Search Results

Search found 17579 results on 704 pages for 'mercurial build'.

Page 613/704 | < Previous Page | 609 610 611 612 613 614 615 616 617 618 619 620  | Next Page >

  • iptables : how to allow incoming ftp traffic?

    - by logansama
    Hi, Still fighting my way through the jungle that is called iptables. I have managed to allow FTP access outside of our LAN: both these would work. NOTE: eth0 is the LAN interface and eth1 is the WAN interface. iptables -t filter -A FORWARD -i eth0 -p tcp --dport 20:21 -j ACCEPT or iptables -A FORWARD -i eth0 -o eth1 -p tcp --sport 20:21 --dport 1024:65535 -j ACCEPT But when i connect to a external FTP server i manage to log in and all is fine until it wishes to List the directory content. Then nothing happens as the data is blocked, due to the fact that i do not have a rule set up to allow it! (my last rule on the FORWARD chain is to block all traffic) I have tried a gazillion rules (many of which i did not understand) to try and allow the FTP traffic back through my server. One such rule for example was: iptables -A FORWARD -i eth1 -o eth0 -p tcp --sport 20:21 --dport 1024:65535 -j ACCEPT But i cannot get the List to work. It just times out after a while. Would anyone perhaps know how to build a rule which would allow FTP to List / allow such traffic back? Or have a link to sources i could work through? Thank you,

    Read the article

  • Is there a IDE/compiler PC benchmark I can use to compare my PCs performance?

    - by RickL
    I'm looking for a benchmark (and results on other PCs) which would give me an idea of the development performance gain I could get by upgrading my PC, also the benchmark could be used to justify the upgrade to my boss. I use Visual Studio 2008 for my development, so I'd like to get an idea of by what factor the build times would be improved, and also it would be good if the benchmark could incorporate IDE performance (i.e. when editing, using intellisense, opening code files etc) into its result. I currently have an AMD 3800x2, with 2GB RAM on Vista 32. For example, I'd like to know what kind of performance gain I'd see in Visual Studio 2008 with a Q6600, 4GB RAM on Vista 64. And also with other processors, and other RAM sizes... also see whether hard disk performance is a big factor. EDIT: I mentioned Vista 64 because I'm aware that Vista 32 can only use 3GB RAM maximum. So I'd presume that wanting to use more RAM would require Vista 64, but perhaps it could still be slower overall there is a large overhead in using the 32 bit VS 2008 on 64 bit OS.

    Read the article

  • Thread-safety of read-only memory access

    - by Edmund
    I've implemented the Barnes-Hut gravity algorithm in C as follows: Build a tree of clustered stars. For each star, traverse the tree and apply the gravitational forces from each applicable node. Update the star velocities and positions. Stage 2 is the most expensive stage, and so is implemented in parallel by dividing the set of stars. E.g. with 1000 stars and 2 threads, I have one thread processing the first 500 stars and the second thread processing the second 500. In practice this works: it speeds the computation by about 30% with two threads on a two-core machine, compared to the non-threaded version. Additionally, it yields the same numerical results as the original non-threaded version. My concern is that the two threads are accessing the same resource (namely, the tree) simultaneously. I have not added any synchronisation to the thread workers, so it's likely they will attempt to read from the same location at some point. Although access to the tree is strictly read-only I am not 100% sure it's safe. It has worked when I've tested it but I know this is no guarantee of correctness! Questions Do I need to make a private copy of the tree for each thread? Even if it is safe, are there performance problems of accessing the same memory from multiple threads?

    Read the article

  • How to Map Two Tables To One Class in Fluent NHibernate

    - by Richard Nagle
    I am having a problem with fluent nhiberbate mapping two tables to one class. I have the following database schema: TABLE dbo.LocationName ( LocationId INT PRIMARY KEY, LanguageId INT PRIMARY KEY, Name VARCHAR(200) ) TABLE dbo.Language ( LanguageId INT PRIMARY KEY, Locale CHAR(5) ) And want to build the following class definition: public class LocationName { public virtual int LocationId { get; private set; } public virtual int LanguageId { get; private set; } public virtual string Name { get; set; } public virtual string Locale { get; set; } } Here is my mapping class: public LocalisedNameMap() { WithTable("LocationName"); UseCompositeId() .WithKeyProperty(x => x.LanguageId) .WithKeyProperty(x => x.LocationId); Map(x => x.Name); WithTable("Language", lang => { lang.WithKeyColumn("LanguageId"); lang.Map(x => x.Locale); }); } The problem is with the mapping of the Locale field being from another table, and in particular that the keys between those tables don't match. Whenever I run the application with this mapping I get the following error on startup: Foreign key (FK7FC009CCEEA10EEE:Language [LanguageId])) must have same number of columns as the referenced primary key (LocationName [LanguageId, LocationId]) How do I tell nHibernate to map from LocationName to Language using only the LanguageId field?

    Read the article

  • Why is this Javascript that writes out a Google Ad not displaying properly on the iPhone?

    - by Dave M G
    I have this Javacsript code that checks to see if there is a DIV named "google-ad", and if there is, it writes in a the necessary code to display the Google Ad. This works great in browsers like Firefox, Chrome, Safari on Mac, and Android. However, when I bundle this code with Adobe's Phonegap Build, and deploy it to iPhones, it behaves strangely. It launches a browser window displaying just the Google Ad alone. In order to keep using my app, every time I change a page and a new Google Ad is loaded, I have to close the browser window to get back to the app. Why is this code launching browser windows outside of my Phonegap app on iPhone? if(document.getElementById("google-ad") && document.getElementById("google-ad") !== null && document.getElementById("google-ad") !== "undefined") { if(userStatus.status == 0) { document.getElementById("centre").style.padding = "137px 0 12px 0"; document.getElementById("header-container").style.margin = "-138px 0 0 0"; document.getElementById("header-container").style.height = "132px"; document.getElementById("header-username").style.top = "52px"; document.getElementById("google-ad").style.height = "50px"; document.getElementById("google-ad").style.width = "320px"; document.getElementById("google-ad").style.backgroundColor = "#f0ebff"; document.getElementById("google-ad").style.display = "block"; window["google_ad_client"] = 'ca-pub-0000000000000000'; window["google_ad_slot"] = "00000000"; window["google_ad_width"] = 320; window["google_ad_height"] = 50; window.adcontainer = document.getElementById('google-ad'); window.adhtml = ''; function mywrite(html) { adhtml += html; adcontainer.innerHTML = adhtml; }; document.write_ = document.write; document.write = mywrite; script = document.createElement('script'); script.src='http://pagead2.googlesyndication.com/pagead/show_ads.js'; script.type='text/javascript'; document.body.appendChild(script); }

    Read the article

  • Codeigniter return config file as array with autoload enabled

    - by Fverswijver
    So I'm using CodeIgniter to build a website and I've made it so that all my specific settings are stored in a config file that's automatically loaded. I've also built a page that loads the settings file, makes a nice little table and allows me to edit everything from that page, afterwards it saves the entire page again (I know I could've done the same with a database but I want to try it this way). My problem is that I can't seem to use this bit when autoloading of my config file is enabled, but when I disable autoloading I can't seem to manually load it, it never finds my variables. So what I'm doing here is just taking all values from the config file and putting them in a single array so I can pass this array onto my settings administration page (edit/show all settings). $this->config->load('site_settings', TRUE); $data['settings'] = $this->config->item('site_settings'); ... $this->load->view('template', $data); config/site_settings.php <?php if ( ! defined('BASEPATH')) exit('No direct script access allowed'); $config['header_img'] = './img/header/'; $config['copyright_text'] = 'Copyright Instituto Kabu'; $config['copyright_font'] = './system/fonts/motoroil.ttf'; $config['copyright_font_color'] = 'ffffff'; $config['copyright_font_size'] = '32';

    Read the article

  • Importing Excel spreadsheet data into existing Access DB

    - by Keeb13r
    I've designed an Access 2003 DB with 3 tables: APPLICATIONS, SERVERS, and INSTALLATIONS. Records in the APPLICATIONS and SERVERS tables are uniquely identified by a synthetic primary key (in Access, an "auto number"). The INSTALLATIONS table is essentially a mapping table between APPLICATIONS and SERVERS: it's a list of records of which applications are installed on which servers. A record in the INSTALLATIONS table is also identified by a synthetic primary key, and it consists of an APPLICATION_ID and SERVER_ID for the records in their respective tables. I have an Excel 2003 spreadsheet I would like to import into this database, but it's proving difficult. The spreadsheet is made up of several tabs/worksheets, each one representing a server with its own listing of installed applications. I'm not sure how to proceed with an import - the "Get External Data -- Import" feature in Access has an import "In an Existing Table" option, but it's greyed out. I'm also unsure how I build the relationships between applications and servers for importing records into the INSTALLATIONS table. I had previously fooled around with adding some security to the Access DB file. I think I removed everything but perhaps I didn't and that's causing the problem? Some sample data from the Excel spreadsheet: SERVER101 * Adobe Reader 9 * BMC Remedy User 7.0 * HostExplorer 2008 * Microsoft Office 2003 * Microsoft Office 2007 * Notepad++ SERVER102 * Adobe Reader 9 * DameWare Mini Remote Control * Microsoft Office 2003 * Microsoft .NET Framework 3.5 SP1 * Oracle 9.2 SERVER103 * AWDView * EXTRA! Personal Client 32-bit * Microsoft Office 2003 * Microsoft .NET Framework 3.5 SP1 * Snagit 9.1 * WinZip 12.1 The Access DB design is very simple: APPLICATION * APPLICATION_ID (autonumber) * APPLICATION_NAME (varchar) SERVER * SERVER_ID (autonumber) * SERVER_NAME (varchar) INSTALLATION * INSTALLATION_ID (autonumber) * APPLICATION_ID (number) * SERVER_ID (number)

    Read the article

  • ecommerce platform or from scratch? customer specific catalogs and purchase orders

    - by rafi
    I have a possible freelance job in front of me for a distributor who wants product ordering set up but the orders are all P.O.s basically - no actual credit card or paypal transaction. The customer is simply billed and the order archived. Customers will need to login to this site and each customer will have their own custom catalog of a few dozen products which have been setup via a control panel this distributor uses. So there will be a master catalog of over 1,000 products (perhaps browsable but not to be ordered from on the site) but each customer will only be able to order from the products specified for their accounts. I know I can build this from scratch but I figured it's worth looking into what ecommerce platforms would get me a nice head start. Obviously shopping cart, order history, catalog management are concepts that I can reuse but are any of the ecommerce systems out there also capable of handling custom catalogs (maybe as multi-stores?) or transactions billed to accounts without credit card? The more I could reuse the better. I've messed with OSCommerce (way back) and a little Zen Cart more recently. I've also worked on a number of totally custom e-commerce sites. But my knowledge of the open source e-commerce tools is pretty limited and I'm trying to keep the effort as simple as I possibly can on this. I'm pretty flexible on the language of the platform by the way. Thanks in advance.

    Read the article

  • I can learn either C or Java, which one should I choose first? Should I take them concurrently?

    - by GR1000
    I realize this is a subject of hot debate, but I'm interested in opinions that relate to my specific situation. I want to learn the basics and fundamentals of programming, so I'm already taking a college course in general programming concepts. It isn't covering a specific language, but it's giving me a solid foundation that I can build upon when I move on to a class that teaches a specific language. My two options for a specific language are Java and C because those are the two languages taught at the college I want to take classes from. What I want to do is learn a complex language so that I can apply that knowledge to languages that I use, or will eventually use, in my current job building web pages: XHTML, CSS, JavaScript, PHP, XML, ActionScript. I'm not necessariy interested in becoming a Java developer or a C developer in the immediate future, but I do have aspirations of developing web applications and iPod/iPhone applications. So, basically, I'm looking for answers to these questions and the reasoning behind them: Do I take the introductory course in Java first, and then take the intro course in C, or Do I take C first and then take Java? Is there any reason not to take them concurrently? Should I skip C altogether as Java covers everything I need to know? EDIT: Thanks everyone for your thoughtful and insightful responses.

    Read the article

  • GWT in its web-mode throws StatusCodeException but in its hosted-mode , it's working perfect

    - by broshni
    Hi to all, I am new to this forum. Actually I have an issue here regarding my application which is hibernate+struts based application. Recently we have decided to integrate GWT into our application. We are using gwt 1.5.3 build. We have set up everything exactly as we find in documentation and various blogs. Yeah I am now in a very nervy state as gwt in its web- mode is treating me in a very embarassing manner. But it is compiling and working perfectly fine in its hosted-mode and everything works fine as we expected and designed. When I try to integrate GWT with our application i.e. running in tomcat (http://localhost:8080/myapps/example.do? reqCode=takeMeToGWT&userId=12&templateId=10). The gwt page is loaded partially and in the midst it throws an exception i.e. StatusCodeException. This doesn't happen when I run the gwt application in hosted-mode ( http://localhost:8888/com.myapp.gwt.MyApp/Home.html ) . I am using Intellij Idea 8, struts 1.3 ,hibernate 3 and tomcat 5.5 . Expecting your responses at the earliest possible time. Thanking you B Roshnikanta Sharma [email protected]

    Read the article

  • Java RMI Proxy issue

    - by Antony Lewis
    i am getting this error : java.lang.ClassCastException: $Proxy0 cannot be cast to rmi.engine.Call at Main.main(Main.java:39) my abstract and call class both extend remote. call: public class Call extends UnicastRemoteObject implements rmi.engine.Abstract { public Call() throws Exception { super(Store.PORT, new RClient(), new RServer()); } public String getHello() { System.out.println("CONN"); return "HEY"; } } abstract: public interface Abstract extends Remote { String getHello() throws RemoteException; } this is my main: public static void main(String[] args) { if (args.length == 0) { try { System.out.println("We are slave "); InetAddress ip = InetAddress.getLocalHost(); Registry rr = LocateRegistry.getRegistry(ip.getHostAddress(), Store.PORT, new RClient()); Object ss = rr.lookup("FILLER"); System.out.println(ss.getClass().getCanonicalName()); System.out.println(((Call)ss).getHello()); } catch (Exception e) { e.printStackTrace(); } } else { if (args[0].equals("master")) { // Start Master try { RMIServer.start(); } catch (Exception e) { e.printStackTrace(); } } Netbeans says the problem is on line 39 which is System.out.println(((Call)ss).getHello()); the output looks like this: run: We are slave Connecting 10.0.0.212:5225 $Proxy0 java.lang.ClassCastException: $Proxy0 cannot be cast to rmi.engine.Call at Main.main(Main.java:39) BUILD SUCCESSFUL (total time: 1 second) i am running a master in cmd listening on port 5225.

    Read the article

  • How do I keep users from spoofing data through a form?

    - by Jonathan
    I have a site which has been running for some time now that uses a great deal of user input to build the site. Naturally there are dozens of forms on the site. When building the site, I often used hidden form fields to pass data back to the server so that I know which record to update. an example might be: <input type="hidden" name="id" value="132" /> <input type="text" name="total_price" value="15.02" /> When the form is submitted, these values get passed to the server and I update the records based on the data passed (i.e. the price of record 132 would get changed to 15.02). I recently found out that you can change the attributes and values via something as simple as firebug. So...I open firebug and change the id value to "155" and the price value to "0.00" and then submit the form. Viola! I view product number 155 on the site and it now says that it's $0.00. This concerns me. How can I know which record to update without either a query string (easily modified) or a hidden input element passing the id to the server? And if there's no better way (I've seen literally thousands of websites that pass the data this way), then how would I make it so that if a user changes these values, the data on the server side is not executed (or something similar to solve the issue)? I've thought about encrypting the id and then decrypting it on the other side, but that still doesn't protect me from someone changing it and just happening to get something that matches another id in the database. I've also thought about cookies, but I've heard that those can be manipulated as well. Any ideas? This seems like a HUGE security risk to me.

    Read the article

  • Can I get the item type from a BindingSource?

    - by Preston
    I would like to get the Type of item that a BindingSource is hooked up to or configured for. The BindingSource.DataSource property can be set to an object, list, or type. If it is a Type, it obviously does not have an bound item yet, but I would still like to get the Type. For a List, I need the item Type, not the list type. There is a method BindingSource.GetItemProperties, that accomplishes most of what I need. It gets the PropertyDescriptors for the Type, list item, or object specified by the DataSource and DataMember. The reason I ask, is that I have some components that I would like to re-use, but they are currently setup to work off of an item Type. The Type is mainly used to get PropertyInfos and then build a UI, but PropertyInfo and PropertyDescriptor is not exactly the same, so it is not immediately apparent that they can be reworked to use a PropertyDescriptor collection instead. Then there is cascading refactoring of everything already using these components and that adds up to a lot of work that I would rather not do. I've looked through the API docs for for a good way to do this, but so far I have not had any luck. Am I missing something or is this just something I can not or should not be doing?

    Read the article

  • gevent urllib is slow

    - by djay
    I've created a set of demos of a TCP server however my gevent examples are noticely slower. I'm sure must be how I compiled gevent but can't work out the problem. I'm using OSX leopard using fink compiled python 2.6 and 2.7. I've tried both the stable gevent and gevent 1.0b1 and it acts the same. The echo takes 5 seconds to respond, where the other examples take <1sec. If I remove the urllib call then the problem goes away. I put all the code in https://github.com/djay/geventechodemo To run the examples I'm using zc.buildout so to build $ python2.7 bootstrap.py $ bin/buildout To run the gevent example: $ bin/py geventecho3.py & [1] 80790 waiting for connection... $ telnet localhost 8080 Trying 127.0.0.1... ...connected from: ('127.0.0.1', 56588) Connected to localhost. Escape character is '^]'. hello echo: avast This will take 3-4 seconds to respond on my system. However the twisted example $ bin/py threadecho2.py or the twisted example $ bin/py twistedecho2.py Is less than 1s. Any idea what I'm doing wrong?

    Read the article

  • ajax checkbox filter

    - by user1018298
    I need some help with a checkbox filter I am working in. I have four groups of checkboxes (type, vehicle, availability, price) and I would like to filter the content on the page based on the user's input. I can get the filter working OK but I am having issues with the groups. I can only seem to match one checkbox from each group rather than all checkboxes from each group. For example, a visitor can select 1 option in group 1, all options in group 2, 1 option in group three and 1 option in group 4. I am using ajax to build an SLQ query to return the correct filtered results from my database. here is my code: $('div.filters').delegate('input:checkbox', 'change', function() { var type = $('input.exp_type:checked').map(function () { return $(this).attr('value'); }).get().join(','); var vehicle = $('input.vehicle_type:checked').map(function () { return $(this).attr('value'); }).get().join(','); var avail = $('input.availability:checked').map(function () { return $(this).attr('value'); }).get().join(','); var price = $('input.price:checked').map(function () { return $(this).attr('value'); }).get().join(','); //alert($options); $.ajax({ type:"POST", url:"filtervouchers.php", data:"type="+type+"&vehicle="+vehicle+"&avail="+avail+"&price="+price, success:function(data){ $('.results').html(data); } });//end ajax }) and the php code: $type = mysql_real_escape_string($_POST['type']); $vehicles = mysql_real_escape_string($_POST['vehicle']); $avail = mysql_real_escape_string($_POST['avail']); $price = mysql_real_escape_string($_POST['price']); if ($type != '') { $sql2 = " AND exp_type IN ($type)"; } if ($vehicles != '') { $sql3 = " AND vehicle_type LIKE '%$vehicles%'"; } if ($avail != '') { $sql4 = " AND availability LIKE '%,' $avail% ','"; } if ($price != '') { $sql5 = " AND price_band IN ($price)"; } Can this be done using jquery?

    Read the article

  • Using custom detectors with FindBugs Maven plugin

    - by Lóránt Pintér
    I have a nice JAR of some custom FindBugs detectors I'd like to use with the FindBugs Maven plugin. There is a way to do this with the plugin via the <pluginList> configuration parameter, but that only accepts local files, URLs, or resources. The only way I found for doing so is to somehow copy my JAR to a local file (maybe via the Dependency plugin) and then configure the FindBugs plugin something like this: <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>findbugs-maven-plugin</artifactId> <version>2.3.1</version> <configuration> <pluginList>${project.build.directory}/my-detectors.jar</pluginList> </configuration> </plugin> But this is not very flexible. Is there a way to use Maven's dependency management features together with FindBugs' plugins? I'd like to use something like this: <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>findbugs-maven-plugin</artifactId> <dependencies> <dependency> <groupId>com.lptr.findbugs</groupId> <artifactId>my-detectors</artifactId> <version>1.0</version> </dependency> </dependencies> </plugin> ...but this simply overrides the core FindBugs detectors.

    Read the article

  • Emulating Test::More::done_testing - what is the most idiomatic way?

    - by DVK
    I have to build unit tests for in environment with a very old version of Test::More (perl5.8 with $Test::More::VERSION being '0.80') which predates the addition of done_testing(). Upgrading to newer Test::More is out of the question for practical reasons. And I am trying to avoid using no_tests - it's generally a bad idea not catching when your unit test dies prematurely. What is the most idiomatic way of running a configurable amount of tests, assuming no no_tests or done_testing() is used? Details: My unit tests usually take the form of: use Test::More; my @test_set = ( [ "Test #1", $param1, $param2, ... ] ,[ "Test #1", $param1, $param2, ... ] # ,... ); foreach my $test (@test_set) { run_test($test); } sub run_test { # $expected_tests += count_tests($test); ok(test1($test)) || diag("Test1 failed"); # ... } The standard approach of use Test::More tests => 23; or BEGIN {plan tests => 23} does not work since both are obviously executed before @tests is known. My current approach involves making @tests global and defining it in the BEGIN {} block as follows: use Test::More; BEGIN { our @test_set = (); # Same set of tests as above my $expected_tests = 0; foreach my $test (@tests) { my $expected_tests += count_tests($test); } plan tests = $expected_tests; } our @test_set; # Must do!!! Since first "our" was in BEGIN's scope :( foreach my $test (@test_set) { run_test($test); } # Same sub run_test {} # Same I feel this can be done more idiomatically but not certain how to improve. Chief among the smells is the duplicate our @test_test declarations - in BEGIN{} and after it.

    Read the article

  • How to handle building and parsing HTTP URL's / URI's / paths in Perl

    - by Robert S. Barnes
    I have a wget like script which downloads a page and then retrieves all the files linked in img tags on that page. Given the URL of the original page and the the link extracted from the img tag in that page I need to build the URL for the image file I want to retrieve. Currently I use a function I wrote: sub build_url { my ( $base, $path ) = @_; # if the path is absolute just prepend the domain to it if ($path =~ /^\//) { ($base) = $base =~ /^(?:http:\/\/)?(\w+(?:\.\w+)+)/; return "$base$path"; } my @base = split '/', $base; my @path = split '/', $path; # remove a trailing filename pop @base if $base =~ /[[:alnum:]]+\/[\w\d]+\.[\w]+$/; # check for relative paths my $relcount = $path =~ /(\.\.\/)/g; while ( $relcount-- ) { pop @base; shift @path; } return join '/', @base, @path; } The thing is, I'm surely not the first person solving this problem, and in fact it's such a general problem that I assume there must be some better, more standard way of dealing with it, using either a core module or something from CPAN - although via a core module is preferable. I was thinking about File::Spec but wasn't sure if it has all the functionality I would need.

    Read the article

  • Visual Studio C++ Solution in Maven2

    - by graham.reeds
    A new project is coming up that will require interaction between Java and C++. It's been decided that the project will be built via Maven2. Unfortunately I don't know anything about Maven and the Java guys don't know anything about C++. They have their build chain all set up with various reports being emitted for each part related to CheckStyle, Findbugs, Corbortura(?) etc. and they want the same to be done with the C++ side. Currently we have 4 apps that need building: 2 services, a tray app and a simple dialog based application. I've been told I need to have a pom for each and configure each to output to a target directory, have the tool chain produce the reports - the most particular being the code coverage which the client wants 100%. I have sourced the tools - Bullseye and QA-C++ and requested eval copies - but I am dismayed to find there is very little information on C++ & Maven, and what little there is seems to be horror stories. Does anyone on SO have a good story about it (or have link to blog post)? Is there a simple explanation anywhere for configuring a Visual Studio solution (preferably C++) to be Mavenized? I am expecting pain but I am getting increasingly wary of this venture - but unfortunately the project manager is Java side and seems hell-bent on Mavenizing it.

    Read the article

  • QTCreator 3.1 design tab not working

    - by user3112140
    I’m currently using QtCreator 3.1 and qt-everywhere-opensource-src-5.2.1 on Ubuntu 12.04 My project is correctly working, i.e., i can build it and run without any trouble. But i’ve got some problems with the design tab inside Qtcreator. First, on all qml file (even with example projects), i have an error message “Using Qt Quick code model instead of Qt Quick2 (M324) (4:1)” and i can’t use the design editor. Second, on qml files with other import than QtQuick 2.2 (for me QtQml.Models 2.1 and QtQuick.Controls 1.1), the import is underlined in red with the error message “QML module not found”. I’ve tried to edit the .pro file by adding QML2_IMPORT_PATH=/home/user/qt-everywhere-opensource-src-5.2.1/qtquickcontrols/qml/QtQuick/Controls/ (also tried with QML_IMPORT_PATH), it doesn’t work. Then, I tried to add it to my path in a terminal using “export QML_IMPORT_PATH=/home/user/qt-everywhere-opensource-src-5.2.1/qtquickcontrols/qml/QtQuick/Controls/” and this time, in the error message, i can see the added path in the error message, but it still doesn’t work. Anyone has an idea to help me ? Thx !

    Read the article

  • Boost multi_index_container crash in release mode

    - by Zan Lynx
    I have a program that I just changed to using a boost::multi_index_container collection. After I did that and tested my code in debug mode, I was feeling pretty good about myself. However, then I compiled a release build with NDEBUG set, and the code crashed. Not immediately, but sometimes in single-threaded tests and often in multi-threaded tests. The segmentation faults happen deep inside boost insert and rotate functions related to the index updates and they are happening because a node has NULL left and right pointers. My code looks a bit like this: struct Implementation { typedef std::pair<uint32_t, uint32_t> update_pair_type; struct watch {}; struct update {}; typedef boost::multi_index_container< update_pair_type, boost::multi_index::indexed_by< boost::multi_index::ordered_unique< boost::multi_index::tag<watch>, boost::multi_index::member<update_pair_type, uint32_t, &update_pair_type::first> >, boost::multi_index::ordered_non_unique< boost::multi_index::tag<update>, boost::multi_index::member<update_pair_type, uint32_t, &update_pair_type::second> > > > update_map_type; typedef std::vector< update_pair_type > update_list_type; update_map_type update_map; update_map_type::iterator update_hint; void register_update(uint32_t watch, uint32_t update); void do_updates(uint32_t start, uint32_t end); }; void Implementation::register_update(uint32_t watch, uint32_t update) { update_pair_type new_pair( watch_offset, update_offset ); update_hint = update_map.insert(update_hint, new_pair); if( update_hint->second != update_offset ) { bool replaced _unused_ = update_map.replace(update_hint, new_pair); assert(replaced); } }

    Read the article

  • jquery animated buttons that just wont behave

    - by TJ Sherrill
    Ok I have a inline list of buttons. <ul id="nav"> <li class="home"><a href="#">Menu Item</a></li> <li class="contact"><a href="#">Menu Item</a></li> <li class="about"><a href="#">Menu Item</a></li> </ul> .home{ position:absolute; bottom:0; background-image:url(../img/menu/single_line.png); background-repeat:no-repeat; height:34px; width:134px; } .home_hover{ position:absolute; bottom:0; background-image:url(../img/menu/single_line_over.png); background-repeat:no-repeat; height:70px; width:134px; } $(document).ready(function(){ $("#nav .home").mouseover(function(){ $(this).toggleClass("home_hover").slideToggle("slow"); return false; }).mouseout(function(){ $(this).toggleClass("home_hover").slideToggle("slow"); return false; }); }); Each menu item has a background image, and then when its hovered the background image is replaced by a taller image. Ultimately I am trying to build a simple menu where on mouseover the menu item appears to slide up. But in reality Jquery can animate the toggleClass with slideToggle. The problem is that this current code doesn't behave right. It jumps up and down, because the text is moving. I am pretty new to Jquery so any help is greatly appreciated. I also loaded this up at http://gasworks.ravennainteractive.com/result/ thanks

    Read the article

  • Is it possible in Perl to require a subroutine call is made?

    - by MitchelWB
    I don't know enough about Perl to even know what I'm asking for exactly, but I'm writing a series of subroutines to be available for many individual scripts that all process different incoming flat files. The process is far from perfect, but it's what I've got to deal with and I'm trying to build myself a small library of subs that make it easier for me to manage it all. Each script handles a different incoming flat file with it's own formatting, sorting, grouping and outputting requirements. One common aspect is that we have small text files that house counters that are used to name the output files so that we have no duplicate file names. Because the processing of the data is different for each file, I need to open the file to get my counter value, because this is a common operation, I'd like to put it in a sub to retrieve the counter. But then need to write specific code to process the data. And would like a second sub that allows me to update the counter with the counter once I've processed the data. Is there a way to make the second sub call a requirement if the first one is called? Ideally if it could even be an error that would prevent the script from running at all much like a syntax error. EDIT: Here is a little [ugly and simplified] psuedo-code to give a better feel for what the current process is: require "importLibrary.plx"; #open data source file open DataIn, $filename; #call getCounterInfo from importLibrary.plx to get the counter value from counter file $counter = &getCounterInfo($counterFileName); while (<DataIn>) { #Process data based on unique formatting and requirements #output to task files based on requirements and name files using the $counter #increment $counter } #update counter file with new value of $counter &updateCounterInfo($counter);

    Read the article

  • my dialog box did not show up whene i compile it using sdk 7.1,

    - by zirek
    hello and welcom everyone .. i'd like to build a win32 application using sdk 7.1, i create the dialog box using visual c++ 2012 resource editor, i copy resource.rc and resource.h to my folder and i write this simple main.cpp file: #include <windowsx.h> #include <Windows.h> #include <tchar.h> #include "resource.h" #define my_PROCESS_MESSAGE(hWnd, message, fn) \ case(message): \ return( \ SetDlgMsgResult(hWnd, uMsg, \ HANDLE_##message((hWnd), (wParam), (lParam), (fn)) )) \ LRESULT CALLBACK DlgProc(HWND, UINT, WPARAM, LPARAM); BOOL Cls_OnInitDialog(HWND hwnd, HWND hwndFocus, LPARAM lParam); void Cls_OnCommand(HWND hwnd, int id, HWND hwndCtl, UINT codeNotify); int WINAPI _tWinMain( HINSTANCE hInstance, HINSTANCE, LPTSTR, int iCmdLine ) { DialogBoxParam( hInstance, MAKEINTRESOURCE(IDD_INJECTOR), NULL, (DLGPROC) DlgProc, NULL ); return FALSE; } LRESULT CALLBACK DlgProc( HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam ) { switch (uMsg) { my_PROCESS_MESSAGE(hwnd, WM_INITDIALOG, Cls_OnInitDialog); my_PROCESS_MESSAGE(hwnd, WM_COMMAND, Cls_OnCommand); default: break; } return DefWindowProc(hwnd, uMsg, wParam, lParam); } BOOL Cls_OnInitDialog(HWND hwnd, HWND hwndFocus, LPARAM lParam) { return TRUE; } void Cls_OnCommand(HWND hwnd, int id, HWND hwndCtl, UINT codeNotify) { switch(id) { case IDCANCEL: EndDialog(hwnd, id); break; default: break; } } then i use the following command line to compile my code, wich i found on this forum cl main.cpp /link /SUBSYSTEM:WINDOWS user32.lib my problem is that my dialog box did not show up, and when i use procexp, to see what happen, i found that that my application is created then closed in the same time, and what make me wondering is that its working fine on visual c++ 2012. my sdk 7.1, installed correctly, i testing it against a basic window without any resource file any ideas, ill be really thankful Best, Zirek

    Read the article

  • Splitting a set of object into several subsets of 'similar' objects

    - by doublep
    Suppose I have a set of objects, S. There is an algorithm f that, given a set S builds certain data structure D on it: f(S) = D. If S is large and/or contains vastly different objects, D becomes large, to the point of being unusable (i.e. not fitting in allotted memory). To overcome this, I split S into several non-intersecting subsets: S = S1 + S2 + ... + Sn and build Di for each subset. Using n structures is less efficient than using one, but at least this way I can fit into memory constraints. Since size of f(S) grows faster than S itself, combined size of Di is much less than size of D. However, it is still desirable to reduce n, i.e. the number of subsets; or reduce the combined size of Di. For this, I need to split S in such a way that each Si contains "similar" objects, because then f will produce a smaller output structure if input objects are "similar enough" to each other. The problems is that while "similarity" of objects in S and size of f(S) do correlate, there is no way to compute the latter other than just evaluating f(S), and f is not quite fast. Algorithm I have currently is to iteratively add each next object from S into one of Si, so that this results in the least possible (at this stage) increase in combined Di size: for x in S: i = such i that size(f(Si + {x})) - size(f(Si)) is min Si = Si + {x} This gives practically useful results, but certainly pretty far from optimum (i.e. the minimal possible combined size). Also, this is slow. To speed up somewhat, I compute size(f(Si + {x})) - size(f(Si)) only for those i where x is "similar enough" to objects already in Si. Is there any standard approach to such kinds of problems? I know of branch and bounds algorithm family, but it cannot be applied here because it would be prohibitively slow. My guess is that it is simply not possible to compute optimal distribution of S into Si in reasonable time. But is there some common iteratively improving algorithm?

    Read the article

< Previous Page | 609 610 611 612 613 614 615 616 617 618 619 620  | Next Page >