Search Results

Search found 18596 results on 744 pages for 'c how to detect all ip addresses from a lan'.

Page 61/744 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• How a router decides destination of packet?

  - by user58859

  I have basic networking question. Scenario : Two pc's are communicating on a wan. Both the pc's ate behind routers or modems. My question : Both the pc's have public IP of each other. That public IP is most of the time is either of the router or of the modem. There can be more then one pc's behind those routers and modems. Then how the pc's are communicating. I can understand the packets can reach upto those routers or modems. But what after that. In the packet , destination IP is public IP. Then how the router or modem decides where to send the packet? Can anybody explain me this please. Thanks in advance.

  Read the article

• Unidentified network: How to configure TCP/IPv4 for Win7?

  - by Zolomon

  When I try to connect to internet I keep getting the error "Unidentified network". I've tried numerous attempts at restoring access without success. IP release, flushing DNS cache, reinstalling NIC, reactivating NIC, resetting router and so on... I've read several times that it's my default gateway that's wrong. Currently I've had automatic IP/DNS configuration set without any problems, and then it stopped working for some reason. Anyone know how I specify the IP? My subnetmask is 255.255.255.0, default gateway is 192.168.0.1 but I have no idea how to determine what IP I should set. I use a D-Link DIR-655 and other computers on the network have IPs like 192.168.0.194, next is 192.168.0.197. (I'm completely lost and am trying to cool down after two weekends of debugging filled with despair.)

  Read the article

• Google Buys Global IP Solutions for $68M, Eying Voice Communications

  Search giant continues its acquisition blitz with the purchase of Global IP Solutions, a Norwegian firm specializing in technology to improve reliability of real-time audio and video.

  Read the article

• Windows 7 RDP Problem - connecting to external zone with computer names

  - by alex

  I recently installed Windows 7, all is well so far, apart from using RDP to access computers outside my domain. We use a datacenter, outside of our domain. I was using Windows Vista before (not sure if this is relevant) - I could RDP no problem to the machines (using their machine names - Web10 for example) I have changed my IP address to be the same as it was when i was using vista We use a draytek firewall - we use DMZ Host to map my IP to an external ip- which is allowed to access the datacenter I've disabled windows firewall When i try to connect in Remote Desktop client, using Web10, I can't connect, however, if I enter the actual IP address, i can. I have run out of ideas... any help is appreciated!

  Read the article

• Why Can't Computers Off My Network See the Site? [migrated]

  - by nmagerko

  Have just set up Apache, PHP, MySQL, etc. on my Ubuntu OS, and I was wondering why computers that are not on my network can not see the basic index.html that Apache uses as the default. I set up the static ip address for my computer, and I use 192.168.1.100 for computers to view the simple site. Is there something I am missing that will allow others to access my site? (It is REALLY simple; no graphics, CSS, etc.)

  Read the article

• Unable to detect windows hard drive while running Ubuntu 12.04 from USB

  - by eapen jacob

  I am completely new to Ubuntu. I experimented with Ubuntu 12.04 by running it from a USB drive, in-order to recover files from my hard disc. History: My laptop is an IBM R60 running windows 7. Suddenly it gave me an error stating "error 2100 - Hard drive initialization error". I have read all the forums and most of them suggested that I remove and replace my HDD and that did not work. And one site suggested to try using Ubuntu to recover files. I booted my system from USB, and once Ubuntu came up, I choose "Try Ubuntu". It came up fine and I was able to surf ,and do other things, etc. I was unable to to access my files which are on the hard disc and "Attached Devices" is grayed out. 1- Is there any way to gain access to my hard disc to recover the files? How do I navigate to search for my files. 2- Is it just simply not possible if the hard disc themselves are not working? Is that why I`m unable to find the drives. I know its a very novice question, but hoping someone would help me out. Thank you, Eapen

  Read the article

• Crash when trying to detect touch

  - by iQue

  I've got a character in a 2D game using surfaceView that I want to be able to move using a button (eventually a joystick), but my game crashes as soon as I try to move my sprite. This is my onTouch-method for my steering button: public void handleActionDown(int eventX, int eventY) { if (eventX >= (x - bitmap.getWidth() / 2) && (eventX <= (x + bitmap.getWidth()/2))) { if (eventY >= (y - bitmap.getHeight() / 2) && (y <= (y + bitmap.getHeight() / 2))) { setTouched(true); } else { setTouched(false); } } else { setTouched(false); } And if I try to put this in my update-method: public void update() { x += (speed.getXv() * speed.getxDirection()); y += (speed.getYv() * speed.getyDirection()); } The sprite moves on its own just fine, but as soon as I add: public void update() { if(steering.isTouched()){ x += (speed.getXv() * speed.getxDirection()); y += (speed.getYv() * speed.getyDirection()); } the game crashes. Does anyone know why this is or how to fix it? I cannot figure it out. I'm using MotionEvent.ACTION_DOWN to check if the user if pressing the screen.

  Read the article

• Two routers network routing settings

  - by xiamx

  I have two routers, Router A is connected to the internet, and Router B is connected to the LAN port of Router A. Router A: 192.168.1.1 Subnet 255.255.255.0 Router B: IP leased from router A: 192.168.1.2 gateway 192.168.0.1 subnet 255.255.255.0 I have a machine C plugged to router A with ip 192.168.1.3 also a machine D plugged to router B with ip 192.168.0.199 I want to access machine D from a machine C. What settings do I need to change to do that?

  Read the article

• Ubuntu 12.04 wireless does not detect networks

  - by dudeitsdevin90

  I installed Ubuntu on a partition of my MacBook Pro. Wireless connections work fine when I switch to OSX, but the wireless networks are not even detected when I boot Ubuntu. I installed Wicd as a new network manager, but I'm still having the same problem. Ubuntu works on a wired connection though. I have searched the web for a solution... similar questions have been asked but I have not been able to find a way to fix this problem. Any help would be greatly appreciated.

  Read the article

• Routing / binding 128 to one server

  - by Andrew

  I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Thank you

  Read the article

• Why doesn't Ubuntu detect my second hard drive?

  - by user93179

  I am new to Linux and to Ubuntu, I was wondering, I have two hard drives setup in SATA ports (non-raid, at least I don't think they are). I installed ubuntu unto the drives fresh without any previous versions or windows at all. However when I got the Ubuntu 12.04 LTS working, all I see is 1 x 120 gigabyte harddrive. Also, not sure if this is important or not, my hard drives are SSD. My computer specs are Asus P9Z77-V-LK Nvidia Geforce GTX 660 TI Intel i5 3570k 3.4 /proc/partitions shows: major minor #blocks name 8 0 117220824 sda 8 1 117219328 sda1 8 16 117220824 sdb 8 17 96256 sdb1 8 18 108780544 sdb2 8 19 8342528 sdb3 11 0 1048575 sr0 and ls -l /sys/block/ | grep -v /virtual/: lrwxrwxrwx 1 root root 0 Sep 27 17:26 sda - ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda lrwxrwxrwx 1 root root 0 Sep 27 17:26 sdb - ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb lrwxrwxrwx 1 root root 0 Sep 27 22:26 sdc - ../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/host6/target6:0:0/6:0:0:0/block/sdc lrwxrwxrwx 1 root root 0 Sep 27 22:04 sr0 - ../devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sr0 sudo file -s /dev/sd*: /dev/sda: x86 boot sector; partition 1: ID=0x7, starthead 32, startsector 2048, 234438656 sectors, code offset 0xc0, OEM-ID " ?", Bytes/sector 190, sectors/cluster 124, reserved sectors 191, FATs 6, root entries 185, sectors 64514 (volumes 32 MB) , physical drive 0x7e, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled /dev/sdb2: Linux rev 1.0 ext4 filesystem data, UUID=387761ac-5eba-4d0f-93ba-746a82fb541d (needs journal recovery) (extents) (large files) (huge files) /dev/sdb3: data /dev/sdc: x86 boot sector; partition 1: ID=0xc, active, starthead 0, startsector 8064, 30473088 sectors, code offset 0xc0 /dev/sdc1: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 64, reserved sectors 944, Media descriptor 0xf8, heads 128, hidden sectors 8064, sectors 30473088 (volumes 32 MB) , FAT (32 bit), sectors/FAT 3720, Backup boot sector 8, serial number 0xf90c12e9, label: "KINGSTON " /dev/sda1: x86 boot sector, code offset 0x52, OEM-ID "NTFS ", sectors/cluster 8, reserved sectors 0, Media descriptor 0xf8, heads 255, hidden sectors 2048, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled Any help would be greatly appreciated! Thanks Another thing I noticed is, when i use gparted to locate my drives, it seems that sda1 is my second drive that I am not detecting when I boot up and my ubuntu + FAT Boot files are installed in sdb1

  Read the article

• Blocking Users by IP

  SQL Server MVP Brian Kelley brings us a great new article that solves a problem that might help your security. In this short piece, we learn how we can use logon triggers to block users based on their IP address. New! SQL Monitor HostedStart monitoring your SQL Servers in under 5 minutes. Get clear insights into server performance, whilst we manage the monitoring software. Find out more.

  Read the article

• How can I tell if a host is bridged and acting as a router

  - by makerofthings7

  I would like to scan my DMZ for hosts that are bridged between subnets and have routing enabled. Since I have everything from VMWare servers, to load balancers on the DMZ I'm unsure if every host is configured correctly. What IP, ICMP, or SNMP (etc) tricks can I use to poll the hosts and determine if the host is acting as a router? I'm assuming this test would presume I know the target IP, but in a large network with many subnets, I'd have to test many different combinations of networks and see if I get success. Here is one example (ping): For each IP in the DMZ, arp for the host MAC Send a ICMP reply message to that host directed at an online host on each subnet I think that there is a more optimal way to get the information, namely from within ICMP/IP itself, but I'm not sure what low level bits to look for. I would also be interested if it's possible to determine the "router" status without knowing the subnets that the host may be connected to. This would be useful to know when improving our security posture.

  Read the article

• Squid 2.7.6 not honoring ACL rules

  - by peppery

  Hello there, I have a /24 block of IP addresses assigned to a single server that I have been attempting to install Squid on an Ubuntu server machine. All of the IP addresses are set up correctly (aliases of eth0) in /etc/networking and work as they should be, using cURL I can specify an interface and it goes out on the correct address as it should be. I would like Squid to take the incoming IP address the request was sourced to and proxy the request out on the same IP (e.g incoming 123.123.123.1:3128 - 123.123.123.1, .2 - .2, etc) and have set up these ACL rules in /etc/squid.conf acl ip1 myip x.x.x.1 tcp_outgoing_address x.x.x.1 ip1 acl ip2 myip x.x.x.2 tcp_outgoing_address x.x.x.2 ip2 acl ip3 myip x.x.x.3 tcp_outgoing_address x.x.x.3 ip3 and so on, as this seems to be the only way to do what I want (from research). However, after much frustration, Squid seems to be ignoring these rules and sending requests out on the default interface. Does anybody have any suggestions? Thanks.

  Read the article

• Detect rotated rectangle collision

  - by handyface

  I'm trying to implement a script that detects whether two rotated rectangles collide for my game. I used the method explained in the following article for my implementation in Google Dart. 2D Rotated Rectangle Collision I tried to implement this code into my game. Basically from what I understood was that I have two rectangles, these two rectangles can produce four axis (two per rectangle) by subtracting adjacent corner coordinates. Then all the corners from both rectangles need to be projected onto each axis, then multiplying the coordinates of the projection by the axis coordinates (point.x*axis.x+point.y*axis.y) to make a scalar value and checking whether the range of both the rectangle's projections overlap. When all the axis have overlapping projections, there's a collision. First of all, I'm wondering whether my comprehension about this algorithm is correct. If so I'd like to get some pointers in where my implementation (written in Dart, which is very readable for people comfortable with C-syntax) goes wrong. Thanks!

  Read the article

• It is okay to set MASQUERADE at 2 network interfaces in a Linux server?

  - by Patrick L

  There is a Linux server with 3 network interfaces, eth0, eth1, eth2. IP forwarding has been turn on in this server. eth0 is connected to 10.0.1.0/24. Its IP is 10.0.1.1. eth1 is connected to 172.16.1.0/24. Its IP is 172.16.1.1. Server A can ping router C at 172.16.1.2. eth2 is connected to 192.168.1.0/24. Its IP is 192.168.1.1. Server A can ping server B at 192.168.1.2. Router C is able to route to 172.16.2.0/24 and 172.16.3.0/24. [10.0.1.0/24] | 172.16.2.0/24------| | [C]------172.16.1.0/24------[A]------192.168.1.0/24------[B] 172.16.3.0/24------| We have set MASQUERADE at eth0. When server B (192.168.1.2) connect to 10.0.1.0/24, IP MASQUERADE will happen at eth0. Can we set MASQUERADE at eth1? Is it okay to set MASQUERADE at more than 1 network interfaces in Linux?

  Read the article

• How to make your apache application accessible within network

  - by guest

  I have a Windows XP machine where I have installed WAMP and made a PHP based web application. I can access the web application from within this machine by using the browser and pointing to: http://localhost/myApp/ --- and the page loads fine. Now I want this site (http://localhost/myApp) to be accessible to all machines within the network (and may be later, to the general public as well). I am quite new to this, how do I make my site accessible to all machines within the network and to the general public in the internet? I tried modifying the httpd.conf file in Apache (WAMP) by changing Listen 80 to Listen 10.10.10.10:80 (where I replaced 10.10.10.10 with the actual IP of this windows xp machine). I also tried "Put Online" feature in WAMP. None seem to work though. How do I make it accessible?

  Read the article

• Connecting two IPs like an URL

  - by czesuaf

  I haven't found answer anywhere, so here comes the question. My ISP connected me to a router with thousands of other clients, so my public IP is the same as many others. And I want to make a small private server which can be accessible across whole web. So my home router shows me IP 10.x.x.x and actually my public IP is 89.x.x.x. Is there any way to reach the IP 10.x.x.x from the Internet? Yeah I thought the same about IPv6 but it's still not accessible for me ;[

  Read the article

• How does communication between 2 computers in a single network happen?

  - by learner

  Lets say I and my friend connect our computers with a LAN cable. I ping my friend with his IP address. How does it work? Since we are in the same network, we don't even need IP addresses, do we? Isn't IP addressing only relevant in case of inter-network communication? What will the ping command do with his IP address? How will it eventually find his physical address (NIC address)? (no ARP here, because that would involve a router at the edge of the network, which doesn't apply here). Am I wrong somewhere?

  Read the article

• How to Use C Class IP Address Range

  Another very important thing that you have to remember is that your site should be able to feature in the very first page of a search engine or else it is of no use. This is how you can use C Class IP address Ranges.

  Read the article

• Windows 7 intermittently drops wired internet/lan connection.

  - by CraigTP

  In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

  Read the article

• Bridging Virtual Networking into Real LAN on a OpenNebula Cluster

  - by user101012

  I'm running Open Nebula with 1 Cluster Controller and 3 Nodes. I registered the nodes at the front-end controller and I can start an Ubuntu virtual machine on one of the nodes. However from my network I cannot ping the virtual machine. I am not quite sure if I have set up the virtual machine correctly. The Nodes all have a br0 interfaces which is bridged with eth0. The IP Address is in the 192.168.1.x range. The Template file I used for the vmnet is: NAME = "VM LAN" TYPE = RANGED BRIDGE = br0 # Replace br0 with the bridge interface from the cluster nodes NETWORK_ADDRESS = 192.168.1.128 # Replace with corresponding IP address NETWORK_SIZE = 126 NETMASK = 255.255.255.0 GATEWAY = 192.168.1.1 NS = 192.168.1.1 However, I cannot reach any of the virtual machines even though sunstone says that the virtual machine is running and onevm list also states that the vm is running. It might be helpful to know that we are using KVM as a hypervisor and I am not quite sure if the virbr0 interface which was automatically created when installing KVM might be a problem.

  Read the article

• Improving Performance of RDP Over LAN

  - by Jared Brown

  Architecture: A deployment of 6 new HP thin clients (Windows XP Embedded) with TCP/IP access to several new HP servers (Windows 2003 Server). Each thin client is connected over fiber optic to a Gigabit Cisco switch, which the servers are connected to. There are 10/100 Ethernet to fiber converter boxes on each end of the fiber cables. Problem: Noticeable lag over RDP while using the Unigraphics CAD package. 3D models take .5 to 1 second to respond to mouse actions. Other Details: Network throughput on each thin client's RDP session is 7288 kbps. RDP connection settings - color setting: 15k, all themes, etc. turned off. Local and remote system performance stats are well within norms (CPU, Memory, and Network). Question: Are there newer versions of terminal services or RDP I can use on my existing OSes? Are there compression algorithms, etc. that are well suited for a high-bandwidth LAN? Are there valid alternatives that will yield higher performance (i.e. UltraVNC with drivers installed)? Are there TCP/IP tuning options I can exploit?

  Read the article

• Default route not on LAN

  - by jarmund

  I have a network that in principle looks like this: H1---\ /----Inet1 H2---->---GW1---< H3---/ \----GW2-----Inet2 H1 and H2 = Hosts that need access to internet with GW1 Inet1 = Internet link over 3G connection Inet2 = 5GHz link to Internet (not always up) GW1 = Works as a router, automatically picking the "best" connection between Inet1 and Inet2 (the latter via GW2). GW2 = 5GHz wifi router And here's the problem: H3 only needs internet access when Inet2 is up. What i was thinking of doing was a routing table that looks like this: route to GW2 via GW1 default route is via GW2 I first set the route to GW2 via GW1 without a problem. But when i try route add default gw 1.2.3.4 (1.2.3.4 being the IP of GW2), it complains "SIOCADDRT: No such device" Is the problem that the default gw i'm trying to set is not reachable directly? Is there a different approach that would allow me to achieve this? An alternative (and hypothetical) approach: Since H3 will be using a static IP, is it possible to do some magic with iptables on GW1 to forward any packets from H3 to GW3, thereby "tricking" H3 into using GW2 as its default router?

  Read the article

• pfSense Load Balancer and Virtual IP

  - by jshin47

  I have two identical web servers on 10.2.1.13 and 10.2.1.113. I would like to set up pfSense load balancer to balance requests to both of these. I set up pools that included HTTP and HTTPS for both of these hosts, then set up virtual servers that responded on HTTP and HTTPS and referred traffic to its respective pool. However, I set up the virtual server to listen on 10.2.1.213, a LAN IP rather than a WAN IP, because I want LAN traffic to be able use the load balancer virtual server as well. So, I set up a Virtual IP for 10.2.1.213 on LAN IP, and a NAT port forwarding rule for HTTP and HTTPS traffic on a WAN IP to forward to 10.2.1.213. It seems like this should work, but it fails. What eventually happens is that when I try to access the page from WAN, I am directed to the login page for my pfSense device rather than the page I am expecting. When I try to access 10.2.1.213 from LAN, the request times out. What is going wrong here? I have tried it with and without NAT reflection to no avail. Please advise

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >