Search Results

Search found 2253 results on 91 pages for 'grep'.

Page 61/91 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Need help installing the Intel VGA Driver [closed]

  - by Ary Catur Wicaksono

  Possible Duplicate: How do I install the Intel Graphics driver in my system? how to install intel VGA drive..?? I've been searching on google but did not see too I've been trying to ask the ubuntu forum in Indonesia. but they did not reply my post.. is there anything that can help me? *I am sorry my English is rather chaotic arthur@Chunx:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) arthur@Chunx:~$ sudo lshw -c display [sudo] password for arthur: *-display description: VGA compatible controller product: 82G33/G31 Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 10 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff arthur@Chunx:~$ sudo apt-get install xserver-xorg-video-intel Sedang membaca daftar paket... Selesai Membangun pohon ketergantungan Membaca informasi yang tersedia... Selesai xserver-xorg-video-intel telah berada dalam versi terbaru. 0 dimutakhirkan, 0 baru terinstal, 0 akan dihapus dan 190 tidak akan dimutakhirkan.

  Read the article

• Correct nvidia+intel graphics setup in 14.04

  - by Espressofa

  Just upgraded to 14.04 to try to fix some other issues. Now, something has gone wrong with my graphics. I have a Thinkpad T530 with Intel and Nvidia graphics cards. $ inxi -SGx System: Host: xyz Kernel: 3.13.0-24-generic x86_64 (64 bit, gcc: 4.8.2) Desktop: N/A Distro: Ubuntu 14.04 trusty Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0 Card-2: NVIDIA GF108M [NVS 5400M] bus-ID: 01:00.0 X.Org: 1.15.1 drivers: fbdev,vesa,intel,nouveau (unloaded: nvidia) Resolution: [email protected] GLX Renderer: N/A GLX Version: N/A Direct Rendering: N/A $ glxinfo name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". I'm not sure what I did but now something is wrong with my graphics, as should be visible from the above commands. nvidia-detector says "none" as well. I used to have bumblebee but then some website said to remove it and now something's clearly wrong. What's the right way to set things up? Should I try to add bumblebee back? Here's what's installed now: $ dpkg --get-selections | grep nvidia nvidia-319 install nvidia-331 install nvidia-libopencl1-331 install nvidia-opencl-icd-331 install nvidia-prime install nvidia-settings install nvidia-settings-319 install

  Read the article

• Cron is running but not outputting data

  - by Youri

  I'm trying to make my Amazon EC2 instances stop and start by a crontab. EC2 Api tools is succesfully installed. Manually it works. The cron (which I put in with the command crontab -e): 10 * * * * ubuntu /usr/bin/ec2-stop-instances [instanceid] /tmp/ec2.log The file /tmp/ec2.log is created. When I use the command grep CRON /var/log/syslog I see the cron has actually run. I don't get any output in the /tmp/ec2.log file though. I have set all the amazon variables needed. Even if I on purpose create a wrong cron, like this: 10 * * * * ubuntu /usr/bin/ec2-stop-instancwweqes [instanceid] /tmp/ec2.log I get no output in the file. Shouldn't there be an error? I also tried not defining the user: 10 * * * * /usr/bin/ec2-stop-instances [instanceid] /tmp/ec2.log And direct command: 10 * * * * ubuntu ec2-stop-instances [instanceid] /tmp/ec2.log Can someone please help me. If I can somehow debug, I can get to the solution. Thanks in advance.

  Read the article

• Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

  - by Schof

  This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

  Read the article

• Ubuntu 13.10 No Sound

  - by spiersie

  I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

  Read the article

• Transmission shutdown script for multiple torrents?

  - by Khurshid Alam

  I have written a shutdown script for transmission. Transmission calls the script after a torrent download finishes. The script runs perfectly on my machine (Ubuntu 11.04 & 12.04). #!/bin/bash sleep 300s # default display on current host DISPLAY=:0.0 # find out if monitor is on. Default timeout can be configured from screensaver/Power configuration. STATUS=`xset -display $DISPLAY -q | grep 'Monitor'` echo $STATUS if [ "$STATUS" == " Monitor is On" ] ### Then check if its still downloading a torrent. Couldn't figure out how.(May be) by monitoring network downstream activity? then notify-send "Downloads Complete" "Exiting transmisssion now" pkill transmission else notify-send "Downloads Complete" "Shutting Down Computer" dbus-send --session --type=method_call --print-reply --dest=org.gnome.SessionManager /org/gnome/SessionManager org.gnome.SessionManager.RequestShutdown fi exit 0 The problem is that when I'm downloading more than one file, when the first one finishes, transmission executes the script. I would like to do that but after all downloads are completed. I want to put a 2nd check ( right after monitor check) if it is still downloading another torrent. Is there any way to do this?

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• Frequent disconnects using wlan AR9285

  - by John Neil

  I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

  Read the article

• How can I use a script to control a VirtualBox guest?

  - by TheWickerman666

  Refer to : Launch an application in Windows from the Ubuntu desktop I was wondering if Takkat could elaborate on the actual execution i.e. howto in the script file. This will be greatly helpful. Thanks in advance my script file InternetExplorerVM.sh looks like this, execution is /path/to/InternetExplorerVM.sh "C:\Program Files\Internet Explorer\iexplore.exe" #!/bin/bash # start Internet Explorer inside of a Windows7 Ultimate VM echo "Starting 'Internet Explorer' browser inside Windows7 virtual machine" echo "" sleep 1 echo "Please be patient" VBoxManage startvm b307622e-6b5e-4e47-a427-84760cf2312b sleep 15 echo "" echo "Now starting 'Internet Explorer'" ##VBoxManage --nologo guestcontrol b307622e-6b5e-4e47-a427-84760cf2312b execute --image "$1" --username RailroadGuest --password bnsf1234 VBoxManage --nologo guestcontrol b307622e-6b5e-4e47-a427-84760cf2312b execute --image "C:\\Program/ Files\\Internet/ Explorer\\iexplore.exe" --username RailroadGuest --password bnsf1234 --wait-exit --wait-stdout echo "" echo "Saving the VM's state now" VBoxManage controlvm b307622e-6b5e-4e47-a427-84760cf2312b savestate sleep 2 #Check VM state echo "" echo "Check the VM state" VBoxManage showvminfo b307622e-6b5e-4e47-a427-84760cf2312b | grep State exit My apologies for any mistakes, this is my first time posting on askubuntu.Thanks a ton in advance. This has been very helpful. Need this for BNSF guests, their Mainframe emulator works exclusively on Java enabled Internet Explorer.

  Read the article

• No Wireless In Ubuntu 13.10

  - by viktorhubinette

  When I upgraded to Ubuntu 13.10, I can't connect to wireless. The only thing I can connect to is ethernet, so please help me, What should I do? Here is the output of the lspci -nnk | grep -i net -A2 00:19.0 ethernet controller [0200]:intel corporation 82579V Gigabit network connection [8086:1503] (rev 04) subsystem: acer incorporated [ALI Device] [1025:8000] Kernel driver in use : e100e output of lsusb: Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:0152 Realtek Semiconductor Corp. Mass Storage Device Bus 001 Device 040: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 003 Device 003: ID 045e:070f Microsoft Corp. Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

• Unable to mount USBDRIVE Error creating moint point: Permission denied

  - by steve

  Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

  Read the article

• Impossible to enable bluetooth under Ubuntu

  - by PCh

  I just installed Ubuntu 12.04 (dual boot, kept Windows just in case) on my new Acer Aspire One 756-877. As soon as I installed it I also installed the Broadcom driver, since wifi wasn't working, and that solved it right away. But when I tried Bluetooth, I had a problem that I see is quite recurring: -The hardware is on (and working fine under Windows) -The icon shows up on the menu, giving me the options of turning Bluetooth on or off, and then just "Bluetooth preferences". -I can apparently turn it on that way, which only lights up the icon but makes no difference at all (and doesn't give any other options in the Bluetooth menu) -When I open "Bluetooth preferences" (whether Bluetooth is apparently on or off, it makes no difference), it says it's disabled and will not let me slide the button to enable it. I've rebooted, but nothing happens. -The material is Broadcom and the port (if it's relevant at all) is Port_#0001.Hub_#0003 I tried the following commands suggested in other similar questions, with no result at all: sudo dmesg | grep blue and sudo service bluetooth start and sudo /etc/init.d/bluetooth start Any other clues on what I can do? Thanks for your time!

  Read the article

• Keyring no longer prompts for password when SSH-ing

  - by Lie Ryan

  I remember that I used to be able to do ssh [email protected] and have a prompt asks me for a password to unlock the keyring for the whole GNOME session so subsequent ssh wouldn't need to enter the keyring password any longer (not quite sure if this is in Ubuntu or other distro). But nowadays doing ssh [email protected] would ask me, in the terminal, my keyring password every single time; which defeats the purpose of using SSH keys. I checked $ cat /etc/pam.d/lightdm | grep keyring auth optional pam_gnome_keyring.so session optional pam_gnome_keyring.so auto_start which looks fine, and $ pgrep keyring 1784 gnome-keyring-d so the keyring daemon is alive. I finally found that SSH_AUTH_SOCK variable (and GNOME_KEYRING_CONTROL and GPG_AGENT_INFO and GNOME_KEYRING_PID) are not being set properly. What is the proper way to set this variable and why aren't they being set in my environment (i.e. shouldn't they be set in default install)? I guess I can set it in .bashrc, but then the variables would only be defined in bash session, while that is fine for ssh, I believe the other environment variables are necessary for GUI apps to use keyring.

  Read the article

• dpkg in uninterruptible sleep

  - by Khaled

  I have several Ubuntu servers 10.04. Today, I tried to upgrade some packages on one of these servers and the process got stuck. I logged in using another SSH session and I found that dpkg is in D state (uninterruptible sleep). According to what I have read, this state results generally from I/O waiting like waiting for NFS share. I can not understand why dpkg will block in this state. I can not see any obvious problems other than this. Here is the output of ps to show the blocking process: $ ps axo pid,cmd,s,wchan | grep dpkg 22571 /usr/bin/dpkg --status-fd 2 D call_rwsem_down_read_failed This process can not be killed even with kill -9. So, I will not be able to install/upgrade any package unless I reboot the server. What makes it worse is that the remote reboot does not succeed in such a case (having processes in D state). Can anyone help with this? How can I avoid this in the future.

  Read the article

• 404 Errors in ubuntu 13.10

  - by Levan

  Just installed ubuntu 13.10 I did apt-update in terminal and sow this Err http://ppa.launchpad.net /ubuntu/saucy amd64 Packages 404 Not Found Err http://ppa.launchpad.net /ubuntu/main amd64 Packages 404 Not Found Err http://ppa.launchpad.net /ubuntu/saucy i386 Packages 404 Not Found Err http://ppa.laun W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/saucy/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/main/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/saucy/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. I do not understand why am I getting this errors wine's ppa shows that 13.10 is available and the above I even do not know what is it ?? any help how to fix this grep -rn "ubuntu-wine" /etc/apt/sources* /etc/apt/sources.list.d/ubuntu-wine-ppa_-saucy.list:1:deb http://ppa.launchpad.net/ubuntu-wine/ppa /ubuntu saucy main /etc/apt/sources.list.d/ubuntu-wine-ppa_-saucy.list:2:# deb-src http://ppa.launchpad.net/ubuntu-wine/ppa /ubuntu saucy main

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Connecting PS3 dualshock on Ubuntu 14.04 with 3.13.0-34-generic?

  - by 5th Wheel

  The last entries/queries I can find about PS3 dual shock controller are dealing with older kernel versions. It looks like there may still be a problem with using the PS3 dual shock via USB(or bluetooth) with 14.04? I'm only guessing because I get no sign of detection or input when I plug in the USB. When I run dmesg | grep sony [ 4687.762302] sony 0003:054C:0268.0003: can't set operational mode [ 4687.770639] sony: probe of 0003:054C:0268.0003 failed with error -38 So at this point, I don't know if it's worth running : sudo apt-get install xboxdrv I also found this article LINK but it's dated 01/2013. I was considering installing steam, and checking out some of the games. There are a few in particular I want to check out, but I'm afraid of purchasing them and then my controller does not work. I don't have a ps3, I just have the controller for Sixaxis/emulator/Android set up... I see mentions for QTsixa and xboxdrv, but the posts are at least a year old(older distibution/kernels) Ideally, I'd like to just plug in USB, and play. No Bluetooth.

  Read the article

• Trying to install Proprietory Nvidia Graphics Drivers

  - by Peter Snow

  After reading and trying many different suggestions for some hours, I returned to this how-to: https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia The first problem I encounter is how to identify which of the listed drivers support my Nvidia GEForce 630M graphics card. Following the links doesn't really help, since it is not stated there either (except where support for a new driver was added later which is explicitly stated, but the original devices covered are not). However, even if I knew, if it doesn't appear in the 'Additional Drivers' dialogue (see below), how will I install it? Second Issue: The article goes on to say that available drivers for my hardware are usually listed in 'Additional Drivers'. In my case, they aren't. Unfortunately, it doesn't tell me how to correct that or work around it? I've checked the bios and there is no way offered there to disable the integrated graphics, only the Nvidia graphics. I've also tried each available option in this: $ sudo update-alternatives --config i386-linux-gnu_gl_conf My system is an Acer Aspire 4752G bought May 2012. I'm running Ubuntu 12.04LTS. uname -a : 3.2.0-38-generic-pae #61-Ubuntu SMP Tue Feb 19 12:39:51 UTC 2013 i686 i686 i386 GNU/Linux It's 64bit hardware but I installed 32bit OS for greater software compatibility. Running $ sudo tail -fn 500 /var/log/Xorg.0.log | grep '(EE)' returns" (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 28.886] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) The reason for wanting the proprietor y drivers is because my laptop comes with 3D accelerated graphics adaptor and so rather than confining myself to struggling with the on-board graphics, I would rather use it. I also want to experiment with using it for bitmining (which uses the GPU's for computing power).

  Read the article

• Ubuntu sound volume is 40% lower than in Windows

  - by ncomx

  I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

  Read the article

• How do I get 1366x768 resolution on 12.04?

  - by Megan

  I am on an HP Envy 14, and the proper resolution that I should be using is 1366x768. This is not an option and I am stuck on 1024x768. I am using Linux 12.04. lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] I've tried to add the resolution as a mode in xorg.conf but that does not work. Please any help would be appreciated. I'm new to Linux and just got my dual boot working but this resolution issue is killing me. Edit1 I just tried using the xrandr command: xrandr --newmode "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync But I get an error: xrandr: Failed to get size of gamma for output default Edit2 lsmod returns the following: Module Size Used by vesafb 13844 1 rfcomm 47604 12 bnep 18281 2 parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 arc4 12529 2 joydev 17693 0 hid_logitech_dj 18594 0 i915 472941 5 uvcvideo 72627 0 usbhid 47199 1 hid_logitech_dj hid 99559 2 hid_logitech_dj,usbhid psmouse 87692 0 iwlwifi 332525 0 mac80211 506816 1 iwlwifi videodev 98259 1 uvcvideo snd_hda_codec_idt 70795 1 mei 41616 0 btusb 18288 2 v4l2_compat_ioctl32 17128 1 videodev hp_accel 25976 0 lis3lv02d 19876 1 hp_accel hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi input_polldev 13896 1 lis3lv02d drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 serio_raw 13211 0 snd_hda_intel 33773 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec bluetooth 180104 23 rfcomm,bnep,btusb cfg80211 205544 2 iwlwifi,mac80211 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec mac_hid 13253 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device wmi 19256 1 hp_wmi video 19596 1 i915 intel_ips 18174 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 I have installed ATI/AMD proprietary FGLRX graphics driver. But there is another one called ATI/AMD proprietary FGLRX graphics driver (post-release updates) which I have trouble installing because it gives me an error and tells me to look at some sort of jockey log.

  Read the article

• How do I fix the HDMI/DVI display output with Intel HD 4000 Graphics in 12.04?

  - by YumYumYum

  I have an Alienware Dell PC with Intel HD 4000 Graphics (Ivy Bridge) as verified by the output of lspci | grep VGA posted below. 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) The PC only has HDMI and DVI display outputs and using the HDMI output I am only being offered abnormal resolutions. As you can see below it does not even list HDMI1 or DVI1 but just only a fallback. $ export DISPLAY=:0.0 && xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1360 x 768, maximum 1360 x 768 default connected 1360x768+0+0 0mm x 0mm 1360x768 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 How can I fix this? Does it just need to be configured differently or will I need to use a newer kernel (as Intel Graphics drivers are included in the kernel)? Follow up: kernel to latest Step 1: Go to: http://kernel.ubuntu.com/~kernel-ppa/mainline/ Go to last: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/ Download: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3_3.6.0-030600rc3.201208221735_all.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-extra-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb Step 2: sudo dpkg -i linux*.deb Step 3: reboot which shows that i have Ubuntu 12.04 with latest $ uname -a Linux sun-Alienware-X51 3.6.0-030600rc3-generic #201208221735 SMP Wed Aug 22 21:36:32 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux But still same problem remain.

  Read the article

• Sound card not detected in 13.04

  - by Ganessh Kumar R P

  I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

  Read the article

• I can't enable extra effects in Ubuntu 10.10. Please help?

  - by jasoncruz98

  I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

  Read the article

• Why can't tuxboot and ubuntu play well together?

  - by mmr

  I'm trying to get clonezilla to run off of a usb stick, and it seems that the right way to do that is via tuxboot. Tuxboot is not compilable on ubuntu. I used git to get it from the repository, and then when I run the 'install' script (because building it is apparently not allowed, since the build script just tries to install windows things). Qmake-linux wants my qmake executable to be in the same directory as the stuff I pulled down, and let's just say that if there's a way to do this easily, I ain't seein' it. So then I download the linux file, the most recent of which is tuxboot-linux-25. Try to run it, get a failure that libpng12.so.0 isn't found. OK, then I go to install that via the instructions I found on the web but firefox seems to have already deleted from my history (yay!) Then I add the /usr/local/lib directory to ldconfig via emacs (had to install that too, of course): http://ubuntuforums.org/showthread.php?t=369848 I still get the errors that libpng12.so.0 cannot be opened because 'No such file or directory'. ldconfig -p | grep libpng shows that the library is there, but it still doesn't seem to be findable. What to do next? (for the record, doing this in windows is painless-- download, click, and it's done. But I'm trying to be all linuxy and get away from Windows for this...)

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >