Search Results

Search found 21343 results on 854 pages for 'pass by reference'.

Page 614/854 | < Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >

• Laptop Asus P50IJ with Intel 4500M GMA output going to a Dell 1907FP external monitor will not allow

  - by ProfessionalAmateur

  Hello - I just purchased an Asus P50IJ-X2 laptop which has a Intel GMA 4500M video card running Windows7. At work I output this laptop to a Dell 1907FP LCD which has a maximum resolution of 1280x1024. Not matter what I do the Windows will not allow the laptop to set a resolution higher than 1024x768 to this LCD monitor. Ive even gone to the extent of downloading PowerStrip (I'd post a link but Im new and can only enter 1 url, if you google for powerstrip its the first option) to create a custom driver for my monitor thinking Windows was having a hard time seeing the available resolutions it would accept. However, powerstrip read the registery and properly sees the monitor and what its capable of so Im now at a complete loss as to why Windows7 will not allow me to set/use a 1280x1024 resolution for this external monitor (as my last laptop did running Vista). The Intel documentation (http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/) indicates that the GMA 4500M should be able to run up to a 2560x1600 max res. The Dell 1907FP specification states it can run up to a 1280x1024 res. But no matter what the computer will not allow me to set higher than a 1024x768. I'm completely baffled but I would really like to be able to output this laptop to a reasonable resolution, 1024x768 makes me feel like I'm using my mom's computer. Any help would be greatly appreciated! Here are some attached images (I apologize for the links, being new I cannot post images) that should help explain this better: Image 1 - This image is from powerstrip which shows the monitors max accepted resolution and at the top right the max res my PC currently allows. (http://imgur.com/agrno.png) Image 2 - This shows my Windows7 resolution picker. (http://imgur.com/3nv6q.png) Image 3 - The 'List all modes' option taken from the Screen Resolution Advanced Settings List All Modes. (http://imgur.com/AMREh.png) Image 4 - Monitor information from registry read by powerstrip, this shows the laptop is able to read the necessary info from the LCD monitor. (http://imgur.com/hUX4D.png)

  Read the article

• Moving from WDS to MDT + WDS - Prestaged Computer Name

  - by MSCF

  We previously used just WDS to deploy our images. WDS was setup to request approval for new machines. We used the "Name and Approve" option to name the machines as we added them. If it was pre-existing, it would just use the existing computer name from AD. Then in our unattend.xml file we had Computername=%MACHINENAME%. This picked up the name we gave it during approval and set the computer name accordingly. We are now implementing MDT to manage our images and drivers. But upon testing, we noticed it would assign random computer names. I went into the Unattend.xml for the deploy task sequence and added that value under Specialize amd64_Microsoft-Windows-Shell-Setup_neutral Computername=%MACHINENAME%. But when we try applying the image, it errors out at that point of the install. How can an MDT deployment be configured to leverage the pre-staged name? Some additional info: Error message during the imaging process: Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup].? setuperr.log: 2014-07-22 14:02:13, Error [setup.exe] [Action Queue] : Unattend action failed with exit code 4 2014-07-22 14:02:13, Error [setup.exe] Execution of unattend GCs failed; hr = 0x0; pResults-hrResult = 0x8030000b

  Read the article

• Alter charset and collation in all columns in all tables in MySQL

  - by The Disintegrator

  I need to execute these statements in all tables for all columns. alter table table_name charset=utf8; alter table table_name alter column column_name charset=utf8; Is it possible to automate this in any way inside MySQL? I would prefer to avoid mysqldump Update: Richard Bronosky showed me the way :-) The query I needed to execute in every table: alter table DBname.DBfield CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_ci; Crazy query to generate all other queries: SELECT distinct CONCAT( 'alter table ', TABLE_SCHEMA, '.', TABLE_NAME, ' CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_ci;' ) FROM information_schema.COLUMNS WHERE TABLE_SCHEMA = 'DBname'; I only wanted to execute it in one database. It was taking too long to execute all in one pass. It turned out that it was generating one query per field per table. And only one query per table was necessary (distinct to the rescue). Getting the output on a file was how I realized it. How to generate the output to a file: mysql -B -N --user=user --password=secret -e "SELECT distinct CONCAT( 'alter table ', TABLE_SCHEMA, '.', TABLE_NAME, ' CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_ci;' ) FROM information_schema.COLUMNS WHERE TABLE_SCHEMA = 'DBname';" > alter.sql And finally to execute all the queries: mysql --user=user --password=secret < alter.sql Thanks Richard. You're the man!

  Read the article

• Apache ProxyPass with SSL

  - by BBonifield

  I have a QA setup that consists of multiple internal development servers and one world-accessible provisioning machine that is setup to proxy pass the web traffic. Everything works fine for non-SSL requests, but I'm having a hard time getting the SSL logic working as well. Here's a few example vhost blocks. <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev2.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev2.site.com </VirtualHost> I end up seeing the following error in the provisioner's error log. [Fri Jan 28 12:50:59 2011] [warn] [client 1.2.3.4] proxy: no HTTP 0.9 request (with no host line) on incoming request and preserve host set forcing hostname to be dev1.site.com for uri / As well as the following entry in the destination QA machine's access log. 192.168.168.101 - - [22/Feb/2011:08:34:56 -0600] "\x16\x03\x01 / HTTP/1.1" 301 326 "-" "-"

  Read the article

• Linking Linux MIT Kerberos with a Windows 2003 Active Directory

  - by Beerdude26

  Greetings, I was wondering how one might link a Linux MIT Kerberos with a Windows 2003 Active Directory to achieve the following: A user, [email protected], attempts to log in at an Apache website, which runs on the same server as the Linux MIT Kerberos. The Apache module first asks the local Linux MIT Kerberos if he knows a user by that name or realm. The MIT Kerberos finds out it isn't responsible for that realm, and forwards the request to the Windows 2003 Active Directory. The Windows 2003 Active Directory replies positively and gives this information to the Linux MIT Kerberos, which in turn tells this to the Apache module, which grants the user access to its files. Here is an image of the situation: http://img179.imageshack.us/img179/5092/linux2k3.png (I'm not allowed to embed images just yet.) The documentation I have read concerning this issue often differ from this problem: Some discuss linking up a MIT Kerberos with an Active Directory to gain access to resources on the Active Directory server; While another uses the link to authenticate Windows users to the MIT Kerberos through the Windows 2003 Active Directory. (My problem is the other way around.) So what my question boils down to, is this: Is it possible to have a Linux MIT Kerberos server pass through requests for a Active Directory realm, and then have it receive the reply and give it to the requesting service? (Although it's not a problem if the requesting service and the Windows 2003 Active Directory communicate directly.) Suggestions and constructive criticism are greatly appreciated. :)

  Read the article

• Find a non-case-sensitive text string within a range of cells

  - by Iszi

  I've got a bit of a problem to solve in Excel, and I'm not quite sure how to go about doing it. I've done a few searches online, and haven't really found any formulas that seem to be useful. Here's the situation (simplified just a bit, for the purpose of this question): I have data in columns A-E. I need to match data in the cells in A and B, with data in C-E, and return TRUE or FALSE to column F. Return TRUE if: - The string in A is found within any string in C-E. OR - The string in B is found within any string in C-E. Otherwise, return FALSE. The strings must be exact matches for whole or partial strings within the range, but the matching function must be case-insensitive. I've taken a screenshot of an example sheet for reference. I'm fairly sure I'll need to use IF or on the outermost layer of the formula, probably followed by OR. Then, for the arguments to OR, I'm expecting there will be some use of IFERROR involved. But what I'm at a loss for is the function I could most efficiently use to handle the text string searches. VLOOKUP is very limited in this regard, I think. It may be workable to do whole-string against whole-string comparisons, but I'm fairly certain it won't return accurate results for partial string matches. FIND and SEARCH appear limited to only single-target searches, and are also case-sensitive. I suppose I could use UPPER or LOWER to force case-insensitivity in the search, but I still need something that can do accurate partial matching and search a specified range of cells. Is there any function, or combination of functions, that could work here? Ideally, I want to do this with a straight Excel formula. I'm not at all familiar with VBScript or similar tools, nor do I have time to learn it for this project.

  Read the article

• openvpn TCP/UDP slow SSH/SMB performance

  - by Petr Latal

  I have question about strange behavior of my openVPN configuration on Debian lenny. I have 2 server configs (one proto tcp-server based and one proto udp based). ISP bandwidth is 7Mbit/7Mbit. When I uses proto tcp-server my download server rate is fine around 6,4 Mbit/s, but upload rate is about 3Mbit/s. When I uses proto udp, my download server rate is around 3Mbit/s and upload rate around 6,4Mbit/s. I tried to handle the MTU, MSSFIX and cipher on/off on server and client configs to synchronize rates, but without solution. Here is TCP based SERVER config: mode server tls-server port 1194 proto tcp-server dev tap0 ifconfig 11.10.15.1 255.255.255.0 ifconfig-pool 11.10.15.2 11.10.15.20 255.255.255.0 push "route 192.168.1.0 255.255.255.0" push "dhcp-option DNS 192.168.1.200" push "route-gateway 11.10.15.1" push "dhcp-option WINS 192.168.1.200" route-up /etc/openvpn/routeup.sh duplicate-cn ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key mssfix cipher BF-CBC Here is UDP based SERVER config: port 1194 proto udp dev tun0 local xx.xx.xx.xx server 11.10.15.0 255.255.255.0 ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 duplicate-cn script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key tun-mtu 1500 mssfix 1212 client-to-client ifconfig-pool-persist ipp.txt Here is TCP/UDP based windows CLIENT config: remote xx.xx.xx.xx --socket-flags TCP_NODELAY tls-client port 1194 proto tcp-client #proto udp dev tap #dev tun pull ca ca.crt cert latis.crt key latis.key mute 0 comp-lzo adaptive verb 3 resolv-retry infinite nobind persist-key auth-user-pass auth-nocache script-security 2 mssfix cipher BF-CBC

  Read the article

• linux nooB: Installing ffmpeg + dependencies on aws linux ami (repo issues)

  - by HdN8

  Im installing ffmpeg to run on an amazon linux ami, and have added the rpmforge repo and the dag repo. Here are some guidelines I'm using for reference: TWoZaO and Razuna The rpmforge repo has ffmpeg, but if you try to install it then it will complain that is missing dependencies (for me libSDL-1.2.so.0()(64bit)). Regardless I will install ffmpeg from svn so I can be sure to enable the options I want (namely libx264). It seems strange to me though that SDL is not in rpmforge or dag, and in according to both of my references above, it should be there. I tried to grab it manually from here, but it needs these dependencies, so no-go: error: Failed dependencies: SDL = 1.2.10-8.el5 is needed by SDL-devel-1.2.10-8.el5.x86_64 alsa-lib-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libGL-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libGLU-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libSDL-1.2.so.0()(64bit) is needed by SDL-devel-1.2.10-8.el5.x86_64 libX11-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libXext-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libXrandr-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libXrender-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 libXt-devel is needed by SDL-devel-1.2.10-8.el5.x86_64 Any advice for a linux nooB lost in a mess of repos and dependency errors?

  Read the article

• TeamCity EC2 Integration via ISA Server

  - by Tim Long

  I have a TeamCity server which is actually installed on SBS 2003 Premium with ISA Server (firewall/proxy) installed. My ADSL connection has multiple IP addresses, which all resolve directly to my SBS external NIC. The NIC is therefore multi-homed and I have allocated one of the IP addresses specifically to TeamCity. In ISA, I've created an access rule to allow the traffic in. I can access my TeamCity server externally and view the web interface, that all works fine. I want to use the Amazon EC2 integration in TeamCity to launch build agents 'in the cloud'. The problem I am having is that when the agent starts, it sees the server and registers, then just sits there waiting. On the server side, the agent appears as 'disconnected'. Examining the settings, the agent's IP address appears to be that of the external NIC. What I think might be happening is that the traffic is undergoing Network Address Translation (NAT) so that TeamCity always thinks the agent is locally installed and therefore can't communicate with the actual remote agent. This seems to happen even though I have a permanent static IP address dedicated to TeamCity. So, the question is this. How can I make traffic to a specific IP address pass through the ISA server un-NATted?

  Read the article

• Cisco 891w multiple VLAN configuration

  - by Jessica

  I'm having trouble getting my guest network up. I have VLAN 1 that contains all our network resources (servers, desktops, printers, etc). I have the wireless configured to use VLAN1 but authenticate with wpa2 enterprise. The guest network I just wanted to be open or configured with a simple WPA2 personal password on it's own VLAN2. I've looked at tons of documentation and it should be working but I can't even authenticate on the guest network! I've posted this on cisco's support forum a week ago but no one has really responded. I could really use some help. So if anyone could take a look at the configurations I posted and steer me in the right direction I would be extremely grateful. Thank you! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESI ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! aaa new-model ! ! aaa authentication login userauthen local aaa authorization network groupauthor local ! ! ! ! ! aaa session-id common ! ! ! clock timezone EST -5 clock summer-time EDT recurring service-module wlan-ap 0 bootimage autonomous ! crypto pki trustpoint TP-self-signed-3369945891 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3369945891 revocation-check none rsakeypair TP-self-signed-3369945891 ! ! crypto pki certificate chain TP-self-signed-3369945891 certificate self-signed 01 (cert is here) quit ip source-route ! ! ip dhcp excluded-address 192.168.1.1 ip dhcp excluded-address 192.168.1.5 ip dhcp excluded-address 192.168.1.2 ip dhcp excluded-address 192.168.1.200 192.168.1.210 ip dhcp excluded-address 192.168.1.6 ip dhcp excluded-address 192.168.1.8 ip dhcp excluded-address 192.168.3.1 ! ip dhcp pool ccp-pool import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 10.171.12.5 10.171.12.37 lease 0 2 ! ip dhcp pool guest import all network 192.168.3.0 255.255.255.0 default-router 192.168.3.1 dns-server 10.171.12.5 10.171.12.37 ! ! ip cef no ip domain lookup no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO891W-AGN-A-K9 sn FTX153085WL ! ! username ESIadmin privilege 15 secret 5 $1$g1..$JSZ0qxljZAgJJIk/anDu51 username user1 password 0 pass ! ! ! class-map type inspect match-any ccp-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-all ccp-insp-traffic match class-map ccp-cls-insp-traffic class-map type inspect match-any ccp-cls-icmp-access match protocol icmp class-map type inspect match-all ccp-invalid-src match access-group 100 class-map type inspect match-all ccp-icmp-access match class-map ccp-cls-icmp-access class-map type inspect match-all ccp-protocol-http match protocol http ! ! policy-map type inspect ccp-permit-icmpreply class type inspect ccp-icmp-access inspect class class-default pass policy-map type inspect ccp-inspect class type inspect ccp-invalid-src drop log class type inspect ccp-protocol-http inspect class type inspect ccp-insp-traffic inspect class class-default drop policy-map type inspect ccp-permit class class-default drop ! zone security out-zone zone security in-zone zone-pair security ccp-zp-self-out source self destination out-zone service-policy type inspect ccp-permit-icmpreply zone-pair security ccp-zp-in-out source in-zone destination out-zone service-policy type inspect ccp-inspect zone-pair security ccp-zp-out-self source out-zone destination self service-policy type inspect ccp-permit ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group 3000client key 67Nif8LLmqP_ dns 10.171.12.37 10.171.12.5 pool dynpool acl 101 ! ! crypto ipsec transform-set myset esp-3des esp-sha-hmac ! crypto dynamic-map dynmap 10 set transform-set myset ! ! crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address initiate crypto map clientmap client configuration address respond crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! ! ! ! interface FastEthernet0 ! ! interface FastEthernet1 ! ! interface FastEthernet2 ! ! interface FastEthernet3 ! ! interface FastEthernet4 ! ! interface FastEthernet5 ! ! interface FastEthernet6 ! ! interface FastEthernet7 ! ! interface FastEthernet8 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto ! ! interface GigabitEthernet0 description $FW_OUTSIDE$$ES_WAN$ ip address 10...* 255.255.254.0 ip nat outside ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto map clientmap ! ! interface wlan-ap0 description Service module interface to manage the embedded AP ip unnumbered Vlan1 arp timeout 0 ! ! interface Wlan-GigabitEthernet0 description Internal switch interface connecting to the embedded AP switchport trunk allowed vlan 1-3,1002-1005 switchport mode trunk ! ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$$FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly zone-member security in-zone ip tcp adjust-mss 1452 crypto map clientmap ! ! interface Vlan2 description guest ip address 192.168.3.1 255.255.255.0 ip access-group 120 in ip nat inside ip virtual-reassembly zone-member security in-zone ! ! interface Async1 no ip address encapsulation slip ! ! ip local pool dynpool 192.168.1.200 192.168.1.210 ip forward-protocol nd ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ip dns server ip nat inside source list 23 interface GigabitEthernet0 overload ip route 0.0.0.0 0.0.0.0 10.165.0.1 ! access-list 23 permit 192.168.1.0 0.0.0.255 access-list 100 remark CCP_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 10.165.0.0 0.0.1.255 any access-list 110 permit ip 192.168.0.0 0.0.5.255 any access-list 120 remark ESIGuest Restriction no cdp run ! ! ! ! ! ! control-plane ! ! alias exec dot11radio service-module wlan-ap 0 session Access point version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESIRouter ! no logging console enable secret 5 $1$yEH5$CxI5.9ypCBa6kXrUnSuvp1 ! aaa new-model ! ! aaa group server radius rad_eap server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa group server radius rad_acct server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa authentication login eap_methods group rad_eap aaa authentication enable default line enable aaa authorization exec default local aaa authorization commands 15 default local aaa accounting network acct_methods start-stop group rad_acct ! aaa session-id common clock timezone EST -5 clock summer-time EDT recurring ip domain name ESI ! ! dot11 syslog dot11 vlan-name one vlan 1 dot11 vlan-name two vlan 2 ! dot11 ssid one vlan 1 authentication open eap eap_methods authentication network-eap eap_methods authentication key-management wpa version 2 accounting rad_acct ! dot11 ssid two vlan 2 authentication open guest-mode ! dot11 network-map ! ! username ESIadmin privilege 15 secret 5 $1$p02C$WVHr5yKtRtQxuFxPU8NOx. ! ! bridge irb ! ! interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! ssid two ! antenna gain 0 station-role root ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface Dot11Radio0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 bridge-group 2 subscriber-loop-control bridge-group 2 block-unknown-source no bridge-group 2 source-learning no bridge-group 2 unicast-flooding bridge-group 2 spanning-disabled ! interface Dot11Radio1 no ip address no ip route-cache shutdown ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! antenna gain 0 dfs band 3 block channel dfs station-role root ! interface Dot11Radio1.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface GigabitEthernet0 description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router no ip address no ip route-cache ! interface GigabitEthernet0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface GigabitEthernet0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 no bridge-group 2 source-learning bridge-group 2 spanning-disabled ! interface BVI1 ip address 192.168.1.2 255.255.255.0 no ip route-cache ! ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag access-list 10 permit 192.168.1.0 0.0.0.255 radius-server host 192.168.1.5 auth-port 1812 acct-port 1813 key ***** bridge 1 route ip

  Read the article

• Which httpd.conf and php.ini files does plesk use

  - by Saif Bechan

  If i disable the include_path in /etc/php.ini, i can still see that there is an include path loaded from somewhere. I want to know where this file is. If i use phpinfo(); on my domain i get that there is a include path /usr/share/pear:/usr/share/php, even though in the php.ini i used: ;inlucde_path=".:" In the section for aditional php.ini files this is the list: /etc/php.d/curl.ini, /etc/php.d/dbase.ini, /etc/php.d/dom.ini, /etc/php.d/gd.ini, /etc/php.d/imap.ini, /etc/php.d/json.ini, /etc/php.d/mbstring.ini, /etc/php.d/mysql.ini, /etc/php.d/mysqli.ini, /etc/php.d/pdo.ini, /etc/php.d/pdo_mysql.ini, /etc/php.d/pdo_sqlite.ini, /etc/php.d/wddx.ini, /etc/php.d/xmlreader.ini, /etc/php.d/xmlwriter.ini, /etc/php.d/xsl.ini, /etc/php.d/zip.ini I have checked all these files but i can nowhere find a reference to pear. This said the /etc/httpd/conf/httpd.conf file is questioning to me too. If i check this file i can see the following values are defined. DocumentRoot "/var/www/html" <Directory /> Order Deny,Allow Deny from all Options None AllowOverride None </Directory> <Directory "/var/www/html"> Options None AllowOverride None Order allow,deny Allow from all </Directory> The strange thing is that i don't even use this directory, so where does plesk get his httpd.conf file from. I want to check if everything is ok, because my vhost.conf is not working. I don't know if i should change these values or not, and where i can find the values plesk uses. i hope someone can help me with this.

  Read the article

• DrayTek 2820 configuration using public IP addresses

  - by Kev

  I have a /29 range of public IP addresses assigned to me by my ISP. I'm trying to configure a SIP VOIP handset to register with my VOIP provider who recommend using public IP addresses rather than NAT. I have a DrayTek 2820 router flashed with the latest firmware and have configured my router as per DrayTek's FAQ at: How do I use a public subnet on the LAN (non-NAT operation ) ? My IP range is: xx.xx.94.16 -> xx.xx.94.23 This gives a usable range of: xx.xx.94.17 -> xx.xx.94.22 My router's public IP address is: xx.xx.94.17, the SIP VOIP handset is allocated xx.xx.94.18. I have a second internet connection and via that I can ping the handset. However for some reason I can't seem to get it to register with the provider. I tried adding a new Firewall filter to pass through from WAN to LAN: Source: ANY, Destination: xx.xx.94.18, UDP - Ports 1024 -> 65535 Out of interest I also tried opening port 80 to see if I could browse to the phone's admin web interface but no joy. I know that my ISP aren't blocking inbound service ports because I NAT Port Forwarded port 80 to one of my internal web servers and it rendered a test page I had set up. All the NAT settings are reset to factory defaults, i.e. there are no Port Redirection, DMZ Host, Open Ports or Address Mappings configured. The handset I'm using is a GrandStream GXP-2000. Is there anything else I should be doing?

  Read the article

• How to scope access to a service to set of users, using OpenLDAP, and only OUs

  - by JDS

  Okay, here goes. Solving this will solve several problems for me (as I can reapply this knowledge to several extant, similar problems), but luckily I have a very specific, concise problem to describe. Enough preamble. Our hosting partner is setting up VPN access for us and is connecting it to our LDAP server. They are using Cisco VPN, the docs on setting this up are here: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c3c45.shtml#maintask1 Specifically, note the screenshot in (5), under "ASDM" Now, I do NOT want to provide access to all of our users. I only want to provide access to our IT group. But I do not see a configuration option for LDAP groups on that web reference for the Cisco VPN. We are using: OpenLDAP 2.4 Static groups (i.e. "Group has the following members...") Single user OU, "ou=users,dc=mycompany,dc=com" Is it possible to provide an alias of some kind in OpenLDAP that creates another OU, "itusers", say, and lets me alias the members of that OU somehow? Something like: "cn=Jeff Silverman,ou=itusers,dc=mycompany,dc=com" is an alias for "cn=Jeff Silverman,ou=users,dc=mycompany,dc=com" And is NOT a separate, unique user account. Alternatively, should I just create a separate OU and manage it separately? It is a pain, but only 12-15 users will have to be managed that way, with two separate user accounts. But I hate this option - messy, unmanageable, unscalable. You know what I mean. I am open to any options. I've searched and read all over but I can't quite find an directly analagous example. I can't possibly be the only one who's had this problem! Thanks!

  Read the article

• Unable to connect to APNS with java-apns

  - by Mac

  I've got a Java program running on a firewalled server that is intended to send push notifications to my iPhone app by using java-apns. Problem is, whenever I try to send a notification the library fails to connect to the APNS server. From the stack trace, it seems that when creating the required SSL connection, the connection is being refused at some point (a java.net.ConnectException with a detail message of "connection refused" is being thrown when the library calls SSLSocketFactory's createSocket method). It would not surprise me at all if the firewall is blocking the connection, but unfortunately as I do not manage the server I am unable to verify that that is indeed the case. The fact that the program works fine from my (non-firewalled) desktop seems to support the theory. My question is, does anyone know of any method by which I can find the root cause of the problem, and/or can anyone tell me what I should tell the server admin to change to get things to work (if it is indeed the firewall that's the problem)? For reference, the server is a Linux box and I'm using version 0.1.2 of java-apns.

  Read the article

• Apache2 Virtual Host with ScriptAlias returning 403

  - by sissonb

  I am trying to reference my libs directory which is a sibling directory to my DocumentRoot. I am using the following ScriptAlias to try to accomplish this. ScriptAlias /libs/ "../libs" But when I go to example.com/libs/ I get a the following error Forbidden You don't have permission to access /libs/ on this server I am able to view the libs directory using the following configuration so I don't think it's a file permission error. <VirtualHost *> ServerName example.com ServerAlias www.example.com DocumentRoot C:/www/libs <VirtualHost *> More relevant httpd.cong setting below <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "C:/www"> Options Indexes FollowSymLinks AllowOverride None Order Deny,Allow Deny from none Allow from all </Directory> NameVirtualHost * <VirtualHost *> ServerName example.com ServerAlias www.example.com DocumentRoot C:/www/example ScriptAlias /libs/ "../libs" <Directory "C:/www/libs"> Options Indexes FollowSymLinks AllowOverride None Options +ExecCGI Order Deny,Allow Deny from none Allow from all </Directory> </VirtualHost>

  Read the article

• Have powershell zip the contents of a bunch of folders, individual zip for each folder

  - by WebDevHobo

  Recently, I asked how to do this with a .bat file and an answer was provided. for /D %%d in (*.*) do "C:\Program Files\7-Zip\7z\7za.exe" a -tzip %%d.zip %%d However, this proved useful only for folders that have no spaces in their name. The reason being that batch will do the following: if the folder name is "jef's vacation pics", the variables will be: %%d = jef's %%e = vacation %%f = pics And then it tries to pass only %%d to the 7-zip program, which will not find such a folder and therefor will not create a zip file. I've tried looking up some tutorials, documentation sites and such, but I haven't been able to come up with an answer. There may be an answer, but I want to take this opportunity to try my hand at powershell. I was thinking that a function with 1 argument, that being the parent-folder of the sub-folders that need to be zipped, would be the best approach. So here's what I have, which doesn't work, probably due to my general in-experience with powershell: function zipFolders($parent) { $zip = "C:\Program Files\7-Zip\7z\7za.exe"; $parents | ForEach-Object $zip a -tzip }

  Read the article

• How to remotely open gedit with SFTP URL in Gnome through SSH?

  - by Álvaro Justen

  My setup is weird and I can't change it now. I have two machines: local-machine: it's my desktop running Ubuntu with Gnome remote-machine: it's one virtual machine, also running Ubuntu but without X In both machines I have my private and public SSH keys. I need to run SSH from remote-machine to local-machine and run gedit (in local-machine, under the default $DISPLAY) but openning a file in remote-machine throught SFTP. Something like this: myuser@remote-machine:~$ ssh local-machine "DISPLAY=:0.0 gedit sftp://remote-machine/some/file" The command above doesn't work. gedit shows this message: Could not open the file sftp://remote-machine/some/file. gedit cannot handle sftp: locations. Note that: /some/file exists on remote-machine. I can SSH normally from remote-machine to local-machine using my SSH key without any problems! I can run the command DISPLAY=:0.0 gedit sftp://remote-machine/some/file in a terminal on local-machine and gedit opens the file on remote-machine without any problems - but the terminal in which I executed the command is running in DISPLAY :0 (really, it's gnome-terminal). I also tried -t option of SSH client (to force pseudo-tty allocation) but it didn't work. If I try to run DISPLAY=:0.0 gedit sftp://remote-machine/some/file in local-machine but under a tty (for example in tty1, by pressing <Ctrl>+<Alt>+<F1>) it doesn't not work - I get the same error when running from remote-machine. I found that if I pass the environment variable DBUS_SESSION_BUS_ADDRESS with a correct value, it works! So, if I do something like that: myuser@local-machine:~$ env | grep DBUS_SESSION_BUS_ADDRESS > env.txt myuser@local-machine:~$ scp env.txt remote-machine: and then: myuser@remote-machine:~$ ssh local-machine "DISPLAY=:0.0 $(cat env.txt) gedit sftp://remote-machine/some/file" it works! The problem is that I'm not on local-machine so I can't get the correct value for this env variable. Is there any other way to make this work?

  Read the article

• Exchange 2007 two node cluster setup on Windows 2008 Enterprise, install error

  - by Shadow00Caster

  I am installing Microsoft Exchange 2007 x64 in a two node environment using Microsoft Windows 2008 Enterprise x64. The Failover Cluster is all setup properly and following best practices for setting up the windows clustering for use with Exchange 2007. All the validation tests pass on the cluster and all of that portion is working fine. The problem is when I go to install the first Exchange node as an Active mailbox in configuration for a two node CCR. It gets all the way through the first 3 steps (Copy Exchange Files, Management Tools, Mailbox Role) and then fails on the 4th step 'Clustered Mailbox Server' with the following error: Error: The clustered mailbox server's group 'XXXX' was not found, and should already exist. Firewalls are all disabled, DNS is all setup properly, the environment has 3 domain controllers all 2k8 ent x64, all replication works. The name I pick for the CCR cluster (XXX) does not exist in AD or in DNS. I have attempted this install from both of the two Exchange nodes and multiple times .. tried with different names. I have been banging my head against the wall for days working on this and would appreciate any feedback on the issue.

  Read the article

• Unexpected behaviour when dynamically add node in HAproxy server

  - by Anand Soni

  I wanted to use HAProxy for my web app for load balancing purpose. I am trying to add a new rabbitmq node dynamically in HAProxy server using command : haproxy -p /var/run/haproxy.pid -sf $(cat /var/run/haproxy.pid). I am doing tcp connection mode with leastconn balance algorithm in load balancing. What is expected is when there is 3 connection in one rabbitmq, I add a new rabbit server in HAProxy server. so the next connection would pass to 2nd rabbitmq server which is not happening in my case. It distributes the connection in haphazardly manner. Here is my config file: defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 5000 srvtimeout 5000 listen rabbitmq 0.0.0.0:5672 mode tcp stats enable balance leastconn option tcplog server rabbit01 xx.xx.xx.xx:5672 check server rabbit02 xx.xx.xx.xx:5672 check listen tomcatq 0.0.0.0:80 mode http stats enable balance roundrobin stats refresh 10s stats refresh 10s stats uri /lb?stats stats auth admin:admin option httplog What is the problem causing this behavior? Any suggestion will appreciated.

  Read the article

• Error 720 on VPN (PPTP) attempt

  - by Andy Shulman

  When I attempt to connect to a server running XP x64 (so essentially Server 2003) using a PPTP connection, it fails with client-side error Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this configuration. and server-side error Event ID: 20050 The user WINSERV3\Andy connected to port VPN8-1 has been disconnected because no network protocols were successfully negotiated. I have configured the router to pass both TCP packets on 1723 and GRE packets. I have used Wireshark (filtering out ARP, UDP, and all TCP ports other than 1723) to observe the packets received by the server. Wireshark does not explicitly name any protocol GRE, but it does tell me the server sent and received TCP, PPTP, PPP LCP, PPP CHAP, PPP CBCP, and PPP IPCP. The connection seems to go wrong at packet 30, where the protocol is PPP LCP, with the payload of the packet being labeled "Protocol Reject". Obviously, this is going from server to client. This would seem to lead to the conclusion that there is something wrong with my client, which runs Windows 7 Ultimate x64. However, it is able to connect to my house's router, which runs the DD-WRT firmware and is thus a PPTP endpoint. I'm thoroughly at a loss. Please help!

  Read the article

• GNU screen, how to get current sessionname programmably

  - by Jimm Chen

  [ This can be considered step 2 of my previous question Is it possible to change GNU screen session name after created? ] Actually, I'd like to write a script that can display current screen session name and change current session name. For example: sren armcross It will change the session name to armcross (ARM gcc cross compiler) and output something like: screen session name changed from '25278.pts-15.linux-ic37' to 'armcross' So, the key question now is how to get current session name. Not only for display the old session name, but according to Is it possible to change GNU screen session name after created? , I have to know it(pass to -d -r) before I can change it to something else. Can we use $STY for current session name? No. $STY will not change after you have changed the session name to a user-defined one. However, for command screen -d -r <oldsessname> -X sessionname armcross should be the user-defined name(if ever defined) instead of $STY, otherwise, screen spouts error "No screen session found." Maybe, there is a verbose way, use screen -list to list all sessions(user-defined name listed), then, match the pid part from $STY against those listed sessions and we will find current session's user-defined name. It should not be so verbose for such a straightforward question. Don't you think so? The -d -D and -r -R options seems to expose too much implementation detail to screen's user. It seems, to rename a session, you have to detach it, then do the rename, then reattach it. Right? My env: opensuse 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06 Thank you.

  Read the article

• Advice needed: ADSL and VPN for a small company

  - by Saajid Ismail

  Hi. I need advice on purchasing an ADSL modem/router for a small company. At the moment, we are using the iBurst Wireless service for internet connectivity. I have the iBurst desktop modem, which connects to my Netgear WNR2000 router via ethernet. I am using the Netgear WNR2000 to deploy a wireless network as well. I have also set up a VPN using Windows Server 2003, and enabled the VPN Passthrough settings on the Netgear router. I am able to connect to the office network remotely without difficulty. However the problem that I've read is that the Netgear WNR2000 only supports VPN passthrough for a single session. This is simply not good enough. I need to be able to support at least 3 concurrent VPN connections immediately, and up to 5 in the near future. Now I am cancelling my iBurst Wireless service and have just got my ADSL line installed. I have to purchase an ADSL modem, and now is a good time to think of future proofing my investment. I need a good ADSL modem, that will allow me to support at least 5 concurrent VPN connections, or more, without breaking the bank. My budget is about 150-200 USD. I believe that my current Netgear WNR2000 router will be useless, except maybe to extend my wireless network in the future by a bit. Is there a solution where I can still use my Netgear WNR2000 for WiFi, for e.g., by connecting a cheaper non-WiFi ADSL modem to the Netgear router? If not, then which WiFi-enabled ADSL modem/router that supports at least 5 VPN passthroughs can you recommend? To sum it up, I need an ADSL modem/router that is: ADSL & ADSL2+ compatible has built-in 802.11n 270/300mbps WiFi (if having this feature doesn't push the price up too much) supports at least 5 VPN connections using VPN passthrough EDIT: Answer 2.10 in the following FAQ has me a bit worried - What is VPN/multiple VPN Pass-through?

  Read the article

• Multiple contacts with shared information

  - by Keith Thompson

  Background: I currently have several hundred contacts, synchronized between a Microsoft Exchange server and several mobile devices. I also save exported copies of the contacts in .vcf format. Is there a good way (application, file format, whatever) to maintain contacts with shared information? A very common scenario is that I have contacts for two or more people who live in the same house, for example: John Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-2222 Mobile: 555-555-3333 E-mail: [email protected] Jane Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-4444 Mobile: 555-555-5555 E-mail: [email protected] As you can see, both contacts have the same home address and phone number, but distinct names and work and mobile phone numbers. (Other information might also be either shared or distinct.) The applications and file formats I'm familiar with don't seem to have a good way to deal with this. If I use a single "John & Jane Doe" contact for both, it's difficult to distinguish the distinct information (if I want to call Jane's mobile phone rather than John's). If I use a separate contact for each, I have to remember to update both of them (or all of them for N 2) when they move or change their home phone number. An ideal solution would let me create a record containing information for their household, and have each of their contact records contain a reference to the household record, so that when I view John's contact record I see both shared and distinct information. Is there anything out there that has good support this kind of thing? (I would think there would be, since it's a very common scenario.) (I suppose I could roll my own system that generates merged .vcf files from some extended format, but that wouldn't play well with synchronizing across multiple devices.)

  Read the article

• Error when trying to deploy Windows XP SP3 with WDS

  - by Nic Young

  I have created a WDS server running Windows Server 2008 R2. I have built my custom images of Windows 7 using WAIK and MDT 2010 that are installed on the server. I used this guide to help me through the process. The Windows 7 images that I have created capture and deploy properly. I am attempting to follow the same steps from the guide I linked to capture and deploy a Windows XP SP3 image. I am able to sysprep and capture the reference machine with no errors. I am then able to import the custom .wim that I just captured in to MDT 2010 with no issues either. However when I try to deploy this image to a test virtual machine I get the following error: Deployment Error: I have made sure that the .iso that I am importing the source files from originally to create the sysprep and capture sequence is indeed a Windows XP SP3 iso. When I first select a PE boot environment before I deploy I select the x86 PE boot image that I created originally when making this for my Windows 7 deployments. Could this be the issue? If so how do I make a boot image specific for Windows XP SP3 deployments? I have Googled around for this error and some places point to the deployment image not being able to find setup.exe and other important system files for installing the operating system. If so, how do I add these to the image? Any ideas?

  Read the article

• Kerberos & signle-sign-on for website

  - by Dylan Klomparens

  I have a website running on a Linux computer using Apache. I've employed mod_auth_kerb for single-sign-on Kerberos authentication against a Windows Active Directory server. In order for Kerberos to work correctly, I've created a service account in Active Directory called dummy. I've generated a keytab for the Linux web server using ktpass.exe on the Windows AD server using this command: ktpass /out C:\krb5.keytab /princ HTTP/[email protected] /mapuser [email protected] /crypto RC4-HMAC-NT /ptype KRB5_NT_PRINCIPAL /pass xxxxxxxxx I can successfully get a ticket from the Linux web server using this command: kinit -k -t /path/to/keytab HTTP/[email protected] ... and view the ticket with klist. I have also configured my web server with these Kerberos properties: <Directory /> AuthType Kerberos AuthName "Example.com Kerberos domain" KrbMethodK5Passwd Off KrbAuthRealms EXAMPLE.COM KrbServiceName HTTP/[email protected] Krb5KeyTab /path/to/keytab Require valid-user SSLRequireSSL <Files wsgi.py> Order deny,allow Allow from all </Files> </Directory> However, when I attempt to log in to the website (from another Desktop with username 'Jeff') my Kerberos credentials are not automatically accepted by the web server. It should grant me access immediately after that, but it does not. The only information I get from the mod_auth_kerb logs is: kerb_authenticate_user entered with user (NULL) and auth_type Kerberos However, more information is revealed when I change the mod_auth_kerb setting KrbMethodK5Passwd to On: [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(1939): [client xxx.xxx.xxx.xxx] kerb_authenticate_user entered with user (NULL) and auth_type Kerberos [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(1031): [client xxx.xxx.xxx.xxx] Using HTTP/[email protected] as server principal for password verification [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(735): [client xxx.xxx.xxx.xxx] Trying to get TGT for user [email protected] [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(645): [client xxx.xxx.xxx.xxx] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Fri Oct 18 17:26:44 2013] [debug] src/mod_auth_kerb.c(1110): [client xxx.xxx.xxx.xxx] kerb_authenticate_user_krb5pwd ret=0 [email protected] authtype=Basic What am I missing? I've studied a lot of online tutorials and cannot find a reason why the Kerberos credentials are not allowing access.

  Read the article

< Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >