Search Results

Search found 18805 results on 753 pages for 'security center'.

Page 617/753 | < Previous Page | 613 614 615 616 617 618 619 620 621 622 623 624  | Next Page >

• Linux file server for an inexperienced admin

  - by Pat

  A charity I volunteer for wants a file server for their mostly Windows machines (about five XP and 7 machines, with some Mac laptops every now and then). For the server, I have a PC with an Intel Core 2 Duo 3GHz proc, 4GB of DDR2 400MHz RAM, and a 500 GB HDD. (I should point out that they do not currently have any server - they are just using Windows to share a folder on one of the PCs.) What is a linux distro that is easy to configure for Windows file serving yet stable and secure enough to protect sensitive data without an expert sysadmin? I'm guessing that a Debian distro would probably fit the security bill, but I don't know of any tailored to novice sysadmins. Also, are there any killer apps for making this easy to administer and set up (as a Windows file server, in particular - this answer is a good example)? Would FreeNAS be sufficient? Once it's all set up, what are the minimum measures I need to take to keep the data secure? I found this somewhat helpful answer, but it's not specific to my question of just getting a secure file server up, running, and maintained.

  Read the article

• NGINX returning 404 error on a valid url

  - by Harrison

  We have a site that runs PHP-FPM and NGINX. The application sends invitations to site members that are keyed with 40 character random strings (alphanumerics only -- example below). Today for the first time we ran into an issue with this approach. The following url: http://oursite.com/notices/response/approve/1960/OzH0pedV3rJhefFlMezDuoOQSomlUVdhJUliAhjS is returning a 404 error. This url format has been working for 6 months now without an issue, and other urls following this exact format continue to resolve properly. We have a very basic config with a simple redirect to a front controller, and everything else has been running fine for a while now. Also, if we change the last character from an "S" to anything other than a lower-case "s", no 404 error and the site handles the request properly, so I'm wondering if there's some security module that might see something wrong with this specific string... Not sure if that makes any sense. We are not sure where to look to find out what specifically is causing the issue, so any direction would be greatly appreciated. Thanks! Update: Adding a slash to the end of the url allowed it to be handled properly... Would still like to get to the bottom of the issue though. Solved: The problem was caused by part of my configuration... Realized I should have posted, but was headed out of town and didn't have a chance. Any url that ended in say "css" or "js" and not necessarily preceded by a dot (so, for example, http://site.com/response/somerandomestringcss ) was interpreted as a request for a file and the request was not routed through the front controller. The problem was my regex for disabling logging and setting expiration headers on jpgs, gifs, icos, etc. I replaced this: location ~* ^.+(jpg|jpeg|gif|css|png|js|ico)$ { with this: location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { And now urls ending in css, js, png, etc, are properly routed through the front controller. Hopefully that helps someone else out.

  Read the article

• Can I restore one of my user's profiles in Vista?

  - by Rod

  My youngest daughter uses my 4 year old laptop, which has Windows Vista installed. Somehow she got some Trojan (Vista Internet Security). (I'd love to know how that happened, seeing as how she is a standard user, and I have VIPRE as my AV.) Anyway, I ran a deep anti-virus scan using VIPRE, which identified it. I decided to delete everything that it identified. Now she cannot use anything in her profile. If she tries to bring up the browser, it recycles over and over again a dialog box asking which program to use. If I try to run any program at all, it doesn't know what to do. For example, it is totally lost trying to run the command line. If I bring up Windows Explorer and navigate to Windows\System32 and try to run the command line, or anything at all from there, it goes "Huh?" What in heck has happened?? Is it possible to fix this, and if so, how? As an aside, I can log into my account (my account on that machine is an administrator) and it works fine.

  Read the article

• How to find the source of a cryptic event viewer log

  - by mlsteeves

  I'm looking at the eventviewer logs, and I see a bunch Error entries in the Application log. (Windows Server 2008 R1). There is an error written to the logs about every 4 seconds. I need to find out which application is causing these events, is there anyway to find this out? Here is what each look like: Error 12/2/2010 12:00:09 PM Application 0 None The details for each error: Log Name: Application Source: Application Date: 12/2/2010 12:00:09 PM Event ID: 0 Task Category: None Level: Error Keywords: Classic User: N/A Computer: computer.domain Description: The description for Event ID 0 from source Application cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: the message resource is present but the message is not found in the string/message table Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application" /> <EventID Qualifiers="0">0</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-12-02T20:00:09.000Z" /> <EventRecordID>237167</EventRecordID> <Channel>Application</Channel> <Computer>computer.domain</Computer> <Security /> </System> <EventData> <Binary>534F434B...</Binary> </EventData> </Event>

  Read the article

• NGINX returning 404 error on a valid url

  - by Harrison

  We have a site that runs PHP-FPM and NGINX. The application sends invitations to site members that are keyed with 40 character random strings (alphanumerics only -- example below). Today for the first time we ran into an issue with this approach. The following url: http://oursite.com/notices/response/approve/1960/OzH0pedV3rJhefFlMezDuoOQSomlUVdhJUliAhjS is returning a 404 error. This url format has been working for 6 months now without an issue, and other urls following this exact format continue to resolve properly. We have a very basic config with a simple redirect to a front controller, and everything else has been running fine for a while now. Also, if we change the last character from an "S" to anything other than a lower-case "s", no 404 error and the site handles the request properly, so I'm wondering if there's some security module that might see something wrong with this specific string... Not sure if that makes any sense. We are not sure where to look to find out what specifically is causing the issue, so any direction would be greatly appreciated. Thanks! Update: Adding a slash to the end of the url allowed it to be handled properly... Would still like to get to the bottom of the issue though. Solved: The problem was caused by part of my configuration... Realized I should have posted, but was headed out of town and didn't have a chance. Any url that ended in say "css" or "js" and not necessarily preceded by a dot (so, for example, http://site.com/response/somerandomestringcss ) was interpreted as a request for a file and the request was not routed through the front controller. The problem was my regex for disabling logging and setting expiration headers on jpgs, gifs, icos, etc. I replaced this: location ~* ^.+(jpg|jpeg|gif|css|png|js|ico)$ { with this: location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { And now urls ending in css, js, png, etc, are properly routed through the front controller. Hopefully that helps someone else out.

  Read the article

• PHP application failed to connect after a network plugged back in

  - by tntu

  My data-center appears to have had some issues with their network and thus my server has suffered from on an off network connectivity for about an hour. After the connection has been completely re-established my code still kept reporting the same issue over and over until I have restarted the service. The code is a simple PHP code that loops forever checking the Apple feed-back server and then sleeps for a few minutes and then it begins all over again. Now I understand the error being generated if the network is down but once it got back up why did it continue until I have restarted the code? Does PHP have something that needs to be re-initialized or something?? Messges log: Dec 20 08:57:22 server kernel: r8169: eth0: link down Dec 20 08:57:28 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:29 server kernel: r8169: eth0: link down Dec 20 08:57:33 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:33 server kernel: r8169: eth0: link down Dec 20 08:57:37 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:38 server kernel: r8169: eth0: link down Dec 20 08:57:44 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:44 server kernel: r8169: eth0: link down Dec 20 08:57:52 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:52 server kernel: r8169: eth0: link down Dec 20 09:10:58 server kernel: r8169 0000:06:00.0: eth0: link up PHP Error: PHP Warning: stream_socket_client(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /home/push/feedback.php on line 36 Code Line 36: $apns = stream_socket_client('ssl://feedback.sandbox.push.apple.com:2196', $errcode, $errstr, 60, STREAM_CLIENT_CONNECT, $stream_context);

  Read the article

• 3 Monitor PCI-e Graphics card on Linux (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

  Read the article

• windows: force user to use specific network adapter

  - by Chad

  I'm looking for a configuration/hack to force a particular application or all traffic from a particular user to use a specific NIC. I have an legacy client/server app that has a "security feature" that limits connections based on IP address. I'm trying to find a way to migrate this app to a terminal server environment. The simple solution is for the development team to update the code in the application, however in this case that's not an option. I was thinking I might be able to install VMware NIC's installed for each user on the terminal server and do some type of scripting to force that user account to use a specific NIC. Anybody have any ideas on this? EDIT 1: I think I have a hack to work around my specific problem, however I'd love to hear of a more elegant solution. I got lucky in that the software reads the server IP address out of a config file. So I'm going to have to make a config file for each user and make a customer programs files for each user. Then add a VMware NIC for each user and make each server IP address reside on a different subnet. That will force the traffic for a particular user to a particular IP address, however its really messy and all the VM NIC's will slow down the terminal server. I'll setup a proof of concept Monday and let the group know how it affects performance.

  Read the article

• Managed LAMP platform for maximizing availability and global reach, not scalability

  - by user66819

  Assume a Linux/Apache/MySQL/PHP application for a small base of registered users. With small userbase, there are no traffic peaks so the scalability that cloud platforms offer is not imperative. But the system is mission-critical, so availability is the primary goal. Users are also distributed across Asia, Europe, and US, so multiple server locations that minimize users' network hops would be highly desirable. The dream: a managed VPS platform where we would configure a single server (uploading PHP and other files, manipulating database, etc.), and the platform would automatically mirror the server in a handful of key places around the world (say one on each US coast, one in Europe, one in east Asia). File system synchronization and MySQL replication would happen automatically. Core operating system is managed, so we don't need to do full system administration and security, and low-level backups are also done by service provider, though we also do our own backups as well. Couple this with some sort of DNS geo-detection, so users are routed to the nearest operational server... with support for https, of course. Does such a dream exist? If not, what are some approaches to accomplish the same end with minimal time investment and minimal monthly hosting costs?

  Read the article

• Hyper-v and sql server connections for web apps

  - by Rick Ratayczak

  I have a physical machine running win8, and two VMs in hyper-v client: 1 web server, 1 sql server. The web server works fantastic. The sql is the one that is giving me the problem. I can connect to it with server explorer in visual studio or management studio just fine, and it's blazing fast. The problem happens when I use the same connection string I am using in visual studio server explorer in the web.config for an app. data source=VMSQL1;initial catalog=OtherShell;persist security info=True;user id=OtherShell;password=****;network library=dbmssocn;MultipleActiveResultSets=True;App=EntityFramework I made sure it was also using tcp-ip, but it doesn't connect with or without the network library part of the connection string. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) This is driving my batty for the last two days, any ideas? It fails from the web vm too, but works in management studio with the same connection string.

  Read the article

• UIDs for service users in Mac OS X

  - by LaC

  Some third-party servers should be run under a special user for security reasons (eg, PostgreSQL is typically run by "postgres"). Of course, these service users should not show up in the Mac OS X login windows. I know how to create hidden users using dscl or dsimport, but I'm wondering what the best policy is for assigning UIDs (and matching GIDs). Apple's documentation states that UIDs from 0 to 100 are reserved (pg. 69), but OS X comes with several special users and groups outside that range. I used to use ids from 401 onwards for services, but I noticed that OS X 10.6 has started using that range for groups created by the Sharing pane in System Preferences. What is the recommended ID range to use for third-party services, then? Perhaps I should just use IDs in the 500 range, since all that is needed to hide a user in Snow Leopard is setting his password to "*"? Also, most of Apple's services have names starting with an underscore, with an alias sans underscore; eg, _sandbox and sandbox. Is there any special significance to this? Should I do the same for my services?

  Read the article

• How can I inject clips [ads] in a playlist every x minutes (even if previous clip is not over)

  - by azera

  Sorry for the title, I find it quite hard to describe what I want to do in a single sentence We have a few TV here linked to our computer, which we use to display clips about what we do in our sport center, what you should do to stay in good form ect ... It's running non stop, actually though vlc + playlist. Those main clips are 1-2 hours long and we have about 20 of them looping randomly all day. We would like to inject ads for some of our sponsiored products every now and then during the playlist, like say one ad every 15 minute. Does any one know how we can do that, while keeping the main clip random order ? I thought about encoding the whole thing as a single movie with ads inserted, but then it's not random. So we can put the ads in the playlist itself right ? Except clips are several hours long and we want that more often than that. Cutting the main clips in several pieces seems to work but that kind of sucks as new clips are made every month. If any one has an idea, thanks a lot

  Read the article

• VPN service into 192 network

  - by tophersmith116

  I'm thinking about setting up a security testing lab. I work on a switched network, and that just makes for unnecessary headaches when doing testing. I'd like to create a 192 network with a few machines inside for DBs and AppServers etc. I will need a pivot machine that connects to both the outer network and the 192 (for automation purposes). But I'd like to be able to connect into the 192 network with my own machine from the outer network as the "attacking" machine (rather than have dedicated attack machines inside the 192 network). Therefore, I'd like to have the pivot server be a VPN server as well, so that my machine can VPN into the 192 network from the outer network. First off, is this even possible? Can I have a single computer with two NICs where a VPN service allows remote connections into the 192? Secondly, I'd like to have multiple outer clients connect to the VPN. Does anyone have any suggestions? I've used Hamachi well before, but I've also seen some good stuff from OpenVPN.

  Read the article

• High availability virtual machines

  - by Jeremy

  I've been reading a lot about high availability virtualization, either via Hyper-V or VMWare. In that context, essentially high availabliity means that the VM is hosted by a closter of physical servers (nodes), so if one of the physical servers goes down, the VM can still be served by other physical servers. So far so good, the physical cluster and the VM itself are highly available. However if the service being provided, let's say SQL server, MSDTC, or any other service, are actually being provided by the VM image and the virtualized operating system. So I imagine that there is still a point of failure at the virtual layer that isn't accounted for. Something could happen within the virtual machine itself that the physican cluster can not account for, correct? In that instance the physican failover cluster (Hyper-V) or VMWare host, can not fail over, because the issue is not with one of the servers in the physical cluster - failing over a physical node would not do any good. Does this necessitate building a virtual failover cluster on top of the physical one, or is this not necessary? Alternatively, I suppose you could skip the phsyical clustering, and just cluster at the virtual layer (Child based failover clustering), because that should still survive a physical failure. See image below showing parent based (left), child based (right) and a combination (center). Is parent based as far as you need to go, or is child based more appropriate?

  Read the article

• How do i play nicely with MS SQL/SQL Server 2008

  - by acidzombie24

  Big problem. I have nearly given up. I am trying to port my prototype to use MS SQL so it will work on a server once i get it (the server will be SQL Server 2008, shared, i dont know any more info). So i tried to connect to SQL Server via visual studios IDE and had no luck. I enabled TCP and named pipes and restarted the service (and computer) with still no luck. I remembered about mdf files so i made that after an obstacle of not being able to make the connect string require i figure out visual studio has it in its properties and successfully connected with that. Then i had a problem with nested transactions. After not being able to figure out how to check i wondered if i can configure it to allow it somehow. I always thought all of MS were the same except for limitations but sql server seems to support nested transactions so theres no point trying to work around the problem with .mdf files since i wont need them and really just used it to port the base of my sql code and to check if syntax is correct. I tried installing SQL Server Management Studio since people mentioned it several times (as a solution or at least help). When installing it on windows 7 it says it may not be compatible. After running it, it launched SQL Server Installation Center (64-bit) which doesnt seem to be the same thing as i dont see a way to modify any of my server (networking) configurations or edit user permissions, etc. I am clueless what to do next. Does anyone have any ideas? I'm posting here bc i think my problem is more configurations and sql server then programming.

  Read the article

• Need help trying to allow my remote PowerShell script to run on my Windows 2008 r2 Server

  - by Pure.Krome

  I've got a Windows 2008 r2 server with Sql Server 2008 r2 installed. I've got a Sql Server Agent which tries to run a Powershell job, but fails :- Message Executed as user: FooServer\SqlServerUser. A job step received an error at line 1 in a PowerShell script. The corresponding line is '& '\\polanski\Backups\Database\7ZipFooDatabases.ps1'' Correct the script and reschedule the job. The error information returned by PowerShell is: 'File \\polanski\Backups\Database\7ZipFooDatabases.ps1 cannot be loaded. The file \\polanski\Backups\Database\7ZipFooDatabases.ps1 is not digitally signed. The script will not execute on the system. Please see "get-help about_signing" for more details.. '. Process Exit Code -1. The step failed. Ok. So i run Powershell on that server then set the execution policy to unrestricted. To check .. PS C:\Users\theUser> Get-ExecutionPolicy Unrestricted PS C:\Users\theUser> Kewl :) but it still doesn't work :( Ok ... what happens when i try to run the powershell from the command line.... PS C:\Users\justin.adler . '\polanski\Backups\Database\7ZipMotorshoutDatabases.ps1' Security Warning Run only scripts that you trust. While scripts from the Internet can be useful, this script can potentially harm your computer. Do you want to run \\polanski\Backups\Database\7ZipFooDatabases.ps1? [D] Do not run [R] Run once [S] Suspend [?] Help (default is "D"): er..... didn't I already tell the server that ANY file can be ran? Notice the file is located at... \\polanski\Backups\Database\ So can someone make any suggestions?

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks.

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• Linux as a router for public networks

  - by nixnotwin

  My ISP had given me a /30 network. Later, when I wanted more public ips, I requested for a /29 network. I was told to keep using my earlier /30 network on the interface which is facing ISP, and the newly given /29 network should be used on the other interface which connects to my NAT router and servers. This is what I got from the isp: WAN IP: 179.xxx.4.128/30 CUSTOMER IP : 179.xxx.4.130 ISP GATEWAY IP:179.xxx.4.129 SUBNET : 255.255.255.252 LAN IPS: 179.xxx.139.224/29 GATEWAY IP :179.xxx.139.225 SUBNET : 255.255.255.248 I have a Ubuntu pc which has two interfaces. So I am planning to do the following: eth0 will be given 179.xxx.4.130/30 gateway 179.xxx.4.129 eth1 will be given 179.xxx.139.225/29 And I will have the following in the /etc/sysctl.conf: net.ipv4.ip_forward=1 These will be iptables rules: iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT My clients which have the ips 179.xxx.139.226/29 and 179.xxx.139.227/29 will be made to use 179.xxx.139.225/29 as gateway. Will this configuration work for me? Any comments? If it works, what iptables rules can I use to have a bit of security? P.S. Both networks are non-private and there is no NATing.

  Read the article

• sudoer scheme to allow useful access to another web developer yet retain future control of a virtual

  - by Tchalvak

  Background: Virtual Private Server I have a virtual private server that I'm looking to host multiple websites on, and provide access to another web developer. I don't care about putting too many constraints on him, though I wouldn't mind isolating the site that he'll be developing from other sites on the server that I will develop. The problem: retain control Mainly what I want is to make sure that I retain control over the server in the future. I want to reserve the ability to create/promote/demote and other administrative functions that don't deal with web software. If I make him an admin, he can sudo su - and become root and remove root control from me, for example. I need him not to be able to: take away other admin permissions change the root password have control over other security/administrative functions I would like him to still be able to: install software (through apt-get) restart apache access mysql configure mysql/apache reboot edit web development configuration type files in /etc/ Other Standard Setups would be happily considered I've never really set up a good sudoers file, so simple example setups would be very useful, even if they're only somewhat similar to the settings that I'm hoping for above. Edit: I have not yet finalized permissions, so standard, useful sudo setups are certainly an option, the lists above are more what I'm hoping I can do, I don't know that that setup can be done. I'm sure that people have solved this type of problem before somehow, though, and I'd like to go with something somewhat tested as opposed to something I've homegrown.

  Read the article

• IIS 6 Denies access to the default document

  - by Jim

  I've got Windows Server 2k3 with IIS6 hosting a couple ASP.NET MVC 2 applications (.NET 4), all in the Default Web Site. Most of them simply use Integrated authentication, but a couple use forms as well. All the applications work properly and are correctly accessible. The problem I'm trying to resolve is access to the default document. It is currently specified as index.htm. Both index.htm and the Default Web Site are configured to allow anonymous access (with none of the authenticated acces boxes checked). However, access is denied to the file. Accessing via server.domain.tld/ and server.domain.tld/index.htm both yield 401 errors. However, server.domain.tld/default.htm (file does not exist) properly returns a 404. If I alter the file security on index.htm to allow integrated authentication, then requesting /index.htm directly works properly for users with domain accounts, but anonymous users get a login prompt/401. How can I configure IIS to allow all users to view index.htm via server.domain.tld/?

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• NAT via iptables and virtual interface

  - by Alex

  I'm trying to implement the following scenario: One VM-host, multiple guest VMs, each one gets its own IP-address (and domain). Our server has only one physical interface, so the intended use is to add virtual interfaces on eth0. To complicate our situation the provider uses port-security on their switches, so I can't run the guest interfaces in bridged mode, because then the switch detects a "spoofed" MAC-address and kills the interface (permanently, forcing me to call the support, which I'm sure will get them a little bit angry the third time ;) ). My first guess was to use iptables and NAT to forward all packages from one virtual interface to another one, but iptables doesn't seem to like virtual interfaces (at least I can't get it to work properly). So my second guess is to use the source IP of the packages to the public interface. Let's assume libvirt creates a virbr0-network with 192.168.100.0/24 and the guest uses 192.168.100.2 as IP-address. This is what I tried to use: iptables -t nat -I PREROUTING --src public_ip_on_eth0:0 -p tcp --dport 80 -j DNAT --to-destination 192.168.100.2:80 That doesn't give me the intended results either (accessing the server times out). Is there a way to do what I'm trying to do, or even to route all traffic to a certain IP on a virtual interface to the VM's device?

  Read the article

• How do I activate the F_LINE input in a transplanted HP chassis?

  - by admin

  I have an HP Pavilion Media Center PC chassis, vintage 2003 or so and I replaced the motherboard in it with a newer (vintage 2009) HP motherboard, M2N68-LA (Narra 5). I have scoured the internet trying to find pinouts for the motherboard to no avail. My question concerns the front panel audio, specifically Line In. The old chassis was built for AC97 but the new mobo is build for the newer HD audio standard. I figured out by comparison & experimentally how to connect the Mic & Headphone jacks to the HD audio header of the mobo by adding a manual switch to set the SENSE lines. Now all works fine for Mic & headphone. The old chassis also has a front panel Line In jack that the newer HP chassis does not have. However, the new mobo has a 4 pin white connector labeled F_LINE that I believe is a line input. Under Windows 7 I see the two Line Inputs in the mixer but I can't get one of them to become active. The 4 pin F_LINE connector uses the two middle pins for ground, and presumably the other two for left and right audio inputs. There are no pins for sensing on that connector. Can anyone tell me how to use that F_LINE input for the front panel, or how to activate it?

  Read the article

• Postgresql Data Aggregation over WAN Securely

  - by Zach

  Hey guys, Need some advice on how to proceed with this situation: My current scenario is that I have several postgresql (50+) boxes deployed throughout various locations and data centers and a beefy postgresql box setup at a homebase location. All of the deployed boxes have identical database layouts. I'm looking for a solution that would allow for a few things. I realize some of these options overlap and some might only contain mutually exclusive solutions. However, I'm interested to hear your thoughts :) Remotely query the deployed boxes and pull the results back to the homebase box for processing. Nightly (remote) "sync" or dump the deployed boxes' databases to a master database on the homebase box. Remotely push a table entry to all of the deployed boxes from the homebase box. Ensure security of data in transit, and remotely deployed boxes. Up to this point I've been floating on a homebrew multithreaded python/perl system that SSH's into these boxes remotely, which are ACL'ed off to the homebase server and pulls (or pushes) the raw query results over the ssh connection. I have even touched #2 (remote syncing) as I know that would get nasty really quick. I'm interested in any ideas for a more elegant solution that can scale up and stick to my FreeBSD/Linux environment.

  Read the article

• Using Truecrypt to secure mySQL database, any pitfalls?

  - by Saul

  The objective is to secure my database data from server theft, i.e. the server is at a business office location with normal premises lock and burglar alarm, but because the data is personal healthcare data I want to ensure that if the server was stolen the data would be unavailable as encrypted. I'm exploring installing mySQL on a mounted Truecrypt encrypted volume. It all works fine, and when I power off, or just cruelly pull the plug the encrypted drive disappears. This seems a load easier than encrypting data to the database, and I understand that if there is a security hole in the web app , or a user gets physical access to a plugged in server the data is compromised, but as a sanity check , is there any good reason not to do this? @James I'm thinking in a theft scenario, its not going to be powered down nicely and so is likely to crash any DB transactions running. But then if someone steals the server I'm going to need to rely on my off site backup anyway. @tomjedrz, its kind of all sensitive, individual personal and address details linked to medical referrals/records. Would be as bad in our field as losing credit card data, but means that almost everything in the database would need encryption... so figured better to run the whole DB in an encrypted partition. If encrypt data in the tables there's got to be a key somewhere on the server I'm presuming, which seems more of a risk if the box walks. At the moment the app is configured to drop a dump of data (weekly full and then deltas only hourly using rdiff) into a directory also on the Truecrypt disk. I have an off site box running WS_FTP Pro scheduled to connect by FTPs and synch down the backup, again into a Truecrypt mounted partition.

  Read the article

< Previous Page | 613 614 615 616 617 618 619 620 621 622 623 624  | Next Page >