Search Results

Search found 10445 results on 418 pages for 'basic'.

Page 61/418 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Is there any reason to install software as root as opposed to sudo installing software as a sudoer?

  - by Tchalvak

  I'm setting up a new server running Ubuntu Server Edition, and I'm not certain what the difference would be between installing most of the basic software as root, vs installing the basic software as an admin user using sudo apt-get install . For one thing, I'm not sure whether after installing the software as root, I'll need sudo access when running the software as a user (e.g. if I install git as root). On the other hand, if I install software as a user, I could conceive of it not being available to other users that I create in the future. What's the best practice here?

  Read the article

• How do I force .htaccess authorization to occur over ssl?

  - by kenja

  I'm trying to force a particular directory to require only allowed IPs and a valid username/password through basic authorization. To ensure that the username/password are sent in encrypted form, I want the directory to also force SSL use. Here is what I have in my .htaccess file: # Force HTTPS-Connection RewriteEngine On RewriteCond %{SERVER_PORT} !^443$ RewriteRule (.*) https://www.mywebsite.com%{REQUEST_URI} [R,L] ## password begin ## AuthName "Restricted Access" AuthUserFile /var/www/admin/.htpasswd AuthType Basic Require valid-user Order deny,allow Deny from all Allow from 79.1.231.151 62.123.134.83 Satisfy All Unfortunately, when I access that directory using http protocol, it is asking for the password before it redirects the page to the secure version. This means the password is sent unencrypted. What am I doing wrong? Is there a way to do this?

  Read the article

• Linux bash: when to use egrep instead of grep?

  - by Michael Mao

  Hi all : I am preparing for a Linux terminal assessment now, I tried to Google and found most resources are referring to the basic "grep" rather than the more powerful "egrep" -- well, that is at least what the professor said in lecture. I am always working with small samples so performance tuning is a thing too far away. So basically I'd like to know are there any areas where I must switch to egrep to do it in a better way? Is it safe to work with basic "grep" as for now? will there be potential risks? Sorry about my limited knowledge on Linux shell commands, the man page looks like a maze to me and honestly I haven't put much time in understanding all the features both command provide.

  Read the article

• How can artificially create a slow query in mysql?

  - by Gray Race

  I'm giving a hands on presentation in a couple weeks. Part of this demo is for basic mysql trouble shooting including use of the slow query log. I've generated a database and installed our app but its a clean database and therefore difficult to generate enough problems. I've tried the following to get queries in the slow query log: Set slow query time to 1 second. Deleted multiple indexes. Stressed the system: stress --cpu 100 --io 100 --vm 2 --vm-bytes 128M --timeout 1m Scripted some basic webpage calls using wget. None of this has generated slow queries. Is there another way of artificially stressing the database to generate problems? I don't have enough skills to write a complex Jmeter or other load generator. I'm hoping perhaps for something built into mysql or another linux trick beyond stress.

  Read the article

• Sendmail smtp-auth issues

  - by SlackO

  I'm running into a problem with Sendmail trying to implement SMTP- auth. I"m running 8.14.5 and have saslauthd running under FreeBSD 7.0-R. I don't believe I have starttls enabled (but I also compiled a version with it and have been testing it too - same problem) - just looking for basic auth, but am wondering if my configuration is not compatible with modern mail clients? I don't think I have any certs set up. It seems an older version of Microsoft Outlook Express works fine with SMTP-auth with no problems, but Outlook 2010 won't work, and neither will Eudora (basic settings to not use encryption and use same uid/pw as pop3 account name) When trying to send mail the server reports: "550 571 Relaying Denied. Proper authentication required." Is there some config that I am missing? Why does it work with Outlook Express but not other e-mail clients? my site.config.m4 has: APPENDDEF(confENVDEF',-DSASL=2') APPENDDEF(conf_sendmail_LIBS',-lsasl2') dnl APPENDDEF(confLIBDIRS',-L/usr/local/lib/sasl2') APPENDDEF(confLIBDIRS',-L/usr/local/lib') APPENDDEF(confINCDIRS',-I/usr/local/include') My sendmail.mc has: define(ConfAUTH_OPTIONS',A') TRUST_AUTH_MECH(LOGIN PLAIN')dnl define(ConfAUTH_MECHANISMS',`LOGIN PLAIN')dnl My /usr/local/lib/sasl2/Sendmail.conf has: pwcheck_method: saslauthd When I restart sendmail this shows up in the logs: Jun 16 12:36:24 x sm-mta[79090]: restarting /usr/sbin/sendmail due to signal Jun 16 12:36:24 x sm-mta[81145]: starting daemon (8.14.5): SMTP+queueing@00:30:00 Jun 16 12:36:24 x sm-mta[81147]: STARTTLS=client, relay=mxgw1.mail.nationalnet.com., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jun 16 12:36:24 x sm-mta[81148]: STARTTLS=client, relay=mxgw1.mail.nationalnet.com., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 testing on the cmd line: telnet localhost 587 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 xxxt ESMTP Sendmail 8.14.5/8.14.5; Fri, 15 Jun 2012 18:28:03 -0500 (CDT) ehlo localhost 250-xxxx Hello localhost [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 250-DSN 250-AUTH GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN 250-DELIVERBY 250 HELP I am not using any certs or ssl right now - just trying to get basic auth to work. Anyone have any ideas?

  Read the article

• WinPE, Startnet.CMD and passing variables to second batch file not working

  - by user140892

  I don't know scripting or PowerShell (yes I need to learn something). I'm not an expert batch file maker either. I have a WinPE flash drive which I used to deploy OS images. I have the WIM, drivers and anything needed else outside the WinPE environment to ensure that Updates, changes are easier for me to make. I use the "STARTNET.CMD" batch file which is part of the WinPE. The reason to go through the letter drives is that the WinPE always gets the X letter drive assigned. The flash drive itself can receive a random letter which always changes. My deployment menu is located on the flash drive it self and not inside the WinPE. This is so that if I need to make a change I don't have to re-do the WinPE. I am able to locate the "menu.bat" batch file and launch it. I use a variable to capture the letter drive. I call the second batch file named "menu.bat" and pass the variable to it. When the second batch file loads, I believe that I am calling the variable correctly. If I break out of the batch file I can echo the variable and see the expected reply. The issue is that I can't use the variable to work with anything on the second batch file. In my test, I can get this to work over and over. When it runs from the real USB flash drive it does not work. I removed comments from the second batch file to make it smaller. My issue is that files below all get a message stating that the system cannot find the path specified. Diskpart Imagex.exe bcdboot.exe Why can't I get the varible to properly function when I try to using example "ImageX.exe"? Contents of the Startnet.cmd @echo off for %%p in (a b c d e f g h i j k l m n o p q r s t u v w x y z) do if exist %%p:\Tools\ set w=%%p Set execpatch=%w%\Tools\ call %w%:\Menu.bat \Tools\ Contents of the Menu.BAT @echo off set SecondPath=%1 cls :Start cls Echo. Echo.============================================================== Echo. Windows 7 64 Bit Ent Basic Desktops Echo.============================================================== Echo. Echo A. 790 Windows 7 - Basic Echo. Echo. Echo I. Exit Echo. Echo. set /p choice=Choose your option = if not '%choice%'=='' set choice=%choice:~0,1% if '%choice%'=='a' goto 790_Windows_7_Basic echo "%choice%" is not a valid (answer/command) echo. goto start :790_Windows_7_Basic REM DISKPART /s %SecondPath%BatchFiles\Make-Partition.txt %SecondPath%imagex.exe /apply %SecondPath%Images\Win7-64b-Ent-Basic-SysPreped.wim 1 o:\ /verify %SecondPath%bcdboot.exe o:\Windows /s S: Copy %SecondPath%Unattended\unattend.XML o:\Windows\System32\sysprep\unattend.XML /y xcopy %SecondPath%Drivers\790\*.* o:\Windows\INF\790\ /E /Q /Y MD o:\Windows\Setup\Scripts\ Copy %SecondPath%BatchFiles\SetupComplete.cmd o:\Windows\Setup\Scripts\ /y Goto Done :Done Exit

  Read the article

• Strip my windows NTFS disk of all ACLs

  - by Alain Pannetier

  When you purchase a windows PC nowadays, you don't actually "own" the whole disk... There are so many ACLs on each folder that there are portions of it you actually can access only through a complex sequence of actions requiring skills well beyond the average PC user. You have to drill down to deeply buried dialog boxes accessible through concealed buttons. You have to understand at which level of the hierarchy you have to take ownership, remove ACLs etc... Yet when you think of it, that's your PC, that's what the "P" of PC originally stand for... So I'm toying with the idea of just stripping the disk of all ACLs I just purchased and leave standard file protections do the basic protection work... Just like previous century Windows used to do... (before I chmod -R 777 ;-) Has anybody done that already and nevertheless survived in reasonably good shape for a reasonable amount of time ? Any technical advice to do that ? Powershell script ? basic script using iCACLS ?

  Read the article

• subversion problem on mac os x

  - by Mohsin Jimmy

  This exists in my httpd.conf file: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn Allow from all #AuthType Basic #AuthName "Subversion repository" #AuthUserFile /Users/iirp/Sites/svn-auth-file #Require valid-user </Location> This is working file When I change this to: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn #Allow from all AuthType Basic AuthName "Subversion repository" AuthUserFile /Users/iirp/Sites/svn-auth-file Require valid-user </Location> and when I access my repository through URL, it gives me the authentication screen but after that screen my svn repository is not showing up correctly. to see message that it gives to me is: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

  Read the article

• Subversion LDAP Configuration

  - by dbyrne

  I am configuring a subversion repository to use basic LDAP authentication. I have an entry in my http.conf file that looks like this: <Location /company/some/location> DAV svn SVNPath /repository/some/location AuthType Basic AuthName LDAP AuthBasicProvider ldap Require valid-user AuthLDAPBindDN "cn=SubversionAdmin,ou=admins,o=company.com" AuthLDAPBindPassword "XXXXXXX" AuthLDAPURL "ldap://company.com/ou=people,o=company.com?personid" </Location> This works fine for living, breathing people who need to log in. However, I also need to provide application accounts access to the repository. These accounts are in a different OU. Do I need to add a whole new <location> element, or can I add a second AuthLDAPURLto the existing entry?

  Read the article

• Cisco: unable to negotiate IP using IPCP with Windows server

  - by lnk

  I am connecting to Windows server using PPP (for vpn), I establish connection but server does not respond me for my address requests: *Mar 23 00:40:06.055: Vi1 MS-CHAP-V2: I CHALLENGE id 0 len 25 from "MSDC" *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using hostname from interface CHAP *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using password from interface CHAP *Mar 23 00:40:06.067: Vi1 MS-CHAP-V2: O RESPONSE id 0 len 69 from "XXX" *Mar 23 00:40:06.087: Vi1 PPP: I pkt type 0xC223, datagramsize 50 link[ppp] *Mar 23 00:40:06.087: Vi1 MS-CHAP-V2: I SUCCESS id 0 len 46 msg is "S=XXX" *Mar 23 00:40:06.087: Vi1 MS CHAP V2 No Password found for : XXX *Mar 23 00:40:06.091: Vi1 MS CHAP V2 Check AuthenticatorResponse Success for : XXX *Mar 23 00:40:06.091: Vi1 IPCP: O CONFREQ [Closed] id 1 len 20 *Mar 23 00:40:06.091: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:06.091: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:07.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up *Mar 23 00:40:07.091: Vi1 LCP: O ECHOREQ [Open] id 1 len 12 magic 0x194CAFCF *Mar 23 00:40:07.103: Vi1 LCP-FS: I ECHOREP [Open] id 1 len 12 magic 0x361B62E5 *Mar 23 00:40:07.103: Vi1 LCP-FS: Received id 1, sent id 1, line up *Mar 23 00:40:08.083: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:08.083: Vi1 IPCP: O CONFREQ [REQsent] id 2 len 20 *Mar 23 00:40:08.083: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:08.083: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:10.099: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:10.099: Vi1 IPCP: O CONFREQ [REQsent] id 3 len 20 *Mar 23 00:40:10.099: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:10.099: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.115: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:12.115: Vi1 IPCP: O CONFREQ [REQsent] id 4 len 20 *Mar 23 00:40:12.115: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:12.115: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.211: Vi1 LCP: O ECHOREQ [Open] id 2 len 12 magic 0x194CAFCF *Mar 23 00:40:12.219: Vi1 LCP-FS: I ECHOREP [Open] id 2 len 12 magic 0x361B62E5 *Mar 23 00:40:12.219: Vi1 LCP-FS: Received id 2, sent id 2, line up *Mar 23 00:40:14.131: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:14.131: Vi1 IPCP: O CONFREQ [REQsent] id 5 len 20 *Mar 23 00:40:14.131: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:14.131: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:16.147: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:16.147: Vi1 IPCP: O CONFREQ [REQsent] id 6 len 20 *Mar 23 00:40:16.147: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:16.147: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:17.331: Vi1 LCP: O ECHOREQ [Open] id 3 len 12 magic 0x194CAFCF *Mar 23 00:40:17.343: Vi1 LCP-FS: I ECHOREP [Open] id 3 len 12 magic 0x361B62E5 *Mar 23 00:40:17.343: Vi1 LCP-FS: Received id 3, sent id 3, line up You see: My router asks for address, but only keepalives are on line. But the same server works with windows client!! ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service internal ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ! ! ip cef vpdn enable ! vpdn-group pptp request-dialin protocol pptp pool-member 1 initiate-to ip XXXX ! ! ! ! ! ! ! bridge irb ! ! interface ATM0 no ip address shutdown no atm ilmi-keepalive dsl operating-mode auto ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Dot11Radio0 no ip address shutdown speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Vlan1 no ip address bridge-group 1 ! interface Dialer0 ip address negotiated encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer string XXX dialer persistent dialer vpdn dialer-group 1 keepalive 5 3 no cdp enable ppp authentication ms-chap-v2 optional ppp eap refuse ppp chap hostname XXX ppp chap password 0 XXX ppp ipcp mask request ppp ipcp ignore-map ppp ipcp address accept ! interface BVI1 mac-address XXX.XXX.XXX ip address dhcp ! ip classless ip route 172.0.0.0 255.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! dialer-list 1 protocol ip permit ! control-plane ! bridge 1 protocol vlan-bridge bridge 1 route ip ! line con 0 no modem enable line aux 0 line vty 0 4 login ! scheduler max-task-time 5000 end

  Read the article

• What are the differences between Windows 7 versions?

  - by Click Ok

  There are the following versions of Windows 7: Windows 7 Starter Windows 7 Home Basic Windows 7 Home Premium Windows 7 Professional Windows 7 Ultimate I know about the following restrictions: Starter is missing Aero and restricts wallpaper changing. Home Basic restricts some Aero Features. Can someone specify any other differences? Are there any ways to circumvent the restrictions? If so, are they legal? Additionally, I would like to know about .NET development in general. What is the minimum version required to develop using ASP.NET?

  Read the article

• Message Date/Time tag in Lotus Notes

  - by TeeKay

  I've noticed that within Notes (8.5.2, basic client, fat client and iNotes) the date/time displayed on the eMail envelope AND the date/time on the message header is the same and appearently that time that Domino received the message. When using BES, the message forwarded to the BlackBerry by Domino/BES has the RECEIVED date/time on the envelope and the SENT date/time displayed in the message. In the basic/fat client with properties the sent time is viewable in one of the "Received" tags. Having the sent time easily viewable is helpful, especially if your trying to trouble-shoot a problem. Is this a configuration feature? Is it selectable in the client or in Domino? Thx

  Read the article

• Solution to Manage and Monitor (Ubuntu) Machines

  - by Elmar Weber

  I'm looking for a tool like Canonical (system management and monitoring for Ubuntu) that is Open Source and free. The goal is to manage a dozen or so KVM machines for private testing purposes. I know of puppet and munin or RHQ as separate tools to manage and monitor, but I'd prefer something integrated. Any tips? Basic requirements would be: system package management and update (individual selection for each managed node) configuration of basic system services (Users, NFS, cron, ideally also Apache) monitoring (charting of system resources, disk, io, memory, etc) and alerting, ideally a default configuration with sensible values for alerts

  Read the article

• Overriding Apache auth directive

  - by Machine

  Hi! I'm trying to allow public access to a method that generates a WSDL-file for our API. The rest of the site is behind basic auth protection. Can you guys take a look at the following virtual-host configuration and see why the override does not take place? <VirtualHost *:80> ServerName xyz.mydomain.com DocumentRoot /var/www/dev/public <Directory /var/www/dev/public> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all SetEnv APPLICATION_ENV testing </Directory> <Location /> AuthName "XYZ Development Server" AuthType Basic AuthUserFile /etc/apache2/xyz.passwd Require valid-user </Location> <Location /api/soap/wsdl> Satisfy Any allow from all </Location> </VirtualHost>

  Read the article

• Missing menu items for Azure SQL tables within SQL Server Management Studio?

  - by Sid

  I have a table (say Table1) that is replicated via SQL Data Sync Agent across a local SQL Server 2012 as well as an Azure SQL Server (part of Microsoft Azure). Everything about Table1 (schema, table values etc ) is identical to the best of my understanding. However, when I list and right click Table1 from Microsoft SQL Server Management Studio 2012 (SSMS), I get some very different menu options, even for seemingly basic stuff. Lets focus only on the 'Design' menu item: It is visible for Table1 on the local SQL server in SSMS It is missing for Table1 on Azure SQL via SSMS It is visible for Table1 (as Open Table Definition) on Azure SQL when reaching it via Visual Studio 2012 (Server Explorer - Data connections) This is seen in the screenshots below: Now I use scripts from some real stuff (esp when I need to check in the SQL scripts etc) but this difference concerns me to some extent. Am I witnessing just a tools artifact in SQL Server Management Studio when connecting to Azure SQL? or is it something more serious about limitations of Azure SQL itself (although, just seeing the Design surface is so basic!)?

  Read the article

• Is there a way to automate testing for a GNS3 network topology?

  - by Chedy2149

  I'm working on an MPLS backbone topology using GNS3, this topology includes configuration of several networking technologies such as IPv6, BGP, OSPF, IPv6 to IPv4 dynamic tunneling, MPLS based VPNs, MPLS based traffic engineering... So I'm a beginner with basic knowledge in networking (Ipv4 addressing, basic routing and switching) and I can't just easly test if my topology works or not, moreover fiddling with configuration I've noticed that sometimes when getting MPLS config right and missing BGP config all my topology is messed up. Given that I use Cisco 7200 series routers, is there any way to build a test harness for my topology in order to guarentee correctness with a single push button automated process?

  Read the article

• How can I redirect URLs using the proxy module in Apache?

  - by LearningIT

  This seems like a super-basic question but I am having a hard time tracking down a straightforward solution, so appreciate any help and patience with me on this: I want to configure my Apache proxy server to redirect certain URLs so that, for example, a web browser HTTP request for www.olddomain.com gets passed to the proxy server which then routes the request to www.newdomain.com which sends a response to the proxy server which then passes it back to the web browser. Seems so simple, yet I don't see how to achieve this on Apache. I know Squid/Squirm offer this functionality so am guessing I am missing something really basic. I know I can use RewriteRule to dynamically modify the URL and pass it to the proxy server, but I effectively want to do the reverse, whereby the proxy server receives the original URL, applies the RewriteRule, and then forwards the HTTP request to the new URL. Hope that makes sense. Thanks in advance for any help.

  Read the article

• What is an RSS feed? Why would I use one?

  - by Dan Esparza

  Pretty basic question about internet technology: What is an RSS feed? Why would I use one?

  Read the article

• DD-WRT with both https and sshd running in port 443

  - by Bruno

  I have a buffalo router with dd-wrt v24 SP2. After setting up the basic stuff, I enabled the https access to the admin page. Several days later, while setting up remote ssh, I changed the default port from 22 to 443. And now..well :) You got the picture :) I can ssh the router but I have no web access to it's admin page. Before rushing to a cold-hearted configuration reset, is there any way to change the ssh port from a shell? Or make dd-wrt accessible thru basic http?

  Read the article

• Office features disabled in standalone Outlook

  - by Jared275

  I have Office 2007 basic suite installed on my computer. I installed Outlook 2010 from a volume license provided by our Email Server Provider. When creating a new email all of the Office features are disabled in the ribbon. This microsoft support article describes my issue, however I do not have Office installed as click and run. It seems to me that there should be a way to make outlook recognize the office suite already installed. The "add or remove features" dialogue accessed through programs and features from the control panel seems promising, however its only options for "office features" are run from computer, or install on 1st run. I can't seem to find any valid articles online that aren't just dealing with the click to run issue. I know that there are several people at my company with the same set up, installed the same way that have everything working fine. How can I get my standalone Outlook 2010 install to recognize the Office 2007 basic suite?

  Read the article

• How to re-arrange Excel database from 1 long row, into 3 short rows and automatically repeat the process?

  - by user326884

  I would appreciate help on the above-mentioned topic. I am unfamiliar with Visual Basic for Excel, so will need step-by-step guidance (if solution is via Visual Basic). For example :- Row 1, Sheet A: A1 B1 C1 D1 E1 F1 G1 H1 I1 To be re-arranged into Sheet B : Row 1 : A1, B1, C1 Row 2 : D1, E1, F1 Row 3 : G1, H1, I1 The Sheet A (database sheet) has a lot of rows (example 3,000 rows), hence the Sheet B is estimated to have 9,000 rows (i.e. 3 x 3,000). Thanking you in anticipation of your speedy response.

  Read the article

• How can I prevent Apache from exposing a user's password?

  - by Marius Marais

  When using basic authentication (specifically via LDAP, but htpasswd also) with Apache, it makes the REMOTE_USER variable available to the PHP / Ruby / Python code underneath -- this is very useful for offloading authentication to the webserver. In our office environment we have lots of internal applications working like this over SSL, all quite secure. BUT: Apache exposes the PHP_AUTH_USER (=REMOTE_USER) and PHP_AUTH_PW variables to any application inside PHP. (PHP_AUTH_PW contains the plaintext password the user entered.) This means it's possible for the app to harvest usernames and passwords. Presumably the same information is available to Python and Ruby (all three are currently in use; PHP is being phased out). So how can I prevent Apache from doing this? One idea is to use Kerberos Negotiate authentication (which does not expose the password and has the benefit of being SSO), but that automatically falls back to Basic for some browsers (Chrome and in some cases Firefox), causing the password to be exposed again.

  Read the article

• Fresher in Linux administration [closed]

  - by user127452

  i am fresher in the administration field & i just got the job as a linux support executive,though i have basic knowledge of linux .. the server handling,configuring & network related issues are a new part for me.So i am confuse for where to start with the basic requirement that linux admin should know & how to & from where to study about it .. we hav a 6 working days for +9 hours each ..so it is not possible to join any RHCE course or classes .. so please help me regarding to this issue as the there was no proper handoff is done from previous employer ... & now there is a lot work pressure on me ... so please suggest me something ... :)

  Read the article

• How to access internal network covered by a squid proxy from internet?

  - by Forbidden Overseer

  Our campus uses a squid proxy caching server with a basic authentication for all outbound requests coming from internal network. The whole network uses private IP range from 172.16.0.0 to 172.31.255.255. Most of our faculty websites and library websites are hosted on LAN. I want to access those faculty websites and other internal websites when I am outside the proxy (say when I am at my home and not in campus). I don't know whether I can use the same basic authentication from outside to access those LAN websites. Is there a way I can do that? I don't know whether our proxy server allows it or not, but if that's possible - I want to know how (how to set up browser etc.)?

  Read the article

• subversion issue on mac os x

  - by user32942

  This exists in my httpd.conf file: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn Allow from all #AuthType Basic #AuthName "Subversion repository" #AuthUserFile /Users/iirp/Sites/svn-auth-file #Require valid-user </Location> This is working file When I change this to: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn #Allow from all AuthType Basic AuthName "Subversion repository" AuthUserFile /Users/iirp/Sites/svn-auth-file Require valid-user </Location> and when I access my repository through URL, it gives me the authentication screen but after that screen my svn repository is not showing up correctly. to see message that it gives to me is: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >