Search Results

Search found 4708 results on 189 pages for '2005'.

Page 62/189 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • SSIS DTS Package flat file error - "The file name specified in the connection was not valid"

    - by MisterZimbu
    I have a pretty basic SSIS package that is attempting to read a file hosted on a share, and import its contents to a database table. The package runs fine when I run it manually within SSIS. However, when I set up a SQL Agent job and attempt to execute it, I get the following error: Executed as user: DOMAIN\UserName. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:14:17 AM Error: 2010-05-03 10:14:17.75 Code: 0xC001401E Source: DataImport Connection manager "Data File Local" Description: The file name "\10.1.1.159\llpf\datafile.dat" specified in the connection was not valid. End Error Error: 2010-05-03 10:14:17.75 Code: 0xC001401D Source: DataAnimalImport Description: Connection "Data File Local" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:14:17 AM Finished: 10:14:17 AM Elapsed: 0.594 seconds. The package execution failed. The step failed. This leads me to believe it's a permissions issue, but every attempt I've made to fix it has failed. What I've tried so far: Run as the SQL Agent account (DOMAIN\SqlAgent) - yields same error. DOMAIN\SqlAgent has "Full Control" permissions on both the share and the uploaded file. Set up a proxy account with a different account's credentials (DOMAIN\Account) - yields same error. Like above, "Full Control" permissions were given over the share to that account. Gave "Everyone" full control permissions over the share (temporarily!). Yielded same error. Manually copied the file to a local path and tested with the SQL Agent account. Worked properly. Added an ActiveX script task that would first copy the remotely hosted file to a local path, and then have the DTS package reference the local file. Gave a completely nondescriptive (even by SSIS standards) error when trying to run the script. Set up a proxy account, using my own personal account's credentials - worked correctly. However, this is not an acceptable solution as there are password policies in place on my account, as well as being a bad practice to set things up this way in general. Any ideas? I'm still convinced it's a permissions issue. However, what I've read from various searches more or less says giving the executing account permissions on the share should work. However, this is not the case here (unless I'm missing something obscure when I'm setting up permissions on the share).

    Read the article

  • Query Results Not Expected

    - by E-Madd
    I've been a CF developer for 15 years and I've never run into anything this strange or frustrating. I've pulled my hair out for hours, googled, abstracted, simplified, prayed and done it all in reverse. Can you help me? A cffunction takes one string argument and from that string I build an array of "phrases" to run a query with, attempting to match a location name in my database. For example, the string "the republic of boulder" would produce the array: ["the","republic","of","boulder","the republic","the republic of","the republic of boulder","republic of","republic of boulder","of boulder"]. Another cffunction uses the aforementioned cffunction and runs a cfquery. A query based on the previously given example would be... select locationid, locationname, locationaliasname from vwLocationsWithAlias where LocationName in ('the','the republic','the republic of','republic','republic of','republic of boulder','of','of boulder','boulder') or LocationAliasName in ('the','the republic','the republic of','republic','republic of','republic of boulder','of','of boulder','boulder') This returns 2 records... locationid - locationname - locationalias 99 - 'Boulder' - 'the republic' 68 - 'Boulder' - NULL This is good. Works fine and dandy. HOWEVER... if the string is changed to "the republic", resulting in the phrases array ["the","republic","the republic"] which is then used to produce the query... select locationid, locationname, locationaliasname from vwLocationsWithAlias where LocationName in ('the','the republic','republic') or LocationAliasName in ('the','the republic','republic') This returns 0 records. Say what?! OK, just to make sure I'm not involuntarily HIGH I run that very same query in my SQL console against the same database in the cf datasource. 1 RECORD! locationid - locationname - locationalias 99 - 'Boulder' - 'the republic' I can even hard-code that sql within the same cffunction and get that one result, but never from the dynamically generated SQL. I can get my location phrases from another cffunction of a different name that returns hard-coded array values and those work, but never if the array is dynamically built. I've tried removing cfqueryparams, triple-checking my datatypes, datasource setups, etc., etc., etc. NO DICE WTF!? Is this an obscure bug? Am I losing my mind? I've tried everything I can think of and others (including Ray Camden) can think of. ColdFusion 8 (with all the latest hotfixes) SQL Server 2005 (with all the greatest service packs) Windows 2003 Server (with all the latest updates, service packs and nightly MS voodoo)

    Read the article

  • What is the best way to archive data in a relational database?

    - by GenericTypeTea
    I have a bit of an issue with a particular aspect of a program I'm working on. I need the ability to archive (fix) a table so that a change anywhere in the system will not affect the results it returns. This is the basic structure of what I need to fix: Recipe --> Recipe (as sub recipe) Recipe --> Ingredients So, if I fix a Recipe, I need to ensure all the sub recipes (including all the sub recipes sub recipes and so forth) are fixed and all its ingredients are fixed. The problem is that the sub recipe and ingredients still need to be modifiable as they are used by other recipes that are not fixed. I came up with a solution whereby I serialize (with protobuf-net) a master object that deals with the recipe and all the sub recipes and ingredients and save the archive data to a table like follows: Archive{ ReferenceId, (i.e. RecipeId) ReferenceTypeId, (i.e. Recipe) ArchiveData varbinary(max) } Now, this works great and is almost perfect... however I totally forgot (I'd love to blame the agile development mentally, however this was just short sighted) that this information needs to be reported on. As far as I'm aware I can't think how I could inflate the serialized data back into my Recipe Object and use it in a Report. I'm using the standard SQL 2005 report services at the moment. Alternatively, I guess I could do the following: Duplicate every table and tag the word "Archive" on the end of the table name. This would then give me an area of specific archive data... but ignoring my simplified example, there'd actually be about 15 tables duplicated. Add a nullable, non-foreign key property called "CopiedFromId" to every table that contains fixed data and duplicate every record that the recipe (and all it's sub recipes and all their sub recipes) touches. Create some sort of denormalised structure that could be restored from at a later date to the original, unfixed recipe. Although I think this would be like option 1 and involve a lot of extra tables. Anyway, I'm at a total loss and do not like any of the ideas particularly. Can anyone please advise the best course of action? EDIT: Or 4) Create tables specific to what the report requires and populate them with the data when the user clicks the report button? This would cause about 4 extra tables for the report in question.

    Read the article

  • How to enable UAC prompt through programming

    - by peter
    I want to implement a UAC prompt for an application in visualc++ the operating system is 32bit x7460(2processor) Windowsserver 2008 the exe is myproject.exe through manifest.. Here for testing i wl build the application in Windows XP OS and copy the exe in to system containg the Windowsserver 2008 machine and replace it So what i did is i added a manifest like this name of that is myproject.exe.manifest My project has 3 folders like Headerfile,Resourcefile and Source file.I added this manifest(myproject.exe.manifest) in the Sourcefile folder containing other cpp and c code <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="11.1.4.0" processorArchitecture="X7460" name="myproject" type="win32"/> <description>myproject Problem</description> <!-- Identify the application security requirements. --> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v2"> <security> <requestedPrivileges> <requestedExecutionLevel level="requireAdministrator" uiAccess="false"/> </requestedPrivileges> </security> </trustInfo> </assembly> then i added this line of code in Resourcefile(.rc).Means one header file is there(Myproject.h).I added the line of code there #define MANIFEST_RESOURCE_ID 1 MANIFEST_RESOURCE_ID RT_MANIFEST "myproject.exe.manifest" Finally i did the following step 1. Open your project in Microsoft Visual Studio 2005. 2. Under Project, select Properties. 3. In Properties, select Manifest Tool, and then select Input and Output. 4. Add in the name of your application manifest file under Additional manifest files. 5. Rebuild your application. But i am getting lot of Syntax errors Is there any problems in the way which i followed.If i commented the line define MANIFEST_RESOURCE_ID 1 MANIFEST_RESOURCE_ID RT_MANIFEST "myproject.exe.manifest" which added in Myproject.h for adding values in .rc file there willnot any error other than this general error c1010070: Failed to load and parse the manifest. The system cannot find the file specified. .\myproject.exe.manifest How to enable UAC prompt through programming

    Read the article

  • Summarising (permanently) data in a SQL table

    - by Cylindric
    Geetings, Stackers. I have a huge number of data-points in a SQL table, and I want to summarise them in a way reminiscent of RRD. Assuming a table such as ID | ENTITY_ID | SCORE_DATE | SCORE | SOME_OTHER_DATA ----+-----------+------------+-------+----------------- 1 | A00000001 | 01/01/2010 | 100 | some data 2 | A00000002 | 01/01/2010 | 105 | more data 3 | A00000003 | 01/01/2010 | 104 | various text ... | ......... | .......... | ..... | ... ... | A00009999 | 01/01/2010 | 101 | ... | A00000001 | 02/01/2010 | 104 | ... | A00000002 | 02/01/2010 | 119 | ... | A00000003 | 02/01/2010 | 119 | ... | ......... | .......... | ..... | ... | A00009999 | 02/01/2010 | 101 | arbitrary data ... | ......... | .......... | ..... | ... ... | A00000001 | 01/02/2010 | 104 | ... | A00000002 | 01/02/2010 | 119 | ... | A00000003 | 01/01/2010 | 119 | I want to end up with one record per entity, per month: ID | ENTITY_ID | SCORE_DATE | SCORE | ----+-----------+------------+-------+ ... | A00000001 | 01/01/2010 | 100 | ... | A00000002 | 01/01/2010 | 105 | ... | A00000003 | 01/01/2010 | 104 | ... | A00000001 | 01/02/2010 | 100 | ... | A00000002 | 01/02/2010 | 105 | ... | A00000003 | 01/02/2010 | 104 | (I Don't care about the SOME_OTHER_DATA - I'll pick something - either the first or last record probably.) What's an easy way of doing this on a regular basis, so that anything in the last calendar month is summarised in this way? At the moment my plan is kind of: For each EntityID For each month Find average score for all records in given month Update first record with results of previous step Delete all records that aren't the first I can't think of a neat way of doing it though, that doesn't involve lots of updates and iteration. This can either be done in a SQL Stored Procedure, or it can be incorporated into the .Net app that's generating this data, so the solution doesn't really need to be "one big SQL script", but can be :) (SQL-2005)

    Read the article

  • Problems Enforcing Referential Integrity on SQL Server Tables

    - by SidC
    Hello All, I have a SQL Server 2005 database comprised of Customer, Quote, QuoteDetail tables. I want/need to enforce referential integrity such that when an insert is made on quotedetail, the quote and customer tables are also affected. I have tried my best to set up primary/foreign keys on my tables but need some help. Here's the scripts for my tables as they stand now (please don't laugh): Customers: USE [Diel_inventory] GO /****** Object: Table [dbo].[Customers] Script Date: 05/08/2010 03:39:04 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[Customers]( [pkCustID] [int] IDENTITY(1,1) NOT NULL, [CompanyName] [nvarchar](50) NULL, [Address] [nvarchar](50) NULL, [City] [nvarchar](50) NULL, [State] [nvarchar](2) NULL, [ZipCode] [nvarchar](5) NULL, [OfficePhone] [nvarchar](12) NULL, [OfficeFAX] [nvarchar](12) NULL, [Email] [nvarchar](50) NULL, [PrimaryContactName] [nvarchar](50) NULL, CONSTRAINT [PK_Customers] PRIMARY KEY CLUSTERED ([pkCustID] ASC)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] Quotes: USE [Diel_inventory] GO /****** Object: Table [dbo].[Quotes] Script Date: 05/08/2010 03:30:46 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[Quotes]( [pkQuoteID] [int] IDENTITY(1,1) NOT NULL, [fkCustomerID] [int] NOT NULL, [QuoteDate] [timestamp] NOT NULL, [NeedbyDate] [datetime] NULL, [QuoteAmt] [decimal](6, 2) NOT NULL, [QuoteApproved] [bit] NOT NULL, [fkOrderID] [int] NOT NULL, CONSTRAINT [PK_Bids] PRIMARY KEY CLUSTERED ( [pkQuoteID] ASC)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Quotes] WITH CHECK ADD CONSTRAINT [fkCustomerID] FOREIGN KEY([fkCustomerID]) REFERENCES [dbo].[Customers] ([pkCustID]) GO ALTER TABLE [dbo].[Quotes] CHECK CONSTRAINT [fkCustomerID] QuoteDetail: USE [Diel_inventory] GO /****** Object: Table [dbo].[QuoteDetail] Script Date: 05/08/2010 03:31:58 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[QuoteDetail]( [ID] [int] IDENTITY(1,1) NOT NULL, [fkQuoteID] [int] NOT NULL, [fkCustomerID] [int] NOT NULL, [fkPartID] [int] NULL, [PartNumber1] [float] NOT NULL, [Qty1] [int] NOT NULL, [PartNumber2] [float] NULL, [Qty2] [int] NULL, [PartNumber3] [float] NULL, [Qty3] [int] NULL, [PartNumber4] [float] NULL, [Qty4] [int] NULL, [PartNumber5] [float] NULL, [Qty5] [int] NULL, [PartNumber6] [float] NULL, [Qty6] [int] NULL, [PartNumber7] [float] NULL, [Qty7] [int] NULL, [PartNumber8] [float] NULL, [Qty8] [int] NULL, [PartNumber9] [float] NULL, [Qty9] [int] NULL, [PartNumber10] [float] NULL, [Qty10] [int] NULL, [PartNumber11] [float] NULL, [Qty11] [int] NULL, [PartNumber12] [float] NULL, [Qty12] [int] NULL, [PartNumber13] [float] NULL, [Qty13] [int] NULL, [PartNumber14] [float] NULL, [Qty14] [int] NULL, [PartNumber15] [float] NULL, [Qty15] [int] NULL, [PartNumber16] [float] NULL, [Qty16] [int] NULL, [PartNumber17] [float] NULL, [Qty17] [int] NULL, [PartNumber18] [float] NULL, [Qty18] [int] NULL, [PartNumber19] [float] NULL, [Qty19] [int] NULL, [PartNumber20] [float] NULL, [Qty20] [int] NULL, CONSTRAINT [PK_QuoteDetail] PRIMARY KEY CLUSTERED ( [ID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO ALTER TABLE [dbo].[QuoteDetail] WITH CHECK ADD CONSTRAINT [FK_QuoteDetail_Customers] FOREIGN KEY ([fkCustomerID]) REFERENCES [dbo].[Customers] ([pkCustID]) GO ALTER TABLE [dbo].[QuoteDetail] CHECK CONSTRAINT [FK_QuoteDetail_Customers] GO ALTER TABLE [dbo].[QuoteDetail] WITH CHECK ADD CONSTRAINT [FK_QuoteDetail_PartList] FOREIGN KEY ([fkPartID]) REFERENCES [dbo].[PartList] ([RecID]) GO ALTER TABLE [dbo].[QuoteDetail] CHECK CONSTRAINT [FK_QuoteDetail_PartList] GO ALTER TABLE [dbo].[QuoteDetail] WITH CHECK ADD CONSTRAINT [FK_QuoteDetail_Quotes] FOREIGN KEY([fkQuoteID]) REFERENCES [dbo].[Quotes] ([pkQuoteID]) GO ALTER TABLE [dbo].[QuoteDetail] CHECK CONSTRAINT [FK_QuoteDetail_Quotes] Your advice/guidance on how to set these up so that customer ID in Customers is the same as in Quotes (referential integrity) and that CustomerID is inserted on Quotes and Customers when an insert is made to QuoteDetial would be much appreciated. Thanks, Sid

    Read the article

  • vb6 ADODB TSQL procedure call quit working after database migration

    - by phill
    This code was once working on sql server 2005. Now isolated in a visual basic 6 sub routine using ADODB to connect to a sql server 2008 database it throws an error saying: "Login failed for user 'admin' " I have since verified the connection string does work if i replace the body of this sub with the alternative code below this sub. When I run the small program with the button, it stops where it is marked below the asterisk line. Any ideas? thanks in advance. Private Sub Command1_Click() Dim cSQLConn As New ADODB.Connection Dim cmdGetInvoices As New ADODB.Command Dim myRs As New ADODB.Recordset Dim dStartDateIn As Date dStartDateIn = "2010/05/01" cSQLConn.ConnectionString = "Provider=sqloledb;" _ & "SERVER=NET-BRAIN;" _ & "Database=DB_app;" _ & "User Id=admin;" _ & "Password=mudslinger;" cSQLConn.Open cmdGetInvoices.CommandTimeout = 0 sProc = "GetUnconvertedInvoices" 'On Error GoTo GetUnconvertedInvoices_Err With cmdGetInvoices .CommandType = adCmdStoredProc .CommandText = "_sp_cwm5_GetUnCvtdInv" .Name = "_sp_cwm5_GetUnCvtdInv" Set oParm1 = .CreateParameter("@StartDate", adDate, adParamInput) .Parameters.Append oParm1 oParm1.Value = dStartDateIn .ActiveConnection = cSQLConn End With With myRs .CursorLocation = adUseClient .LockType = adLockBatchOptimistic .CursorType = adOpenKeyset '.CursorType = adOpenStatic .CacheSize = 5000 '***************************Debug stops here .Open cmdGetInvoices End With If myRs.State = adStateOpen Then Set GetUnconvertedInvoices = myRs Else Set GetUnconvertedInvoices = Nothing End If End Sub Here is the code which validates the connection string is working. Dim cSQLConn As New ADODB.Connection Dim cmdGetInvoices As New ADODB.Command Dim myRs As New ADODB.Recordset cSQLConn.ConnectionString = "Provider=sqloledb;" _ & "SERVER=NET-BRAIN;" _ & "Database=DB_app;" _ & "User Id=admin;" _ & "Password=mudslinger;" cSQLConn.Open cmdGetInvoices.CommandTimeout = 0 sProc = "GetUnconvertedInvoices" With cmdGetInvoices .ActiveConnection = cSQLConn .CommandText = "SELECT top 5 * FROM tarInvoice;" .CommandType = adCmdText End With With myRs .CursorLocation = adUseClient .LockType = adLockBatchOptimistic '.CursorType = adOpenKeyset .CursorType = adOpenStatic '.CacheSize = 5000 .Open cmdGetInvoices End With If myRs.EOF = False Then myRs.MoveFirst Do MsgBox "Record " & myRs.AbsolutePosition & " " & _ myRs.Fields(0).Name & "=" & myRs.Fields(0) & " " & _ myRs.Fields(1).Name & "=" & myRs.Fields(1) myRs.MoveNext Loop Until myRs.EOF = True End If

    Read the article

  • BULK INSERT from one table to another all on the server

    - by steve_d
    I have to copy a bunch of data from one database table into another. I can't use SELECT ... INTO because one of the columns is an identity column. Also, I have some changes to make to the schema. I was able to use the export data wizard to create an SSIS package, which I then edited in Visual Studio 2005 to make the changes desired and whatnot. It's certainly faster than an INSERT INTO, but it seems silly to me to download the data to a different computer just to upload it back again. (Assuming that I am correct that that's what the SSIS package is doing). Is there an equivalent to BULK INSERT that runs directly on the server, allows keeping identity values, and pulls data from a table? (as far as I can tell, BULK INSERT can only pull data from a file) Edit: I do know about IDENTITY_INSERT, but because there is a fair amount of data involved, INSERT INTO ... SELECT is kinda of slow. SSIS/BULK INSERT dumps the data into the table without regards to indexes and logging and whatnot, so it's faster. (Of course creating the clustered index on the table once it's populated is not fast, but it's still faster than the INSERT INTO...SELECT that I tried in my first attempt) Edit 2: The schema changes include (but are not limited to) the following: 1. Splitting one table into two new tables. In the future each will have its own IDENTITY column, but for the migration I think it will be simplest to use the identity from the original table as the identity for the both new tables. Once the migration is over one of the tables will have a one-to-many relationship to the other. 2. Moving columns from one table to another. 3. Deleting some cross reference tables that only cross referenced 1-to-1. Instead the reference will be a foreign key in one of the two tables. 4. Some new columns will be created with default values. 5. Some tables aren’t changing at all, but I have to copy them over due to the "put it all in a new DB" request.

    Read the article

  • 'Timeout Expired' error against local SQL Express on only 2 LINQ Methods...

    - by Refracted Paladin
    I am going to sum up my problem first and then offer massive details and what I have already tried. Summary: I have an internal winform app that uses Linq 2 Sql to connect to a local SQL Express database. Each user has there own DB and the DB stay in sync through Merge Replication with a Central DB. All DB's are SQL 2005(sp2or3). We have been using this app for over 5 months now but recently our users are getting a Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. Detailed: The strange part is they get that in two differnt locations(2 differnt LINQ Methods) and only the first time they fire in a given time period(~5mins). One LINQ method is pulling all records that match a FK ID and then Manipulating them to form a Heirarchy View for a TreeView. The second is pulling all records that match a FK ID and dumping them into a DataGridView. The only things I can find in common with the 2 are that the first IS an IEnumerable and the second converts itself from IQueryable - IEnumerable - DataTable... I looked at the query's in Profiler and they 'seemed' normal. They are not very complicated querys. They are only pulling back 10 - 90 records, from one table. Any thoughts, suggestions, hints whatever would be greatly appreciated. I am at my wit's end on this.... public IList<CaseNoteTreeItem> GetTreeViewDataAsList(int personID) { var myContext = MatrixDataContext.Create(); var caseNotesTree = from cn in myContext.tblCaseNotes where cn.PersonID == personID orderby cn.ContactDate descending, cn.InsertDate descending select new CaseNoteTreeItem { CaseNoteID = cn.CaseNoteID, NoteContactDate = Convert.ToDateTime(cn.ContactDate). ToShortDateString(), ParentNoteID = cn.ParentNote, InsertUser = cn.InsertUser, ContactDetailsPreview = cn.ContactDetails.Substring(0, 75) }; return caseNotesTree.ToList<CaseNoteTreeItem>(); } AND THIS ONE public static DataTable GetAllCNotes(int personID) { using (var context = MatrixDataContext.Create()) { var caseNotes = from cn in context.tblCaseNotes where cn.PersonID == personID orderby cn.ContactDate select new { cn.ContactDate, cn.ContactDetails, cn.TimeSpentUnits, cn.IsCaseLog, cn.IsPreEnrollment, cn.PresentAtContact, cn.InsertDate, cn.InsertUser, cn.CaseNoteID, cn.ParentNote }; return caseNotes.ToList().CopyLinqToDataTable(); } }

    Read the article

  • SQL server deadlock between INSERT and SELECT statement

    - by dtroy
    Hi! I've got a problem with multiple deadlocks on SQL server 2005. This one is between an INSERT and a SELECT statement. There are two tables. Table 1 and Table2. Table2 has Table1's PK (table1_id) as foreign key. Index on table1_id is clustered. The INSERT inserts a single row into table2 at a time. The SELCET joins the 2 tables. (it's a long query which might take up to 12 secs to run) According to my understanding (and experiments) the INSERT should acquire an IS lock on table1 to check referential integrity (which should not cause a deadlock). But, in this case it acquired an IX page lock The deadlock report: <deadlock-list> <deadlock victim="process968898"> <process-list> <process id="process8db1f8" taskpriority="0" logused="2424" waitresource="OBJECT: 5:789577851:0 " waittime="12390" ownerId="61831512" transactionname="user_transaction" lasttranstarted="2010-04-16T07:10:13.347" XDES="0x222a8250" lockMode="IX" schedulerid="1" kpid="3764" status="suspended" spid="52" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-04-16T07:10:13.350" lastbatchcompleted="2010-04-16T07:10:13.347" clientapp=".Net SqlClient Data Provider" hostname="VIDEV01-B-ME" hostpid="3040" loginname="DatabaseName" isolationlevel="read uncommitted (1)" xactid="61831512" currentdb="5" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="DatabaseName.dbo.prcTable2_Insert" line="18" stmtstart="576" stmtend="1148" sqlhandle="0x0300050079e62d06e9307f000b9d00000100000000000000"> INSERT INTO dbo.Table2 ( f1, table1_id, f2 ) VALUES ( @p1, @p_DocumentVersionID, @p1 ) </frame> </executionStack> <inputbuf> Proc [Database Id = 5 Object Id = 103671417] </inputbuf> </process> <process id="process968898" taskpriority="0" logused="0" waitresource="PAGE: 5:1:46510" waittime="7625" ownerId="61831406" transactionname="INSERT" lasttranstarted="2010-04-16T07:10:12.717" XDES="0x418ec00" lockMode="S" schedulerid="2" kpid="1724" status="suspended" spid="53" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-04-16T07:10:12.713" lastbatchcompleted="2010-04-16T07:10:12.713" clientapp=".Net SqlClient Data Provider" hostname="VIDEV01-B-ME" hostpid="3040" loginname="DatabaseName" isolationlevel="read committed (2)" xactid="61831406" currentdb="5" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="DatabaseName.dbo.prcGetList" line="64" stmtstart="3548" stmtend="11570" sqlhandle="0x03000500dbcec17e8d267f000b9d00000100000000000000"> <!-- XXXXXXXXXXXXXX...SELECT STATEMENT WITH Multiple joins including both Table2 table 1 and .... XXXXXXXXXXXXXXX --> </frame> </executionStack> <inputbuf> Proc [Database Id = 5 Object Id = 2126630619] </inputbuf> </process> </process-list> <resource-list> <pagelock fileid="1" pageid="46510" dbid="5" objectname="DatabaseName.dbo.table1" id="lock6236bc0" mode="IX" associatedObjectId="72057594042908672"> <owner-list> <owner id="process8db1f8" mode="IX"/> </owner-list> <waiter-list> <waiter id="process968898" mode="S" requestType="wait"/> </waiter-list> </pagelock> <objectlock lockPartition="0" objid="789577851" subresource="FULL" dbid="5" objectname="DatabaseName.dbo.Table2" id="lock970a240" mode="S" associatedObjectId="789577851"> <owner-list> <owner id="process968898" mode="S"/> </owner-list> <waiter-list> <waiter id="process8db1f8" mode="IX" requestType="wait"/> </waiter-list> </objectlock> </resource-list> </deadlock> </deadlock-list> Can anyone explain why the INSERT gets the IX page lock ? Am I not reading the deadlock report properly? BTW, I have not managed to reproduce this issue. Thanks!

    Read the article

  • PROJECT HELP NEEDED. SOME BASIC CONCEPTS GREAT CONFUSION BECAUSE OF LACK OF PROPER MATERIAL PLEASE H

    - by user287745
    Task ATTENDENCE RECORDER AND MANAGEMENT SYSTEM IN DISTRIBUTED ENVIRONMENT ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Example implementation needed. a main server in each lab where the operator punches in the attendence of the student. =========================================================== scenerio:- a college, 10 departments, all departments have a computer lab with 60-100 computers, the computers within each lab are interconnected and all computers in any department have to dail to a particular number (THE NUMBER GIVEN BY THE COLLEGE INTERNET DEPARTMENT) to get connected to the internet. therefore safe to assume that there is a central location to which all the computers in the college are connected to. there is a 'students attendence portal' which can be accessed using internet explorer, students enter there id and get the particular attendence record regarding to the labs only. a description of the working is like:- 1) the user will select which department, which year has arrived to the lab 2) the selection will give the user a return of all the students name and there roll numbers belonging to that department; 'with a check box to "TICK MARK IF THE STUDENT IS PRESENT" ' 3) A SUBMIT BUTTON when pressed reads the 'id' of the checkbox to determine the "particular count number of the student" from that an id of the student is constructed and that id is inserted with a present. (there is also date and time and much more to normalize the db and to avoid conflicts and keep historic records etc but that you will have to assume) steps taken till this date:- ( please note we are not computer students, we are to select something of some other line as a project!, as you will read in my many post 'i" have designed small websites just out of liking. have never ever done any thing official to implement like this.) * have made the database fully normalized. * have made the website which does the functions required on the database. Testing :- deployed the db and site on a free aspspider server and it worked. tested from several computers. Now the problem please help thank youuuuuuuu a practical demonstration has to be done within the college network. no internet! we have been assigned a lab - 60 computers- to demonstrate. (please dont give replies as 60 computers only! is not a big deal one CPU can manage it. i know that; IT IS A HYPOTHETICAL SITUATION WHERE WE ASSUME THAT 60 IS NOT 60 BUT ITS LIKE 60,000 COMPUTERS) 1a) make a web server, yes iis and put files in www folder and configure server to run aspx files- although a link to a step by step guide will be appreciated)\ ? which version of windows should i ask for xp or win server 2000 something? 2a) make a database server. ( well yes install sql server 2005, okay but then what? just put the database file on a pc share it and append the connection string to the share? ) 3a) make the site accessible from the remaining computers ? http://localhost/sitename ? all users "being operators of the particular lab" have the right to edit, write or delete(in dispute), thereby any "users" who hate our program can make the database inconsistent by accessing te same record and doing different edits and then complaining? so how to prevent this? you know something like when the db table is being written to others can only read but not write.. one big confusion:- IN DISTRIBUTED ENVIRONMENT "how to implement this" where does "distributed environment" come in! meaning :- alright the labs are in different departments but the "database server will be one" the "web server will be one" so whats distributed!?

    Read the article

  • initializing structs using user-input information

    - by johnny boy
    I am trying to make a program that works with poker (texas holdem) starting hands; each hand has a value from 1 to 169, and i want to be able to input each card and whether they are suited or not, and have those values correspond to a series of structs. Here is the code so far, i cant seem to get it to work (im a beginning programmer). oh and im using visual studio 2005 by the way #include "stdafx.h" #include <iostream> int main() { using namespace std; struct FirstCard { struct SecondCard { int s; //suited int n; //non-suited }; SecondCard s14; SecondCard s13; SecondCard s12; SecondCard s11; SecondCard s10; SecondCard s9; SecondCard s8; SecondCard s7; SecondCard s6; SecondCard s5; SecondCard s4; SecondCard s3; SecondCard s2; }; FirstCard s14; //ace FirstCard s13; //king FirstCard s12; //queen FirstCard s11; //jack FirstCard s10; FirstCard s9; FirstCard s8; FirstCard s7; FirstCard s6; FirstCard s5; FirstCard s4; FirstCard s3; FirstCard s2; s14.s14.n = 169; // these are the values that each combination s13.s13.n = 168; // will evaluate to, would eventually have s12.s12.n = 167; // hand combinations all the way down to 1 s11.s11.n = 166; s14.s13.s = 165; s14.s13.s = 164; s10.s10.n = 163; //10, 10, nonsuited s14.s13.n = 162; s14.s11.s = 161; s13.s12.s = 160;// king, queen, suited s9.s9.n = 159; s14.s10.s = 158; s14.s12.n = 157; s13.s11.s = 156; s8.s8.n = 155; s12.s11.s = 154; s13.s10.s = 153; s14.s9.s = 152; s14.s11.n = 151; cout << "enter first card: " << endl; cin >> somthing?//no idea what to put here, but this would somehow //read out the user input (a number from 2 to 14) //and assign it to the corresponding struct cout << firstcard.secondcard.suited_or_not << endl; //this would change depending //on what the user inputs system("Pause"); }

    Read the article

  • Get mutually and non mutually existening Fields in same table in Two columns

    - by ranabra
    This is a question similar to another question I posted here but is a little different. I am trying to get a list of all instances of mutual and non-mutual existing Users. What I mean is that the returned result from the query will return a list of users along with their co-worker. It is similar to the question here, but the difference is that non mutual users will be returned too and with out the "duplicity" mutually existing users return in the list (See image below in-order simplify it all). I took the original answer from Thomas (Thanx again Thomas) Select D1.u_username, U1.Permission, U1.Grade, D1.f_username, U2.Permission, U2.Gradefrom tblDynamicUserList As D1    Join tblDynamicUserList As D2        On D2.u_username = D1.f_username            And D2.f_username = D1.u_username    Join tblUsers As U1        On U1.u_username = D1.u_username    Join tblUsers As U2        On U2.u_username = D2.u_username and after some several trials I commented out 2 lines (Below). The returned result are exactly as described in the beginning of this question, but with the "duplicity" returned by mutually existing users in the table. How can I eliminate this duplicity? Select D1.u_username, U1.Permission, U1.Grade, D1.f_username, U2.Permission, U2.Gradefrom tblDynamicUserList As D1    Join tblDynamicUserList As D2        On D2.u_username = D1.f_username            /* And D2.f_username = D1.u_username */    Join tblUsers As U1        On U1.u_username = D1.u_username    Join tblUsers As U2        On U2.u_username = D2.u_username /* WHERE D1.U_userName < D1.f_username */ *Screenshot that hopefully helps explain it all. Database is SQL 2005. Many thanx in advance

    Read the article

  • Is there a way to delay compilation of a stored procedure's execution plan?

    - by Ian Henry
    (At first glance this may look like a duplicate of http://stackoverflow.com/questions/421275 or http://stackoverflow.com/questions/414336, but my actual question is a bit different) Alright, this one's had me stumped for a few hours. My example here is ridiculously abstracted, so I doubt it will be possible to recreate locally, but it provides context for my question (Also, I'm running SQL Server 2005). I have a stored procedure with basically two steps, constructing a temp table, populating it with very few rows, and then querying a very large table joining against that temp table. It has multiple parameters, but the most relevant is a datetime "@MinDate." Essentially: create table #smallTable (ID int) insert into #smallTable select (a very small number of rows from some other table) select * from aGiantTable inner join #smallTable on #smallTable.ID = aGiantTable.ID inner join anotherTable on anotherTable.GiantID = aGiantTable.ID where aGiantTable.SomeDateField > @MinDate If I just execute this as a normal query, by declaring @MinDate as a local variable and running that, it produces an optimal execution plan that executes very quickly (first joins on #smallTable and then only considers a very small subset of rows from aGiantTable while doing other operations). It seems to realize that #smallTable is tiny, so it would be efficient to start with it. This is good. However, if I make that a stored procedure with @MinDate as a parameter, it produces a completely inefficient execution plan. (I am recompiling it each time, so it's not a bad cached plan...at least, I sure hope it's not) But here's where it gets weird. If I change the proc to the following: declare @LocalMinDate datetime set @LocalMinDate = @MinDate --where @MinDate is still a parameter create table #smallTable (ID int) insert into #smallTable select (a very small number of rows from some other table) select * from aGiantTable inner join #smallTable on #smallTable.ID = aGiantTable.ID inner join anotherTable on anotherTable.GiantID = aGiantTable.ID where aGiantTable.SomeDateField > @LocalMinDate Then it gives me the efficient plan! So my theory is this: when executing as a plain query (not as a stored procedure), it waits to construct the execution plan for the expensive query until the last minute, so the query optimizer knows that #smallTable is small and uses that information to give the efficient plan. But when executing as a stored procedure, it creates the entire execution plan at once, thus it can't use this bit of information to optimize the plan. But why does using the locally declared variables change this? Why does that delay the creation of the execution plan? Is that actually what's happening? If so, is there a way to force delayed compilation (if that indeed is what's going on here) even when not using local variables in this way? More generally, does anyone have sources on when the execution plan is created for each step of a stored procedure? Googling hasn't provided any helpful information, but I don't think I'm looking for the right thing. Or is my theory just completely unfounded? Edit: Since posting, I've learned of parameter sniffing, and I assume this is what's causing the execution plan to compile prematurely (unless stored procedures indeed compile all at once), so my question remains -- can you force the delay? Or disable the sniffing entirely? The question is academic, since I can force a more efficient plan by replacing the select * from aGiantTable with select * from (select * from aGiantTable where ID in (select ID from #smallTable)) as aGiantTable Or just sucking it up and masking the parameters, but still, this inconsistency has me pretty curious.

    Read the article

  • TSQL Conditionally Select Specific Value

    - by Dzejms
    This is a follow-up to #1644748 where I successfully answered my own question, but Quassnoi helped me to realize that it was the wrong question. He gave me a solution that worked for my sample data, but I couldn't plug it back into the parent stored procedure because I fail at SQL 2005 syntax. So here is an attempt to paint the broader picture and ask what I actually need. This is part of a stored procedure that returns a list of items in a bug tracking application I've inherited. There are are over 100 fields and 26 joins so I'm pulling out only the mostly relevant bits. SELECT tickets.ticketid, tickets.tickettype, tickets_tickettype_lu.tickettypedesc, tickets.stage, tickets.position, tickets.sponsor, tickets.dev, tickets.qa, DATEDIFF(DAY, ticket_history_assignment.savedate, GETDATE()) as 'daysinqueue' FROM dbo.tickets WITH (NOLOCK) LEFT OUTER JOIN dbo.tickets_tickettype_lu WITH (NOLOCK) ON tickets.tickettype = tickets_tickettype_lu.tickettypeid LEFT OUTER JOIN dbo.tickets_history_assignment WITH (NOLOCK) ON tickets_history_assignment.ticketid = tickets.ticketid AND tickets_history_assignment.historyid = ( SELECT MAX(historyid) FROM dbo.tickets_history_assignment WITH (NOLOCK) WHERE tickets_history_assignment.ticketid = tickets.ticketid GROUP BY tickets_history_assignment.ticketid ) WHERE tickets.sponsor = @sponsor The area of interest is the daysinqueue subquery mess. The tickets_history_assignment table looks roughly as follows declare @tickets_history_assignment table ( historyid int, ticketid int, sponsor int, dev int, qa int, savedate datetime ) insert into @tickets_history_assignment values (1521402, 92774,20,14, 20, '2009-10-27 09:17:59.527') insert into @tickets_history_assignment values (1521399, 92774,20,14, 42, '2009-08-31 12:07:52.917') insert into @tickets_history_assignment values (1521311, 92774,100,14, 42, '2008-12-08 16:15:49.887') insert into @tickets_history_assignment values (1521336, 92774,100,14, 42, '2009-01-16 14:27:43.577') Whenever a ticket is saved, the current values for sponsor, dev and qa are stored in the tickets_history_assignment table with the ticketid and a timestamp. So it is possible for someone to change the value for qa, but leave sponsor alone. What I want to know, based on all of these conditions, is the historyid of the record in the tickets_history_assignment table where the sponsor value was last changed so that I can calculate the value for daysinqueue. If a record is inserted into the history table, and only the qa value has changed, I don't want that record. So simply relying on MAX(historyid) won't work for me. Quassnoi came up with the following which seemed to work with my sample data, but I can't plug it into the larger query, SQL Manager bitches about the WITH statement. ;WITH rows AS ( SELECT *, ROW_NUMBER() OVER (PARTITION BY ticketid ORDER BY savedate DESC) AS rn FROM @Table ) SELECT rl.sponsor, ro.savedate FROM rows rl CROSS APPLY ( SELECT TOP 1 rc.savedate FROM rows rc JOIN rows rn ON rn.ticketid = rc.ticketid AND rn.rn = rc.rn + 1 AND rn.sponsor <> rc.sponsor WHERE rc.ticketid = rl.ticketid ORDER BY rc.rn ) ro WHERE rl.rn = 1 I played with it yesterday afternoon and got nowhere because I don't fundamentally understand what is going on here and how it should fit into the larger context. So, any takers? UPDATE Ok, here's the whole thing. I've been switching some of the table and column names in an attempt to simplify things so here's the full unedited mess. snip - old bad code Here are the errors: Msg 102, Level 15, State 1, Procedure usp_GetProjectRecordsByAssignment, Line 159 Incorrect syntax near ';'. Msg 102, Level 15, State 1, Procedure usp_GetProjectRecordsByAssignment, Line 179 Incorrect syntax near ')'. Line numbers are of course not correct but refer to ;WITH rows AS And the ')' char after the WHERE rl.rn = 1 ) Respectively Is there a tag for extra super long question? UPDATE #2 Here is the finished query for anyone who may need this: CREATE PROCEDURE [dbo].[usp_GetProjectRecordsByAssignment] ( @assigned numeric(18,0), @assignedtype numeric(18,0) ) AS SET NOCOUNT ON WITH rows AS ( SELECT *, ROW_NUMBER() OVER (PARTITION BY recordid ORDER BY savedate DESC) AS rn FROM projects_history_assignment ) SELECT projects_records.recordid, projects_records.recordtype, projects_recordtype_lu.recordtypedesc, projects_records.stage, projects_stage_lu.stagedesc, projects_records.position, projects_position_lu.positiondesc, CASE projects_records.clientrequested WHEN '1' THEN 'Yes' WHEN '0' THEN 'No' END AS clientrequested, projects_records.reportingmethod, projects_reportingmethod_lu.reportingmethoddesc, projects_records.clientaccess, projects_clientaccess_lu.clientaccessdesc, projects_records.clientnumber, projects_records.project, projects_lu.projectdesc, projects_records.version, projects_version_lu.versiondesc, projects_records.projectedversion, projects_version_lu_projected.versiondesc AS projectedversiondesc, projects_records.sitetype, projects_sitetype_lu.sitetypedesc, projects_records.title, projects_records.module, projects_module_lu.moduledesc, projects_records.component, projects_component_lu.componentdesc, projects_records.loginusername, projects_records.loginpassword, projects_records.assistedusername, projects_records.browsername, projects_browsername_lu.browsernamedesc, projects_records.browserversion, projects_records.osname, projects_osname_lu.osnamedesc, projects_records.osversion, projects_records.errortype, projects_errortype_lu.errortypedesc, projects_records.gsipriority, projects_gsipriority_lu.gsiprioritydesc, projects_records.clientpriority, projects_clientpriority_lu.clientprioritydesc, projects_records.scheduledstartdate, projects_records.scheduledcompletiondate, projects_records.projectedhours, projects_records.actualstartdate, projects_records.actualcompletiondate, projects_records.actualhours, CASE projects_records.billclient WHEN '1' THEN 'Yes' WHEN '0' THEN 'No' END AS billclient, projects_records.billamount, projects_records.status, projects_status_lu.statusdesc, CASE CAST(projects_records.assigned AS VARCHAR(5)) WHEN '0' THEN 'N/A' WHEN '10000' THEN 'Unassigned' WHEN '20000' THEN 'Client' WHEN '30000' THEN 'Tech Support' WHEN '40000' THEN 'LMI Tech Support' WHEN '50000' THEN 'Upload' WHEN '60000' THEN 'Spider' WHEN '70000' THEN 'DB Admin' ELSE rtrim(users_assigned.nickname) + ' ' + rtrim(users_assigned.lastname) END AS assigned, CASE CAST(projects_records.assigneddev AS VARCHAR(5)) WHEN '0' THEN 'N/A' WHEN '10000' THEN 'Unassigned' ELSE rtrim(users_assigneddev.nickname) + ' ' + rtrim(users_assigneddev.lastname) END AS assigneddev, CASE CAST(projects_records.assignedqa AS VARCHAR(5)) WHEN '0' THEN 'N/A' WHEN '10000' THEN 'Unassigned' ELSE rtrim(users_assignedqa.nickname) + ' ' + rtrim(users_assignedqa.lastname) END AS assignedqa, CASE CAST(projects_records.assignedsponsor AS VARCHAR(5)) WHEN '0' THEN 'N/A' WHEN '10000' THEN 'Unassigned' ELSE rtrim(users_assignedsponsor.nickname) + ' ' + rtrim(users_assignedsponsor.lastname) END AS assignedsponsor, projects_records.clientcreated, CASE projects_records.clientcreated WHEN '1' THEN 'Yes' WHEN '0' THEN 'No' END AS clientcreateddesc, CASE projects_records.clientcreated WHEN '1' THEN rtrim(clientusers_createuser.firstname) + ' ' + rtrim(clientusers_createuser.lastname) + ' (Client)' ELSE rtrim(users_createuser.nickname) + ' ' + rtrim(users_createuser.lastname) END AS createuser, projects_records.createdate, projects_records.savedate, projects_resolution.sitesaffected, projects_sitesaffected_lu.sitesaffecteddesc, DATEDIFF(DAY, projects_history_assignment.savedate, GETDATE()) as 'daysinqueue', projects_records.iOnHitList, projects_records.changetype FROM dbo.projects_records WITH (NOLOCK) LEFT OUTER JOIN dbo.projects_recordtype_lu WITH (NOLOCK) ON projects_records.recordtype = projects_recordtype_lu.recordtypeid LEFT OUTER JOIN dbo.projects_stage_lu WITH (NOLOCK) ON projects_records.stage = projects_stage_lu.stageid LEFT OUTER JOIN dbo.projects_position_lu WITH (NOLOCK) ON projects_records.position = projects_position_lu.positionid LEFT OUTER JOIN dbo.projects_reportingmethod_lu WITH (NOLOCK) ON projects_records.reportingmethod = projects_reportingmethod_lu.reportingmethodid LEFT OUTER JOIN dbo.projects_lu WITH (NOLOCK) ON projects_records.project = projects_lu.projectid LEFT OUTER JOIN dbo.projects_version_lu WITH (NOLOCK) ON projects_records.version = projects_version_lu.versionid LEFT OUTER JOIN dbo.projects_version_lu projects_version_lu_projected WITH (NOLOCK) ON projects_records.projectedversion = projects_version_lu_projected.versionid LEFT OUTER JOIN dbo.projects_sitetype_lu WITH (NOLOCK) ON projects_records.sitetype = projects_sitetype_lu.sitetypeid LEFT OUTER JOIN dbo.projects_module_lu WITH (NOLOCK) ON projects_records.module = projects_module_lu.moduleid LEFT OUTER JOIN dbo.projects_component_lu WITH (NOLOCK) ON projects_records.component = projects_component_lu.componentid LEFT OUTER JOIN dbo.projects_browsername_lu WITH (NOLOCK) ON projects_records.browsername = projects_browsername_lu.browsernameid LEFT OUTER JOIN dbo.projects_osname_lu WITH (NOLOCK) ON projects_records.osname = projects_osname_lu.osnameid LEFT OUTER JOIN dbo.projects_errortype_lu WITH (NOLOCK) ON projects_records.errortype = projects_errortype_lu.errortypeid LEFT OUTER JOIN dbo.projects_resolution WITH (NOLOCK) ON projects_records.recordid = projects_resolution.recordid LEFT OUTER JOIN dbo.projects_sitesaffected_lu WITH (NOLOCK) ON projects_resolution.sitesaffected = projects_sitesaffected_lu.sitesaffectedid LEFT OUTER JOIN dbo.projects_gsipriority_lu WITH (NOLOCK) ON projects_records.gsipriority = projects_gsipriority_lu.gsipriorityid LEFT OUTER JOIN dbo.projects_clientpriority_lu WITH (NOLOCK) ON projects_records.clientpriority = projects_clientpriority_lu.clientpriorityid LEFT OUTER JOIN dbo.projects_status_lu WITH (NOLOCK) ON projects_records.status = projects_status_lu.statusid LEFT OUTER JOIN dbo.projects_clientaccess_lu WITH (NOLOCK) ON projects_records.clientaccess = projects_clientaccess_lu.clientaccessid LEFT OUTER JOIN dbo.users users_assigned WITH (NOLOCK) ON projects_records.assigned = users_assigned.userid LEFT OUTER JOIN dbo.users users_assigneddev WITH (NOLOCK) ON projects_records.assigneddev = users_assigneddev.userid LEFT OUTER JOIN dbo.users users_assignedqa WITH (NOLOCK) ON projects_records.assignedqa = users_assignedqa.userid LEFT OUTER JOIN dbo.users users_assignedsponsor WITH (NOLOCK) ON projects_records.assignedsponsor = users_assignedsponsor.userid LEFT OUTER JOIN dbo.users users_createuser WITH (NOLOCK) ON projects_records.createuser = users_createuser.userid LEFT OUTER JOIN dbo.clientusers clientusers_createuser WITH (NOLOCK) ON projects_records.createuser = clientusers_createuser.userid LEFT OUTER JOIN dbo.projects_history_assignment WITH (NOLOCK) ON projects_history_assignment.recordid = projects_records.recordid AND projects_history_assignment.historyid = ( SELECT ro.historyid FROM rows rl CROSS APPLY ( SELECT TOP 1 rc.historyid FROM rows rc JOIN rows rn ON rn.recordid = rc.recordid AND rn.rn = rc.rn + 1 AND rn.assigned <> rc.assigned WHERE rc.recordid = rl.recordid ORDER BY rc.rn ) ro WHERE rl.rn = 1 AND rl.recordid = projects_records.recordid ) WHERE (@assignedtype='0' and projects_records.assigned = @assigned) OR (@assignedtype='1' and projects_records.assigneddev = @assigned) OR (@assignedtype='2' and projects_records.assignedqa = @assigned) OR (@assignedtype='3' and projects_records.assignedsponsor = @assigned) OR (@assignedtype='4' and projects_records.createuser = @assigned)

    Read the article

  • Combine config-paramters with parameters passed from commanline

    - by Frederik
    I have created a SSIS-package that imports a file into a table (simple enough). I have some variables, a few set in a config-file such as server, database, importfolder. at runtime I want to pass the filename. This is done through a stored procedure using dtexec. When setting the paramters throught the configfile it works fine also when setting all parameters in the procedure and passing them with the \Set statement (se below). when I try to combine the config-version with settings parameters on the fly I get an error refering to the config-files path that was set at design time. Has anybody come across this and found a solution for it? Regards Frederik DECLARE @SSISSTR VARCHAR(8000), @DataBaseServer VARCHAR(100), @DataBaseName VARCHAR(100), @PackageFilePath VARCHAR(200), @ImportFolder VARCHAR(200), @HandledFolder VARCHAR(200), @ConfigFilePath VARCHAR(200), @SSISreturncode INT; /* DEBUGGING DECLARE @FileName VARCHAR(100), @SelectionId INT SET @FileName = 'Test.csv'; SET @SelectionId = 366; */ SET @PackageFilePath = '/FILE "Y:\SSIS\Packages\PostalCodeSelectionImport\ImportPackage.dtsx" '; SET @DataBaseServer = 'STOSWVUTVDB01\DEV_BSE'; SET @DataBaseName = 'BSE_ODR'; SET @ImportFolder = '\\Stoswvutvbse01\Application\FileLoadArea\ODR\\'; SET @HandledFolder = '\\Stoswvutvbse01\Application\FileLoadArea\ODR\Handled\\'; --SET @ConfigFilePath = '/CONFIGFILE "Y:\SSIS\Packages\PostalCodeSelectionImport\Configuration\DEV_BSE.dtsConfig" '; ----now making "dtexec" SQL from dynamic values SET @SSISSTR = 'DTEXEC ' + @PackageFilePath; -- + @ConfigFilePath; SET @SSISSTR = @SSISSTR + ' /SET \Package.Variables[User::SelectionId].Properties[Value];' + CAST( @SelectionId AS VARCHAR(12)); SET @SSISSTR = @SSISSTR + ' /SET \Package.Variables[User::DataBaseServer].Properties[Value];"' + @DataBaseServer + '"'; SET @SSISSTR = @SSISSTR + ' /SET \Package.Variables[User::ImportFolder].Properties[Value];"' + @ImportFolder + '" '; SET @SSISSTR = @SSISSTR + ' /SET \Package.Variables[User::DataBaseName].Properties[Value];"' + @DataBaseName + '" '; SET @SSISSTR = @SSISSTR + ' /SET \Package.Variables[User::ImportFileName].Properties[Value];"' + @FileName + '" '; SET @SSISSTR = @SSISSTR + ' /SET \Package.Variables[User::HandledFolder].Properties[Value];"' + @HandledFolder + '" '; -- Now execute dynamic SQL by using EXEC. EXEC @SSISreturncode = xp_cmdshell @SSISSTR;

    Read the article

  • What does error 0xC02020C4 mean in SSIS?

    I get this error with this description. Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

    Read the article

  • Sounds for build error/success in Visual C++?

    - by jwfearn
    On long Visual C++ builds, it would be really helpful to hear some sort of (optional) sounds for such build/compile results as: individual compile error file compile success/failure build success/failure batch build success/failure Does anyone know how to enable sounds for these kinds of build occurrences in Visual C++ (especially Visual C++ 2008 on Vista)?

    Read the article

  • Dataset.ReadXml() - Invalid character in the given encoding

    - by NLV
    Hello all I have saved a dataset in the sql database in an xml column using the following code. XmlDataDocument dd = new XmlDataDocument(dataset); and passing this xml document as sql parameter using param.value = new XmlNodeReader(dd); The XML is like <NewDataSet><SubContractChangeOrders><AGCol>1</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>006</Contract_x0020_Number><ContractID>30</ContractID><ChangeOrderID>211</ChangeOrderID><Amount>0.0000</Amount><Udf_CostReimbursableFlag>false</Udf_CostReimbursableFlag><Udf_CustomerCode /><Udf_SubChangeOrderStatus /></SubContractChangeOrders><SubContractChangeOrders><AGCol>2</AGCol><SCO_x0020_Number>002</SCO_x0020_Number><Contract_x0020_Number>006</Contract_x0020_Number><ContractID>30</ContractID><ChangeOrderID>212</ChangeOrderID><Amount>0.0000</Amount><Udf_CostReimbursableFlag>false</Udf_CostReimbursableFlag></SubContractChangeOrders><SubContractChangeOrders><AGCol>3</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>111</Contract_x0020_Number><ContractID>87</ContractID><ChangeOrderID>12</ChangeOrderID><Amount>300.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>4</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>222</Contract_x0020_Number><ContractID>80</ContractID><ChangeOrderID>6</ChangeOrderID><Amount>100.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>5</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>777</Contract_x0020_Number><ContractID>79</ContractID><ChangeOrderID>5</ChangeOrderID><Amount>200.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>6</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>786</Contract_x0020_Number><ContractID>77</ContractID><ChangeOrderID>3</ChangeOrderID><Amount>100.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>7</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>787</Contract_x0020_Number><ContractID>78</ContractID><ChangeOrderID>4</ChangeOrderID><Amount>500.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>8</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 009</Contract_x0020_Number><ContractID>219</ContractID><ChangeOrderID>78</ChangeOrderID><Amount>9000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>9</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 010</Contract_x0020_Number><ContractID>220</ContractID><ChangeOrderID>79</ChangeOrderID><Amount>13000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>10</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 012</Contract_x0020_Number><ContractID>222</ContractID><ChangeOrderID>83</ChangeOrderID><Amount>2300.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>11</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 020</Contract_x0020_Number><ContractID>226</ContractID><ChangeOrderID>86</ChangeOrderID><Amount>5400.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>12</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 021</Contract_x0020_Number><ContractID>227</ContractID><ChangeOrderID>87</ChangeOrderID><Amount>2300.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>13</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con001</Contract_x0020_Number><ContractID>208</ContractID><ChangeOrderID>72</ChangeOrderID><Amount>3000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>14</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con002</Contract_x0020_Number><ContractID>209</ContractID><ChangeOrderID>73</ChangeOrderID><Amount>400.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>15</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con003</Contract_x0020_Number><ContractID>210</ContractID><ChangeOrderID>74</ChangeOrderID><Amount>6000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>16</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con004</Contract_x0020_Number><ContractID>211</ContractID><ChangeOrderID>75</ChangeOrderID><Amount>9000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>17</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con005</Contract_x0020_Number><ContractID>213</ContractID><ChangeOrderID>76</ChangeOrderID><Amount>17000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>18</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Cont001</Contract_x0020_Number><ContractID>228</ContractID><ChangeOrderID>89</ChangeOrderID><Amount>2000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>19</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>PUR001</Contract_x0020_Number><ContractID>229</ContractID><ChangeOrderID>88</ChangeOrderID><Amount>1000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>20</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>PUR002</Contract_x0020_Number><ContractID>230</ContractID><ChangeOrderID>90</ChangeOrderID><Amount>3000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>21</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>SC-002</Contract_x0020_Number><ContractID>2</ContractID><ChangeOrderID>7</ChangeOrderID><Amount>200.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>22</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>SC-004</Contract_x0020_Number><ContractID>7</ContractID><ChangeOrderID>65</ChangeOrderID><Amount>1000.0000</Amount></SubContractChangeOrders></NewDataSet> I'm trying to read it back as follows using (SqlConnection con = new SqlConnection("Server=#####;Initial Catalog=#####;User ID=####;Pwd=########")) { using (SqlCommand com = new SqlCommand("select * from dbo.tbl_#####", con)) { using (SqlDataAdapter ada = new SqlDataAdapter(com)) { ada.Fill(dt); MemoryStream ms = new MemoryStream(); object contractXML1 = dt.Rows[0]["SCOXML1"]; System.Runtime.Serialization.Formatters.Binary.BinaryFormatter bf = new System.Runtime.Serialization.Formatters.Binary.BinaryFormatter(); bf.Serialize(ms, contractXML1); ms.Seek(0, SeekOrigin.Begin); ds.ReadXml(ms); } } } I'm getting the following error Data at the root level is invalid. Line 1, position 6. Any ideas? NLV

    Read the article

  • Mouse Event BHO

    - by shaimagz
    I want my BHO to listen to onmousedown event of some element in a certain webpage. I have all the code that find the specific element, and in msdn its says that I need to use the get_onmousedown event. I came up with this code. CComQIPtr<IHTMLElement> someElement; VARIANT mouse_eve; someElement->get_onmousedown(&mouse_eve); The question is, how do I tell it to run some function when this event occurs?

    Read the article

  • Login failed for user 'DOMAIN\MACHINENAME$'

    - by sah302
    I know this is almost duplicate of : http://stackoverflow.com/questions/1269706/the-error-login-failed-for-user-nt-authority-iusr-in-asp-net-and-sql-server-2 and http://stackoverflow.com/questions/97594/login-failed-for-user-username-system-data-sqlclient-sqlexception-with-linq-i but some things don't add up compared to other appliations on my server and I am not sure why. Boxes being used: Web Box SQL Box SQL Test Box My Application: I've got aASP.NET Web Application, which references a class library that uses LINQ-to-SQL. Connection string set up properly in the class library. As per http://stackoverflow.com/questions/97594/login-failed-for-user-username-system-data-sqlclient-sqlexception-with-linq-i I also added this connection string to the Web Application. The connection string uses SQL credentials as so (in both web app and class library): <add name="Namespace.My.MySettings.ConnectionStringProduction" connectionString="Data Source=(SQL Test Box);Initial Catalog=(db name);Persist Security Info=True;User ID=ID;Password=Password" providerName="System.Data.SqlClient" /> This connection confirmed as working via adding it to server explorer. This is the connection string my .dbml file is using. The problem: I get the following error: System.Data.SqlClient.SqlException: Login failed for user 'DOMAIN\MACHINENAME$'. Now referencing this http://stackoverflow.com/questions/1269706/the-error-login-failed-for-user-nt-authority-iusr-in-asp-net-and-sql-server-2 it says that's really the local network service and using any other non-domain name will not work. But I am confused because I've checked both SQL Box and SQL Test Box SQL Management Studio and both have NT AUTHORITY/NETWORK SERVICE under Security - Logins, at the database level, that isn't listed under Security - Users, but at the database level Security - Users I have the user displayed in the connection string. At NTFS level on web server, the permissions have NETWORK SERVICE has full control. The reason why I am confused is because I have many other web applications on my Web Server, that reference databases on both SQL Box and SQL Test Box, and they all work. But I cannot find a difference between them and my current application, other than I am using a class library. Will that matter? Checking NTFS permissions, setup of Security Logins at the server and databases levels, connection string and method of connecting (SQL Server credentials), and IIS application pool and other folder options, are all the same. Why do these applications work without adding the machinename$ to the permissions of either of my SQL boxes? But that is what the one link is telling me to do to fix this problem.

    Read the article

  • Sharepoint/WSS Reporting Services Integration woes

    - by mhollers
    after a number of failed attempts i seem to have successfully installed the Reporting services add-in to my WSS farm. However, I seem to be missing most of the enhanced functionality eg no report library template, no report center site template. the only additional functionality available is the report viewer web part. background: 2 server WSS 3.0 farm with CA (Central admin) WFE (web front end) and reporting services addin installed on 1, and SQL05 SP2 with Reporting services (RS) and all databases installed on other. I have a VM environment set up and have rolled this back and repeated a number of times. I have configured RS within CA and activated 'Report Server INtegration Feature'. Within the 'site settings' I have a 'Reporting Services' heading with a 'manage shared schedules' item/link, not sure if there should be other options? I was of the understanding that to view reports within sharepoint i could either create a new site using the 'report center' template or add a report library to an existing site, neither of which seems available I am at a loss as to what to do, as all online information seems to do with dealing with installation issues/errors, which i seem to have eventually got past

    Read the article

  • SQL Server add primary key

    - by Paul
    I have a table that needs to be given a new primary key, as my predecesor used a varchar(8) row as the primary key, and we are having problems with it now. I know how to add the primary key, but am not sure of the correct way to add this new primary key to other tables that have the foreign key. Here is what I have: users table: old_user_id varchar(8) ... ... new_user_id int(11) orders table: order_id int(11) ... ... old_user_fk varchar(8) new_user_fk int(11) I need to get the same results whether I join the tables on users.old_user_id=orders.old_user_fk or users.new_user_id=orders.new_user_fk. Any help is appreciated.

    Read the article

  • SQL Reporting Services - Subreports Broken into multiple columns

    - by devin
    Hi, I inherited an SQL Reporting Services .rdl project from somebody and need help fixing some functionality. In each row of the report, there is a subreport. In order to save space the subreport is divided into 3. Such that in each row of the report, it splits the data of the subreport into 3 smaller tables. Right now, it fills these 3 subreports horizontally. (ie. if the result has 9 values, the first subtable will have 1, 4 & 7, the second subtable will have 2, 5 & 8, etc) Is there a way to have it fill the subtables vertically? (ie. the first subtable would have 1,2 & 3) Thanks!

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >