Search Results

Search found 10549 results on 422 pages for 'recovery console'.

Page 61/422 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• URGENT: help recovering lost data

  - by Niels Kristian

  I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I did, and now the data is gone. I tried to uncomment the line in fstab and run sudo mount -a but that didn't get back my data. What can I do!? CONTENT OF FSTAB: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md3 /ssd auto defaults 0 0

  Read the article

• Alternative to Ophrack for Windows 7

  - by Moshe

  Are there any password retrieval programs like 0phrack that will work with windows 7?

  Read the article

• Linux RAID: Replacing Failed Drive...permanantly

  - by user137519

  Okay, odd question here. I have a server with RAID 5. A drive failed, in a really physically in a really odd way. On the machine it boots and is seen by the BIOS but...no partition can be seen on the drive consistantly (in and out). 2 out of 3 drives working...I made new spare disk and added it, RAID 5 rebuilt clean. All appears well but...when I reboot it keeps trying to use the 2nd drive which doesn't give any partition data, so of course the RAID 5 gets 2 out of 3...again. The status of my drive is as follows: /dev/sda2:Good /dev/sdb2 (drive has physical problem so no partition data) bad, /dev/sdc2:good /dev/sdd2:good. Every time I reboot the mdadm system seems to keep trying to use /dev/sdb which has physical failure (although spins and is detected). /dev/sdd is the new drive I created. I added /dev/sdd to the raid and it rebuilds the raid but this action isn't memorized upon reboot so it keeps listing /dev/sda and /dev/sdc but doesn't use the perfectly good /dev/sdd until I re-add manually. I've tried removing the dead drive with the mdadm tool, but as it cannot see /dev/sdb paritions it will not fail or remove it (says partition doesn't exist). the /etc/mdadm.conf was automatically made on the original OS install which only lists: DEVICE partitions MAILADDR root ARRAY /dev/md2 super-minor=2 ARRAY /dev/md0 super-minor=0 ARRAY /dev/md1 super-minor=1 Basically just the raids to use on boot. I need to remove this semi-dead drive (/dev/sdb) but I'd prefer to know why this is happening before I do. any ideas or suggestions. I supposed I could attempt to clone/replace /dev/sdb (the partitions on drive show up, then disappear shortly after) but given the partition "chester cat" behaviour this seems risky to me and as I have a working "spare" it seems unnecessary. Thanks in advance for your insight.

  Read the article

• Changing filesystem types "safely"

  - by warren

  Back in Windows 95 OSR2 (I believe), there was a conversion tool that would take your extant FAT16 partition and change it to FAT32 non-destructively (most of the time). Are there any tools like that now for going from one file system type to another in situ without destroying the data? For example, from etx3 to ext4? Or NTFS to XFS?

  Read the article

• [Outlook 2007] How to recover the deleted Tasks from a Deleted Profile?

  - by JoshuaD

  Edit: OK. I've found the OST with the tasks in it, but I am unable to import an OST into outlook, it appears it needs to be converted to PST first. Is there anyone who knows a free OST - PST converter or some way to import OSTs directly into outlook? I am using outlook 2007 linked to an MSN email account through outlook connector. I recently added [email protected] (Fake address) to my outlook and deleted [email protected]. I thought my tasks were locally stored seperately from the email address, but it turns out when I deleted [email protected], I also lost all of my tasks. This is catastrophic. Is there any way to recover them? They're not stored on the MSN web account. I figure they must still be somewhere on my computer. I just don't know where to look or how to look there. Thank you.

  Read the article

• How to save a ntfs partition which suddenly became empty

  - by SteveO

  One ntfs partition of my laptop was suddenly wiped out without any notice to me, when I rebooted from Windows 7 to Ubuntu 12.04 today. I am in need of help to save my files on that partition, which are important and unfortunately haven't been backed up yet. My laptop has two operating systems: Windows 7 and Ubuntu 12.04. with a ntfs partition shared between the two operating systems for storing some data files (109GB, about 97%of which has been used). I have almost always been using Ubuntu, but today I happened to have to work under Windows. Following is a record of what happened in the time order, numbering according to which operating system I was in at each stage. When I started into Windows 7, right before being able to log in, it took a while and two reboots to configure the Windows. I thought it was normal, since last time when I was using Windows two weeks ago, it took very long and several reboots to update Windows, since the last time I used Windows before then was in November last year. Then after finally being able to log in Windows 7, I installed Libre Office, MathType (I got it from http://dl.portablesoft.org/down/?id=2515, which I originally thought was a trial version, but later I learned was a cracked version and felt wrong. I made a copy of it at dropbox http://dl.dropbox.com/u/13029929/MathType_6.8_PortableSoft.rar, not for distributing it but to list it there just in case it will help to identify the problem), and MikTex. I then edited some .doc files in the ntfs partition under both Microsoft Office with MathType, and Libre Office. When I finished working under Windows and rebooted into Ubuntu, Ubuntu did some filesystem checking and reported that the ntfs partition was not able to be mounted. Then I rebooted again into Windows, and found that the ntfs partition had been emptied, i.e. all the data files were gone, and only one system file bootsqm.dat and one system directory System Volume Information were there, with their last updated time being the time when I first rebooted from Windows to Ubuntu (in fact, it is 4 hours in advanced than the actual time of that rebooting , see immediately below) Also I noticed that the time shown by Windows is not correct for my time zone (UTC-05:00) Eastern Time (US & Canada)), which is 4 hours in advance than the correct time (my current time is 3am, but the computer shows 7am). Same things happened when I rebooted into Ubuntu again: the ntfs has been emptied and left with only one Windows system file bootsqm.dat and one Windows system directory System Volume Information. the time shown by Ubuntu is 4 hours in advance than the correct time. I wonder what I can do to retrieve my data files back on the ntfs partition? If I am not able to do it myself, will some professionals be able to help me out? Thanks a lot! PS: I didn't think I did any thing that required emptying that partition. But there were quite some works I did during that stage right before the reboot from Windows to Ubuntu when the problem occured. Did I make any mis-operation?

  Read the article

• Recover data from SD card

  - by Paul Tarjan

  I have a 2GB kingston microSD card which is about 3 years old. I put it in a reader today in my Windows Vista computer, wrote a 32MB file onto it, safely removed it, and then tried to read it elsewhere. Nothing. Putting it back in vista it now says You need to format the disk in drive F: before you can use it. What should I do? I have access to many computers and OSes if your recommendations need that. I would be very sad if I lost all the contents of the card. Most of the data is backed up, but there are a few things that aren't. :( Doing a # dd if=/dev/sdg of=~/tmp/sd.bin gives me a 2 gig file, and grepping the file it seems like lots of my data is still there, how can I put it back together?

  Read the article

• How best to handle end user notification in the event of system failure incl. email?

  - by BrianLy

  I've been asked to research ways of handling end user notifications when systems such as email are experiencing problems. Perhaps an example will make this a little clearer. We have a number of sites in different countries. Recently email was impacted at one of the sites, but it could have been a complete network outage. Information was provided by phone to local IT managers at the site but onward communication was slower than some would have liked. It seems like almost everyone at the site has a personal mobile phone which could receive text messages, and perhaps access a remote website with postings on the situation. However managing and supporting a system to text people on these relatively infrequent occasions would be very costly to do internally. What are other people doing to handle situations like this? Some things I've thought of include: Database of phone numbers to text. Seems costly and not very easy to maintain for an already stretched IT group. Is there an external service that would let you do this policies? Send voicemail message to all phones on site. Maintain an external website. This would not work in all situations (network failure), and there is a limit on the amount of info that can be posted externally. A site outage could be sensitive information in some situations. How could the site be password protected? Maybe OpenId/Facebook connect would work. Use a site like Yammer.com which is publicly accessible but only by people with a company email address. Anyone using this for IT outage notifications? To me it looks like there is no clear answer, and that there are solutions for some subsets of users. To be comprehensive a number of solutions would need to be combined. Any additional thoughts or recommendations? What worked or didn't work for your organization?

  Read the article

• Password Reset Self Service Portal

  - by Corey

  I’m looking for an affordable solution to offer a “self-service” password reset portal on the web for my active directory users. (about 150 of them) Many of them don’t use Windows workstations and therefore can’t reset there own password. I’ve been Googling, and have found so many options, that I’m not sure how to sort them all out. Has anyone had positive (or negative) experiences with any particular products?

  Read the article

• Recovering data from an external hard drive

  - by CCallaghan

  I have a WD Elements 2GB hard drive (formatted NTFS). I accidentally kicked out the USB cable while writing data to the disk, and now I can't access most of the data. Although this was ostensibly my backup drive, there is a great deal of important material on there which was only on there. I realise how idiotic this makes me. (So, formatting is not an option.) Things I've tried/information I've gathered: Windows Explorer will recognise the drive itself. However, it will not access most directories therein (and will sometimes crash when exploring). I can access all of the directories through the command line, but the dir command will often report that it can't read any files in most of the directories. The situation was similar when I hooked it up to an Ubuntu machine: the file explorer crashed, but I could access directories - but not files in those directories - via terminal commands. Several files I tried to copy out either resulted in an I/O error being reported or resulted in the command line crashing. The Disk Management utility on Windows reports a healthy disk formatted as NTFS and not RAW. It also indicates the correct amount of space used up and its capacity (so it seems that the files are not deleted). I've tried to run chkdsk, but that hangs on Step 2 (checking indexes) at 74%. Step 1 reported no bad sectors. I tried Recuva, but that didn't seem to work (stalled at 0% for half an hour). I should also note that the disk doesn't seem to be spinning smoothly; it seems to be chopping back, like it's reading the same sector over and over again. I noticed this after I kicked out the cable. Any help would be greatly appreciated. Update: It would seem the problem has taken a turn for the worse. The external hard drive now shows up on my computer as a local disk and is not mountable by Linux.

  Read the article

• Recovered video files won't play

  - by BioGeek

  I have an SD card with pictures and video which malfunctioned. I was able to recover the files with Photorec. The pictures are OK, but wen I try to open the vide files (*.mov extension) in get the following errors when I try to open them in the following programs Windows Media player: "Windows Media Player encountered a problem while playing the file" Quicktime: "Error -2048: Couldn't open the file because it is not a file that QuickTime understands" VLC: it shows the first frame of the video and the sound is just white noise The filesizes look correct so I presume the data is still in there. Is there any way to fix these recovered video files?

  Read the article

• Password Reset Self Service Portal

  - by Corey

  I’m looking for an affordable solution to offer a “self-service” password reset portal on the web for my active directory users. (about 150 of them) Many of them don’t use Windows workstations and therefore can’t reset there own password. I’ve been Googling, and have found so many options, that I’m not sure how to sort them all out. Has anyone had positive (or negative) experiences with any particular products?

  Read the article

• Recovering database files from a corrupted VHD

  - by Apocalypse9

  We have a SQL server hosted on a virtual machine. Our hosting company updated/restarted the server and for some reason the virtual machines became unbootable. We've spoken to Microsoft and used a few higher level tools to attempt to recover the virtual machines but were unsuccessful. In browsing the file system the database folder doesn't even appear. I'm wondering if there are any lower level tools that might be able to find and copy the database files. As far as I know the physical hard drive is ok, so I'm hoping there may be some way to recover the files themselves even if the rest of the virtual machine file-system is a loss. Obviously we're in a bit of a bind, and any help/ suggestions are very much appreciated.

  Read the article

• Accidentally deleted the software for MyPassport Essential SE 1TB Hardrive

  - by user26192

  Hi, I'm posting for a friend of mine. She bought a WD MyPassport Essential SE 1 TB Hard drive the other day. When she plugged in the USB in her lap top, the driver cannot be recognized by the smart ware software. While she was doing a back up of her files, McAfee was running in the background. Since the backup was taking so long to finish, she decided to pause it. She tried to delete the partially backed up files, but instead, she accidentally deleted the entire file in the folder including the pre-installed software. Now, when she tries to start up the MyPassport, the smart ware doesn't show up anymore. Can someone please give us advice what can she do about this? Thank you.

  Read the article

• My hard disk does't get recognized

  - by SteveL

  For a few days now I have a problem with my 500GB internal hard disk. I am on Linux Mint 13 but I have the same problem with my Windows installation. When running fdisk -l I can see my hard disk (same on BIOS) but I can't mount it even via the disk utility program. In Windows XP I can see it on the My Computer menu but when I click it, it say's: D:\ is not accessible The file or directory is corrupted and unreadable Is there a way to fix it? Or at least save some of my files and format it? Should I be thinking about the worst-case scenario e.g. my HDD is dead? Edit: The filesystem is NTFS.

  Read the article

• Computer hanged in the middle of bios flashing process

  - by Stalker

  I have a laptop: Toshiba Satellite c660-17j, today I decided to update BIOS. I've downloaded bios updater from manufacturer's web site, and in the middle of flashing process computer hanged. I was waiting more than 30 minutes, but nothing was changed on the screen, i've tryed to PRESS MORE BUTTONS, but there were no reactions, so i've turned it off by removing battery (all other methods failed, even pressing power button for ~10 secs). After that computer can't start. I understand, that there's MESS in BIOS chip, and it's possible to re-flash it with hardware programmer, but I don't have it. I remember, that on some PCs (even on my eeepc) there was possibility to re-flash bios by inserting usb flash-disk (with .dat file on it, which contained BIOS), and power on PC, while holding some keys combination, then PC was switching to BIOS programming mode and re-flashed BIOS, after that it was possible to boot up normaly. Is there a way to recover computer without hardware programming BIOS chip? p.s. sorry for my english.

  Read the article

• Best alternatives to recover lost directories in FAT32 external hard drive?

  - by Sergio

  I have an 320 GB ADATA CH91 external hard drive. I guess it has some problems with the connector of the USB jack. The point is that in certain occasions it fails in write operations generating data losses. Right now I lost a directory with several GB's of very useful information. Since then I have not attempted to write to the disk any more. What tool would you recommend to recover the lost data? The disk is FAT32 formatted (only one partition) and I use both Linux and Windows. What filesystem format would you recommend to avoid future data losses? I currently only use this external hard drive in Linux so there are several available choices (FAT, NTFS, ext3, ext4, reiser, etc.).

  Read the article

• How to recover data from a partially overwritten partition

  - by shredder12

  By mistake, I configured a 900GB partition to be part of a 50GB raid. The sync is complete and my understanding is that only the first 50GB of the bigger partition is overwritten. How do I recover the rest of the data? When I try to mount this partition by identifying it as ext3, it mounts only the 50GB overwritten space. This partition was earlier divided into various logical volumes(all ext3 filesystems) through LVM. Any suggestions?

  Read the article

• Strange Lose Of Format On Pen Drive

  - by Kiewic

  Hi, here is an screenshot of my pen drive. The files are impossible to open, and the names has been replaced by strange characters. In Ubuntu is worst, the windows system crash. What can I do to recover my information?

  Read the article

• External Hard Drive needs format problem

  - by Saher

  I recently bought a new ADATA external Classic hard drive 500GB. I have transferred around 29GB of data on it till I install my new windows 7 operating system. After some work with the hard drive (copying / deleting ... files) . I closed it for some reason and it couldn't open again asking me to format. I don't want to format the hard drive, I have important data I need...Is there a way I can retrieve my data. Is Recover My Files program from GetData a right choice??? part 2 of my question: why might such thing happen (require format to open), is it the hard drive problem or is it just a corrupted file or folder...??? Thanks,

  Read the article

• Need help recovering a corrupt SQL database

  - by user570079

  I have a very special case that I have been working on for several days. I have a very large SQL Server 2008 database (about 2 TB) that contains 500 filegroups to support very large partitioned tables. Recently we had a catastophic failure on one of the drive and lost several filegroups and the database became in-accessible. We have been doing filegroup backups on a daily basis, but due to other issues, we lost our most recent backup of the log and the primary filegroup. We have all the data backed up but the primary filegroup backup is old. There have been no schema changes since the primary filegroup backup, but the lsn's are now all out of sync and we cannot recover the data. I have tried everything I could think of (and have tried just about every trick and hack I could google) but I still end up at the same point where I get messages saying that the files for filegroup x do not match the primary filegroup. I am now at the point of trying to edit the system tables (we have a separate temporary environment to do this so we are not worried about corrupting any production databases). I have tried updated sys.sysdbreg, sys.sysbrickfiles, and sys.sysprufiles to try to trick SQL into thinking all the files are online, but a "Select * From OPENROWSET(TABLE DBPROP, 5)" shows a different database state from what I see in sys.sysdbreg. I am now thinking I need to somehow edit the headers of the actual data files to try to line up the lsn's with the primary. I appreciate any help anyone can give me here, but please do not respond with things like "you are not supposed to do edit mdf, ndf files...." or "see msdn article....", etc. This is an advanced emergency case and I need a real hack so we can just get to the data in this corrupt database and export to a fresh new database. I know there is a way to do this, but not knowing what the DBPROP system functions does (i.e. does it look at system tables or does it actually open the file) is keeping me from trying to figure out how to fool SQL into allowing me to read these files. Thanks for any help.

  Read the article

• How do I recover my router password without resetting it?

  - by Pacerier

  I want to know the password of my router. The default username and pass isn't working. I've read this thread i forgot my wireless router password. what do i do . . however it tells me to reset the router (I do not wish to reset the router to factory settings) This is my router: Linksys Wireless-N Home Router WRT120N I'm thinking there's some way we could get the password (or bypass the need to) that we need to enter 192.168.1.1?

  Read the article

• Help in recovering partition

  - by goshopedero

  Okay so i had one NTFS partition and i wanted to resize it, but while resizing it with partition magic some error occurred and now i am not able to enter in my partition anymore. I have slackware 13 also and i tried mounting the partition from there but it didn't succeed. One friend of mine came to my house with some live-cd os called backtrack3 and when he booted from cd, he was able to mount the damaged partition - and was able to read/write on it anywhere. I saw my files, they are all there, so nothing's erased just the partition is somehow damaged. But strange thing was that from backtrack we weren't able to mount some of the working partitions of my comp, and we could mount the damaged one. So i am asking for some help here: My files are all there, and i saw them from backtrack. What can i do to fix the partition so it would be usable from windows/slackware again ? Please tell me anything you've got because i have some important data on it. Thank you.

  Read the article

• Is there a good, free way to fix broken/corrupt .wmv files?

  - by chbtn

  I've recovered some files from an hdd that weren't supposed to be deleted in the first place, but they have seeking problems/crash the players. Since they have the right size, I'm thinking it might be a problem of corrupt index/header, so I'm trying to find a way to fix them. It's easy to find examples on how to fix corrupt .avi files with mencoder, but .wmv seems trickier. Also, I realize there might not be a way to fix these files, but I figure I might as well as try. As far as players go, I've tried opening it with vlc/mplayer/windows media player. I can use anything on Windows XP/7 and Ubuntu, as long as it's free. Since the files are 200mb+ and there are quite a few, I don't think trial software would work.

  Read the article

• My Windows 7 computer won't boot up and a BSOD keeps coming up; how do I solve it?

  - by opj

  Whenever I boot my Windows 7 computer, I get a blue screen of death with the following details: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart you computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Technical Information: * STOP: 0x0000007B (0xFFFFF880009A98E8,0xFFFFFFFFC000000D,0x0000000000000000,0x0000000000000000) What does this mean, and how can I fix it so I can boot my machine once again?

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >