Search Results

Search found 22224 results on 889 pages for 'point of sale'.

Page 612/889 | < Previous Page | 608 609 610 611 612 613 614 615 616 617 618 619  | Next Page >

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I have Mac OS X 10.6.3 and VMWare 7.1. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Diagnosing permission problems with Cobian Backup to network share

  - by DaveBurns

  I'm running the latest Cobian 11. I have a Synology DS412 NAS. All of my machines (Mac and Windows) access this just fine when I'm logged in and I browse to it manually. I have Cobian installed as a service on two Windows machines: WinXP SP3 and Win7 x64. On both machines, the service is set to log on with my user account which is in the Windows administrator group. Backups on both machines fail with the message "Couldn't create the destination directory "\nas1\backups\foo\bar\": The filename, directory name, or volume label syntax is incorrect". I have tried setting the NAS's share to allow anonymous read/write access but it made no difference. Although I want the backups to run unattended in the middle of the night, I have tested them by running them manually while I'm logged in but no luck. Before starting that, I make sure that I can browse to the NAS with Explorer to ensure that any authentication session with Windows and the NAS has not expired. Still no luck. I have tried creating that destination directory both on the NAS before the backup and deleting it so the backup job could create it with the client's credentials but no luck. The usual answer in the Cobian support forums is that there is a permission problem. I agree. But at this point, what can I do to diagnose this further?

  Read the article

• This operation has been canceled due to restrictions in effect on this computer. Please contact your

  - by WebDude

  I am having a highly annoying problem on Windows 7 with Microsoft Outlook 2007. Whenever I click on any hyperlinks I am present with the message This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator and let's not forget the most ear-piecing "DING" to accompany this wonderful informative message. Now I have searched the web high and low for a solution here and most sources suggest the same solution of resetting your IE as your default browser. Tried .. failed A lot of sources suggest this has something to do with installing and uninstalling chrome. I have never installed Chrome but am actually consdering this to see if it by some chance fixes my computer. A lot of sources also point to a microsoft kb article 325478 which is focused around Windows XP and totally unrelated to my problem. I see there are some other queries on SuperUser with no resolution. Please can someone help solve this highly annoying issue. I am running Window 7 professional x64 Microsoft Office 2007 Microsoft Security Essentials Running in a windows work group with default policy settings HELP!

  Read the article

• Mod Rewrite Help - Pseudo-Subdirectories

  - by Gimpyfuzznut

  I am dealing with a frustrating problem with Joomla that is going to require some url trickery. The idea is straight-forward but after reading a bunch of guides for mod-rewrite, I still can't seem to get it work. Let's say my site is www.mysite.com. Joomla is already performing some rewriting for SEF urls so I have links like www.mysite.com/home and www.mysite.com/news and so on. I want to be able to have (4) pseudo-subdirectories like www.mysite.com/mode1/ and www.mysite.com/mode2/ and so on. These subdirectories should work as if the subdirectory isn't there, ie both www.mysite.com/mode1/home and www.mysite.com/mode2/home should pull up the same www.mysite.com/home. It should point any www.mysite.com/mode1/anypagehere to www.mysite.com/anypagehere. The reason I am asking for this is because I will be reading the url for mode1, mode2, etc, to modify the template page. There will be a landing page that will direct people to /mode1/ and /mode2/ etc and the template will change based on that. Note, that I don't want to actually pass a parameter to the url accessible by a GET or whatever because Joomla removes it (perhaps because of my current mod_rewrite settings). I've pasted the current .htaccess file. RewriteBase /joomla ##########Rewrite rules to block out some common exploits RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] # Block out any script trying to base64_encode crap to send via URL RewriteCond %{QUERY_STRING} base64_encode.*\(.*\) [OR] # Block out any script that includes a <script> tag in URL RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Send all blocked request to homepage with 403 Forbidden error! RewriteRule ^(.*)$ index.php [F,L] ########## Begin - Joomla! core SEF Section RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/index.php RewriteCond %{REQUEST_URI} (/|\.php|\.html|\.htm|\.feed|\.pdf|\.raw|/[^.]*)$ [NC] RewriteRule (.*) index.php #RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] ########## End - Joomla! core SEF Section

  Read the article

• Task scheduler "hidden" only hides task, not process

  - by Brandi

  I am trying to make an application that acts like a desktop application for all the computers in our network. I have already got a windows forms app that works like I want it to, and I'm using the task scheduler to start it on login. We would really like it if the process as well as the task is hidden from the task manager in order to avoid accidental deletion. Selecting "Hidden" in the task scheduler hides the task (good!) but the process is still visible (not good enough). I tried using the option to run as "SYSTEM" or "LOCAL SERVICE" so that the user would get "access denied" when trying to delete or just wouldn't even view it by default. However, running as a service makes the process invisible on Vista and 7, and the point of my app is to display information interactively. (User can click, sort, etc). Is there any other alternatives to either run the process as someone/something besides the logged in user and still have the logged on user be able to see and interact with it? (Therefore it would list as someone else's app?) From what I've read on the internet, the only ways to actually hide something from the task manager seem hacky and/or difficult and rather involved. I don't really want to write a bunch of C or whatever only to maybe not have it work on Vista/7 anyway. Besides which, for a legitimate app with a legitimate use, I shouldn't have to go to those extremes... I see "Access Denied" all the time for system processes... why is it so hard for me to do the same? So does anyone have any simple solutions? Is it easier than I think to just list something in the task manager as another user? Thanks in advance for any replies.

  Read the article

• syspolicy_purge_history generates failed logins

  - by jbrown414

  I have a development server with 3 instances: Default, A and B. It is a physical server, non clustered. Whenever the syspolicy_purge_history job runs at 2 am, I get failed login alerts. Looking at the job steps, all are successfully completed. It appears that some point during the step "Erase Phantom System Health Records" is when the failed logins occur. syspolicy_purge_history on instance B works OK. syspolicy_purge_history on the Default instance seems to want to connect to instance B, resulting in: Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-B'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . No errors are reported by Powershell. syspolicy_purge_history on the A instance seems to want to connect to the Default instance resulting in Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-Default'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . Then it tries to connect to the B instance, resulting in Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-B'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . No errors are reported by Powershell. I tried the steps posted here hoping they would fix it. http://support.microsoft.com/kb/955726 But again, this is not a virtual server nor is it in a cluster. Do you have any suggestions? Thanks.

  Read the article

• SQL Server 2008 Cluster Installation - First network name always fails

  - by boflynn

  I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

  Read the article

• How do you install/configure JBoss on Linux/Unix?

  - by mafro

  I'm currently working on how install and configure multiple (30+) JBoss EAP 5 configurations (both standalone and clusters) for development, test and production at a client's site (running SuSE). I'm not to fancy about the jboss way of storing application/configuration together with system files, so I have tried to split things up (ie moving server config out of the jboss installation directory). I also would like minimize the amount of configuration needed when upgrading/patching jboss - but I'm not done thinking about that... It would be great to hear how you've done and what you think about my approach. This is how my installations look like (for the moment): Standard JBoss EAP install (minus server configs): /opt/jboss/jboss-eap-5.0/jboss-as /opt/jboss/jboss-eap-5.0/jboss-as/bin/ /opt/jboss/jboss-eap-5.0/jboss-as/lib/ /opt/jboss/jboss-eap-5.0/jboss-as/server/ [server configs removed to avoid starting them by mistake] /opt/jboss/jboss-eap-5.0/jboss-as/.../ Application (some jboss folders has been omitted - you'll get the point anyway): /app/<project>/ [$app.dir - application specific base folder] /app/<project>/jboss/ [$jboss.home] /app/<project>/jboss/bin/ -> /opt/jboss/jboss-eap-5.0/jboss-as/bin /app/<project>/jboss/lib/ -> /opt/jboss/jboss-eap-5.0/jboss-as/lib /app/<project>/jboss/server/<cfg>/ [project specific config based on 'production'] /app/<project>/jboss/server/<cfg>/log/ -> /log/<project>/<cfg> /app/<project>/jboss/server/<cfg>/... /app/<project>/jboss/.../ -> /opt/jboss/jboss-eap-5.0/jboss-as/.../ /app/<project>/bin/ [application specific scripts for start/stop etc - wraps jboss supplied scripts] /app/<project>/deploy/ [application deploy folder] /app/<project>/etc/ [application specific config] Questions: How do you install JBoss (on linux/unix systems)? Where do you put JBoss and what modifications do you do? Where do you put your applications and application specific files? Do you share JBoss instances between applications or run one instance/cluster per application? How do you manage configuration changes (i.e. your modifications of jboss standard config)?

  Read the article

• FTP Error: 550 Cant change directory to /: Permission denied

  - by Alessandro Merletti de Palo

  I installed Pureftpd and Ispconfig3 on my server. Starting from the point I'll probably uninstall ispconfig3 and make things directly on the server, now I am so stubborn I really want to see where's the problem. I created a ftp user through ispconfig, named amdpftp. It is related to a server user named web7. It logs in with username and password, but if i try to ls, it tells me: FTP Error: 550 Cant change directory to /: Permission denied I thought many things, like: 1. It is a problem of permissions. I went to /var/www/clients/client0/web7 , it was immutable and owned by root. Chattr -i and chown web7:client0 changed permissions, but with no effect. I restored to root:root, and made it immutable again. 2. I make some mistakes in the pureftpd installation: Wrong, it works pretty fine. The pureftpd.log doesn't seem to say anything bad. 3. The pureftpd.log file is only the pureftpd one, I should also check the mysqld functionality, as it is in a mysql database that user, password and working directory are stored. I enabled logging in the my.cnf, but also in the ispconfig database operation there wasn't anything wrong. Then I mkdir testftp in /var/www, chown web7:client0, and edited amdpftp user root directory from /var/www/clients/client0/web7 into /var/www/testftp . Guess what? It worked. So, now I know: 1. The PureFtpd works pretty fine 2. The mysql ispconfig database as well 3. The username and password of the virtual user created by ispconfig into pureftpd work 4. The correlation between username and password and the user web7 and the group client0 does work. What kind of magic has been cast upon the ispconfig directories [/var/www/clients/*] that block ftpusers to operate?

  Read the article

• How do I leverage Bitlocker cmdlets?

  - by user1418882

  This article hints at being able to unlock a bitlocked drive using: Unlock-BitLocker -MountPoint -Password However, I know diddly squat about Powershell and how to use the Powershell cmdlets to do what I want to do. So, how do I do use the above to do something like the following? Unlock-BitLocker -MountPoint D:\ -Password "password" Currently about as much as I know how to do is start Powershell and that's it. I don't want to learn masses of Powershell to get to the point where I can do this. All that I need to know in enough to know how I can execute the commands that are pointed out in the first link. So far in the powershell prompt if I past in: Unlock-BitLocker -MountPoint D:\ -Password "password" I get the following error: The term 'Unlock-BitLocker' is not recognized as the name of a cmdlet, function, script file, or operable program. Chec k the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:17 + Unlock-BitLocker <<<< -MountPoint D:\ -Password "password" + CategoryInfo : ObjectNotFound: (Unlock-BitLocker:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException This is most likely because I don't have any clue about how the commands on the initially linked page work in a powershell context. This is so that I can answer my own question here: Bitlocker and scheduled task (powershell) script to unlock non-system drive

  Read the article

• powershell v2 remoting - How do you enable unecrypted traffic

  - by Peter Walke

  I'm writing a powershell v2 script that I'd like to run against a remote server. When I run it, I get the error : Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Unencrypted traffic is currently disabled in the client configuration. Change the client configurati on and try the request again. For more information, see the about_ Remote_Troubleshooting Help topic. I looked at the online help for about _ Remote_Troubleshooting, but it didn't point me towards how to enable unecrypted traffic. Below is the script that I'm using that is causing me problems. Note: I have already run Enable-PSRemoting on the remote machine to allow it to accept incoming requests. I have tried to use a session option variable, but it doesn't seem to make any difference. $key = "HKLM:\SOFTWARE\Microsoft\PowerShell\1\ShellIds" Set-ItemProperty $key ConsolePrompting True $tvar = "password" $password = ConvertTo-SecureString -string $tvar -asPlainText –force $username="domain\username" $mySessionOption = New-PSSessionOption -NoEncryption $credential = New-Object System.Management.Automation.PSCredential($username,$password) invoke-command -filepath C:\scripts\RemoteScript.ps1 -sessionoption $mySessionOption -authentication digest -credential $credential -computername RemoteServer How do I enable unencrypted traffic?

  Read the article

• map subdomain to another subdomain via cname

  - by Stephen

  Question: I need to get DNS configured to point a subdomain from one domain (which I will generally not be controlling) to another subdomain on a different domain name. Testing this process using a simple CNAME entry keeps pointing to the primary domain and not the subdomain where it should be going. This is the scenario; (newdomain.com is in my control) cdn.xyz.com should display content from this subdomain subdomain.newdomain.com It is instead displaying content from newdomain.com (not the subdomain sub domain) cdn.xyz.com/page.htm displays content from newdomain.com/page.htm although what I need is it to display content from subdomain.newdomain.com/page.htm Other Background: setup is between two different servers with different IP ranges although DNS cluster is on between all servers the newdomain.com is set up with its own unique IP (which is on the A records for the subdomains, the subdomains work as expected/normal) the DNS entry is correct (cdn CNAME subdomain.newdomain.com.) ie the end period is included a DNS lookup on the CNAME externally reports back as subdomain.newdomain.com. as the record Does anyone know what DNS entries I am missing to get this working correctly ? Note: I do not want to just put a redirect between domains as I need the content of subdomain.newdomain.com/content.html to be visible via the URL of cdn.xyz.com/content.html also I can just use some redirects on newdomain.com to achieve what I am after but would prefer to just get the DNS correct. EDIT Current DNS cdn CNAME subdomain.newdomain.com. || CNAME entry for domain1 subdomain A XXX.XXX.XXX.XXX || A record entry for working subdomain pointing to unique IP What should happen is that cdn.domain1.com - subdomain.newdomain.com What is happening is cdn.domain1.com - newdomain.com (ie. the root not the subdomain) EDIT 2 Actually if its easier I am trying to emulate a simple cloud setup like Rackspace Containers (which I assume is similar to Buckets on AWS). although it is not for cloud storage Where a container has a url reference of hd62321678d323.rackspace.com (in truth they are much longer) so I can use a CNAME record of: cdn CNAME hd62321678d323.rackspace.com. so that http://cdn.mydomain.com/myfile.jpg displays content from http://hd62321678d323.rackspace.com/myfile.jpg

  Read the article

• linux LVM mirror vs. MD mirror

  - by sims

  I think I remember making some mirrors years ago with LVM, and I don't remember this "log" thing. Or maybe I made the mirror with mdadm and put LVM on top. That must be it. What is the LVM log for if it is just a mirror? What is stored there? What is it's purpose? Is using "--mirrorlog core" bad? What's the down side? I don't want to have to have another partition for logs if I don't have to. Any recommendations on using either technology? Even if I make the mirror with mdadm, I'll use LVM on top of that. So, in that case, maybe it's better to have the whole setup built with LVM...? Would that take more a performance hit or less? The disks are for storing Xen domU "disks". Sorry for the complex not-to-the-point "question". Ideas and suggestions and links are most welcome. Thanks!

  Read the article

• Android SDK emulator freezes on a Mac running OS X 10.6 Snow Leopard

  - by Donald Burr

  I'm having trouble running the Android SDK on both of my Macs running OS X 10.6.2 Snow Leopard. This appears to be a 64 bit vs. 32 bit issue, as Snow Leopard now defaults to 64-bit everything, including the Java virtual machine. I found this webpage with instructions on how to get the Android tools to run in the 32-bit Java VM, and I am now able to run the Android GUI tool to download SDK files, create AVM's, etc. However, when I try the Hello World tutorial and get to the point where I run my application under the Android emulator, everything goes south. The emulator appears to start but it hangs (spinning beachball of death cursor) without displaying anything. (This only hangs the emulator; the rest of the system still works fine.) If I follow the exact same steps (minus the 32-bit java hack) in a Windows virtual machine, everything works fine. Googling didn't yield anything useful (except for the 32-bit java hack I spoke of earlier). This occurs on both my Mac Pro tower and 13" MacBook Pro. Does anyone have any suggestions?

  Read the article

• Invalid format for New Relic licence when installing on Elastic Beanstalk

  - by BenFreke

  We've created an app that is running on an Elastic Beanstalk instance, 64 bit PHP version 5.4 (so not legacy). I've used the New Relic installation instructions to install New Relic, and viewing phpinfo shows that New Relic is installed. However, I'm not getting any data in New Relic and that is because it is saying that the licence is ***invalid format*** under newrelic.licence I'm getting the licence from my New Relic account, and it is a 40 character hexadecimal string. Here is the current newrelic.config file in the .ebextensions folder I'm using, with most of the licence key commented out. packages: yum: newrelic-php5: [] rpm: newrelic: http://yum.newrelic.com/pub/newrelic/el5/x86_64/newrelic-repo-5-3.noarch.rpm commands: configure_new_relic: command: newrelic-install install env: NR_INSTALL_SILENT: true NR_INSTALL_KEY: ec9a4... Skitch of relevant phpinfo Can anyone shed some light on what's going on here? I've tried two different New Relic licence keys with the same error, I've also surrounded it with a single quote mark and tried uppercase only. And at this point I'm out of ideas on what to try. We're not AWS gurus so it could very easily be something simple like not opening a port to allow the licence to be validated?

  Read the article

• Windows 8 DLNA streaming of MKV files

  - by dbb

  I have a Samsung TV that is capable of playing MKV files. The Windows DLNA Play To menu that appears when you right-click a media file does not support MKV files, but a simple trick has been to change the file extension from .mkv to .avi so the Play To context menu item would appear. At that point I could successfully stream from my computer to my TV. However, this does not appear to work in Windows 8. Doing the same thing in Windows 8 causes the Play To window to open but the file does not get played. Dragging and dropping the file in the Play To window causes it to be silently ignored. Using actual AVI, MP4, etc. files works, of course. It appears Windows 8 is now doing some kind of validation on the file that Windows 7 wasn't previously. The Play To window does not show any kind of obvious error message or warning and there is nothing in the Windows event log. So, is there a way in Windows 8 to stream MKV files to a DLNA device without converting it to another container format? I would rather not use extra third-party software, but I would consider it if it's purposefully designed for this simple case rather than a more robust "media library/server" solution.

  Read the article

• i5 540M or i7 720QM for laptop running VMs and software development tools?

  - by Donald Hughes

  I'm a software developer that would primarily be running Windows 7 as the primary operating system. On a typical day, I might, at any given moment, be running Visual Studio, Expression Web, SQL Server developer (and Management Console), IIS, Photoshop, a dozen browser tabs in 2-3 different browsers, Skype video chat, streaming music, and a couple of VMs (WinXP and Ubuntu) for testing/experimentation. Obviously, RAM is a concern, which is why I plan to use 8 GB so I can devote enough to the VMs to be usable. I'm also tempted to use an ExpressCard SSD for storing the VM disks to ease disk contention. And I know that that is asking a lot from a laptop, and I should just use a desktop, but I need to be able to take my work with me between several locations. It seems that at a reasonable price point, it comes down to the i5 540M versus the i7 720QM. I'm leaning toward the i7 since it would allow me to dedicate a whole hyperthreaded core to each VM, and still have two cores left for the primary OS. I've heard that the i5 has better battery life, but I'm curious for my scenario if there would be a meaningful difference. I don't usually work without a plug, but I do occasionally ride the train or fly and it would be nice to have at least 3 hours of juice for unusual circumstances. And, finally, for this usage scenario, would a dedicated video option be preferred over the i5's integrated video? It sounds like Visual Studio 2010 (and Windows 7) can take advantage of the video card.

  Read the article

• Why is my mouse randomly deselecting and unclicking?

  - by Coldblackice

  (Windows 7 x64, Logitech MX1100 mouse) If I click/hold/ the mouse, like on the title bar of a folder to move it, or to select text, the mouse will randomly "unselect" it and then randomly reselect at another point in the movement. For example, if I were to start mouse-selecting the above paragraph, starting with "movement." and then moving backwards, it might select as far as "reselect", but then the selection would disappear, only to start selecting again from "will randomly". I realize this would sound like a clear-cut case for a hardware issue in the mouse button, but I've narrowed out that that's not the case. The problem doesn't happen if I drag-move/drag-select slowly. But I can make the problem very apparent if I click and drag something fast. For example, if I click and hold the title bar of a window, and then start quickly dragging it around in circles across my monitor, the window will get "dropped", and a new window will get picked up in the process. Additionally, if I right-click anywhere to get a context menu (in Windows, programs, anywhere/everywhere), and then relatively quickly press the left mouse button to select something on the context menu, the context menu will disappear as if I had clicked "through" it. I haven't had any driver changes, system updates, or significant software changes/updates/installations recently, that might be a precursor to this issue. Again, the oddity seems to be the "speed" of action. Another note -- it seems that "lag" has a bit to do with it. If I click and drag a window around quickly, it might start to "lag" a tad bit, like it's perhaps moving too fast for Windows to keep up with the refresh/redraw rate, and that's usually synonymous with this odd deselect bug happening. (Batteries fully charged, no damage or recent changes to mouse, no changes that might affect/block wireless communication)

  Read the article

• Random software/shutdown problems Mac mini

  - by Oliver

  Hello I have a Mac mini using OS X 10.5.8. Recently I've been having problems that are becoming increasingly severe. Particular symptoms: Firefox "quits" but the dot on the dock remains. If I try shutting down at this point I can't and have to use the power button. I can't start Firefox either. Significantly higher than normal crash rate for CS4 Illustrator Photoshop and Dreamweaver. If Firefox remains open when sleeping the Mac, on waking up firefox is completely unresponsive and must be restarted. Can cause problem 1. Today I lost all my FTP settings for Dreamweaver CS4 Bluetooth switches on when booting despite being switched off. Network password retention is somewhat erractic. Tried running Apple Hardware Test as described in the manual. Cannot access install disk by pressing D at startup. My pen tablet (Bamboo) lost my preferences. Tried unstalling software and now cannot re-install. I've never had problems of this level outside warranty before so I don't know much about debugging Macs. Solutions attempted: Disable bluetooth (see problem 5) Disable time machine Run appple harware test (see problem 7) Tried using activity monitor but don't know which processes are normal Tried uninstalling more recent software. I don't have any idea what to do. It seems like a hard disk failure but I don't have the know how to continue.

  Read the article

• Configure Postfix to send/relay emails Gmail (smtp.gmail.com) via port 587

  - by tom smith

  Hi. Using Centos 5.4, with Postfix. I can do a mail [email protected] subject: blah test . Cc: and the msg gets sent to gmail, but it resides in the spam folder, which is to be expected. My goal is to be able to generate email msgs, and to have them appear in the regular Inbox! As I understand Postfix/Gmail, it's possible to configure Postfix to send/relay mail via the authenticated/valid user using port 587, which would no longer have the mail be seen as spam. I've tried a number of parameters based on different sites/articles from the 'net, with no luck. Some of the articles, actually seem to conflict with other articles! I've also looked over the stacflow postings on this, but i'm still missing something... Also talked to a few people on IRC (Centos/Postfix) and still have questions.. So, i'm turning to Serverfault, once again! If there's someone who's managed to accomplish this, would you mind posting your main.cf, sasl-passwd, and any other conf files that you use to get this working! If I can review your config files, I can hopefully see where I've screwed up, and figure out how to correct the issue. Thanks for reading this, and any help/pointers you provide! ps, If there is a stackflow posting that speaks to this that I may have missed, feel free to point it out to me! -tom

  Read the article

• Why does my Intel HDA onboard sound card not have a "Mix" device / channel?

  - by Hanno Fietz

  I want to be able to record what my sound card outputs on the speakers / headphones. This question is all over the interwebs again and again, and there seem to be two outcomes: in your selection of audio input devices, there's a device called "Stereo Mix", or similar, which is the "loopback" device for audio. Choose that in your recording tool and you're done. there's no such device and only speculative posts about why that may be. Now, I'm using ALSA and an Intel HDA chipset on my mainboard under Kubuntu Karmic. I have some 5-10 output channels and "Mic", "Front Mic" and "Line" for input. All of those are available in KMix, Audacity and other software. No "loopback" / "Mix" / whatever. Do I have to get some driver / kernel module set up ALSA in some way set up my system configuration in some way use a software solution (such as JACK) I had a look at JACK, and found it rather hard to understand, it's either an expert tool or just clumsy, I couldn't say. At least, I wasn't able to figure out how to achieve what I wanted. One of my problems seems to be that I don't understand where and how the mixing happens. Are there sound cards which just aren't able to do it? Why does the sound card matter at all, since I could in theory grab the data stream at some point before it goes to the hardware, right?

  Read the article

• Cannot delete a SharePoint web application

  - by Vijay

  What I have? I have normal web application and it has 3 site collections with name, "PDirectory". Other than this I have only Central administration web application in the farm. What I want? I want to delete that web application, "PDirectory". What problem am I facing? I am not able to delete the web application. I get below error when I try to delete it but, the site collections got deleted! Error: An object in the SharePoint administrative framework, "SPWebApplication Name=XXX Parent=SPWebService", could not be deleted because other objects depend on it. Update all of these dependants to point to null or different objects and retry this operation. The dependant objects are as follows: SPFarm Name=SharePoint_Config SPFarm Name=SharePoint_Config at Microsoft.SharePoint.Administration.SPConfigurationDatabase.DeleteObject(Guid id) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.DeleteObject(SPPersistedObject obj) at Microsoft.SharePoint.Administration.SPPersistedObject.Delete() at Microsoft.SharePoint.Administration.SPWebApplication.Delete() at Microsoft.SharePoint.ApplicationPages.DeleteWebApplicationPage.BtnSubmit_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) Can somebody tell me how I can delete this web application? Thanks in advance!

  Read the article

• Windows 7 Folder Redirection (GPO)

  - by Kev

  Hi - I have been fighting this issue for a day or two now, so I am looking for some insight. I am taking over admin duties in a domain of 800 users, and the previous admins really did not employ much of any GPO settings for the clients of the Domain. In each site, there is a location on the file server where "Home" folders were manually created. EX: \server\home\enduser Whenever a user got a machine, the admin would manually right-click on the "My Documents" folder and manually enter the path to the home folder. We are planning to start putting Windows 7 machines on the Network, and I am wanting to automate as much as I can, everything that was not done in the past. Since everyone has exising "Home" folders I have been fighting and trying to get Folder Redirection to work with a new Windows 7 machine (In a Test OU). I am getting all kinds of errors and I can't get the Windows 7 "Documents" folder to redirect to the users EXISTING home folders. As I stated earlier, all of the Home folders were (and still are) manually created on the File Server and are set with the following Security permissions - Domain Admins - Full Control euser (end user) - Modify (Everything but Full) Can someone point me in the right direction on the proper setting to put in the Folder Redirection GPO to get this to work with the Existing Home folders. I can't seem to make it work but I will keep trying. Thanks In Advance !

  Read the article

• API numbers don't match on compiled PHP extension

  - by tixrus

  I'm trying to get GD into my PHP. I recently installed PHP5.3.0 on my system running Mac Leopard using mac ports. It did not come with the gd module. So I downloaded gd, compiled it as an extension module as per http://www.kenior.ch/macintosh/adding-gd-library-for-mac-os-x-leopard, made php.ini point to it, restarted apache etc. But no GD. So in apache error log it says PHP Warning: PHP Startup: gd: Unable to initialize module\nModule compiled with module API=20060613\nPHP compiled with module API=20090115\nThese options need to match\n in Unknown on line 0 So a bit of googling says I should not use the phpize I have before configuring and making these. I should use a new one called phpize5. I surely don't have any such thing. Unless its packed up inside something else in my php5.3. distro. Where do you get it. In Ubuntu I could just run sudo apt-get install php-dev, (apparently) and it would just appear by magic. At least that's what the webpage said. Unfortunately I am running MacOSX version Leopard. How can I build this GD module on Leopard so that it will match the API number in my PHP?

  Read the article

• apache Client Certificate Authentication errors: Certificate Verification: Error (18): self signed certificate

  - by decoy

  So I have been following instructions on setting up Client Certificate Authentication in Apache2 w/ mod_ssl. This is solely for the purpose of testing an application against CAA, not for any sort of production use. So far I've followed http://www.impetus.us/~rjmooney/projects/misc/clientcertauth.html for advice on generating my CA, server, and client encryption information. I've put all three of them into /etc/ssl/ca/private. I've setup the following additional directives in my default_ssl site file: <IfModule mod_ssl.c> <VirtualHost _default_:443> ... SSLEngine on SSLCertificateFile /etc/ssl/ca/private/server.crt SSLCertificateKeyFile /etc/ssl/ca/private/server.key SSLVerifyClient require SSLVerifyDepth 2 SSLCACertificatePath /etc/ssl/ca/private SSLCACertificateFile /etc/ssl/ca/private/ca.crt <Location /> SSLRequireSSL SSLVerifyClient require SSLVerifyDepth 2 </Location> <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> ... </VirtualHost> </IfModule> I've install the p12 file into Chrome, but when I go to visit https://localhost, I get the following errors Chrome: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. Apache: Certificate Verification: Error (18): self signed certificate If I had to guess, one of my directives is not setup right to load and verify the p12 w/ my self created CA. But I can't for the life of me figure out what it is. Would anyone have more experience here who could point me in the right direction?

  Read the article

< Previous Page | 608 609 610 611 612 613 614 615 616 617 618 619  | Next Page >