Search Results

Search found 1586 results on 64 pages for 'restarting'.

Page 61/64 | < Previous Page | 57 58 59 60 61 62 63 64  | Next Page >

• Unable to setup postgres on ubuntu (8.4 on 9.10)

  - by shabda

  I am trying to setup postgres on ubuntu, and I cant proceed as I cant find the location of pg_hba.conf (Postgres 8.4 on ubuntu 9.10) What I did setup postgres via aptitude This gave me ... /usr/share/postgresql/8.4# aptitude install postgresql Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following NEW packages will be installed: libreadline5{a} postgresql postgresql-8.4{a} postgresql-client-8.4{a} postgresql-client-common{a} postgresql-common{a} 0 packages upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/5,159kB of archives. After unpacking 18.8MB will be used. Do you want to continue? [Y/n/?] Y Writing extended state information... Done Preconfiguring packages ... Selecting previously deselected package libreadline5. (Reading database ... 17490 files and directories currently installed.) Unpacking libreadline5 (from .../libreadline5_5.2-6_amd64.deb) ... Selecting previously deselected package postgresql-client-common. Unpacking postgresql-client-common (from .../postgresql-client-common_101_all.deb) ... Selecting previously deselected package postgresql-client-8.4. Unpacking postgresql-client-8.4 (from .../postgresql-client-8.4_8.4.1-1_amd64.deb) ... Selecting previously deselected package postgresql-common. Unpacking postgresql-common (from .../postgresql-common_101_all.deb) ... Selecting previously deselected package postgresql-8.4. Unpacking postgresql-8.4 (from .../postgresql-8.4_8.4.1-1_amd64.deb) ... Selecting previously deselected package postgresql. Unpacking postgresql (from .../postgresql_8.4.1-1_all.deb) ... Processing triggers for man-db ... Setting up libreadline5 (5.2-6) ... Setting up postgresql-client-common (101) ... Setting up postgresql-client-8.4 (8.4.1-1) ... update-alternatives: using /usr/share/postgresql/8.4/man/man1/psql.1.gz to provide /usr/share/man/man1/psql.1.gz (psql.1.gz) in auto mode. Setting up postgresql-common (101) ... Setting up postgresql-8.4 (8.4.1-1) ... update-alternatives: using /usr/share/postgresql/8.4/man/man1/postmaster.1.gz to provide /usr/share/man/man1/postmaster.1.gz (postmaster.1.gz) in auto mode. Setting up postgresql (8.4.1-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Writing extended state information... Done tried to login as su - postgres Followed by createdb mytestdb This failed with could not connect to database postgres: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? So I though I need to enable local connections in pg_hba.conf, which I cant find. So I created a new file as sudo vim /etc/postgresql/8.4/main/pg_hba.conf With values local all all ident But I still cant login after restarting the service. What are next steps for me to take.

  Read the article

• sendmail can not relay from itself

  - by Bernie

  I am running 3 centos 5.2 servers and I have configured the server for forward all messages to root to be emailed to me via .forward rule. This is working fine on two of the servers but not on the third. I have also tried copying the mail config files from the backup server and placing them on the file server and restarting sendmail. I also removed and reinstalled sendmail via yum but the results are the same. I am not sure what the issue could be they are all standard centos installs. Here is an example from the backup server which is working and the fileserver which isn't I am also going to include the mail log. good from backup server [root@backup ]# sendmail -v [email protected] < test.mail [email protected]... Connecting to [127.0.0.1] via relay... 220 backup.localhost ESMTP Sendmail 8.13.8/8.13.8; Fri, 16 Oct 2009 10:23:50 -0700 >>> EHLO backup.localhost 250-backup.localhost Hello backup.localhost [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 250-DSN 250-ETRN 250-DELIVERBY 250 HELP >>> MAIL From:<[email protected]> SIZE=73 250 2.1.0 <[email protected]>... Sender ok >>> RCPT To:<[email protected]> >>> DATA 250 2.1.5 <[email protected]>... Recipient ok 354 Enter mail, end with "." on a line by itself >>> . 250 2.0.0 n9GHNoGC020924 Message accepted for delivery [email protected]... Sent (n9GHNoGC020924 Message accepted for delivery) Closing connection to [127.0.0.1] >>> QUIT 221 2.0.0 backup.localhost closing connection bad from file server [root@fileserver bernie]# sendmail -v [email protected] < test.mail [email protected]... Connecting to [127.0.0.1] via relay... 220 fileserver.localhost ESMTP Sendmail 8.13.8/8.13.8; Fri, 16 Oct 2009 10:23:26 -0700 >>> EHLO fileserver.localhost 250-fileserver.localhost Hello fileserver.localhost [127.0.0.1], pleased to meet you 250 ENHANCEDSTATUSCODES >>> MAIL From:<[email protected]> 550 5.0.0 Access denied root... Using cached ESMTP connection to [127.0.0.1] via relay... >>> RSET 250 2.0.0 Reset state >>> MAIL From:<> 550 5.0.0 Access denied postmaster... Using cached ESMTP connection to [127.0.0.1] via relay... >>> RSET 250 2.0.0 Reset state >>> MAIL From:<> 550 5.0.0 Access denied Closing connection to [127.0.0.1] >>> QUIT 221 2.0.0 fileserver.localhost closing connection mail log Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDom028059: from=root, size=72, class=0, nrcpts=1, msgid=<[email protected]>, relay=root@localhost Oct 16 10:39:13 fileserver sendmail[28060]: n9GHdDwl028060: tcpwrappers (fileserver.localhost, 127.0.0.1) rejection Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDom028059: [email protected], ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30072, relay=[127.0.0.1] [127.0.0.1], dsn=5.0.0, stat=Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDom028059: n9GHdDon028059: DSN: Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDon028059: to=root, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31096, relay=[127.0.0.1], dsn=5.0.0, stat=Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDon028059: n9GHdDoo028059: return to sender: Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDoo028059: to=postmaster, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=32120, relay=[127.0.0.1], dsn=5.0.0, stat=Service unavailable Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDon028059: Losing ./qfn9GHdDon028059: savemail panic Oct 16 10:39:13 fileserver sendmail[28059]: n9GHdDon028059: SYSERR(root): savemail: cannot save rejected email anywhere

  Read the article

• Weird networking problem ( Linksys, Windows 7 )

  - by Rohit Nair

  Okay it's a bit tough to figure out where to start from, but here is the basic summary of the issue: During general internet usage, there are times when any attempt to visit a website stalls at "Waiting for somedomain.com". This problem occurs in Firefox, IE and Chrome. No website will load, INCLUDING the router configuration page at 192.168.1.1. Curiously, ping works fine, and other network apps such as MSN Messenger continue to work and I can send and receive messages. Disconnecting and reconnecting to the wireless network seems to fix the problem for a bit, but there are times when it relapses into not loading after every 2-3 http requests. Restarting the router seems to fix the issue, but it can crop up hours or days later. I have a CCNA cert and I know my way around the Windows family of operating systems, so I'm going to list all the things I've tried here. Other computers on the network seem to suffer the same problem, which makes me think it might be a specific problem with something in Win7. The random nature of this issue makes it a bit difficult to confirm, but I can definitely say that I have experienced this on the following systems: Windows 7 64-bit on my desktop Windows Vista 32-bit on my desktop ( the desktop has 2 wireless NICs and the problem existed on both ) Windows Vista 32-bit on my laptop ( both with wireless and wired ) Windows XP SP3 on another laptop ( both wireless and wired ) Using Wireshark to sniff packets seemed to indicate that although HTTP requests were being SENT out, no packets were coming in to respond to the HTTP request. However, other network apps continued to work i.e I would still receive IMs on Windows Live Messenger. Disabling IPV6 had no effect. Updating router firmware to the latest stock firmware by Linksys had no effect. Switching to dd-wrt firmware had no effect. By "no effect" I mean that although the restart required by firmware updates fixed the problem at the time, it still came back. A couple of weeks back, after a LOT of googling and flipping of various options, I figured it might be a case of router slowdown ( http://www.dd-wrt.com/wiki/index.php/Router%5FSlowdown ) caused by the fact that I occasionally run a torrent client. I tried changing the configuration as suggested in that router slowdown link, and restarted the router. However I have not run the torrent client for 12 days now, and yet I still randomly experience this problem. Currently the computer I am using is running Windows 7 64-bit. I would just like to reiterate some of the reasons that I was confused by the issue. Even the router config page at 192.168.1.1 would not load, indicating that it's not a problem with the WAN link, but probably a router issue or a local computer issue. For some reason, disconnecting and reconnecting to the wireless network immediately seems to fix the problem. Updating the router firmware, even switching to open source firmware did nothing. So it seemed to be a computer issue. On the other hand, I have not seen any mass outrage of people having networking problems with Windows 7 and Linksys routers, especially a problem of this sort, and I have tweaked every network setting I could think of. Although HTTP seems to have trouble, ping works fine, DNS lookups work fine, other networking apps work fine. However if I disconnect from Windows Live Messenger and try to reconnect, it fails to reconnect. So although it could receive data over the existing TCP/IP connection, trying to start a new one failed? Does anyone have any further ideas on debugging or fixing this issue? I am reasonably certain there are no viruses or other malicious apps on my network, and I am also reasonably certain that nobody is accessing my router without my consent. Router: Linksys WRT54G2 1.0 running dd-wrt firmware Wireless Card: Alfa AWUS036H OS: Windows 7 64-bit EDIT: I tried switching to a clean wireless channel free from interference, but the problem still persisted. I tried connecting directly with a cable, but the problem still persisted. Signed A very confused and bewildered geek whose knowledge seems to be useless in the face of this frustrating network issue.

  Read the article

• Delaying NIS & NFS startup till after network interface is fully ready on Fedora 17

  - by obmarg

  I've recently set up a fedora 17 server for our network, and I've been having trouble getting the NIS service to work on startup. Here's some logs from the system: Aug 21 12:57:12 cairnwell ypbind-pre-setdomain[718]: Setting NIS domain: 'indigo-nis' (environment variable) Aug 21 12:57:13 cairnwell ypbind: Binding NIS service Aug 21 12:57:13 cairnwell rpc.statd[730]: Unable to prune capability 0 from bounding set: Operation not permitted Aug 21 12:57:13 cairnwell systemd[1]: nfs-lock.service: control process exited, code=exited status=1 Aug 21 12:57:13 cairnwell systemd[1]: Unit nfs-lock.service entered failed state. Aug 21 12:57:14 cairnwell setroubleshoot: SELinux is preventing /usr/sbin/rpc.statd from using the setpcap capability. For complete SELinux messages. run sealert -l 024bba8a-b0ef-43dc-b195-5c9a2d4c4d41 Aug 21 12:57:15 cairnwell kernel: [ 18.822282] bnx2 0000:02:00.0: em1: NIC Copper Link is Up, 1000 Mbps full duplex Aug 21 12:57:15 cairnwell kernel: [ 18.822925] ADDRCONF(NETDEV_CHANGE): em1: link becomes ready Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): carrier now ON (device state 20) Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> Auto-activating connection 'System em1'. Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> Activation (em1) starting connection 'System em1' Aug 21 12:57:15 cairnwell NetworkManager[621]: <info> (em1): device state change: disconnected -> prepare (reason 'none') [30 40 0] ....... Aug 21 12:57:19 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:26 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:31 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:57:35 cairnwell sendmail[790]: YPBINDPROC_DOMAIN: Domain not bound Aug 21 12:58:00 cairnwell ypbind: Binding took 47 seconds Aug 21 12:58:00 cairnwell ypbind: NIS server for domain indigo-nis is not responding. Aug 21 12:58:01 cairnwell ypbind: Killing ypbind with PID 733. Aug 21 12:58:01 cairnwell ypbind-post-waitbind[734]: /usr/lib/ypbind/ypbind-post-waitbind: line 51: kill: SIGTERM: invalid signal specification Aug 21 12:58:01 cairnwell systemd[1]: ypbind.service: control process exited, code=exited status=1 Aug 21 12:58:01 cairnwell systemd[1]: Unit ypbind.service entered failed state. By the looks of these logs the ypbind service is starting up at 12:57:12 but the network interface isn't coming up till 12:57:15. My guess is that this is causing ypbind to time out when trying to connect. As a knock-on effect the NIS failure is causing problems with NFS which is no longer able to map UIDs properly. This problem doesn't seem to be fixed by actually starting ypbind etc. so I've had to set all my NFS shares to noauto. I have tried manually adding NETWORKDELAY and NETWORKWAIT in /etc/sysconfig/network and also running systemctl enable NetworkManager-wait-online.service as I've seen suggested in some places, but neither of these have had any effect. It is relatively easy to fix manually by restarting ypbind & mounting NFS shares after the network has started up, but it's less than ideal to have to do this every time the server has been rebooted. Does anyone know of an easy (and preferably hack-free) way of delaying the ypbind startup till after the network interface is fully ready?

  Read the article

• Windows Azure VMs - New "Stopped" VM Options Provide Cost-effective Flexibility for On-Demand Workloads

  - by KeithMayer

  Originally posted on: http://geekswithblogs.net/KeithMayer/archive/2013/06/22/windows-azure-vms---new-stopped-vm-options-provide-cost-effective.aspxDidn’t make it to TechEd this year? Don’t worry!  This month, we’ll be releasing a new article series that highlights the Best of TechEd announcements and technical information for IT Pros.  Today’s article focuses on a new, much-heralded enhancement to Windows Azure Infrastructure Services to make it more cost-effective for spinning VMs up and down on-demand on the Windows Azure cloud platform. NEW! VMs that are shutdown from the Windows Azure Management Portal will no longer continue to accumulate compute charges while stopped! Previous to this enhancement being available, the Azure platform maintained fabric resource reservations for VMs, even in a shutdown state, to ensure consistent resource availability when starting those VMs in the future.  And, this meant that VMs had to be exported and completely deprovisioned when not in use to avoid compute charges. In this article, I'll provide more details on the scenarios that this enhancement best fits, and I'll also review the new options and considerations that we now have for performing safe shutdowns of Windows Azure VMs. Which scenarios does the new enhancement best fit? Being able to easily shutdown VMs from the Windows Azure Management Portal without continued compute charges is a great enhancement for certain cloud use cases, such as: On-demand dev/test/lab environments - Freely start and stop lab VMs so that they are only accumulating compute charges when being actively used.  "Bursting" load-balanced web applications - Provision a number of load-balanced VMs, but keep the minimum number of VMs running to support "normal" loads. Easily start-up the remaining VMs only when needed to support peak loads. Disaster Recovery - Start-up "cold" VMs when needed to recover from disaster scenarios. BUT ... there is a consideration to keep in mind when using the Windows Azure Management Portal to shutdown VMs: although performing a VM shutdown via the Windows Azure Management Portal causes that VM to no longer accumulate compute charges, it also deallocates the VM from fabric resources to which it was previously assigned.  These fabric resources include compute resources such as virtual CPU cores and memory, as well as network resources, such as IP addresses.  This means that when the VM is later started after being shutdown from the portal, the VM could be assigned a different IP address or placed on a different compute node within the fabric. In some cases, you may want to shutdown VMs using the old approach, where fabric resource assignments are maintained while the VM is in a shutdown state.  Specifically, you may wish to do this when temporarily shutting down or restarting a "7x24" VM as part of a maintenance activity.  Good news - you can still revert back to the old VM shutdown behavior when necessary by using the alternate VM shutdown approaches listed below.  Let's walk through each approach for performing a VM Shutdown action on Windows Azure so that we can understand the benefits and considerations of each... How many ways can I shutdown a VM? In Windows Azure Infrastructure Services, there's three general ways that can be used to safely shutdown VMs: Shutdown VM via Windows Azure Management Portal Shutdown Guest Operating System inside the VM Stop VM via Windows PowerShell using Windows Azure PowerShell Module Although each of these options performs a safe shutdown of the guest operation system and the VM itself, each option handles the VM shutdown end state differently. Shutdown VM via Windows Azure Management Portal When clicking the Shutdown button at the bottom of the Virtual Machines page in the Windows Azure Management Portal, the VM is safely shutdown and "deallocated" from fabric resources.  Shutdown button on Virtual Machines page in Windows Azure Management Portal  When the shutdown process completes, the VM will be shown on the Virtual Machines page with a "Stopped ( Deallocated )" status as shown in the figure below. Virtual Machine in a "Stopped (Deallocated)" Status "Deallocated" means that the VM configuration is no longer being actively associated with fabric resources, such as virtual CPUs, memory and networks. In this state, the VM will not continue to allocate compute charges, but since fabric resources are deallocated, the VM could receive a different internal IP address ( called "Dynamic IPs" or "DIPs" in Windows Azure ) the next time it is started.  TIP: If you are leveraging this shutdown option and consistency of DIPs is important to applications running inside your VMs, you should consider using virtual networks with your VMs.  Virtual networks permit you to assign a specific IP Address Space for use with VMs that are assigned to that virtual network.  As long as you start VMs in the same order in which they were originally provisioned, each VM should be reassigned the same DIP that it was previously using. What about consistency of External IP Addresses? Great question! External IP addresses ( called "Virtual IPs" or "VIPs" in Windows Azure ) are associated with the cloud service in which one or more Windows Azure VMs are running.  As long as at least 1 VM inside a cloud service remains in a "Running" state, the VIP assigned to a cloud service will be preserved.  If all VMs inside a cloud service are in a "Stopped ( Deallocated )" status, then the cloud service may receive a different VIP when VMs are next restarted. TIP: If consistency of VIPs is important for the cloud services in which you are running VMs, consider keeping one VM inside each cloud service in the alternate VM shutdown state listed below to preserve the VIP associated with the cloud service. Shutdown Guest Operating System inside the VM When performing a Guest OS shutdown or restart ( ie., a shutdown or restart operation initiated from the Guest OS running inside the VM ), the VM configuration will not be deallocated from fabric resources. In the figure below, the VM has been shutdown from within the Guest OS and is shown with a "Stopped" VM status rather than the "Stopped ( Deallocated )" VM status that was shown in the previous figure. Note that it may require a few minutes for the Windows Azure Management Portal to reflect that the VM is in a "Stopped" state in this scenario, because we are performing an OS shutdown inside the VM rather than through an Azure management endpoint. Virtual Machine in a "Stopped" Status VMs shown in a "Stopped" status will continue to accumulate compute charges, because fabric resources are still being reserved for these VMs.  However, this also means that DIPs and VIPs are preserved for VMs in this state, so you don't have to worry about VMs and cloud services getting different IP addresses when they are started in the future. Stop VM via Windows PowerShell In the latest version of the Windows Azure PowerShell Module, a new -StayProvisioned parameter has been added to the Stop-AzureVM cmdlet. This new parameter provides the flexibility to choose the VM configuration end result when stopping VMs using PowerShell: When running the Stop-AzureVM cmdlet without the -StayProvisioned parameter specified, the VM will be safely stopped and deallocated; that is, the VM will be left in a "Stopped ( Deallocated )" status just like the end result when a VM Shutdown operation is performed via the Windows Azure Management Portal.  When running the Stop-AzureVM cmdlet with the -StayProvisioned parameter specified, the VM will be safely stopped but fabric resource reservations will be preserved; that is the VM will be left in a "Stopped" status just like the end result when performing a Guest OS shutdown operation. So, with PowerShell, you can choose how Windows Azure should handle VM configuration and fabric resource reservations when stopping VMs on a case-by-case basis. TIP: It's important to note that the -StayProvisioned parameter is only available in the latest version of the Windows Azure PowerShell Module.  So, if you've previously downloaded this module, be sure to download and install the latest version to get this new functionality. Want to Learn More about Windows Azure Infrastructure Services? To learn more about Windows Azure Infrastructure Services, be sure to check-out these additional FREE resources: Become our next "Early Expert"! Complete the Early Experts "Cloud Quest" and build a multi-VM lab network in the cloud for FREE!  Build some cool scenarios! Check out our list of over 20+ Step-by-Step Lab Guides based on key scenarios that IT Pros are implementing on Windows Azure Infrastructure Services TODAY!  Looking forward to seeing you in the Cloud! - Keith Build Your Lab! Download Windows Server 2012 Don’t Have a Lab? Build Your Lab in the Cloud with Windows Azure Virtual Machines Want to Get Certified? Join our Windows Server 2012 "Early Experts" Study Group

  Read the article

• eth0 and eth1 both assigned same IP on boot

  - by Banjer

  I have a physical SLES 11 SP2 server on a Sun Fire x4140 that is giving me problems with networking upon reboot. The NICs are onboard. The networking appears successful during boot, but network services such as nfs fail hard. This is because eth0 and eth1 are both receiving the same configuration and are both ifup-ed. Once everything times out and I'm at the console, ifconfig shows that eth0 and eth1 are UP and running with the same IP. Attempting to ping anything in that subnet fails. Restarting the network service fixes the issue. eth0 is the correct NIC that should be configured as primary, per the MAC address. Question: Whats causing eth1 to be brought up with the same config as eth0?? I do not have a config script set up for eth1: banjer@harp:~> ls -la /etc/sysconfig/network/ total 104 drwxr-xr-x 6 root root 4096 Jun 11 12:21 . drwxr-xr-x 6 root root 4096 Apr 10 09:46 .. -rw-r--r-- 1 root root 13916 Apr 10 09:32 config -rw-r--r-- 1 root root 9952 Apr 10 09:36 dhcp -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth0 -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth3 -rw------- 1 root root 172 Feb 1 08:32 ifcfg-lo -rw-r--r-- 1 root root 29333 Feb 1 08:32 ifcfg.template drwxr-xr-x 2 root root 4096 Apr 10 09:32 if-down.d -rw-r--r-- 1 root root 239 Feb 1 08:32 ifroute-lo drwxr-xr-x 2 root root 4096 Apr 10 09:33 if-up.d drwx------ 2 root root 4096 May 5 2010 providers -rw-r--r-- 1 root root 25 Nov 16 2010 routes drwxr-xr-x 2 root root 4096 Apr 10 09:36 scripts On a side note, eth3 is also configured with an IP in a different subnet, but this has not posed any problems. FYI the kernel module being used is forcedeth. banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.21.64.25/20' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Here's eth3 in case you need to see it: banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth3 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.11.200.4/24' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Perhaps is something related to udev? 70-persistent-net-rules looks OK to me, but I may not understand it completely. banjer@harp:~> cat /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4d", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3" # PCI device 0x1077:0x3032 (qla3xxx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:c1:dd:0e:34:6c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4" Any other thoughts on what would cause this?

  Read the article

• Scenarios for Bazaar and SVN interaction

  - by Adam Badura

  At our company we are using SVN repository. I'm doing programming from both work (main place) and home (mostly experiments and refactoring). Those are two different machines, in different networks and almost never turned on at the same time (after all I'm either at work or at home...) I wanted to give a chance to some distributed version control system and solve some of the issues associated with SVN based process and having two machines. From git, Mercurial and Bazaar I chose to start with Bazaar since it claims that it is designed do be used by human beings. Its my first time with distributed system and having nice and easy user interface was important for me. Features I wanted to achieve were: Being able to update from SVN repository and commit to it. Being able to commit locally steps of my work on a task. Being able to have few separate tasks at the same time in their own local branches. Being able to share those branches between my work and home computer. As a means of transport between work and home computer I wanted to use a pen-drive. Company server will not work since I may not instal there anything. Neither will work a web service repository as I may not upload source code to web (especially if it would be public which seems to be a common case in free web services). This transport should be Bazaar-based (or what ever else I will end with) so it can be done more or less automatically but manual copying and pasting some folders or generating patch files (providing they would work - I have bad experience with patch files in SVN) would work as well if there is no better solution. Yet the pen-drive should only be used for transportation. I do not want to edit or build there. I tried following Bazaar guidelines for integration with SVN. But I failed. I tried both bzr svn-import and bzr checkout providing URL from my repository as both https://... and svn+https://.... In some cases it had some issues with certificates but the output specified argument to ignore them so I did that. Sometimes it asked me to log in (in other cases maybe it remembered... I don't know) which I did. All were running very slow (this could be our server issue) and at some point were interrupted due to connection interruption (this almost for sure is our server issue: it truncates the connection after some time). But since (as opposed to SVN) restarting starts a new rather than from point where it was interrupted I was unable to reach all the ~19000 revisions (ending usually somewhere around 150). What and how should I do with Bazaar? Is is possible to somehow import SVN repository from the local checkout (so that I do not suffer the connection truncation)? I was told that a colleague that used to work with us has done something similar (importing SVN repository with full history) with Mercurial like in no time. So I'm seriously considering now trying Mercurial even if only to see if that will work. But also what are your general guidelines to achieve the listed features?

  Read the article

• Have I pushed the limits of my current VPS or is there room for optimization?

  - by JRameau

  I am currently on a mediatemple DV server (basic) 512mb dedicated ram, this is a CentOS based VPS with Plesk and Virtuozzo. My experience with it from day 1 has been bad and I only could sooth my server issues with several caching "Band-aids," but my sites are not as small as they were a year ago either so the issues have worsen. I have 3 Drupal installs running on separate (plesk) domains, 1 of those drupal installs is a multisite, that consists of 5-6 sites 2 of those sites are bringing in actual traffic. Those caching "Band-aids" I mentioned are APC, which seemed to help alot initially, and Drupal's Boost, which is considered a poorman's Varnish, it makes all my pages static for anonymous users. Last 30day combined estimate on Google Ananlytics: 90k visitors 260k pageviews. Issue: alot of downtime, I am continually checking if my sites are up, and lately I have been finding it down more than 3 times daily. Restarting Apache will bring it back up, for some time. I have google search every error message and looked up ways to optimize my DV server, and I am beyond stump what is my next move. Is this server bad, have I hit a impossibly low restriction such as the 12mb kernel memory barrier (kmemsize), is it on my end, do I need to optimize some more? *I have provided as much information as I can below, any help or suggestions given will be appreciated Common Error messages I see in the log: [error] (12)Cannot allocate memory: fork: Unable to fork new process [error] make_obcallback: could not import mod_python.apache.\n Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 21, in ? import traceback File "/usr/lib/python2.4/traceback.py", line 3, in ? import linecache ImportError: No module named linecache [error] python_handler: no interpreter callback found. [warn-phpd] mmap cache can't open /var/www/vhosts/***/httpdocs/*** - Too many open files in system (pid ***) [alert] Child 8125 returned a Fatal error... Apache is exiting! [emerg] (43)Identifier removed: couldn't grab the accept mutex [emerg] (22)Invalid argument: couldn't release the accept mutex cat /proc/user_beancounters: Version: 2.5 uid resource held maxheld barrier limit failcnt 41548: kmemsize 4582652 5306699 12288832 13517715 21105036 lockedpages 0 0 600 600 0 privvmpages 38151 42676 229036 249036 0 shmpages 16274 16274 17237 17237 2 dummy 0 0 0 0 0 numproc 43 46 300 300 0 physpages 27260 29528 0 2147483647 0 vmguarpages 0 0 131072 2147483647 0 oomguarpages 27270 29538 131072 2147483647 0 numtcpsock 21 29 300 300 0 numflock 8 8 480 528 0 numpty 1 1 30 30 0 numsiginfo 0 1 1024 1024 0 tcpsndbuf 648440 675272 2867477 4096277 1711499 tcprcvbuf 301620 359716 2867477 4096277 0 othersockbuf 4472 4472 1433738 2662538 0 dgramrcvbuf 0 0 1433738 1433738 0 numothersock 12 12 300 300 0 dcachesize 0 0 2684271 2764800 0 numfile 3447 3496 6300 6300 3872 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 14 14 200 200 0 TOP: (In January the load avg was really high 3-10, I was able to bring it down where it is currently is by giving APC more memory play around with) top - 16:46:07 up 2:13, 1 user, load average: 0.34, 0.20, 0.20 Tasks: 40 total, 2 running, 37 sleeping, 0 stopped, 1 zombie Cpu(s): 0.3% us, 0.1% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.0% hi, 0.0% si Mem: 916144k total, 156668k used, 759476k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached MySQLTuner: (after optimizing every table and repairing any table with overage I got the fragmented count down to 86) [--] Data in MyISAM tables: 285M (Tables: 1105) [!!] Total fragmented tables: 86 [--] Up for: 2h 44m 38s (409K q [41.421 qps], 6K conn, TX: 1B, RX: 174M) [--] Reads / Writes: 79% / 21% [--] Total buffers: 58.0M global + 2.7M per thread (100 max threads) [!!] Query cache prunes per day: 675307 [!!] Temporary tables created on disk: 35% (7K on disk / 20K total)

  Read the article

• Creating an SMF service for mercurial web server

  - by Chris W Beal

  I'm working on a project at the moment, which has a number of contributers. We're managing the project gate (which is stand alone) with mercurial. We want to have an easy way of seeing the changelog, so we can show management what is going on.  Luckily mercurial provides a basic web server which allows you to see the changes, and drill in to change sets. This can be run as a daemon, but as it was running on our build server, every time it was rebooted, someone needed to remember to start the process again. This is of course a classic usage of SMF. Now I'm not an experienced person at writing SMF services, so it took me 1/2 an hour or so to figure it out the first time. But going forward I should know what I'm doing a bit better. I did reference this doc extensively. Taking a step back, the command to start the mercurial web server is $ hg serve -p <port number> -d So we somehow need to get SMF to run that command for us. In the simplest form, SMF services are really made up of two components. The manifest Usually lives in /var/svc/manifest somewhere Can be imported from any location The method Usually live in /lib/svc/method I simply put the script straight in that directory. Not very repeatable, but it worked Can take an argument of start, stop, or refresh Lets start with the manifest. This looks pretty complex, but all it's doing is describing the service name, the dependencies, the start and stop methods, and some properties. The properties can be by instance, that is to say I could have multiple hg serve processes handling different mercurial projects, on different ports simultaneously Here is the manifest I wrote. I stole extensively from the examples in the Documentation. So my manifest looks like this $ cat hg-serve.xml <?xml version="1.0"?> <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type='manifest' name='hg-serve'> <service name='application/network/hg-serve' type='service' version='1'> <dependency name='network' grouping='require_all' restart_on='none' type='service'> <service_fmri value='svc:/milestone/network:default' /> </dependency> <exec_method type='method' name='start' exec='/lib/svc/method/hg-serve %m' timeout_seconds='2' /> <exec_method type='method' name='stop' exec=':kill' timeout_seconds='2'> </exec_method> <instance name='project-gate' enabled='true'> <method_context> <method_credential user='root' group='root' /> </method_context> <property_group name='hg-serve' type='application'> <propval name='path' type='astring' value='/src/project-gate'/> <propval name='port' type='astring' value='9998' /> </property_group> </instance> <stability value='Evolving' /> <template> <common_name> <loctext xml:lang='C'>hg-serve</loctext> </common_name> <documentation> <manpage title='hg' section='1' /> </documentation> </template> </service> </service_bundle> So the only things I had to decide on in this are the service name "application/network/hg-serve" the start and stop methods (more of which later) and the properties. This is the information I need to pass to the start method script. In my case the port I want to start the web server on "9998", and the path to the source gate "/src/project-gate". These can be read in to the start method. So now lets look at the method scripts $ cat /lib/svc/method/hg-serve #!/sbin/sh # # # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. # # Standard prolog # . /lib/svc/share/smf_include.sh if [ -z $SMF_FMRI ]; then echo "SMF framework variables are not initialized." exit $SMF_EXIT_ERR fi # # Build the command line flags # # Get the port and directory from the SMF properties port=`svcprop -c -p hg-serve/port $SMF_FMRI` dir=`svcprop -c -p hg-serve/path $SMF_FMRI` echo "$1" case "$1" in 'start') cd $dir /usr/bin/hg serve -d -p $port ;; *) echo "Usage: $0 {start|refresh|stop}" exit 1 ;; esac exit $SMF_EXIT_OK This is all pretty self explanatory, we read the port and directory using svcprop, and use those simply to run a command in the start case. We don't need to implement a stop case, as the manifest says to use "exec=':kill'for the stop method. Now all we need to do is import the manifest and start the service, but first verify the manifest # svccfg verify /path/to/hg-serve.xml If that doesn't give an error try importing it # svccfg import /path/to/hg-serve.xml If like me you originally put the hg-serve.xml file in /var/svc/manifest somewhere you'll get an error and told to restart the import service svccfg: Restarting svc:/system/manifest-import The manifest being imported is from a standard location and should be imported with the command : svcadm restart svc:/system/manifest-import # svcadm restart svc:/system/manifest-import and you're nearly done. You can look at the service using svcs -l # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled false state disabled next_state none state_time Thu May 31 16:11:47 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15749 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) And look at the interesting properties # svcprop hg-serve hg-serve/path astring /src/project-gate hg-serve/port astring 9998 ...stuff deleted.... Then simply enable the service and if every things gone right, you can point your browser at http://server:9998 and get a nice graphical log of project activity. # svcadm enable hg-serve # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled true state online next_state none state_time Thu May 31 16:18:11 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15858 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) None of this is rocket science, but a bit fiddly. Hence I thought I'd blog it. It might just be you see this in google and it clicks with you more than one of the many other blogs or how tos about it. Plus I can always refer back to it myself in 3 weeks, when I want to add another project to the server, and I've forgotten how to do it.

  Read the article

• virturalmin webmin dose not respond

  - by Miranda

  I have installed Virtualmin on a CentOS remote server, but it dose not seem to work https://115.146.95.118:10000/ at least the Webmin page dose not work. I have opened those ports http ALLOW 80:80 from 0.0.0.0/0 ALLOW 443:443 from 0.0.0.0/0 ssh ALLOW 22:22 from 0.0.0.0/0 virtualmin ALLOW 20000:20000 from 0.0.0.0/0 ALLOW 10000:10009 from 0.0.0.0/0 And restarting Webmin dose not solve it: /etc/rc.d/init.d/webmin restart Stopping Webmin server in /usr/libexec/webmin Starting Webmin server in /usr/libexec/webmin And I have tried to use Amazon EC2 this time, still couldn't get it to work. http://ec2-67-202-21-21.compute-1.amazonaws.com:10000/ [ec2-user@ip-10-118-239-13 ~]$ netstat -an | grep :10000 tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN udp 0 0 0.0.0.0:10000 0.0.0.0:* [ec2-user@ip-10-118-239-13 ~]$ sudo iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:20 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:21 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:10000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Since I need more than 10 reputation to post image, you can find the screenshots of the security group setting at the Webmin Support Forum. I have tried: sudo iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT It did not change anything. [ec2-user@ip-10-118-239-13 ~]$ sudo yum install openssl perl-Net-SSLeay perl-Crypt-SSLeay Loaded plugins: fastestmirror, priorities, security, update-motd Loading mirror speeds from cached hostfile * amzn-main: packages.us-east-1.amazonaws.com * amzn-updates: packages.us-east-1.amazonaws.com amzn-main | 2.1 kB 00:00 amzn-updates | 2.3 kB 00:00 Setting up Install Process Package openssl-1.0.0j-1.43.amzn1.i686 already installed and latest version Package perl-Net-SSLeay-1.35-9.4.amzn1.i686 already installed and latest version Package perl-Crypt-SSLeay-0.57-16.4.amzn1.i686 already installed and latest version Nothing to do [ec2-user@ip-10-118-239-13 ~]$ nano /etc/webmin/miniserv.conf GNU nano 2.0.9 File: /etc/webmin/miniserv.conf port=10000 root=/usr/libexec/webmin mimetypes=/usr/libexec/webmin/mime.types addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ppath= ssl=1 env_WEBMIN_CONFIG=/etc/webmin env_WEBMIN_VAR=/var/webmin atboot=1 logout=/etc/webmin/logout-flag listen=10000 denyfile=\.pl$ log=1 blockhost_failures=5 blockhost_time=60 syslog=1 session=1 server=MiniServ/1.585 userfile=/etc/webmin/miniserv.users keyfile=/etc/webmin/miniserv.pem passwd_file=/etc/shadow passwd_uindex=0 passwd_pindex=1 passwd_cindex=2 passwd_mindex=4 passwd_mode=0 preroot=virtual-server-theme passdelay=1 sessiononly=/virtual-server/remote.cgi preload= mobile_preroot=virtual-server-mobile mobile_prefixes=m. mobile. anonymous=/virtualmin-mailman/unauthenticated=anonymous ssl_cipher_list=ECDHE-RSA-AES256-SHA384:AES256-SHA256:AES256-SHA256:RC4:HIGH:MEDIUM:+TLSv1:!MD5:!SSLv2:+SSLv3:!ADH:!aNULL:!eNULL:!NULL:!DH:!ADH:!EDH:!AESGCM

  Read the article

• How to restore Linode to Vagrant VM?

  - by Iain Elder

  I'm trying to set up a Linux development environment so I can safely make changes to my website without breaking the live site. Linode hosts my live site. A simple solution would be to host my development server on Linode as well, but I want to avoid doubling my hosting costs. The cheapest way I see is to use Vagrant on my Windows workstation to host my development environment. After I attempt to restore the backup to Vagrant and reboot the VM, I can no longer ssh into the Vagrant host. It's probably because by restoring the backup I overwrite some special Vagrant configuration, but I'm not sure how to avoid that. How do I make this approach work? If my approach is fundamentally wrong, can you suggest an alternative? Creating the backup On the Linode I used these commands to create a compressed copy of the entire filesystem, while ignoring things that shouldn't be included in the backup: $ sudo rsync -ahvz --exclude={/dev/*,/proc/*,/sys/*,/tmp/*,/run/*,/mnt/*,/backup/*} /* /backup/2 $ sudo tar -czf /backup/2.gz /backup/2 The backup file is called 2.gz because this is thesecond backup. The first backup is called 1.gz. I use WinSCP to copy the backup file to my Windows workstation. Setting up the Vagrant host I need a Vagrant box that matches my Linode operating system (Ubuntu 12.04.3 LTS, kernel 3.9.3). I selected the closet match from vagrantbox.es: Ubuntu Server Precise 12.04.3 amd64 Kernel is ready for Docker (Docker not included) On my workstation I ran these commands to add the box and initialize and boot an instance: $ vagrant box add ubuntu-precise http://nitron-vagrant.s3-website-us-east-1.amazonaws.com/vagrant_ubuntu_12.04.3_amd64_virtualbox.box $ mkdir linode-test $ cd linode-test $ vagrant init ubuntu-precise $ vagrant up Now Vagrant is running a machine with SSH on port 2222. The operating system version is the same. The kernel version is 3.8.0. Sounds close enough. Restoring the backup With WinSCP I copied the backup file 2.gz to /home/vagrant/2.gz on the Vagrant box. With PuTTY I connected via ssh to my new Vagrant box: On the box move the backup to the filesystem root. $ sudo mv 2.gz / Extract the archive to the filesystem root: $ sudo tar -xvpz -f 2.gz -C / --strip-components=2 (I discovered I need to use strip components because all files in the archive have the prefix backup/2/. I'll fix this for the next backup.) After the tar command completes, I log out of the box. Testing the backup When I try to log in again, it doesn't let me log in as vagrant with a password any more. It does let me log in as iain, my user on the live Linode, with a password. That surprised me because I disabled password authentication on my live Linode. I figured that I have to restart the ssh service for the change to take effect. Instead of restarting just ssh, I chose to restart the whole system. Now I can't even get to the login screen. PuTTY says "connection refused" when I try to connect. What went wrong?

  Read the article

• Call to daemon in a /etc/init.d script is blocking, not running in background

  - by tony

  I have a Perl script that I want to daemonize. Basically this perl script will read a directory every 30 seconds, read the files that it finds and then process the data. To keep it simple here consider the following Perl script (called synpipe_server, there is a symbolic link of this script in /usr/sbin/) : #!/usr/bin/perl use strict; use warnings; my $continue = 1; $SIG{'TERM'} = sub { $continue = 0; print "Caught TERM signal\n"; }; $SIG{'INT'} = sub { $continue = 0; print "Caught INT signal\n"; }; my $i = 0; while ($continue) { #do stuff print "Hello, I am running " . ++$i . "\n"; sleep 3; } So this script basically prints something every 3 seconds. Then, as I want to daemonize this script, I've also put this bash script (also called synpipe_server) in /etc/init.d/ : #!/bin/bash # synpipe_server : This starts and stops synpipe_server # # chkconfig: 12345 12 88 # description: Monitors all production pipelines # processname: synpipe_server # pidfile: /var/run/synpipe_server.pid # Source function library. . /etc/rc.d/init.d/functions pname="synpipe_server" exe="/usr/sbin/synpipe_server" pidfile="/var/run/${pname}.pid" lockfile="/var/lock/subsys/${pname}" [ -x $exe ] || exit 0 RETVAL=0 start() { echo -n "Starting $pname : " daemon ${exe} RETVAL=$? PID=$! echo [ $RETVAL -eq 0 ] && touch ${lockfile} echo $PID > ${pidfile} } stop() { echo -n "Shutting down $pname : " killproc ${exe} RETVAL=$? echo if [ $RETVAL -eq 0 ]; then rm -f ${lockfile} rm -f ${pidfile} fi } restart() { echo -n "Restarting $pname : " stop sleep 2 start } case "$1" in start) start ;; stop) stop ;; status) status ${pname} ;; restart) restart ;; *) echo "Usage: $0 {start|stop|status|restart}" ;; esac exit 0 So, (if I have well understood the doc for daemon) the Perl script should run in the background and the output should be redirected to /dev/null if I execute : service synpipe_server start But here is what I get instead : [root@master init.d]# service synpipe_server start Starting synpipe_server : Hello, I am running 1 Hello, I am running 2 Hello, I am running 3 Hello, I am running 4 Caught INT signal [ OK ] [root@master init.d]# So it starts the Perl script but runs it without detaching it from the current terminal session, and I can see the output printed in my console ... which is not really what I was expecting. Moreover, the PID file is empty (or with a line feed only, no pid returned by daemon). Does anyone have any idea of what I am doing wrong ? EDIT : maybe I should say that I am on a Red Hat machine. Scientific Linux SL release 5.4 (Boron) Would it do the job if instead of using the daemon function, I use something like : nohup ${exe} >/dev/null 2>&1 & in the init script ?

  Read the article

• IIS 7.0 informational HTTP status codes

  - by Samir R. Bhogayta

  1xx - Informational These HTTP status codes indicate a provisional response. The client computer receives one or more 1xx responses before the client computer receives a regular response. IIS 7.0 uses the following informational HTTP status codes: 100 - Continue. 101 - Switching protocols. 2xx - Success These HTTP status codes indicate that the server successfully accepted the request. IIS 7.0 uses the following success HTTP status codes: 200 - OK. The client request has succeeded. 201 - Created. 202 - Accepted. 203 - Nonauthoritative information. 204 - No content. 205 - Reset content. 206 - Partial content. 3xx - Redirection These HTTP status codes indicate that the client browser must take more action to fulfill the request. For example, the client browser may have to request a different page on the server. Or, the client browser may have to repeat the request by using a proxy server. IIS 7.0 uses the following redirection HTTP status codes: 301 - Moved permanently. 302 - Object moved. 304 - Not modified. 307 - Temporary redirect. 4xx - Client error These HTTP status codes indicate that an error occurred and that the client browser appears to be at fault. For example, the client browser may have requested a page that does not exist. Or, the client browser may not have provided valid authentication information. IIS 7.0 uses the following client error HTTP status codes: 400 - Bad request. The request could not be understood by the server due to malformed syntax. The client should not repeat the request without modifications. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 400 error: 400.1 - Invalid Destination Header. 400.2 - Invalid Depth Header. 400.3 - Invalid If Header. 400.4 - Invalid Overwrite Header. 400.5 - Invalid Translate Header. 400.6 - Invalid Request Body. 400.7 - Invalid Content Length. 400.8 - Invalid Timeout. 400.9 - Invalid Lock Token. 401 - Access denied. IIS 7.0 defines several HTTP status codes that indicate a more specific cause of a 401 error. The following specific HTTP status codes are displayed in the client browser but are not displayed in the IIS log: 401.1 - Logon failed. 401.2 - Logon failed due to server configuration. 401.3 - Unauthorized due to ACL on resource. 401.4 - Authorization failed by filter. 401.5 - Authorization failed by ISAPI/CGI application. 403 - Forbidden. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 403 error: 403.1 - Execute access forbidden. 403.2 - Read access forbidden. 403.3 - Write access forbidden. 403.4 - SSL required. 403.5 - SSL 128 required. 403.6 - IP address rejected. 403.7 - Client certificate required. 403.8 - Site access denied. 403.9 - Forbidden: Too many clients are trying to connect to the Web server. 403.10 - Forbidden: Web server is configured to deny Execute access. 403.11 - Forbidden: Password has been changed. 403.12 - Mapper denied access. 403.13 - Client certificate revoked. 403.14 - Directory listing denied. 403.15 - Forbidden: Client access licenses have exceeded limits on the Web server. 403.16 - Client certificate is untrusted or invalid. 403.17 - Client certificate has expired or is not yet valid. 403.18 - Cannot execute requested URL in the current application pool. 403.19 - Cannot execute CGI applications for the client in this application pool. 403.20 - Forbidden: Passport logon failed. 403.21 - Forbidden: Source access denied. 403.22 - Forbidden: Infinite depth is denied. 404 - Not found. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 404 error: 404.0 - Not found. 404.1 - Site Not Found. 404.2 - ISAPI or CGI restriction. 404.3 - MIME type restriction. 404.4 - No handler configured. 404.5 - Denied by request filtering configuration. 404.6 - Verb denied. 404.7 - File extension denied. 404.8 - Hidden namespace. 404.9 - File attribute hidden. 404.10 - Request header too long. 404.11 - Request contains double escape sequence. 404.12 - Request contains high-bit characters. 404.13 - Content length too large. 404.14 - Request URL too long. 404.15 - Query string too long. 404.16 - DAV request sent to the static file handler. 404.17 - Dynamic content mapped to the static file handler via a wildcard MIME mapping. 404.18 - Querystring sequence denied. 404.19 - Denied by filtering rule. 405 - Method Not Allowed. 406 - Client browser does not accept the MIME type of the requested page. 408 - Request timed out. 412 - Precondition failed. 5xx - Server error These HTTP status codes indicate that the server cannot complete the request because the server encounters an error. IIS 7.0 uses the following server error HTTP status codes: 500 - Internal server error. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 500 error: 500.0 - Module or ISAPI error occurred. 500.11 - Application is shutting down on the Web server. 500.12 - Application is busy restarting on the Web server. 500.13 - Web server is too busy. 500.15 - Direct requests for Global.asax are not allowed. 500.19 - Configuration data is invalid. 500.21 - Module not recognized. 500.22 - An ASP.NET httpModules configuration does not apply in Managed Pipeline mode. 500.23 - An ASP.NET httpHandlers configuration does not apply in Managed Pipeline mode. 500.24 - An ASP.NET impersonation configuration does not apply in Managed Pipeline mode. 500.50 - A rewrite error occurred during RQ_BEGIN_REQUEST notification handling. A configuration or inbound rule execution error occurred. Note Here is where the distributed rules configuration is read for both inbound and outbound rules. 500.51 - A rewrite error occurred during GL_PRE_BEGIN_REQUEST notification handling. A global configuration or global rule execution error occurred. Note Here is where the global rules configuration is read. 500.52 - A rewrite error occurred during RQ_SEND_RESPONSE notification handling. An outbound rule execution occurred. 500.53 - A rewrite error occurred during RQ_RELEASE_REQUEST_STATE notification handling. An outbound rule execution error occurred. The rule is configured to be executed before the output user cache gets updated. 500.100 - Internal ASP error. 501 - Header values specify a configuration that is not implemented. 502 - Web server received an invalid response while acting as a gateway or proxy. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 502 error: 502.1 - CGI application timeout. 502.2 - Bad gateway. 503 - Service unavailable. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 503 error: 503.0 - Application pool unavailable. 503.2 - Concurrent request limit exceeded.

  Read the article

• Alternative Methods of Sharing Folders in Windows?

  - by Blaenk

  Hey guys. I'm running Windows 7 and as of now I simply share folders as one usually does in Windows. I then have a MacBook with Leopard (Now Snow Leopard) which I use to connect to my computer to mount the shares by going to Finder, then CMD + K and typing smb://BlaenkPC (The name of my PC) into the address box. This consequently connects to my computer and mounts all of the shares. The problem is that sometimes, if for example I close my MacBook (Which makes it go to sleep) or sometimes even without doing that, the connection somehow drops. Sometimes I close the MacBook and upon re-opening it, everything still works; it's random. It still shows the computer as being connected, but it just shows 'loading' indefinitely. If I hit 'eject' with the intention of re-connecting to the computer, it disappears from the sidebar (The Computer Icon) in Finder, but I cannot re-connect. Activity Monitor (or ps aux, whichever) both show hung instances of umount; one for each share that was mounted. I cannot kill these processes with kill or killall (Yes, even with sudo, and sending signal -9). This has happened to me before, and here is another person who has experienced this. My question boils down to this: Is there an alternative method of sharing folders in Windows, that my Mac can read/understand, that is possibly more reliable and preferably just as fast? I usually use the mounted shares to watch television episodes off my computer, or movies, etc. (In other words, I open them in VLC and they automatically stream from my computer). As far as I can tell, this is a problem with the Samba protocol. I have heard of NFS, but I am not sure if I would have to re-format my drives, or what. I don't mind running a service or daemon to allow the sharing of the folders, I just want it to be done and hopefully in a better way than typical Windows shares through Samba. Usually when I encounter this problem, which is often (read: every day), I have no other option but to restart the MacBook. As I stated in the first question I linked to, shutting down and restarting don't work; I have to manually force the shutdown by holding the power button. I have not modified my installation of Mac OS X in any hackish way, so I doubt it's something with the Operating System, but worst come to worst, I might end up reformatting and doing a clean install to see if that fixes anything, as I am at a complete loss as to what may be causing the problem, and no one else seems to have any idea or care, despite there being quite a few people suffering from this problem, as my research has shown. Any pieces of information that can help are extremely appreciated. You don't have to answer every question on here, but maybe even some insight as to why it might not be possible to kill those hung umount instances for example, or why I may not be able to reconnect using samba (Is it something regarding the way the protocol works?). One thing to note is that I have another computer in the home network that doesn't seem to have this problem. However, it is also running Windows 7 (Note though that I am not using the homegroup feature, but the typical windows sharing feature). My only deduction is that the problem is being caused by the way the Mac (Or Samba implementation, whichever) is handling things. Perhaps it is a limitation.

  Read the article

• Lenovo V570 CPU fan running constantly, CPU core 1 running over 90%!

  - by Rabbit2190

  I have seen that a lot of people are having this same issue. I am running a Lenovo V570 i5 4 core, 6 gigs of ram, and am running 11.10 Onieric Ocelot. On my system monitor graph it shows CPU at 20%, when I open the monitor it shows core #1 at around 90%, the other cores fluctuate at or below 5-12% if even. Now this seems like a really terrible balance of power between the cores, especially with so much stress on one core only, when these things are designed to work with 4 cores and not at such high temps. My current readings say 64 degrees Celsius, this does not seem normal for any cpu, and I am seriously considering, working on my windows7 partition until I see a real solution to this issue or upgrading to 12.04 right away when it comes out... I have seen countless things saying it has something to do with the Kernel, the kernel on mine is the same as when I upgraded, I really do not like messing with it, as when I had 11.04, I did tinker with it due to the freeze issues I was having, and that just made worse issues. I like this version 11.10 and would like to keep it for a while, but without the fear that my core is going to fry! So any help would be much appreciated! I did try changing a couple things in ACPI, and restarting this did not help, and here I am. I tried one thing prior to that that was listed under a different computer brand, but it would not do a make on the file. I really need help with this, I rely on this computer for a lot of things, and love this OS! Please help so I do not need to resort to my Microsoft partition! PLEASE! Here is the fwts cpufrequ- output: rabbit@rabbit-Lenovo-V570:~$ sudo fwts cpufreq - 00001 fwts Results generated by fwts: Version V0.23.25 (Thu Oct 6 15 00002 fwts :12:31 BST 2011). 00003 fwts 00004 fwts Some of this work - Copyright (c) 1999 - 2010, Intel Corp. 00005 fwts All rights reserved. 00006 fwts Some of this work - Copyright (c) 2010 - 2011, Canonical. 00007 fwts 00008 fwts This test run on 02/04/12 at 17:23:22 on host Linux 00009 fwts rabbit-Lenovo-V570 3.0.0-17-generic-pae #30-Ubuntu SMP Thu 00010 fwts Mar 8 17:53:35 UTC 2012 i686. 00011 fwts 00012 fwts Running tests: cpufreq. 00014 cpufreq CPU frequency scaling tests (takes ~1-2 mins). 00015 cpufreq --------------------------------------------------------- 00016 cpufreq Test 1 of 1: CPU P-State Checks. 00017 cpufreq For each processor in the system, this test steps through 00018 cpufreq the various frequency states (P-states) that the BIOS 00019 cpufreq advertises for the processor. For each processor/frequency 00020 cpufreq combination, a quick performance value is measured. The 00021 cpufreq test then validates that: 00022 cpufreq 1) Each processor has the same number of frequency states 00023 cpufreq 2) Higher advertised frequencies have a higher performance 00024 cpufreq 3) No duplicate frequency values are reported by the BIOS 00025 cpufreq 4) Is BIOS wrongly doing Sw_All P-state coordination across cores 00026 cpufreq 5) Is BIOS wrongly doing Sw_Any P-state coordination across cores 00027 cpufreq Frequency | Speed 00028 cpufreq -----------+--------- 00029 cpufreq 2.45 Ghz | 100.0 % 00030 cpufreq 2.45 Ghz | 83.7 % 00031 cpufreq 2.05 Ghz | 69.2 % 00032 cpufreq 1.85 Ghz | 62.5 % 00033 cpufreq 1.65 Ghz | 55.2 % 00034 cpufreq 1400 Mhz | 48.6 % 00035 cpufreq 1200 Mhz | 41.8 % 00036 cpufreq 1000 Mhz | 34.5 % 00037 cpufreq 800 Mhz | 27.6 % 00038 cpufreq 9 CPU frequency steps supported 00039 cpufreq Frequency | Speed 00040 cpufreq -----------+--------- 00041 cpufreq 2.45 Ghz | 97.7 % 00042 cpufreq 2.45 Ghz | 83.7 % 00043 cpufreq 2.05 Ghz | 69.6 % 00044 cpufreq 1.85 Ghz | 63.3 % 00045 cpufreq 1.65 Ghz | 55.7 % 00046 cpufreq 1400 Mhz | 48.7 % 00047 cpufreq 1200 Mhz | 41.7 % 00048 cpufreq 1000 Mhz | 34.5 % 00049 cpufreq 800 Mhz | 27.5 % 00050 cpufreq Frequency | Speed 00051 cpufreq -----------+--------- 00052 cpufreq 2.45 Ghz | 97.7 % 00053 cpufreq 2.45 Ghz | 84.4 % 00054 cpufreq 2.05 Ghz | 69.6 % 00055 cpufreq 1.85 Ghz | 62.6 % 00056 cpufreq 1.65 Ghz | 55.9 % 00057 cpufreq 1400 Mhz | 48.7 % 00058 cpufreq 1200 Mhz | 41.7 % 00059 cpufreq 1000 Mhz | 34.7 % 00060 cpufreq 800 Mhz | 27.8 % 00061 cpufreq Frequency | Speed 00062 cpufreq -----------+--------- 00063 cpufreq 2.45 Ghz | 100.0 % 00064 cpufreq 2.45 Ghz | 82.6 % 00065 cpufreq 2.05 Ghz | 67.8 % 00066 cpufreq 1.85 Ghz | 61.4 % 00067 cpufreq 1.65 Ghz | 54.9 % 00068 cpufreq 1400 Mhz | 48.3 % 00069 cpufreq 1200 Mhz | 41.1 % 00070 cpufreq 1000 Mhz | 34.3 % 00071 cpufreq 800 Mhz | 27.4 % 00072 cpufreq Frequency | Speed 00073 cpufreq -----------+--------- 00074 cpufreq 2.45 Ghz | 96.2 % 00075 cpufreq 2.45 Ghz | 82.5 % 00076 cpufreq 2.05 Ghz | 69.3 % 00077 cpufreq 1.85 Ghz | 62.7 % 00078 cpufreq 1.65 Ghz | 55.0 % 00079 cpufreq 1400 Mhz | 47.4 % 00080 cpufreq 1200 Mhz | 41.1 % 00081 cpufreq 1000 Mhz | 34.0 % 00082 cpufreq 800 Mhz | 27.2 % 00083 cpufreq Frequency | Speed 00084 cpufreq -----------+--------- 00085 cpufreq 2.45 Ghz | 96.5 % 00086 cpufreq 2.45 Ghz | 83.6 % 00087 cpufreq 2.05 Ghz | 68.1 % 00088 cpufreq 1.85 Ghz | 61.7 % 00089 cpufreq 1.65 Ghz | 54.9 % 00090 cpufreq 1400 Mhz | 48.0 % 00091 cpufreq 1200 Mhz | 41.1 % 00092 cpufreq 1000 Mhz | 34.2 % 00093 cpufreq 800 Mhz | 27.8 % 00094 cpufreq Frequency | Speed 00095 cpufreq -----------+--------- 00096 cpufreq 2.45 Ghz | 96.4 % 00097 cpufreq 2.45 Ghz | 82.6 % 00098 cpufreq 2.05 Ghz | 68.8 % 00099 cpufreq 1.85 Ghz | 60.5 % 00100 cpufreq 1.65 Ghz | 52.4 % 00101 cpufreq 1400 Mhz | 48.8 % 00102 cpufreq 1200 Mhz | 41.1 % 00103 cpufreq 1000 Mhz | 34.2 % 00104 cpufreq 800 Mhz | 26.4 % 00105 cpufreq Frequency | Speed 00106 cpufreq -----------+--------- 00107 cpufreq 2.45 Ghz | 95.3 % 00108 cpufreq 2.45 Ghz | 82.5 % 00109 cpufreq 2.05 Ghz | 65.5 % 00110 cpufreq 1.85 Ghz | 62.8 % 00111 cpufreq 1.65 Ghz | 54.8 % 00112 cpufreq 1400 Mhz | 48.0 % 00113 cpufreq 1200 Mhz | 41.2 % 00114 cpufreq 1000 Mhz | 34.2 % 00115 cpufreq 800 Mhz | 27.3 % 00116 cpufreq Frequency | Speed 00117 cpufreq -----------+--------- 00118 cpufreq 2.45 Ghz | 96.3 % 00119 cpufreq 2.45 Ghz | 83.4 % 00120 cpufreq 2.05 Ghz | 68.3 % 00121 cpufreq 1.85 Ghz | 61.9 % 00122 cpufreq 1.65 Ghz | 54.9 % 00123 cpufreq 1400 Mhz | 48.0 % 00124 cpufreq 1200 Mhz | 41.1 % 00125 cpufreq 1000 Mhz | 34.2 % 00126 cpufreq 800 Mhz | 27.3 % 00127 cpufreq Frequency | Speed 00128 cpufreq -----------+--------- 00129 cpufreq 2.45 Ghz | 100.0 % 00130 cpufreq 2.45 Ghz | 77.9 % 00131 cpufreq 2.05 Ghz | 64.6 % 00132 cpufreq 1.85 Ghz | 54.0 % 00133 cpufreq 1.65 Ghz | 51.7 % 00134 cpufreq 1400 Mhz | 45.2 % 00135 cpufreq 1200 Mhz | 39.0 % 00136 cpufreq 1000 Mhz | 33.1 % 00137 cpufreq 800 Mhz | 25.5 % 00138 cpufreq Frequency | Speed 00139 cpufreq -----------+--------- 00140 cpufreq 2.45 Ghz | 93.4 % 00141 cpufreq 2.45 Ghz | 75.7 % 00142 cpufreq 2.05 Ghz | 64.5 % 00143 cpufreq 1.85 Ghz | 59.1 % 00144 cpufreq 1.65 Ghz | 51.4 % 00145 cpufreq 1400 Mhz | 45.9 % 00146 cpufreq 1200 Mhz | 39.3 % 00147 cpufreq 1000 Mhz | 32.7 % 00148 cpufreq 800 Mhz | 25.8 % 00149 cpufreq Frequency | Speed 00150 cpufreq -----------+--------- 00151 cpufreq 2.45 Ghz | 92.1 % 00152 cpufreq 2.45 Ghz | 78.1 % 00153 cpufreq 2.05 Ghz | 65.7 % 00154 cpufreq 1.85 Ghz | 58.6 % 00155 cpufreq 1.65 Ghz | 52.5 % 00156 cpufreq 1400 Mhz | 45.7 % 00157 cpufreq 1200 Mhz | 39.3 % 00158 cpufreq 1000 Mhz | 32.7 % 00159 cpufreq 800 Mhz | 24.3 % 00160 cpufreq Frequency | Speed 00161 cpufreq -----------+--------- 00162 cpufreq 2.45 Ghz | 88.9 % 00163 cpufreq 2.45 Ghz | 79.8 % 00164 cpufreq 2.05 Ghz | 58.4 % 00165 cpufreq 1.85 Ghz | 52.6 % 00166 cpufreq 1.65 Ghz | 46.9 % 00167 cpufreq 1400 Mhz | 41.0 % 00168 cpufreq 1200 Mhz | 35.1 % 00169 cpufreq 1000 Mhz | 29.1 % 00170 cpufreq 800 Mhz | 22.9 % 00171 cpufreq Frequency | Speed 00172 cpufreq -----------+--------- 00173 cpufreq 2.45 Ghz | 92.8 % 00174 cpufreq 2.45 Ghz | 80.1 % 00175 cpufreq 2.05 Ghz | 66.2 % 00176 cpufreq 1.85 Ghz | 59.5 % 00177 cpufreq 1.65 Ghz | 52.9 % 00178 cpufreq 1400 Mhz | 46.2 % 00179 cpufreq 1200 Mhz | 39.5 % 00180 cpufreq 1000 Mhz | 32.9 % 00181 cpufreq 800 Mhz | 26.3 % 00182 cpufreq Frequency | Speed 00183 cpufreq -----------+--------- 00184 cpufreq 2.45 Ghz | 92.9 % 00185 cpufreq 2.45 Ghz | 79.5 % 00186 cpufreq 2.05 Ghz | 66.2 % 00187 cpufreq 1.85 Ghz | 59.6 % 00188 cpufreq 1.65 Ghz | 52.9 % 00189 cpufreq 1400 Mhz | 46.7 % 00190 cpufreq 1200 Mhz | 39.6 % 00191 cpufreq 1000 Mhz | 32.9 % 00192 cpufreq 800 Mhz | 26.3 % 00193 cpufreq FAILED [MEDIUM] CPUFreqCPUsSetToSW_ANY: Test 1, Processors 00194 cpufreq are set to SW_ANY. 00195 cpufreq FAILED [MEDIUM] CPUFreqSW_ANY: Test 1, Firmware not 00196 cpufreq implementing hardware coordination cleanly. Firmware using 00197 cpufreq SW_ANY instead?. 00198 cpufreq 00199 cpufreq ========================================================= 00200 cpufreq 0 passed, 2 failed, 0 warnings, 0 aborted, 0 skipped, 0 00201 cpufreq info only. 00202 cpufreq ========================================================= 00204 summary 00205 summary 0 passed, 2 failed, 0 warnings, 0 aborted, 0 skipped, 0 00206 summary info only. 00207 summary 00208 summary Test Failure Summary 00209 summary ==================== 00210 summary 00211 summary Critical failures: NONE 00212 summary 00213 summary High failures: NONE 00214 summary 00215 summary Medium failures: 2 00216 summary cpufreq test, at 1 log line: 193 00217 summary "Processors are set to SW_ANY." 00218 summary cpufreq test, at 1 log line: 195 00219 summary "Firmware not implementing hardware coordination cleanly. Firmware using SW_ANY instead?." 00220 summary 00221 summary Low failures: NONE 00222 summary 00223 summary Other failures: NONE 00224 summary 00225 summary Test |Pass |Fail |Abort|Warn |Skip |Info | 00226 summary ---------------+-----+-----+-----+-----+-----+-----+ 00227 summary cpufreq | | 2| | | | | 00228 summary ---------------+-----+-----+-----+-----+-----+-----+ 00229 summary Total: | 0| 2| 0| 0| 0| 0| 00230 summary ---------------+-----+-----+-----+-----+-----+-----+ rabbit@rabbit-Lenovo-V570:~$

  Read the article

• Oracle Virtual Server OEL vm fails to start - kernel panic on cpu identify

  - by Towndrunk

  I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm. The log in the OVMM console shows the following; Update VM Status - Running Configure CPU Cap Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '32_EM11g_OVM', '-c', '0'] => Error: Domain '32_EM11g_OVM' does not exist. StackTrace: File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap run_cmd(args=['xm', File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd raise Exception('%s => %s' % (args, err)) The xend.log shows; [2012-11-12 16:42:01 7581] DEBUG (DevController:139) Waiting for devices vtpm [2012-11-12 16:42:01 7581] INFO (XendDomain:1180) Domain 32_EM11g_OVM (3) unpaused. [2012-11-12 16:42:03 7581] WARNING (XendDomainInfo:1907) Domain has crashed: name=32_EM11g_OVM id=3. [2012-11-12 16:42:03 7581] ERROR (XendDomainInfo:2041) VM 32_EM11g_OVM restarting too fast (Elapsed time: 11.377262 seconds). Refusing to restart to avoid loops .> [2012-11-12 16:42:03 7581] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=3 [2012-11-12 16:42:12 7581] DEBUG (XendDomainInfo:2230) Destroying device model [2012-11-12 16:42:12 7581] INFO (image:553) 32_EM11g_OVM device model terminated I have set_on_crash="preserve" in the vm.cfg and have then run xm create -c to get the console screen while booting and this is the log of what happens.. Started domain 32_EM11g_OVM (id=4) Bootdata ok (command line is ro root=LABEL=/ ) Linux version 2.6.18-194.0.0.0.3.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Mon Mar 29 18:27:00 EDT 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000180800000 (usable)> No mptable found. Built 1 zonelists. Total pages: 1574912 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 1600.008 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO TLB disabled Memory: 6155256k/6299648k available (2514k kernel code, 135548k reserved, 1394k data, 184k init) Calibrating delay using timer specific routine.. 4006.42 BogoMIPS (lpj=8012858) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line) CPU: L2 Cache: 2048K (64 bytes/line) general protection fault: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.18-194.0.0.0.3.el5xen #1 RIP: e030:[ffffffff80271280] [ffffffff80271280] identify_cpu+0x210/0x494 RSP: e02b:ffffffff80643f70 EFLAGS: 00010212 RAX: 0040401000810008 RBX: 0000000000000000 RCX: 00000000c001001f RDX: 0000000000404010 RSI: 0000000000000001 RDI: 0000000000000005 RBP: ffffffff8063e980 R08: 0000000000000025 R09: ffff8800019d1000 R10: 0000000000000026 R11: ffff88000102c400 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 Process swapper (pid: 0, threadinfo ffffffff80642000, task ffffffff804f4b80) Stack: 0000000000000000 ffffffff802d09bb ffffffff804f4b80 0000000000000000 0000000021100800 0000000000000000 0000000000000000 ffffffff8064cb00 0000000000000000 0000000000000000 Call Trace: [ffffffff802d09bb] kmem_cache_zalloc+0x62/0x80 [ffffffff8064cb00] start_kernel+0x210/0x224 [ffffffff8064c1e5] _sinittext+0x1e5/0x1eb Code: 0f 30 b8 73 00 00 00 f0 0f ab 45 08 e9 f0 00 00 00 48 89 ef RIP [ffffffff80271280] identify_cpu+0x210/0x494 RSP ffffffff80643f70 0 Kernel panic - not syncing: Fatal exception clear as mud to me. are there any other logs that will help me? I have now deployed another vm from the same template and used the default vm settings rather than adding more memory etc - I get exactly the same error.

  Read the article

• Forwarding rsyslog to syslog-ng, with FQDN and facility separation

  - by Joshua Miller

  I'm attempting to configure my rsyslog clients to forward messages to my syslog-ng log repository systems. Forwarding messages works "out of the box", but my clients are logging short names, not FQDNs. As a result the messages on the syslog repo use short names as well, which is a problem because one can't determine which system the message originated from easily. My clients get their names through DHCP / DNS. I've tried a number of solutions trying to get this working, but without success. I'm using rsyslog 4.6.2 and syslog-ng 3.2.5. I've tried setting $PreserveFQDN on as the first directive in /etc/rsyslog.conf (and restarting rsyslog of course). It seems to have no effect. hostname --fqdn on the client returns the proper FQDN, so the problem isn't whether the system can actually figure out its own FQDN. $LocalHostName <fqdn> looked promising, but this directive isn't available in my version of rsyslog (Available since 4.7.4+, 5.7.3+, 6.1.3+). Upgrading isn't an option at the moment. Configuring the syslog-ng server to populate names based on reverse lookups via DNS isn't an option. There are complexities with reverse DNS and the public cloud. Specifying for the forwarder to use a custom template seems like a viable option at first glance. I can specify the following, which causes local logging to begin using the FQDN on the syslog-ng repo. $template MyTemplate, "%timestamp% <FQDN> %syslogtag%%msg%" $ActionForwardDefaultTemplate MyTemplate However, when I put this in place syslog-ng seems to be unable to categorize messages by facility or priority. Messages come in as FQDN, but everything is put in to user.log. When I don't use the custom template, messages are properly categorized under facility and priority, but with the short name. So, in summary, if I manually trick rsyslog into including the FQDN, priority and facility becomes lost details to syslog-ng. How can I get rsyslog to do FQDN logging which works properly going to a syslog-ng repository? rsyslog client config: $ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command) $ModLoad imklog.so # provides kernel logging support (previously done by rklogd) $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat *.info;mail.none;authpriv.none;cron.none /var/log/messages authpriv.* /var/log/secure mail.* -/var/log/maillog cron.* /var/log/cron *.emerg * uucp,news.crit /var/log/spooler local7.* /var/log/boot.log $WorkDirectory /var/spool/rsyslog # where to place spool files $ActionQueueFileName fwdRule1 # unique name prefix for spool files $ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) $ActionQueueSaveOnShutdown on # save messages to disk on shutdown $ActionQueueType LinkedList # run asynchronously $ActionResumeRetryCount -1 # infinite retries if host is down *.* @syslog-ng1.example.com *.* @syslog-ng2.example.com syslog-ng configuration (abridged for brevity): options { flush_lines (0); time_reopen (10); log_fifo_size (1000); long_hostnames (off); use_dns (no); use_fqdn (yes); create_dirs (no); keep_hostname (yes); }; source src { unix-stream("/dev/log"); internal(); udp(ip(0.0.0.0) port(514)); }; destination per_host_destination { file( "/var/log/syslog-ng/devices/$HOST/$FACILITY.log" owner("root") group("root") perm(0644) dir_owner(root) dir_group(root) dir_perm(0775) create_dirs(yes)); }; log { source(src); destination(per_facility_destination); };

  Read the article

• I Clobbered a Leopard with a Window Last Night

  - by D'Arcy Lussier

  I’ve had my 15” Mac Book Pro for a little over a year now, and its hands-down the best laptop I’ve ever owned…hardware wise. And I tried, I really really tried, to like OSX. I even bought Parallels so I could run Windows 7 and all my development tools while still trying to live in an OSX world. But in the end, I missed Windows too much. There were just too many shortcomings with OSX that kept me from being productive. For one thing, Office for Mac is *not* Office for Windows. The applications are written by different teams, and Excel on the Mac is just different enough to be painful. The VM experience was adequate, but my MBP would heat up like crazy when running it and the experience trying to get Windows apps to interact with an OSX file system was awkward. And I found I was in the VM more than I thought I’d be. iMovie is not as easy to use for doing simple movie editing as Windows Movie Maker. There’s no free blog editing software for OSX that’s on par with Windows Live Writer. And really, all I was using OSX for was Twitter (which I can use a Windows client for) and web browsing (also something Windows can provide obviously). So I had to ask myself – why am I forcing myself to use an operating system I don’t like, on a laptop that can support Windows 7? And so I paved my MBP and am happily running Windows 7 on it…and its fantastic! All the good stuff with the hardware is still there with the goodness of Win 7. Happy happy. I did run into some snags doing this though, and that’s really what this blog post is about – things to be aware of if you want to install Win 7 directly on your MBP metal. First, Ensure You Have Your Original Mac Install Disk This was a warning my buddy Dylan, who’s been running Win 7 on his MBP for a while now, gave me early on. The reason you need that original disk is that the hardware drivers you need are all located there. Apparently you can’t easily download them, so make sure you have them ahead of time. Second, Forget BootCamp The only reason you need BootCamp is if you still want the option to boot into OSX. If you don’t, then you don’t need BootCamp. In fact, you don’t even need BootCamp to install Win 7. What you *will* need though is a DVD with Win 7 burnt on it. Apple doesn’t support bootable USB drives. Well, actually they do for Mac Book Airs which don’t come with optical drives…but to get it working you’ll need to edit a system file of BootCamp so your make of MBP is included in an XML document, and even then you *still* are using BootCamp meaning you’ll be making an OSX partition. So don’t worry about BootCamp, just burn a Windows 7 disc, put it into the DVD drive, and restart your MBP. Third, Know The Secret Commands So after putting in the Windows 7 DVD and restarting your MBP, you’ll want to hold down the ‘C’ key during boot up. This tells the MBP that it should boot from the DVD drive instead of the hard drive. Interestingly, it appears you don’t have to do this if its the Mac OSX install disc (more on that in a second), but regardless – hold down C and Windows will start the install process. Next up is the partition process. You’ll notice that there’s a partition called ETI or something like that. This has to do with the drive format that Apple uses and how they partition their system drives. What I did – I blew it away! At first I didn’t, but I was told I couldn’t install Windows on the remaining space due to the different drive format. Blowing away the ETI partition (and all other partitions) allowed me to continue the Windows install. *REMEMBER –  No warranty is provided or implied, just telling you what I did and how I got it to work. Ok, so now Windows is installed and I’m rebooting. Everything looks good, but I need drivers! So I put in the OSX install DVD and run the BootCamp assistant which installs all the Windows drivers I need. Fantastic! Oh, I need to restart – no problem. OH NO, PROBLEM! I left the OSX install DVD in the drive and now the MBP wants to boot from the drive and install OSX! I’m not holding down the C key, what the heck?! Ok, well there must be a way to eject this disk…hmm…no physical button on the side…the eject button doesn’t seem to work on the keyboard…no little pin hole to insert something to force the disc out…well what the…?! It turns out, if you want to eject a disc at boot up, you need (and I kid you not) to plug a mouse into the laptop and hold down the right-click button while its booting. This ejected the disc for me. Seriously. Finally, Things You Should Be Aware Of Once you have Windows up and running there’s a few things you need to be aware of, mainly new keyboard shortcuts. For instance, on the Mac keyboard there is no Home, End, PageUp or PageDown. There’s also no obvious way to do something like select large amounts of text (like you would by holding Shift-Home at the end of a line of text for instance). So here’s some shortcuts you need to know: Home – fn + left arrow End – fn + right arrow Select a line of text as you would with the Home key – Shift + fn + left arrow Select a line of text as you would with the End key – Shift + fn + right arrow Page Up – fn + up arrow Page Down – fn + down arrow Also, you’ll notice that the awesome Mac track pad doesn’t respond to taps as clicks. No fear, this is just a setting that needs to be altered in the BootCamp control panel (that controls the Mac Hardware-specific settings within Windows, you can access it easily from the system tray icon) One other thing, battery life seems a bit lower than with OSX, but then again I’m also doing more than Twitter or web browsing on this thing now. Conclusion My laptop runs awesome now that I have Windows 7 on there. It’s obviously up to individual taste, but for me I just didn’t see benefits to living in an OSX world when everything I needed lived in Windows. And also, I finally am back to an operating system that doesn’t require me to eject a USB drive before physically removing it! It’s 2012 folks, how has this not been fixed?! D

  Read the article

• mysqld service crashes on restart, after importing mysqldump #innodb

  - by ubunut

  I have 2 mysql servers. Let's call them server01 & server02. Both have the same configuration: mysqladmin Ver 8.42 Distrib 5.1.61, for redhat-linux-gnu on x86_64 [client] default-character-set=utf8 [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_allowed_packet = 16M default-character-set=utf8 default-collation=utf8_unicode_ci character-set-server=utf8 collation-server=utf8_unicode_ci default-storage-engine = InnoDB innodb_data_home_dir = /var/lib/mysql innodb_log_group_home_dir = /var/lib/mysql innodb_data_file_path = ibdata1:10M:autoextend innodb_additional_mem_pool_size = 2M innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_lock_wait_timeout = 50 innodb_flush_log_at_trx_commit = 1 innodb_buffer_pool_size = 700M table_cache = 300 thread_cache_size = 4 query_cache_size = 200m query_cache_limit = 10m [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I make a mysqldump on server01: mysqldump -uuser -ppassword --all-databases testservers.sql (most tables in these databases are innodb, some of the mysql.* tables are Innodb too) Then I import the testservers.sql on server02: mysql -uuser < testservers.sql (mysqld has been started with --skip-network). So far so good, I can login into mysql & everything seems to be ok. BUT when I exit to the shell and execute service mysqld restart, The service fails to start. stack-trace in /var/log/mysqld.log: 121022 14:53:19 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121022 14:53:19 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 121022 14:53:19 [Warning] '--default-collation' is deprecated and will be removed in a future release. Please use '--collation-server' instead. 12:53:19 UTC - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=0 max_threads=151 thread_count=0 connection_count=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338324 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x267e630 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7fff3efe0be0 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x29) [0x84bd89] /usr/libexec/mysqld(handle_fatal_signal+0x483) [0x6a0be3] /lib64/libpthread.so.0() [0x338d60f500] /usr/libexec/mysqld(ha_resolve_by_name(THD*, st_mysql_lex_string const*)+0x81) [0x6956e1] /usr/libexec/mysqld(open_table_def(THD*, st_table_share*, unsigned int)+0xe0a) [0x60e5ba] /usr/libexec/mysqld(get_table_share(THD*, TABLE_LIST*, char*, unsigned int, unsigned int, int*)+0x20b) [0x602b0b] /usr/libexec/mysqld() [0x603597] /usr/libexec/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x7a1) [0x6079a1] /usr/libexec/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5d0) [0x608570] /usr/libexec/mysqld(open_and_lock_tables_derived(THD*, TABLE_LIST*, bool)+0x6a) [0x60877a] /usr/libexec/mysqld(plugin_init(int*, char**, int)+0x622) [0x715af2] /usr/libexec/mysqld() [0x5bd3b2] /usr/libexec/mysqld(main+0x1b3) [0x5bfc93] /lib64/libc.so.6(__libc_start_main+0xfd) [0x338d21ecdd] /usr/libexec/mysqld() [0x5087b9] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (0): is an invalid pointer Connection ID (thread ID): 0 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 121022 14:53:19 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended A typical mysqdump entry looks like this: DROP TABLE IF EXISTS `adodb_logsql`; /*!40101 SET @saved_cs_client = @@character_set_client */; /*!40101 SET character_set_client = utf8 */; CREATE TABLE `adodb_logsql` ( `id` bigint(10) unsigned NOT NULL AUTO_INCREMENT, `created` datetime NOT NULL, `sql0` varchar(250) NOT NULL DEFAULT '', `sql1` text, `params` text, `tracer` text, `timer` decimal(16,6) NOT NULL DEFAULT '0.000000', PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COMMENT='to save some logs from ADOdb'; /*!40101 SET character_set_client = @saved_cs_client */; IF I change all occurrences of "ENGINE=InnoDB" to "ENGINE=MyISAM" before import, then the service has no problem restarting. I'm quite puzzled as to what's happening, maybe I'm just an idiot, then by all means tell me so. Any help would be greatly appreciated!

  Read the article

• Hour-long shutdown duration "shutting down hyper-v virtual machine management service"

  - by icelava

  I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE Ok so i left it hanging over an hour while attending to other matters, and thankfully the host cleanly restarted. I can operate the guest machines fine now. Phew. Hyper-V must have been crawling for some reason. The VMs have been observed to become slow in the past when the host has been up for a long duration (two weeks to a month), but never this slow. Would love to know what types of performance monitoring items i can observe to give a hint why this can happen. UPDATE 2012-02-13 In the months ever since, Hyper-V has stalled into this state another two times. It appears so randomly and without any error event logs to hint what is causing it enter this "drunkard" state. Just an Hyper-V management service timeout. Log Name: System Source: Service Control Manager Date: 13/2/2012 9:16:48 AM Event ID: 7043 Task Category: None Level: Error Keywords: Classic User: N/A Computer: elune Description: The Hyper-V Virtual Machine Management service did not shut down properly after receiving a preshutdown control. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7043</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-02-13T01:16:48.882901900Z" /> <EventRecordID>567844</EventRecordID> <Correlation /> <Execution ProcessID="764" ThreadID="8484" /> <Channel>System</Channel> <Computer>elune</Computer> <Security /> </System> <EventData> <Data Name="param1">Hyper-V Virtual Machine Management</Data> </EventData> </Event> The only means out of it is to restart the system.

  Read the article

• Where's my memory?! Nginx + PHP-FPM front end webserver slows to a crawl...

  - by incredimike

  I'm not sure if I have a problem with a memory leak (as my hosting company suggests), or if we both need to read http://linuxatemyram.com. Maybe you clever people can help us out? This is a front-end webserver VM running essentially only nginx & php-fpm on RHEL 5.5. This server is powering Magento, a PHP eCommerce thinggy. The server is running in a shared environment, but we're changing that soon. Anyway.. after a reboot the server runs just fine, but within a day it will grind itself into nothingness. Pages will take literally 2 minutes to load, CPU spikes like crazy, etc.. The console is even sluggish when I SSH in. It's like my whole server is being brought to its knees. I've also been monitoring the DB server via top and tcpdumping incoming traffic. The DB stays idle for a good portion of that "slow" load time. When i start seeing queries coming from the front-end server, the page loads soon afterward. Here are some stats after me logging in during a slow-down, after restarting php-fpm: [mike@front01 ~]$ free -m total used free shared buffers cached Mem: 5963 5217 745 0 192 314 -/+ buffers/cache: 4711 1252 Swap: 4047 4 4042 [mike@front01 ~]$ top top - 11:38:55 up 2 days, 1:01, 3 users, load average: 0.06, 0.17, 0.21 Tasks: 131 total, 1 running, 130 sleeping, 0 stopped, 0 zombie Cpu0 : 0.0%us, 0.3%sy, 0.0%ni, 99.3%id, 0.3%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 0.3%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 6106800k total, 5361288k used, 745512k free, 199960k buffers Swap: 4144728k total, 4976k used, 4139752k free, 328480k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 31806 apache 15 0 601m 120m 37m S 0.0 2.0 0:22.23 php-fpm 31805 apache 15 0 549m 66m 31m S 0.0 1.1 0:14.54 php-fpm 31809 apache 16 0 547m 65m 32m S 0.0 1.1 0:12.84 php-fpm 32285 apache 15 0 546m 63m 33m S 0.0 1.1 0:09.22 php-fpm 32373 apache 15 0 546m 62m 32m S 0.0 1.1 0:09.66 php-fpm 31808 apache 16 0 543m 60m 35m S 0.0 1.0 0:18.93 php-fpm 31807 apache 16 0 533m 49m 30m S 0.0 0.8 0:08.93 php-fpm 32092 apache 15 0 535m 48m 27m S 0.0 0.8 0:06.67 php-fpm 4392 root 18 0 194m 10m 7184 S 0.0 0.2 0:06.96 cvd 4064 root 15 0 154m 8304 4220 S 0.0 0.1 3:55.57 snmpd 4394 root 15 0 119m 5660 2944 S 0.0 0.1 0:02.84 EvMgrC 31804 root 15 0 519m 5180 932 S 0.0 0.1 0:00.46 php-fpm 4138 ntp 15 0 23396 5032 3904 S 0.0 0.1 0:02.38 ntpd 643 nginx 15 0 95276 4408 1524 S 0.0 0.1 0:01.15 nginx 5131 root 16 0 90128 3340 2600 S 0.0 0.1 0:01.41 sshd 28467 root 15 0 90128 3340 2600 S 0.0 0.1 0:00.35 sshd 32602 root 16 0 90128 3332 2600 S 0.0 0.1 0:00.36 sshd 1614 root 16 0 90128 3308 2588 S 0.0 0.1 0:00.02 sshd 2817 root 5 -10 7216 3140 1724 S 0.0 0.1 0:03.80 iscsid 4161 root 15 0 66948 2340 800 S 0.0 0.0 0:10.35 sendmail 1617 nicole 17 0 53876 2000 1516 S 0.0 0.0 0:00.02 sftp-server ... Is there anything else I should be looking at, or any more information that might be useful? I'm just a developer, but the slowdowns on this system worry me and make it hard to do my work.. Help me out, ServerFault!

  Read the article

• Why don't mails show up in the recipient's mailspool?

  - by Jason

  I have postfix dovecot running with local email system on thunderbird. I have two users on by ubuntu, mailuser 1 and mailuser 2 whom i added to thunderbird. Everything went fine, except the users dont have anything on their inbox on thunderbird and sent mails dont get through. Im using maildir as well. Checking /var/log/mail.log reveals this This what is happining: Restarting postfix and dovecot and then sending mail from one user to another user... I believe this line is the problem May 30 18:31:55 postfix/smtpd[12804]: disconnect from localhost[127.0.0.1] Why is it not connecting ? What could be wrong ? /var/log/mail.log May 30 18:30:21 dovecot: imap: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: imap: Server shutting down. in=467 out=475 May 30 18:30:21 dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: master: Dovecot v2.2.9 starting up (core dumps disabled) May 30 18:30:54 dovecot: imap-login: Login: user=<mailuser2>, method=PLAIN, rip=::1, lip=::1, mpid=12638, TLS, session=<xUfQkaD66gAAAAAAAAAAAAAAAAAAAAAB> May 30 18:31:04 postfix/master[12245]: terminating on signal 15 May 30 18:31:04 postfix/master[12795]: daemon started -- version 2.11.0, configuration /etc/postfix May 30 18:31:55 postfix/postscreen[12803]: CONNECT from [127.0.0.1]:33668 to [127.0.0.1]:25 May 30 18:31:55 postfix/postscreen[12803]: WHITELISTED [127.0.0.1]:33668 May 30 18:31:55 postfix/smtpd[12804]: connect from localhost[127.0.0.1] May 30 18:31:55 postfix/smtpd[12804]: 1ED7120EB9: client=localhost[127.0.0.1] May 30 18:31:55 postfix/cleanup[12809]: 1ED7120EB9: message-id=<[email protected]> May 30 18:31:55 postfix/qmgr[12799]: 1ED7120EB9: from=<[email protected]>, size=546, nrcpt=1 (queue active) May 30 18:31:55 postfix/local[12810]: 1ED7120EB9: to=<mailuser2@mysitecom>, relay=local, delay=0.03, delays=0.02/0.01/0/0, dsn=2.0.0, status=sent (delivered to maildir) May 30 18:31:55 postfix/qmgr[12799]: 1ED7120EB9: removed May 30 18:31:55 postfix/smtpd[12804]: disconnect from localhost[127.0.0.1] May 30 18:31:55 dovecot: imap-login: Login: user=<mailuser1>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=12814, TLS, session=<sD9plaD6PgB/AAAB> This is my postfix main.cf See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination myhostname = server mydomain = mysite.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = $mydomain mydestination = mysite.com #relayhost = smtp.192.168.10.1.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.10.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all home_mailbox = Maildir / mailbox_command= All ports are listening tcp 0 0 *:imaps *:* LISTEN tcp 0 0 *:submission *:* LISTEN tcp 0 0 *:imap2 *:* LISTEN tcp 0 0 s148134.s148134.:domain *:* LISTEN tcp 0 0 192.168.56.101:domain *:* LISTEN tcp 0 0 10.0.2.15:domain *:* LISTEN tcp 0 0 localhost:domain *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 localhost:953 *:* LISTEN tcp6 0 0 [::]:imaps [::]:* LISTEN tcp6 0 0 [::]:submission [::]:* LISTEN tcp6 0 0 [::]:imap2 [::]:* LISTEN tcp6 0 0 [::]:domain [::]:* LISTEN tcp6 0 0 [::]:ssh [::]:* LISTEN tcp6 0 0 [::]:smtp [::]:* LISTEN tcp6 0 0 localhost:953 [::]:* LISTEN

  Read the article

• After each command tmux prints: ps1_update: command not found

  - by B.I.

  On Linux Ubuntu 11.04, after each command (cd, ls, vim...) successful or not, tmux prints out as a last line ps1_update: command not found. Is there any config option I am missing? Thank you very much! tmux.conf # http://lukaszwrobel.pl/blog/tmux-tutorial-split-terminal-windows-easily # just remember that after every modification, tmux must be refreshed # to take new settings into account. # This can be achieved either by restarting it or by typing in: # tmux source-file .tmux.conf # Here is a list of a few basic tmux commands: # Ctrl+b " - split pane horizontally. # Ctrl+b % - split pane vertically. # Ctrl+b arrow key - switch pane. # Hold Ctrl+b, don't release it and hold one of the arrow keys - resize pane. # !Ctrl+b c - (c)reate a new window. # !Ctrl+b n - move to the (n)ext window. # Ctrl+b p - move to the (p)revious window. # Shift+LMB - select text. # ALT+Arrows to move among panes. # rebind default prefix to C-a unbind C-b set -g prefix C-a # use ALT+Arrows to move around panes bind -n M-Left select-pane -L bind -n M-Right select-pane -R bind -n M-Up select-pane -U bind -n M-Down select-pane -D # activity monitoring setw -g monitor-activity on set -g visual-activity on # highlight current pane set-window-option -g window-status-current-bg yellow # enable pane switching with mouse set-option -g mouse-select-pane on # read bashrc source ~/.bashrc # Sane scrolling set -g terminal-overrides 'xterm*:smcup@:rmcup@' commandline print out ($(cat)user@tiki:~/.vim$ ls autoload bash_profile bashrc bundle README.md tmux.conf vimrc xmonad xmonad-ubuntu-conf xsessionrc ps1_update: command not found ($(cat)user@tiki:~/.vim$ ll total 56 drwxrwxr-x 2 user user 4096 Mar 17 10:20 autoload/ -rw-rw-r-- 1 user user 170 Mar 17 10:20 bash_profile -rw-rw-r-- 1 user user 4004 Apr 2 11:37 bashrc drwxrwxr-x 20 user user 4096 Aug 20 10:55 bundle/ -rw-rw-r-- 1 user user 11170 Aug 20 11:24 README.md -rw-rw-r-- 1 user user 1243 Mar 17 10:20 tmux.conf ps1_update: command not found ($(cat)user@tiki:~/.vim$ And the following is plain terminal output, without tmux running user@tiki:~$ ls backup_list.md Documents Dropbox examples.desktop hakers_and_painters.md~ hyundai Music projects ror Ubuntu One Videos windows.sh Desktop Downloads elif.txt hakers_and_painters.md help.txt maqola.txt Pictures Public tmp update_background.sh VirtualBox VMs user@tiki:~$ ll total 116 -rw-rw-r-- 1 user user 380 Aug 9 17:34 backup_list.md drwxr-xr-x 6 user user 4096 Jul 15 09:26 Desktop/ drwxr-xr-x 2 user user 4096 Jul 7 11:26 Documents/ drwxr-xr-x 11 user user 20480 Aug 20 13:53 Downloads/ -rwx------ 1 user user 729 May 7 14:45 update_background.sh* drwxr-xr-x 2 user user 4096 Dec 10 2013 Videos/ drwxrwxr-x 4 user user 4096 Sep 10 2013 VirtualBox VMs/ -rwxrwxr-x 1 user user 36 Jan 11 2014 windows.sh* user@tiki:~$ cd Desktop/ user@tiki:~/Desktop$ ll total 36 -rw-rw-r-- 1 user user 3388 Jul 14 17:10 daily--report.md -rw-rw-r-- 1 user user 71 Jan 28 2014 fernandez readme.md -rw-rw-r-- 1 user user 23 Jan 28 2014 fernandez readme.md~ drwx------ 4 user user 4096 Mar 23 14:02 my_docs/ drwx------ 2 user user 4096 Feb 3 2014 Origami/ drwx------ 7 user user 4096 Feb 1 2013 Plants_vs._Zombies_v1.2.0.1065/ -rwxr-xr-x 1 user user 301 Apr 15 11:28 Sky Fight.desktop* drwx------ 2 user user 4096 Feb 11 2014 webdesign/ -rwxrwxr-x 1 user user 26 Jan 11 2014 windows.sh~* user@tiki:~/Desktop$

  Read the article

• What seems to be plaguing my hard drives?

  - by Craig

  In a little bit of a tech nightmare here. I know oodles about software, not so much more than the above average user about hardware. I recently had to toss an old desktop of mine. It was gradually getting slower and slower, and after shutting the desktop down for long periods of time, it would choke up upon startup. Sometimes it'd give a disk read error, sometimes say no OS was found, etc. Restarting it about 5-15 times would eventually boot properly. Weird. I also noticed that startup programs were going missing, Dropbox was reindexing my entire folder, and Backblaze was backing up less than the number of files that it should. This lead me to believe it was probably a hard drive issue. I began to wonder why I'd have hard drive issues, and came to closure when I assumed it was because of recent power surges and outages. I'm sure that does a number on the drive. I bought a new desktop recently. It's not a beast or anything, but it's enough for what I do. It's an eMachines (I know, I know) Ultra-Slim (http://www.amazon.com/eMachines-Ultra-Slim-ER1401-57-Desktop-PC/dp/B00475OG9U). This is ideal for me because it's small and portable. It comes with an AC adapter and battery, like a laptop. Just to be safe, I bought an uninterruptable power supply on top of that. It's basically protected completely from any outages that might scramble the drive. I set this up a few days ago and for the past few days I've been perfecting settings, downloading the usual applications, etc. Two days ago, I noticed Dropbox was reindexing my entire Dropbox folder. I installed both Dropbox and Backblaze on this system, but it is very much more lightweight than the other. Only about 15 third-party applications installed. I thought that maybe Dropbox and Backblaze were stressing my system, so I turned off Backblaze. Still, Dropbox runs and comes across this infinite reindex issue. I noticed that upon a reboot recently, two applications did not start on startup either. Also, much like my old desktop, every 3rd or 4th reboot, I'll be forced into a chkdsk. This makes me incredibly nervous. What could possibly be going wrong with my old, years-old desktop that is immediately causing the same issues to my new one? I've considered all of the basics. I'm in a very air conditioned room. I take run routine virus scans. I'd like to think I take care of my systems very well. What is this issue that is haunting me? There's always the possibility that this new desktop has a junk hard drive, but it just seems way too coincidental.

  Read the article

• Nginx Multiple Domains

  - by showFocus

  I am trying to add a second virtual host to nginx. When i go to the new domain it redirects to the old one. I have tried restarting Nginx, rebooting the server. Has anyone come across this before, care to share? File: nginx.conf ### user www-data www-data; worker_processes 4; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 5; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; include /usr/local/nginx/sites-enabled/*; } File: ../sites-enabled/domain1.co.uk server { listen 80; server_name www.domain1.co.uk; rewrite ^/(.*) http://domain1.co.uk/$1 permanent; } server { listen 80; server_name domain1.co.uk; access_log /home/me/public_html/domain1.co.uk/log/access.log; error_log /home/me/public_html/domain1.co.uk/log/error.log; location / { root /home/me/public_html/domain1.co.uk/public/; index index.php index.html; # WordPress supercache & permalinks. include /usr/local/nginx/conf/wordpress_params.super_cache; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /home/me/public_html/domain1.co.uk/public/$fastcgi_script_name; } } File: ../sites-enabled/domain2.co.uk server { listen 80; server_name www.domain2.co.uk; rewrite ^/(.*) http://domain2.co.uk/$1 permanent; } server { listen 80; server_name domain2.co.uk; access_log /home/me/public_html/domain2.co.uk/log/access.log; error_log /home/me/public_html/domain2.co.uk/log/error.log; location / { root /home/me/public_html/domain2.co.uk/public/; index index.php index.html; # Basic version of WordPress parameters, supporting nice permalinks. # include /usr/local/nginx/conf/wordpress_params.regular; # Advanced version of WordPress parameters supporting nice permalinks and WP Super Cache plugin include /usr/local/nginx/conf/wordpress_params.super_cache; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /home/me/public_html/domain2/public/$fastcgi_script_name; } }

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64  | Next Page >