Search Results

Search found 1841 results on 74 pages for 'pci compliant'.

Page 61/74 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Media Center - TV constantly pauses 1/2 second then plays 1 second

  - by Bob

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing. I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card, ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• None of usb-controllers are working after a crash

  - by Cray

  So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

  Read the article

• SATA HDD stuttering on reads (LED on)

  - by jdehaan

  I hope I can get some new ideas to solve the issue. What I have: AMD Phenom II X4 905e Box, Sockel AM3 Gigabyte GA-MA790XTA-UD4, AMD 790X, AM3 ATX WD Caviar GreenPower 1,5TB SATA II 4GB Kit OCZ DDR3 PC3-10666 Platinum Low-Voltage CL7 HIS HD 4670 iSilence4 DDR3 1024MB Native HDMI Dual-DVI, PCI-Express Behavior: Everything works normally excepting the HDD accesses. The drive seems to get stuck in reading data (LED drive by Mainboard is on for a while) then recovers and goes on. There is a delay of more than 30s sometimes. Often it is a matter of 5-10s. This does not seem related to the workload of the disk. What I tried so far: Use different SATA port: I switched from the SATA3 to SATA2 then the SATA driven by the CPU, no difference. Turned AHCI off, drove the SATA in IDE mode, same behavior, now I felt like the HDD has problems Deactivated energy saving settings (BeQuiet, ...), disabled 3 CPUs (msconfig) supposing some race condition or trouble with changing freqs, same trouble With Windows7 Professional 64Bit, I installed the hotfix http://support.microsoft.com/?scid=kb%3Ben-us%3B976418&x=8&y=9 with no success. The problem description matches what I experienced, so I felt lucky but was quite in a sad mood after being deceived. Burned the DLG 5.04f DataLifeGuard CD from WD to check the drive. All tests passed, to my surprise! Installed an Ubuntu on the same drive i386 flavour. Drive still in IDE mode, exactly the same behavior. So the OS does not matter. What I did not try yet: http://www.gigabyte.eu/Support/Motherboard/BIOS_Model.aspx?ProductID=3263 I have a F2 BIOS and there is a F3a Beta, did someone have similar issues that were solved by this update? It is a beta so I fear upgrading a bit and I could find no release notes at all on the net, not really serious work maybe they had issues translating from Chinese??? Using another HDD drive Does someone have other hints or a similar issue? Maybe it is neither the HDD nor the Mainboard/BIOS?

  Read the article

• NFS high CPU usage

  - by user269836

  Hello, I have a very strange issue. I have next server: Intel(R) Xeon(TM) MP CPU 3.16GHz cat /proc/cpuinfo | grep proce | wc -l 8 free -m total used free shared buffers cached Mem: 28203 27606 596 0 10789 9714 -/+ buffers/cache: 7103 21100 Swap: 24695 0 24695 RAID card *-storage description: RAID bus controller product: MegaRAID vendor: LSI Logic / Symbios Logic physical id: 7 bus info: pci@0000:13:07.0 logical name: scsi2 version: 01 width: 32 bits clock: 66MHz capabilities: storage pm bus_master cap_list rom configuration: driver=megaraid latency=32 resources: irq:134 memory:d8ff0000-d8ffffff(prefetchable) memory:df600000-df60ffff(prefetchable) HDD: 10x148Gb SCSI U320 15k - RAID5 /dev/sdb1 807G 674G 93G 88% /storage /dev/sdb1 /storage ext4 defaults,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,noatime,nodiratime,noacl,errors=remount-ro 0 1 network cards ethtool -i eth0 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ethtool -i eth1 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ifconfig bond0 Link encap:Ethernet HWaddr 00:0f:1f:ff:d6:4d inet addr:192.168.15.71 Bcast:192.168.15.255 Mask:255.255.255.0 inet6 addr: fe80::20f:1fff:feff:d64d/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:1062818202 errors:0 dropped:3918 overruns:0 frame:0 TX packets:1041317321 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10000 RX bytes:258867684559 (241.0 GiB) TX bytes:396569192650 (369.3 GiB) this server running only nfs-kernel-server uname -a Linux nas2-backup 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux Debian 6. What do I have, once per day or two, LA goes up, it can be reached around LA: 40 but if I do: nfs-kernel-server restart. Every thing is OK. But on the next day or a little bit later, LA goes up again. Servers are connected to d-link dgs 1016d with 24 GBits ports. I have tried everything to find out what the problem is. Why it's happening, but still I can not resolve this issue. Any ideas on what is happening here?

  Read the article

• Core Data - Entity Relationships Not Working as expected

  - by slimms

  I have set up my data model in xcode like so EntityA AttA1 AttA2 EntityB AttB1 AttB2 AttB3 I then set up the relationships EntityA Name: rlpToEntityB Destination: EntityB Inverse: rlpToEntityA To Many: Checked EntityB Name: rlpToEntityA Destination: EntityA Inverse: rlpToEntityB To Many: UnChecked i.e. relationship between the two where Each one of EntityA can have many EntityB's It is my understanding that if i fetch a subset of EntityB's I can then retrieve the values for the related EntityA's. I have this working so that i can retrieve the EntityB values using NSManagedObject *objMO = [fetchedResultsController objectAtIndexPath:indexPath]; strValueFromEntityB = [objMO valueForKey:@"AttB1"]; However, if I try to retrieve a related value from EntityA by doing the following strValueFromEntityA = [objMO valueForKey:@"AttA1"]; I get the error "The entity EntityB is not Key value coding-compliant for the key Atta1" Not surprisingly i suppose if i switch things around to fetch from EntityA i cannot access attributes of EntityB So it appears the defined relationshipare being ignored. Can anyone spot what i am doing wrong? I confess im very new to iPhone programming and especially to Core Data so please go easy on me and provide verbose explanations or point me in the direction a specific resource. I have downloaded the apple sample apps (Core Data Books, Top Songs and recipes) but I still can't work this out. Thanks in advance, Nev.

  Read the article

• MySQL & PHP - select/option lists and showing data to users that still allows me to generate queries

  - by Andrew Heath

  Sorry for the unclear title, an example will clear things up: TABLE: Scenario_victories ID scenid timestamp userid side playdate 1 RtBr001 2010-03-15 17:13:36 7 1 2010-03-10 2 RtBr001 2010-03-15 17:13:36 7 1 2010-03-10 3 RtBr001 2010-03-15 17:13:51 7 2 2010-03-10 ID and timestamp are auto-insertions by the database when the other 4 fields are added. The first thing to note is that a user can record multiple playings of the same scenario (scenid) on the same date (playdate) possibly with the same outcome (side = winner). Hence the need for the unique ID and timestamps for good measure. Now, on their user page, I'm displaying their recorded play history in a <select><option>... list form with 2 buttons at the end - Delete Record and Go to Scenario My script takes the scenid and after hitting a few other tables returns with something more user-friendly like: (playdate) (from scenid) (from side) ######################################################### # 2010-03-10 Road to Berlin #1 -- Germany, Hungary won # # 2010-03-10 Road to Berlin #1 -- Germany, Hungary won # # 2010-03-10 Road to Berlin #1 -- Soviet Union won # ######################################################### [Delete Record] [Go To Scenario] in HTML: <select name="history" size=3> <option>2010-03-10 Road to Berlin #1 -- Germany, Hungary won</option> <option>2010-03-10 Road to Berlin #1 -- Germany, Hungary won</option> <option>2010-03-10 Road to Berlin #1 -- Soviet Union won</option> </select> Now, if you were to highlight the first record and click Go to Scenario there is enough information there for me to parse it and produce the exact scenario you want to see. However, if you were to select Delete Record there is not - I have the playdate and I can parse the scenid and side from what's listed, but in this example all three records would have the same result. I appear to have painted myself into a corner. Does anyone have a suggestion as to how I can get some unique identifying data (ID and/or timestamp) to ride along on this form without showing it to the user? PHP-only please, I must be NoScript compliant!

  Read the article

• No signal on monitor after plug it to a linux box

  - by yaroot

  I use my old computer as an NAS, so I remove the monitor after I installed linux on it (disconnect vga cable). I use ssh to control the machine and it works fine. Until some day, after kernel/softare upgrade or messing up some configs, I cannot connect to it through ssh, then I have to plug the monitor back, but the monitor says "No input signal". So I have to restart the computer WITH the monitor connected, and the monitor's back! I think the computer/linux kernel doesn't detect the monitor plug-in event. So how can I start my linux box without a monitor, but when it goes wrong I can still plug my monitor (vga) back and use the console. Edit: just one pci-e video card, has dvi, vga, tv/out (s-video) Edit2: Xorg is not running. I just need the console (CTRL+ALT+F1). The problem is, if the machine booted without a monitor connected, it won't give me a pseudo terminal after I attach the vga cable while it's running. Clearly the monitor is not auto detected as usb device. I'm wondering how to let the monitor auto detected.

  Read the article

• Internet Explorer Warning when embedding Youtube on HTTPS site?

  - by pellepim

  Our application is run over HTTPS which rarely presents any problems for us. When it comes to youtube however, the fact that they do not present any content over SSL connections is giving us some head ache when trying to embed clips. Mostly because of Internet Explorers famous little warning message: "Do you want to view only the webpage content that was delivered securely? This page contains content that will not be delivered using a secure HTTPS ... etc" I've tried to solve this in several ways. The most promising one was to use the ProxyPass functionality in Apache to map to YouTube. Like this: ProxyPass: /youtube/ http://www.youtube.com ProxyPassReverse: /youtube/ http://www.youtube.com This gets rid of the annoying warning. However, the youtube SWF fails to start streaming The SWF i manage to load into the browser simply states : "An error occurred, please try again later". Potential solutions are perhaps: Download youtube FLV:s and serve them out of own domain (gah) Use custom FLV-player and stream only FLV:s from youtube over a https proxy? Update 10 March: I've tried to use Googles Youtube API for ActionScript to load a player. It looked promising at first and I was able to load a player through my https:// proxy. However, the SWF that is loaded contains loads of explicit calls to different non-ssl urls to create authentication links for the FLV-stream and for loading different crossdomain policies. It really seems like we're not supposed to access flv-streams directly. This makes it very hard to bypass the Internet Explorer warning, short of ripping out the FLV:s from youtube and serving them out of your own domain. There are solutions out there for downloading youtubes FLV:s. But that is not compliant with the Youtube terms of use and is really not an option for us.

  Read the article

• Static noise in headphones

  - by John Murdoch

  I have a Asus P6T based system. I was using the on-board sound (plugging in Logitech X-230 2.1 analog speakers in the green "front speakers" 3.5mm analog output, then plugging in my headphones in that). I was quite happy with the sound quality (didn't hear any static noise if volume was turned down to my normal listening level). Then about a week ago I started having terrible static noise from the left channel, and no normal audio on that left channel. Right channel had more static noise than usual but did have a bit of sound. I tried using the AC'97 in front of my case but that seemed to have no signal. I decided my on-board sound card has gone bad and bought an internal sound card to replace it (Startech 7.1Ch PCI). This fixed the "no sound from left channel problem", but I had much more audible static noise. I decided the card was low quality and/or it had interference from all the other things happening inside the computer case, and bought a Sweex SC016 external USB sound card. But even with that I have static noise in headphones. Positioning the USB sound card differently doesn't seem to help. Trying the other analog outputs (e.g., surround) doesn't help. The static noise in all cases is proportional to the volume. I have tried different headphones, but the situation is situation though perhaps the flavour of the static noise changes slightly. So what are my options? a) Get another, more expensive, external USB sound card hoping the quality will improve? b) Get another, more expensive, internal sound card (PCIe 1x perhaps) hoping the quality will improve? c) Get a dedicated DAC box? d) Get some Hi-Fi earphones? Suggestions? tl;dr - Two different sound cards both still have static noise in headphones.

  Read the article

• Pitfalls and practical Use-Cases: Toplink, Hibernate, Eclipse Link, Ibatis ...

  - by Martin K.

  I worked a lot with Hibernate as my JPA implementation. In most cases it works fine! But I have also seen a lot of pitfalls: Remoting with persisted Objects is difficult, because Hibernate replaces the Java collections with its own collection implementation. So the every client must have the Hibernate .jar libraries. You have to take care on LazyLoading exceptions etc. One way to get around this problem is the use of webservices. Dirty checking is done against the Database without any lock. "Delayed SQL", causes that the data access isn't ACID compliant. (Lost data...) Implict Updates So we don't know if an object is modified or not (commit causes updates). Are there similar issues with Toplink, Eclipse Link and Ibatis? When should I use them? Have they a similar performance? Are there reasons to choose Eclipse Link/Toplink... over Hibernate?

  Read the article

• IE: Undocumented "cache" attribute defined for input elements?

  - by aefxx

  Hi everybody. I've stumpled upon a strange behavior in IE(6/7/8) that drives me nuts. Given the following markup: <input type="text" value="foo" class="bar" cache="yes" send="no" /> Please note that the cache attribute is set to yes. However IE somehow manages to change the attributes value to cache="cache" when rendering the DOM. So, I wonder, is there an undocumented feature that I'm not aware of? I've googled about an hour now but couldn't find any info on this (not even on MSDN). NOTE I'm aware that adding custom attributes is non-standard compliant and that boolean attributes should be noted as attribute="attribute. Nevertheless I have to cope with these as they were introduced long before I joined the team. These custom attributes are used in conjunction with javascript to provide a more user friendly approach to form handling (and it works out quite well with Firefox/Safari/Opera/Chrome). I know that I could simply convert these custom attributes to x-data attributes that will be introduced with HTML5 but that would take me several hours of extra work - sigh. Hope, I made myself clear. Thanks in advance.

  Read the article

• Media Center setup won't complete for watching TV

  - by Robert

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• Online resizing of kvm guest root filesystem?

  - by Bittrance

  I have a Linux guest that uses an LVM volume directly as root file system (that is, there is no partition table). libvirt config looks thus: <os> <type arch='x86_64' machine='rhel6.4.0'>hvm</type> <kernel>/boot/vmlinuz-X.Y.Z.el6.x86_64</kernel> <initrd>/boot/initramfs-X.Y.Z.el6.x86_64.img</initrd> <cmdline>console=ttyS0 root=/dev/vda</cmdline> <boot dev='hd'/> </os> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='none' io='native'/> <source dev='/dev/vg/guest'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> From inside the guest: $ mount /dev/vda on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) Is it possible to resize the guest's root partition without rebooting the guest? Just doing lvextend on the host and resize2fs from the guest does not seem to be enough.

  Read the article

• Setting my NIC to full duplex

  - by David

  I am trying to optimize the network speed of my Solaris X86 server, and have discovered that the Cisco 3548 that it is connected to has issues with the NIC in my server. The NIC appears to have not been configured fully, and is coming up 100 half-duplex. The 3548 ports are all set to 100 full. Ideally I'd like to have the server set for 100 full, and have been attempting to configure it using ndd commands. However I have had no results. The following command: -bash-3.00# dladm show-dev rtls0 link: unknown speed: 100 Mbps duplex: unknown The NIC shows up as: pci bus 0x0001 cardnum 0x06 function 0x00: vendor 0x10ec device 0x8139 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ which should be configurable. I have modified the configuration file from auto config (5) to 100 fdx (4) to no avail. If there is no other choice, I could alter the Cisco 3548 to be 100 half-duplex. However, this solution causes huge performance loss. Currently throughput is about 500Kbps, when it should be around 40Mbps.

  Read the article

• AMD 700, 800 series chipset. I'm lost.

  - by Shiki

  I've been an Intel / NVidia user ever since I started using computers. Intel really gone up with the prices, and they won't get cheaper. So I decided to get an AMD. But WHICH one? I mean.. not shopping question but.. what are the differences? Like: 880GMA comes only with a single PCI ex and it looks like a chinese replica (no offense). While 890FX comes with 5PCI-ex for QuadCrossfire. Also.. what's the deal with 7xx series? I mean.. its the same price. Yet its older? Or why is it 7xx? Isn't there a single chipset between? Not chinese YET it's durable/fine for long-term usage? What it should know (desktop stuff): NVidia GPU (Zalman AMP2 GTX 260^2 (one card)) Phenom 1090T cpu A somewhat good audio. Any ideas which is the chipset I'm searching for? If this sounds too much of a shopping question, feel free to edit. I just want some clarification on these chipsets.

  Read the article

• Extend RAID 1 (HP SmartArray P410i) running Linux

  - by Oliver

  I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) (sn: removed) array A (SAS, Unused Space: 1335535 MB) logicaldrive 1 (279.4 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 1 TB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 1 TB, OK) Initially there were two 300GB disks that got replaced by 1TB disks and I now have to extend the logical volume to use that extra space. However, when trying to do so I get the following warning: => ctrl slot=0 ld 1 modify size=max Warning: Extension may not be supported on certain operating systems. Performing extension on these operating systems can cause data to become inaccessible. See ACU documentation for details. Continue? (y/n) Is it safe to say yes or am I at risk of corrupting the file system / loosing data? Rearranging and extending the file system afterwards shouldn't be an issue as I can take the server offline and boot from a gparted live disk. Here's the config of the RAID controller in use: => ctrl all show detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: removed RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: Rev C Firmware Version: 5.12 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: False Drive Write Cache: Disabled SATA NCQ Supported: True And the partition table: Number Start End Size Type File system Flags 1 1049kB 274GB 274GB primary ext4 boot 2 274GB 300GB 25.8GB extended 5 274GB 300GB 25.8GB logical linux-swap(v1)

  Read the article

• img onload doesn't work well in IE7

  - by rmeador

  I have an img tag in my webapp that uses the onload handler to resize the image: <img onLoad="SizeImage(this);" src="foo" > This works fine in Firefox 3, but fails in IE7 because the image object being passed to the SizeImage() function has a width and height of 0 for some reason -- maybe IE calls the function before it finishes loading?. In researching this, I have discovered that other people have had this same problem with IE. I have also discovered that this isn't valid HTML 4. This is our doctype, so I don't know if it's valid or not: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> Is there a reasonable solution for resizing an image as it is loaded, preferably one that is standards-compliant? The image is being used for the user to upload a photo of themselves, which can be nearly any size, and we want to display it at a maximum of 150x150. If your solution is to resize the image server-side on upload, I know that is the correct solution, but I am forbidden from implementing it :( It must be done client side, and it must be done on display. Thanks. Edit: Due to the structure of our app, it is impractical (bordering on impossible) to run this script in the document's onload. I can only reasonably edit the image tag and the code near it (for instance I could add a <script> right below it). Also, we already have Prototype and EXT JS libraries... management would prefer to not have to add another (some answers have suggested jQuery). If this can be solved using those frameworks, that would be great. Edit 2: Unfortunately, we must support Firefox 3, IE 6 and IE 7. It is desirable to support all Webkit-based browsers as well, but as our site doesn't currently support them, we can tolerate solutions that only work in the Big 3.

  Read the article

• What do I need to consider when buying hardware to meet my needs?

  - by Darth Android

  I'm looking to build a new computer from the ground up. I'm not sure what to look out for and need guidance and help on how to pick the hardware needed to construct my new rig. How do I know what to buy? How do I find out if a given CPU will be enough for a certain game or application that I want to run? How do I find out if a given graphics card will be enough for a certain game or application? What is important when looking at motherboards? How much memory do I need? How do I know how much wattage I need for a power supply? What size case do I need? What relevant standards do I need to read up on and be aware of? PCI, PCIe, SATA, USB 2.0, USB 3.0, etc... What "gotchas" do I need to be on the lookout for? Please keep responses generation-agnostic to ensure they will be helpful to our future users. While Stack Exchange does not permit shopping recommendations, it doesn't provide any general advice to consider when buying hardware. So, instead of just telling those that ask what to buy that it's not allowed, let's tell them how to figure out what they need. This question was Super User Question of the Week #20 Read the June 20, 2011 blog entry for more details or submit your own Question of the Week.

  Read the article

• Error - "IR Hardware not detected" - but it's installed/working

  - by Robert

  I am trying to do: Settings-TV-Set up TV signal. During this process I am getting the error "IR Hardware not detected." With the remote, I can select the "try again" button (to re-detect) and it tries again, so the remote works. Plugging in the "IR blaster" doesn't change anything. (I wouldn't expect any difference, but I read a post which said you needed that. I will get Media Center to change channels if I can get that working - but first things first.) I was able to do the setup months ago when I had cable. and everything was fine. I just got DirecTV. (BTW - During the above process, Media Center detects the signal coming in on channel 3. Windows XP Media Center SP3. The TV Tuner card is a Pinnacle TCTV HD PCI. Everything - and I mean everything - has the latest firmware and drivers - as of 4 months ago when I fixed a different problem. So I DON"T WANT TO HEAR the standard answer to check drivers/firmware. THANK YOU.) Thanks for any help.

  Read the article

• ifcf-ethx problem

  - by Shahmir Javaid

  Every time i run service networkd restart This is what i get Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up interface eth0: ** (process:12951): WARNING **: fetch_connections_done: error fetching user connections: (2) The name org.freedesktop.NetworkManagerUserSettings was not provided by any .service files. Active connection state: activating Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1 state: activated Connection activated [ OK ] Here is my ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller DEVICE=eth0 BOOTPROTO=dhcp DEFROUTE=yes DHCPCLASS= HWADDR=xxx IPV4_FAILURE_FATAL=yes IPV6INIT=no ONBOOT=yes OPTIONS=layer2=1 PEERDNS=yes PEERROUTES=yes TYPE=Ethernet UUID=xxx And my ifcfg-eth1 # Intel Corporation 82541PI Gigabit Ethernet Controller DEVICE=eth1 HWADDR=xxx ONBOOT=no And my ifcfg-lo DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) BROADCAST=127.255.255.255 ONBOOT=yes NAME=loopback Any ideas?

  Read the article

• Going from small to medium sized websites.

  - by Landitus

  I've been coding websites for a couple of years now, mostly in php and xhtml. I come from the design world, but I'm proud of doing standart compliant websites and great interfaces. Also used Wordpress and loved it. Most of the time there were really simple commercial websites, with no database included, where everything is done from scratch. Every page is parsed through an index?page=xxx and But I have a few prospects that are larger websites (let's call them 'medium sized websites') where I feel I'm lacking the following: How to dispach or render the pages (MVC controller instead of index?page=???) Proper page hierarchy and easy breadcrumbs implementation Auto generation of navigation menu, or an easy way to maintain them? Clean URLs Form validation Easy database support I really don't know if I should be looking into php scripts, and refine my skills or get into a CMS (like drupal) or a PHP framework. I found Wordpress very assuring and didn't feel trapped into crazy conventions, but I feel is not the right tool for this. I hate the CMS Page with the big textbox as I am used to code every page by hand my pages are not a title and a textbox. Got the feeling? My php skills are sort of medium/low still, but I would like to hear some thoughts of what I should learn to take the next step!

  Read the article

• Media Center setup won't complete for watching TV

  - by Robert

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro to watch TV and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing TV okay (with the new DirecTV) before I tried to run setup. (I ran setup to try to do recording with Media Center.) Hardware/Software: Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• Performance experiences for running Windows 7 on a Thin-Client?

  - by Peter Bernier

  Has anyone else tried installing Windows 7 on thin-client hardware? I'd be very interested to hear about other people's experiences and what sort of hardware tweaks they had to do to get it to work. (Yes, I realize this is completely unsupported.. half the fun of playing with machines and beta/RC versions is trying out unsupported scenarios. :) ) I managed to get Windows 7 installed on a modified Wyse 9450 Thin-Client and while the performance isn't great, it is usable, particularly as an RDP workstation. Before installing 7, I added another 256Mb of ram (512 total), a 60G laptop hard-drive and a PCI videocard to the 9450 (this was in order to increase the supported screen resolution). I basically did this in order to see whether or not it was possible to get 7 installed on such minimal hardware, and see what the performance would be. For a 550Mhz processor, I was reasonably impressed. I've been using the machine for RDP for the last couple of days and it actually seems slightly snappier than the default Windows XP embedded install (although this is more likely the result of the extra hardware). I'll be running some more tests later on as I'm curious to see particularl whether the streaming video performance will improve. I'd love to hear about anyone's experiences getting 7 to work on extremely low-powered hardware. Particularly any sort of tweaks that you've discovered in order to increase performance..

  Read the article

• Which JavaScript framework for me?

  - by LeonixSolutions

  This is not to be a subjective question; nor is it intended to start a religious war. Which JavaScript framework for me? Until now, I haven't coded any JS at all (no biggy, it's just another language). I have been set in my ways and eschewed any client-side code, lest the user have JS turned off, or try to "just change this a little, to see what happens" - and then expect me to support it. So, until now it has all been server-side, with PHP and an ODBC compliant database. However, I am beginning to see advantages to client-side input validation and improved graphical experience for users which would help me to produce more professional web-based applications. I am looking for a framework which : doesn't have a steep learning curve is full-featured, although that does not mean that the one with the most features wins (remember the 80/20 rule) is mature an stable (even if still in development) integrates well with common IDEs if possible. I use NetBeans for PHP (and occasionally MS visual studio for C# (I seem to have drifted away from Eclipse)) allows me to develop web sites/apps for mobile devices support for Goggle charts (or other charting) would be a bonus has good AJAX/JSON support, but I imagine that they all do Taking that into consideration, is there a "right" framework for me, or does it not really matter? I looked briefly at JQuery and JQueryGui and liked what I saw, but I really don't have time, owing to deadlines, to try them all out and see which one suits me, much as I know that I ought to.

  Read the article

• Why do Firefox and Opera ignore max-width inside of display: table-cell?

  - by brad

  The following code displays correctly in Chrome or IE (the image is 200px wide). In Firefox and Opera the max-width style is ignored completely. Why does this happen and is there a good work around? Also, which way is most standards compliant? Note One possible work around for this particular situation is to set max-width to 200px. However, this is a rather contrived example. I'm looking for a strategy for a variable width container. <!doctype html> <html> <head> <style> div { display: table-cell; padding: 15px; width: 200px; } div img { max-width: 100%; } </style> </head> <body> <div> <img src="http://farm4.static.flickr.com/3352/4644534211_b9c887b979.jpg" /> <p> Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec facilisis ante, facilisis posuere ligula feugiat ut. Fusce hendrerit vehicula congue. at ligula dolor. Lorem ipsum dolor sit amet, consectetur adipiscing elit. leo metus, aliquam eget convallis eget, molestie at massa. </p> </div> </body> </html> [Update] As stated by mVChr below, the w3.org spec states that max-width does not apply to inline elements. I've tried using div img { max-width: 100%; display: block; }, but it does not seem to correct the issue.

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >