Search Results

Search found 17063 results on 683 pages for 'frank computer'.

Page 62/683 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • Favorite workaround or solution ?

    - by UK
    Everyday we used to get some problems with softwares/hardware and it can be classified into different categories.Sometimes we find a solution or perfect workarounds for those problems. What is your favorite workaround that you have found ? Please don't post any Illegal Warez /Software Cracks One Answer per post.

    Read the article

  • explanation of RAM specs, and what do I need for a Gaming rig

    - by ewok
    I am looking into upgrading my custom built PC's RAM. I use the machine mostly for gaming, but I don't really know a ton about RAM, so I wanted to ask a few questions. The research I've done tells me there is a negligible increase in speed for anything above 1600 MHz. is this true or is it worth the extra money to go higher? Other than drawing more power from the PSU, is there any real difference in performance with different voltages (1.5V vs 1.65V)? most of the kits I've found in the 2x4 1600 range have a CAS latency of 9 and timing of 9-9-9-24. For a significant increase in price (usually about 1.5x), I can get either 8 or 7 and lower timing. Is it worth the cost? What I am looking for here is someone to give a good explanation of what the different specs represent, and how that relates to the performance of the machine. Specifically, I'm looking for what specs I need to focus on for a good gaming rig. I am NOT looking for a "buy this, it's the best RAM" without an explanation of why. The information will be much more valuable as it will allow me to make my own informed decision. As they say, give a man a fish, he'll eat for a day. teach a man to fish, and he'll eat for the rest of his life.

    Read the article

  • Could I replace a stock PSU fan with a more quiet one?

    - by GaryJL
    I have a cheap 450W PSU with an exhaust fan at the rear. This fan, however, is very loud. Is it a good idea to replace the stock PSU fan with a quiet fan with similar airflow? The PSU fan is hard-wired to the PCB in the PSU so I was intending on snipping the stock fan wires and sealing the loose ends with electrical tape. I would then connect the new quiet fan to the PWR_FAN socket on the motherboard. Has anyone done this before themselves? Is it a good idea in the first place? Considering if my PSU fails, it could take out a couple of other components too.

    Read the article

  • Weird RAM Upgrade Experience

    - by Axel Isouard
    I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

    Read the article

  • building a new pc - no display, no beeps

    - by Adam
    Hi Building a new pc using this motherboard: GA-MA785GMT-UD2H and a 500W power supply (1 x 20 pin & 1 x 4 pin connectors). The CPU fan, hard drive and power supply all spin up but no display on the monitor and no beeps. Have tried: taking out all of the memory and still no beeps used a different power supply and still no display I only have the Motherboard, memory, CPU, heat sink & fan & power supply connected. Any ideas? Do I have a faulty motherboard?

    Read the article

  • How long until the chirping stops or what can I do to make it stop?

    - by MadBurn
    I know computers, I have been fixing them and building them for over a decade... but I don't know the exact electronics of them. My personal desktop PC is making an irregular, but constant, extremely high pitched chirping noise. I know this could be my hard drive, but I've heard that noise before and I believe this is a capacitor or part of the electronics. This noise is right at the edge of my hearing and I can feel it more than I can hear it. After a while, it starts to give me a headache and makes me physically sick. How long will this last? Is there anything I can do to fix it (short of replacing the entire motherboard)?

    Read the article

  • Updating ATI HD 5970 Graphics card - version errors?

    - by user55406
    I'm having an issue...My system specs is: Intel i7 960 6GM Corair XMS RAM ATI HD5970 graphics card Intel dx58so motherboard Cooler Master HAF 922 case 1.5TB Seagate hard drive Windows Vista x86 (32-bit). Here is my issue: when I go to AMD/ATI website to update my graphics card - it doesn't. when I type DxDiag and then click on display it tell me my version is 8.17.0 and its on 10.10.0 for the latest version. How can I get 8.17.0 too 10.10.0? I figure it would have done that after I updated the driver for my graphics card. Thanks.

    Read the article

  • How to choose between Mac Laptop and Desktop

    - by Sakamoto Kazuma
    I am looking at getting a Mac soon for both iPhone development, and video editing. Should I be looking at a desktop or MacBook? I do not plan for the machine to move from my desk at home, so portability is not an issue, however it will be next to both a windows 7 desktop as well as a Linux laptop with dock. Main things that I'm concerned about is whether or not a MacBook has the power needed to do the video editing that I'm planning on doing and whether or not I can afford a desktop.

    Read the article

  • Should I buy this particular MacMini?

    - by sil3nt
    Hello there, I'm not certain if this is the forum I should post this in but here goes anyway. So, I'm honestly clueless when it comes to mac's and I've never owned one before, in fact I still don't own anything with "i" in front of it (not a pc fan, but just low on cash you see:) and I was wondering if these specs are adequate? it's a MacMini G4 1.42Ghz, 1GB ram, 80Gb HDD, 32mb gfx The reason I'm looking for a mac is to start out in some iphone development, and I want a system that wont hang. would this particular system be suitable?. I just need it to be usable and not lag.

    Read the article

  • Hp pavilion dv7 power button

    - by Danny B
    My power button is non responsive I am getting LED for charging. I've taken it apart before to change the dc jack and it was fine and a few months later it just powered off. I try to power back on and is goes to start up then shuts off. I just took it apart and came to find the ribbon cable connecting the power button/speakers cover is barely hanging on do I have to replace the whole thing or is there a way to replace the ribbon cable?

    Read the article

  • PC will POST whenever feels likes it

    - by kyrpas
    I'm really sick of my PC and I'd love to throw it off the 5th floor but unfortunately I don't have this luxury right now. The issues started when I moved to a new house about 2 months ago. I didn't have this problem before. Case: Arctic Cooling Silentium T1 with embedded Fusion 550 Eco 80 PSU. M/B: ASRock A790GMH/128M Gfx: ATI Radeon HD 5770 Here's what's happening almost on a daily basis: I wake up in the morning, switch on the PC and all the fans start spinning. 9/10 the graphics fan stays on 100% and I know it won't post. If I'm lucky, ATI's fan stays on full power for a second, then goes back to normal and I get a normal post but that doesn't happen often. No, instead it's just drives me crazy. When I get no POST I'm trying a lot of different things and what bothers me the most is that they all work. But not always. No... That way I could find out what the hell is going on and we don't want that.. right? So, sometimes it manages to POST if I: remove the keyboard remove the power cable for a few minutes remove the graphics card remove the HDD cables do nothing, just turn it on and off a few times Sometimes it doesn't POST even if I do all of the above. And I end up removing all power cables from the M/B, and connecting all the stuff one by one. Sometimes it works, sometimes it doesn't and I just have to pray and wait. What the hell is that? I'm getting pissed of again just thinking about it. The only solution is to leave it on 24/7 but I don't want to do that. It should be able to turn on and off when I press the power button. I'm not asking much. I'm starting to think there's some weird electricity/power issue but I really don't understand what it is. There's no logical explanation about it. At least I can't find one. Any ideas?

    Read the article

  • new PC not work with existing router, but works fine when directly connecting to cable modem

    - by user34786
    I bought a new desktop PC (eMachine ET1331G-03W from WalMart) with windows 7 installed, but I can not access internet by connecting to my existing wireless router(LinkSys BEFW11S4) with wired cable. Though all other existing desktops and laptops have no problem connecting to the same router. However, the new desktop PC works fine and able to connect to internet if I bypass the router and directly hook up with the cable modem. At new PC when connecting to the router, I got the below information by typing ipconfig, the IP address looks wrong to me: autoconfiguration IPv4 Address: 169.254.71.140 subnet mask: 255.255.0.0 default gateway: (empty) NetBIOS over Tcpip: Enabled Typing ipconfig at all other desktop and laptop have values like below, which are good to me: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.140 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 The wireless router was on 192.168.1.1, I do not know why the new desktop got 169.254.71.140 IP? It should have something like 192.168.1.xxx, and it was configured to automatically get IP by DHCP. I have tried to switch cables,power off cable modem, router and reboot new pc many times and got no luck. So I believe this is only an issue related to router or new pc configuration. Can someone help me figure out the issue?

    Read the article

  • Blinking motherboard power LED

    - by Corey D
    I was just rebuilding an old desktop PC to be used as a HTPC and the LED on the motherboard that indicates when there is power is blinking fairly rapidly. The only way I can get the machine to boot is to press the power button immediately after plugging it in, and even then I cannot make it into the BIOS. The power supply has more than enough juice to power all of the components, and is from a reputable manufacturer. The motherboard is an Asus and is about 4.5 years old. Is my power supply hosed? Or is it my motherboard?

    Read the article

  • Sudden slow read & write speed on all IO

    - by user23392
    I have a custom built rig that has 2 storage drives. for OS: Western Digital 1.0TB HARD DR 64MB for other stuff: Corsair Performance 3 128GB (SSD) [ expected read speed: 400 mb/s ] The system was incredibly fast for a couple of months, then one day i was playing a game then it started to get buggy (some sounds and objects disappearing), i stopped the game and the system seemed to be unstable so i had to shut it down, next morning i couldn't start it up, it was saying something about corrupt device. I formatted both disks and installed a fresh copy of windows, all i can say that since that day the system was never like before, it takes 10 minutes to boot up (the icons and desktop slowly appear). but once it's done the slowness isn't as noticeable. Here's my benchmark on the HDD ( read speed - write speed ): And the SSD: Anyone knows what could be the issue?

    Read the article

  • Workstation Build: Single 2.66ghz i-7 with overclock potential, OR Dual 5520 2.26ghz Xeons?

    - by jdc0589
    There are probably better places to ask this, but I am used to the excellent quality of responses on stack overflow. I am rebuilding my desktop in a few months. Aside from normal lightweight internet usage, I use it to run sqlServer, mySql, 1-2 Ubuntu VMs from time to time, lots of IDE's, and a media server for my PS3. The two possible setups cost the exact same amount (within $50) and would both have 12gb 1333mhz ddr3 ram and a 500gb RAID-0 array (250x2). Now, If I go with a single i-7 920 2.66ghz quadcore, I can easily overclock it to 3ghz, and would have cash leftover to get a 160gb ssd (either the ocz vertex or the 120gb intel) for the main OS/Program install drive. Else, I could get a dual lga1366 motherboard with two e5520 Xeon's (2.26ghz),just use the disks I already have. So, do I go for 8 physical/16 virtual cores at 2.26ghz (No overclocking on server boards) with normal disk I/O, or a 4 physical/8 virtual cores at 3.0ghz with really outstanding disk I/O?

    Read the article

  • Is there any way to shut up my ATI HD 5770?

    - by slpsys
    So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

    Read the article

  • Bay Speaker Panel Installation

    - by JordanD
    I purchased a bay speaker panel that has a molex connector and a sound connector. Do I need to run the sound connector through my tower and somehow out the back into the IO panel? Or is there supposed to be a place on my motherboard for it to connect to? This is a replacement for normal desktop speakers for me to save desk space. Edit: Is there an adapter for the sound cable to the mother board? If so; what is it called? Thanks

    Read the article

  • Can all-in-one desktops be good developer machines?

    - by user6900
    I was just going through some all-in-one desktop PCs (Dell Studio One, HP Touch Smart, Lenovo IdeaCenter, etc.) and their specs really look good (4 GB RAM, 2.x GHz Core 2 Duo, etc.) Are there any disadvantages of such PCs as a developer machine? I mostly do Java (Eclipse + MySQL + Tomcat / JBoss) or .NET (Visual Studio + MsSQL) development. Edit: One common question I could see is harddrive size and that's around 320 GB 7200 RPM.

    Read the article

  • Where can I connect this USB 3.0 cord?

    - by tomsawyer95
    My motherboard has 2 USB 3.o slots in the back, where the usual slots go, but the tower also supports 1 or 2 USB 3.0 ports in the front, above the DVD drive. So, there is a cord coming out of those ports that has an end exactly like the one in the attached picture. I am not able to find a matching port on the mobo, so I presume it doesn't have one, and I would need an adapter or else just leave it inoperable. I have an ASUS P8Z68-V LX and an Antec 900 tower.

    Read the article

  • How to repair Creative Inspire Speakers 2.1 Volume Control Wheel?

    - by akula
    Due to dust or so, the Volume Control Wheel does not work properly. Volume goes to one speaker, and other gets muted. Vice versa. When I carefully turn the wheel sometimes the Volume works properly or sometimes with noise or muted one side. As I write this, I've cleaned it up with Petrol drops. PCB is drying. I chose Petrol because Contact Cleaner is expensive solution. Am I correct or any other method could be used? Thank you.

    Read the article

  • Creating a new PC, need suggestions on parts [closed]

    - by zilentworld
    I want to build a new PC and went around PC Stores to ask for quotations with only some parts that i want and the rest are filled up by them. Here is the "best" i got Core i5 3550 4gb ram ddr3 (planning to get 8,no brand yet) 500gb hdd (no brand yet) GTX550Ti 1g DDR5 Asus P8H61 ATX Casing Here is what i have from my last PC: Huntkey green power 500w Hyper TX3 Evo I want a dual monitor pc which will be used mostly for gaming,programming and i do a lot of multitasking. Im not planning YET to OC my cpu but i will in the near future. So can i ask for suggestions on what to change on my list? my budget is about 800$ (including 2nd monitor)

    Read the article

  • Build pc with 6 dvi outputs?

    - by pie154
    I am trying to build a pc with 6 dvi outputs, I have already built a machine that does this using a radeon hd 4850x2 graphics card, but unfortunately it seems that this is unvailable to buy from anywhere in the uk currently. has this card maybe been discontinued? As i can't source this card I was wondering if there is another graphics card available that will give 4 dvi ouputs so as I can get the total of 6 needed usin g another normal 2 port card? Thnaks

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >