Search Results

Search found 5528 results on 222 pages for 'offsite storage'.

Page 62/222 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• 'pip install carbon' looks like it works, but pip disagrees afterward

  - by fennec

  I'm trying to use pip to install the package carbon, a package related to statistics collection. When I run pip install carbon, it looks like everything works. However, pip is unconvinced that the package is actually installed. (This ultimately causes trouble because I'm using Puppet, and have a rule to install carbon using pip, and when puppet asks pip "is this package installed?" it says "no" and it reinstalls it again.) How do I figure out what's preventing pip from recognizing the success of this installation? Here is the output of the regular install: root@statsd:/opt/graphite# pip install carbon Downloading/unpacking carbon Downloading carbon-0.9.9.tar.gz Running setup.py egg_info for package carbon package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) Requirement already satisfied (use --upgrade to upgrade): twisted in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): txamqp in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): zope.interface in /usr/local/lib/python2.7/dist-packages (from twisted->carbon) Requirement already satisfied (use --upgrade to upgrade): distribute in /usr/local/lib/python2.7/dist-packages (from zope.interface->twisted->carbon) Installing collected packages: carbon Running setup.py install for carbon package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) changing mode of build/scripts-2.7/validate-storage-schemas.py from 664 to 775 changing mode of build/scripts-2.7/carbon-aggregator.py from 664 to 775 changing mode of build/scripts-2.7/carbon-cache.py from 664 to 775 changing mode of build/scripts-2.7/carbon-relay.py from 664 to 775 changing mode of build/scripts-2.7/carbon-client.py from 664 to 775 changing mode of /opt/graphite/bin/validate-storage-schemas.py to 775 changing mode of /opt/graphite/bin/carbon-aggregator.py to 775 changing mode of /opt/graphite/bin/carbon-cache.py to 775 changing mode of /opt/graphite/bin/carbon-relay.py to 775 changing mode of /opt/graphite/bin/carbon-client.py to 775 Successfully installed carbon Cleaning up... root@statsd:/opt/graphite# pip freeze | grep carbon root@statsd: Here is the verbose version of the install: root@statsd:/opt/graphite# pip install carbon -v Downloading/unpacking carbon Using version 0.9.9 (newest of versions: 0.9.9, 0.9.9, 0.9.8, 0.9.7, 0.9.6, 0.9.5) Downloading carbon-0.9.9.tar.gz Running setup.py egg_info for package carbon running egg_info creating pip-egg-info/carbon.egg-info writing requirements to pip-egg-info/carbon.egg-info/requires.txt writing pip-egg-info/carbon.egg-info/PKG-INFO writing top-level names to pip-egg-info/carbon.egg-info/top_level.txt writing dependency_links to pip-egg-info/carbon.egg-info/dependency_links.txt writing manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' warning: manifest_maker: standard file '-c' not found package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) reading manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' writing manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' Requirement already satisfied (use --upgrade to upgrade): twisted in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): txamqp in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): zope.interface in /usr/local/lib/python2.7/dist-packages (from twisted->carbon) Requirement already satisfied (use --upgrade to upgrade): distribute in /usr/local/lib/python2.7/dist-packages (from zope.interface->twisted->carbon) Installing collected packages: carbon Running setup.py install for carbon running install running build running build_py creating build creating build/lib.linux-i686-2.7 creating build/lib.linux-i686-2.7/carbon copying lib/carbon/amqp_publisher.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/manhole.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/instrumentation.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/cache.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/management.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/relayrules.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/events.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/protocols.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/conf.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/rewrite.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/hashing.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/writer.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/client.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/util.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/service.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/amqp_listener.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/routers.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/storage.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/log.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/__init__.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/state.py -> build/lib.linux-i686-2.7/carbon creating build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/receiver.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/rules.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/buffers.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/__init__.py -> build/lib.linux-i686-2.7/carbon/aggregator package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) creating build/lib.linux-i686-2.7/twisted creating build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_relay_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_aggregator_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_cache_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/carbon/amqp0-8.xml -> build/lib.linux-i686-2.7/carbon running build_scripts creating build/scripts-2.7 copying and adjusting bin/validate-storage-schemas.py -> build/scripts-2.7 copying and adjusting bin/carbon-aggregator.py -> build/scripts-2.7 copying and adjusting bin/carbon-cache.py -> build/scripts-2.7 copying and adjusting bin/carbon-relay.py -> build/scripts-2.7 copying and adjusting bin/carbon-client.py -> build/scripts-2.7 changing mode of build/scripts-2.7/validate-storage-schemas.py from 664 to 775 changing mode of build/scripts-2.7/carbon-aggregator.py from 664 to 775 changing mode of build/scripts-2.7/carbon-cache.py from 664 to 775 changing mode of build/scripts-2.7/carbon-relay.py from 664 to 775 changing mode of build/scripts-2.7/carbon-client.py from 664 to 775 running install_lib copying build/lib.linux-i686-2.7/carbon/amqp_publisher.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/manhole.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/amqp0-8.xml -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/instrumentation.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/cache.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/management.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/relayrules.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/events.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/protocols.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/conf.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/rewrite.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/hashing.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/writer.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/client.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/util.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/aggregator/receiver.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/rules.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/buffers.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/__init__.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/service.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/amqp_listener.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/routers.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/storage.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/log.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/__init__.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/state.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/twisted/plugins/carbon_relay_plugin.py -> /opt/graphite/lib/twisted/plugins copying build/lib.linux-i686-2.7/twisted/plugins/carbon_aggregator_plugin.py -> /opt/graphite/lib/twisted/plugins copying build/lib.linux-i686-2.7/twisted/plugins/carbon_cache_plugin.py -> /opt/graphite/lib/twisted/plugins byte-compiling /opt/graphite/lib/carbon/amqp_publisher.py to amqp_publisher.pyc byte-compiling /opt/graphite/lib/carbon/manhole.py to manhole.pyc byte-compiling /opt/graphite/lib/carbon/instrumentation.py to instrumentation.pyc byte-compiling /opt/graphite/lib/carbon/cache.py to cache.pyc byte-compiling /opt/graphite/lib/carbon/management.py to management.pyc byte-compiling /opt/graphite/lib/carbon/relayrules.py to relayrules.pyc byte-compiling /opt/graphite/lib/carbon/events.py to events.pyc byte-compiling /opt/graphite/lib/carbon/protocols.py to protocols.pyc byte-compiling /opt/graphite/lib/carbon/conf.py to conf.pyc byte-compiling /opt/graphite/lib/carbon/rewrite.py to rewrite.pyc byte-compiling /opt/graphite/lib/carbon/hashing.py to hashing.pyc byte-compiling /opt/graphite/lib/carbon/writer.py to writer.pyc byte-compiling /opt/graphite/lib/carbon/client.py to client.pyc byte-compiling /opt/graphite/lib/carbon/util.py to util.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/receiver.py to receiver.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/rules.py to rules.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/buffers.py to buffers.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/__init__.py to __init__.pyc byte-compiling /opt/graphite/lib/carbon/service.py to service.pyc byte-compiling /opt/graphite/lib/carbon/amqp_listener.py to amqp_listener.pyc byte-compiling /opt/graphite/lib/carbon/routers.py to routers.pyc byte-compiling /opt/graphite/lib/carbon/storage.py to storage.pyc byte-compiling /opt/graphite/lib/carbon/log.py to log.pyc byte-compiling /opt/graphite/lib/carbon/__init__.py to __init__.pyc byte-compiling /opt/graphite/lib/carbon/state.py to state.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_relay_plugin.py to carbon_relay_plugin.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_aggregator_plugin.py to carbon_aggregator_plugin.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_cache_plugin.py to carbon_cache_plugin.pyc running install_data copying conf/storage-schemas.conf.example -> /opt/graphite/conf copying conf/rewrite-rules.conf.example -> /opt/graphite/conf copying conf/relay-rules.conf.example -> /opt/graphite/conf copying conf/carbon.amqp.conf.example -> /opt/graphite/conf copying conf/aggregation-rules.conf.example -> /opt/graphite/conf copying conf/carbon.conf.example -> /opt/graphite/conf running install_egg_info running egg_info creating lib/carbon.egg-info writing requirements to lib/carbon.egg-info/requires.txt writing lib/carbon.egg-info/PKG-INFO writing top-level names to lib/carbon.egg-info/top_level.txt writing dependency_links to lib/carbon.egg-info/dependency_links.txt writing manifest file 'lib/carbon.egg-info/SOURCES.txt' warning: manifest_maker: standard file '-c' not found reading manifest file 'lib/carbon.egg-info/SOURCES.txt' writing manifest file 'lib/carbon.egg-info/SOURCES.txt' removing '/opt/graphite/lib/carbon-0.9.9-py2.7.egg-info' (and everything under it) Copying lib/carbon.egg-info to /opt/graphite/lib/carbon-0.9.9-py2.7.egg-info running install_scripts copying build/scripts-2.7/validate-storage-schemas.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-aggregator.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-cache.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-relay.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-client.py -> /opt/graphite/bin changing mode of /opt/graphite/bin/validate-storage-schemas.py to 775 changing mode of /opt/graphite/bin/carbon-aggregator.py to 775 changing mode of /opt/graphite/bin/carbon-cache.py to 775 changing mode of /opt/graphite/bin/carbon-relay.py to 775 changing mode of /opt/graphite/bin/carbon-client.py to 775 writing list of installed files to '/tmp/pip-9LuJTF-record/install-record.txt' Successfully installed carbon Cleaning up... Removing temporary dir /opt/graphite/build... root@statsd:/opt/graphite# For reference, this is pip 1.0 from /usr/lib/python2.7/dist-packages (python 2.7)

  Read the article

• How to I make my bootcamp partition bootable again?

  - by KJFMusic

  I'm having a similar problem as everyone else in this posting. I have 5 partitions. 3 of which I created for my Mac OS Lion installation, Windows 7 installation and a 3rd for storage. Everything was running fine for quite sometime until recently. My Windows 7 installation has suddenly stopped booting. Instead of a start up screen I get: Windows failed to start. A recent hardware or software change might be the cause. File: \BOOT\BCD Status: 0xc000000d Info: An error occurred while attempting to read the boot configuration data Mac OS Lion starts up fine. I'm unable to mount my "Bootcamp" partition nor the "Storage" partition. On top of that "Storage" has been renamed to "disk0s5". When I installed Windows 7 it didn't recognize the "Storage" partition that was created in Lion so it merged what it thought was free diskspace (I'm assuming the same space that Mac OS recognized as Storage) to the Root Drive of Windows 7 (Bootcamp). Are you able to assist?

  Read the article

• NFSv4 "Too many levels of symbolic links" error

  - by user1434058

  Both machines are running Ubuntu 12.04 Remote NFSv4 Client $ ls /mnt/storage/aaaaaaa_aaa/bbbb/cccc_ccccc gives this error: ls: reading directory .: Too many levels of symbolic links How can I fix this? When error occurs ls start listing the files, however PHP brakes. On the NFSv4 Server In /etc/fstab: /mnt/storage /srv/storage none bind 0 0 In /etc/exports /srv 192.168.1.0/24(rw,async,insecure,no_subtree_check,crossmnt,fsid=0,no_root_squash) /srv/storage 192.168.1.0/24(rw,async,nohide,insecure,no_subtree_check,no_root_squash) ERROR root@ds:root@ds:/mnt/storage/foreign_dbs/imdb/imdb_htmls# ls -l | head ls: reading directory .: Too many levels of symbolic links total 10302840 -rw-r--r-- 1 root root 10484 Jul 5 13:56 0019038.gz -rw-r--r-- 1 root root 16264 Mar 30 00:31 0259701.gz -rw-r--r-- 1 root root 13784 Mar 30 14:20 1000000.gz -rw-r--r-- 1 root root 12741 Mar 30 13:04 1000003.gz -rw-r--r-- 1 root root 12794 Mar 30 12:40 1000004.gz -rw-r--r-- 1 root root 13123 Mar 30 12:07 1000005.gz -rw-r--r-- 1 root root 13183 Mar 30 12:04 1000006.gz -rw-r--r-- 1 root root 13443 Jul 4 01:16 1000007.gz -rw-r--r-- 1 root root 12968 Mar 30 11:05 1000008.gz I came across it in PHP. scandir would return 1612577.gz & 1612579.gz, but skips 1612578.gz and yet the file types and properties are identical on them and this only happens on the nfs client, works 100% on the server

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendati

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• Linux Mounting Problem

  - by Sam

  I have an Iomega Network Attached Storage device on my Windows network. I am trying to use a clonezilla live USB flash drive to backup my netbook to my Iomega Network Attached Storage device. The clonezilla USB flash drive runs linux. I'm having trouble getting the Network Attached Storage unit to mount using the following command: mount -t cifs -o username="myUsername" //192.168.1.100/backup /home/partimg The response from linux is: [134.730738] CIFS VFS: cifs_mount failed w/return code = -6 retrying with upper case share name [134.788461] CIFS VFS: cifs_mount failed w/return code = -6 mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I also tried adding the following to my username: username="myUsername,domain=workgroup" but that did not change the error. I am able to ping the network attached storage unit from linux on my netbook. I also booted from a Slax Live USB Flash Drive and Slax auto-mounted my network attached storage unit via Samba. Unfortunately, I don't believe that I can run clonezilla from inside the Slax installation. Does anyone have any insight about what is wrong with my mount statement? Or is there something peculiar about Iomega drives which makes this impossible?

  Read the article

• Geographically distributed file system with preferred locality

  - by dpb

  Hi All -- I'm building a application that needs to distribute a standard file server across a few sites over a WAN. Basically, each site needs to write a lot of misc files of varying size (some in the 100s MB range, but most small), and the application is written such that collisions aren't a problem. I'd like to have a system set up that meets the following qualifications: Each site can store files in a shared "namespace". That is, all the files would show up in the same filesystem. Each site would not send data over the WAN unless necessary. I.e., there would be local storage on each side of the WAN that would be "merged" into the same logical filesystem. Linux & Free ($$$) is a must. Basically, something like a central NFS share would meet most of the requirements, however it would not allow the locally written data to stay local. All data from remote sides of the WAN would be copied locally all the time. I have looked into Lustre, and have run some successful tests with it, however, it appears to distribute files fairly uniformly across the distributed storage. I have dug through the documentation and have not found anything that automatically will "prefer" local storage over remote storage. Even something that went with the lowest latency storage would be fine. It would work most of the time, which would meet this application's requirements. Any ideas?

  Read the article

• Why do SNMP agents need MIB files?

  - by user1495181

  After reading up on SNMP and some of the questions help here I think understand the agent role as a SNMP service to device (Like SQL, it is an API to storage). When you execute a SQL query the SQL engine does all the work and returns the result - You don't need to be aware of how the storage and where the storage is done. But MIBs are not actual storage , so what is the role of my agent? if the agent only register the MIB like i follow in this tutorial, is it not used as handler at all? Say that I want monitor my application's pending request queue, so I want an agent that all SNMP request for application_pending_request will be fired for it and it will return the queue depth. Why do I need to have an actual MIB when all I need to poll my application queue in order to get result?

  Read the article

• Windows XP Does Not Follow CNAME Shares

  - by user49349

  I am supporting a mix of Windows XP Pro and Windows 7 desktops in my Active Directory network, and I am having an odd issue with XP and CNAME records. Say I have a record in my DNS for a server with an A name of something like STORAGE.company.local and give it a CNAME of NAS.company.local. I can go onto an XP and 7 computer, and ping NAS and it will automatically resolve to STORAGE.company.local. If I am on Windows 7 and go to run and enter \\STORAGE or \\NAS, it will go to that server in Explorer. If I do the same in XP, STORAGE will work but NAS will not. It just times out Is there some setting buried in XP to make this work properly?

  Read the article

• usb_modeswitch not switching

  - by deniz

  After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

  Read the article

• LUNS access issue in ESX4 Cluster server

  - by rmustafa

  HI, I've created volumes in equallogic in PS 6000 XV(having 2 member which is in 1 pool), checked & those volumes can be easily detected my ISCSI software in windows. But the problem with ESX , not able to see the assigned disk on ESX server, I can explain what I've done: 1.Created Cluster with enabled HA & DRS 2.Added 3 ESX4 HOST 3.Added VMkernel & configured in all 3 ESX4, enabled vmotion & FT on the same adapter. 4.went to iSCSI storage adapter properties, enabled iSCSI 5.Trying to discover the available storage with the controller IP on dynamic discovery, but not able to see the assigned storage Note: the same volume is accessed to windows that means there is no issue from storage , am I right ???? Note: I wanted to mount the same volume in all 3 ESX host. Please suggest .... Thanks & Regards, Rashid Mustafa

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• Sending STDERR to logger

  - by Gnutt

  Im writing a bash-script to perform an offsite backup, using rsync over SSH. I'm able to send STDOUT to logger, for logs via rsync --del -az -e 'ssh -i mycrt.crt' /home/gnutt/backup/ me@offisite:backup | logger -i But I want to send STDERR instead, so if there is a problem, such as that offsite is unavailable, that output should be sent to logger and logged.

  Read the article

• Apache and Virtual Hosts Problem on OS X

  - by Charles Chadwick

  I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

  Read the article

• Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

  - by Anon

  We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

  Read the article

• Exchange 2007 | Mailbox DB Size 180GB

  - by rihatum

  Hi All, I have a Exchange 2007 SP1 server running on Windows 2008 6 HD Drives in a RAID-1 OS, DB, Logs on separate RAID-1 Disks Size of the Mailbox Database is 183GB and increasing We only have First Storage Group and Second Storage Group There is no more space on the server to install new Physical Disks and create a Storage Group Q - Can I resize the RAID-1 Partition where the DB is ? Q - Any other suggestions as to how I can decrease the Mailbox DB Size ? Will be grateful for your suggestions on this. Kind Regards

  Read the article

• Suggestions on providing HA access to an external (fibre) RAID subsystem

  - by user145198

  We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

  Read the article

• What is the best* Android phone available on the market? [closed]

  - by Nick Kavadias

  Best (for this question) is defined as having: fastest processor largest storage largest screen size

  Read the article

• Recovering ZFS pool with errors on import.

  - by Sqeaky

  I have a machine that had some trouble with some bad RAM. After I diagnosed it and removed the offending stick of RAM, The ZFS pool in the machine was trying to access drives by using incorrect device names. I simply exported the pool and re-imported it to correct this. However I am now getting this error. The pool Storage no longer automatically mounts sqeaky@sqeaky-media-server:/$ sudo zpool status no pools available A regular import says its corrupt sqeaky@sqeaky-media-server:/$ sudo zpool import pool: Storage id: 13247750448079582452 state: UNAVAIL status: The pool is formatted using an older on-disk version. action: The pool cannot be imported due to damaged devices or data. config: Storage UNAVAIL insufficient replicas raidz1 UNAVAIL corrupted data 805066522130738790 ONLINE sdd3 ONLINE sda3 ONLINE sdc ONLINE A specific import says the vdev configuration is invalid sqeaky@sqeaky-media-server:/$ sudo zpool import Storage cannot import 'Storage': invalid vdev configuration I should have 4 devices in my ZFS pool: /dev/sda3 /dev/sdd3 /dev/sdc /dev/sdb I have no clue what 805066522130738790 is but I plan on investigating further. I am also trying to figure out how to use zdb to get more information about what the pool thinks is going on. For reference This was setup this way, because at the time this machine/pool was setup it needed certain Linux features and booting from ZFS wasn't yet supported in Linux. The partitions sda1 and sdd1 are in a raid 1 for the operating system and sdd2 and sda2 are in a raid1 for the swap. Any clue on how to recover this ZFS pool?

  Read the article

• Restoring file properties but not the complete files, from backup

  - by Jon

  While copying data from my old storage on a Linux computer to the new (linux-based) NAS, I accidentially failed with getting the properties (most important: the modify dates) along to the new location. I also continued to use/modify the files at the new location and hence, cannot just copy it all over again. What I would like to do is a diff between files in the old vs. the new storage, and for those being identical, restore the properties from Linux storage to the NAS storage files. Is there a clever way such as a script or a tool to do this? I could either run it on the Linux box or in worst case from a remote Windows computer. Grateful for any suggestions. /Jon

  Read the article

• Apache and Virtual Hosts Problem on OS X

  - by Charles Chadwick

  I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

  Read the article

• Creating HTML5 Offline Web Applications with ASP.NET

  - by Stephen Walther

  The goal of this blog entry is to describe how you can create HTML5 Offline Web Applications when building ASP.NET web applications. I describe the method that I used to create an offline Web application when building the JavaScript Reference application. You can read about the HTML5 Offline Web Application standard by visiting the following links: Offline Web Applications Firefox Offline Web Applications Safari Offline Web Applications Currently, the HTML5 Offline Web Applications feature works with all modern browsers with one important exception. You can use Offline Web Applications with Firefox, Chrome, and Safari (including iPhone Safari). Unfortunately, however, Internet Explorer does not support Offline Web Applications (not even IE 9). Why Build an HTML5 Offline Web Application? The official reason to build an Offline Web Application is so that you do not need to be connected to the Internet to use it. For example, you can use the JavaScript Reference Application when flying in an airplane, riding a subway, or hiding in a cave in Borneo. The JavaScript Reference Application works great on my iPhone even when I am completely disconnected from any network. The following screenshot shows the JavaScript Reference Application running on my iPhone when airplane mode is enabled (notice the little orange airplane):   Admittedly, it is becoming increasingly difficult to find locations where you can’t get Internet access. A second, and possibly better, reason to create Offline Web Applications is speed. An Offline Web Application must be downloaded only once. After it gets downloaded, all of the files required by your Web application (HTML, CSS, JavaScript, Image) are stored persistently on your computer. Think of Offline Web Applications as providing you with a super browser cache. Normally, when you cache files in a browser, the files are cached on a file-by-file basis. For each HTML, CSS, image, or JavaScript file, you specify how long the file should remain in the cache by setting cache headers. Unlike the normal browser caching mechanism, the HTML5 Offline Web Application cache is used to specify a caching policy for an entire set of files. You use a manifest file to list the files that you want to cache and these files are cached until the manifest is changed. Another advantage of using the HTML5 offline cache is that the HTML5 standard supports several JavaScript events and methods related to the offline cache. For example, you can be notified in your JavaScript code whenever the offline application has been updated. You can use JavaScript methods, such as the ApplicationCache.update() method, to update the cache programmatically. Creating the Manifest File The HTML5 Offline Cache uses a manifest file to determine the files that get cached. Here’s what the manifest file looks like for the JavaScript Reference application: CACHE MANIFEST # v30 Default.aspx # Standard Script Libraries Scripts/jquery-1.4.4.min.js Scripts/jquery-ui-1.8.7.custom.min.js Scripts/jquery.tmpl.min.js Scripts/json2.js # App Scripts App_Scripts/combine.js App_Scripts/combine.debug.js # Content (CSS & images) Content/default.css Content/logo.png Content/ui-lightness/jquery-ui-1.8.7.custom.css Content/ui-lightness/images/ui-bg_glass_65_ffffff_1x400.png Content/ui-lightness/images/ui-bg_glass_100_f6f6f6_1x400.png Content/ui-lightness/images/ui-bg_highlight-soft_100_eeeeee_1x100.png Content/ui-lightness/images/ui-icons_222222_256x240.png Content/ui-lightness/images/ui-bg_glass_100_fdf5ce_1x400.png Content/ui-lightness/images/ui-bg_diagonals-thick_20_666666_40x40.png Content/ui-lightness/images/ui-bg_gloss-wave_35_f6a828_500x100.png Content/ui-lightness/images/ui-icons_ffffff_256x240.png Content/ui-lightness/images/ui-icons_ef8c08_256x240.png Content/browsers/c8.png Content/browsers/es3.png Content/browsers/es5.png Content/browsers/ff3_6.png Content/browsers/ie8.png Content/browsers/ie9.png Content/browsers/sf5.png NETWORK: Services/EntryService.svc http://superexpert.com/resources/JavaScriptReference/ A Cache Manifest file always starts with the line of text Cache Manifest. In the manifest above, all of the CSS, image, and JavaScript files required by the JavaScript Reference application are listed. For example, the Default.aspx ASP.NET page, jQuery library, JQuery UI library, and several images are listed. Notice that you can add comments to a manifest by starting a line with the hash character (#). I use comments in the manifest above to group JavaScript and image files. Finally, notice that there is a NETWORK: section of the manifest. You list any file that you do not want to cache (any file that requires network access) in this section. In the manifest above, the NETWORK: section includes the URL for a WCF Service named EntryService.svc. This service is called to get the JavaScript entries displayed by the JavaScript Reference. There are two important things that you need to be aware of when using a manifest file. First, all relative URLs listed in a manifest are resolved relative to the manifest file. The URLs listed in the manifest above are all resolved relative to the root of the application because the manifest file is located in the application root. Second, whenever you make a change to the manifest file, browsers will download all of the files contained in the manifest (all of them). For example, if you add a new file to the manifest then any browser that supports the Offline Cache standard will detect the change in the manifest and download all of the files listed in the manifest automatically. If you make changes to files in the manifest (for example, modify a JavaScript file) then you need to make a change in the manifest file in order for the new version of the file to be downloaded. The standard way of updating a manifest file is to include a comment with a version number. The manifest above includes a # v30 comment. If you make a change to a file then you need to modify the comment to be # v31 in order for the new file to be downloaded. When Are Updated Files Downloaded? When you make changes to a manifest, the changes are not reflected the very next time you open the offline application in your web browser. Your web browser will download the updated files in the background. This can be very confusing when you are working with JavaScript files. If you make a change to a JavaScript file, and you have cached the application offline, then the changes to the JavaScript file won’t appear when you reload the application. The HTML5 standard includes new JavaScript events and methods that you can use to track changes and make changes to the Application Cache. You can use the ApplicationCache.update() method to initiate an update to the application cache and you can use the ApplicationCache.swapCache() method to switch to the latest version of a cached application. My heartfelt recommendation is that you do not enable your application for offline storage until after you finish writing your application code. Otherwise, debugging the application can become a very confusing experience. Offline Web Applications versus Local Storage Be careful to not confuse the HTML5 Offline Web Application feature and HTML5 Local Storage (aka DOM storage) feature. The JavaScript Reference Application uses both features. HTML5 Local Storage enables you to store key/value pairs persistently. Think of Local Storage as a super cookie. I describe how the JavaScript Reference Application uses Local Storage to store the database of JavaScript entries in a separate blog entry. Offline Web Applications enable you to store static files persistently. Think of Offline Web Applications as a super cache. Creating a Manifest File in an ASP.NET Application A manifest file must be served with the MIME type text/cache-manifest. In order to serve the JavaScript Reference manifest with the proper MIME type, I added two files to the JavaScript Reference Application project: Manifest.txt – This text file contains the actual manifest file. Manifest.ashx – This generic handler sends the Manifest.txt file with the MIME type text/cache-manifest. Here’s the code for the generic handler: using System.Web; namespace JavaScriptReference { public class Manifest : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/cache-manifest"; context.Response.WriteFile(context.Server.MapPath("Manifest.txt")); } public bool IsReusable { get { return false; } } } } The Default.aspx file contains a reference to the manifest. The opening HTML tag in the Default.aspx file looks like this: <html manifest="Manifest.ashx"> Notice that the HTML tag contains a manifest attribute that points to the Manifest.ashx generic handler. Internet Explorer simply ignores this attribute. Every other modern browser will download the manifest when the Default.aspx page is requested. Seeing the Offline Web Application in Action The experience of using an HTML5 Web Application is different with different browsers. When you first open the JavaScript Reference application with Firefox, you get the following warning: Notice that you are provided with the choice of whether you want to use the application offline or not. Browsers other than Firefox, such as Chrome and Safari, do not provide you with this choice. Chrome and Safari will create an offline cache automatically. If you click the Allow button then Firefox will download all of the files listed in the manifest. You can view the files contained in the Firefox offline application cache by typing about:cache in the Firefox address bar: You can view the actual items being cached by clicking the List Cache Entries link: The Offline Web Application experience is different in the case of Google Chrome. You can view the entries in the offline cache by opening the Developer Tools (hit Shift+CTRL+I), selecting the Storage tab, and selecting Application Cache: Notice that you view the status of the Application Cache. In the screen shot above, the status is UNCACHED which means that the files listed in the manifest have not been downloaded and cached yet. The different possible values for the status are included in the HTML5 Offline Web Application standard: UNCACHED – The Application Cache has not been initialized. IDLE – The Application Cache is not currently being updated. CHECKING – The Application Cache is being fetched and checked for updates. DOWNLOADING – The files in the Application Cache are being updated. UPDATEREADY – There is a new version of the Application. OBSOLETE – The contents of the Application Cache are obsolete. Summary In this blog entry, I provided a description of how you can use the HTML5 Offline Web Application feature in the context of an ASP.NET application. I described how this feature is used with the JavaScript Reference Application to store the entire application on a user’s computer. By taking advantage of this new feature of the HTML5 standard, you can improve the performance of your ASP.NET web applications by requiring users of your web application to download your application once and only once. Furthermore, you can enable users to take advantage of your applications anywhere -- regardless of whether or not they are connected to the Internet.

  Read the article

• Partner Webcast – More out of Database Appliance with DB Options - 13 September 2012

  - by Thanos

  The Oracle Database Appliance is a new way to take advantage of the world's most popular database—Oracle Database 11g —in a single, easy-to-deploy and manage system. It's a complete package of software, server, storage, and networking that's engineered for simplicity; saving time and money by simplifying deployment, maintenance, and support of database workloads. But that is not all, with the support for all Oracle Database Options, Oracle Database Appliance can be the ideal solution for many use cases. Feature Benefit Simplifies deployment, maintenance, and support of high-availability database workloads Saves significant time and effort throughout the database administration lifecycle An engineered system of software, server, storage, and networking High availability for a wide range of custom and packaged OLTP and data warehousing application databases Simple one-button Installation, full-stack integrated patching and diagnostics Reduces planned and unplanned downtime by automatically monitoring and logging service requests with Oracle Support Built using the world’s #1 database Protects databases from server and storage failures with Oracle Real Application Clusters and Automatic Storage Management Unique Pay-As-You-Grow software licensing Reduces cost with flexibility to adjust your software spend as your business grows without the need for any hardware upgrades Discover the Oracle Database Appliance Value Proposition and learn how to position and combine it with database options to capture new business and easily roll out solutions safely and with maximum cost efficiency. This webcast is repeated once again for your benefit. Agenda: Oracle Database& Engineered Systems Innovation. What’s the Oracle Database Appliance ? Oracle Database Appliance Value Proposition. Oracle Database Appliance with Database Options Oracle Database Appliance Partners Business Delivery FormatThis FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24hours prior to start time may not receive confirmation to attend. Duration: 1 hour Register Now! Oracle Database Appliance is available for purchase at the Oracle Store under Engineered Systems. For any questions please contact us at partner.imc-AT-beehiveonline.oracle-DOT-com Visit regularly our ISV Migration Center blog Or Follow us @oracleimc to learn more on Oracle Technologies as well as upcoming partner webcasts and events.

  Read the article

• CloudBerry Online Backup 1.5 for Windows Home Server

  - by The Geek

  Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

  Read the article

• Flash Technology Can Revolutionize your IT Infrastructure

  - by kimberly.billings

  A recent article in the Data Center Journal written by Mark Teter outlines how flash is becoming a disruptive technology in the data center and how it will soon replace HDDs in the storage hierarchy. As Teter explains, the drivers behind this trend are lower cost/performance and power savings; flash is over 100x faster for reads than the fastest HDD, and while it is expensive, it can produce dramatic reductions in the cost of performance as measured in Input/Outputs per second (IOPS). What's more, flash consumes 1/5th the power of HDD, so it's faster AND greener. Teter writes, "when appropriately used, flash turns the current economics of IT performance on its head. That's disruptive." Exadata Smart Flash Cache in the Sun Oracle Database Machine makes intelligent use of flash storage to deliver extreme performance for OLTP and mixed workloads. It intelligently caches data from the Oracle Database replacing slow mechanical I/O operations to disk with very rapid flash memory operations. Exadata Smart Flash Cache is the fundamental technology of the Sun Oracle Database Machine that enables the processing of up to 1 million random I/O operations per second (IOPS), and the scanning of data within Exadata storage at up to 50 GB/second. Are you incorporating flash into your storage strategy? Let us know! Read more: "Flash technology can revolutionize your IT infrastructure", The Data Center Journal, March 30, 2010. Exadata Smart Flash Cache and the Sun Oracle Database Machine white paper var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-13185312-1"); pageTracker._trackPageview(); } catch(err) {}

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >