Search Results

Search found 21678 results on 868 pages for 'network traffic'.

Page 61/868 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• iwlwifi on lenovo z570 disabled by hardware switch

  - by Kevin Gallagher

  It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

  Read the article

• Connman not connecting to internet

  - by sagarchalise

  I wanted to try connman as I heard it will be replacing network manager. I kinda liked its looks and feel but the problem is I donot get connected to internet. I am using ADSL and it connects to my adsl router but doesnot ping google or any other sites. I tried to change the default gateway as well as use static ips but to no avail. It displays I am wired but doesnot open any sites or ping to any external sites except for 198.168.1.1 which is my router ip. Can anyone help ? Basically it is doing alright with network-manager as well as wicd

  Read the article

• Internet connection randomly drops out

  - by Dr_Bunsen

  Since a week or 2, I have this random network failures. No error pops up, the system says it's still connected to the internet(wifi and wired). The problem is, I can't connect to anything, even a ping google.com gives no feedback. And after many network-manager resets it will work again, for just a minute, and drop out again. I noticed that the /etc/resolv.conf contains this line: nameserver 127.0.0.1 I left out the "Do not edit" stuff, and after it worked for a second, this line is added: search lan When I change the nameserver to 8.8.8.8, I am still able to connect to anywhere. Does anyone got a clue what is happening here? I will provide any information asked. Thanks in advance p.s. I run Ubuntu 13.04 since lastnight(24-06-2013)

  Read the article

• how to find available wireless networks

  - by Quinn

  I'm using an HP Pavilion dv6000 I've looked at other answers similar to this question how ever when I look at my network symbol it doesn't say anything that the answer below says "Make sure that your wifi hardware switch is on or not. It is either F2 or F12 or near to it. Once the switch is enabled, there is a small fan-like applet on the top panel (Gnome Network Manager), fourth from the right. Click on it and if there is no tick mark on the option 'Enable Wireless', enable it. Wait till your wifi connection name appears." it how says 'Enable Networking' my wi-fi switch is on and I've tried using terminal to kill the applet as another answer suggests trying. Does anyone have any other ideas that might help? Just in case anybodies curious as to how I'm posting this I'm on my other ubuntu laptop that's running an older version.

  Read the article

• On restart server Ethernet went down saying not configured!

  - by Sumant

  i justy have configured my dhcp server with static ip. after configuration dhcp server & routers were working fine. but after restarting server network connectivity went off. there are two lan cards but none of them is up.i tried setting up manually ip address again but it remains same. when i executed sudo /etc/init.d/networking restart i got this message * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... /bin/sh: cannot open /etc/iptables_rules: No such file Failed to bring up eth0. i have configured my server according to this What is it the problem with ubuntu 11.10 or some configuration error. i am not getting it please help me.

  Read the article

• Disabling Bluetooth crashes 3G: can I consider this a bug?

  - by workflow

  I'm on an Acer TravelMate 8372G here runnning Ubuntu 11.10 64bit and I get the following weird behaviour: As soon as I turn off bluetoooth, the built-in 3G connection disconnects and Network Manager is unable to reconnect, leaving the following track in syslog: NetworkManager[1205]: <warn> GSM modem enable failed: (32) Unknown error The only way I'm able to reconnect 3G is by going all the way through rfkill unblock bluetooth rfkill block wwan rfkill unblock wwan sudo service network-manager restart My question to you guys: should I file a bug, or is there any any logical connection I'm missing that makes this a feature? = thanks! workflow

  Read the article

• How to set Ubuntu as wireless accespoint in the GUI way?

  - by Agmenor

  My aim is to make my Ubuntu machine be a wireless accesspoint using wifi. Of course I found two AskUbuntu questions already treating that; this one and that one. Nevertheless, as far as I am concerned I would like to set up such a network in the Graphical User Interface (GUI) way. Please avoid solutions with the command line. So a solution suggesting to use Network Manager would be really welcomed. Please name and describe very precisely each step, so I can easily find the equivalent in my own language. Thank you for your answers!

  Read the article

• How can I have my VPN connect automatically when the wireless connects?

  - by ams

  I have a working VPN connection using NetworkManager, OpenConnect, and the network-manager-openconnect-gnome package, but I have to start it manually every time I connect to a network, and I have to enter my password manually each time. How can I get it to connect automatically, and remember my password (securely)? I have checked the 'Connect Automatically' box on the Configure VPN page, but this seems to have no effect. I've also got the 'Start connecting automatically' box checked in the pop-up box, and that does avoid the need to press the connect button in that window, but seems to have no part in kicking off the whole process in the first place. There is no option to remember the password in the window, but maybe there's one somewhere else?

  Read the article

• Traffic consumed by Team Foundation Server 2010

  - by micha12

  We are currently selecting a source control and issue tracking software, and are looking towards Team Foundation Server 2010. Some participants of our project often have slow Internet connection (for example during travel), and therefore it is important for us to have a source control system that does not consume too much traffic. I was unable to find information on traffic consumption when using TFS 2010. Does anyone has such info? Does TFS 2010 support traffic compression? Do other source control systems (like SVN, for example) produce less or more traffic than TFS 2010?

  Read the article

• Is there anything on a local network or desktop environment that could effect JScript execution?

  - by uku

  I know this sounds odd. The JS on my project functions perfectly, except when the web site is accessed using computers at one specific company. To make things even more difficult, the JS fails only about 50% of the time when run from that company. The JS failure occurs with FireFox, Chrome, and IE. I have tested this myself using FF and Chrome on a thumb drive. The browsers on my thumb always display my project site perfectly, except when run from a computer on said company's network where they fail at the same rate as the installed browsers. My JS is using jQuery and making some Ajax calls. The Ajax calls are where the failure is occurring. To diagnose the problem I created a logging function for my Ajax calls and recorded success and failure. Over a one month period, there were only a handful of failures (about 1%) from all access points other than this company. Oddly enough, the Ajax calls in the logging function are not failing. There is nothing exotic there - Just Win XP SP3. I have never noticed any other unusual behavior from their network. The company is a division of a mega ISP and is on their corporate network. Any other suggestions for troubleshooting would be welcome.

  Read the article

• Oracle Technology Network Bulletin: "Oracle and Sun: Transformation Time"

  Get ready to be part of a diverse community of developers, system administrators, and architects.

  Read the article

• knetworkmanager not starting at all

  - by yoshi

  It seems that my knetworkmanager is not starting anymore. Read: In KDE4's sys tray I don't have a icon to manage my networks. Also when starting it from terminal or kick off menu literally "nothing" happens. I don't know what's wrong with it. Sadly after reading this answer on superuser.com it seems I can not connect to wifi via iwconfig 'cause my network is WPA2 encrypted. (Basically I can not set they passphrase - invalid argumenterror.) So it seems I've to get knetworkmanger running again as I also can't download other tools. I've tried stuff like sudo service network-manager restart but it didn't seem to help. I'm kinda puzzled so any help for this would be appreciated. PS: If it hasn't become clear: The whole drama of is simply I can't connect to wifi and internet :o)

  Read the article

• Google Maps: Traffic on top of Custom Map

  - by Kyle

  I want to add traffic information to my custom map. Currently I'm using a Tile Layer Overlay on my Google Map to display custom map tiles. When I try to add GTrafficOverlay to my map, my custom map tiles display above the traffic information. Is there any way to display the traffic above my GTileLayerOverlay? (Using the JavaScript api)

  Read the article

• NetworkManager refuses to manage my WLAN interface

  - by user104167

  I'm using Ubuntu 12.10 with Gnome 3.6 on a brand-new Samsung NP900X4C. The installer detected the wireless adapter, took in the SSID and WPA passphrase, wrote these into /etc/network/interfaces and connected perfectly. Once installation was finished I wanted to switch to using NetworkManager to manage the wireless adapter, since this is much more convenient than fiddling with /etc/network/interfaces every time I find a new hotspot. Therefore I edited /etc/NetworkManager/NetworkManager.conf to set: [ifupdown] managed=true When I rebooted NetworkManager, the problems started: - The NetworkManager tray applet changed from saying device not managed to device not ready - I lost all internet connectivity as wlan0 would not associate to the Access Point - if I set managed=false in NetworkManager.conf and restarted both NetworkManager and networking services from the command-line, the Gnome desktop "semi-crashed" and lost all its Window Decorations, the panel, the launcher and basically became unusable. However if I restart the computer completely after setting managed=false, wlan0 once again works perfectly.

  Read the article

• free network traffic analysis

  - by sadegh

  free network traffic analysis .

  Read the article

• Surfing the internet while downloading becomes painful

  - by Mehper C. Palavuzlar

  When I try to surf the internet while downloading files (http based, torrent etc.), it becomes painful to open web pages since download traffic is mostly allocated for downloads. Is there a program that can manage this process so that when I surf the weight will be given to internet browser, and when the browser is idle, the weight will be on the download side? I'm using Firefox 3.6.2 on Win7, so any good Firefox addons or Windows based freewares are acceptable.

  Read the article

• Assignment to LAN queues (qWAN1 & qWAN2) from dual-WAN in pfSense

  - by Kurian

  I need help creating floating rules in pfSense for the following: I have two upper limited download queues qWAN1 and qWAN2 on my LAN interface. Each has its own qACK1, qDefault1 etc. How do I assign all unclassified traffic from WAN1 to LAN->qWAN1->qDefault1 and from WAN2 to LAN->qWAN2->qDefault2. qLink is the one and only default queue on LAN so that I get wire speed to the pfSense host from the LAN.

  Read the article

• Slow down individual connections passing through a Linux router?

  - by davr

  We have a Linux server acting as a router/firewall for our office. Occasionally someone will upload a large file that takes up all our bandwidth. I don't want to implement any complex rules or traffic shaping, but I'm wondering if there is a way to slow down a single connection on the spot? I found tcpnice, but it doesn't slow down the transfers in my testing.

  Read the article

• Allow traffic from ssl-vpn to enter ipsec tunnel on fortigate

  - by Sascha

  we configured our FortiGate 50B to route traffic from our local net 192.168.10.* (which is our office) to a remote network 172.29.112.* using an ipsec tunnel. Everything works fine as long my computer has an ip from 192.168.10.*. We can also connect to the office network from at home using a ssl vpn connection. Once connected we receive an ip from 10.41.41.*. Now I want to allow the traffic flow from 10.41.41.* to 172.29.112.* just like it does from the office network. Could somebody point me in the right direction what I would need to do? Thanks, Sascha

  Read the article

• Two NIC cards with the same metric - Internet traffic going out the wrong one

  - by bvanderw

  I have two NIC cards in my computer - one is connected to our corporate network and the Internet, the other is connected to a private LAN through a Linksys WRT54G. Both cards use DHCP. This was never an issue with Windows XP, but with Windows Vista (and Windows 7) the metric for the 0.0.0.0 route is the same (20), and it appears that some network traffic that should go out my main network card are going out my secondary card instead. The solution to date is to delete the 0.0.0.0 route associated with the second NIC card, but I have to do this several times a day. Is there a better solution? --Bruce

  Read the article

• mystery Internet traffic to port 445

  - by Ben Collver

  Recently, I noticed traffic from the office network to TCP port 445 on the Internet [a]. Below are the Linux firewall log entries to Facebook's network [b] and Google's network [c]. I would like to identify the source of this traffic. My first guess is that Facebook and Google might be using multiple TCP ports for SSL load balancing. However, I could not confirm this based on the web proxy logs. What else might it be? [a] http://support.microsoft.com/kb/204279 [b] Sep 4 08:30:03 firewall01 kernel: IN=eth0 OUT=eth2 SRC=10.0.0.131 DST=69.171.237.34 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=14287 DF PROTO=TCP SPT=51711 DPT=445 WINDOW=8192 RES=0x00 SYN URGP=0 [c] Aug 28 06:02:41 firewall01 kernel: IN=eth0 OUT=eth2 SRC=10.0.0.115 DST=173.194.33.47 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=4558 DF PROTO=TCP SPT=49294 DPT=445 WINDOW=8192 RES=0x00 SYN URGP=0

  Read the article

• routing traffic between two network cards through firewall

  - by RubyFreak

  I'm trying to test a network device (firewall) using a Linux box, with two network cards, one interface connected to the WAN zone and another interface to LAN zone. The configuration is similar with that |ETH0| <-> | FW | <-> ETH1 So from both interfaces I'm able to ping the respective firewall interface. But i'm not able to fire something like: ping -I eth0 ip.from.eth1 and to get any answer. Is that possible or should the linux network namespace solution or user level tcp stacks (VMs are out of question)

  Read the article

• Wireless Drivers for Broadcom BCM 4321 (14e4:4329) will not stay connected to a wireless network

  - by Eugene

  So, I'm not necessary new to Linux, I just never took the time to learn it, so please, bare with me. I just swapped out one of my wireless cards from one computer to another. This wireless card in question would be a "Broadcom BCM4321 (14e4:4329)" or actually a "Netgear WN311B Rangemax Next 270 Mbps Wireless PCI Adapter", but that's not important. I've tried (but probably screwed up in the process) installing the "wl" , "b43" and "brcmsmac" drivers, or at least I think I did. Currently I have only the following drivers loaded: eugene@EugeneS-PCu:~$ lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" b43 387371 0 bcma 52096 1 b43 mac80211 630653 1 b43 cfg80211 484040 2 b43,mac80211 ssb_hcd 12869 0 ssb 62379 2 b43,ssb_hcd The main issue is that with most of the drivers available that I've installed, they will find my wireless network but, they will only stay connected for about a minute with abnormally slow speed and then all of a sudden disconnect. Currently, the computer is hooked into another to share it's connect so that I can install drivers from the internet instead of loading them on to a flash drive and doing it offline. If anyone has any insight to the problem, that would be awesome. If not, I'll probably just look up how to install the Windows closed source driver. Edit 1: Even when I try the method here, as suggested when this was marked as a duplicate, I still can't stay connected to a wireless network. Edit 2: After discussing my issue with @Luis, he opened my question back up and told me to include the tests/procedures in the comments. Basically I did this: Read the first answer of the link above when this question was marked as duplicate which involved installing removing bcmwl-kernel-source and instead install firmware-b43-installer and b43-fwcutter. No change of result and contacted Luis in the comments, who then told me to try the second answer which involved removing my previous mistake and installing bcmwl-kernel-source Now the Network Manger (this has happend before, but usally I fixed it by using a different driver) even recognizes WiFi exist (both non-literal and literal). Luis who then suggested sudo rfkill unblock all rfkill unblock all didn't return anything, so I decide to try sudo rfkill list all. Returns nothing (no wonder rfkill unblock all did nothing). I enter lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" and that returns nothing. Try loading the driver by entering sudo modprobe b43 and try lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" again. Returns this: eugene@Eugenes-uPC:~$ sudo modprobe b43 eugene@Eugenes-uPC:~$ lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" b43 387371 0 bcma 52096 1 b43 mac80211 630653 1 b43 cfg80211 484040 2 b43,mac80211 ssb_hcd 12869 0 ssb 62379 2 b43,ssb_hcd So to recap: Currently Network Manager doesn't recognize Wireless exists, b43 drivers are loaded and I've currently hardwired a connect from my laptop to the computer that's causing this.

  Read the article

• Network Balancing Act

  - by listey

  Next up in our popular Oracle Solaris How To series is the Integrated Load Balancer, part of the suite of network facilities that are built in to Oracle Solaris 11. Providing Layer 3 and Layer 4 load balancing capabilities you can use this device to simulate or even replace your hardware based network infrastructure. Read more about the capabilities and how to get a basic configuration working in How to Set Up a Load-Balanced Application Across Two Oracle Solaris Zones

  Read the article

• My Article Network - Effective and Simple Techniques For Powerful Search Engine Rankings

  My Article Network is a great and noteworthy entry into the link building field created by Matt Callen, who is already well regarded for his line of quality products and services. By using article marketing to leverage traffic, My Article Network can automatically generate visitors to your website.

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >