Search Results

Search found 2176 results on 88 pages for 'wide'.

Page 61/88 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Troubleshooting loss of network connectivity in Windows 2003 - What else to check?

  - by Benny

  We are facing a weird problem in our data center. Our Backup server (running EMC Networker) loses network connection every alternate day around 3:00 AM (Backup schedule starts at midnight). After 2 hours of outage, the network connectivity recovers automatically and back to normal. What we observed: It is unlikely to be network issue, since it is directly connected to server farm switch (layer 2 connection without any intermediate hops). Further, the server is connected to two different switches for Load balancing using Broadcomm Teaming. a) If it were a switch related issue it is unlikely that both the network ports go down, since they are connected to different switch. b) A possibility Vlan wide issue is also ruled out since other devices in the same Vlan are fine. c) Switch interface status is always up. But there are lot of packet drops during the outage period - Can be attributed to high interface utilization of the backup server (near 100%) d) Connectivity is restored without any change on network. Next suspect is resource utilization on Windows server. Both CPU and Memory have rarely exceeded 80%, but NIC card utilization is alarmingly high (near 100%) Not really sure how to investigate this?

  Read the article

• How can I make the Windows 7 taskbar behave like a cross between the old Quick Launch and new Superbar?

  - by frumious

  I really like the taskbar in Windows 7, I think combining buttons to launch apps and the icons that show your running apps is groovy. However, because I like having as much space as possible, I've got small icons enabled and shrunk the bar down to one row. I've also told it not to group the running apps unless there's no space left (to save me having to work harder to find the particular window I want), which also means that they have captions, and are thus quite wide. The (admittedly small) problem this gives me is that I can pin all my favourite apps to the bar, which looks much like the old Quick Launch bar, but when I launch them the running apps because much wider, and the unlaunched apps get lost amongst them. I can manually change the order to fix this, but next time I'll launch a different app and I'll be back to square one. What I'd prefer is for small unlaunched icons to be kept on the left, and wider running apps to move over to the right, which for me would be the best of both worlds. Is there any way I can organise that? I'm aware that one can use the traditional quick launch bar in Windows 7, but that's not what I'm after; I generally prefer the Windows 7 way.

  Read the article

• my X server doesn't load a module called "glx", but my video drivers seem to be installed

  - by rumtscho

  I just got a new, very wide monitor (2560x1440) and there is no sense maximizing my applications. So I installed Compiz Config Settings Manager and enabled Grid. Nothing happened, the shortcuts don't move application windows. Went to System - Preferences - Appearance, the Visual effects tab. It at "disabled". When I try to set them to "normal" or "extra", a message box appears telling me that it's searching for video drivers, then disappears, and I get an error message "Desktop effects could not be enabled". I opened Xorg.0.log, and had errors there: (EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so (II) UnloadModule: "glx" (EE) Failed to load module "glx" (loader failed, 7) (II) LoadModule: "extmod" Going to Administration - System - Hardware drivers, it said that there are no available and/or installed hardware drivers. But apt-get said that it cannot install nvidia-glx-185, as it is already installed. Googling my error message suggested that I install and run something called envyng. This let me install the nvidia drivers again, and now I can see in the Hardware Drivers window that they are installed and active. But the error message in Xorg.0.log remains, and I still cannot enable the Compiz effects or use Grid. Now, I don't have enough Linux experience to understand if this is a single cause-effect-chain of problems, or three independent ones, but I'd appreciate help for any of them. I am running Ubuntu 9.10, the video card is a GeForce 7600GS.

  Read the article

• How to configure IIS 7.5 to allow special chars in Url for ASP.NET 3.5?

  - by Sebastian P.R. Gingter

  I'm trying to configure my IIS 7.5 to allow specials chars in the url for ASP.NET. This is important to support wide-spread legacy url's on a new system. Sample url: http://mydomain.com/FileWith%inTheName.html This would be encoded in the url and requested as http://mydomain.com/FileWith25%inTheName.html This simply works, when creating a new web in IIS 7.5, placing a file with the percentage sign in the file name in the web root and pointing the browser to it. This does not work, however, when the web site is an ASP.NET application. ASP.NET always returns a 400.0 - Bad Request error in the WindowsAuthentication module from the StaticFile handler, when pointing to that url. It however displays the requested url correctly and also resolves correctly to the correct physical file (the information from the field 'Physical Path' from the Server error page points to the physically available file). There are hints on how to enable this, so I followed the instructions on these websites step by step: http://dirk.net/2008/06/09/ampersand-the-request-url-in-iis7/ http://adorr.net/2010/01/configure-iis-to-accept-url-with-special-characters.html The second one actually sums up the information from the first post and adds some more information about x64 systems (we're running x64) and on an additional web.config change for this. I tried all that, and still can't get this running from an asp.net web application. And yes: I rebooted after applying the registry changes. So, what do I have to do in addition to the settings described in above posts, to support the legacy url's which contain percentage characters? Additional info: Application Pool mode is integrated. Push after some days. No idea anyone?

  Read the article

• Strange activity in My Pictures folder: Thumbnail doesn't match actual picture.

  - by Sam152

  After finding an amusing picture on a popular imageboard, I decided to save it. A few days past and I was browsing my images folder when I realised that the thumbnail generated by Windows XP in the thumbnails view did not match the actual image. Here is a comparison image: What's even stranger in this situation is that the parts of the photograph that are different have actually been replaced with what might be the correct background. Furthermore, it is a jpeg (no PNG transparency tricks) that is 343 kilobytes but only 847x847 pixels wide. What could be going on here? Could there be anything malicious in the works, or hidden data? Before anyone asks, I have checked and preformed the following: Deleted Thumbs.db to reload thumbnails. Opened image in different editors. (they appear with the text) Moved image to a different directory. Changed the extension to .rar. All these steps produce the same results. Pre actual posting update: It seems that opening the image in paint, changing the image entirely (deleting entire contents and making a red fill) will still generate the original thumbnail, even after deleting Thumbs.db etc. I'm also hesitant to post the original data, in case there is something malicious or hidden that could be potentially illegal. (Although it would be very beneficial to see if it works on other computers and not just my own).

  Read the article

• Shrinking a large transaction log on a full drive

  - by Sam

  Someone fired off an update statement as part of some maintenance which did a cross join update on two tables with 200,000 records in each. That's 40 trillion statements, which would explain part of how the log grew to 200GB. I also did not have the log file capped, which is another problem I will be taking care of server wide - where we have almost 200 databases residing. The 'solution' I used was to backup the database, backup the log with truncate_only, and then backup the database again. I then shrunk the log file and set a cap on the log. Seeing as there were other databases using the log drive, I was in a bit of a rush to clean it out. I might have been able to back the log file up to our backup drive, hoping that no other databases needed to grow their log file. Paul Randal from http://technet.microsoft.com/en-us/magazine/2009.02.logging.aspx Under no circumstances should you delete the transaction log, try to rebuild it using undocumented commands, or simply truncate it using the NO_LOG or TRUNCATE_ONLY options of BACKUP LOG (which have been removed in SQL Server 2008). These options will either cause transactional inconsistency (and more than likely corruption) or remove the possibility of being able to properly recover the database. Were there any other options I'm not aware of?

  Read the article

• Windows Firewall Software to Filter Transit Traffic

  - by soonts

  I need to test my networking code for Nintendo Wii under the conditions when some specific Internet server is not available. Wii is connected to my PC with crossover ethernet cable. PC has 2 NICs. PC is connected to hardware router with ethernet cable. The hardware router serves as NAT and has an internet connected to its uplink. I set the Wii to be in the same lan as PC by using Windows XP Network bridge. I can observe the WII network traffic using e.g. Wireshark sniffer. Is there a software firewall that can selectively filter out transit traffic? (e.g. block outgoing TCP connections to 123.45.67.89 to port 443) I tried Outpost Pro 2009 and Comodo. Outpost firewall blocks all transit traffic with it's implicit "block transit packet" rule. If the transit traffic is explicitly allowed by creating the system-wide low level rule, then it's allowed completely and no other filter can selectively block it. Comodo firewall only process rules when the packet has localhost's IP as either source or destination, allowing the rest of the traffic. Any ideas? Thanks in advance! P.S. Platform is Windows XP 32 bit, no other OSes is allowed, Windows ICS (Internet Connection Sharing) doesnt work since the Wii is unable to connect, becides I don't like the idea of adding one more level of NAT.

  Read the article

• Can't write to samba share

  - by Tiddo

  I try to setup a samba file server, but whatever I do I can't get write access to work (reading works fine). This is my current situation: I have a local fileserver with 3 harddisks mounted at /mnt/share/disk<nr>. 2 of these use the ext4 filesystem, the third one is ntfs. This file server runs Fedora 18 32-bit. The root folders of these harddisks are owned by superman:superman, and testparm outputs the following: [global] workgroup = WORKGROUP netbios name = FILE_SERVER server string = Samba Server Version %v interfaces = lo, eth0, 192.168.123.191/8 log file = /var/log/samba/log.%m max log size = 50 unix extensions = No load printers = No idmap config * : backend = tdb hosts allow = 192.168.123. cups options = raw wide links = Yes [share] comment = Home Directories path = /home/share/ write list = superman, @users force user = superman read only = No create mask = 0777 directory mask = 0777 inherit permissions = Yes guest ok = Yes I've tried a lot to get this to work: the disk are chmodded to 777, I've tried turning off selinux, I've added the samba_share_t label to the disks and as can be seen in the above output I tried to make the smb config as permissive as I could, but still I cannot write to the share (tried from Windows 7 and another Fedora installation). What can I try to be able to write to the shares? EDIT: The replies I got so far are mostly concerned with the smb.conf. I have however tried a lot of different setup, ready made configs, and solutions to similar problems for the smb.conf file, so I suspect that the real problem is somewhere else.

  Read the article

• Restricting Access to Application(s) on Point of Sale system

  - by BSchlinker

  I have a customer with two point of sale systems, a few workstations and a Windows 2003 SBS Server. The point of sale systems are typically running QuickBooks Point of Sale and are logged in with a user who has restricted permissions / access (via Group Policy). Occasionally, one of the managers needs to be able to run a few additional applications -- including some accounting software. I have created an additional user for this manager, allowing them to login and access the accounting software. The problem is, it can be problematic to switch users on the system, as QuickBooks takes a few minutes to close (on POSUser) and then reopen (on ManagerUser). If customers are waiting, this slows things down drastically. Since the accounting software is stored on a network drive, it would be easiest if the manager could simply double click something, authenticate against the network drive / domain controller and then the program would launch. When they close the program, the session to the network drive would be lost and the program would no longer be accessible. Is there any easy way to do this? Both users are on a domain and the system is Windows 7. I just don't want to require the user to switch back and forth. In a worst case scenario, they forget to switch back and leave the accounting software wide open.

  Read the article

• Win7 VM @ ESXi Server @ VMWorkstation (Win7) - ping works only from VM -> HostOS, not vice versa

  - by DK2000

  right now I'm toying around with VM Ware stuff and not having any pcs then my laptop I decided to run an ESXi Server inside of VWmware Workstation. I was just curios to see if the server would allow to setup and run a VM. And after some tweaking there it was, working like a charm. Okay not that fast but startin' the VM from vSphere and "opening a console" gave my direct access to that VM. Now I wanted to see if I could ping the host from the VM (VM Workstation Network is set to "host only"). And it worked, at least from the VM I could ping the ESXi server and the host. From the host I am able to ping the ESXi Server but I can't ping the VM! I asked myself anyway where the VM got its ip adress from. At the DCHPs IP there is at no machine after all. I even tried to use that DHCP adress for my Host and it didn't work out. You can see my settings from the screenshot here (it's pretty wide so just a link): http://yfrog.com/n4desktopfeop The only thing that got me thinking was when I once changed the ESXi's IP from 192.168.92.137 to 192.168.0.137. I still was able to connect to the ESXi server via its new IP but when I tried to run the VM console from vSphere I got an error after a while that said "couldnt connect to 192.168.92.137:903". So vSphere connects just through a port of the ESXi server to the VM?!? Could I setup a Linux VM to use it as a DHCP that I'd at least have control over the IPs that are given. Which lowest end linux could be used for this purpose?!? Thank you for your time! :)

  Read the article

• Juniper’s Network Connect ncsvc on Linux: “host checker failed, error 10”

  - by hfs

  I’m trying to log in to a Juniper VPN with Network Connect from a headless Linux client. I followed the instructions and used the script from http://mad-scientist.us/juniper.html. When running the script with --nogui switch the command that gets finally executed is $HOME/.juniper_networks/network_connect/ncsvc -h HOST -u USER -r REALM -f $HOME/.vpn.default.crt. I get asked for the password, a line “Connecting to…” is printed but then the programm silently stops. When adding -L 5 (most verbose logging) to the command line, these are the last messages printed to the log: dsclient.info state: kStateCacheCleaner (dsclient.cpp:280) dsclient.info --> POST /dana-na/cc/ccupdate.cgi (authenticate.cpp:162) http_connection.para Entering state_start_connection (http_connection.cpp:282) http_connection.para Entering state_continue_connection (http_connection.cpp:299) http_connection.para Entering state_ssl_connect (http_connection.cpp:468) dsssl.para SSL connect ssl=0x833e568/sd=4 connection using cipher RC4-MD5 (DSSSLSock.cpp:656) http_connection.para Returning DSHTTP_COMPLETE from state_ssl_connect (http_connection.cpp:476) DSHttp.debug state_reading_response_body - copying 0 buffered bytes (http_requester.cpp:800) DSHttp.debug state_reading_response_body - recv'd 0 bytes data (http_requester.cpp:833) dsclient.info <-- 200 (authenticate.cpp:194) dsclient.error state host checker failed, error 10 (dsclient.cpp:282) ncapp.error Failed to authenticate with IVE. Error 10 (ncsvc.cpp:197) dsncuiapi.para DsNcUiApi::~DsNcUiApi (dsncuiapi.cpp:72) What does host checker failed mean? How can I find out what it tried to check and what failed? The HostChecker Configuration Guide mentions that a $HOME/.juniper_networks/tncc.jar gets installed on Linux, but my installation contains no such file. From that I concluded that HostChecker is disabled for my VPN on Linux? Are the POST to /dana-na/cc/ccupdate.cgi and “host checker failed” connected or independent? By running the connection over a SSL proxy I found out that the POST data is status=NOTOK (Funny side note: the client of the oh-so-secure VPN does not validate the server’s SSL certificate, so is wide open to MITM attacks…). So it seems that it’s the client that closes the connection and not the server.

  Read the article

• Few questions about a good projector on my PC and tv?

  - by jasondavis

  I have always wanted a projector for my tv, satelite, cable, and even PC in a spare bedroom. Well it's more of a home office that I spend most my time in and the catch here is it is a small room. Room is only the standard 8foot tall. Room is about 13 feet wide on the wall where I would like to mount the project and the wall where the screen would be for it. So only about 13 feet away from projector to screen. I would like to know... 1) From experience or knowledge what would be a good projector I could hook up to my satelite box and also my PC? Cheaper is better in this case but I would still like the best image for my buck and something reliable. There is no sunlight in the room either to worry about. 2) From that distance of about 12-13 feet away, how big of a clear picture could I expect? 3) What kind of cables would I need to purchase and run through my attic to my cable/satelite receiver box as well as my PC? 4) These cables in question 3 would most likely need to be a good 15-20feet in length to reach, would I need anything special for that to work at those distances?

  Read the article

• How do I identify Blackberry / OWA users in my IIS logs?

  - by Quinten

  We just rolled out a Blackberry Express Server, and would like to make sure that all Blackberry devices that our users own are connecting SOLELY through the BES server. We are running Exchange 2010 SP1. I've read some links that discuss blocking BIS at the firewall level. Before doing that, however, I'd like to individually contact all users with Blackberries and make sure that they have a chance to switch to the BES server. I've sent a company-wide email, but unsurprisingly folks tend to tune these out until they are forced into action. Is there an easy way to identify the users with Blackberries by searching IIS logs, or perhaps using the Exchange Management Shell? Especially some automated way? I've tried searching for the Blackberry identifier, but it does not appear next to any user name, so it's not as helpful as it could be. Edit: to clarify, what I'm talking about is the fact that Blackberries can use OWA to download mail to the phone. We do not allow IMAP or POP access through our firewall so that's not a concern--just folks with Blackberries using Blackberry's hack to allow it to connect to Exchange without a BES server. As far as I know, Blackberries are the only popular phones that use this method to download mail.

  Read the article

• Windows Network File Transfer to Samba server: “Are you sure you want to copy this file without its properties?”

  - by jimp

  I am transferring a lot of files to a new NAS based on OpenMediaVault, with the Samba 3.5.6 service running. I am transferring from Windows 7 64-bit to the NAS, and on some media files Windows is prompting about losing some property data across the transfer. I have never seen this before when transferring to Samba boxes I have built myself (vs this turnkey solution), so I'm guessing there must be a Samba setting I can change to preserve the file properties in question instead of permanently losing whatever they contain (Date Taken? Exposure? Flash Fired? etc). Or maybe I've just never encountered this before; I'm really not sure. I tried adding ea support = yes and store dos attributes = yes to the [global] section, but the problem remains. The Linux file system is ext4 mounted with user_xattr (full options: defaults,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0) as Samba requires. Any ideas would be greatly appreciated. Thank you! Samba config: [global] workgroup = WORKGROUP server string = %h server include = /etc/samba/dhcp.conf dns proxy = no log level = 2 syslog = 2 log file = /var/log/samba/log.%m max log size = 1000 syslog only = yes panic action = /usr/share/samba/panic-action %d encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = no passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes socket options = TCP_NODELAY IPTOS_LOWDELAY guest account = nobody load printers = no disable spoolss = yes printing = bsd printcap name = /dev/null unix extensions = yes wide links = no create mask = 0777 directory mask = 0777 use sendfile = no null passwords = no local master = yes time server = yes wins support = yes ea support = yes store dos attributes = yes Note: I found this related question, but it explains the loss due to the user trying to transfer from NTFS to FAT32.

  Read the article

• Tridion 2011 SP1 Core Service - expose to live server within PROD env

  - by Neil

  We have a requirement to allow our users to submit information about their "projects" - a small piece of text and single image they upload. Ultimately we'll have a listing page of user contributed projects that others can comment on and rate. We've decided to user Tridion's UGC for rating & comments site-wide for this first phase which has got me thinking - UGC is tied to Tridion published pages & components, if we want UGC on our user-submitted projects, they'll have to be created within Tridion as components themselves, not be sat in some custom db table? Is this where the Core Service could come in? My understanding is that the CD Web Service is for retrieval, not for interacting with the Content Manager. Is it OK (!) architecturally to expose the Core Service only to our live application servers so our backend .NET code can create "project components" that can be then be published by editors allowing them to be commented on? Everything sounds pretty neat and tidy apart from the "exposing Core Service to live servers" bit. Without this though I'd have to write a custom way to "transfer" it back over to the Content Manager - maybe like Audience Manager Sync works? Anyone done this before?

  Read the article

• Permanently deleting files on Mac OS

  - by Jonik

  A while back, as relatively new Mac OS X user, I was surprised to learn that you cannot easily delete files. Directly, that is, without moving them to the trash first. On Windows and Linux this can obviously be done with ease, but not so on the Mac. I noticed this when trying clear up files from a USB memory stick — removing the files ("move to trash") does not free up space; that happens only after emptying the whole system-wide Trash. Not particularly convenient! (It seems stupid to have to empty the whole trashcan just to make some space on the USB stick. There might be gigabytes of stuff in there, and this sort of defeats its purpose - what if you'd actually need to restore something from the trash some day.) So, what's your way of getting around this? Have you bought a 3rd party application like RAW Trash for $16.95 just to delete files, or do you diligently empty the trashcan whenever needed? Or did I miss something? Also, can you convince me that this is actually the way it should be — that users shouldn't be able to fiddle with the filesystem easily? :)

  Read the article

• hp DL380 G4 won't boot with disk plugged into front USB

  - by Kev

  We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

  Read the article

• SQL cluster instance names for large project

  - by Sam

  We're setting up two clusters. One dev and one prod. The Production will host two SQL instances - a OLTP and a DW. The development will host 4 OLTP non-production environments and at least one DW non-production. We're working on getting more DW non-prods and possibly more OLTP systems. I'm considering a naming scheme like this, where PROJ would be 3 initials for the project name. Dev Cluster MSSQLPROJD1\D1 (DEV) MSSQLPROJD2\D2 (TEST) MSSQLPROJD3\D3 (QA) MSSQLPROJD4\D4 (STAGE) MSSQLPROJD5\D5 (DW) Prd Cluster MSSQLPROJP1\P1 (PRD) MSSQLPROJP2\P2 (DW) To the left of the slash, each name must be unique network wide. On each server, the instance name, to the right of the slash, must be unique. Any thoughts on this? I'm trying to avoid having instance names drifting from reality as the project progresses - say we change what we call a certain environment or want to repurpose one. Then we can update a listing of the purposes for the instances and be done with it. How has a scheme like this worked out for you? Maybe you do things another way in your shop - tell me about it. Thanks.

  Read the article

• Green flickering pixels that move with black images

  - by user568458

  Strange question... Occasionally, on my LCD screen, pixels that should be black flicker rapidly and constantly between black and green, about 4 flickers a second. The crazy part is, unlike dead/stuck pixels, they are relative to content on the screen and move with it. For example, I might be looking at a web page with a picture that has lots of black. There might be a couple of green flashing pixels in that black that shouldn't be there. I scroll the page, and the green flickering pixels move with the image. It seems that everyphysical pixel is fine, but somehow something interprets part of the image in a way that causes flickering green... It's not just in a web browser. My first thought was to blame a trolling blogger cunningly uploading an animated gif that simulates a failing pixel... but it happens in a wide range of applications. It seems to occur randomly, other than that it seems to only occur in areas of pure black, and it's always pure 100% green. It happens rarely enough that it's not a big deal, but it's such a strange problem it bugs me. I can't find any info on anything like this. I'm not even sure if it's hardware or software. Any ideas? (windows 7 laptop connected to LCD by DVI to HDMI cable)

  Read the article

• Is there a way to prevent password expiration when user has no password?

  - by Eric DANNIELOU

  Okay, we all care about security so users should change their passwords on a regular basis (who said passwords are like underwear?). On redhat and centos (5.x and 6.x), it's possible to make every real user password expires after 45 days, and warn them 7 days before. /etc/shadow entry then looks like : testuser:$6$m8VQ7BWU$b3UBovxC5b9p2UxLxyT0QKKgG1RoOHoap2CV7HviDJ03AUvcFTqB.yiV4Dn7Rj6LgCBsJ1.obQpaLVCx5.Sx90:15588:1:45:7::: It works very well and most users often change their passwords. Some users find it convenient not to use any password but ssh public key (and I'd like to encourage them). Then after 45 days they can't log in as they forgot their password and are asked to change it. Is there a way to prevent password expiration if and only if password is disabled? Setting testuser:!!:15588:1:45:7::: in /etc/shadow did not work : testuser is asked to change his password after 45 days. Of course, setting back password expiration to 99999 days works but : It requires extra work. Security auditors might not be happy. Is there a system wide parameter that would prompt the user to change expired password only if he really has one ?

  Read the article

• Windows 7 scheduled task returns 0x2

  - by demmith

  I have identical scheduled tasks running in Windows XP Pro and Windows 7. The XP Pro one runs fine, the Windows 7 one always returns 0x2 (which means, "The system cannot find the file specified"; however, executing from the command line is no problem) in the Last Run Result column of the Task Scheduler UI. The scheduled task executes a .bat file daily. The .bat file contains a call to execute a Perl script. As I stated in the previous paragraph, it executes under XP without any trouble but under Windows 7, no dice. The task under Windows 7 is set to "run whether the user is logged on or not." In this case it is me, I am the only user of the system. It is also set to "Run with highest privileges." And it is not hidden. The .bat file executes perfectly well from the command line - it calls the Perl script as expected and the Perl script does its thing. I have searched far and wide looking for an appropriate answer to this issue. So far I have found nothing. What the devil is going on with this Win7 scheduled task? I am ready to pull my hair out.

  Read the article

• Why is Outlook 2007 resizing images in outgoing and incoming HTML email? How can I fix this?

  - by Mikuso

  In my Outlook 2007 client, embedded images in incoming emails appear resized when the message is viewed. The incoming images are resized to 198px wide, despite the original size. If it was larger, it will be shrunk; if it was smaller, it will be enlarged; the aspect ratio remains the same (the image is not stretched). This is local to my client only (i.e. another Outlook 2007 client reading the same IMAP inbox will see the image in the correct size. Similarly, viewing the email message in a browser will display the correct size). This happens regardless of whether width/height attributes are set on the image tag in the HTML. Zoom is set to 100% in my message window; text and other elements are not distorted from the original. In addition to this, outgoing HTML messages with images embedded in the same way are resized as they are sent. The outgoing images are all scaled to have a width of 247px. The source HTML of the outgoing message is changed after pressing Send so that the tag's width attribute is 247 pixels and the image file itself is also resized. These problems only occur with HTML messages; Rich Text messages do not have the same problem. I have already tried reinstalling Outlook and have it fully patched up to date. Why is this happening and how can I stop this?

  Read the article

• Display stretches 4:3 ratios; Adds scrolling to other ratios

  - by Matt

  I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

  Read the article

• How can I use wildcards in an Nginx map directive?

  - by Ian Clelland

  I am trying to use Nginx to served cached files produced by a web application, and have spotted a potential problem; that the url-space is wide, and will exceed the Ext3 limit of 32000 subdirectories. I would like to break up the subdirectories, making, say, a two-level filesystem cache. So, where I am currently caching a file at /var/cache/www/arbitrary_directory_name/index.html I would store that instead at something like /var/cache/www/a/r/arbitrary_directory_name/index.html My trouble is that I can't get try_files, or even rewrite to make that mapping. My searching on the subject leads me to believe that I need to do something like this (heavily abbreviated): http { map $request_uri $prefix { /aa* a/a; /ab* a/b; /ac* a/c; ... /zz* z/z; } location / { try_files /var/cache/www/$prefix/$request_uri/index.html @fallback; # or # if (-f /var/cache/www/$prefix/$request_uri/index.html) { # rewrite ^(.*)$ /var/cache/www/$prefix/$1/index.html; # } } } But I can't get the /aa* pattern to match the incoming uri. Without the *, it will match an exact uri, but I can't get it to match just the first two characters. The Nginx documentation suggests that wildcards should be allowed, but I can't see a way to get them to work. Is there a way to do this? Am I missing something simple? Or am I going about this the wrong way?

  Read the article

• Recommended Smartphone for Reading PDFs [closed]

  - by mika

  This is as much a software than a hardware question. I use a lot of public transport and perhaps the best way to spend your time there is to read while listening to music. Currently I use Nokia E90 and Adobe Reader LE 2.5 (full version). I was wondering if there are any better alternatives? Requirements: at least 640px wide screen, preferably 800px physical size of the LCD display matters, it should be large, but the phone itself should be as small as possible. This favors touchscreen models PDF reader should be of high quality. It should render most PDFs correctly. Other important features include: full screen mode, keyboard controls for Page Down and page change, multiple zoom levels to adjust to the screen, opening recent documents at the last page read Downsides of E90 + Adobe Reader LE Phone is large compared to the display It is hard to read the display at sunlight Adobe Reader crashes the phone regularly, zoom could have more levels, doesn't remember last page EDIT: Switched to iPhone and GoodReader. Smaller physical screen width compared to E90 is a disimprovement, but other than that I'm happy. GoodReader is the highest quality smartphone PDF reader I've seen so far.

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >