Search Results

Search found 20933 results on 838 pages for 'jeff post'.

Page 619/838 | < Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >

• Improving abysmal 802.11n wireless network

  - by concept

  I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

  Read the article

• Perl EPIC Not recognising installed CPAN modules

  - by Recc

  Eclipse on a mac, was working fine adding new modules until I Installed Text::CSV_XS which Eclips doesn't recognise as added to @INC For instance use strict; use SOAP::Transport::HTTP; SOAP::Transport::HTTP::CGI->dispatch_to('C2FService')->handle; BEGIN { package C2FService; use vars qw(@ISA); @ISA = qw(Exporter SOAP::Server::Parameters); use SOAP::Lite; sub c2f { my $self = shift; my $envelope = pop; my $temp = $envelope->dataof("//c2f/temperature"); return SOAP::Data->name( 'convertedTemp' => ( ( ( 9 / 5 ) * ( $temp->value ) ) + 32 ) ); } } use SOAP::Transport::HTTP; is marked as error if I comment it out use SOAP::Lite; is in turn marked as an error, not found etc the usual if a module is not installed. Both are installed with CPAN and $ perl -c soap-test.pl post-code-check.pl syntax OK Perl is fine CPAN tests are all pass, the code works, only EPIC lags behind. $ pwd && ls /opt/local/lib/perl5/site_perl/5.12.4/SOAP Client.pod Lite Server.pod Constants.pm Lite.pm Test.pm Data.pod Packager.pm Trace.pod Deserializer.pod SOM.pod Transport Fault.pod Schema.pod Transport.pod Header.pod Serializer.pod Utils.pod And if I have use errors in the start of my files the rest of the source is not error checked..

  Read the article

• Code won't work under mono, any ideas whats wrong?

  - by JL

  Mono won't fire the following code: I get internal server error 500, error writing request error. Code works perfectly under normal .net.... any ideas why its broken and how to fix it? [WebServiceBinding] public class testService : System.Web.Services.Protocols.SoapHttpClientProtocol { private string DummySoapRequest = @"<?xml version=""1.0"" encoding=""utf-8""?> <soap:Envelope xmlns:soap=""http://schemas.xmlsoap.org/soap/envelope/"" xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema""> <soap:Body> <DummyOperation xmlns=""http://mynamespace.com""> </DummyOperation> </soap:Body> </soap:Envelope>"; public void SendDummyRequest() { System.Net.WebRequest req = GetWebRequest(new Uri(Url)); req.Headers.Add("SOAPAction", ""); req.ContentType = "text/xml;charset=\"utf-8\""; req.Method = "POST"; using (Stream stm = req.GetRequestStream()) { using (StreamWriter stmw = new StreamWriter(stm)) { stmw.Write(DummySoapRequest); } } System.Net.WebResponse response = req.GetResponse(); } }

  Read the article

• BizTalk configuration broken following WCF hotfix installation

  - by Sir Crispalot

  I usually post over on StackOverflow, but thought this was probably better suited to ServerFault. Please migrate if I'm wrong! I am developing a WCF service and a BizTalk application on my workstation at the moment. As part of the WCF service, I had to install hotfix 971493 from Microsoft which updates some core WCF assemblies. Following installation of that hotfix, I am now experiencing severe issues in my existing BizTalk application. When I attempt to configure the properties of an existing WCF-Custom receive location, I get this error: Error loading properties (System.IO.FileLoadException) The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) If I click OK (the same error repeats four times) I eventually see the WCF-Custom properties dialog. However if I click on the various tabs, I continue to receive errors: The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) (Microsoft.BizTalk.Adapter.Wcf.Admin) The WCF-Custom receive location was working yesterday, and I installed the hotfix this morning. I'm guessing these two are related, and that BizTalk somehow has a reference to the old WCF assemblies. Does anyone know how I can fix this?

  Read the article

• Subversion all or nothing access to repo tree

  - by Glader

  I'm having some problems setting up access to my Subversion repositories on a Linux server. The problem is that I can only seem to get an all-or-nothing structure going. Either everyone gets read access to everything or noone gets read or write access to anything. The setup: SVN repos are located in /www/svn/repoA,repoB,repoC... Repositories are served by Apache, with Locations defined in etc/httpd/conf.d/subversion.conf as: <Location /svn/repoA> DAV svn SVNPath /var/www/svn/repoA AuthType Basic AuthName "svn repo" AuthUserFile /var/www/svn/svn-auth.conf AuthzSVNAccessFile /var/www/svn/svn-access.conf Require valid-user </Location> <Location /svn/repoB> DAV svn SVNPath /var/www/svn/repoB AuthType Basic AuthName "svn repo" AuthUserFile /var/www/svn/svn-auth.conf AuthzSVNAccessFile /var/www/svn/svn-access.conf Require valid-user </Location> ... svn-access.conf is set up as: [/] * = [/repoA] * = userA = rw [/repoB] * = userB = rw But checking out URL/svn/repoA as userA results in Access Forbidded. Changing it to [/] * = userA = r [/repoA] * = userA = rw [/repoB] * = userB = rw gives userA read access to ALL repositories (including repoB) but only read access to repoA! so in order for userA to get read-write access to repoB i need to add [/] userA = rw which is mental. I also tried changing Require valid-user to Require user userA for repoA in subversion.conf, but that only gave me read access to it. I need a way to default deny everyone access to every repository, giving read/write access only when explicitly defined. Can anyone tell me what I'm doing wrong here? I have spent a couple of hours testing and googling but come up empty, so now I'm doing the post of shame.

  Read the article

• Problems starting autossh on boot [ubuntu]

  - by Ken

  I'm trying to automatically start an SSH tunnel to my server on boot from a ubuntu box. I have an ubuntu box that's mounted on an 18-wheeler and is networked behind an air card. The box hosts a mysql database that i'm trying to have replicated when the aircard is connected. As I can never be sure of my IP and how many or which routers I'm behind I'm connected to my replication server with an SSH tunnel. I got that working using the following command: ssh -R 3307:localhost:3307 [email protected] Now I'd like that to start whenever the box is, and be alive all the time, so I installed auto-ssh and setup this little script: ID=xkenneth HOST=erdosmiller.com AUTOSSH_POLL=15 AUTOSSH_PORT=20000 AUTOSSH_GATETIME=30 AUTOSSH_DEBUG=yes AUTOSSH_PATH=/usr/bin/ssh export AUTOSSH_POLL AUTOSSH_DEBUG AUTOSSH_PATH AUTOSSH_GATETIME AUTOSSH_PORT autossh -2 -fN -M 20000 -R 3307:localhost:3306 ${ID}@${HOST} I've tried putting this scrip in /etc/init.d/ and using a post-up command in /etc/network/interfaces as well as putting it in /etc/network/if-up.d/. In both situations the script starts on boot, but the tunnel doesn't appear to be correctly established. The script works when run manually.

  Read the article

• hadoop: port appears open locally but not remotelly

  - by miguel

  I am new to linux and hadoop and I am having the same issue as in this question. I think I understand what is causing it but I don't know how to solve it (Don't know what they mean by "Edit the Hadoop server's configuration file so that it includes its NIC's address."). The other post that they link says that the configuration files should refer to the machine's externally accessible host name. I think I got this right as every hadoop configuration file refers to "master" and the etc/hosts file lists the master by its private IP address. How can I solve this? Edit: I have 5 nodes: master, slavec, slaved, slavee and slavef all running debian. This is the hosts file in master: 127.0.0.1 master 10.0.1.201 slavec 10.0.1.202 slaved 10.0.1.203 slavee 10.0.1.204 slavef this is the hosts file in slavec (it looks similar in the other slaves): 10.0.1.200 master 127.0.0.1 slavec 10.0.1.202 slaved 10.0.1.203 slavee 10.0.1.204 slavef the masters file in master: master the slaves file in master: master slavec slaved slavee slavef the masters and slaves file in slavex has only one line: slavex

  Read the article

• Computer won't boot from a bootable DVD

  - by JohnB

  My friend gave me his old computer that used to have WinXP on it. I'm trying to load Win7 on it and I thought there was something wrong because it wouldn't boot off a bootable disc, even though I setup the BIOS boot settings properly (I've done this sort of thing a million times). However, this closely related post helped me realize that I can boot off a bootable CD (WinXP), just not a DVD (Win7) Computer won’t boot from CD/DVD drive That might be the answer to my question, however, this motherboard is still pretty current technology. It's a good quality Gigabyte board, and judging from this product page, it came out in 2004. If I can't figure out a solution to my DVD boot problem, I'll have to try something like this: Boot and Install Windows from a USB thumb drive I guess it's possible that this motherboard doesn't allow booting from a DVD, but I still think that I might be missing something. It wouldn't be the DVD rom drive would it? I did try another drive and had the same results. However, I didn't try booting a DVD in the computer that the other test drive came out of, I'll do that later today. Any other advice? Thanks.

  Read the article

• Virtual Lan on the Cloud -- Help Confirm my understanding?

  - by marfarma

  [Note: Tried to post this over at ServerFault, but I don't have enough 'points' for more than one link. Powers that be, move this question over there.] Please give this a quick read and let me know if I'm missing something before I start trying to make this work. I'm not a systems admin professional, and I'd hate to end up banging my head into the wall if I can avoid it. Goals: Create a 'road-warrior' capable star shaped virtual LAN for consultants who spend the majority of their time on client sites, and who's firm has no physical network or servers. Enable CIFS access to a cloud-server based installation of Alfresco Allow Eventual implementation of some form of single-sign-on ( OpenLDAP server ) access to Alfresco and other server applications implemented in the future Given: All Servers will live in the public internet cloud (Rackspace Cloud Servers) OpenVPN Server will be a Linux disto, probably Ubuntu 9.x, installed on same server as Alfresco (at least to start) Staff will access server applications and resources from client sites, hotels, trains, planes, coffee shops or their homes over various ISP, using their company laptops or personal home desktops. Based on my Research thus far, to accomplish this, I'll need: OpenVPN with Bridging Enabled to create a star shaped "virtual" LAN http://openvpn.net/index.php/open-source/documentation/miscellaneous/76-ethernet-bridging.html A Road Warrior Network Configuration, as described in this Shorewall article (lower down the page) http://www.shorewall.net/OPENVPN.html Configure bridge addressesing (probably DHCP) http://openvpn.net/index.php/open-source/faq.html#bridge-addressing Configure CIFS / Samba to accept VPN IP address http://serverfault.com/questions/137933/howto-access-samba-share-over-vpn-tunnel Set up Client software, with keys configured for access (potentially through a OpenVPN-Sa client portal) http://www.openvpn.net/index.php/access-server/download-openvpn-as/221-installation-overview.html

  Read the article

• Webserver optimization

  - by f-aminov

  Hi guys! I have a website hosted on a VPS (512Mb - minimum guranteed memory, 510Mhz proccessor, Debian 5.0 Lenny, Apache 2.2.9 with nginx 0.7.65 as a frontend to serve static content, MySQL 5.1.44, PHP 5.3.2 with APC caching). I'm a web developer, so I'm not very good at optimizing servers, but I've managed to install and setup all those neccessary components (LAMP, nginx, etc.). After that I decided to stress test my website (which uses Drupal 6.16 with caching and all possible optimization enabled) using a utility called "Webserver Stress Tool 7". And it seems to me that the results aren't any good - here is a graph (sorry, as a new user I'm not allowed to post images) As you can see the response time depending on amount of simultaneous users increases very quickly. With 10 simultaneous users the time is about 1000ms, with 100 simultaneous users it's about 15000ms (15s!). The question is do you think this is normal behavior for such a server or something is wrong with the settings and optimization? If you think something is wrong what particulary could be wrong? Any other suggestion how to speed this a little bit up?

  Read the article

• Hyper-V Virtual Machine Networking issues related to Max Ethernet Frame Size

  - by Goatmale

  I fixed an issue today earlier today but i'm interested in learning WHY it worked. We set up a new Hyper-V virtual machine only to discover that HTTP traffic wasn't working. HTTPS, pings, everything else was working fine. After months of prodding around I took a shot in the dark. On the Hyper-V host server, the physical NIC card had an advanced setting of "Max Ethernet Frame Size" set to 1500. After setting this setting to 1514 the issue was fixed. Alternatively, setting this to 1512 did not solve the issue; 1514 is the magic number. My best guess it that when this setting was set to 1500 it was allowing incoming pings because the data payload was a lot smaller of say, HTTP traffic. As far as HTTPS traffic, I read about something called "Path MTU discovery" which i'm going to assume why is HTTPs traffic was getting through fine, albeit slower. Looking at this post, people agree that 1518 is the max total frame size. Why didn't I need to change this to 1518 instead of 1514 bytes? Why is the default frame size 1500 if that's the max size of the Ethernet payload and not the max size.

  Read the article

• Why are FMS logs filled with 'play' event status code 408 for a failed webcast?

  - by Stu Thompson

  Recently we had a live webcast event go horribly wrong. I'm doing the technical post-mortem, with limited information. We know that the hardware encoder (a Digital Rapid Touch Stream Web HDI) was unable to send upstream at a sustained reliable high rate. What we don't know is if the encoder's connection was problematic (Zürich), or that of the streaming server (in Frankfurt). Unfortunately, I've got three different vendors all blaming each other (the CDN who runs the server, the on-site ISP and the on-site encoding team.) In the FMS log files I see a couple of interesting things: Zillions of Status Code 408 on play event entries for clients. Adobe's documentation stats that this "Stream stopped because client disconnected". ("Zillions" would be a ratio of 10 events for every individual IP address.) Several unpublish / (re)publish events per hour for the encoder I'd like to know if all those 408s could tell me with authority that the FMS server was starved for bandwidth, or that the encoding signal was starved (and hence the server was disconnecting clients.) Any clues?

  Read the article

• "Windows cannot find" file when opening Excel spreadsheet

  - by DanH

  For all of my Excel spreadsheets when I attempt to open them (by double-clicking in explorer) I get the message "Windows cannot find C:...". The files are there, and are valid zip files as seen by 7-Zip. There are no apparent lock files in the directories. I did just install Norton-360 over the weekend (replacing Kasperski), but the Norton log shows no events related to Excel. However, while installing Norton I did reboot with some Excel files open. Presumably something is hosed in my Excel configuration but I don't know what. Update (Before actually posting) -- I found an article that suggested turning off Advanced Option "Ignore other applications that use DDE", then doing excel.exe /unregister followed by excel.exe /register. I tried this but I suspect that the two Excel calls were ignored (Excel opened, but no obvious change). With that option off the spreadsheets load OK, but not with it on. And, curiously, spreadsheets load OK with the option on or off if I open Excel first and then open the spreadsheet in it. Does anyone have any idea what effect leaving that option off will have? Update 2 -- I tried running the "repair" option. It said it corrected a couple of config things (without saying what they were), but I still get a failure if I double-click an Excel file with the "Ignore other applications..." option checked. Update 3 -- I managed to fix this problem, but failed at the time to come back and say what I did, and now I can't remember for sure. But I think it had something to do with "Options"/"Save" and some of the values there. Something to do with AutoRecover, perhaps. (Possibly there was a file in recovery and I had to specify "Disable AutoRecover for this workbook" to let bring-up get past it. Or perhaps the AutoRecover file location was hosed.) Anyway, if it happens to someone else, and you find the fix, post it below and I'll mark it answered.

  Read the article

• ASUS EAH5450 Graphics Card (ATI Radeon HD5450 - 1 GB DDR3) on Windows 2003? Anybody got it to work?

  - by JJarava

  Hi all! I've just bought an ASUS EAH5450 Graphics Card (ATI Radeon HD5450, 1 GB DDR3) for my main system, but I haven't been able to make it work under Windows 2003 (my OS in that system). When I plugged the card, I got a couple of "installing drivers" prompt for things such as "ATI High Definition Audio Device" that got themselves sorted out of the Internet, and then a "Standard VGA Graphics Adapter". The CD that came with the card installs something called "ATI Catalyst Install Manager" and .net 2.0, but no drivers. I've downloaded the latest (WinXP 32bits) drivers from ATI, and the experience is the same: I don't get any drivers installed. My Motherboard is an ASUS A8N-SLI with nVidia nForce 4 chipset (for an Athlon 64X2, somewhat old), but my previous card was an ATi Radeon X700, so it's been working with ATI cards before. On POST, during boot I see a "Display Card" Device (Vendor ID 1002-68F9-0300) and a "Multimedia Device" (1002-AA68-0403), and when viewing the properties of the "Standard VGA", they match the device ID. Any hints? I'd really hate having to get rid of the card, and I'm sure it's not that strange what I'm trying to do...

  Read the article

• Mac OS X software always order files alphabetically rather than by type.

  - by george

  I have noticed many Mac applications sort the files alphabetically rather than by type. A good example would be Coda by panic.com. The files in the file menu are organized alphabetically. I requested for them to add the feature to organize files by type, and they've said that it's a Finder thing. So I looked at other applications to see if they were organizing by type. I noticed Dreamweaver CS4 had this same problem and now including Dreamweaver CS5. There has to be something in the Mac that does this and that I can modify. I played with Spotlight and it now displays its files by type (thinking that's what I can do) but it didn't take effect in other applications. What library are these applications using to display a file menu for their files? here is an example-- file menu layout of coda by panic.com. (i couldnt post another link because it wouldnt let me). can you see how everything is organised alphabetically rather than by folder? i just want the file menu to show all folders first then all the files. 1) http://www.iaddesign.com/coda.png there must be a way to modify mac to let me to do this.

  Read the article

• Help: Setup Outgoing Mail Server Only for Multiple Domains Using Postfix?

  - by user57697

  I want an outgoing mail server ONLY for multiple domains. I plan to use Postfix as that seems to be the easiest to setup being very new to Ubuntu/Linux. The setup I plan to have are as follows: I want to use virtual domain with postfix i.e. my multiple websites must be able to send an email from each their respective domains i.e. [email protected] is sent from my domain1.com website and [email protected] is sent from domain2.com website This is an outgoing mail server only i.e. I don't want any returned (or otherwise) email sent to my postfix server. Incoming mail is handled by Google Apps/Gmail and is already setup. I already set my SPF recording to designate my mx records and postfix server ip as valid email servers i.e. "v=spf1 mx include:mydomain.com -all" How can I achieve this? I'm frankly a little confused, so some help would be appreciated. I attempted to follow these guides here, but it doesn't seem right (and it isn't clear what all the settings mean): How to configure Postfix virtual domains http://www.sysdesign.ca/guides/postfix_virtual.html Postfix Installation *.slicehost.com/2008/7/29/postfix-installation Basic Postfix settings (main.cf) *.slicehost.com/2008/7/31/postfix-basic-settings-in-main-cf I can only post one link, but those articles above can be found by replacing * with articles in the hyperlink.

  Read the article

• Using ZFS or XFS on a Xen guest running Linux

  - by zoot

  Background: I'm investigating the viability of using a filesystem other than ext3/4, with the ability to run snapshots for backup and rollback purposes. The servers under consideration are mailbox server nodes running on Linode's Xen based VPS platform. I'm particularly drawn to the various published benefits which ZFS offers in terms of data integrity and this year's stable release of native ZFS support in Linux - http://zfsonlinux.org ZFS appears to be the more thorough option in terms of benefits and simplicity (instead of LVM+XFS). Please note that I have little experience with ZFS (which I use on a local FreeNAS installation) and none with XFS, hence the post. To date, my servers are using ext3 filesystems, not managed under LVM. Question in detail: So, I have two questions. (1) Which of the two filesystems would be the better choice for the best of all of the following 3 aspects, running on a Xen Linux guest? Snapshots Data Integrity Performance (2) If ZFS is a viable option, is it practical to use ZRAID across Xen disk images to further enhance the solution for data integrity? Note: I'm reluctant to consider btrfs, given the many warnings I've read about in using it on production systems.

  Read the article

• Usage of putty in command line from Hudson

  - by kij

  Hi, I'm trying to use putty in command line from an hudson job. The command is the following one: putty -ssh -2 -P 22 USERNAME@SERVER_ADDR -pw PASS -m command.txt Where 'command.txt' is a shell script to execute in the server through SSH. If i launch this command from the Window command prompt, it works, the shell script is executed on the server machine. If i launch a build of the hudson job configured with this batch command, it doesn't work. The build is running... and running... and running.. without doing anything, and i have to stop it manually. So my question is: Is it possible to launch an external programm (i.e. putty) from an hudson job ? ps: i tried SSH plugin but... not a really good plugin (pre/post build, fail status of the commands launched not caught by hudson, etc.) Thanks in advance for your help. Best regards. kij EDIT: These are the build logs: [workspace] $ cmd /c call C:\WINDOWS\TEMP\hudson7429256014041663539.bat C:\Hudson\jobs\Artifact deployer\workspace>putty -ssh -2 -P 22 USER@SERV_ADD -pw PASS -m com.txt Le build a été annulé Finished: ABORTED And the Hudson.err.log file at the same time (after a stop): 3 juin 2010 18:27:28 hudson.model.Run run INFO: Artifact deployer #6 aborted java.lang.InterruptedException at java.lang.ProcessImpl.waitFor(Native Method) at hudson.Proc$LocalProc.join(Proc.java:179) at hudson.Launcher$ProcStarter.join(Launcher.java:278) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:83) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:601) at hudson.model.Build$RunnerImpl.build(Build.java:174) at hudson.model.Build$RunnerImpl.doRun(Build.java:138) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:416) at hudson.model.Run.run(Run.java:1241) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:124) My shell script only write "hello" in a "hello.txt" file on the server, and nothing is done.

  Read the article

• Unable to install mysql-server in Ubuntu

  - by Arihant

  I am unable to install mysql-server on my ubuntu 9.10 server machine. When using apt-get install mysql-server the output is : # apt-get install mysql-server Reading package lists... Done Building dependency tree Reading state information... Done mysql-server is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 120 not upgraded. 2 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up mysql-server-5.1 (5.1.37-1ubuntu5.4) ... * Stopping MySQL database server Mysqld [ OK ] * Starting MySQL database server mysqld [fail] invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.1 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.1; however: Package mysql-server-5.1 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: mysql-server-5.1 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) I cant find a satisfactory solution to this problem anywhere. Many sites tell to reinstall it but its not working. Any help will be appreciated. Thank you..

  Read the article

• Opening port 80 in router has no results

  - by Ricardo Pieper

  A friend of mine has a ADSL modem and I need to forward some ports. I have already forwarded the 1521 port (Oracle) and it's working fine. Now I need to forward the port 80. I already set up his IIS bindings to this port, and also forwarded the port like this video shows: https://www.youtube.com/watch?v=DLKD-fyexoo So I think I did everything correctly. The local IP address is also the same as the machine where the IIS server is running. I'm sorry, but I can't post images since i don't have 10 points :( Somehow I can't forward this port, yougetsignal.com keeps saying that the door is closed. When I try to open the port, the Control Panel says me that I have to access the control panel in the 8080 port, because the 80 port will be open. Ok, that's fine. But I'm still able to access it in the 80 port, and when I try to access it in the 8080 port, it doesn't work. I'm trying it with the TPLINK 8816, but I also tried to open it in the Opticom DsLink 279, and it didn't worked (using another machine), I got the exact same results. He has a dynamic IP address, but he is also using No-ip, so I can always access his Oracle database in a certain static address. The 1521 port is open. I also tried to disable the firewall in Windows, but that makes no sense to me, since the router doesn't really open the port 80. Clearly I'm missing something. I have never done it in my life, so I dont know how to proceed. Restarting the router was the first I did, no results. I'm accessing his laptop through TeamViewer, so I'm testing the port outside his local network. Edit: My ISP says that they allow to open ports, and the 1521 port is opened. What could I do to open the 80 port?

  Read the article

• Lotus Domino - DAOS not reducing file size?

  - by SydxPages

  I have implemented DAOS on a Lotus Domino Server (8.5.3 FP2) as follows: Lotus Domino Server Document: Store file attachments in DAOS: Enabled Minimum size of object before Domino will store in DAOS: 64000 bytes DAOS base path: E:\DAOS Defer object deletion for: 30 days Transaction logging is running, and the specific test database has the following advanced properties set: Domino Attachment and Object Service (ticked) Use LZ1 compression for atachments Compress Database Design Compress Data I have restarted the server. When I run a compact -c, it compacts the database, but does not reduce the size. I have checked the DB in Windows Explorer (60Gb) and the size is the same pre and post. I have checked the directory (E:\DAOS) and it is 35Gb in size. When I run the command 'Tell DAOSMgr Status tmp\test.nsf', I get the following response. From looking up on the net, I believe ticket count = 0 means that the db is not really DAOS'ed? Admin Process: Searching Administration Requests database DAOSMGR: Status tmptest.nsf started DAOS database status: Database: E:\Lotus\Domino\Data\tmp\test.nsf Database state = Synchronized Last resynchronized: 03/09/2012 02:49:13 PM Ticket count: 0 DAOSMGR: Status tmp\test.nsf completed I have run fixup on the database. When I have tried to run the DAOS estimator it has always crashed. This was a problem with larger databases on earlier versions of domino, but not anymore. Can anyone tell me why the size has not reduced? Am I missing anything?

  Read the article

• Using IIS7 as a reverse proxy

  - by Jon

  My question is pretty much identical to the question listed but they did not get an answer as they ended up using Linux as the reverse proxy. http://serverfault.com/questions/55309/using-iis7-as-a-reverse-proxy I need to have IIS the main site and linux (Apache) being the proxied site(s). so I have site1.com (IIS7) site2.com (Linux Apache) they have subdomains of sub1.site1.com sub2.site1.com sub3.site2.com I want all traffic to go to site1.com and to say anything that is site2.com should be proxied to linux box on internal network, (believe ARR can do this but not sure how). I can not have it running as Apache doing the proxying as I need IIS exposed directly. any and all advice would be great. EDIT I think this might help me: <rule name="Canonical Host Name" stopProcessing="true"> <match url="(.*)" /> <conditions> <add input="{HTTP_HOST}" negate="true" pattern="^cto\.com$" /> <add input="{HTTP_HOST}" negate="true" pattern="^antoniochagoury\.com$" /> <add input="{HTTP_HOST}" negate="true" pattern="www.antoniochagoury\.com$" /> </conditions> <action type="Redirect" url="http://www.cto20.com/{R:1}" redirectType="Permanent" /> </rule> from: http://www.cto20.com/post/Tips-Tricks-3-URL-Rewriting-Rules-Everyone-Should-Use.aspx I will have a look at this when I have access to the IIS7 box. Thanks

  Read the article

• Nginx proxy domain to another domain with no change URL

  - by Evgeniy

  My question is in the subj. I have a one domain, that's nginx's config of it: server { listen 80; server_name connect3.domain.ru www.connect3.domain.ru; access_log /var/log/nginx/connect3.domain.ru.access.log; error_log /var/log/nginx/connect3.domain.ru.error.log; root /home/httpd/vhosts/html; index index.html index.htm index.php; location ~* \.(avi|bin|bmp|css|dmg|doc|docx|dpkg|exe|flv|gif|htm|html|ico|ics|img|jpeg|jpg|js|m2a|m2v|mov|mp3|mp4|mpeg|mpg|msi|pdf|pkg|png|pps|ppt|pptx|ps|rar|rss|rtf|swf|tif|tiff|txt|wmv|xhtml|xls|xml|zip)$ { root /home/httpd/vhosts/html; access_log off; expires 1d; } location ~ /\.(git|ht|svn) { deny all; } location / { #rewrite ^ http://connect2.domain.ru/; proxy_pass http://127.0.0.1:8080/; proxy_redirect off; proxy_hide_header "Cache-Control"; add_header Cache-Control "no-store, no-cache, must-revalidate, post-check=0, pre-check=0"; proxy_hide_header "Pragma"; add_header Pragma "no-cache"; expires -1; add_header Last-Modified $sent_http_Expires; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } I need to proxy connect3.domain.ru host to connect2.domain.ru, but with no URL changed in browser's address bars. My commented out rewrite line could solve this problem, but it's just a rewrite, so I cannot stay with the same URL. I know that this question is easy, but please help. Thank you.

  Read the article

• Password Cracking Windows Accounts

  - by Kevin

  At work we have laptops with encrypted harddrives. Most developers here (on occasion I have been guilty of it too) leave their laptops in hibernate mode when they take them home at night. Obviously, Windows (i.e. there is a program running in the background which does it for windows) must have a method to unencrypt the data on the drive, or it wouldn't be able to access it. That being said, I always thought that leaving a windows machine on in hibernate mode in a non-secure place (not at work on a lock) is a security threat, because someone could take the machine, leave it running, hack the windows accounts and use it to encrypt the data and steal the information. When I got to thinking about how I would go about breaking into the windows system without restarting it, I couldn't figure out if it was possible. I know it is possible to write a program to crack windows passwords once you have access to the appropriate file(s). But is it possible to execute a program from a locked Windows system that would do this? I don't know of a way to do it, but I am not a Windows expert. If so, is there a way to prevent it? I don't want to expose security vulnerabilities about how to do it, so I would ask that someone wouldn't post the necessary steps in details, but if someone could say something like "Yes, it's possible the USB drive allows arbitrary execution," that would be great! EDIT: The idea being with the encryption is that you can't reboot the system, because once you do, the disk encryption on the system requires a login before being able to start windows. With the machine being in hibernate, the system owner has already bypassed the encryption for the attacker, leaving windows as the only line of defense to protect the data.

  Read the article

• Exchange 2003: Unrestrict send mail size for specific users / groups?

  - by Kip

  Good (insert appropriate time of day here) SF folks, I have the following situation; We have a message size limit for sending set at 20mb in Global Settings | Message Delivery. We have a limit of 50mb set at an external 3rd party spam vendor. I need to enable some users to be able to send messages that are upwards of around 40mb in size. However, when I set the Sending Message Size Maximum to 50mb within the delivery restrictions of a users exchange properties, it would appear that this does not win. It seems that the lowest value wins for this situation. I need to be able to allow certain users to send messages larger than the 20mb limit, but to have everyone else have the 20mb limit in place. How can I do this? The only way I could see was to raise the limit set in Global Settings | Message Delivery to 50mb and then set everyone elses (bar the people who need increased limit) delivery restrictions max size down. But I cannot see an easy way to do the last bit hence my post here looking for advice. There are valid reasons we need to send mail this size and whilst we are putting together other mechanisms for delivery this data, we still need to get this put in place. Thanks in advance Kip

  Read the article

< Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >