Search Results

Search found 8373 results on 335 pages for 'hardware recommendation'.

Page 61/335 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

  • Laptop screen brightness stuck

    - by Bart van Heukelom
    I can no longer adjust the brightness of my laptop screen, it's stuck at the lowest. In Linux, the brightness adjustment keys (Fn + F4/F5) still work, since a brightness popup shows and the meter bar changes, but it does this in a strange way. Starting at 100%, each successive press of the "lower brightness" button moves the bar to: 67% 50% 0% 26% 12% Or another random pattern like that. The problem is not Linux however, since I can't change the brightness from Windows (7) either. Where do I even begin to look? Since the problem does not seem be OS-specific, I've searched in the BIOS, but it has no option like that. How did this happen? I think it's been this way since when I lowered the brightness to 0%, then pressed the "lower brightness" key again. Not sure about that though.

    Read the article

  • Bought a 1U server, now can't find rails

    - by Paul Tomblin
    I bought a 1U server used on eBay (a Supermicro motherboard, but branded "Asempra"), and I also bought a set of "Supermicro" rails, but unfortunately the rails didn't fit the server. The side of the server looks like: Can you tell me where I can find rails for this machine?

    Read the article

  • How many users are "many users"?

    - by kemp
    I need to find a solution for a website which is struggling under load. The site gets ~500 simultaneous connections during peak time, and counts around 42k hits per day. It's a wordpress based site bridged with a vbulletin forum with a lot of contents and a fairly complex structure which makes intensive use of the database. I already implemented code level full page caching (without this the server just crashes), and configured all other caching directives as well as combining css files and the like to limit http requests as much as possible. I need to understand if there is more that can be done via software or if the load is just too much for the server to handle and it needs to be upgraded, because the server goes down occasionally during peak times. Can't access the server now, but it's a dedicated CentOS machine (I think 4GB ram, can't say what CPU) running apache/mysql. So back to the main question: how can I know when the users are just too many?

    Read the article

  • Is the motherboard the cause of these errors?

    - by ianfuture
    Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

    Read the article

  • Is my hard drive about to die?

    - by Hristo Deshev
    I have two hard drives set up as a RAID 1 array on my server (Linux, software RAID using mdadm) and one of them just got me this "present" in syslog: Nov 23 02:05:29 h2 kernel: [7305215.338153] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 Nov 23 02:05:29 h2 kernel: [7305215.338178] ata1.00: irq_stat 0x40000008 Nov 23 02:05:29 h2 kernel: [7305215.338197] ata1.00: failed command: READ FPDMA QUEUED Nov 23 02:05:29 h2 kernel: [7305215.338220] ata1.00: cmd 60/08:00:d8:df:da/00:00:3a:00:00/40 tag 0 ncq 4096 in Nov 23 02:05:29 h2 kernel: [7305215.338221] res 41/40:08:d8:df:da/00:00:3a:00:00/00 Emask 0x409 (media error) <F> Nov 23 02:05:29 h2 kernel: [7305215.338287] ata1.00: status: { DRDY ERR } Nov 23 02:05:29 h2 kernel: [7305215.338305] ata1.00: error: { UNC } Nov 23 02:05:29 h2 kernel: [7305215.358901] ata1.00: configured for UDMA/133 Nov 23 02:05:32 h2 kernel: [7305218.269054] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 Nov 23 02:05:32 h2 kernel: [7305218.269081] ata1.00: irq_stat 0x40000008 Nov 23 02:05:32 h2 kernel: [7305218.269101] ata1.00: failed command: READ FPDMA QUEUED Nov 23 02:05:32 h2 kernel: [7305218.269125] ata1.00: cmd 60/08:00:d8:df:da/00:00:3a:00:00/40 tag 0 ncq 4096 in Nov 23 02:05:32 h2 kernel: [7305218.269126] res 41/40:08:d8:df:da/00:00:3a:00:00/00 Emask 0x409 (media error) <F> Nov 23 02:05:32 h2 kernel: [7305218.269196] ata1.00: status: { DRDY ERR } Nov 23 02:05:32 h2 kernel: [7305218.269215] ata1.00: error: { UNC } Nov 23 02:05:32 h2 kernel: [7305218.341565] ata1.00: configured for UDMA/133 Nov 23 02:05:35 h2 kernel: [7305221.193342] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 Nov 23 02:05:35 h2 kernel: [7305221.193368] ata1.00: irq_stat 0x40000008 Nov 23 02:05:35 h2 kernel: [7305221.193386] ata1.00: failed command: READ FPDMA QUEUED Nov 23 02:05:35 h2 kernel: [7305221.193408] ata1.00: cmd 60/08:00:d8:df:da/00:00:3a:00:00/40 tag 0 ncq 4096 in Nov 23 02:05:35 h2 kernel: [7305221.193409] res 41/40:08:d8:df:da/00:00:3a:00:00/00 Emask 0x409 (media error) <F> Nov 23 02:05:35 h2 kernel: [7305221.193474] ata1.00: status: { DRDY ERR } Nov 23 02:05:35 h2 kernel: [7305221.193491] ata1.00: error: { UNC } Nov 23 02:05:35 h2 kernel: [7305221.388404] ata1.00: configured for UDMA/133 Nov 23 02:05:38 h2 kernel: [7305224.426316] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 Nov 23 02:05:38 h2 kernel: [7305224.426343] ata1.00: irq_stat 0x40000008 Nov 23 02:05:38 h2 kernel: [7305224.426363] ata1.00: failed command: READ FPDMA QUEUED Nov 23 02:05:38 h2 kernel: [7305224.426387] ata1.00: cmd 60/08:00:d8:df:da/00:00:3a:00:00/40 tag 0 ncq 4096 in Nov 23 02:05:38 h2 kernel: [7305224.426388] res 41/40:08:d8:df:da/00:00:3a:00:00/00 Emask 0x409 (media error) <F> Nov 23 02:05:38 h2 kernel: [7305224.426459] ata1.00: status: { DRDY ERR } Nov 23 02:05:38 h2 kernel: [7305224.426478] ata1.00: error: { UNC } Nov 23 02:05:38 h2 kernel: [7305224.498133] ata1.00: configured for UDMA/133 Nov 23 02:05:41 h2 kernel: [7305227.400583] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 Nov 23 02:05:41 h2 kernel: [7305227.400608] ata1.00: irq_stat 0x40000008 Nov 23 02:05:41 h2 kernel: [7305227.400627] ata1.00: failed command: READ FPDMA QUEUED Nov 23 02:05:41 h2 kernel: [7305227.400649] ata1.00: cmd 60/08:00:d8:df:da/00:00:3a:00:00/40 tag 0 ncq 4096 in Nov 23 02:05:41 h2 kernel: [7305227.400650] res 41/40:08:d8:df:da/00:00:3a:00:00/00 Emask 0x409 (media error) <F> Nov 23 02:05:41 h2 kernel: [7305227.400716] ata1.00: status: { DRDY ERR } Nov 23 02:05:41 h2 kernel: [7305227.400734] ata1.00: error: { UNC } Nov 23 02:05:41 h2 kernel: [7305227.472432] ata1.00: configured for UDMA/133 From what I read so far, I am not sure if read errors mean that a hard drive is dying on me (no write errors so far). I've had hard drive errors in the past and those always had errors about failing to write to specific sectors in the logs. Not this time. Should I be replacing the drive? Could something else be causing the problem? I've scheduled a smartctl -t long test that will finish in a couple of hours. I hope this will give me some more info.

    Read the article

  • Thinkpad Motherboard Component List

    - by Nirmal
    I got an IBM Thinkpad R51 notebook and it's not working. When opened I found that an IC next to the battery has burnt. The worst part is that the IC number is no more present on it due to the burning. Where could I get the schematics of such motherboards? Will the schematics have the part number? Please help. Thank you.

    Read the article

  • Mutli-processor workstation as a workstation/server

    - by posdef
    I work in a research institute and a number of programs we use are computationally intensive (I actually wrote one of them). Right now we have one computer that is dedicated for one of these programs (with local accounts only, as in users physically sitting in front of that pc) and the other programs are run on individual workstations assigned to people. I have been looking around to common brands such as Dell and HP, for a some sort of a small/medium scale server, which can be used as a workhorse by sending tasks remotely. It appears as if there is nothing in between workstations with one 6-core processor and a bunch of extras (like fancy graphics etc) and rack mount servers with ridiculous amount of RAM and HDD expansion capabilities but still relatively little number of processors/cores. I wonder if what I am looking for is such a small niche product? Are there other solutions that I might not be aware of? Does anyone know of a multi proc- multi-core workstation/server that is still within the reasonable

    Read the article

  • Connect wired-only devices to a remote wireless access point?

    - by billpg
    Hi everyone. In building A, I have a Netgear wireless access point using WPA2. Works great, no problems. In building B, I have some devices that only have wired Ethernet ports. They can't see my access point. What I need is a gizmo that connects over-the-air to my access point in building A, talks WPA2, and converts the packets to and from a wired Ethernet port. Netgear-access-point in building A      (WPA2 WiFi) Wireless bridge device          <-- Looking for this.      (Cat5 ethernet) My devices in building B. I've looked for devices on Amazon, but the descriptions are infuriatingly unclear. It says it supports WPA2, but does it support it as a client? Grrr... Any recommendations please?

    Read the article

  • Blinking motherboard power LED

    - by Corey D
    I was just rebuilding an old desktop PC to be used as a HTPC and the LED on the motherboard that indicates when there is power is blinking fairly rapidly. The only way I can get the machine to boot is to press the power button immediately after plugging it in, and even then I cannot make it into the BIOS. The power supply has more than enough juice to power all of the components, and is from a reputable manufacturer. The motherboard is an Asus and is about 4.5 years old. Is my power supply hosed? Or is it my motherboard?

    Read the article

  • Bare-metal virtualisation for the desktop

    - by Andrew Taylor
    Hi, Does anyone have any knowledge about bare-metal virtualisation products? I'm interested in building a new desktop machine for home, I've been looking at the Intel Quad Core processors and I'd like to put 8GB of RAM in there, but, it got me thinking about making the most out of the available resources. I thought if I could get a good 64bit machine, put some bare-metal virtualisation on, then have a primary system, I'd also be able to bring up some extra virtualised systems as and when I needed. I know most of the bare metal systems are designed for the server market, but, is there anything out there that works well for a desktop. What are the caveats? I presume I won't be able to make the most out of any video cards I could buy, what about just getting a decent screen resolution, will this be a problem? I run a single 24" screen. What about DVD/CD writing, is this possible? I'd like to re-rip my CD collection, I was hoping the quad 64Bit goodness would help me out with the encoding. I currently use a Mac and couldn't go back to windows so that leaves Linux, I was thinking a primary OS of ubuntu. Does this make a difference? Thanks Andrew

    Read the article

  • Performing mechanical movements using computer

    - by Vi
    How to make a computer (in particular, my laptop) to perform some mechanical movements without buying anything $5, soldering things inside computer or creating big sophisticated circuits? Traditionally CD-ROM tray is used to make computer do some movement IRL by, for example, SSH command, but in laptop tray is one-shot (unless manually reloaded) and also not very comfortable [mis]usage. Some assistance circuits can be in use too, but not complex. For example, there is a little motor that can work on USB power. Devices in my computer: DVD-ROM tray: one-time push. USB power: continuous power to the motor or LEDS or relay that turns on something powerful. Audio card. 3 outputs (modprobe alsa model=test can set Mic and Line-in as additional output). One controllable DC output (microphone) that can power up LED and some electronic (may be even mechanic?) relay. Also with sophisticated additional circuiting can control a lot of devices with a good precision. Both input and output support. Probably the most useful object in computer for radio ham. Modem. Don't know about this much, it doesn't work because of hsfmodem crashes kernel if memory is = 1GB. May be it's "pick up" and "hang up" can turn on and off power taken from USB port? Video card. VGA port? S-Video port? Will them be useful? Backlight. Tunable, but probably unuseful. CardBus (or some) slot. Nothing interesting for the task probably (is it?). AC adapter and battery. Probably nothing programmable here. /* My AC adapter already have additional jacks to connect extra devics */ Keyboard. No use. Touchpad. Good sensor (synclient -m 1), but no output. Various LEDs inside laptop. Probably too weak and requires soldering. Fans inside laptop. Poor control over them, requires soldering and dangerous to tinker. HDD (internal and external) that can be spin down and up (hdparm -Y, cat /dev/ubb). But connecting anything serially with it's power line makes HDD underpowered... And too complex. Is something are missed? Any ideas how to use described components? Any other ideas? May be there are easily available /* in developing countries */ cheap devices like "enhanced multimeters" that are controllable from computer and can provide configurable output and measure current and other things? Things to aid pushing many physical buttons with computer. Isn't this a simple idea and implementation and a lot of use in good hands?

    Read the article

  • Max length of a USB Cable?

    - by Click Ok
    I want to use a very long USB cable to, for example, place a webcam in a different room. The max length that I found was 5 meters. What the max length of a USB cable and... What the max length that I can get using USB extension cables? Thanks in advance!

    Read the article

  • What would make a noise in a PC on graphics operations on a passively-cooled system?

    - by T.J. Crowder
    I have this system based on the Intel D510MO motherboard, which is basically an Atom D510 (dual-core HT Atom w/built-in GPU), an Intel NM10 chipset, and a Realtek Gigabit LAN controller. It's entirely passively cooled. I noticed almost immediately that there was a kind of very, very soft noise that corresponded with graphics operations, sort of the noise you'd get if you had a sheet of flat paper and slid something really light across it — but more electronic than that. I wrote it off as observation error and/or disk activity triggered by the graphics operation (although the latter seemed like a lot of unnecessary disk activity). It isn't. I got curious enough that I finally did a few controlled experiments, and here's what I've determined: It isn't the HDD. For one thing, the sounds the HDD makes (when seeking, when reading or writing, when just sitting there spinning) is different. For another, I used sudo hdparm -y /dev/sda (I'm using Ubuntu 10.04 LTS) to temporarily put the disk on standby while making sure that non-disk graphics op was happening in a loop. The disk spun down, but the other sound continued, corresponding perfectly with the timing of the graphics op. (Then the disk spun up again, but it takes long enough that I could rule out the HDD.) It isn't the monitor; I ensured the two were well physically-separated and the sound was definitely coming from the main box. It isn't something else in the room; the sound is coming from the box. It isn't cross-talk to an audio circuit coming out the speakers. (It doesn't have any speakers.) It isn't my mouse (e.g., when I'm trying to make graphics ops happen); the sound happens if I set up a recurring operation and don't use the mouse at all, or if I lift the mouse off the table slightly (but enough that the laser still registers movement). It isn't the voices in my head; they never whisper like that. Other observations: It doesn't seem to matter what the graphics operation is; anything that changes what's on the screen seems to do it. I get the sound when moving the mouse over the Chromium tab bar (which makes the tab backgrounds change); I get it when a web page has a counter on it that changes the text on the page: I get it when dragging window contents around. The sound is very, very slightly louder if the graphics op is larger, like scrolling a text area when writing a question on superuser.com, than for smaller operations like the tick counter on the web page. But it's very slight. It's fairly loud (and of good duration) when the op involves color changes to substantial surface areas. For instance, when asking a question here on superuser and you move the cursor between the question box and the tag box, and the help to the right fades out, changes, and fades back in. (Yet another example related to the web browser, so let me say: I hear it when operations completely unrelated to the web browser as well.) It doesn't sound like arcing or anything like that (I'd've shut off the machine Right Quick Like if it did). Moving windows does it. Scrolling windows (by and large) doesn't. I have the feeling I've heard this sort of thing before, when all system fans were on low and such, with other systems — but (again) written it off as observational error. For all the world it's like I'm hearing the CPU working (as opposed to the GPU; note the window scroll thing above) or data being transferred somewhere, but that just seems...unlikely. So what am I hearing? This may seem like a very localized question, but perhaps other silent PC enthusiasts may be interested as well...

    Read the article

  • Computer wont POST after power outage

    - by aaron
    I had just turned my computer on and windows was loading when the power in my neighborhood went out. Normally, when I turn my computer on, the video card fan spins up, then slows down, POST and windows boots. Now, after the blackout, the video card fan spins fast and wont stop. Nothing is displayed on the monitor. The monitor does not detect that the video card is sending it signals, it just stays on standby. No POST or beep codes. This is what I have tried so far: My motherboard has 2 PCI express slots and I tried plugging the video card into both of them but that didn't fix anything. I have replaced the power supply, that didn't fix anything. I cleared the CMOS, that didn't fix anything. Does anyone have any idea of what could be wrong? Thanks!

    Read the article

  • Experience with AMCC 3ware 9650se raid cards? Ours seems dead

    - by antiduh
    We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

    Read the article

  • Scope of Mainframe Technologies Today?

    - by Vaibhav Bajpai
    I have been recently allocated to training in Mainframe Technologies at my company (where I am currently working as a Trainee). I am slated to learn DB2, JCL, CICS, and Cobol during the programme. I am from a C++ background, and curious how the community here feels of these technologies. I am also curious to know, how mainframe computers fit into today's computing scenario where distributed computing has taken over almost completely.

    Read the article

  • System Event ID 11 Disk

    - by Guy Thomas
    Upon starting Windows Server 2008 R2 I get this error message: Event ID 11 Disk The driver detected a controller error on \Device\Harddisk3\DR3. There are also also 3 more similar messages for Harddisk 2, 4, and 5, but not zero or 1. Checking the event viewer reveals it's been going on for 3 months. I ran chkdsk - no bad sectors. Any advice on the cause, better still, a solution?

    Read the article

  • Keyboard with normal layout just without numpad?

    - by Pla
    Do you know any keyboard that does not have a numpad and, at the same time, is not a compact keyboard? I type a lot and I enjoy using standard full sized keyboards. I am annoyed by the presence of the numpad. I've never used it; it just wastes desktop space! All I could find are (even more annoying) compact keyboards. Sadly those keyboards are so compact that cram the arrow keys and the page up/down keys in a very little space. So, does anyone know a keyboard with a normal layout but without the numpad?

    Read the article

  • What Wireless Router/ADSL Modem to get? N-band a must!!

    - by JJarava
    I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

    Read the article

  • Static noise in headphones

    - by John Murdoch
    I have a Asus P6T based system. I was using the on-board sound (plugging in Logitech X-230 2.1 analog speakers in the green "front speakers" 3.5mm analog output, then plugging in my headphones in that). I was quite happy with the sound quality (didn't hear any static noise if volume was turned down to my normal listening level). Then about a week ago I started having terrible static noise from the left channel, and no normal audio on that left channel. Right channel had more static noise than usual but did have a bit of sound. I tried using the AC'97 in front of my case but that seemed to have no signal. I decided my on-board sound card has gone bad and bought an internal sound card to replace it (Startech 7.1Ch PCI). This fixed the "no sound from left channel problem", but I had much more audible static noise. I decided the card was low quality and/or it had interference from all the other things happening inside the computer case, and bought a Sweex SC016 external USB sound card. But even with that I have static noise in headphones. Positioning the USB sound card differently doesn't seem to help. Trying the other analog outputs (e.g., surround) doesn't help. The static noise in all cases is proportional to the volume. I have tried different headphones, but the situation is situation though perhaps the flavour of the static noise changes slightly. So what are my options? a) Get another, more expensive, external USB sound card hoping the quality will improve? b) Get another, more expensive, internal sound card (PCIe 1x perhaps) hoping the quality will improve? c) Get a dedicated DAC box? d) Get some Hi-Fi earphones? Suggestions? tl;dr - Two different sound cards both still have static noise in headphones.

    Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >