Search Results

Search found 19747 results on 790 pages for 'internet cafe'.

Page 610/790 | < Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >

  • Multi Gateway and Backup Routing on a cisco router

    - by user64880
    Hi all, I have a 2611 Cisco Router with only one Fastethernet port Now I have two internet gateways. I want to config my router as when primary routing fails second routing automatically start to route all my packets. When I set 2 IP route command in my router then I check I see it work well but when peer IP on primary routing is down it can not change to second routing until I remove first route command.In the following I write my setting. How can I set it? interface FastEthernet0/0 ip address 81.12.21.100 255.255.255.248 secondary ip address 62.220.97.14 255.255.255.252 ip route 0.0.0.0 0.0.0.0 62.220.97.13 ip route 0.0.0.0 0.0.0.0 81.12.21.97 100 Cheer, Kamal

    Read the article

  • How can I make a vpn network login the default behavior for logging into Windows?

    - by Danny
    To login to the machine, I have to login to our domain. When I am at work, the unauthenticated wireless permits access to the domain. However, the internet is not available until I connect via the vpn. From home, I have to connect via the vpn first, then I can login to the domain. I have successfully setup a network logon with the vpn (following the directions found here). And for the most part it works correctly. (There is an issue with logout/login I haven't figured out just yet). As I currently have to Switch User and select the Network Login button, I'd like to know if it is possible to have the network login the default behavior when logging into the system. This is mostly a usability issue than anything else.

    Read the article

  • Battery not recognized on my laptop (and it recognizes my laptop as a desktop)

    - by AZorin
    I have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried to get the output of cat /proc/acpi/battery/BAT1/state but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root Nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the internet that I could find. Is there any way to change the configuration file(s) that detect the internal hardware of the computer. The /proc directory is a temporary RAM directory afaik. Is there a directory where that data is stored permanently and where the RAM reads if you know what I mean? Thanks in advance. AZorin This issue has been reported as bug #764513.

    Read the article

  • How to remove the dlinksearch browser search hijack

    - by Bish
    Hi Gang, For the last few weeks all the machines on my home network are having the same problem whilst browsing the internet. When the user enters an invalid URL in the browser address bar, instead of the default browser behaviour, the request is sent to http://www1.dlinksearch.com/. As far as I can tell this is all machines and all browsers. It is so consistent I am wondering whether it has anything to do with our router. We use a DLink DIR-655 router so maybe the clue is in the name :) Anyhow, I cannot figure out how to disable/remove the offending behaviour. I've checked hosts files, spyware, AV etc. etc. Anybody have any ideas? Paul P.S. Apologies if this is not the right place to ask this type of question. I'm a bit stuck

    Read the article

  • IPv6 6to4 on Windows Server

    - by Graham Wager
    I'm looking for a relatively simple guide to setting up IPv6 properly on a home network. This network currently has a server (Windows Server 2008R2) running RRAS that establishes connectivity to the internet using a demand-dial PPPoE connection and handles the NAT. It also hosts a DNS server and DHCP. My ISP does not support IPv6, but I have a static IPv4 address. I've read about 6to4 and signed up at tunnelbroker.net, but quickly felt out of my depth. How do I configure my network to use it, and how I should configure my DHCP server with regards to IPv6 addresses?

    Read the article

  • Is there any way to get tree organisation for Windows 7 file explorer favorites?

    - by fostandy
    In XP there was a MenuBar called Favorites which seemed to be based on Internet Explorer Favorites. It was fantastic because it allowed for very fast tree style navigation (if set up correctly you could navigate it using first letter keystrokes, so to access a shortcut named "videos" in a folder named "files" was as quick as Alt-A f v) This was removed in Vista (and imo generally regressed the file explorer). This was fine because I never used it, but I'm resigned to eventually embracing the inevitability that is Windows 7. Dealing with a single non-nested list of favourites is pretty painful to me as I have quite a lot of them. Is there a way to make a tree like favorites structure in Windows 7? My fingers are crossed.

    Read the article

  • hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

    - by user108754
    I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

    Read the article

  • set tap0 using virt-manager for bridged wireless

    - by DaveO
    After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

    Read the article

  • How To Change Attachment Size in WorkItems in TFS 2010

    - by Ravi
    Recently, I came across an issue where I had to change the size limit for WorkItem Attachments in TFS 2010. I searched all around the internet only to find very little information around it which wasn’t clear honestly. So after breaking my head for sometime, I was successful in doing it. Here are my conclusions and the procedure to do it. 1. You DON’T 'have to' programmatically change it. You can do it directly from IIS webservices. 2. You CAN change it programmatically too, by making an entry into TFS Registry using a small piece of code. Let me show you how it is done from IIS. This is to change the size of attachment to your required value for workItems in TFS 2010 for each collection individually. You must be a TFS Admin to do this ( Login with setup account ) Browse to /WorkItemTracking/v1.0/ConfigurationSettingsService.asmx">/WorkItemTracking/v1.0/ConfigurationSettingsService.asmx">/WorkItemTracking/v1.0/ConfigurationSettingsService.asmx">http://localhost:8080/tfs/<YOUR-COLLECTION-NAME>/WorkItemTracking/v1.0/ConfigurationSettingsService.asmx You’ll see 3 asmx services – GetMaxAttachmentSize, GetWorkItemTrackingVersion and SetMaxAttachmentSize. 4. To know what is the current value of the maximum attachment size for a collection, click on the first service and you’ll the current existing value for this particular collection when you click on ‘invoke’ button. ( value is in bytes ) 5. Now click on the ‘SetMaxAttachmentSize’ webservice and fill in the value of your choice. 6. Reset IIS ( not required honestly, but I did it, just to be sure ) 7. Now try attaching a file greater than the size you’ve set. It’ll fail successfully   Below is the error which you’d see in such scenarios. Let me know if you see any issues & I’ll be happy to help..!

    Read the article

  • On VMWare Server, how can I specify which Ethernet port should be the one to be bridged?

    - by DrDavid
    My server has 4 ethernet ports; 1 uses a APIPA address to connect to a DroboElite (that's how they're designed to work), 1 is connected to the LAN, and the other two are unused currently. The issue is that VMWare Server seems to have an affinity to the port that's connected to the Drobo, which means that it can never reach the internet. If I disable the Drobo port, everything works just fine. If I enable the drobo port, nothing works (well, the drobo works, but the virtual machine doesn't ;) ) How can I tell VMWare Server to NOT use the drobo port when I'm bridging the connection?

    Read the article

  • Determine which software product a Microsoft Product Key activates

    - by druciferre
    Without a product key being labelled, is there is any way to identify what Microsoft software product a given product key is meant to activate? Let's say for example I had the product key ABCDE-FGHIJ-KLMNO-PQRST-UVWXY, but I had no clue if was meant for Windows 7 Ultimate, Windows 7 Home Premium, Vista Ultimate, or even Office 2010. Does Microsoft (or anyone for that matter) have any kind of tool that I could paste the key into and get a result that identifies the software product the key is meant for (or at least a good estimate)? Note: I have searched and searched many times on the Internet, but the only results I ever find are how to recover a lost product key by using something like Nirsoft ProduKey. This is not what I am looking for.

    Read the article

  • Ubuntu connects to wireless but doesn't work!

    - by UbuntuUser990
    I just installed Ubuntu 14.04 LTS on my laptop, it connects to my wireless network and shows that it is connected, but when I try to load a webpage or do anything like download Steam for Dota 2, it doesn't work. When I try to connect my Facebook account to Ubuntu, it doesn't work. I want to be able to use Ubuntu with working internet access. What do I do?. ifconfig this shows up eth0 Link encap:Ethernet HWaddr 88:ae:1d:60:56:eb inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) When I type ping askubuntu.com this shows up ping: unknown host askubuntu.com

    Read the article

  • is it possible for a router to provide different gateway?

    - by Hao
    i have tp-link wireless router 192.168.10.188, i was can make it function as DHCP provider(range 192.168.10.100 to 192.168.10.109). the only thing that i cannot make it work as intended, is for it to provide different gateway (192.168.10.1), the computers that obtain IP from that router properly get everything(dynamic IP and dns IP), but there is no function on that router to provide different gateway, the computers always get the router's address(192.168.10.188) as gateway. is there a router that can provide different gateway other than its own address? or the question should be, is the dhcp of a router can provide different gateway other than its own address? note: i cannot make the wireless router address as 192.168.10.1, we have main router(non-wireless, address is 192.168.10.1) that is connected directly to internet

    Read the article

  • openVPN Mac(Tunnelblick) all traffic over vpn

    - by Stony
    Hello@all, the problem is that we want to use openVPN here as default VPN Server. Now we have the same problem like everytime. On Windows all works fine but on Mac we have problems with the routing. When you are logged on to the network all you internet traffic goes through the vpn connection. We have set routes for this in the Serverconfig but they have no effect on the target system. Is here anybody who have a solution for this? thx for you help

    Read the article

  • Are web application usability issues equal to website usability issues?

    - by Kor
    I've been reading two books about web usability issues and tests (Rocket Surgery Made Easy¹ and Prioritizing Web Usability²) and they claim some strategies and typical problems about website usability and how to lead them. However, I want to do a web application, and I think I lost track of what I am trying to solve. These two books claim to work with raw websites (e-commerce, business sites, even intranet), but I'm not sure if everything about web usability is applicable to web application usability. They sure talk about always having available (and usable) the Back button, to focus on short information rather than big amounts of text, etc., but they could be inaccurate in deeper problems that may be easier (or just skippable) in regular websites. Has anybody some experience in this field and could tell me if both web applications and websites share their usability issues? Thanks in advance Edit: Quoting Wikipedia, a website is a collection of related web pages containing images, videos or other digital assets, and a web application is an application that is accessed over a network such as the Internet or an intranet. To sum up, both shows/lets you search/produce information but websites are "simple" in interaction and keep the classics of websites (one-click actions) and the other one is closer to desktop applications in the meaning of their uses and ways of interaction (double click, modal windows, asynchronous calls [to keep you in the same "environment" instead of reloading it] etc.). I don't know if this clarifies the difference. Edit 2: Quoting @Victor and myself, a website is anything running in your browser, but a web application is somewhat running in your browser that could be running in your desktop, with similar behaviors and features. Gmail is a web application that could replace Outlook. GDocs could replace Office. Grooveshark could replace your music player, etc.

    Read the article

  • something is downloading in background Linux

    - by wisdom
    My laptop boots normally to Linux -LinuxMint- and immediately I like to open gnome-system-monitor but the shock is that something is downloading(the problem has been out 2 days ago) and nothing I run yet ! I did iftop in terminal but nothing strange -a screen shot provided-, also I tried nethogs which showed nothing at all. The more complicated when I reboot and same problem is there so I can't browse/surf Internet, no one connected to my network can browse any more it's absorbing the stream horribly! After many reboots it will go to normal state(no background downloading). But really I can't figure out the problem going behind the scene ! Any suggestion,any help would be appreciated...thanks

    Read the article

  • JavaOne Latin America Sessions

    - by Tori Wieldt
    The stars of Java are gathering in São Paulo next week. Here are just a few of the outstanding sessions you can attend at JavaOne Latin America: “Designing Java EE Applications in the Age of CDI” Michel Graciano, Michael Santos “Don’t Get Hacked! Tips and Tricks for Securing Your Java EE Web Application” Fabiane Nardon, Fernando Babadopulos “Java and Security Programming” Juan Carlos Herrera “Java Craftsmanship: Lessons Learned on How to Produce Truly Beautiful Java Code” Edson Yanaga “Internet of Things with Real Things: Java + Things – API + Raspberry PI + Toys!” Vinicius Senger “OAuth 101: How to Protect Your Resources in a Web-Connected Environment” Mauricio Leal “Approaching Pure REST in Java: HATEOAS and HTTP Tuning” Eder Ignatowicz “Open Data in Politics: Using Java to Follow Your Candidate” Bruno Gualda, Thiago Galbiatti Vespa "Java EE 7 Platform: More Productivity and Integrated HTML" Arun Gupta  Go to the JavaOne site for a complete list of sessions. JavaOne Latin America will in São Paulo, 4-6 December 2012 at the Transamerica Expo Center. Register by 3 December and Save R$ 300,00! Para mais informações ou inscrição ligue para (11) 2875-4163. 

    Read the article

  • Not able to connect to local network

    - by Roopesh
    I have installed Kubuntu , I am able to connect to Internet and able to access external sites, but in my local network i have bugzila installed that i am not able to access, even i am not able to ping the gateway also 192.168.1.1 . below is the result of ifconfig command Please help . Thanks ~# ifconfig eth0 Link encap:Ethernet HWaddr b8:70:f4:da:f9:a8 inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:884 errors:0 dropped:0 overruns:0 frame:0 TX packets:884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:81131 (81.1 KB) TX bytes:81131 (81.1 KB) wlan0 Link encap:Ethernet HWaddr 68:5d:43:2e:1c:79 inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe2e:1c79/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2446 errors:0 dropped:0 overruns:0 frame:0 TX packets:2324 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1909441 (1.9 MB) TX bytes:393292 (393.2 KB)

    Read the article

  • Installing Ubuntu 12.04 on a single GPT SSD which contains Windows 7

    - by Gary
    I recently bought a brand new 64 bit PC with a (ASUS) motherboard that supports UEFI and a GPT formatted 240Gb SSD, which contains Windows 7 in the first of 3 (80Gb) partitions. When the system arrived, it booted into Windows 7 like a dream, with no problems. I did not originally want Windows, but the manufacturer does not work with Linux (of any flavour), so I thought I would install Ubuntu into the second partition and dual boot. I downloaded the 12.04 64bit version and proceeded to install. Having selected to 'install', the screen became corrupted, with multicoloured garbage across the middle third of the screen !! So, I rebooted and --- MISSING OPERATING SYSTEM !!! The only way I can now get into Windows is via Super Grub2. First question - what went wrong ? 2nd - Will Ubuntu install on a GPT disk partition ? 3rd - Will it install alongside Windows 7 without screwing the boot mechanism ? 4th - How do I do it ? I have scoured the internet looking for appropriate answers and found NONE ! Please help.......

    Read the article

  • Routing from the DMZ to the interior network only

    - by Allan
    I have a home network connected to Verizon's FIOS service. Verizon's ActionTec router is connected to the ONT via coax to establish the MOCA network. My DD-WRT router's WAN port is connected to one of the ActionTec's LAN ports. The DD-WRT router is configured with a static IP address and assigned to the DMZ (this is done so I only have to configure port forwarding once). My issue is that this does not allow computers connected to the DD-WRT to serve streaming audio/video to the MOCA network using Verizon's Media Manager. I know that Media Manager uses ports 18001, 5050, and 5060, but I don't know how to forward those ports so that they are only available to the ActionTec's network and not the rest of the internet.

    Read the article

  • Is there no such thing as a Gigabit switch?

    - by Torben Gundtofte-Bruun
    According to the manufacturer specification, even my rather plain desktop computer has "Gigabit Ethernet". So when I want to copy large files over the LAN (not Internet) it would make sense to have a gigabit switch. I'm searching eBay for a gigabit switch for a planned home network upgrade. The products I find are all labeled "gigabit" but they all have 24 x 10/100Mbit autosensing ports and sometimes 2 x 10/100/1000Mbit autosensing ports. It was my understanding that 10/100 is ancient and that modern computers have network interfaces that work with 1000Mbit, so it would make sense to get a switch that has 24 x 1000Mbit ports. Did I misunderstand, or are sellers (deliberately?) mislabeling older hardware? (Let's not dive into wired vs. wireless networks and how "N" wireless is fast. You'd be right, but not answering the question.)

    Read the article

  • How to check if PAE is enabled? (Windows 7 32 bits)

    - by Altar
    How to tell for sure if PAE (Physical Address Extensions) is enabled or not? There is a SPECIFIC command I can use? I can read a registry value or something? (Windows 7 32 bits) I have found this on Internet but it doesn't answer my question: If your server has hot-add memory ability (ability to add more memory without shutting down the server !!) or data execution prevention (DEP) is enabled then PAE will be enabled automatically !! It only reformulate the question as "does my Qosmio x505 laptop support hot-add memory?"

    Read the article

  • Possible to get OpenDNS to dereference Host on VPN?

    - by Scott P
    I recently changed ISPs for my home internet. I am now having some trouble getting back into the corporate network from home over the VPN. I have figured out the OpenDNS is resolving the Hosts on the VPN incorrectly when I am using TCP/IP. When I browse to one of the hosts on corporate network, i.e. \host1, from the file manager this succeeds. However, when I ping the host, i.e. ping host1, the IP address is resolving to the OpenDNS name server instead of the actual Host IP address. Does anyone know how to make this work? On a hunch, I turned off type correction. But, this did not help.

    Read the article

  • De-index URL paremeters

    - by Doug Firr
    Upon reading over this question is lengthy so allow me to provide a one sentence summary: I need to get Google to de-index URLs that have certain parameters appended I have a website example.com with language translations. There used to be many translations but I deleted them all so that only English (Default) and French options remain. When one selects a language option a parameter is aded to the URL. For example, the home page: https://example.com (default) https://example.com/main?l=fr_FR (French) I added a robots.txt to stop Google from crawling any of the language translations: # robots.txt generated at http://www.mcanerin.com User-agent: * Disallow: Disallow: /cgi-bin/ Disallow: /*?l= So any pages containing "?l=" should not be crawled. I checked in GWT using the robots testing tool. It works. But under html improvements the previously crawled language translation URLs remain indexed. The internet says to add a 404 to the header of the removed URLs so the Googles knows to de-index it. I checked to see what my CMS would throw up if I visited one of the URLs that should no longer exist. This URL was listed in GWT under duplicate title tags (One of the reasons I want to scrub up my URLS) https://example.com/reports/view/884?l=vi_VN&l=hy_AM This URL should not exist - I removed the language translations. The page loads when it should not! I played around. I typed example.com?whatever123 It seems that parameters always load as long as everything before the question mark is a real URL. So if Google has indexed all these URLS with parameters how do I remove them? I cannot check if a 404 is being generated because the page always loads because it's a parameter that needs to be de-indexed.

    Read the article

  • Testing UDP port connectivity

    - by Lock
    I am trying to test whether I can get to a particular port on a remote server (both of which I have access to) through UDP. Both servers are internet facing. I am using netcat to have a certain port listening. I then use nmap to check for that port to see if it is open, but it doesn't appear to be. Iptables is turned off. Any suggestions why this could be? I am eventually going to setup a VPN tunnel, but because I'm very new to tunnels, I want to make sure I have connectivity on port UDP 1194 before advancing.

    Read the article

< Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >