Search Results

Search found 45987 results on 1840 pages for 'copy files'.

Page 614/1840 | < Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >

• IDE compatability with SATA image

  - by Ormis

  We had an old CNC machine's hard-drive fail recently. The hard-drive is an old 1275MB IDE (Seagate) and there were defiantly bad sectors on it. I was able to image the contents of the drive onto a drive in my computer before it became completely unusable (I used DD, replacing all bad sectors w/ 0s). After running a couple chdsks, the SATA drive will boot off of the image. This is great, but there's one problem. The CNC machine old and requires IDE, I've attempted to copy the currently booting image off of the SATA drive and onto IDE drives numerous times in numerous ways and every time I do so the machines return that a boot device cannot be found. Some other information: The file system is fat32, running windows 98 The SATA drive is an 80gb drive I have tried copying the image to three 20gb and two 80gb IDE drives I have checked the jumper on the back of the IDE drives when using them If anyone has any ideas, questions, suggestions, etc. please let me know. P.S. I would just put a fresh install of win98 on the machine if i had the installation media (so that's out of the question). And if it comes to it, this is my last week working here, so I'll leave that to my co-worker. EDIT: Also, I have tried using Clonezilla as well as straight up DD to copy the image to the IDE drives.

  Read the article

• How to Upgrade PHP 5.2 to 5.3 on Windows Plesk Panel 8.2

  - by Jagat Sheth

  I need to upgrade my server PHP version becasue of Wordpress New version not support PHP 5.2. On My server windows 2003 stansard edition x64 with SP1 installed, IIS 6.0, MySQL 4.1, Plesk Panel 8.2. I have follow listed steps on plesk KB. http://kb.parallels.com/6670 How to update PHP 5 on a Windows server with Parallels Plesk Control Panel 8.x and 9.x installed. In order to upgrade PHP 5 to the necessary version (other than shipped with Parallels Plesk), please perform the following steps: Stop Plesk services (‘Control Panel’ and all that are included in the ‘Plesk Run-Time’ section) Rename folder %plesk_dir%\Additional\PleskPHP5 to the orig_PleskPHP5 Create a new folder %plesk_dir%\Additional\PleskPHP5 Download necessary version of PHP, unzip its content, and copy it to the newly created folder PleskPHP5 Copy the file php.ini from the old folder orig_PleskPHP5 to the new one Make sure the permissions are inherited Start Plesk services Click the "Refresh" button in the Components Management section in Parallels Plesk Panel and check if you can see the new PHP version there After follow steps when I open a PHP info it shows me specified module could not be found. If anybody know solution Kindly help me is highly priority. I am very thankful if any one help me to solve this ASAP. Thanks and regards, Jagat Sheth

  Read the article

• Quickly close all Word and Excel instances?

  - by dyenatha

  Suppose I open 10 Word files and 10 Excel files and make no changes, how do I quickly taskkill all at once? Because I must repeat several attempts to replicate race, I'm hoping for a command-line solution. I'm willing to try PowerShell and cygwin (1.5) if necessary. The OS is Windows XP SP3 with current patches (still IE7). I tried "taskkill /pid 1 /pid 2 /t" where 1 is PID of EXCEL.EXE and 2 is PID of WINWORD.EXE, but it closed only 1 window of each program. I'm trying to replicate a race where an add-in for Microsoft Office 2007 fails to exclusive-lock one of its own files, which caused the 2nd Office program to stop exiting with a warning: System.IO.IOException: The process cannot access the file 'C:\Documents and Settings\me\Application Data\ExpensiveProduct\Add-InForMicrosoftOffice\4.2\egcred' because it is being used by another process. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding) at System.IO.File.WriteAllText(String path, String contents, Encoding encoding) at ExpensiveProduct.EG.DataAccess.Credentials.CredentialManager.SaveUserTable() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.WordAddin.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.OfficeAddinBase.OnHostShutdown() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Unload(ext_DisconnectMode mode)

  Read the article

• optimize mod_rewrite in htaccess

  - by clarkk

  I got some mod_rewrite conditions in a .htaccess file which I have extended from time to time.. But I don't think its very well written (I'm still quite new to mod_rewrite) Some times requests end up in infinite loops And just now I added SSL to the file.. When requesting https:// I get a 404 error The requested URL /_secure/_secure/ was not found on this server. Somehow it adds an extra _secure to the path? .htacces # set language RewriteCond %{HTTP_HOST} ^www\. [NC] RewriteCond %{REQUEST_URI} ^/(da|en)/(.*)(\?%{QUERY_STRING})?$ [NC] RewriteRule ^(.*)$ /%2?%{QUERY_STRING}&set_lang=%1 [L] # put 'www' as subdomain if none is given RewriteCond %{HTTP_HOST} ^([^\.]+\.[^\.]+)$ [NC] RewriteRule ^(.*)$ http://www.%1/$1 [L,R=301] # rewrite subdomain RewriteCond %{HTTP_HOST} ^(admin|files)\.[^\.]+\.[^\.]+$ [NC] RewriteCond %{REQUEST_URI} !^/_(admin|files)/ [NC] RewriteRule ^(.*)$ /_%1/$1 [L] # redirect to subdomain RewriteCond %{HTTP_HOST} ^www\.([^\.]+\.[^\.]+)$ [NC] RewriteRule ^_([^/]+)/ http://$1.%1/ [L,R=301] # start SSL on 'secure' subdomain if not started RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} ^(secure)\.([^\.]+\.[^\.]+)$ [NC] RewriteRule ^(.*)$ https://%1.%2/$1 [L,R=301] # rewrite 'secure' subdomain RewriteCond %{HTTP_HOST} ^(demo|secure)\.[^\.]+\.[^\.]+$ [NC] RewriteCond %{REQUEST_URI} !^/_secure/ [NC] RewriteRule ^(.*)$ /_secure/$1 [L] # rewrite 'api' subdomain RewriteCond %{HTTP_HOST} ^api\.[^\.]+\.[^\.]+$ [NC] RewriteCond %{REQUEST_URI} !^/_api/ [NC] RewriteRule ^(?:([^/]+)/)?(?:([^/]+)/)?(?:([^/]+)/)?(?:([^/]+)/)?(?:([^/]+)/)?(?:([^/]+)/)? /_api/?%{QUERY_STRING}&v=$1&i=$2&k=$3&a=$4&t=$5&f=$6 [L] # redirect non-active subdomain to 'www' RewriteCond %{HTTP_HOST} !^(admin|api|demo|files|secure|www)\.([^\.]+\.[^\.]+)$ [NC] RewriteRule ^(.*)$ http://www.domain.com [L,R=301] # hide file extensions RewriteCond %{HTTP_HOST} ^www\. [NC] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !\.php$ [NC] RewriteCond %{REQUEST_URI} ^/([^/]*)/(?:([^/]*)/)?(?:([^/]*)/)?$ [NC] RewriteRule ^(.*)$ /%1.php?%{QUERY_STRING}&subpage=%2&subsection=%3 [L]

  Read the article

• Ubuntu+Win7--disk error press any key to restart

  - by Siddharth

  Apparently,none of the solutions in any other posts and forums worked for me For some reasons I decided to remove ubuntu from my hard disk drive. My partition table(presently): (/dev/sda1) (fat32) 900 MiB ---(MBR,I suppose) (/dev/sda2) (ntfs) 70 GiB -----(Windows 7) (/dev/sda3) (ntfs) 314.88 GiB --(Personal File storage) (/dev/sda4) (ext4) 80 GiB -----(Ubuntu 13.04) (unallocated) -----1.31 MiB So,after moving(cut-paste) everything(for backup) from the fat32 partition using win7..I booted into Ubuntu and copied the remaining 3 files(hidden in Win7 file explorer) --bootmgr,bootsect.bak,and one more which I do not remember.TERRIBLE MISTAKE After this I again booted into Windows and deleted ext4 partition..formatted it to ntfs..and shut down the pc.Then,I put in a Win7 bootable USB..using command prompt I entered bootrec /fixmbr,and bootrec /fixboot.. Restarting showed me the GRUB..choosing windows 7 showed me "Disk Error. Press any key to restart." I also installed a fresh Win7 installation on the 80 GiB partition expecting a Windows Legacy Bootloader with two win7 options..but did not work. Then..I used a Ubuntu LiveUSB to put it back to the present configuration(above) since all methods to restore the MBR failed.. I copied back the fat32 partitions backup files but couldn't copy those 3 files.Somehow ,they had been recreated and were non-replaceable. I do not want to format the win7 partition for a fresh one. I have used boot-repair..Restore MBR option brings back to "Disk error...." without even going through grub..so I reinstalled grub and I'm able to boot into Ubuntu. grub menu shows the win7 option as "Windows 7 (loader) (on /dev/sda1)". paste.ubuntu.com/5753710 paste.ubuntu.com/5775999

  Read the article

• Questions about explorer.exe

  - by nmuntz

  Hi, I was given by my company a laptop with Windows XP Professional in Spanish. I would like to translate it to English, since I really DISLIKE to use localized versions of programs. I have read about Windows MUI packs, however you MUST have Windows XP Pro in English in order to translate it to other language, you can't translate it TO English from other language. Since reinstalling the OS using a Win XP CD in english is not an option (don't have the license nor the CD, and don't have domain privileges to rejoin my computer to the domain), I was wondering what are the essential files that contain localized strings of text. I was doing some research, and apparently explorer.exe has many of the Windows Error Messages and other strings. Will replacing my original explorer.exe with one from Windows XP in English be enough (and work) for having a "basic" english version of windows? Im mainly interested in having error messages, start menu, and the control panel in english. Also, does it HAVE to be the same version as the Service Pack im running? Besides explorer.exe are there any other essential files that i should try to get and replace? Do you see any "dangers" in replacing this files with english version ones? Thanks in advance for your help.

  Read the article

• How can I have Vhosts with Lighttpd on Windows and keeping PHP through mod_cgi ?

  - by Pixelastic

  Hello, I installed Lighty on Windows 7 and managed to get it correctly serve both static and PHP files (through mod_cgi). At first I got the "No input file selected" message displayed when requesting a .php file. So, I updated the doc_root value in my php.ini to match the server.document-root defined in my Lighty config, and PHP stops complaining. Then I defined a VHost to point all foo.com requests to a specific dir. It worked well for all static files but when requesting a .php file, the mod_cgi was still picking files from the doc_root defined in php.ini, not in the directory I defined for server.document-root in my Vhost. I know its what's supposed to happen, PHP follows the config defined in php.ini. And I have to set this value in my php.ini otherwise no php is processed at all. What I don't understand is how I'm supposed to have virtual hosts with mod_cgi enabled here ? I tried adding [HOST=foo.com] section in the php.ini without any luck. I tried mod_fastcgi but could'n get it to work at all, I also tried mod_simple_host but could get it handle php. I managed to get it working by copying my PHP install to another dir (and changing the doc_root value) and adding a cgi.assign pointing to that install in my vhost. But this is a really hackish way, it means having one PHP install for each virtualhost. Note that I'm working on a development machine running Windows, this is not a production server, I just wanted to emulate the final Server config locally to test some changes. I googled a lot this problem but all I can find are people installing Lighty on windows with mod_cgi, or installing Lighty on Windows with virtual hosts, but I never found anyone who managed to get both.

  Read the article

• Uninstall Glassfish and metro completely

  - by user775829

  I thought of updating my Glassfish server from 2.1 to 3.1.1 in a Linux machine. I downloaded the .ZIP package. However during uninstalling of Glassfish v2.1 I did not find the uninstall.sh file in "bin" directory. Following are a few steps which I did... I removed the glassfish folder (rm -rf ...) After removing files in the end it gave me a notification that it could not remove 2 files used by Metro. I cant recollect those file names, but I manually deleted that folder. I made a mistake by first not uninstalling Metro. I uninstalled metro completely after that. but it seemed pointless (it uninstalled successfully :P ) I transfered the Glassfish 3.1.1 ZIP file and unzipped and configured it. FOllow are a few Problems I am facing I cannot deploy any of my WAR file. Its giving errors saying " Error creating bean,Instantiation of bean failed etc etc." (However the WAR file is getting deployed successfully in other Linux Machine) When I try installing Metro v2.1 separately, it does not show the admin console or it timesout while starting the domain. The Log File of the Domain says it has started the domain successfully and the process is also created. But after running the command (asadmin) it takes like forever and times out without showing Domain Started Successfully, There is no uninstall.sh in Glassfishv3.1.1 bin directory. How do I completely uninstall Glassfish v 3.1.1 and Metro 2.1 ??? What are the files which I will have to manually remove?

  Read the article

• 750Gig Hard Drive shows full with only 315Gigs used

  - by Chris Kelly

  I have a Win7 laptop with a 750Gig C: drive. It came partitioned with 714Gig usable from manufacturer. I installed programs, music files, etc up to 285 gigs. As of a few weeks ago it showed 285 Gigs. Two weeks of house guests later and it shows HD is full. I deleted some files but it still shows 652 Gigs on this drive while there are only 285 Gigs on drive. Relevant details: I am Administrator on laptop and have fair knowledge of what I am doing. I did not restore from backup, restore from mirror, upgrade HD's or anything else that would have touched the partition structure. Just daily use as imaging machine and web. I have checked partitions under disk administrator - no change, still partitioned with 714Gigs usable. Have looked through computer C drive by hand showing Hidden files and folders - no change. I have used JDisk Report to double check - it shows I have only 285 Gigs on C drive. I triple checked with TreeSize run as Administrator and it also shows 285 Gigs on C drive - yet Windows 7 still shows almost full. I used Windows 7 Utilities to Check for Disk Errors, and Defragged the drive. No errors shown and no change after Defrag.

  Read the article

• Large scale file replication with an option to "unsubscribe" from a replicated file on a given machine

  - by Alexander Gladysh

  I have a 100+ GB files per day incoming on one machine. (File size is arbitrary and can be adjusted as needed.) I have several other machines that do some work on these files. I need to reliably deliver each incoming file to the worker machines. A worker machine should be able to free its HDD from a file once it is done working with it. It is preferable that a file would be uploaded to the worker only once and then processed in place, and then deleted, without copying somewhere else — to minimize already high HDD load. (Worker itself requires quite a bit of bandwidth.) Please advise a solution that is not based on Java. None of existing replication solutions that I've seen can do the "free HDD from the file once processed" stuff — but maybe I'm missing something... A preferable solution should work with files (from the POV of our business logic code), not require the business logic to connect to some queue or other. (Internally the solution may use whatever technology it needs to — except Java.)

  Read the article

• Write once, read many (WORM) using Linux file system

  - by phil_ayres

  I have a requirement to write files to a Linux file system that can not be subsequently overwritten, appended to, updated in any way, or deleted. Not by a sudo-er, root, or anybody. I am attempting to meet the requirements of the financial services regulations for recordkeeping, FINRA 17A-4, which basically requires that electronic documents are written to WORM (write once, read many) devices. I would very much like to avoid having to use DVDs or expensive EMC Centera devices. Is there a Linux file system, or can SELinux support the requirement for files to be made complete immutable immediately (or at least soon) after write? Or is anybody aware of a way I could enforce this on an existing file system using Linux permissions, etc? I understand that I can set readonly permissions, and the immutable attribute. But of course I expect that a root user would be able to unset those. I considered storing data to small volumes that are unmounted and then remounted read-only, but then I think that root could still unmount and remount as writable again. I'm looking for any smart ideas, and worst case scenario I'm willing to do a little coding to 'enhance' an existing file system to provide this. Assuming there is a file system that is a good starting point. And put in place a carefully configured Linux server to act as this type of network storage device, doing nothing else. After all of that, encryption on the files would be useful too!

  Read the article

• How to write rules for persistent net names?

  - by ndemou

  I know that a process generates persistent network card names based on rules found in /lib/udev/rules.d/75-persistent-net-generator.rules. I also know how to completely disable this process with a simple echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules but I've read that I "could also write my own rules file to give the interface a name — the persistent rules generator ignores the interface if a name has already been set" (/etc/udev/rules.d/README confirms that this is possible). Do you have any pointers to documentation about how to write such rules? (I mostly care about Debian/Ubuntu and a bit less for CentOS) As a specific example of why I want to write custom rules: I have two identical servers with one onboard LAN and one PCI LAN. In case of HW failure I want to be able to move disks from HW#1 to HW#2 and it's important for eth0 to continue pointing to the onboard card and eth1 to the PCI card (no one wants to mess with cabling in the middle of a HW failure panic). My current workaround works but is a lot of work[1] so I wonder if writing custom rules would allow me to express something simple like this: cards with MAC A or B should be named eth0 cards with MAC C or D should be named eth1 follow default naming scheme for anything else [1] install the OS in HW#1 and keep a copy of /etc/udev/rules.d/70-persistent-net.rules. Move the disks to HW#2 and keep a second copy of the same file. Concatenate the two copies and manually edit the NAME="ethX" part. Replace /etc/udev/rules.d/70-persistent-net.rules with my version. Finally disable auto-creation of a new 70-persistent-net.rules using echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules

  Read the article

• Apache RewriteEngine, redirect sub-directory to another script

  - by Niklas R

  I've been trying to achieve this since about 1.5 hours now. I want to have the following transformations when requesting sites on my website: homepage.com/ => index.php homepage.com/archive => index.php?archive homepage.com/archive/site-01 => index.php?archive/site-01 homepage.com/files/css/main.css => requestfile.php?css/main.css The first three transformations can be done by using the following: RewriteEngine on RewriteRule ^/?$ index.php RewriteRule ^/?(.*)$ index.php?$1 However, I'm stuck at the point where all requests to the files subdirectory should be redirected to requestfile.php. This is one of the tries I've done: RewriteEngine on RewriteRule ^/?$ index.php RewriteRule ^/?files/(.+)$ requestfile.php?$1 RewriteRule ^/?(.*)$ index.php?$1 But that does not work. I've also tried to put [L] after the third line, but that didn't help as I'm using this configuration in .htaccess and sub-requests will transform that URL again, etc. I fuzzed with the RewriteCond command but I couldn't get it to work. How needs the configuration to look like to achieve what I desire?

  Read the article

• Random “Lost connection to MySQL server at 'reading initial communication packet', system error: 0”

  - by user1606545

  Sometimes I get the error from MYSQL server: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 I cannot find the cause, since most of the time it works, but every week for some hours I get this error. I googled, but there seem to be only users which have this error permanently. But in this case, it only occurs sometimes. I checked hosts.allow and hosts.deny, but the host is allowed and not denied. Also sometimes I get the error: File './database/table.MYD' not found (Errcode: 24) It occurs very rarely. But it occurs for some hours once a week, sometimes on multiple days, but suddenly the problem disappears again. I have checked the open files limit. It's 2048 and should be absolutely enough. I also tried to increase the number of open files nevertheless, but no effect. I thought, perhaps the process does not close some tables. But this is impossible, because after a while everythings o.k. again and the process opens maximum 100 tables at once. I also checked the MySQL-runtime-environment, and there were 930 opened files. I cannot explain that. After a while it's 129. I am running a MySQL-Server on a SUSE-Linux machine. I connect to the MySQL-Server from another host by the command line tool "mysql" and by MySQL-C-connector. The MySQL-Server is version 5.0.67.

  Read the article

• WD Caviar Green Extremely Slow

  - by Steven

  I am encountering a really weird problem on my WD Caviar Green HDD. Well first of all I have 2 HDDs on my Desktop, one 160GB Seagate holding my Win7 Ultimate x64 and the problematic one, WD 1.5 Caviar Green for storage purpose. My problem is kinda weird, when I transfer files from my Seagate(C:) to my WD (D:) the speed is good (50-60MB/s). Then the problem arises when I transfer too "many" large files, the transfer speed would go straight down to kilobytes/s. Well after I cancelled the transfer and access my D:, even entering a folder requires loading for like 10 seconds. Such problem not only arises when I am transferring files to my D:, it seems like my WD can't handle much activities. For instance, last time I installed my game on D: and I would face much lag after playing for some time. When the same game is installed on C: no problem arises. Does anyone knows what is the problem? P/S: There was one temporary solution that I used to tried. After the "situation" occurs, I tried to access as many folders on D: as I can and let it load, repeating such actions and giving it some time bring the D: back to speedy transfer. However, large transfers would causes the situation to happen again. Does it have something to do with cache whatsoever?

  Read the article

• Whats the difference between pulling from a branch into master and pushing that branch onto master?

  - by Justin808

  In Tortoisegit, on the repository, I right-click and select sync. At the top of the dialog there are options for Local Branch and Remote Branch. If the local branch is named DeveloperA and the remote branch is master and I do a push, what happens? If the local branch is master and remote branch is DeveloperA and I Pull, what happens? If I am on the master branch and right click, select Merge and change the From to be my DeveloperA branch, what happens? If I try to push from master to remote master and the remote is updated git stops and tells me to pull. It seems if I push from DeveloperA to master it doens't stop, it just clobbers, it that correct? We're having an issue using git where the remote master branch gets clobbered at times and we are trying to figure out why. For example there is a developer working on his DeveloperA branch. He'll pull from master to get any updates, then push to master to push out his changes. But there are times that the push lists more files in the Out Commit list than he's edited. The odd thing is he can't revert those files as git is saying they are up to date and have not been modified. Yet when he pushes git pushes the files out. The problem is if there are changes between his pull and push the changes get clobbered.

  Read the article

• How can I tell why I have access to a file share on Windows Server

  - by Joel

  I have a file share on a Windows 2008 R2 server in a AD domain (call it \SECURESERVER\STUFF) and I am not sure if I have the share and folder permissions set up right. I noticed the problem when I set up new server (WORKGROUP\FOREIGNSERVER) that was not joined to the domain and tried to copy some files off of \SECURESERVER\STUFF. I was surprised to find that when I tried to access the files, it did not prompt me for a username and password and proceeded to give me full access to the files. That worried me so I tried the same thing on some workstations that were not in the domain and they did NOT have the same behavior (they did prompt for a username/password as desired/expected). So, I think there is something peculiar about FOREIGNSERVER. I am logging into it with a local admin account, but my domain and SECURESERVER should know nothing of this server. I've carefully gone through the share and folder permissions on the share but I can't find the reason that FOREIGNSERVER has access. How can I find out why FOREIGNSERVER has access to SECURESERVER?

  Read the article

• Have a set a cgi scripts shared by multiple domains

  - by rpat

  Goal: Have multiple domains share a set of cgi(perl) scripts Environment: Apache 2.0 on a dedicated Cent OS server. (Apache configuration files generated by cPanel) I have dozens of domains on the dedicated server. The domains set up by cPanel under VirtualHost section. I have almost no knowledge of Apache. Most of what I do is taken care of by cPanel. I would like to put a set of scripts under one directory (perhaps under / or /opt ) and for each of the domains, under the individual cgi-bin, I would like to create a symbolic link to this common directory. This way I am hoping to avoid having to keep a copy of scripts for every domain. Since Apache config files are generated by cPanel, I would not like to manually make changes to those. Beside, I could mess things up. I see that cPanel recommends use of include files rather than changing the httpd.conf Perhaps I need to have the following of symbolic links enabled in the cgi-bin directory and allow the web server user execute the scripts not owned by it. May be I am making things more complicated than they are. I would be glad to use any other means to achieve my goal. Thanks in advance for your help. *I asked this on stackoverflow and some one suggested that I could ask this on serverfault.

  Read the article

• What do Windows 8 Refresh and Reset my PC really do?

  - by Jerry Nixon

  In Windows 8 I can reset everything and reinstall Windows. I assume this will clear my drive and start from scratch? Is that right? Does this create a Windows.old folder? I see this dialog, but aren't my settings and preferences saved in the cloud? If I screw up my settings and reset like this, are my settings also refreshed back to defaults? Since I use SkyDrive to sync my files, my personal files are safe, right? Also, in Windows 8 I can refresh my PC without affecting files. Are my desktop and/or Windows store apps uninstalled when I refresh my PC? I see this dialog, but I still am not sure. For example, when it says apps are "kept" does that mean I don't have to buy them again or are they installed after the refresh is over for me? I assume "from disk" means desktop apps? Or maybe corp apps? What would motivate a user to choose between these two?

  Read the article

• Encrypted Windows 7 & Linux Advice Wanted

  - by Miles

  I would like to set up my laptop to dual boot Arch Linux and Windows 7 with file sharing and encryption. Just wanted some advice on going about this because I have not dealt with encryption nor file sharing. I have two 500GB hard drives, and this is my plan: Install Windows 7 across both hard drives Use a live CD to wipe out Windows boot loader and replace with Grub Legacy Use live CD to wipe out second hard drive and re-size the Windows partition located on first hard drive Install Arch Linux along side with Windows 7 on first hard drive, all remaining space goes to home folder as ext2 Install truecrypt and ext2fsd Concerns: Is this the most efficient way to share files between both OSes? Or should I just be using NTFS to store all my data? How would the file permissions work when sharing files between Windows and Linux? Is there a high likley hood of corruption, and what is the ease of backing up files from an encrypted disk? Anything I should look out for, conflict between Grub and Truecrypt? Thank you for any advice, and feel free to post any links you might find useful to me. I am trying to plan this out so I can minimize downtime as I do not want to spend more than a night on this, nor do I want to run into a major problem some time in the future.

  Read the article

• Cannot access new folders created in my Apache2 document-root

  - by user235101

  I have tried to create a new folder 'test' in my documentroot of my Apache2 installation, however, whenever I try and access it from a web-browser it gives me a 403 (forbidden) error. My virtualhosts file - <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName REMOVED DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride All AuthType Digest AuthName "documentroot" AuthDigestProvider file AuthUserFile /etc/apache2/htpasswd Require user REMOVED AllowOverride Indexes </Directory> <Directory /var/www/> Options FollowSymLinks Options -Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> <Directory /var/www/share/> Order Deny,Allow Allow from all Satisfy any </Directory> <Directory /var/www/REMOVED/> Order Deny,Allow Allow from all Satisfy any </Directory> <Directory /var/www/stream/> Order Deny,Allow Allow from all Satisfy any </Directory> <Directory /var/www/test> Order Deny,Allow Allow from all Satisfy any </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined <Directory /var/www/REMOVED> AuthType Digest AuthName "rutorrent" AuthDigestDomain /var/www/REMOVED/ http://46.105.127.19/REMOVED AuthDigestProvider file AuthUserFile /etc/apache2/htpasswd Require valid-user SetEnv R_ENV "/var/www/REMOVED" AllowOverride Indexes </Directory> </VirtualHost> Image of the permissions - Other information - If I create a new folder (and use chmod --reference to ensure it has the same permissions as an accessible folder), I get a 403 client-side. If I copy folder 'rapidleech' to the name 'rapidleech1', it will let access 'rapidleech1', but no longer 'rapidleech', until I delete the copy. In my logs I found nothing logged in errors.log, and only that it delivered a 403 in access.log. All the appropriate users are members of www-data.

  Read the article

• Thunderbird: export email account settings

  - by zpea

  I'd like to create a new profile for Thunderbird using the same mail accounts I already configured in my old profile. As it is quite a number of accounts, it would be great to have a way to export/import them instead of writing down the settings just to fill in again in the new profile. Using web search and search here I mainly found following suggestions that do not match what I need: Copy the whole profile: Not possible for me as I don't want to copy other settings, the downloaded mail data etc. and the old profile broke when running out of space in the home folder anyway. Use mozBackup: There seem to be several programs by that name (forks?). In any case, it's Windows-only and hence no option (I am mostly on Linux and prefer platform-independent solutions anyway) Use accountex: Seems to do what I want, but it is not compatible with current Thunderbird version (supports only up to version 3.1) Posts with various tips from 4 years ago: Top results in the web search with the G. But they do not work in current versions of Thunderbird either. Did I overlook anything? After all, it doesn't sound like I was looking for something nobody ever looked for.

  Read the article

• Setting up Virtual Host in Fedora Core 15 using apache

  - by Roland

  I'm trying to setup a couple of Virtual Host files on my Localhost PC running Fedora Core 15. Now I get this working, but now onloy one Virtual Host site works, and if I type in 127.0.0.1/test/testApp.php which is not related to the Virtual Host site , I get redirected to the Virtual Host site. Here's what I did. I created a new folder called virtualhosts in /etc/httpd/ where all my host files are stored in the following format site.conf In /etc/conf/httpd.conf I enabled NameVirtualHost *:80 and included the host files at the bottom of the config page like this Include virtualhosts/*.conf In /etc/hosts I added the line 127.0.0.1 website No when I run sudo httpd -t I get Syntax OK I restart apache and then the Virtualhost works, but as soon as I add other hosts and only use 127.0.0.1 as above it still links to the original host. Am I doing anything wrong here or left out something? An example of my Virtual Host file looks like this <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/website/ ServerName website ServerAlias website ErrorLog logs/dev-error_log CustomLog logs/dev-access_log common Alias /blog /var/www/html/blog/ <Directory /var/www/html/website/> Options FollowSymLinks Allow Override All Order allow,deny allow from all </Directory> #php_value error_reporting E_ALL & ~E_NOTICE & ~E_DEPRECATED php_flag display_errors On php_value date.timezone Europe/London </VirtualHost>

  Read the article

• How can I get write permission for the Web (Inetpub) directory on a new Win 7 machine?

  - by marcipollo

  I mirror my Web site on my laptop, and am trying to move the mirror site to a new laptop. I copied the files to the Inetpub directory, and can view them perfectly, but they are read-only (the check-mark is grey, not black), and I cannot change the permission. When I un-check the read-only attribute on the Inetpub directory, and click "apply" it displays a dialog box stating that I need administrative permission to change the attributes. (I am logged in as an administrator). When I click "continue," it pops up another dialog box saying access is denied to the attributes of the file: c:\inetpub\custerr\en-us\500-100.asp That dialog box has an "ignore" button, and if I click that, it appears to work through the directory tree setting the permissions. It leaves all of the files (leafs) set to "read-write," but the directories remain "read only." I am using 64-bit Windows 7. I stopped the IIS service while doing all of this. Might it have something to do with the fact that I copied the files from a different machine in the workgroup (my old laptop)?

  Read the article

• Windows 7 - ignore security when reading external drive

  - by w-

  hi, My system hard drive on an XP computer kind of failed (random corrupt sectors). So i got a new harddrive and am trying to recover the files. The filesystem is NTFS. The system i'm trying to use when recovering the files is Windows 7. I'm obviously an admin on this box. The last data i'm trying to recover is stuff in the Documents and Settings folder. I'm using a SATA to a USB cable thingy so that I just plug it in as an External Hard Drive. The problem: In Windows Explorer when i try to copy the data, I keep getting prompted with Security warnings and error messages. It keeps telling me i have to change the owner permissions of the folder and all it's contents. If i tell it to change all the files and folder permissions it takes a really long time because it has to recurse through all the folder contents to change the permissions. Is there a way for me to ignore the file permissions when doing this? thanks

  Read the article

< Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >