Search Results

Search found 2441 results on 98 pages for 'vmware thinapp'.

Page 61/98 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

  • Store ESX5 images on a NAS?

    - by Cylindric
    I have a basic NAS device (Buffallo LinkStation Duo) that can only present SMB fileshares to the network. For testing annd for getting a dying physical machine working I would like to store my VMDK on here. Is that possible, or will I have to find some way of presenting this as an iSCSI target of some sort? I've only used iSCSI or local storage in the past, but this isn't possible at the moment. Thanks.

    Read the article

  • VM load and ping problems after replacing server motherboard

    - by Andre
    Recently, we had to replace the motherboard of one of our servers. The procedure was done by IBM as it had guarantee. The server runs ESXi 5.1, with several virtual machines, including our main mail server (Domino) and a file server. After the replacing the motherboard and staring the VMs, ESXi asked us if we had moved it or copied (different motherboard is like a different computer). We clicked the latter. We started each machine and after some basic reconfiguration, all of them were up. However, we have been having problems with the mail server, it has been acting really slow at times (this could be when it syncs with the secondary mail server) and we have been checking with Centreon (a Nagios frontend) that its CPU load has been a bit high at times and ping response too. There was a moment this morning in which I tried connecting via SSH console and it was really slow to show login and basic commands like ifconfig and top. This particular mail server is a CentOS 4.4.7 64-bit. The little configuring we had to do after restarting it was to configure the network connection as it was resolving through DHCP. Our mail software is Lotus Notes server 9. Do you know of any way in which this replacement may be causing these difficulties, and how to fix it? Thanks.

    Read the article

  • View Security Server and Direct Connection

    - by Poort443
    I have a Security Server for my connections from the Internet. This works fine, accept when I enable "Direct Connection to the desktop". I found the following statement on this: If you bypass the secure connection, the client must establish a direct RDP communication to the desktop virtual machine over RDP (port 3389). Does this mean I have to open 3389 (RDP) to the Internet if I want to use Direct Connections? If I disable Direct Connections to get my Security Server working, I have to disable it on my Connection Server. It's my understanding that this means that if I reboot my Connection Server, all the View clients get disconnected. Is there a way I can disable "Direct Connections" for the Security Server, while enabling it for access from the LAN? Tia.

    Read the article

  • Resource Pools and VMTools Best Practices

    - by LucD
    Are there any published (or non-published) best practices with using Resource Pools in a View environment? Using Shares/Limits etc...Also, when installing the VMTools on a desktop, are there any best practice configurations with running the tools within a desktop?Resource Pools and VMTools Best Practices

    Read the article

  • On ESXi, guest machines hang for significant intervals compared to real machines. How can I fix this?

    - by Tarbox
    This is ESXi version 5.0.0. We plan on upgrading to 5.5 eventually. I have four code profiles, two taken on a real, unvirtualized machine, two taken on a virtual machine. Ordering the list of subroutines by time spent in each one, the two real profiles are practically identical. The two virtual profiles are different from each other and from the real profiles: a subset of subroutines are taking a lot more time on the virtual machines, and the subset is different for each run. The two virtual profiles take a similar amount of time, which is 3 times the amount of time the real profiles take. This gross "how long does it take?" result is consistent after hundreds of tests across three different virtual machines on two different host machines -- the virtual machine is just slower. I've only the code profiling on the four, however. Here's the most guilty set of lines: This is the real machine: 8µs $text = '' unless defined $text; 1.48ms foreach ( split( "\n", $text ) ) { This is the first run on the virtual machine: 20.1ms $text = '' unless defined $text; 1.49ms foreach ( split( "\n", $text ) ) { This is the second run on the virtual machine: 6µs $text = '' unless defined $text; 21.9ms foreach ( split( "\n", $text ) ) { My WAG is that the VM is swapping out the thread and then swapping it back in, destroying some level of cache in the process, but these code profiles were taken when the vm in question was the only active vm on the host, so... what? What does that mean? The guest itself is under light load, this is a latency problem for my users rather than throughput. The host is also under a light load, if I knew what resources to assign where, I could do it without worrying about the cost. I've attempted to lock memory, reserve cpu, assign a restrictive affinity, and disable hyperthread sharing. They don't help, it still takes the VM 2-4x the amount of time to do the same thing as the real machine. The host the tests were run on is 6x2.50GHz, Intel Xeon E5-26400 w/ 16gigs of ram. The guest exhibits the same performance under a wide combination of settings. The real machine is 4x2.13GHz, Xeon E5506 w/ 2 gigs of ram. Thank you for all advice.

    Read the article

  • How to hide a program that is running on a virtual machine?

    - by Femto Trader
    Some softwares contain tests to see if they are running on a virtual machine. It's very unpleasant to see alert messages such as "Sorry, this application cannot run under a Virtual Machine." and have your software stopped! There is a lot of legal reasons to override such tests. Moreover such limitations are (most of the time) not written in User License Agreement. So... how to hide a program that is running on a virtual machine? I'm using a Virtual Private Server (VPS) with Hyper-V... I'm administrator of the Operating System (Windows 2003) installed on this VPS, not administrator of Hyper-V.

    Read the article

  • How to backup virtual machines on a standalone ESXi host?

    - by Massimo
    Standalone ESXi (4.1) host without any vCenter Server. How to backup virtual machines as quickly and storage-friendly as possible? I know I can access the ESXi console and use the standard Unix cp command, but this has the downfall of copying the whole VMDK files, not only their actually used space; so, for a 30-GB VMDK of which only 1 GB is used, the backup would take 30 full GBs of space, and time accordingly. And yes, I know about thin-provisioned virtual disks, but they tend to behave very badly when physically copied, and/or to blow up to their full provisioned size; also, they are not recommended for actual VM performance. It is ok for me to shut down the VMs before backing them up (i.e. I don't need "live" backups); but I need a way to copy them around efficiently; and yes, a way to automate shutdown/startup when taking a backup would also help. I only have ESXi; no Service Console, no vCenter Server... what's the best way to handle this task? Also, what about restores?

    Read the article

  • VLAN issues between linux kernels 2.6 / 3.3 in an ESX / Cisco environment

    - by David Griffith
    I shall attempt to explain an issue I have encountered - I have a VM running on esx 4.1 with an interface connected to VLAN800 via an access port on a cisco 3750. It runs linux - kernel 2.6.24, and has about 5 to 10 Mbit of chatter on 10.10.0.0/16 and various multicast addresses to look after. I needed to isolate certain devices from certain other devices on the network, with all of them having to talk to that one VM. No, the address space can't be separated, nor can the networks be easily vlan'd apart. The software on the VM listens to one interface only. Private vlans appear to be the way to go. So as a test, I built a bridge on the VM that globs together the vlans as needed. All good, everything works as expected. But occasionally (sigh) there's some latency that trips up a couple of profinet devices on the network because, you know, you're not really supposed to trunk real-time protocols around the place willy-nilly. I shift it to our test/backup server - works nicely, but I don't want it to be running on the test server as we muck around with that a lot. So I says to myself, "I'll put it on a new VM for testing and tweaking." I download a small linux distro with kernel 3.3, and install as a new VM with a the vlans as separate interfaces for testing. I power up the testing VM - ok. I bring up all the separate interfaces - ok. I can ping the production VM, see all sorts of traffic going past with tshark, etc. I build a bridge and put the primary vlan on it - the production VM running 2.6 immediately loses its multicast traffic - Unicast is fine. (?) I shut down the bridge - still no multicast traffic (!?) I power-cycle the production VM(!?!?) - multicast traffic returns. I trunk everything into the testing VM and create vlan interfaces under linux instead - same result, as soon as I start the bridge.... no multicast on the production VM. Ok, so I take a break and leave things alone. I decide to play with a couple of ubiquiti bullet radios - I'm testing various firmware as a side project. I flash a radio with Open-wrt-12.09. I enable a trunk on a port on a cisco on our network so I can muck around with multiple vlans and SSIDs I power up the radio and connect - ok. I create a vlan interface from the trunk.... the same vlan as the production VM wayyyyy over there, three cisco routers away. Ok. I bridge the vlan interface to the wifi interface and immediately get a phone call. The production VM has (suprise!) lost its multicast traffic. Again, nothing comes back until I power-cycle the VM. What the hell is going on?

    Read the article

  • Apache's htcacheclean doesn't scale: How to tame a huge Apache disk_cache?

    - by flight
    We have an Apache setup with a huge disk_cache (500.000 entries, 50 GB disk space used). The cache grows by 16 GB every day. My problem is that the cache seems to be growing nearly as fast as it's possible to remove files and directories from the cache filesystem! The cache partition is an ext3 filesystem (100GB, "-t news") on an iSCSI storage. The Apache server (which acts as a caching proxy) is a VM. The disk_cache is configured with CacheDirLevels=2 and CacheDirLength=1, and includes variants. A typical file path is "/htcache/B/x/i_iGfmmHhxJRheg8NHcQ.header.vary/A/W/oGX3MAV3q0bWl30YmA_A.header". When I try to call htcacheclean to tame the cache (non-daemon mode, "htcacheclean-t -p/htcache -l15G"), IOwait is going through the roof for several hours. Without any visible action. Only after hours, htcacheclean starts to delete files from the cache partition, which takes a couple more hours. (A similar problem was brought up in the Apache mailing list in 2009, without a solution: http://www.mail-archive.com/[email protected]/msg42683.html) The high IOwait leads to problems with the stability of the web server (the bridge to the Tomcat backend server sometimes stalls). I came up with my own prune script, which removes files and directories from random subdirectories of the cache. Only to find that the deletion rate of the script is just slightly higher than the cache growth rate. The script takes ~10 seconds to read the a subdirectory (e.g. /htcache/B/x) and frees some 5 MB of disk space. In this 10 seconds, the cache has grown by another 2 MB. As with htcacheclean, IOwait goes up to 25% when running the prune script continuously. Any idea? Is this a problem specific to the (rather slow) iSCSI storage? Should I choose a different file system for a huge disk_cache? ext2? ext4? Are there any kernel parameter optimizations for this kind of scenario? (I already tried the deadline scheduler and a smaller read_ahead_kb, without effect).

    Read the article

  • Run Photoshop on VM (virtual machine) to increase calculation power, without violating the licence agreement (EULA)

    - by mecplusultra
    A question concerning the possibility to run Photoshop as VM without violating the licence agreement (EULA) : My Adobe Photoshop is bloody slow, nd sometimes I need to launch thousands of image calculations that have to use hundreds of PSD templates. I want to increase my Photoshop calculation power by creating non-persistent virtual machines on my hosted server. Each VMm would only alive for a few seconds, just enough time to deliver the calculated file. Is this a violation of the EULA? I must clarify that I'm the only one to access my non persistent VMs.

    Read the article

  • VM: Windows 7 host, Linux guest, VT-d?

    - by chx
    I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

    Read the article

  • ESX 3.5 refuses to update

    - by Speeddymon
    I have a set of ESX 3.5 servers in 2 different datacenters. One is DR, one is production. They are on the same vlan and so I can access any of them on the private network from my vCenter server. Last month, as a learning experience (I hadn't dealt with ESX much before), I updated the DR server. Other than finding out that a couple of bundles had to be installed manually in order to get the rest to install from vCenter, it went off without a hitch. Now, I'm trying to do the same for our production servers and it is not working. I've googled around for the error I get during scan, and investigate loads of different solutions (editing the integrity file, checking DNS, etc) -- I did install the 2 bundles that had to be installed manually already -- but scan from vCenter is just not working. Side note: I did just scan the DR server again and that scan works fine so shouldn't be a problem with vCenter that has cropped up recently -- it has to be something else. The error I get is: Patch metadata for (servername) missing. Please download updates metadata first. Failed to scan (servername) for updates. I'm all out of ideas on how to make this work, so any help would be hugely appreciated.

    Read the article

  • Access from one VM to an Other

    - by meo
    I got a Linux VM Image from a dev in our company to develop on it. This works nice, but now i need to do some Internet Explorer testing, for that i have an other VM with windows on it. I have an entry in my hosts file under macos that redirect some virtual domain to the IP of the linux VM. I tried to modify the hosts file in windows also. But i cant reach Linux VM. How can i access the Server on the linux VM with Windows VM? Are there some settings i missed?

    Read the article

  • How to move a partition to the end in gparted?

    - by matnagel
    I can't find a way to move the partition /dev/sdb2 to the end, where 12GB are free http://dl.dropbox.com/u/3358699/permanent/gparted-sdb.png I can resize (expand) the partition, but not create (insert) any free space in front of it. How to do the trick? (There are 2 small black arrows on the top of the popup window in the screenshot at the side of the blue box that represents the 400 GB sdb2 - I can only move the right arrow to the right, which extends the size, but I cannot move the left arrow. When I enter something in the free space preceding box it is always reset to zero by the programm immediateley) I hope I explained this well enough, please feel free to ask for details. This is serious for me as I am expanding a live image. Maybe there is another solution with linux commandline tools ?

    Read the article

  • Should we install the OS on an SSD or not when running virtual machines?

    - by Raghu Dodda
    I have a new Dell Mobile Precision M6500 laptop with 8 GB RAM. it has two hard drives - 500 GB @7200 RPM and a 128 GB SSD. The main purpose of these laptop is software development in virtual machines. The plan is to install the base OS (Windows 7) and all the programs in the 500 GB drive, and let the SSD only contain the virtual machine images. It is my understanding that the we get most performance from the virtual machines if the images are on a separate hard drive than the base OS. Is this the way to go, or should I install the OS on the SSD as well? What are the pros and cons? The virtual machine images would be between 20 - 30 GB, and I might run 1 or 2 at a time.

    Read the article

  • Logging communication between two VMs

    - by sYnfo
    Hi, I'm trying to set up "malware lab" described in this paper. So far, I've set up Windows guest system, adding one Host-only Network adapter, and setting this (sorry if the names aren't exactely correct, I don't have an english language version): - IP Address - 10.0.0.3 - Subnet mask - 255.255.255.0 - Default gateway - not set - Preferred DNS - 10.0.0.4 - Alternate DNS - not set And a Linux guest system - Ubuntu 9.04 - with two Network adapters - Bridged (eth0) and Host-only (eth1), and setting eth1 IP Address to 10.0.0.4, leaving the eth0 to be set by DHCP. Then, I have configured iptables as described in the paper, ie.: iptables -F -t nat iptables -F -t mangle iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -A PREROUTING -i eth0 -j ACCEPT iptables -t mangle -A PREROUTING -p udp -i eth1 -d 10.0.0.3 --dport 53 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 --dport 80 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 -d 10.0.0.3 --dport 6000:7000 -j ACCEPT iptables -t mangle -A PREROUTING -i eth1 -j ULOG iptables -t mangle -A PREROUTING -i eth1 -j DROP Now, when I try to ping the windows system from within the Linux system, it does not reply, I guess thats perfectly normal, because iptables is blocking ping responce. Same when I try to ping the Linux system from within the Windows. But when I try to access any web page from within the Windows system, I would expect that this action should get logged by iptables. But thing is, I don't see any of that kind of lines in log file (If I am looking in the right place, that is. :) It is at /var/log/messages, isn't it?). So, what do you think might be the problem here? I should note, that this is the first time I'm using linux, so don't expect ANY working knowledge of Linux at all... :) Also, since english is not my mother tongue, feel free to point out any gramatical mistakes... :) Thanks for any advice.

    Read the article

  • Windows backups to VM Esxi

    - by Martyn
    I'm very new to ESXi, so apologies if this is a silly question. I have ESXi 5.1 running running on HP Proliant Microserver with internal LUNs RAIDed with HP P410 Smart Array card. I have 2 Windows Server 2012 VMs running as Domain controllers. These are being backed-up up with GhettoVCB to a dedicated datastore hosted on LUNs on a eSata external device. I have several Windows 8 & 7 PC's connected to this domain. I want to back up these Windows PCs, via the built in backup software, ideally to the external eSata device as well. What do I need to do to have the Windows PC's see the datastore? I assume I could create a VM for FreeNas or something, or share out the datastore via one of the Windows Server 2012 VMs. Both those options seem a little bit of an over kill?

    Read the article

  • Security tab missing on Windows 7 VM

    - by Chris
    I am trying to get a .NET website running. The problem I am getting can be resolved by setting the security on the folder that the site is running from, but I do not have a security tab. I am running window 7 in VM on MAC.

    Read the article

  • ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

    - by user40944
    Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

    Read the article

  • VMWare/Ubuntu development stack with symlink to Windows 7

    - by wdhilliard
    I would like to use a vm ubuntu installation as my testing environment, but to ease workflow, I have symlinked /var/www to a windows share. Everything looks good when browsing files and the owner and group both are showing up as www-data, but I can not seem to get apache to respond with anything other than permission denied. Obviously there are still some permission issues between Windows 7 and Ubuntu, but I don't know where to go

    Read the article

  • Hylafax with serial over IP modem

    - by zero_r
    I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

    Read the article

  • VM guest cloning.

    - by davidyuz
    I am able to make a copy of my existing VM guest folder and another folder on my datasource (trying to clone this vm to a new vm). However, I can't seem to add a way to add it to the inventory so that I could start it up. Any suggestion on this matter? I'm using ESX4 Thanks David.

    Read the article

  • Postgres 8.3 fails to restart as a service on VMS and Server 2003

    - by Woot4Moo
    Currently I am experiencing an issue with a Postgres 8.3 install wherein after a system restart a service is unable. The error message is as follows: waiting for server to start...Access is denied. ............................................................could not start server The command being executed is pg_ctl.exe start -N "MyService" -D "C:\MyData" I am logged in and executing this as an administrator. The issue originally happened after uninstalling and reinstalling postgres, the /data directory was removed as well.

    Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >