Search Results

Search found 31973 results on 1279 pages for 'network library'.

Page 62/1279 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• My server is behind a router. How can I see my website correctly? [closed]

  - by Tokyo Dan

  I'm running a web server (Ubuntu) on my local home network. I'm behind a router. On the WAN I have a direct IP. When not on my home network and accessing my website via the WAN direct IP my website displays correctly and everything works. On my home LAN behind the router, accessing my website via the WAN direct gets me to my router's admin login page. This is normal. But... Accessing my website (via it's home LAN IP address) from another computer on my home LAN gets me to the website but the layout display is broken and clicking on any link takes me to the WAN direct IP (my router's Admin login page). How can i get my website to display properly and the links to work when accessing it from my home LAN?

  Read the article

• How to switch off wifi on startup or from the console

  - by mit

  I have installed ubuntu 10.04 on a laptop. Wifi is switched on by default on startup. I can disable it rightclicking the network manager icon in the gnome bar. How can I set it to have wifi switched off as default? Alternatively, how can I switch off wifi on the console? I tried already the rfkill command but it does not list any devices and it does not switch off wifi, I tried different parameters. This is a standard install of the Ubuntu 10.04 i386 Desktop Live CD on an IBM T40 Laptop. EDIT A: This is the output of some rfkill commands on my system, and it does not affect the wifi of the laptop: $ rfkill --help Usage: rfkill [options] command Options: --version show version (0.4) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm $ rfkill list $ rfkill list wifi $ rfkill list all $ rfkill list wlan $ sudo rfkill list all $ sudo rfkill block all $ sudo rfkill block wlan $ sudo rfkill block wifi $ EDIT B: Now I found out that sudo ifconfig eth1 down turns it off. And I can turn it on through the gnome network applet again. But the applet does not reflect the change from the commandline, it stills believes wifi is switched on. I have to switch it off and on again on the applet to switch it on again, when I switched it off from the console. Is there a better way? This is what the syslog looks like when I switch wireless off and on again from the network manager: NetworkManager: <info> (eth1): device state change: 3 -> 2 (reason 0) NetworkManager: <info> (eth1): deactivating device (reason: 0). NetworkManager: <info> Policy set '24' (eth0) as default for routing and DNS. NetworkManager: <info> (eth1): taking down device. avahi-daemon[660]: Withdrawing address record for fe80::202:8aff:feba:d798 on eth1. kernel: [ 971.472116] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:0 rsp2:0 NetworkManager: <info> (eth1): bringing up device. NetworkManager: <info> (eth1): supplicant interface state: starting -> ready NetworkManager: <info> (eth1): device state change: 2 -> 3 (reason 42) avahi-daemon[660]: Registering new address record for fe80::202:8aff:feba:d798 on eth1.*. kernel: [ 965.512048] eth1: no IPv6 routers present

  Read the article

• iwlwifi on lenovo z570 disabled by hardware switch

  - by Kevin Gallagher

  It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

  Read the article

• Connman not connecting to internet

  - by sagarchalise

  I wanted to try connman as I heard it will be replacing network manager. I kinda liked its looks and feel but the problem is I donot get connected to internet. I am using ADSL and it connects to my adsl router but doesnot ping google or any other sites. I tried to change the default gateway as well as use static ips but to no avail. It displays I am wired but doesnot open any sites or ping to any external sites except for 198.168.1.1 which is my router ip. Can anyone help ? Basically it is doing alright with network-manager as well as wicd

  Read the article

• Internet connection randomly drops out

  - by Dr_Bunsen

  Since a week or 2, I have this random network failures. No error pops up, the system says it's still connected to the internet(wifi and wired). The problem is, I can't connect to anything, even a ping google.com gives no feedback. And after many network-manager resets it will work again, for just a minute, and drop out again. I noticed that the /etc/resolv.conf contains this line: nameserver 127.0.0.1 I left out the "Do not edit" stuff, and after it worked for a second, this line is added: search lan When I change the nameserver to 8.8.8.8, I am still able to connect to anywhere. Does anyone got a clue what is happening here? I will provide any information asked. Thanks in advance p.s. I run Ubuntu 13.04 since lastnight(24-06-2013)

  Read the article

• how to find available wireless networks

  - by Quinn

  I'm using an HP Pavilion dv6000 I've looked at other answers similar to this question how ever when I look at my network symbol it doesn't say anything that the answer below says "Make sure that your wifi hardware switch is on or not. It is either F2 or F12 or near to it. Once the switch is enabled, there is a small fan-like applet on the top panel (Gnome Network Manager), fourth from the right. Click on it and if there is no tick mark on the option 'Enable Wireless', enable it. Wait till your wifi connection name appears." it how says 'Enable Networking' my wi-fi switch is on and I've tried using terminal to kill the applet as another answer suggests trying. Does anyone have any other ideas that might help? Just in case anybodies curious as to how I'm posting this I'm on my other ubuntu laptop that's running an older version.

  Read the article

• On restart server Ethernet went down saying not configured!

  - by Sumant

  i justy have configured my dhcp server with static ip. after configuration dhcp server & routers were working fine. but after restarting server network connectivity went off. there are two lan cards but none of them is up.i tried setting up manually ip address again but it remains same. when i executed sudo /etc/init.d/networking restart i got this message * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... /bin/sh: cannot open /etc/iptables_rules: No such file Failed to bring up eth0. i have configured my server according to this What is it the problem with ubuntu 11.10 or some configuration error. i am not getting it please help me.

  Read the article

• Disabling Bluetooth crashes 3G: can I consider this a bug?

  - by workflow

  I'm on an Acer TravelMate 8372G here runnning Ubuntu 11.10 64bit and I get the following weird behaviour: As soon as I turn off bluetoooth, the built-in 3G connection disconnects and Network Manager is unable to reconnect, leaving the following track in syslog: NetworkManager[1205]: <warn> GSM modem enable failed: (32) Unknown error The only way I'm able to reconnect 3G is by going all the way through rfkill unblock bluetooth rfkill block wwan rfkill unblock wwan sudo service network-manager restart My question to you guys: should I file a bug, or is there any any logical connection I'm missing that makes this a feature? = thanks! workflow

  Read the article

• How do I put an ASP.NET website project and class library projects in one .sln file on Subversion

  - by JustinP8

  My company has several class libraries we use in multiple website projects (not web application projects). Website projects don't have .sln files, but I'm sure I've read in my past research that you can make a blank solution and put your website and class library projects in it. After answers to my previous questions, this is the direction that I'm going (based slightly on [http://amadiere.com/blog/2009/06/multiple-subversion-projects-in-one-visual-studio-solution-using-svnexternals/][1]: /websites /website1 /trunk /website1 /libraries /library1 /trunk /library1 /library2 /trunk /library2 /etc... Then I planed on using svn:externals to copy /library1, /library2, and so on into the working_copy/websites/website1/ folder. I want my team members to be able to checkout the /trunk folder for website1 and get a .sln file, /library1 external, /library2 external, etc. I want that .sln file to contain the website1 website project, and all of the library external projects. Hopefully that would look something like: /working_copy /websites /website1 /trunk /website1 /library1 (svn:external of libraries/library1/trunk/library1) /library2 (svn:external of libraries/library2/trunk/library2) /etc. website1.sln So, at the end of all of this, the goal is that my teammates check out the trunk, open the solution, and everyone has the exact same solution. When we commit, everything is committed appropriately to subversion (the website code, and the libraries are committed to their appropriate place on the repo). How have others solved these issues? How can I make a .sln file that my team members and I can share in this manner? [1]: "This Article"

  Read the article

• How to set Ubuntu as wireless accespoint in the GUI way?

  - by Agmenor

  My aim is to make my Ubuntu machine be a wireless accesspoint using wifi. Of course I found two AskUbuntu questions already treating that; this one and that one. Nevertheless, as far as I am concerned I would like to set up such a network in the Graphical User Interface (GUI) way. Please avoid solutions with the command line. So a solution suggesting to use Network Manager would be really welcomed. Please name and describe very precisely each step, so I can easily find the equivalent in my own language. Thank you for your answers!

  Read the article

• How can I have my VPN connect automatically when the wireless connects?

  - by ams

  I have a working VPN connection using NetworkManager, OpenConnect, and the network-manager-openconnect-gnome package, but I have to start it manually every time I connect to a network, and I have to enter my password manually each time. How can I get it to connect automatically, and remember my password (securely)? I have checked the 'Connect Automatically' box on the Configure VPN page, but this seems to have no effect. I've also got the 'Start connecting automatically' box checked in the pop-up box, and that does avoid the need to press the connect button in that window, but seems to have no part in kicking off the whole process in the first place. There is no option to remember the password in the window, but maybe there's one somewhere else?

  Read the article

• Is there anything on a local network or desktop environment that could effect JScript execution?

  - by uku

  I know this sounds odd. The JS on my project functions perfectly, except when the web site is accessed using computers at one specific company. To make things even more difficult, the JS fails only about 50% of the time when run from that company. The JS failure occurs with FireFox, Chrome, and IE. I have tested this myself using FF and Chrome on a thumb drive. The browsers on my thumb always display my project site perfectly, except when run from a computer on said company's network where they fail at the same rate as the installed browsers. My JS is using jQuery and making some Ajax calls. The Ajax calls are where the failure is occurring. To diagnose the problem I created a logging function for my Ajax calls and recorded success and failure. Over a one month period, there were only a handful of failures (about 1%) from all access points other than this company. Oddly enough, the Ajax calls in the logging function are not failing. There is nothing exotic there - Just Win XP SP3. I have never noticed any other unusual behavior from their network. The company is a division of a mega ISP and is on their corporate network. Any other suggestions for troubleshooting would be welcome.

  Read the article

• How to test a C++ library usability in configure.in?

  - by jbatista

  Hi, I'm working on a C++ project and I'm looking for a way to test the existence and usability of IBM Informix's library with the Autotools - namely, editing a configure.in. I don't have experience with Autotools, so basically I'm picking up from the project's configure.in et al. scripts and copying&changing where I feel needs to be changed. IOW, I've been adapting from the existing text in configure.in. So far I've been using successfully the AC_ CHECK_ LIB in configure.in to test whether a certain library both exists and is usable. But this only seems to work with libraries with functions, not e.g. classes. Namely, this fails when testing Informix's libifc++.so: AC_CHECK_LIB(ifc++, ITString, INFORMIX_LIB="-L$INFORMIX_LIB_LOCATION/c++ -lifc++ -L$INFORMIX_LIB_LOCATION -L$INFORMIX_LIB_LOCATION/dmi -L$INFORMIX_LIB_LOCATION/esql -lifdmi -lifsql -lifasf -lifgen -lifos -lifgls -lifglx $INFORMIX_LIB_LOCATION/esql/checkapi.o -lm -ldl -lcrypt -lnsl", echo "* WARNING: libifc++.so not found!" INFORMIX_INC="" INFORMIX_LIB="" ) I've also tried using other combinations, like ITString::ITString, etc. I haven't found a "pure" function in Informix's API (i.e., one that isn't contexted in a C++ class). So I'm hoping that either there's a way to use AC_CHECK_LIB in this context, or there's another autoconf/configure.in "command" for this specific use. Thanks in advance for your feedback.

  Read the article

• Could not load SWT library on Windows 32-bit

  - by Firzen

  I am almost done with one Java project that I have been developing on Linux. Now I need to build and test it on Windows. So I have installed Eclipse on Windows XP 32-bit, and imported my project. All dependencies of project are in jar files in lib folder, and on Linux everything works well, but on Windows XP I get following error: Exception in thread "main" java.lang.UnsatisfiedLinkError: Could not load SWT library. Reasons: no swt-pi-gtk-4234 in java.library.path no swt-pi-gtk in java.library.path Can't load library: C:\Documents and Settings\firzen\.swt\lib\win32\x86\swt-pi-gtk-4234.dll Can't load library: C:\Documents and Settings\firzen\.swt\lib\win32\x86\swt-pi-gtk.dll at org.eclipse.swt.internal.Library.loadLibrary(Library.java:331) at org.eclipse.swt.internal.Library.loadLibrary(Library.java:240) at org.eclipse.swt.internal.gtk.OS.<clinit>(OS.java:22) at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:63) at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:54) at org.eclipse.swt.widgets.Display.<clinit>(Display.java:133) at gui.Frontend.<init>(Frontend.java:51) at Fighter.main(Fighter.java:18) I have searched for these DLLs, but I have failed to find them. Where can I download these DLL files? Thanks in advance.

  Read the article

• Oracle Technology Network Bulletin: "Oracle and Sun: Transformation Time"

  Get ready to be part of a diverse community of developers, system administrators, and architects.

  Read the article

• Is it acceptable to wrap PHP library functions solely to change the names?

  - by Carson Myers

  I'm going to be starting a fairly large PHP application this summer, on which I'll be the sole developer (so I don't have any coding conventions to conform to aside from my own). PHP 5.3 is a decent language IMO, despite the stupid namespace token. But one thing that has always bothered me about it is the standard library and its lack of a naming convention. So I'm curious, would it be seriously bad practice to wrap some of the most common standard library functions in my own functions/classes to make the names a little better? I suppose it could also add or modify some functionality in some cases, although at the moment I don't have any examples (I figure I will find ways to make them OO or make them work a little differently while I am working). If you saw a PHP developer do this, would you think "Man, this is one shoddy developer?" Additionally, I don't know much (or anything) about if/how PHP is optimized, and I know that usually PHP performace doesn't matter. But would doing something like this have a noticeable impact on the performance of my application?

  Read the article

• Free cross-platform library to convert numbers (money amounts) to words?

  - by bialix

  I'm looking for cross-platform library which I can use in my C application to convert money amounts (e.g. $123.50) to words (one hundred twenty three dollars and fifty cents). I need support for multiple currencies: dollars, euros, UK pounds etc. Although I understand this is not hard at all to write my own implementation, but I'd like to avoid reinventing wheel. I've tried to google it, but there is too much noise related to MS Word converters. Can anybody suggest something? UPDATE numerous comments suggest to write my own implementation because it's really easy task. And I agree. My point was about support of multiple currencies in the same time and different business rules to spell the amounts (should be fractional part written as text or numbers? etc.) As I understand serious business applications have such library inside, but I think there is nothing open-source available, maybe because it seems as very easy task. I'm going to write my own libary and then open-source it. Thanks to all.

  Read the article

• JavaScript library not working in IE, can't see error information.

  - by Wolfy87

  Hi there. I have been writing a JavaScript library for a few weeks now and it works brilliantly in Firefox, Chrome and Safari. I had not tested it in IE until recently. I do not own a Windows box so after testing it on my friends and realising it wasnt working I started going over my code for things that could be causing it to break. So far I have found nothing. I could not find any descriptions of the errors in the browser while I was there either. So I wondered if anyone could run my test script in an IE browser (6, 7 or 8) and let me know any information they can find as to why it crashed. Please ignore any information saying it works in IE6, I put that up there after testing it through http://ipinfo.info/netrenderer/ I just assumed it was working because I could set transparency and size via my script and see it run in this tool. Here is the link to my GitHub repository: https://github.com/Wolfy87/Spark If you download it and run spark.html it will attempt to run all of my functions from the library. So if anyone could be kind enough to run it in IE and either let me know what errors they are getting and possibly how to fix them then I will be extreamly grateful. Thank you in advance. EDIT: Here is it's website http://sparkjs.co.uk/

  Read the article

• knetworkmanager not starting at all

  - by yoshi

  It seems that my knetworkmanager is not starting anymore. Read: In KDE4's sys tray I don't have a icon to manage my networks. Also when starting it from terminal or kick off menu literally "nothing" happens. I don't know what's wrong with it. Sadly after reading this answer on superuser.com it seems I can not connect to wifi via iwconfig 'cause my network is WPA2 encrypted. (Basically I can not set they passphrase - invalid argumenterror.) So it seems I've to get knetworkmanger running again as I also can't download other tools. I've tried stuff like sudo service network-manager restart but it didn't seem to help. I'm kinda puzzled so any help for this would be appreciated. PS: If it hasn't become clear: The whole drama of is simply I can't connect to wifi and internet :o)

  Read the article

• NetworkManager refuses to manage my WLAN interface

  - by user104167

  I'm using Ubuntu 12.10 with Gnome 3.6 on a brand-new Samsung NP900X4C. The installer detected the wireless adapter, took in the SSID and WPA passphrase, wrote these into /etc/network/interfaces and connected perfectly. Once installation was finished I wanted to switch to using NetworkManager to manage the wireless adapter, since this is much more convenient than fiddling with /etc/network/interfaces every time I find a new hotspot. Therefore I edited /etc/NetworkManager/NetworkManager.conf to set: [ifupdown] managed=true When I rebooted NetworkManager, the problems started: - The NetworkManager tray applet changed from saying device not managed to device not ready - I lost all internet connectivity as wlan0 would not associate to the Access Point - if I set managed=false in NetworkManager.conf and restarted both NetworkManager and networking services from the command-line, the Gnome desktop "semi-crashed" and lost all its Window Decorations, the panel, the launcher and basically became unusable. However if I restart the computer completely after setting managed=false, wlan0 once again works perfectly.

  Read the article

• unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

  - by jon

  I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

  Read the article

• Differences between WPF Custom Control Library and plain Class Library?

  - by David Veeneman

  I posted a question a few months ago about sharing resource dictionaries across assemblies. It turns out you can do that using the Component Resource Key markup extension. At the time, I could only get it working with a WPF Custom Control project, not with a plain Class Library project. Now I need to use an existing plain Class Library project to host a shared resource dictionary. That means I need to retrofit the Class Library project to support the Component Resource Key markup extension. I have added a Themes folder and a Generic.xaml resource dictionary document to the Class Library project, as well as references to PresentationCore, PresentationFramework, and WindowsBase. Unfortunately, that doesn't seem to do the trick. So, here is my question: Other than the above, what does a WPF Custom Control Library project have that a plain Class Library project doesn't? Or, to put it another way, what else could I add to my class library project to get this feature working? Thanks.

  Read the article

• Autoconf, Libtool shared and static library

  - by siddhusingh

  I am using autoconf gnu tools to build my product. It generates both the shared as well as static library for any library where *.la is mentioned. The issue is if you use .la to link your binary in Makefile.am. It links with the dynamic library but when you use ldd to the binary, it says "not a dynamic executable" although it links with shared library. I proved it by removing the shared library after the binary is built and then tried to run the binary. It didn't find the shared library and couldn't run. Another question is how to put library in a specified location using Makefile.am direction ?

  Read the article

• Abstract classes in shared library

  - by JTom

  Hi, I have an ordinary abstract class that has couple of pure virtual methods. The class itself is a part of the shared library. The compilation of the shared library itself is OK. But when the library is linked to another program that has another class deriving from the abstract one in the shared library and defining the pure virtual methods, I get the following linker error: I compile like this..: g++ -I../path/to/the/library main.cpp derived.cpp -L../path/to/the/library -lsomename -o shared ...and the linker error is: libsomename.so: undefined reference to `AbstractClass::method()' It's like the abstract class cannot access its pure virtual methods but I do not try to make any instance of the abstract class anywhere in the library. What could be the problem?

  Read the article

• Wireless Drivers for Broadcom BCM 4321 (14e4:4329) will not stay connected to a wireless network

  - by Eugene

  So, I'm not necessary new to Linux, I just never took the time to learn it, so please, bare with me. I just swapped out one of my wireless cards from one computer to another. This wireless card in question would be a "Broadcom BCM4321 (14e4:4329)" or actually a "Netgear WN311B Rangemax Next 270 Mbps Wireless PCI Adapter", but that's not important. I've tried (but probably screwed up in the process) installing the "wl" , "b43" and "brcmsmac" drivers, or at least I think I did. Currently I have only the following drivers loaded: eugene@EugeneS-PCu:~$ lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" b43 387371 0 bcma 52096 1 b43 mac80211 630653 1 b43 cfg80211 484040 2 b43,mac80211 ssb_hcd 12869 0 ssb 62379 2 b43,ssb_hcd The main issue is that with most of the drivers available that I've installed, they will find my wireless network but, they will only stay connected for about a minute with abnormally slow speed and then all of a sudden disconnect. Currently, the computer is hooked into another to share it's connect so that I can install drivers from the internet instead of loading them on to a flash drive and doing it offline. If anyone has any insight to the problem, that would be awesome. If not, I'll probably just look up how to install the Windows closed source driver. Edit 1: Even when I try the method here, as suggested when this was marked as a duplicate, I still can't stay connected to a wireless network. Edit 2: After discussing my issue with @Luis, he opened my question back up and told me to include the tests/procedures in the comments. Basically I did this: Read the first answer of the link above when this question was marked as duplicate which involved installing removing bcmwl-kernel-source and instead install firmware-b43-installer and b43-fwcutter. No change of result and contacted Luis in the comments, who then told me to try the second answer which involved removing my previous mistake and installing bcmwl-kernel-source Now the Network Manger (this has happend before, but usally I fixed it by using a different driver) even recognizes WiFi exist (both non-literal and literal). Luis who then suggested sudo rfkill unblock all rfkill unblock all didn't return anything, so I decide to try sudo rfkill list all. Returns nothing (no wonder rfkill unblock all did nothing). I enter lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" and that returns nothing. Try loading the driver by entering sudo modprobe b43 and try lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" again. Returns this: eugene@Eugenes-uPC:~$ sudo modprobe b43 eugene@Eugenes-uPC:~$ lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" b43 387371 0 bcma 52096 1 b43 mac80211 630653 1 b43 cfg80211 484040 2 b43,mac80211 ssb_hcd 12869 0 ssb 62379 2 b43,ssb_hcd So to recap: Currently Network Manager doesn't recognize Wireless exists, b43 drivers are loaded and I've currently hardwired a connect from my laptop to the computer that's causing this.

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >