Search Results

Search found 20383 results on 816 pages for 'hello'.

Page 614/816 | < Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >

• NetBSD Networking

  - by Mike

  Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

  Read the article

• BSOD Dump - EXCEPTION_DOUBLE_FAULT - ON Windows 2008 Server 64bit

  - by Mark K

  Hello, my windows 2008 server (datacenter ed) 64bit , have recently created a series of BSOD on a different applications. the error message is in general EXCEPTION_DOUBLE_FAULT. Can anyone please help with the analysis of the dump file bellow- Best regards, Mark 2: kd !analyze -v * Bugcheck Analysis * * UNEXPECTED_KERNEL_MODE_TRAP (7f) This means a trap occurred in kernel mode, and it's a trap of a kind that the kernel isn't allowed to have/catch (bound trap) or that is always instant death (double fault). The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps are. Here is a portion of those codes: If kv shows a taskGate use .tss on the part before the colon, then kv. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp that goes with the procedure KiTrap) Endif kb will then show the corrected stack. Arguments: Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT Arg2: 0000000080050033 Arg3: 00000000000006f8 Arg4: fffff800018b1678 Debugging Details: BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP PROCESS_NAME: CustomerService. CURRENT_IRQL: 1 EXCEPTION_RECORD: fffffa6004e45568 -- (.exr 0xfffffa6004e45568) ExceptionAddress: fffff800018a0150 (nt!RtlVirtualUnwind+0x0000000000000250) ExceptionCode: 10000004 ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: 00000000000000d8 TRAP_FRAME: fffffa6004e45610 -- (.trap 0xfffffa6004e45610) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000050 rbx=0000000000000000 rcx=0000000000000004 rdx=00000000000000d8 rsi=0000000000000000 rdi=0000000000000000 rip=fffff800018a0150 rsp=fffffa6004e457a0 rbp=fffffa6004e459e0 r8=0000000000000006 r9=fffff8000181e000 r10=ffffffffffffff88 r11=fffff80001a1c000 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!RtlVirtualUnwind+0x250: fffff800018a0150 488b02 mov rax,qword ptr [rdx] ds:00000000000000d8=???????????????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff800018781ee to fffff80001878450 STACK_TEXT: fffffa6001768a68 fffff800018781ee : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt!KeBugCheckEx fffffa6001768a70 fffff80001876a38 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiBugCheckDispatch+0x6e fffffa6001768bb0 fffff800018b1678 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDoubleFaultAbort+0xb8 fffffa6004e44e30 fffff800018782a9 : fffffa6004e45568 0000000000000001 fffffa6004e45610 000000000000023b : nt!KiDispatchException+0x34 fffffa6004e45430 fffff800018770a5 : 0000000000000000 0000000000000000 0000000000000000 0000000000000001 : nt!KiExceptionDispatch+0xa9 fffffa6004e45610 fffff800018a0150 : fffffa6004e46638 fffffa6004e46010 fffff80001965190 fffff8000181e000 : nt!KiPageFault+0x1e5 fffffa6004e457a0 fffff800018a3f78 : fffffa6000000001 0000000000000000 0000000000000000 ffffffffffffff88 : nt!RtlVirtualUnwind+0x250 fffffa6004e45810 fffff800018b1706 : fffffa6004e46638 fffffa6004e46010 fffffa6000000000 0000000000000000 : nt!RtlDispatchException+0x118 fffffa6004e45f00 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDispatchException+0xc2 STACK_COMMAND: kb FOLLOWUP_IP: nt!KiDoubleFaultAbort+b8 fffff800`01876a38 90 nop SYMBOL_STACK_INDEX: 2 SYMBOL_NAME: nt!KiDoubleFaultAbort+b8 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4a7801eb FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 Followup: MachineOwner

  Read the article

• Windows Server 2008 / SQL 2008 Licensing for Authenticated Web Application

  - by MikeM

  Hello, I'm trying to crunch some numbers to see what the software costs involved are for hosting an application we are developing. Users will not be anonymous - they will need to log in. SQL Server 2008: SQL Server licensing is easy - it will be licensed per-processor. No real fuss there. The cost of CALs would be much higher for the number of users as compared to the processor licenses. Windows Server 2008: This is where it gets trickier. We need to license the OS for both the web servers (there will be a couple) plus the database servers (also a couple). The Web Servers could run on the Web Edition without a need for CALs, but if you continue reading, you will see that may not matter much because I will likely have user CALs for each user anyway. We can't use the "External Connector" for any of the Windows licenses, because that doesn't cover customers who are paying to access a hosted application. We can't use the Web Edition for the SQL Servers because that license only allows database running on Web Edition to host data for the local web application (i.e. other web servers can't connect to it). So that leaves us with the "full" editions of Windows Server for the database server OS. I find this a little rediculous, and I feel as though I must be missing something, but it looks to me like I will actually need to buy a CAL for every user who signs up to use our service. I feel like I'm missing something because that means that for every user, I have to shell out $40 for a CAL. That could be one or two years' worth of revenue from each user for an inexpensive service! Is there any way to serve a web application to authenticated users without paying for individual Windows Server CALs, if the web servers and SQL servers are seperate boxes?

  Read the article

• Existing open source software for wireless mesh networking?

  - by user70352

  Hello! My goal: Build a wireless mesh network with some ALIX 2D2 (500 MHz AMD Geode LX800 x86 CPU, 256MB RAM, Atheros wireless card) Aside from working like a normal wireless mesh network users should be able to read/write data from/to the ALIX Boxes and the ALIX boxes should be able to process data. Questions: Should I try to flash dd-wrt x86, voyage linux (linux.voyage.hk) or something else? What (open source) software should I look into before I start? Should I use a 'server' for data storage and processing instead of the ALIX boxes? Is it even possible to use the ALIX boxes for routing AND data storage and processing? Final notes: Data can be anything, for example, I want to setup a wireless mesh using the OLSRD protocol so my whole town gets wifi and can access songs on the network. It's not for that, but that's the idea. I'm not afraid of programing, compiling or working with *nix. This is mostly 'for fun' rather than for practicality. Thanks in advance for any feedback.

  Read the article

• Hudson authentication via wget is return http error 302

  - by Rafael

  Hello, I'm trying to make a script to authenticate in hudson using wget and store the authentication cookie. The contents of the script is this: wget \ --no-check-certificate \ --save-cookies /home/hudson/hudson-authentication-cookie \ --output-document "-" \ 'https://myhudsonserver:8443/hudson/j_acegi_security_check?j_username=my_username&j_password=my_password&remember_me=true' Unfortunately, when I run this script, I get: --2011-02-03 13:39:29-- https://myhudsonserver:8443/hudson/j_acegi_security_check? j_username=my_username&j_password=my_password&remember_me=true Resolving myhudsonserver... 127.0.0.1 Connecting to myhudsonserver|127.0.0.1|:8443... connected. WARNING: cannot verify myhudsonserver's certificate, issued by `/C=Unknown/ST=Unknown/L=Unknown/O=Unknown/OU=Unknown/CN=myhudsonserver': Self-signed certificate encountered. HTTP request sent, awaiting response... 302 Moved Temporarily Location: https://myhudson:8443/hudson/;jsessionid=087BD0B52C7A711E0AD7B8BD4B47585F [following] --2011-02-03 13:39:29-- https://myhudsonserver:8443/hudson/;jsessionid=087BD0B52C7A711E0AD7B8BD4B47585F Reusing existing connection to myhudsonserver:8443. HTTP request sent, awaiting response... 404 Not Found 2011-02-03 13:39:29 ERROR 404: Not Found. There's no error log in any of hudson's tomcat log files. Does anyone has any idea about what might be happening? Thanks.

  Read the article

• Problem running Apache-Tomcat on every web browser installed in Windows 7

  - by Kush

  Hello everyone, I'm working on a web application in JSP and my web container is Apache Tomcat 7.0.2 (Its portable cross-platform version). As I've made extensive use of HTML5-CSS3 and my target browser is Google Chrome, I'm able to run the the Apache server only in Opera web browser, neither of the remaining installed browser run it. Here's the steps I have followed to start the server in my Windows 7 machine. -Placing the 'apache-tomcat-7.0.2' directory on my root partition (i.e. C: Drive) -Execute 'startup.bat' from 'bin' directory in it. (startup.sh if on Linux/Unix). -Then, a Console window opens that shows log during the setup of server (separately from Command Prompt), and I need to keep that console running in order to keep the Apache server running, so I minimize it. -Then, I open 'http://localhost:8080/' in various web browsers, and I could see Apache Server Homepage with same address only in Opera Web Browser (11.01), neither of other browsers installed can open it (Chrome 9, Firefox 4 Beta 10 or IE8). -I also tried other port numbers, but none of them worked. What can I do to make Apache run in every browser installed in my computer? I have my computer dual boot with Windows 7 and Ubuntu 10.10, and in Ubuntu, every web browser installed can run Apache once I start it, but same is not working in Windows.

  Read the article

• Ierrs on Network Interface - Pfsense/Freebsd

  - by JFA

  Hello all, We're using PfSense as an internal router/firewall (no connection to WAN). Using the Web-GUI, under Status --- Interfaces, there's one particular interface where I have some errors: In/out errors 3513/0 I then SSHed to the firewall to validate the info provided by the WebGUI and here's the output: # netstat -ni -I bce2 Name Mtu Network Address Ipkts Ierrs Opkt Oerrs Coll bce2 1500 <Link#3> 00:23:7d:cd:a2:a2 1404522323 3513 749797131 0 0 bce2 1500 10.42.1.0/24 10.42.1.24 6 - 6 - - As you can see, both present the same info (errors on incoming packets). I switched cables, changed network card, changed port on switch and I still see the errors. My 2 questions really are: 1) Is there any way I could get more info on the nature of these errors? or is this all I can get? 2) Should I be worried about this? As you can see, the errors are a VERY LOW percentage of all the total incoming packets. In other words, is this normal on a high-traffic gigabit interface? Thanks! JFA

  Read the article

• Need help with yum,python and php in CentOS. (I made a complete mess!)

  - by pek

  Hello, a while back I wanted to install some plugins for Trac but it required python 2.5 I tried installing it (I don't remember how) and the only thing I managed was to have two versions of python (2.4 and 2.5). Trac still uses the old version but the console uses 2.5 (python -V = Python 2.5.2). Anyway, the problem is not python, the problem is yum (which uses python). I am trying to upgrade my PHP version from 5.1.x to 5.2.x. I tried following this tutorial but when I reach the step with yum I get this error: [root@XXX]# yum update Loading "installonlyn" plugin Setting up Update Process Setting up repositories Reading repository metadata in from local files Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.main(sys.argv[1:]) File "/usr/share/yum-cli/yummain.py", line 94, in main result, resultmsgs = base.doCommands() File "/usr/share/yum-cli/cli.py", line 381, in doCommands return self.yum_cli_commands[self.basecmd].doCommand(self, self.basecmd, self.extcmds) File "/usr/share/yum-cli/yumcommands.py", line 150, in doCommand return base.updatePkgs(extcmds) File "/usr/share/yum-cli/cli.py", line 672, in updatePkgs self.doRepoSetup() File "/usr/share/yum-cli/cli.py", line 109, in doRepoSetup self.doSackSetup(thisrepo=thisrepo) File "/usr/lib/python2.4/site-packages/yum/init.py", line 338, in doSackSetup self.repos.populateSack(which=repos) File "/usr/lib/python2.4/site-packages/yum/repos.py", line 200, in populateSack sack.populate(repo, with, callback, cacheonly) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 91, in populate dobj = repo.cacheHandler.getPrimary(xml, csum) File "/usr/lib/python2.4/site-packages/yum/sqlitecache.py", line 100, in getPrimary return self._getbase(location, checksum, 'primary') File "/usr/lib/python2.4/site-packages/yum/sqlitecache.py", line 86, in _getbase (db, dbchecksum) = self.getDatabase(location, metadatatype) File "/usr/lib/python2.4/site-packages/yum/sqlitecache.py", line 82, in getDatabase db = self.makeSqliteCacheFile(filename,cachetype) File "/usr/lib/python2.4/site-packages/yum/sqlitecache.py", line 245, in makeSqliteCacheFile self.createTablesPrimary(db) File "/usr/lib/python2.4/site-packages/yum/sqlitecache.py", line 165, in createTablesPrimary cur.execute(q) File "/usr/lib/python2.4/site-packages/sqlite/main.py", line 244, in execute self.rs = self.con.db.execute(SQL) _sqlite.DatabaseError: near "release": syntax error Any help? Thank you.

  Read the article

• OpenSolaris / Nexenta problems with NetXen 4-port NIC card (ntxn driver)

  - by ewwhite

  Hello, I'm running NexentaStor Enterprise on an HP ProLiant DL180 G6 server. The onboard NIC interfaces surface as igb0 and igb1 and work well. However, I've added an HP NC375T 4-port network card using the NetXen 3031 chipset. This card should be handled by the ntxn driver in the SUNWntxn package, but that results in "ntxn0: failed to map doorbell" messages upon boot. The network interfaces don't show up. After some research, I found HP's driver package for the card. The release notes for the driver package state: This version of the Driver is supported only on Oracle Solaris 10 5/09 & 10/09. Oracle Solaris 10 5/09 & 10/09 contain an older version of NetXen P3 driver package called SUNWntxn. So, adding another version of NetXen P3 driver package using pkgadd command might result in conflicts with the NetXen driver binary & related files. Users are advised to uninstall native SUNWntxn driver package before installing the new package. The install completes, but I end up with a different set of errors in initializing the card. ifconfig ntxn0 plumb ifconfig: cannot open link "ntxn0": DLPI link does not exist dmesg output: Jan 29 07:20:17 ch-san2 ntxn: [ID 977263 kern.warning] WARNING: Memory not available Jan 29 07:20:17 ch-san2 ntxn: [ID 404858 kern.notice] NOTICE: ntxn0: Mac registration error Trying to manually create the device files: root@ch-san2:/volumes# add_drv -i "4040,100" ntxn ("ntxn") already in use as a driver or alias. Update the driver: root@ch-san2:/volumes# update_drv -f ntxn devfsadm: driver failed to attach: ntxn Warning: Driver (ntxn) successfully added to system but failed to attach Any ideas on how to get this driver working, or should I ditch the card and go with an Intel or something else?

  Read the article

• fedora12, yum not releasing "lock" after performing an action

  - by James.Elsey

  Hello, This problem has been occurring quite frequently recently and I can't seem to find a way of preventing it. Whenever I perform an action with yum such as to install or remove software, it appears to execute successfully but then I'm unable to move onto the next yum command For example, I executed yum remove skype, it appeared to remove ok, but next when I try to yum search skype it appears that yum is still processing, and I have to manually kill that process via kill 1234 (or whatever the PID is) My output is as follows [root@nevada james]# yum remove skype Loaded plugins: presto, refresh-packagekit Setting up Remove Process Resolving Dependencies --> Running transaction check ---> Package skype.i586 0:2.1.0.47-fc10 set to be erased --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Removing: skype i586 2.1.0.47-fc10 installed 24 M Transaction Summary ================================================================================ Remove 1 Package(s) Reinstall 0 Package(s) Downgrade 0 Package(s) Is this ok [y/N]: y Downloading Packages: Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Erasing : skype-2.1.0.47-fc10.i586 1/1 Removed: skype.i586 0:2.1.0.47-fc10 Complete! [root@nevada james]# yum search skype Loaded plugins: presto, refresh-packagekit Existing lock /var/run/yum.pid: another copy is running as pid 3639. Another app is currently holding the yum lock; waiting for it to exit... The other application is: PackageKit Memory : 79 M RSS (372 MB VSZ) Started: Fri Dec 18 08:39:18 2009 - 00:01 ago State : Sleeping, pid: 3639 Kernel version : 2.6.31.6-166.fc12.x86_64 Any ideas how I can prevent this behaviour? Thanks

  Read the article

• can't get php mail() working on Ubuntu desktop version with sendmail and postfix

  - by EricP

  I'm running Ubuntu 9.10 LAMP and trying to do a simple email test with PHP and I'm not getting any emails sent. mail("[email protected]", "eric-linux test", "test") or die("can't send mail"); I get no errors from PHP when running that script. In my php.ini file is: sendmail_path = /usr/lib/sendmail -t -i $ sudo ps aux | grep sendmail eric 2486 0.0 0.4 8368 2344 pts/0 T 14:52 0:00 sendmail -s “Hello world” [email protected] eric 8747 0.0 0.3 5692 1616 pts/2 T 16:18 0:00 sendmail eric 8749 0.0 0.3 5692 1636 pts/2 T 16:18 0:00 sendmail start eric 9190 0.0 0.3 5692 1636 pts/2 T 19:12 0:00 sendmail start eric 9192 0.0 0.3 5692 1616 pts/2 T 19:12 0:00 sendmail eric 9425 0.0 0.3 5692 1620 pts/1 T 19:37 0:00 sendmail eric 9427 0.0 0.3 6584 1636 pts/1 T 19:37 0:00 sendmail restart eric 9429 0.0 0.3 5692 1636 pts/1 T 19:38 0:00 /usr/lib/sendmail restart eric 9432 0.0 0.1 3040 804 pts/1 R+ 19:38 0:00 grep --color=auto sendmail When I run $ sendmail start it just hangs there doing nothing. I installed postfix also to see if it would help, but it didn't. I tried to see port 25: eric@eric-linux:~$ telnet localhost 25 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 eric-linux ESMTP Postfix (Ubuntu) thanks

  Read the article

• Video and LAN Cards are not recognized on Intel DG41RQ MB

  - by artyom

  Hello, My 32 bit Debian Etch with Etch-n-Half kernel 2.6.24 and Etch-n-half video driver xserver-xorg-video-intel 2.2.1-1~etchnhalf2 does not recognize my on-board LAN and Video. I can work only with VESA display. And additional PCI LAN card (that I wanted to use for Cross-X-Cabel). output of lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10 According to MB Spec: Video: Intel G41 Express Chipset Graphics and Memory Controller Hub Graphics (GMCH) LAN: Realtek 8111D Gigabit Ethernet Controller LAN Support When I run dpkg-reconfigure xserver-xorg is suggest i810 driver but X does not start, it does not start with intel driver as well; only vesa. LAN I even can't find in lspci... the last Realtek card is external one 100MB card. Where to start from?

  Read the article

• PowerShell: New-PSDrive error handling

  - by mazebuhu

  Hello, I have a script where I mount with the command "New-PSDrive" a network drive. Now, since the script is running as a "cronjob" on a server I want to have some error detection. If for any reason the command New-PSDrive fails the script should stop executing and notify that something went wrong. I have the following code: Try { New-PSDrive -Name A -PSProvider FileSystem -Root \\server\share } Catch { ... handle error case ... } ... other code ... For testing reasons I specified a wrong server name and I get the following error "New-PSDrive : Drive root "\wrongserver\share" does not exist or it's not a folder". Which is OK since the server does not exists. But the script does not go into the Catch clause and stop. It happily continues to run and ends up in a mess since no drive is mounted :-) So my question, why? Is there any difference in Exception handling in PowerShell? I should also note that I'm a noob in PowerShell scripting. Bye, Martin

  Read the article

• How to install PHP5.3 and SQLite3 on Ubuntu 8.04

  - by richard

  Hello, I got a Ubuntu Hardy VPS and I am trying to install PHP5.3 with SQLite. I added the dotdeb PHP5.3 repository and succeeded in installing PHP5.3. But I need to install SQLite as well. When I'm trying to install php5-sqlite3 (sudo aptitude install php5-sqlite3) this is the output: The following packages are BROKEN: php5-sqlite3 The following NEW packages will be automatically installed: php-db php-pear php-sqlite3 The following NEW packages will be installed: php-db php-pear php-sqlite3 0 packages upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 460kB of archives. After unpacking 3027kB will be used. The following packages have unmet dependencies: php5-sqlite3: Depends: phpapi-20060613 which is a virtual package. Resolving dependencies... The following actions will resolve these dependencies: Remove the following packages: libapache2-mod-php5 php5 php5-mysql Install the following packages: php-pear [5.2.4-2ubuntu5.10 (hardy-updates, hardy-security)] Downgrade the following packages: php5-cli [5.3.1-0.dotdeb.1 (<NULL>, now) -> 5.2.4-2ubuntu5.10 (hardy-updates, hardy-security)] php5-common [5.3.1-0.dotdeb.1 (<NULL>, now) -> 5.2.4-2ubuntu5.10 (hardy-updates, hardy-security)] php5-suhosin [5.3.1-0.dotdeb.1 (<NULL>, now) -> 0.9.22-1 (hardy)] Score is 197 Accept this solution? [Y/n/q/?] Obviously, downgrading PHP is not an option. Please help me! If upgrading the server to a newer release of Ubuntu makes things easier, that's not a problem.

  Read the article

• directory with 980MB meta data, millions of files, how to delete it? (ext3)

  - by Alexandre

  Hello, So I'm stuck with this directory: drwxrwxrwx 2 dan users 980M 2010-12-22 18:38 sessions2 The directories contents is small - just millions of tiny little files. I want to wipe it from the filesystem but have been unable to. My first try was: find sessions2 -type f -delete and find sessions2 -type f -print0 | xargs -0 rm -f but had to stop because both caused escalating memory usage. At one point it was using 65% of the system's memory. So I thought (no doubt incorrectly), that it had to do with the fact that dir_index was enabled on the system. Perhaps find was trying to read the entire index into memory? So I did this (foolishly): tune2fs -O^dir_index /dev/xxx Alright, so that should do it. Ran the find command above again and... same thing. Crazy memory usage. I hurriedly ran tune2fs -Odir_index /dev/xxx to reenable dir_index, and ran to Server Fault! 2 questions: 1) How do I get rid of this directory on my live system? I don't care how long it takes, as long as it uses little memory and little CPU. By the way, using nice find ... I was able to reduce CPU usage, so my problem right now is only memory usage. 2) I disabled dir_index for about 20 minutes. No doubt new files were written to the filesystem in the meanwhile. I reenabled dir_index. Does that mean the system will not find the files that were written before dir_index was reenabled since their filenames will be missing from the old indexes? If so and I know these new files aren't important, can I maintain the old indexes? If not, how do I rebuild the indexes? Can it be done on a live system? Thanks!

  Read the article

• Debian Apache2 and SSL

  - by Topher Fangio

  Hello all, I recently took over a server that is using Apache2 with SSL. I have setup a new server to which I am migrating all of the old websites so that we can more easily scale (it's a cloud server) and so that I can set everything up correctly (or at least with some sort of convention). I have read quite a few articles on setting up Apache2 and SSL with virtual hosts, but I'm a bit confused because all of the examples show three files and I only seem to have two. To compound the problem, they are all named differently (do the file extensions actually make a difference?). The examples show something to this effect: <VirtualHost X.X.X.X:443> ServerAlias something.mydomain.com ServerAdmin [email protected] DocumentRoot /var/www/project/client/site SSLEngine on SSLCertificateFile /etc/ssl/certs/mydomain-cert.pem SSLCertificateKeyFile /etc/ssl/private/mydomain-key.pem SSLCertificateChainFile /etc/ssl/certs/mydomain-ca.crt </VirtualHost> However, the files I have are: _.mydomain.com.crt gd_bundle.crt It is a wildcard certificate that we purchased through GoDaddy I believe. I believe that the first file is the actual certificate file and the gd_bundle.crt is the chain file, but that leaves me without a key file. There is also a random mydomain.csr file lying around on the old server, but it wasn't one of the files bundled with the download from GoDaddy, so I'm not really sure as to what it is. Any help in figuring out what I need to do would be greatly appreciated. I am software developer, so I know my way around computers, but I have only dabbled in server setup/maintenance. Much Thanks!

  Read the article

• I am getting a SQUID Error

  - by Dave

  Hello, What exactly is wrong here Entry in SQUID File--- httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on acl lan src 192.168.1.1 192.168.2.0/24 http_access allow localhost Error after: service squid restart 2010/02/01 14:24:29| Processing Configuration File: /etc/squid/squid.conf (depth 0) 2010/02/01 14:24:29| cache_cf.cc(361) parseOneConfigFile: squid.conf:10 unrecognized: 'broken_vary_encoding' 2010/02/01 14:24:29| WARNING: Netmasks are deprecated. Please use CIDR masks instead. 2010/02/01 14:24:29| WARNING: IPv4 netmasks are particularly nasty when used to compare IPv6 to IPv4 ranges. 2010/02/01 14:24:29| WARNING: For now we assume you meant to write /0 2010/02/01 14:24:29| WARNING: (B) '::/4294967200' is a subnetwork of (A) '::' 2010/02/01 14:24:29| WARNING: because of this '::' is ignored to keep splay tree searching predictable 2010/02/01 14:24:29| WARNING: You should probably remove '::/4294967200' from the ACL named 'all' 2010/02/01 14:24:29| WARNING: Netmasks are deprecated. Please use CIDR masks instead. 2010/02/01 14:24:29| WARNING: IPv4 netmasks are particularly nasty when used to compare IPv6 to IPv4 ranges. 2010/02/01 14:24:29| WARNING: For now we assume you meant to write /128 2010/02/01 14:24:29| aclParseIpData: unknown netmask '255.255.255.255' in '127.0.0.1/255.255.255.255' FATAL: Bungled squid.conf line 25: acl localhost src 127.0.0.1/255.255.255.255 Squid Cache (Version 3.1.0.14): Terminated abnormally. CPU Usage: 0.013 seconds = 0.006 user + 0.007 sys Maximum Resident Size: 0 KB Page faults with physical i/o: 0 Also please provide me with the simplest squid script for the proxy to run. Restrictions can be entered. Thanks Dave

  Read the article

• Override <customErrors mode="Off"/> message from .NET Framework even when in web.config detailed err

  - by GrZeCh

  Hello, is this possible to override .NET Framework error: Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. ... <!-- Web.Config Configuration File --> <configuration> <system.web> <customErrors mode="Off"/> </system.web> </configuration> even if web.config (IIS7.5) is set to <httpErrors errorMode="Detailed"/> ? I'm asking because my default setting for IIS7 is <deployment retail="true" /> so no error is being showed and only adding additional error handling module to website will allow to see errors generated by this application and thats why I want to override this message to inform users about it. Any ideas? Thanks

  Read the article

• ADSIEdit Cleanup After Exchange 2003 Crash During Transition To Exchange 2010

  - by ThaKidd

  Hello all. I would value some input from a few Exchange 2010 experts. I have almost completed the transition from Exchange 2003 Standard to Exchange 2010 Standard. Everything went smoothly until I tried to uninstall Exchange 2003. At that point the server bit the dust and died completely. I now have NO access to the old Exchange System Management MMC as I am running Windows 2008 SR2 and Windows 7 only. I can only fix this with ADSIEdit, EMShell, and EMConsole. I have used the 2010 shell to move/remove/verify that all mailboxes, public folders and OAB are hosted on Exchange 2010. I also verified that the routing connector has been deleted. The only two things that were not done was to remove the Recipient Update Service and actually perform the removal of the 2003 software. I have spent a lot of time going through ASDIedit and have located the old Administrative Group and the Exchange 2003 server listed under it. I also located the Recipient Update Service which includes two entries; Enterprise and my domain name. I have read that it is an unwise idea to remove the old administrative group so I won't bother messing with that. I am repeatedly getting three warnings in the Application Log. Both are from MSExchangeTransport EventID 5006 (Cannot find route to Mailbox Server OLDSERVER) and 5020 (The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003) So my questions are: To clean out AD of the old Exchange 2003 info, can I delete the server name folder (Configuration - Services - Microsoft Exchange - ExchOrg - Administrative Groups - First Administrative Group - Servers - Old Server) and also delete the Update Recipient Service (Enterprise) and Update Recipient Service (DOMAIN) containers safely? Are there any additional items I need to address to ensure the AD is clean? Thanks in advance for your help!

  Read the article

• Nameserver configuration error (Stealth NS records)

  - by Saif Bechan

  Hello i have a nameserver with a primary domain configured. Now i added a second domain, I have set NS records of the second domain to use the first domain, but i get some strange error. When i do the nameserver check at SIDN, for domains in the netherlands, i sais everything is right configured: Errors=0, Warnings=0, Informational=3 ** Summary: ACCEPTED centshopper.nl. ** Full check report: primary name server "ns1.rdshosting.nl." Info: name server looks correctly configured. secondary name server "ns2.rdshosting.nl." Info: name server looks correctly configured. secondary name server "ns3.rdshosting.nl." Info: name server looks correctly configured. ** DNScheck 4.2.6, 2010/03/12 23:19:58 CET+0100 Now when i check my dns settings over at http://intodns.com/centshopper.nl i get the following 2 errors: 1) Missing nameservers reported by parent FAIL: The following nameservers are listed at your nameservers as nameservers for your domain, but are not listed at the parent nameservers (see RFC2181 5.4.1). You need to make sure that these nameservers are working.If they are not working ok, you may have problems! ns3.rdshosting.nl 2) Stealth NS records sent Stealth NS records were sent: ns3.rdshosting.nl I am running plesk icw centos. In my opinion everything is ok. Does anyone know of this error and know what the possible cause would be. I have checked the first few hits on google already, and can't come up with a working solution. On a sidenote, can anyone explain to me what GLUE is and why i am not getting any. If you have been, thanks for reading!

  Read the article

• local msmtp and ovh hosting

  - by klez

  I have my personal email hosted on OVH (personal hosting plan) and I'm not able to send mails using msmtp. Here's a typical session ignoring system configuration file /etc/msmtprc: File o directory non esistente loaded user configuration file /home/klez/.msmtprc using account default from /home/klez/.msmtprc host = ssl0.ovh.net port = 465 timeout = off protocol = smtp domain = localhost auth = choose user = federicoculloca%xxxxxxx password = * ntlmdomain = (not set) tls = on tls_starttls = off tls_trust_file = (not set) tls_crl_file = (not set) tls_fingerprint = (not set) tls_key_file = (not set) tls_cert_file = (not set) tls_certcheck = off tls_force_sslv3 = off tls_min_dh_prime_bits = (not set) tls_priorities = (not set) auto_from = off maildomain = (not set) from = federicoculloca@xxxxxxxx dsn_notify = (not set) dsn_return = (not set) keepbcc = off logfile = (not set) syslog = (not set) reading recipients from the command line TLS certificate information: Owner: Common Name: ssl0.ovh.net Organizational unit: Domain Control Validated Issuer: Common Name: OVH Secure Certification Authority Organization: OVH SAS Organizational unit: Low Assurance Country: FR Validity: Activation time: lun 31 gen 2011 01:00:00 CET Expiration time: mer 15 feb 2012 00:59:59 CET Fingerprints: SHA1: F9:DC:41:F9:A2:38:51:9B:56:E4:98:E6:CD:81:31:42:E6:0E:26:6D MD5: FC:EC:F3:8F:28:E4:7E:28:99:89:E6:BB:C9:DF:71:CE <-- 220 ns0.ovh.net ssl0.ovh.net. You connect to mail427.ha.ovh.net ESMTP --> EHLO localhost <-- 250-ssl0.ovh.net. You connect to mail427.ha.ovh.net <-- 250-AUTH LOGIN PLAIN <-- 250-AUTH=LOGIN PLAIN <-- 250-PIPELINING <-- 250-8BITMIME <-- 250 SIZE 109000000 --> AUTH PLAIN xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx <-- 235 ok, go ahead (#2.0.0) --> MAIL FROM:<federicoculloca@xxxxx> --> RCPT TO:<[email protected]> --> DATA <-- 250 ok <-- 250 ok <-- 354 go ahead --> hello world --> . <-- 554 mail server permanently rejected message (#5.3.0) And my configuration # ~/.msmtp # Mostly from Peter Garrett's examples # https://lists.ubuntu.com/archives/ubuntu-users/2007-September/122698.html # Accounts from Scott Robbins' `A Quick Guide to Mutt' # http://home.nyc.rr.com/computertaijutsu/mutt.html account xxxxx host ssl0.ovh.net from federicoculloca@xxxxxx auth on user federicoculloca%xxxxxx password xxxxxx tls on tls_certcheck off tls_starttls off Any idea?

  Read the article

• Home Networking Questions

  - by Eddie Parker

  Hello: I'm looking to wire my home with CAT-X (where X is probably going to be CAT-6, unless someone can convince me differently. ;) ). I'm seeking advice on what equipment I'll need for the job, and any things I should watch out for. It's a two story half-duplex I'll be wiring, roughly about 1800 sq ft. Here's what I believe I need so far: Bulk CAT-6 Ethernet cabling CM Rated Gigabit switch(es?) Patch panel Equipment for cutting, terminating wire, fishing through walls, etc Wall outlet covers, etc. Questions I have: Does it matter the MHz rating on the Ethernet cable? If so, why? I have two gigabit switches currently, an 8-port and a 5-port. Should I buy one massive switch to cover all the connections I need, or should I just chain the two together and buy a switch for however many other connections I need? Do I really need a patch panel? I understand it keeps the cables looking cleaner than coming out of a hole in the wall, but is there some other product I can use, perhaps combining a switch with a patch panel or some such? Ideally I'll have all this running out of a relatively small closet, so the less components (or smaller) the better. Any advice, links, or suggested product to use/avoid would be appreciated!

  Read the article

• Gmail: security warning icon

  - by Notetaker

  Hello, I just enabled some Gmail Labs programs in my Gmail account, and then I noticed the orange triangle icon with an exclamation mark in it at the end of the address bar of my Google Chrome browser. Clicking on it brought forth a "Security Information' dialog box, with the following messages: "--mail.google.com The identity of website has been verified by Thawlte SGC CA. --Your connection to mail.google.com is encrypted with 128-bit encryption. However, this page includes other resources which are not secure. These resources can be viewed by others while in transit, and can be modified by an attacker to change the look or behavior of the page." I then logged into two of my other Gmail accounts, one of which has no Gmail Labs programs enabled, and the other with 1 program enabled quite some time ago, both with the same result as above (i.e., with the appearance of the orange triangle warning sign in the address bar). I don't remember seeing the orange triangle before, but I'm not sure if it has ever appeared or not. I have "Always use https" enabled for my Gmail accounts. My questions are: Is there a way to identify and remove these un-secure "resources"? (Could enabling Gmail Labs programs have brought these on?) Meanwhile, are my Gmail accounts compromised and unsafe to use? If so, what should I being doing about that now? After this problem is solved, would I need to reset the password to my Gmail accounts, and/or take any other measures to restore their security? Many thanks for answering my questions!

  Read the article

• Apache Simple Configuration Issue: per-user directory is accessing /~user instead of ~user

  - by Huckphin

  Hello. I am just getting Apache 2.2 running on Fedora 13 Beta 64-bit. I am running into issues setting my per-user directory. The goal is to make localhost/~user map to /home/~user/public_html. I think that I have the permissions right because I have 755 to /home/~user, and I have 755 to /home/~user/public_html/ and I have 777 for all contents inside of /home/~user/public_html/ recursively set. My mod_userdir configuration looks like this: <IfModule mod_userdir.c> # # UserDir is disabled by default since it can confirm the presence # of a username on the system (depending on home directory # permissions). # UserDir disabled root UserDir enabled huckphin # # To enable requests to /~user/ to serve the user's public_html # directory, remove the "UserDir disabled" line above, and uncomment # the following line instead: # UserDir public_html The error that I am seeing in the error log is this: [Sat May 15 09:54:29 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /~huckphin/index.html denied When I login as the apache user, I know that /~huckphin does not exist, and this is not what I want. I want it to be accessing ~huckphin, not /~huckphin. What do I need to change on my configuration for this to work?

  Read the article

• WordPress: can't access WordPress.com and other external sites?

  - by Rax Olgud

  Hello, I recently started a WordPress blog using hosting at MyDomain (they offer the application "natively"). The blog works fine, however I have two plugins I can't seem to install correctly. First, the WordPress.com Stats plugin requires the API Key. When I input it, I get the following message: Error from last API Key attempt: Your blog was unable to connect to WordPress.com. Please ask your host for help. (transport error - could not open socket: 110 Connection timed out) Second, the Akismet plugin is not configured. When I go to Akismet page to insert my API key, it has the following message: There was a problem connecting to the Akismet server. Please check your server configuration. I assume the two issues are related... I approached my hosting provider about the subject and all they said is that they don't support WordPress, only provide means to install it. To clarify, up to this point I have only been able to install plugins that don't require an API key. What can I do to diagnose the problem and fix it? As a work-around, are there comparable stats and anti-spam plugins that don't require an API key? Many thanks.

  Read the article

< Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >