 MirrorFileSize 307960643779 (287 GB) NewFiles 5 NewFileSize 269587 (263 KB) DeletedFiles 2 DeletedFileSize 128921 (126 KB) ChangedFiles 16 ChangedSourceSize 30650815948 (28.5 GB) ChangedMirrorSize 30650815948 (28.5 GB) IncrementFiles 26 IncrementFileSize 818279963 (780 MB) TotalDestinationSizeChange 818420629 (781 MB) Errors 0 StartTime 1268478002.00 (Sat Mar 13 04:00:02 2010) EndTime 1268488740.33 (Sat Mar 13 06:59:00 2010) ElapsedTime 10738.33 (2 hours 58 minutes 58.33 seconds) SourceFiles 213974 SourceFileSize 307960784238 (287 GB) MirrorFiles 213974 MirrorFileSize 307960784445 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 16 ChangedSourceSize 30650823920 (28.5 GB) ChangedMirrorSize 30650824127 (28.5 GB) IncrementFiles 19 IncrementFileSize 1041846015 (994 MB) TotalDestinationSizeChange 1041845808 (994 MB) Errors 0 StartTime 1268560803.00 (Sun Mar 14 04:00:03 2010) EndTime 1268573194.82 (Sun Mar 14 07:26:34 2010) ElapsedTime 12391.82 (3 hours 26 minutes 31.82 seconds) SourceFiles 213974 SourceFileSize 307960784238 (287 GB) MirrorFiles 213974 MirrorFileSize 307960784238 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 14 ChangedSourceSize 30650815948 (28.5 GB) ChangedMirrorSize 30650815948 (28.5 GB) IncrementFiles 15 IncrementFileSize 1116911810 (1.04 GB) TotalDestinationSizeChange 1116911810 (1.04 GB) Errors 0 StartTime 1268647203.00 (Mon Mar 15 04:00:03 2010) EndTime 1268662364.88 (Mon Mar 15 08:12:44 2010) ElapsedTime 15161.88 (4 hours 12 minutes 41.88 seconds) SourceFiles 214010 SourceFileSize 307963430178 (287 GB) MirrorFiles 213974 MirrorFileSize 307960784238 (287 GB) NewFiles 37 NewFileSize 2684172 (2.56 MB) DeletedFiles 1 DeletedFileSize 5348 (5.22 KB) ChangedFiles 32 ChangedSourceSize 30656134913 (28.6 GB) ChangedMirrorSize 30656167797 (28.6 GB) IncrementFiles 71 IncrementFileSize 1316460362 (1.23 GB) TotalDestinationSizeChange 1319106302 (1.23 GB) Errors 0 StartTime 1268733603.00 (Tue Mar 16 04:00:03 2010) EndTime 1268750396.76 (Tue Mar 16 08:39:56 2010) ElapsedTime 16793.76 (4 hours 39 minutes 53.76 seconds) SourceFiles 214010 SourceFileSize 307963430156 (287 GB) MirrorFiles 214010 MirrorFileSize 307963430178 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 15 ChangedSourceSize 30650823898 (28.5 GB) ChangedMirrorSize 30650823920 (28.5 GB) IncrementFiles 16 IncrementFileSize 936032413 (893 MB) TotalDestinationSizeChange 936032391 (893 MB) Errors 0 StartTime 1268820002.00 (Wed Mar 17 04:00:02 2010) EndTime 1268834619.90 (Wed Mar 17 08:03:39 2010) ElapsedTime 14617.90 (4 hours 3 minutes 37.90 seconds) SourceFiles 214010 SourceFileSize 307963430156 (287 GB) MirrorFiles 214010 MirrorFileSize 307963430156 (287 GB) NewFiles 0 NewFileSize 0 (0 bytes) DeletedFiles 0 DeletedFileSize 0 (0 bytes) ChangedFiles 14 ChangedSourceSize 30650815948 (28.5 GB) ChangedMirrorSize 30650815948 (28.5 GB) IncrementFiles 15 IncrementFileSize 1289272860 (1.20 GB) TotalDestinationSizeChange 1289272860 (1.20 GB) Errors 0 Is this common behavior? It's only about 300gigs of data total. One important thing to note though, rdiff-backup is backup up stuff over to a USB2 external drive. Maybe thats why its so slow?

  Read the article

• No device file for partition on logical volume (Linux LVM)

  - by Brian

  I created a logical volume (scandata) containing a single ext3 partition. It is the only logical volume in its volume group (case4t). Said volume group is comprised by 3 physical volumes, which are three primary partitions on a single block device (/dev/sdb). When I created it, I could mount the partition via the block device /dev/mapper/case4t-scandatap1. Since last reboot the aforementioned block device file has disappeared. It may be of note -- I'm not sure -- that my superior (a college professor) had prompted this reboot by running sudo chmod -R [his name] /usr/bin, which obliterated all suid in its path, preventing the both of us from sudo-ing. That issue has been (temporarily) rectified via this operation. Now I'll cut the chatter and get started with the terminal dumps: $ sudo pvs; sudo vgs; sudo lvs Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Scanning for physical volume names PV VG Fmt Attr PSize PFree /dev/sdb1 case4t lvm2 a- 819.32G 0 /dev/sdb2 case4t lvm2 a- 866.40G 0 /dev/sdb3 case4t lvm2 a- 47.09G 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" VG #PV #LV #SN Attr VSize VFree case4t 3 1 0 wz--n- 1.69T 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all logical volumes LV VG Attr LSize Origin Snap% Move Log Copy% Convert scandata case4t -wi-a- 1.69T Wiping internal VG cache $ sudo vgchange -a y Logging initialised at Sat Jan 8 11:43:14 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" 1 logical volume(s) in volume group "case4t" already active 1 existing logical volume(s) in volume group "case4t" monitored Found volume group "case4t" Activated logical volumes in volume group "case4t" 1 logical volume(s) in volume group "case4t" now active Wiping internal VG cache $ ls /dev | grep case4t case4t $ ls /dev/mapper case4t-scandata control $ sudo fdisk -l /dev/case4t/scandata Disk /dev/case4t/scandata: 1860.5 GB, 1860584865792 bytes 255 heads, 63 sectors/track, 226203 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00049bf5 Device Boot Start End Blocks Id System /dev/case4t/scandata1 1 226203 1816975566 83 Linux $ sudo parted /dev/case4t/scandata print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/case4t-scandata: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 1861GB 1861GB primary ext3 $ sudo fdisk -l /dev/sdb Disk /dev/sdb: 1860.5 GB, 1860593254400 bytes 255 heads, 63 sectors/track, 226204 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000081 Device Boot Start End Blocks Id System /dev/sdb1 1 106955 859116006 83 Linux /dev/sdb2 113103 226204 908491815 83 Linux /dev/sdb3 106956 113102 49375777+ 83 Linux Partition table entries are not in disk order $ sudo parted /dev/sdb print Model: DELL PERC 6/i (scsi) Disk /dev/sdb: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 880GB 880GB primary reiserfs 3 880GB 930GB 50.6GB primary 2 930GB 1861GB 930GB primary I find it a bit strange that partition one above is said to be reiserfs, or if it matters -- it was previously reiserfs, but LVM recognizes it as a PV. To reiterate, neither /dev/mapper/case4t-scandatap1 (which I had used previously) nor /dev/case4t/scandata1 (as printed by fdisk) exists. And /dev/case4t/scandata (no partition number) cannot be mounted: $sudo mount -t ext3 /dev/case4t/scandata /mnt/new mount: wrong fs type, bad option, bad superblock on /dev/mapper/case4t-scandata, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so All I get on syslog is: [170059.538137] VFS: Can't find ext3 filesystem on dev dm-0. Thanks in advance for any help you can offer, Brian P.S. I am on Ubuntu GNU/Linux 2.6.28-11-server (Jaunty) (out of date, I know -- that's on the laundry list).

  Read the article

• Where's the Swap File/Partition?

  - by chrisbunney

  I'm investigating the virtual memory configuration of a Debian based Amazon EC2 instance, and as my background isn't in system admin, I'm slightly confused by what I'm seeing. We're using MongoDB, and the monitoring server we have indicates that the Mongo process is using about 20GB of swap space, however I can't figure out where this is located on the server. As far as I can tell from using the various suggested methods from Google, there is either a much smaller amount, or none at all. top indicates that there is 1.8GB of swap memory: top - 15:35:21 up 6 days, 3:23, 1 user, load average: 1.60, 1.43, 1.37 Tasks: 47 total, 2 running, 45 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 1.3%sy, 0.0%ni, 14.7%id, 83.8%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 3928924k total, 2855572k used, 1073352k free, 640564k buffers Swap: 0k total, 0k used, 0k free, 1887788k cached swapon -s doesn't seem to think there's any swap space: Filename Type Size Used Priority free -m doesn't think there's any swap either: total used free shared buffers cached Mem: 3836 3663 172 0 626 2701 -/+ buffers/cache: 336 3500 Swap: 0 0 0 And neither does vmstat: procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 3 0 66224 641372 2874744 0 0 21 5012 21 33 2 2 76 19 But cat /etc/fstab thinks there is a swap partition: /dev/xvda1 / ext3 defaults 1 1 /dev/xvda2 /mnt ext3 defaults 0 0 /dev/xvda3 swap swap defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 However df -k gives no indication of the xvda3 partition: Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 16513960 15675324 0 100% / tmpfs 1964460 8 1964452 1% /lib/init/rw udev 1914148 28 1914120 1% /dev tmpfs 1964460 4 1964456 1% /dev/shm So I really don't know what to make of this, because I appear to have a process using about 10 times more virtual memory than what might be available, and I have no idea where this virtual memory is on the system. I'm probably misinterpreting the output of the tools, so I'd be grateful if someone would be able to set me straight: What have I got wrong, what's the right interpretation, and how do you reach that interpretation? EDIT0: We use 10gen's MMS for monitoring the database, the relevant section for memory from the last data point is: "mem": { "virtual": 20749, "bits": 64, "supported": true, "mappedWithJournal": 20376, "mapped": 10188, "resident": 1219 }, This JSON is specific to the database process (I believe) rather than the system as a whole. fdisk -l /dev/xvda outputs... nothing? I tried each of the 3 xvda entries in /etc/fstab as well: root@ip:~# fdisk -l /dev/xvda1 Disk /dev/xvda1: 34.4 GB, 34359738368 bytes 255 heads, 63 sectors/track, 4177 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table root@ip:~# fdisk -l /dev/xvda2 root@ip:~# fdisk -l /dev/xvda3 root@ip:~# Edit1: Output of cat /proc/meminfo for the sake of completeness: MemTotal: 3928924 kB MemFree: 726600 kB Buffers: 648368 kB Cached: 2216556 kB SwapCached: 0 kB Active: 1945100 kB Inactive: 994016 kB Active(anon): 60476 kB Inactive(anon): 12952 kB Active(file): 1884624 kB Inactive(file): 981064 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 387180 kB Writeback: 0 kB AnonPages: 73380 kB Mapped: 1188260 kB Shmem: 48 kB Slab: 149768 kB SReclaimable: 146076 kB SUnreclaim: 3692 kB KernelStack: 1104 kB PageTables: 16096 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1964460 kB Committed_AS: 305572 kB VmallocTotal: 34359738367 kB VmallocUsed: 16760 kB VmallocChunk: 34359721448 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 3932160 kB DirectMap2M: 0 kB

  Read the article

• Troubleshooting High Load on Plesk LAMP Dedicated Server

  - by Callmeed

  I have 2 nearly identical dedicated servers with the same provider. They also run a nearly identical software stack: RedHat 5 64-bit, Plesk, PHP, Apache, & MySQL. We use them for hosting custom sites we build. The problem is, while our 1st server has a load average (in top) of around 0.3, the 2nd server consistently has a load average of around 4.0 or higher. Basic functions in Plesk are delayed and there is a bit of latency when executing shell commands. Anyone have ideas why it would be so high? And why it would differ from our other server so much? Here is my current top output (sorted by %MEM) ... Any help is much appreciated ... top - 21:48:04 up 100 days, 4:28, 1 user, load average: 3.74, 4.20, 4.23 Tasks: 336 total, 1 running, 335 sleeping, 0 stopped, 0 zombie Cpu(s): 0.8%us, 0.4%sy, 0.0%ni, 91.3%id, 7.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 12290884k total, 11886452k used, 404432k free, 2920212k buffers Swap: 2096472k total, 244k used, 2096228k free, 6560692k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22536 apache 15 0 860m 547m 6484 S 0.0 4.6 0:10.96 httpd 26467 apache 15 0 859m 546m 6408 S 0.0 4.5 0:07.67 httpd 3620 apache 15 0 859m 545m 5552 S 0.0 4.5 0:06.15 httpd 1895 apache 15 0 858m 544m 6356 S 0.0 4.5 0:08.25 httpd 16933 apache 15 0 858m 544m 5488 S 0.0 4.5 0:01.57 httpd 6431 apache 15 0 856m 542m 6076 S 10.6 4.5 0:05.32 httpd 14417 apache 15 0 856m 542m 5568 S 0.0 4.5 0:03.88 httpd 15403 apache 15 0 855m 541m 5616 S 0.0 4.5 0:03.73 httpd 19165 apache 15 0 853m 539m 6252 S 0.0 4.5 0:12.40 httpd 15898 apache 15 0 852m 539m 5376 S 0.0 4.5 0:02.68 httpd 14401 apache 15 0 851m 538m 5460 S 0.0 4.5 0:02.97 httpd 15393 apache 15 0 851m 538m 5404 S 0.0 4.5 0:03.12 httpd 15427 apache 15 0 851m 538m 5496 S 0.0 4.5 0:02.44 httpd 14412 apache 15 0 851m 538m 5324 S 0.0 4.5 0:02.15 httpd 18330 apache 15 0 851m 537m 5136 S 0.0 4.5 0:01.30 httpd 18303 apache 15 0 848m 535m 5140 S 0.0 4.5 0:00.47 httpd 21190 apache 15 0 845m 533m 3988 S 0.0 4.4 0:00.33 httpd 15923 root 18 0 822m 521m 9928 S 0.0 4.3 10:04.81 httpd 22021 apache 15 0 828m 520m 4964 S 0.0 4.3 0:00.16 httpd 22146 apache 15 0 823m 515m 3016 S 0.0 4.3 0:00.02 httpd 22345 apache 15 0 822m 514m 2408 S 0.0 4.3 0:00.00 httpd 14721 apache 15 0 733m 510m 488 S 0.0 4.3 0:00.00 httpd 5094 root 15 0 1452m 122m 15m S 1.0 1.0 852:24.24 java 4636 mysql 15 0 532m 57m 6440 S 1.0 0.5 488:05.84 mysqld 4799 popuser 15 0 166m 53m 2368 S 0.0 0.4 0:36.64 spamd 16761 popuser 15 0 159m 46m 2312 S 0.0 0.4 0:00.38 spamd 4797 root 15 0 158m 45m 2448 S 0.0 0.4 0:01.27 spamd 5074 root 34 19 255m 20m 2144 S 0.0 0.2 1:37.53 yum-updatesd 9917 named 15 0 366m 9804 1980 S 0.0 0.1 0:10.26 named 4332 sso 18 0 119m 8028 5212 S 0.0 0.1 0:00.06 sw-engine-cgi 4341 sso 18 0 119m 8028 5212 S 0.0 0.1 0:00.07 sw-engine-cgi 4350 sso 18 0 119m 8028 5212 S 0.0 0.1 0:00.09 sw-engine-cgi 4352 sso 18 0 119m 8028 5212 S 0.0 0.1 0:00.11 sw-engine-cgi 4376 ntp 15 0 23388 5020 3896 S 0.0 0.0 0:00.58 ntpd 4331 sw-cp-se 15 0 61336 4572 1480 S 0.0 0.0 5:53.22 sw-cp-serverd 4213 haldaemo 15 0 31252 4460 1684 S 0.0 0.0 0:01.52 hald 4778 postgres 18 0 117m 4164 3484 S 0.0 0.0 0:00.11 postmaster 18555 root 16 0 98.3m 3716 2852 S 0.0 0.0 0:00.01 sshd 4488 sso 18 0 119m 3044 224 S 0.0 0.0 0:00.00 sw-engine-cgi 4489 sso 18 0 119m 3044 224 S 0.0 0.0 0:00.00 sw-engine-cgi 4492 sso 18 0 119m 3044 224 S 0.0 0.0 0:00.00 sw-engine-cgi 4493 sso 18 0 119m 3044 224 S 0.0 0.0 0:00.00 sw-engine-cgi 4490 sso 18 0 119m 3040 220 S 0.0 0.0 0:00.00 sw-engine-cgi

  Read the article

• Linux bcm43224 wifi adapter slows down a couple minutes after boot

  - by Blubber

  I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

  Read the article

• Incorrect gzipping of http requests, can't find who's doing it

  - by Ned Batchelder

  We're seeing some very strange mangling of HTTP responses, and we can't figure out what is doing it. We have an app server handling JSON requests. Occasionally, the response is returned gzipped, but with incorrect headers that prevent the browser from interpreting it correctly. The problem is intermittent, and changes behavior over time. Yesterday morning it seemed to fail 50% of the time, and in fact, seemed tied to one of our two load-balanced servers. Later in the afternoon, it was failing only 20 times out of 1000, and didn't correlate with an app server. The two app servers are running Apache 2.2 with mod_wsgi and a Django app stack. They have identical Apache configs and source trees, and even identical packages installed on Red Hat. There's a hardware load balancer in front, I don't know the make or model. Akamai is also part of the food chain, though we removed Akamai and still had the problem. Here's a good request and response: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Length: 47 < Content-Type: application/x-javascript < Connection: keep-alive < Vary: Accept-Encoding < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 {"msg": "", "status": "OK", "printer_name": ""} And here's a bad one: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Type: application/x-javascript < Content-Encoding: gzip < Content-Length: 59 < Connection: keep-alive < Vary: Accept-Encoding < X-N: S < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 ?V?-NW?RPR?QP*.I,)-???A??????????T??Z? ??/ There are two things to notice about the bad response: It has two Content-Encoding headers, and the browsers seem to use the first. So they see an identity encoding header, and gzipped content, so they can't interpret the response. The bad response has an extra "X-N: S" header. Perhaps if I could find out what intermediary adds "X-N: S" headers to responses, I could track down the culprit...

  Read the article

• Disable error_log. Error_log flooding

  - by user36646

  Hello, i got an webserver running and old version of gambio (xt:commerce fork). The error_log in the dir over the public_html is flooding with errors. About 30mb in 15min. How can I disable this log? I can't fix all the errors. Here are a few examples of the errors: [warn] mod_fcgid: stderr: PHP Notice: Undefined variable: key in /usr/www/users/foo//includes/classes/class.inputfilter.php on line 98 [warn] mod_fcgid: stderr: PHP Notice: Undefined index: in /usr/www/users/foo/templ [warn] mod_fcgid: stderr: in /usr/www/users/foo/templates/gambio/source/inc/xtc_show_category_sectionc.inc.php on line 47 They are all errors of: "mod_fcgid: stderr". I tried to grep "error_log" and "error_report" in the public html dir, but i did not find anything. Here is a part from the phpinfo(): PHP Version 4.4.9 System Linux foobar.com 2.6.26-2-686-bigmem #1 SMP Sat Dec 26 09:26:36 UTC 2009 i686 Build Date Feb 11 2010 13:00:33 Configure Command './configure' '--prefix=/usr/local/php4' '--with-config-file-path=/etc/php4/cgi' '--with-gd' '--with-jpeg-dir' '--with-png-dir' '--with-tiff-dir' '--with-ttf' '--enable-force-cgi-redirect' '--enable-safe-mode' '--with-zlib' '--enable-ftp' '--enable-url-includes' '--enable-gd-native-ttf' '--enable-trans-sid' '--enable-dbase' '--with-db4' '--with-ldap' '--enable-bcmath' '--enable-calendar' '--enable-memory-limit' '--with-mcal=/usr' '--with-bz2' '--with-mod-dav' '--enable-sockets' '--with-kerberos' '--with-imap-ssl' '--enable-gd-imgstrttf' '--with-freetype-dir' '--with-curl' '--with-mysql' '--with-mhash' '--with-gdbm' '--with-pgsql' '--with-gettext' '--with-xml' '--with-mcrypt' '--with-openssl' '--with-dom' '--without-pear' '--enable-exif' '--with-zip' '--enable-wddx' '--disable-cli' '--enable-fastcgi' '--with-imap' '--enable-xslt' '--with-xslt-sablot=/usr/local/lib' '--enable-mbstring' '--with-dom-xslt' '--with-dom-exslt' Server API CGI/FastCGI Virtual Directory Support disabled Configuration File (php.ini) Path /home/httpd/php-ini/foo/php.ini PHP API 20020918 PHP Extension 20020429 Zend Extension 20050606 Debug Build no Zend Memory Manager enabled Thread Safety disabled Registered PHP Streams php, http, ftp, https, ftps, compress.bzip2, compress.zlib **Configuration PHP Core** Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output & & asp_tags Off Off auto_append_file no value no value auto_prepend_file no value no value browscap no value no value default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors Off Off doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 2039 2039 expose_php On On extension_dir /usr/local/php4/lib/php/extensions/no-debug-non-zts-20020429 /usr/local/php4/lib/php/extensions/no-debug-non-zts-20020429 file_uploads On On gpc_order GPC GPC highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .:/usr/local/lib/php/ .:/usr/local/lib/php/ log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc On On magic_quotes_runtime Off Off magic_quotes_sybase Off Off max_execution_time 120 120 max_input_nesting_level 500 500 max_input_time -1 -1 memory_limit 128000000 128000000 open_basedir /usr/www/users/foo:/usr/home/foo:/tmp:/usr/local/lib/php:/usr/local/rmagic:/usr/www/users/he/_system_ /usr/www/users/foo:/usr/home/foo:/tmp:/usr/local/lib/php:/usr/local/rmagic:/usr/www/users/he/_system_ output_buffering no value no value output_handler no value no value post_max_size 128000000 128000000 precision 14 14 register_argc_argv On On register_globals Off Off report_memleaks On On safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path /usr/sbin/sendmail -t /usr/sbin/sendmail -t serialize_precision 100 100 short_open_tag On On SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128000000 128000000 upload_tmp_dir /usr/foo/foo/.tmp /usr/foo/.tmp user_dir no value no value variables_order EGPCS EGPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance Off Off

  Read the article

• Server Admin is not allowing me to configure DNS

  - by Clinton Blackmore

  We have a Mac OS X 10.5.8 Server running DNS (and a few other services). When I connect to it (using Server Admin 10.5.3 [which comes from the Server Admin 10.5.7 tools]), and click to look at the DNS settings, all appears normal -- it shows many reverse entries and two top-level domains. However, when I select one of our domains and open the disclosure triangle, the list is empty! [There should be over a dozen entries, and the reverse entries do show up.] If I then tell it I want to add, say, an A Record to the domain, almost everything disappears -- and I am left with a list showing our two domains, one with a disclosure triangle underneath it showing a single entry, and one reverse entry to correspond to the new A record. named appears to be working fine. DNS names resolve. It appears to simply be that Server Admin is having problems with the data on the computer. No one here would have manually created a DNS entry. Now, while I think I've backed up the DNS (I backed up /var/named/, /etc/named.conf, and /etc/dns/, as mentioned here), I'm really not sure if just replacing the files would restore the DNS settings we have if things go south. I am contemplating going to settings and changing the log level from "Information" to "Debug", but 1) I am just a little concerned that it might write a bad configuration to the disk, and 2) I think it would only affect named and not Server Admin, and, so far as I can tell, named is not having a problem. (Nothing looks strange in /Library/Logs/named.log when I open it via Console/Terminal. Oddly, though, when I click on the 'log' button for DNS in Server Admin, I see no text at all, just a fully white window. When I look at one of our secondary DNS servers, I am able to see the log file through Server Admin.) This entry appears in the system log when I run Server Admin on the server: Jun 17 09:02:08 od1 Server Admin[3892]: Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription It seems to occur after I've looked at DNS, look at another service, and then click back on DNS. Think that the most likely cause is a corrupt configuration file, I glanced through all the files that I backed up, and none of them is obviously gobbledygook. Here are some oddities I find when running Server Admin from a remote computer to manage the DNS. When I click to see the log file for DNS, the server starts writing messages like these to its system.log: Jun 17 09:59:04 od1 kernel[0]: Limiting open port RST response from 252 to 250 packets per second Jun 17 09:59:06 od1 kernel[0]: Limiting open port RST response from 258 to 250 packets per second This stops when I click on a different service. The inderterminate progress indicator (the spinning wheel that appears beside the "Revert" and "Save" buttons in the bottom-right corner of Server Admin) looks really strange. As far as I can tell, instead of just spinning and waiting, it is being told to start spinning repeatedly, resulting in a jerky animation. Here are some of the messages being logged on the computer running Server Admin: At startup: *** ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *** *** ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0x18758f50) failed. *** (These messages don't concern me too much as they go away for a while if you delete ~/Library/Preferences/com.apple.ServerAdmin.plist). At shutdown: 2010-06-17 10:02:17.202 Server Admin[7770:10b] *** -[GroupTextField windowDidResignKey:]: unrecognized selector sent to instance 0x16e12490 More concerning are these messages: 2010-06-17 09:59:47.269 Server Admin[7770:10b] Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription Server Admin(7770,0xb0453000) malloc: *** error for object 0x1c115390: double free *** set a breakpoint in malloc_error_break to debug 2010-06-17 10:01:00.795 Server Admin[7770:10b] *** -[ServiceEntry sessionHost]: unrecognized selector sent to instance 0x2af500 Any thoughts on: what the problem is how I can troubleshoot it or how to fix it? If I do need to wipe out DNS and restart, is there a good way to do this?

  Read the article

• IP address reuse on macvlan devices

  - by Alex Bubnoff

  I'm trying to create easy to use and possibly simple testing environment for some product and got some strange behaviour of macvlan's. What I'm trying to achieve: make a toolset for one-line start/stop of lxc containers(via docker) bound to external ip(I have enough of it on host machine). So, I'm doing something like this: docker run -d -name=container_name container_image pipework eth1 container_name ip/prefix_len@gateway and pipework here does this: GUEST_IFNAME=ph$NSPID$eth1 ip link add link eth1 dev $GUEST_IFNAME type macvlan mode bridge ip link set eth1 up ip link set $GUEST_IFNAME netns $NSPID ip netns exec $NSPID ip link set $GUEST_IFNAME name eth1 ip netns exec $NSPID ip addr add $IPADDR dev eth1 ip netns exec $NSPID ip route delete default ip netns exec $NSPID ip link set eth1 up ip netns exec $NSPID ip route replace default via $GATEWAY ip netns exec $NSPID arping -c 1 -A -I eth1 $IPADDR And it works for first time per IP. But for second time and later packets for containers IP isn't getting into container, while all configuration seem fine. So it looks like this: External machine ? ping 212.76.131.212 ....silence.... Host machine root@ubuntu:~# ip link show eth1 2: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:15:17:c9:e1:c9 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr show eth1 2: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:15:17:c9:e1:c9 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# tcpdump -v -i eth1 icmp tcpdump: WARNING: eth1: no IPv4 address assigned tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 00:00:46.542042 IP (tos 0x0, ttl 60, id 9623, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2345, length 64 00:00:47.549969 IP (tos 0x0, ttl 60, id 9624, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2346, length 64 00:00:48.558143 IP (tos 0x0, ttl 60, id 9625, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2347, length 64 00:00:49.566319 IP (tos 0x0, ttl 60, id 9626, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2348, length 64 00:00:50.573999 IP (tos 0x0, ttl 60, id 9627, offset 0, flags [DF], proto ICMP (1), length 84) 5.134.221.98 212.76.131.212: ICMP echo request, id 6718, seq 2349, length 64 ^C 5 packets captured 5 packets received by filter 0 packets dropped by kernel 1 packet dropped by interface Host machine, netns of container root@ubuntu:~# ip netns exec 32053 ip link show eth1 48: eth1@if2: mtu 1500 qdisc noqueue state UNKNOWN link/ether b2:12:f7:cc:a1:9d brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip netns exec 32053 ip addr show eth1 48: eth1@if2: mtu 1500 qdisc noqueue state UNKNOWN link/ether b2:12:f7:cc:a1:9d brd ff:ff:ff:ff:ff:ff inet 212.76.131.212/29 scope global eth1 inet6 fe80::b012:f7ff:fecc:a19d/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip netns exec 32053 tcpdump -v -i eth1 icmp tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes ....silence.... ^C 0 packets captured 0 packets received by filter 0 packets dropped by kernel So, can anyone say, what can it be? Can this be caused by not a bug in macvlan implementation? Is there any tools I can use to debug that configuration?

  Read the article

• Why am I getting a 403 error on a POST to a PHP script?

  - by John Gallagher

  Background I want to allow my users to submit a crash report which will get emailed to me. I'm using UKCrashReporter with the bundled PHP script I've modified. This code does a POST to a specified URL along with the crash report. I'm on a shared server running Linux. My main domain is synapticmishap.co.uk. The Problem When I send the crash report off, on the Cocoa side, it reports as having sent it successfully, but I don't receive an email. The code has been used in lots of other well established Cocoa projects and it was working for me a few months ago. That leads me to conclude that the problems are related to my web server setup, something I know almost nothing about. When I look at my log files, I see entries like this: IP Redacted - - [10/Jun/2010:09:47:53 +0100] "POST /synapticmishap/crashreportform.php HTTP/1.1" 403 74 "-" "UKCrashReporter" What I've tried I've tried accessing the page at http://synapticmishap.co.uk/synapticmishap/crashreportform.php via a browser. It loads fine. I've made sure the permissions on this php script are set so anyone can execute it. I've tried removing the deny entries from the section of .htaccess at various levels starting with root. I've downloaded the URLParams plugin for Firefox which allows you to simulate POSTs. I put in the URL above and tried a post with "crashlog" as the parameter and "test" as the value. This generated a 200 log entry in my log file - it seemed to work, although no mail message was sent. Code I've got the following at http://synapticmishap.co.uk/synapticmishap/crashreportform.php. I've simplified it to just the bare bones in an effort to get it working. <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <title>Crash Report</title> </head> <body> <p>This page contains super special magic which submits a crash report item to me.</p> <p>Nothing to see here - move along.</p> <?php mail( "[email protected]", "Crash Report", "\r\n\r\nThis is a test."); ?> </body> </html> This is my top level .htaccess file: RewriteEngine on # -FrontPage- IndexIgnore .htaccess */.??* *~ *# */HEADER* */README* */_vti* <Limit GET POST> order deny,allow deny from all allow from all </Limit> <Limit PUT DELETE> order deny,allow deny from all </Limit> Options All -Indexes RewriteCond %{HTTP_HOST} ^synapticmishap.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.synapticmishap.co.uk$ RewriteCond %{HTTP_HOST} ^lapsusapp.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.lapsusapp.co.uk$ RewriteRule ^/?$ "http\:\/\/synapticmishap\.co\.uk\/synapticmishap\/lapsuspromo\/" [R=301,L] RewriteCond %{HTTP_HOST} ^jgtutoring.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.jgtutoring.co.uk$ RewriteRule ^/?$ "http\:\/\/synapticmishap\.co\.uk\/tutoring" [R=301,L] RewriteCond %{HTTP_HOST} ^synapticmishap.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.synapticmishap.co.uk$ RewriteRule ^/?$ "http\:\/\/synapticmishap\.co\.uk\/synapticmishap" [R=301,L] RewriteCond %{HTTP_HOST} ^jgediting.co.uk$ [OR] RewriteCond %{HTTP_HOST} ^www.jgediting.co.uk$ RewriteRule ^/?$ "http\:\/\/synapticmishap\.co\.uk\/editing" [R=301,L] RewriteCond %{HTTP_REFERER} !^$ RewriteCond %{HTTP_REFERER} !^http://synapticmishap.co.uk/.*$ [NC] RewriteCond %{HTTP_REFERER} !^http://synapticmishap.co.uk$ [NC] RewriteCond %{HTTP_REFERER} !^http://www.synapticmishap.co.uk/.*$ [NC] RewriteCond %{HTTP_REFERER} !^http://www.synapticmishap.co.uk$ [NC] RewriteCond %{HTTP_REFERER} !^http://synapticmishap.co.uk/synapticmishap/crashreportform.php/.*$ [NC] RewriteCond %{HTTP_REFERER} !^http://synapticmishap.co.uk/synapticmishap/crashreportform.php$ [NC] RewriteRule .*\.(jpg|jpeg|gif|png|bmp)$ - [F,NC] Help! I'm at the end of my tether with this and I'm in a very unfamiliar space with all this web stuff. I'd be most appreciative of any thoughts people had on why this isn't working. Thanks.

  Read the article

• Linux Kernel not passing through multicast UDP packets

  - by buecking

  Recently I've set up a new Ubuntu Server 10.04 and noticed my UDP server is no longer able to see any multicast data sent to the interface, even after joining the multicast group. I've got the exact same set up on two other Ubuntu 8.04.4 LTS machines and there is no problem receiving data after joining the same multicast group. The ethernet card is a Broadcom netXtreme II BCM5709 and the driver used is: b $ ethtool -i eth1 driver: bnx2 version: 2.0.2 firmware-version: 5.0.11 NCSI 2.0.5 bus-info: 0000:01:00.1 I'm using smcroute to manage my multicast registrations. b$ smcroute -d b$ smcroute -j eth1 233.37.54.71 After joining the group ip maddr shows the newly added registration. b$ ip maddr 1: lo inet 224.0.0.1 inet6 ff02::1 2: eth0 link 33:33:ff:40:c6:ad link 01:00:5e:00:00:01 link 33:33:00:00:00:01 inet 224.0.0.1 inet6 ff02::1:ff40:c6ad inet6 ff02::1 3: eth1 link 01:00:5e:25:36:47 link 01:00:5e:25:36:3e link 01:00:5e:25:36:3d link 33:33:ff:40:c6:af link 01:00:5e:00:00:01 link 33:33:00:00:00:01 inet 233.37.54.71 <------- McastGroup. inet 224.0.0.1 inet6 ff02::1:ff40:c6af inet6 ff02::1 So far so good, I can see that I'm receiving data for this multicast group. b$ sudo tcpdump -i eth1 -s 65534 host 233.37.54.71 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65534 bytes 09:30:09.924337 IP 192.164.1.120.58848 > 233.37.54.71.15572: UDP, length 212 09:30:09.947547 IP 192.164.1.120.58848 > 233.37.54.71.15572: UDP, length 212 09:30:10.108378 IP 192.164.1.120.58866 > 233.37.54.71.15574: UDP, length 268 09:30:10.196841 IP 192.164.1.120.58848 > 233.37.54.71.15572: UDP, length 212 ... I can also confirm that the interface is receiving mcast packets. b $ ethtool -S eth1 | grep mcast_pack rx_mcast_packets: 103998 tx_mcast_packets: 33 Now here's the problem. When I try to capture the traffic using a simple ruby UDP server I receive zero data! Here's a simple server that reads data send on port 15572 and prints the first two characters. This works on the two 8.04.4 Ubuntu Servers, but not the 10.04 server. require 'socket' s = UDPSocket.new s.bind("", 15572) 5.times do text, sender = s.recvfrom(2) puts text end If I send a UDP packet crafted in ruby to localhost, the server receives it and prints out the first two characters. So I know that the server above is working correctly. irb(main):001:0> require 'socket' => true irb(main):002:0> s = UDPSocket.new => #<UDPSocket:0x7f3ccd6615f0> irb(main):003:0> s.send("I2 XXX", 0, 'localhost', 15572) When I check the protocol statistics I see that InMcastPkts is not increasing. While on the other 8.04 servers, on the same network, received a few thousands packets in 10 seconds. b $ netstat -sgu ; sleep 10 ; netstat -sgu IcmpMsg: InType3: 11 OutType3: 11 Udp: 446 packets received 4 packets to unknown port received. 0 packet receive errors 461 packets sent UdpLite: IpExt: InMcastPkts: 4654 <--------- Same as below OutMcastPkts: 3426 InBcastPkts: 9854 InOctets: -1691733021 OutOctets: 51187936 InMcastOctets: 145207 OutMcastOctets: 109680 InBcastOctets: 1246341 IcmpMsg: InType3: 11 OutType3: 11 Udp: 446 packets received 4 packets to unknown port received. 0 packet receive errors 461 packets sent UdpLite: IpExt: InMcastPkts: 4656 <-------------- Same as above OutMcastPkts: 3427 InBcastPkts: 9854 InOctets: -1690886265 OutOctets: 51188788 InMcastOctets: 145267 OutMcastOctets: 109712 InBcastOctets: 1246341 If I try forcing the interface into promisc mode nothing changes. At this point I'm stuck. I've confirmed the kernel config has multicast enabled. Perhaps there are other config options I should be checking? b $ grep CONFIG_IP_MULTICAST /boot/config-2.6.32-23-server CONFIG_IP_MULTICAST=y Any thoughts on where to go from here?

  Read the article

• Centos 7. Freeradius fails to start on boot

  - by Alex

  I was messing around with FreeRADIUS and MySQL (MariaDB) and it seems FreeRADIUS service can't start properly on startup. But it starts fine using root user or in debug mode (radiusd -X) and works just fine! Debug mode shows no errors. systemctl command shows that radiusd.service has failed to start. /var/log/messages output: Aug 21 15:52:29 nexus-test systemd: Starting The Apache HTTP Server... Aug 21 15:52:29 nexus-test systemd: Starting MariaDB database server... Aug 21 15:52:29 nexus-test systemd: Starting FreeRADIUS high performance RADIUS server.... Aug 21 15:52:29 nexus-test systemd: Started OpenSSH server daemon. Aug 21 15:52:29 nexus-test mysqld_safe: 140821 15:52:29 mysqld_safe Logging to '/var/log/mariadb/mariadb.log'. Aug 21 15:52:29 nexus-test mysqld_safe: 140821 15:52:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql Aug 21 15:52:30 nexus-test systemd: Started Postfix Mail Transport Agent. Aug 21 15:52:30 nexus-test avahi-daemon[604]: Registering new address record for fe80::250:56ff:fe85:e4af on eth0.*. Aug 21 15:52:30 nexus-test systemd: radiusd.service: control process exited, code=exited status=1 Aug 21 15:52:30 nexus-test systemd: Failed to start FreeRADIUS high performance RADIUS server.. Aug 21 15:52:30 nexus-test systemd: Unit radiusd.service entered failed state. Aug 21 15:52:31 nexus-test kdumpctl: kexec: loaded kdump kernel Aug 21 15:52:31 nexus-test kdumpctl: Starting kdump: [OK] Aug 21 15:52:31 nexus-test systemd: Started Crash recovery kernel arming. Aug 21 15:52:31 nexus-test systemd: Started The Apache HTTP Server. Aug 21 15:52:31 nexus-test systemd: Started MariaDB database server. /var/log/radius/radius.log output: Thu Aug 21 15:24:16 2014 : Info: rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Thu Aug 21 15:24:16 2014 : Info: rlm_sql (sql): Attempting to connect to database "radius" Thu Aug 21 15:24:16 2014 : Info: rlm_sql (sql): Opening additional connection (0) Thu Aug 21 15:24:16 2014 : Error: rlm_sql_mysql: Couldn't connect socket to MySQL server radius@localhost:radius Thu Aug 21 15:24:16 2014 : Error: rlm_sql_mysql: Mysql error 'Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)' Thu Aug 21 15:24:16 2014 : Error: rlm_sql (sql): Opening connection failed (0) Thu Aug 21 15:24:16 2014 : Error: /etc/raddb/mods-enabled/sql[47]: Instantiation failed for module "sql" After seeing this I tried to replicate the problem, killed mariadb.service and started to run debug mode again. And it spits out the same problem as in the radius.log. I tried disabling iptables and firewalld and rebooting, but no luck: systemctl disable iptables systemctl disable firewalld So maybe the problem is in the process startup order or delay of some kind. Maybe FreeRADIUS's SQL module can't connect to not yet started MariaDB? If it, how can I fix this? In earlier versions of RHEL/CENTOS I know you easily see service start order in like rc.d or stuff, now IDK. I am new to this fancy "systemd", "systemctl", "firewalld" stuff Centos 7 introduced so sorry I'm a little bit confused. Also this new FreeRADIUS 3 structure... PS. MariaDB is enabled on startup, credentials in FR DB configuration are correct A little update: cat /etc/systemd/system/multi-user.target.wants/radiusd.service output: [Unit] Description=FreeRADIUS high performance RADIUS server. After=syslog.target network.target [Service] Type=forking PIDFile=/var/run/radiusd/radiusd.pid ExecStartPre=-/bin/chown -R radiusd.radiusd /var/run/radiusd ExecStartPre=/usr/sbin/radiusd -C ExecStart=/usr/sbin/radiusd -d /etc/raddb ExecReload=/usr/sbin/radiusd -C ExecReload=/bin/kill -HUP $MAINPID [Install] WantedBy=multi-user.target

  Read the article

• MX records not correctly updated by the Google DNS servers

  - by Mac_Cain13

  We are currently losing some e-mail and we discovered that this is caused by a wrong DNS setting. We used a CNAME for our MX record an thats not allowed. So about 2 weeks ago we changed it to an A-record to fix the problem. It seems all major DNS services (like OpenDNS and ISPs) have synced their records and are returning correct results on our DNS queries. But Googles DNS service (at 8.8.8.8) is still returning the CNAME values and we still some e-mails are not delivered correctly. Query on OpenDNS: ; <<>> DiG 9.7.3-P3 <<>> mx wrep.nl @208.67.222.222 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 51231 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;wrep.nl. IN MX ;; ANSWER SECTION: wrep.nl. 3595 IN MX 10 druif.wrep.nl. ;; Query time: 21 msec ;; SERVER: 208.67.222.222#53(208.67.222.222) ;; WHEN: Fri Nov 25 21:36:58 2011 ;; MSG SIZE rcvd: 47 Query on Google DNS: ; <<>> DiG 9.7.3-P3 <<>> mx wrep.nl @8.8.8.8 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12124 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;wrep.nl. IN MX ;; ANSWER SECTION: wrep.nl. 2372 IN CNAME druif.wrep.nl. ;; AUTHORITY SECTION: wrep.nl. 572 IN SOA ns0.freshdns.nl. hostmaster.twilightinc.nl. 2011112401 14400 3600 604800 3600 ;; Query time: 94 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Fri Nov 25 21:38:10 2011 ;; MSG SIZE rcvd: 117 So is there anyone who can explain why Google is responding with a different (incorrect) result two weeks after the last change? And how can we get Google to update their DNS records correctly? Any help is very appreciated. (Please note that other domains that are managed by the same DNS servers/tools are working fine.)

  Read the article

• Possible to give one connection to each IP?

  - by Alice

  I am having overloading problems. Too many connections, and some IP has more than 20 connection at once. I do this command. netstat -anp |grep 'tcp\|udp' | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n To get total of connection and this is the output: 1 106.3.98.81 1 106.3.98.82 1 108.171.251.2 1 110.85.103.207 1 111.161.30.217 1 113.53.103.55 1 119.235.237.20 1 124.106.19.34 1 157.55.32.166 1 157.55.33.49 1 157.55.34.28 1 175.141.103.239 1 180.76.5.59 1 180.76.5.61 1 188.235.165.216 1 205.213.195.70 1 216.157.222.25 1 218.93.205.100 1 222.77.209.105 1 27.153.148.109 1 27.159.194.242 1 27.159.253.71 1 54.242.122.201 1 61.172.50.99 1 65.55.24.239 1 71.179.78.5 1 74.125.136.27 1 74.125.182.30 1 74.125.182.36 1 79.112.225.39 1 93.190.139.208 2 124.227.191.67 2 157.55.33.84 2 157.55.35.34 2 190.66.3.107 2 203.87.153.38 2 220.161.119.3 2 221.6.15.156 2 27.153.148.116 2 27.159.197.0 2 96.47.224.42 3 202.14.70.1 3 218.6.15.42 3 222.77.218.226 3 222.77.224.187 3 37.59.66.100 3 46.4.181.244 3 87.98.254.192 3 91.207.8.62 4 188.143.233.222 4 218.108.168.166 4 221.12.154.18 4 93.182.157.8 4 94.142.128.183 5 180.246.170.187 5 8.21.6.226 6 178.137.94.87 6 218.93.205.112 7 199.15.234.222 9 9 125.253.97.6 10 178.137.17.196 11 46.118.192.179 12 212.79.14.14 21 72.201.187.135 27 0.0.0.0 Can anyone give me some directions, my server crashed few times this week because of this. Thanks. EDIT: Alright, my error logs says: [Thu Oct 18 12:17:39 2012] [error] could not make child process 4842 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4843 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4855 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4856 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4861 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4869 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4872 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4873 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4874 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4875 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4876 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4880 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4882 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4885 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4897 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4900 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4901 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4906 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4907 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4925 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4926 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4927 exit, attempting to continue anyway [Thu Oct 18 12:17:39 2012] [error] could not make child process 4931 exit, attempting to continue anyway [Thu Oct 18 12:17:40 2012] [notice] caught SIGTERM, shutting down PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20060613+lfs/curl.iso' - /usr/lib/php5/20060613+lfs/curl.iso: cannot open shared object file: No such file or directory in Unknown on line 0 [Thu Oct 18 12:17:45 2012] [notice] Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny10 with Suhosin-Patch configured -- resuming normal operations And I have over thousands of line saying:(each has different process id) [Thu Oct 18 12:17:38 2012] [error] child process 4906 still did not exit, sending a SIGKILL And I also have line saying: [Wed Oct 17 09:44:58 2012] [error] server reached MaxClients setting, consider raising the MaxClients setting <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 50 MaxClients 300 MaxRequestsPerChild 5000 </IfModule>

  Read the article

• How to stop windows resizing when the monitor display channel is turned off / switched to different source

  - by Heartspeace

  Have a new 6870 ati radeon adapter with its drivers set to 1080p 60hz resolution hooked up to a 2008 47" high end Samsung HDMI based TV. However, when the tv is turned to a different hdmi input -(when I come back into windows) somehow Windows decides to resize all the open apps to a lower resolution - including some of the side docked hidden pop-outs. When it resizes those though - it just sticked the pop-outs in the middle of the screen and all the resized windows from the open applications in the top left corner - all of them stacked on top of each other and resized to the smaller resolution. The things that seem to be ok after returning are the icons on the desktop, the taskbar, and the sidebar. Anyone have any knowledge of 1) how this happens 2) why it happens 3) how to stop it from resizing the applications and some of the docked pop-outs (they are not really resized after returning - they are just stuck in the middle of the screen approximately where they would be if the right or bottom sidebar should be if the screen was resized to that lower resolution). My hypothesis is that upon losing HDMI signal - that Windows is told by something (driver, or windows itself) that the resolution to be without a signal being present (noting that HDMI signals and handshakes are two way on HDMI devices. If it loses the signal or the tv is switched to another device - then the display adapter must figure that out and tell Windows or figures it out and designs randomly to change the display size). Any and all help is most appreciated. I asked AMD/ATI - but they said they don't know why or how this is happening. I was hoping that maybe this is THE place that the super users truly go to - those that develop display adapter drivers, or that dive deeply into these areas of windows. If there is better sites or just competing sites - please advise - noting I have already written AMD/ATI. HP Response / Additions 4/7/2011 It is really nice to get your reply Shinrai. (BTW is it proper etiquette on these forums to have a discussion?) Yet 'only one issue' - I am using a single display in this case - so Windows doesn't move application windows to another desktop. Windows (or something) decides to shrink the desktop it currently has and resize all windows to the maximum size of the desktop. As such I would be glad if Windows would just keep the current size of the one desktop that is in operation. I also know that this does NOT happen on monitors connected with DVI. There I have had one and two monitors setup and it doesn't resize those screens at all when disconnecting monitors, turning them off, whatever... they stay solid - everything in place - to such an extent that if you forgot the other monitor is off - you will have troubles finding some windows without using one of the control app utilities. So if I could even get the HDMI handling by Windows (or the display driver) ( 1] which is doing this anyway the display driver or Windows - and 2] where is that other resolution size (1024x768) coming from - its not the smallest and its not the largest?) to be having like DVI - Life would be golden (for this aspect anyway). ** found others with same problem in this thread: http://hardforum.com/showthread.php?t=1507324 Thanks, HP

  Read the article

• IPv6 host route is deleted after PMTU expires

  - by SAPikachu

  I am experimenting my new IPv6 tunnel setup between my local Ubuntu box and a scratch Linode. I set up some docker containers, configured 6in4 tunnel server and IPv6 forwarding on the Linode: # uname -a Linux argo 3.15.4-x86_64-linode45 #1 SMP Mon Jul 7 08:42:36 EDT 2014 x86_64 x86_64 x86_64 GNU/Linux # ip addr .. snipped .. 48: sit-sapikachu: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1472 qdisc noqueue state UNKNOWN group default link/sit 106.185.41.115 peer 1.2.3.4 inet6 fd00::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::6ab9:2973/64 scope link valid_lft forever preferred_lft forever 13: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default link/ether 56:84:7a:fe:97:99 brd ff:ff:ff:ff:ff:ff inet 172.17.42.1/16 scope global docker0 valid_lft forever preferred_lft forever inet6 fc00::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::5484:7aff:fefe:9799/64 scope link valid_lft forever preferred_lft forever // Docker containers are bridged to docker0 On my local box, I configured a 6in4 tunnel interface to connect to the Linode box, and added a host route to one of the docker container: # uname -a Linux sapikachu-netbox 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux # ip addr .. snipped .. 16: sit-argo: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN group default link/sit 0.0.0.0 peer 106.185.41.115 inet6 fd00::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::a97:302/64 scope link valid_lft forever preferred_lft forever inet6 fe80::ac19:1/64 scope link valid_lft forever preferred_lft forever inet6 fe80::c0a8:1f0/64 scope link valid_lft forever preferred_lft forever inet6 fe80::c0a8:1fa/64 scope link valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether *** brd ff:ff:ff:ff:ff:ff .. snipped .. inet6 fd00:0:1::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::2e0:6fff:fe0e:365e/64 scope link valid_lft forever preferred_lft forever # ip route replace fc00::1875:8606:d8c1:8a9d via fd00::1 # Add route to docker container # ip -6 route .. snipped unrelated routes fc00::1875:8606:d8c1:8a9d via fd00::1 dev sit-argo metric 1024 expires 590sec mtu 1472 fd00::/64 dev sit-argo proto kernel metric 256 fd00:0:1::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sit-argo proto kernel metric 256 (Note that tunnel MTU on my local box is different from the server, this is intentional for testing) After adding the host route to the docker container (fc00::1875:8606:d8c1:8a9d), I can ping the container without problem until the route expires. After that I couldn't get reply any more. If I run ip -6 route in a few seconds after expiration, expiration time of the host route will be a negative number: fc00::1875:8606:d8c1:8a9d via fd00::1 dev sit-argo metric 1024 expires -1sec And output of ip route get fc00::1875:8606:d8c1:8a9d shows that it is routed to my default IPv6 gateway (which fails to route it correctly of course, since the address is not globally routable). After some time, the host route disappears without a trace. This problem won't happen if I do either one of the following things: Set MTU of tunnel on my local box to be the same as the server (1472). The route won't have expiration time in both ip -6 route and ip route get in this case. Instead of adding a host route, add a route with network mask (even /127 works). In this case ip -6 route shows the route without expiration time, ip route get shows expiration time but it will be correctly refreshed after expiration. Although this problem can be easily resolved, I am curious to know why this happens. Is there error in my configuration, or is this a kernel bug?

  Read the article

• iptables 1.4 and passive FTP on custom port

  - by Cracky

  after the upgrade from debian squeeze to wheezy I've got a problem with passive FTP connection. I could narrow it to be iptables related, as I could connect via FTP w/o problems after adding my IP to the iptables ACCEPT rule. Before the upgrade I was able just to do modprobe nf_conntract_ftp ports=21332 and adding iptables -A THRU -p tcp --dport 21332 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT now..it doesn't help anymore. The INPUT rule is being triggered as I can see in the counter, but the directory listing is the last thing it does. Setting up a passive-port range is the last thing I want to do, I dislike open ports. I also tried the trick with helper mod by adding following rule before the actual rule for 21332 iptables -A THRU -p tcp -i eth0 --dport 21332 -m state --state NEW -m helper --helper ftp-21332 -j ACCEPT but it doesn't help and is even not being triggered according to counter. The rule in the next line (w/o helper) is being triggered.. here some info: # iptables --version iptables v1.4.14 # lsmod |grep nf_ nf_nat_ftp 12460 0 nf_nat 18242 1 nf_nat_ftp nf_conntrack_ftp 12605 1 nf_nat_ftp nf_conntrack_ipv4 14078 32 nf_nat nf_defrag_ipv4 12483 1 nf_conntrack_ipv4 nf_conntrack 52720 7 xt_state,nf_conntrack_ipv4,xt_conntrack,nf_conntrack_ftp,nf_nat,nf_nat_ftp,xt_helper # uname -a Linux loki 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux # iptables-save # Generated by iptables-save v1.4.14 on Sun Jun 30 03:54:28 2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :BLACKLIST - [0:0] :LOGDROP - [0:0] :SPAM - [0:0] :THRU - [0:0] :WEB - [0:0] :fail2ban-dovecot-pop3imap - [0:0] :fail2ban-pureftpd - [0:0] :fail2ban-ssh - [0:0] -A INPUT -p tcp -m multiport --dports 110,995,143,993 -j fail2ban-dovecot-pop3imap -A INPUT -p tcp -m multiport --dports 21,21332 -j fail2ban-pureftpd -A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh -A INPUT -p tcp -m multiport --dports 110,995,143,993 -j fail2ban-dovecot-pop3imap -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,RST FIN,RST -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,ACK FIN -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags ACK,URG URG -j DROP -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -j BLACKLIST -A INPUT -j THRU -A INPUT -j LOGDROP -A OUTPUT -j ACCEPT -A OUTPUT -s 93.223.38.223/32 -j ACCEPT -A BLACKLIST -s 38.113.165.0/24 -j LOGDROP -A BLACKLIST -s 202.177.216.0/24 -j LOGDROP -A BLACKLIST -s 130.117.190.0/24 -j LOGDROP -A BLACKLIST -s 117.79.92.0/24 -j LOGDROP -A BLACKLIST -s 72.47.228.0/24 -j LOGDROP -A BLACKLIST -s 195.200.70.0/24 -j LOGDROP -A BLACKLIST -s 195.200.71.0/24 -j LOGDROP -A LOGDROP -m limit --limit 5/sec -j LOG --log-prefix drop_packet_ --log-level 7 -A LOGDROP -p tcp -m tcp --dport 25 -m limit --limit 2/sec -j LOG --log-prefix spam_blacklist --log-level 7 -A LOGDROP -p tcp -m tcp --dport 80 -m limit --limit 2/sec -j LOG --log-prefix web_blacklist --log-level 7 -A LOGDROP -p tcp -m tcp --dport 22 -m limit --limit 2/sec -j LOG --log-prefix ssh_blacklist --log-level 7 -A LOGDROP -j REJECT --reject-with icmp-host-prohibited -A THRU -p icmp -m limit --limit 1/sec -m icmp --icmp-type 8 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 25 -j ACCEPT -A THRU -i eth0 -p udp -m udp --dport 53 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 110 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 143 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 465 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 585 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 993 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 995 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 2008 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 10011 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 21332 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 30033 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A fail2ban-dovecot-pop3imap -j RETURN -A fail2ban-dovecot-pop3imap -j RETURN -A fail2ban-pureftpd -j RETURN -A fail2ban-pureftpd -j RETURN -A fail2ban-ssh -j RETURN -A fail2ban-ssh -j RETURN COMMIT # Completed on Sun Jun 30 03:54:28 2013 So, as I said, I have no problems with connecting when adding my IP to go through..but that's not a solution as noone except me can connect anymore~ If someone got an idea what the problem is, please help me! Thanks Cracky

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >