Search Results

Search found 3973 results on 159 pages for 'boost filesystem'.

Page 62/159 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Recover RAID 5 data after created new array instead of re-using

  - by Brigadieren

  Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

  Read the article

• How do I enable write access for an sFTP only user under Ubuntu?

  - by Jon Cage

  I'm running Ubuntu 12.04 and am trying to configure a user to allow chroot'd sFTP connections to another section of the filesystem. I've added the following to my /etc/ssh/sshd_config file: Match Group mygroup X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp ChrootDirectory /home/%u I've set their home directory so that it's owned by root but has their group. I've created a mount --bind from /home/myuser/transfers to /my/filesystem which appears to be navigable. The problem I'm having is that I'm not able to write to any part of the filesystem which makes this pretty useless as an FTP server. What am I missing? What can I check?

  Read the article

• How to copy directories using debugfs?

  - by STM

  The debugfs manpage gives the impression that the command 'rdump . .' will recursively copy all files found on the specified filesystem from the debugfs cwd to the native filesystem's cwd. Instead I seem to receive a syntax error, and no copy is initiated? These are the commands I run: cd /path/to/transfer/destination debugfs /dev/sda1 -R rdump . . My task is to copy the entire contents of a clean yet unmountable USB storage device to its host machine's HD. The host machine does not support the inode size used by the USB device's filesystem (256) and its software is not upgradeable, so my intention was to use debugfs to transfer the files. If anyone has any other suggestions for this task I'd be grateful.

  Read the article

• Windows 2008 as home file server and more

  - by Christian W

  I currently have a freenas-unit as a NAS, and a Win2k8R2-unit as server. However I would like to consolidate these to units in one. What I really like about the freenas-unit is the ZFS filesystem. And the only reason I care about the ZFS filesystem is the easy way I can grow an existing filesystem just by inserting a new drive. How would this work in Win2k8? If I setup my unit with a separate drive as C: and a 1TB drive as D:. The D: would then be segmented into d:\Videos d:\Music d:\Pictures. When everything gets close to filling the storage-drive, I would like to expand the storage, but I wouldn't want to have E:\Videos or d:\Videos2 (using the NTFS folder mount thingy). I still want all my Videos to reside in D:\Videos and I want the OS to decide which drive it's going to be stored on... Some kind of on-the-fly jbod expansion :) Is this at all possible in Windows 2008?

  Read the article

• Calculate minimum ext3 partition size for certain amount of data

  - by Daniel Beck

  These following ext3 partitions contain identical data. As we can see, the larger the partition size, the more space is required for the same files: Filesystem 1K-blocks Used Available Use% Mounted on /dev/loop11 3965777 561064 3199964 15% [...] /dev/loop19 573029 543843 29186 95% [...] Filesystem Size Used Avail Use% Mounted on /dev/loop11 3.8G 548M 3.1G 15% [...] /dev/loop19 560M 532M 29M 95% [...] Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop11 1024000 1656 1022344 1% [...] /dev/loop19 1024000 1656 1022344 1% [...] I start with a partition of fixed size that possibly wasted a lot of space and I want to create a partition that is able to hold that data but with (almost) minimal size. How can I reliably calculate that minimal partition size needed for storing a certain amount of data? The amount of data changes over time, and I need to automate these calculations.

  Read the article

• Trigger ZFS dedup one-off scan/rededup

  - by Jake Wharton

  I have a ZFS filesystems which has been running for some time and I recently had the opportunity to upgrade it (finally!) to the latest ZSF version. Our data doesn't scream dedup but I firmly believe based on small tests that we could gain anywhere from 5-10% of our space back for free by utilizing it. I have enabled dedup on the filesystem and new files are slowly being dedupified but the majority (95%+) of our data already exists on the filesystem. Short of moving the data off-pool and then recopying it back, is there any way to trigger a dedup scan of existing data? It doesn't have to be asynchronous or live. (And FYI there isn't enough room on the pool to copy the entire filesystem to another and then just switch the mounts.)

  Read the article

• Ubuntu - How to automount an external drive at a preconfigured mount point?

  - by Lars Haugseth

  Normally, when I attach an external USB drive to my Ubuntu system, the filesystem on it are automounted to /media/label. However, I'd like the filesystem to be mounted at a mount point of my choosing. I've added a line like this to my /etc/fstab: UUID=2BE905C238C1F724 /p ntfs-3g defaults 0 0 # Passport 320GB This allows me to manually mount the volume at /p by running sudo mount /p, however the filesystem is no longer automounted when the drive is attached to the PC. What do I need to do to get automount to this mount point to work, if at all possible?

  Read the article

• Trigger ZFS dedup one-off scan/rededup

  - by Jake Wharton

  I have a ZFS filesystems which has been running for some time and I recently had the opportunity to upgrade it (finally!) to the latest ZFS version. Our data doesn't scream dedup but I firmly believe based on small tests that we could gain anywhere from 5-10% of our space back for free by utilizing it. I have enabled dedup on the filesystem and new files are slowly being dedupified but the majority (95%+) of our data already exists on the filesystem. Short of moving the data off-pool and then recopying it back, is there any way to trigger a dedup scan of existing data? It doesn't have to be asynchronous or live. (And FYI there isn't enough room on the pool to copy the entire filesystem to another and then just switch the mounts.)

  Read the article

• running a web server with encrypted file system (all or part of it)

  - by Carlos

  Hi, I need a webserver (lamp) running inside a virtual machine (#1) running as a service (#2) in headless mode (#3) with part or the whole filesystem encrypted (#4). The virtual machine will be started with no user intervention and provide access to a web application for users in the host machine. Points #1,#2 and #3 are checked and proved to be working fine with Sun VirtualBox, so my question is for #4: Can I encrypt the all filesystem and still access the webserver (using a browser) or will grub ask me for a password? If encrypting the all filesystem is not an option, can I encrypt only /home and /var/www ? will apache/php be able to use files in /home or /var/www without asking for a password or mounting these partitions manually? Thanks

  Read the article

• mysql 5.0.23 vs 5.5 performance benefits and upgrade issues?

  - by WarDoGG

  I have been told that mysql 5.5 has a significant performance boost compared to 5.0 Our server handles a lot of data (around 30 million records processed per 5-10 seconds) and requires every drop of performance boost we can give. Will it be beneficial if we upgrade from 5.0.23 to mysql 5.5? Also, we have lots of database indexes setup on the tables and I've been told that sometimes the indexes become corrupt after a version upgrade and they have to be rebuilt. Is this true?

  Read the article

• Slow speed for UFS mounted drive in Linux

  - by Incredible

  Hi, I have a disk that has Sun OS disk, (ufs filesystem). And I want to mount it in my debain machine with read/write mode. Since by deafult linux doesn't support write to ufs filesystem. I had to recompile the kernel by setting to the flag CONFIG_UFS_FS_WRITE=y. Now I am able to write to the filesystem, but the read/write speed is very slow. It is around 120 KB/s. Any idea what is wrong and how to resolve this issue? Thank you in advance.

  Read the article

• Is there good FAT driver for FUSE? (Lightweight, not mountlo)

  - by Vi.

  FUSE filesystem list show some FuseFat and FatFuse. Both are old, FatFuse is read-only , FuseFat is non-buildable and probably depends on glib. Now I'm using mountlo for the task (mounting USB drives in generic way without root access or suid things (except of fusermount itself)), but it looks too big for such task. Using FUSE to mount external storage devices is good both for security and for flexibility reason: the kernel sees only block reads and writes while actual code that deals with filesystem details runs with user privileges, allowing user to use custom filesystems and preventing from kernel filesystem exploits. Is there good vfat FUSE driver?

  Read the article

• HTML5Rocks Live, Episode 1

  HTML5Rocks Live, Episode 1 In this episode of HTML5Rocks Live, Boris, Eric and Paul join us to show some great new libraries and performance tips. Please leave your comments on our plus page at goo.gl In the first chapter, Paul shows how to use some of Chrome's new developer tools to understand how things are rendering and get improved performance. In the second chapter (21:25), Boris shows off his new device.js library to help make development of mobile web applications and sites easier. Eric closes the hangout (40:00) and talks about his new file system API polyfill that uses indexed db as it's back end. 02:15 Scroll Effects Demo goo.gl 23:04 - Media Queries Site goo.gl 24:15 - WURFL goo.gl 26:40 - Boris' Device Library goo.gl 29:28 - Device.js Demo goo.gl 33:25 - Bug to add touch-enabled media query to Chrome, please star goo.gl 35:00 - Chrome's DevTools for Mobile Development 38:56 - Paul Irish's Touch Demos goo.gl 40:43 - File System API Book goo.gl 43:10 - Eric's idb.filesystem.js goo.gl 44:27 - idb.filesystem HTML5 File System Demo goo.gl 47:33 - HTML5 Filesystem Playground goo.gl From: GoogleDevelopers Views: 12239 221 ratings Time: 52:29 More in Science & Technology

  Read the article

• I'm trying to install VMWare tools on Ubuntu 12.04.2 LTS and I seem to have a problem with Kernel headers

  - by Pedro Irusta

  I have Ubuntu 12.04.2 LTS installed on a VMware machine on Windows 7 host. I seem to have a problem with Kernel headers when trying to install them I did: sudo apt-get install gcc make build-essential linux-headers-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done gcc is already the newest version. build-essential is already the newest version. linux-headers-3.5.0-28-generic is already the newest version. make is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 100 not upgraded. However, when installing VMware tools I get the following error: make[1]: Entering directory `/usr/src/linux-headers-3.5.0-28-generic' CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoor.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoorGcc32.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/bdhandler.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpName.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLinux.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLite.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/dentry.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/dir.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/file.o /tmp/vmware-root/modules/vmhgfs-only/file.c:122:4: warning: initialization from incompatible pointer type [enabled by default] /tmp/vmware-root/modules/vmhgfs-only/file.c:122:4: warning: (near initialization for ‘HgfsFileFileOperations.fsync’) [enabled by default] CC [M] /tmp/vmware-root/modules/vmhgfs-only/filesystem.o /tmp/vmware-root/modules/vmhgfs-only/filesystem.c:48:28: fatal error: linux/smp_lock.h: No such file or directory compilation terminated. make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/filesystem.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-28-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' Any help appreciated!

  Read the article

• Missing Operating System after trying to upgrade to Ubuntu 11

  - by Mauricio

  there! After trying to upgrade from Ubuntu 10.04 to 11, the upgrading process stopped when running and then I got an "out of disk, grub rescue" message when booting. After running Boot Repair, I got this results. Now I get "Missing Operating System" whent trying to boot. Bellow I show some results from some commands I gather from help foruns, but I still reached no solution. Could you please help me? Any enlightment will be very helpful! Disk Utility says "Disk has a few bad sectors". When trying to run the Self-test I get "FAILED (Read)" Here we have what Gparted says about the /dev/sda1 partition (ext4): Flags: boot Status: not mounted Warning: e2label: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1Couldn`t find valid filesystem superblockUnable to read the contents of this filesystem! From sudo fdisk -lI got: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x000e0596 Device Boot Start End Blocks Id System/dev/sda1 * 2048 607428607 303713280 83 Linux/dev/sda2 607430654 625141759 8855553 5 Extended/dev/sda5 607430656 625141759 8855552 82 Linux swap / SolarisDisk /dev/sdb: 320.1 GB, 320072933376 bytes255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c3c41 Device Boot Start End Blocks Id System /dev/sdb1 * 63 625137344 312568641 c W95 FAT32 (LBA) " and fromsudo fdisk /dev/sda1I got fdisk: unable to read /dev/sda1: Inappropriate ioctl for device` From sudo mount /dev/sda1 /mntI got: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so From sudo update-grubI got: error: cannot read from `/dev/sda'. /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).

  Read the article

• Recovering from 'grub rescue>' crash

  - by DocSalvage

  I did a dumb thing... I forgot that Ubuntu 10.04 (Lucid) switched to Grub2 which puts a ton of *.mod files (kernel modules) in /boot/grub. I thought they were soundtrack files put there erroneously and moved them. Needless to say, the next reboot was traumatic. I was presented with something I had no memory of ever seeing... a 'grub rescue' prompt. With the help of how-to-fix-error-unknown-filesystem-grub-rescue however, I was able to recover... Discovered that Grub Rescue does not have 'cd', 'cp' or any other filesystem commands except its own variation of 'ls'. So first I had to find the partition with the /boot directory containing vmlinuz... and other boot image files... (failed attempts not shown) grub rescue> ls (hd0,4) (hd0,3) (hd0,2) (hd0,1) grub rescue> ls (hd0,2)/boot ... grub ... initrd.img-2.6.32-33-generic ... vmlinuz-2.6.32-33-generic Then manually boot from 'grub rescue' prompt (no command history either!)... grub rescue> set root=(hd0,2)/boot grub rescue> insmod linux grub rescue> linux (hd0,2)/boot/vmlinuz-2.6.32-33-generic grub rescue> initrd (hd0,2)/boot/initrd.img-2.6.32-33-generic grub rescue> boot This boots and crashes to the BusyBox prompt which DOES have some rudimentary filesystem commnds. Then I moved the *.mod files back to the /boot/grub directory... busybox> cd /boot busybox> mv mod/* grub busybox> reboot The reboot was successful but that was a lot of work. Is there an easier way?

  Read the article

• Why does 12.04 upgrade abort with out of space error when I have lots of it?

  - by Kristian Thomsen

  When upgrading Ubuntu from 11.10 to 12.04 I discovered an unexpected problem. The upgrade was stopped because there wasn't enough free space for the installation. I managed to free some space and do the upgrade but now a prompt appears after logging in saying I'm out of space. This prompt asks me if I want to examine the problem. The "Disk Usage Analyser" is opened. In the top it says: Total filesystem capacity: 47.0 GB (used: 13.5 GB available: 33.4 GB) Folder -- Usage -- Size / -- 100% -- 12.5 GB usr -- 44.8 % -- 5.6 GB home -- 30.3 % -- 3.8 GB lib -- 13.0 % -- 1.6 GB var -- 9.1 % -- 1.1 GB boot 2.5 % 309.5 GB and a lot of small contributors like: etc, opt, sbin, bin etc. I do not really understand this problem since the analyser in the top says that I have 33.4 GB left in this file system. What can I do to make Ubuntu use the remaining space? Running df -i in the terminal gives: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda7 610800 576874 33926 95% / udev 213451 563 212888 1% /dev tmpfs 218524 486 218038 1% /run none 218524 3 218521 1% /run/lock none 218524 7 218517 1% /run/shm /dev/sda8 2264752 16371 2248381 1% /home The output of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda7 9,3G 7,8G 1,1G 88% / udev 993M 4,0K 993M 1% /dev tmpfs 401M 884K 400M 1% /run none 5,0M 0 5,0M 0% /run/lock none 1003M 152K 1002M 1% /run/shm /dev/sda8 35G 4,0G 29G 13% /home /dev/sda2 101G 64G 37G 64% /media/A2C8E28BC8E25CD3 Running sudo fdisk -l gives Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 63 96389 48163+ de Dell Utility /dev/sda2 * 98304 210434488 105168092+ 7 HPFS/NTFS/exFAT /dev/sda3 210436094 312576704 51070305+ f W95 Ext'd (LBA) /dev/sda5 306279288 312576704 3148708+ dd Unknown /dev/sda6 210436096 214341631 1952768 82 Linux swap / Solaris /dev/sda7 214343680 233873407 9764864 83 Linux /dev/sda8 233875456 306278399 36201472 83 Linux Partition table entries are not in disk order

  Read the article

• usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

  - by Sandro Dzneladze

  I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

  Read the article

• CMake missing environment variables errors

  - by Ben Crowhurst

  Hello, I'm attempting to use cmake on Mac OSX i've installed both a binary version and then also from source. However i continue to receive the following errors when attempting to create a Makefile. cpc1-dumb4-2-0-cust166:build bcrowhurst$ cmake . CMake Error: Error required internal CMake variable not set, cmake may be not be built correctly. Missing variable is: CMAKE_On_COMPILER_ENV_VAR CMake Error: Error required internal CMake variable not set, cmake may be not be built correctly. Missing variable is: CMAKE_On_COMPILER CMake Error: Could not find cmake module file:/Users/bcrowhurst/NetBeansProjects/appon/build/CMakeFiles/CMakeOnCompiler.cmake CMake Error: Could not find cmake module file:CMakeOnInformation.cmake CMake Error: CMAKE_On_COMPILER not set, after EnableLanguage -- Boost version: 1.43.0 -- Found the following Boost libraries: -- system -- Configuring incomplete, errors occurred! My CMakeLists.txt is as follows: cmake_minimum_required( VERSION 2.6 ) project( Application On ) find_package( Boost COMPONENTS system REQUIRED ) link_directories( ${Boost_LIBRARY_DIRS} ) if(Boost_FOUND) include_directories( ${Boost_INCLUDE_DIRS} ) add_library( object ../source/object.cpp ../source/object.h ) target_link_libraries( object ${Boost_SYSTEM_LIBRARY} ) endif() Any help would be greatly appreciated. Thanks.

  Read the article

• Start Codeblocks project from external code

  - by Dnaiel

  I have C++ code that depends on boost and other libraries, and therefore this code has a makefile that invokes boost. I am now trying to start developing this code in codeblocks in linux, so in order to do that I have two basic questions: (1) How can I import the code into codeblocks as a codeblocks new project? (2) How do I invoke the makefile with codeblocks instead of codeblocks trying to compile the code (which it would fail since codeblocks does not know that it needs to invoke boost). Sorry if it's too basic but I am quite new to C++ and codeblocks. Thanks!

  Read the article

• VC7.1 C1204 internal compiler error

  - by Nathan Ernst

  I'm working on modifying Firaxis' Civilization 4 core game DLL. The host application is built using VC7, hence the constraint (source not provided for the host EXE). I've been working on rewriting a large chunk of the code (focusing on low-hanging performance issues & memory leaks). I recently ran into an internal compiler error when trying to mod the code to use an array class instead of dynamically allocated 2-d arrays, I was going to use matrices from the boost lib (Civ4 is already using boost, so why not?). Basically, the issue comes down to: if I include "boost/numeric/ublas/matrix.hpp", I run into an internal compiler error C1204. MSDN has this to say: MSDN C1204 KB has this to say: KB 883655 So, I'm curious, is it possible to solve this error without a KB/SP being applied and dramatically reducing the complexity of the code? Additionally, as VC7 is no longer "supported", does anyone have a valid (supported) link for a VC7 service pack?

  Read the article

• identifying the type

  - by Gokul

  Hi, In my application, there is a inheritance hierarchy in which only the classes that are at the end of the inheritance chain are non-abstract classes. Also there is some usage of boost::variant. I want to write a function which takes a pointer and a Type and says whether the object belongs to that type. For example template< typename Type, bool TypeisAbstract, typename ptrType > bool checkType( ptrType* t) { return ( typeid(*t) == typeid(Type) ); } template< typename Type, typename ptrType > bool checkType<Type, true, ptrType>( ptrType* t) { return ( dynamic_cast<Type*>(t) != NULL ); } Now if there is a boost variant, i want to find out whether the boost variant stores that particular type. Can someone help me with that? Thanks, Gokul.

  Read the article

• Subversion: Ignore a Directory in the Repo on Commit

  - by Charles

  I have all the boost header files in this repository and when I do a check in it takes a really long time to scan all those files that will never change. Because I want users that checkout the project to be able to compile without installing boost I am in a pickle. I want to checkout everything, and then ignore updates (there will never be any) on a directory. Tortoise svn has a ignore-on-commit change list, but I cannot find anyway to add an entire directory to this list, and I do not fancy the idea of 'modifying' all the boost files so I can add them to this change list. Is there a simple solution?

  Read the article

• CRT not initialized

  - by jfhs

  I'm trying to compile one project with MSVC 2010, compilation is ok, but when I try to run the app, it gives me CRT not initialized error. It is a console application, so I tried to specify mainCRTStartup as Entry Point, but it didn't help. In the same solution there are other projects, and they don't have such a problem. The difference which I see between them is that one which is not working, uses boost. Boost v1.38.0 if this is important. Runtime Library is Multi-threaded DLL. Linker command line is: /OUT:"D:\temp\ghost\Release\ghost.exe" /INCREMENTAL:NO /NOLOGO /LIBPATH:"..\zlib\lib" /LIBPATH:"..\mysql\lib\opt" /LIBPATH:"..\boost\lib" "ws2_32.lib" "winmm.lib" "zdll.lib" "StormLibRAS.lib" "kernel32.lib" "user32.lib" "gdi32.lib" "winspool.lib" "comdlg32.lib" "advapi32.lib" "shell32.lib" "ole32.lib" "oleaut32.lib" "uuid.lib" "odbc32.lib" "odbccp32.lib" "D:\temp\ghost\bncsutil\vc8_build\Release\BNCSutil.lib" /MANIFEST /ManifestFile:"Release\ghost.exe.intermediate.manifest" /ALLOWISOLATION /MANIFESTUAC:"level='asInvoker' uiAccess='false'" /DEBUG /PDB:"D:\temp\ghost\Release\ghost.pdb" /SUBSYSTEM:CONSOLE /OPT:REF /OPT:ICF /PGD:"D:\temp\ghost\Release\ghost.pgd" /LTCG /TLBID:1 /ENTRY:"mainCRTStartup" /DYNAMICBASE /NXCOMPAT /MACHINE:X86 /ERRORREPORT:QUEUE

  Read the article

• C++ static classes & shared_ptr memory leaks

  - by HardCoder1986

  Hello! I can't understand why does the following code produce memory leaks (I am using boost::shared_ptr with static class instance). Could someone help me? #include <crtdbg.h> #include <boost/shared_ptr.hpp> using boost::shared_ptr; #define _CRTDBG_MAP_ALLOC #define NEW new(_NORMAL_BLOCK, __FILE__, __LINE__) static struct myclass { static shared_ptr<int> ptr; myclass() { ptr = shared_ptr<int>(NEW int); } } myclass_instance; shared_ptr<int> myclass::ptr; int main() { _CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF | _CRTDBG_CHECK_ALWAYS_DF | _CrtSetDbgFlag(_CRTDBG_REPORT_FLAG)); return 0; }

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >