Search Results

Search found 2778 results on 112 pages for 'ping fm'.

Page 62/112 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Setting up Edimax EW-7206APg as Universal Repeater

  - by Ondra Žižka

  Hi, I've troubles setting up Edimax EW-7206APg as a Universal Repeater. I've read few manuals, but they are unclear on certain points. I've managed the repeater to get to a state when it's in a "connected" state. I've set the same WPA passphrase as the router has because I haven't seen any other place to set it at. These are my settings: System Uptime 0day:1h:33m:11s Hardware Version Rev. A Runtime Code Version 1.32 Wireless Configuration Mode Universal Repeater ESSID edimax Channel Number 6 Security WPA-shared key BSSID 00:c0:9f:40:bd:38 Associated Clients 0 Wireless Repeater Interface Configuration ESSID Dusan Security WPA BSSID 00:4f:62:23:8f:7e State Connected LAN Configuration IP Address 192.168.0.10 Subnet Mask 255.255.255.0 Default Gateway 192.168.0.1 MAC Address 00:c0:9f:40:bd:37 This is ipconfig /all: Prípona DNS podle pripojení . . . : riomail.cz Popis . . . . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection Fyzická Adresa. . . . . . . . . . : 00-0E-35-3D-77-68 Protokol DHCP povolen . . . . . . : Ano Automatická konfigurace povolena : Ano Adresa IP . . . . . . . . . . . . : 192.168.0.5 Maska podsíte . . . . . . . . . . : 255.255.255.0 Výchozí brána . . . . . . . . . . : 192.168.0.1 Server DHCP . . . . . . . . . . . : 192.168.0.1 Servery DNS . . . . . . . . . . . : 94.74.192.252 94.74.192.244 I can ping the repeater, I can ping the root AP, but not a DNS server or any other IP beyond the root AP. Anyone has an idea what's wrong? Thanks, Ondra

  Read the article

• Weird networking problem ( Linksys, Windows 7 )

  - by Rohit Nair

  Okay it's a bit tough to figure out where to start from, but here is the basic summary of the issue: During general internet usage, there are times when any attempt to visit a website stalls at "Waiting for somedomain.com". This problem occurs in Firefox, IE and Chrome. No website will load, INCLUDING the router configuration page at 192.168.1.1. Curiously, ping works fine, and other network apps such as MSN Messenger continue to work and I can send and receive messages. Disconnecting and reconnecting to the wireless network seems to fix the problem for a bit, but there are times when it relapses into not loading after every 2-3 http requests. Restarting the router seems to fix the issue, but it can crop up hours or days later. I have a CCNA cert and I know my way around the Windows family of operating systems, so I'm going to list all the things I've tried here. Other computers on the network seem to suffer the same problem, which makes me think it might be a specific problem with something in Win7. The random nature of this issue makes it a bit difficult to confirm, but I can definitely say that I have experienced this on the following systems: Windows 7 64-bit on my desktop Windows Vista 32-bit on my desktop ( the desktop has 2 wireless NICs and the problem existed on both ) Windows Vista 32-bit on my laptop ( both with wireless and wired ) Windows XP SP3 on another laptop ( both wireless and wired ) Using Wireshark to sniff packets seemed to indicate that although HTTP requests were being SENT out, no packets were coming in to respond to the HTTP request. However, other network apps continued to work i.e I would still receive IMs on Windows Live Messenger. Disabling IPV6 had no effect. Updating router firmware to the latest stock firmware by Linksys had no effect. Switching to dd-wrt firmware had no effect. By "no effect" I mean that although the restart required by firmware updates fixed the problem at the time, it still came back. A couple of weeks back, after a LOT of googling and flipping of various options, I figured it might be a case of router slowdown ( http://www.dd-wrt.com/wiki/index.php/Router%5FSlowdown ) caused by the fact that I occasionally run a torrent client. I tried changing the configuration as suggested in that router slowdown link, and restarted the router. However I have not run the torrent client for 12 days now, and yet I still randomly experience this problem. Currently the computer I am using is running Windows 7 64-bit. I would just like to reiterate some of the reasons that I was confused by the issue. Even the router config page at 192.168.1.1 would not load, indicating that it's not a problem with the WAN link, but probably a router issue or a local computer issue. For some reason, disconnecting and reconnecting to the wireless network immediately seems to fix the problem. Updating the router firmware, even switching to open source firmware did nothing. So it seemed to be a computer issue. On the other hand, I have not seen any mass outrage of people having networking problems with Windows 7 and Linksys routers, especially a problem of this sort, and I have tweaked every network setting I could think of. Although HTTP seems to have trouble, ping works fine, DNS lookups work fine, other networking apps work fine. However if I disconnect from Windows Live Messenger and try to reconnect, it fails to reconnect. So although it could receive data over the existing TCP/IP connection, trying to start a new one failed? Does anyone have any further ideas on debugging or fixing this issue? I am reasonably certain there are no viruses or other malicious apps on my network, and I am also reasonably certain that nobody is accessing my router without my consent. Router: Linksys WRT54G2 1.0 running dd-wrt firmware Wireless Card: Alfa AWUS036H OS: Windows 7 64-bit EDIT: I tried switching to a clean wireless channel free from interference, but the problem still persisted. I tried connecting directly with a cable, but the problem still persisted. Signed A very confused and bewildered geek whose knowledge seems to be useless in the face of this frustrating network issue.

  Read the article

• xen debian: domU can't get out side

  - by iftol

  hi every body. i'm a trainee as a sysAdmin, it is my first expérience with virtualization. i have a server setup debian xen 3 with 2 physical interfaces. eth 0 for local network 10.0.0.1 and eth1 for internet (194.X.X.4). i created 3 VMs (web server, mail server and dabase server) with local ip addresses 172.10.0.x/24. the problem i had first is that domU can't ping dom0. i asked the sysAdmin of our ISP and he sais that he fogot to setup the bridginb. so he ceated a bridge with 172.10.0.1/24 after that i was able to ping the real server (194.X.X.4). but i can't go out side from my VMs, how can i fixe this issue? real or physical server ifconfig eth0 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:10.1.3.12 Bcast:10.1.3.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb4/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:412006 errors:0 dropped:0 overruns:0 frame:0 TX packets:411296 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:31410957 (29.9 MiB) TX bytes:31178370 (29.7 MiB) Interruption:36 Mémoire:d6000000-d6012100 eth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:194.x.x.4 Bcast:194.254.167.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb6/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25872332 errors:0 dropped:0 overruns:0 frame:0 TX packets:414578 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:2642278343 (2.4 GiB) TX bytes:35436775 (33.7 MiB) lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1308073 errors:0 dropped:0 overruns:0 frame:0 TX packets:1308073 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:109871395 (104.7 MiB) TX bytes:109871395 (104.7 MiB) peth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:31818694 errors:0 dropped:0 overruns:0 frame:0 TX packets:414818 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:5197318822 (4.8 GiB) TX bytes:37904897 (36.1 MiB) Interruption:48 Mémoire:d8000000-d8012100 vif281.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:207 errors:0 dropped:0 overruns:0 frame:0 TX packets:298 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:24629 (24.0 KiB) TX bytes:28404 (27.7 KiB) vif281.1 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:45 errors:0 dropped:47063 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:0 (0.0 B) TX bytes:4449 (4.3 KiB) vif282.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:78 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:5041 (4.9 KiB) TX bytes:714 (714.0 B) xenbr0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet adr:172.10.0.1 Bcast:172.10.0.255 Masque:255.255.255.0 adr inet6: fe80::5c72:c6ff:fe49:7fe/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7180 errors:0 dropped:0 overruns:0 frame:0 TX packets:8615 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:756804 (739.0 KiB) TX bytes:791206 (772.6 KiB) brtcl show bridge name bridge id STP enabled interfaces eth1 8000.0026b984ceb6 no peth1 vif281.1 xenbr0 8000.feffffffffff no vif281.0 vif282.0 network-multi-bridge /etc/xen/scripts/network-virtual start vifnum="0" bridgeip="172.10.0.1/24" brnet="172.10.0.0/24" VM webserver eth0 Link encap:Ethernet HWaddr 00:16:3E:42:33:70 inet addr:172.10.0.2 Bcast:172.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe42:3370/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:126 (126.0 b) TX bytes:2036 (1.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Thank you for your help.

  Read the article

• iptable CLUSTERIP won't work

  - by Rad Akefirad

  We have some requirements which explained here. We tried to satisfy them without any success as described. Here is the brief information: Here are requirements: 1. High Availability 2. Load Balancing Current Configuration: Server #1: one static (real) IP for each 10.17.243.11 Server #2: one static (real) IP for each 10.17.243.12 Cluster (virtual and shared among all servers) IP: 10.17.243.15 I tried to use CLUSTERIP to have the cluster IP by the following: on the server #1 iptables -I INPUT -i eth0 -d 10.17.243.15 -j CLUSTERIP --new --hashmode sourceip --clustermac 01:00:5E:00:00:20 --total-nodes 2 --local-node 1 on the server #2 iptables -I INPUT -i eth0 -d 10.17.243.15 -j CLUSTERIP --new --hashmode sourceip --clustermac 01:00:5E:00:00:20 --total-nodes 2 --local-node 2 When we try to ping 10.17.243.15 there is no reply. And the web service (tomcat on port 8080) is not accessible either. However we managed to get the packets on both servers by using TCPDUMP. Some useful information: iptable roules (iptables -L -n -v): Chain INPUT (policy ACCEPT 21775 packets, 1470K bytes) pkts bytes target prot opt in out source destination 0 0 CLUSTERIP all -- eth0 * 0.0.0.0/0 10.17.243.15 CLUSTERIP hashmode=sourceip clustermac=01:00:5E:00:00:20 total_nodes=2 local_node=1 hash_init=0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 14078 packets, 44M bytes) pkts bytes target prot opt in out source destination Log messages: ... kernel: [ 7.329017] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None ... kernel: [ 7.329133] e1000e 0000:05:00.0: eth3: 10/100 speed: disabling TSO ... kernel: [ 7.329567] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready ... kernel: [ 71.333285] ip_tables: (C) 2000-2006 Netfilter Core Team ... kernel: [ 71.341804] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ... kernel: [ 71.343168] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully ... kernel: [ 108.456043] device eth0 entered promiscuous mode ... kernel: [ 112.678859] device eth0 left promiscuous mode ... kernel: [ 117.916050] device eth0 entered promiscuous mode ... kernel: [ 140.168848] device eth0 left promiscuous mode TCPDUMP while pinging: tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 12:11:55.335528 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2390, length 64 12:11:56.335778 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2391, length 64 12:11:57.336010 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2392, length 64 12:11:58.336287 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2393, length 64 And there is no ping reply as I said. Does anyone know which part I missed? Thanks in advance.

  Read the article

• windows 2003 server : can't join domain

  - by phill

  I originally tried to rejoin a computer to a network which led to a "cannot find domain" error. The username/password box don't even come up. some tests i ran: I can ping the server, however I can't ping the domain name domain1.local. nslookup can't find the domain either. It looks to the isp's dns instead of my own to resolve the local machines. So i go to the dns and run netdiag.exe and gives me this error. DNS test . . . . . . . . . . . . . : Failed [WARNING] Cannot find a primary authoritative DNS server for the name 'stmartinsrv.stmartin.local.'. [RCODE_SERVER_FAILURE] The name 'srv.domain1.local.' may not be registered in DNS. [WARNING] The DNS entries for this DC are not registered correctly on DNS se rver '68.94.156.1'. Please wait for 30 minutes for DNS server replication. [WARNING] The DNS entries for this DC are not registered correctly on DNS se rver '68.94.157.1'. Please wait for 30 minutes for DNS server replication. [FATAL] No DNS servers have the DNS records for this DC registered. Redir and Browser test . . . . . . : Passed List of NetBt transports currently bound to the Redir NetBT_Tcpip_{04BB0F6B-06AE-4D60-80C8-2A7A24C1D87B} The redir is bound to 1 NetBt transport. List of NetBt transports currently bound to the browser NetBT_Tcpip_{04BB0F6B-06AE-4D60-80C8-2A7A24C1D87B} The browser is bound to 1 NetBt transport. then running dcdiag C:\Program Files\Support Toolsdcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SRV Starting test: Connectivity The host 1c99f63c-49ec-40db-b3d3-6265c00fbd3e._msdcs.domain1.local cou ld not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (1c99f63c-49ec-40db-b3d3-6265c00fbd3e._msdcs.domain1.local) couldn't be resolved, the server name (srv.domain1.local) resolved to the IP address (192.168.1.21) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... SRV failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SRV Skipping all tests, because server SRV is not responding to directory service requests Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : domain1 Starting test: CrossRefValidation ......................... domain1 passed test CrossRefValidation Starting test: CheckSDRefDom ......................... domain1 passed test CheckSDRefDom Running enterprise tests on : domain1.local Starting test: Intersite ......................... domain1.local passed test Intersite Starting test: FsmoCheck ......................... domain1.local passed test FsmoCheck from previous postings, I've tried adding the domain suffix to the nic ip properties to both the client machine and the dc server which didn't help. note: there is only one nic on the server any ideas? thanks in advance

  Read the article

• Kernel panic when bringing up DRBD resource

  - by sc.

  I'm trying to set up two machines synchonizing with DRBD. The storage is setup as follows: PV - LVM - DRBD - CLVM - GFS2. DRBD is set up in dual primary mode. The first server is set up and running fine in primary mode. The drives on the first server have data on them. I've set up the second server and I'm trying to bring up the DRBD resources. I created all the base LVM's to match the first server. After initializing the resources with `` drbdadm create-md storage I'm bringing up the resources by issuing drbdadm up storage After issuing that command, I get a kernel panic and the server reboots in 30 seconds. Here's a screen capture. My configuration is as follows: OS: CentOS 6 uname -a Linux host.structuralcomponents.net 2.6.32-279.5.2.el6.x86_64 #1 SMP Fri Aug 24 01:07:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux rpm -qa | grep drbd kmod-drbd84-8.4.1-2.el6.elrepo.x86_64 drbd84-utils-8.4.1-2.el6.elrepo.x86_64 cat /etc/drbd.d/global_common.conf global { usage-count yes; # minor-count dialog-refresh disable-ip-verification } common { handlers { pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o /proc/sysrq-trigger ; halt -f"; # fence-peer "/usr/lib/drbd/crm-fence-peer.sh"; # split-brain "/usr/lib/drbd/notify-split-brain.sh root"; # out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root"; # before-resync-target "/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k"; # after-resync-target /usr/lib/drbd/unsnapshot-resync-target-lvm.sh; } startup { # wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb become-primary-on both; wfc-timeout 30; degr-wfc-timeout 10; outdated-wfc-timeout 10; } options { # cpu-mask on-no-data-accessible } disk { # size max-bio-bvecs on-io-error fencing disk-barrier disk-flushes # disk-drain md-flushes resync-rate resync-after al-extents # c-plan-ahead c-delay-target c-fill-target c-max-rate # c-min-rate disk-timeout } net { # protocol timeout max-epoch-size max-buffers unplug-watermark # connect-int ping-int sndbuf-size rcvbuf-size ko-count # allow-two-primaries cram-hmac-alg shared-secret after-sb-0pri # after-sb-1pri after-sb-2pri always-asbp rr-conflict # ping-timeout data-integrity-alg tcp-cork on-congestion # congestion-fill congestion-extents csums-alg verify-alg # use-rle protocol C; allow-two-primaries yes; after-sb-0pri discard-zero-changes; after-sb-1pri discard-secondary; after-sb-2pri disconnect; } } cat /etc/drbd.d/storage.res resource storage { device /dev/drbd0; meta-disk internal; on host.structuralcomponents.net { address 10.10.1.120:7788; disk /dev/vg_storage/lv_storage; } on host2.structuralcomponents.net { address 10.10.1.121:7788; disk /dev/vg_storage/lv_storage; } /var/log/messages is not logging anything about the crash. I've been trying to find a cause of this but I've come up with nothing. Can anyone help me out? Thanks.

  Read the article

• Multiple Homed Windows 2008 Server / Windows 7 Client

  - by Daniel Scott

  I have a small Windows 2008 network, with some Windows 7 clients. The clients are both laptops with docking stations and I would like them to communicate with the Windows 2008 server (for filesharing) through the wired network whilst they're docked. Internet connectivity for all machines (clients and server) is via a Wireless LAN, so the wireless adapter in the Windows 7 clients stays active while they're docked. When the laptops are un-docked, it would be nice to still be able to contact the windows 2008 server for print sharing (and slower file sharing) - hence the server also being on the wireless LAN. The windows 2008 server is running Active Directory, DHCP and DNS. It controls DHCP leases on the wired network and holds the DNS records for "myserver.mycompany.local", which is what the filesharing clients connect to. Ideally I'd like the DNS records to return the wired IP first so that this is the address that the laptops will attempt initially - but there doesn't seem to be a way to do that? At present the server's IP on the wireless LAN comes out of an nslookup above the wired Lan IP. The multi-homing works perfectly - but in the wrong order! Switch on the wireless lan and ping myserver and it goes to the wireless IP. Disable the wireless on the client and do the same ping again and after a couple of seconds it starts pinging the wired address. Does anyone have any suggestions on how to make this work in a predictable order? - or even if it can work. Alternative 1? If it can't work, then would this work: Remove the wireless adapter from the server, put a wireless router/bridge on the wired network (set up to route to/from the wireless LAN's subnet), then configure the clients with two routes to the (now) single IP of the server with metrics favouring direct communication over the wired LAN first? Alternative 2? Should I instead single-home the laptops so all of their connectivity is via the wired-LAN while they're docked? (and route via the windows 2008 server - or a dedicated wireless bridge/router)? My concern here is that I'd like undocking to be seamless - and if the clients are in the middle of downloading something from the internet I wouldn't want whatever they're doing interupted as they switch IP addresses onto the Wireless network. Perhaps this isn't the case and I'm concerned over nothing? Any thoughts? :) UPDATE I seem to have cracked it (at least DNS entries come out in the order I hope for - and pinging the server with various combinations of wired, wireless and both interfaces enabled uses the IP I want) ... I set the binding order of the NICs on the Server (which is acting as Domain Controller, DHCP and DNS server) so that the Wired NIC is before the Wireless adapter. (Start -- type "Network Interfaces" -- Select "View Network Connections" -- Press Alt to show classic dropdown menus -- Advanced -- Advanced Settings) Now, an nslookup (from the client) of the server's hostname returns the Wired IP first, followed by the Wireless IP. The wired IP now seems to be used whenever it's contactable. Incidentally, the metrics on the wired and wireless routes (on the client) also favour the wired LAN (based on Windows' automatically assigned metrics) - but this was always the case, even when I was having trouble getting the wired IP to be "favoured". I'm not entirely sure if this is coincidence - or if a DNS server running on Windows, handing back IP addresses for itself does actually take the binding order of it's own network interfaces into account? It would be interesting to hear from someone who can confirm or deny that (or confirm that the binding order on the server plays a role for some other reason?)

  Read the article

• how does openvpn decide which interface to get IP addrs from

  - by bkrupa

  Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on? edit I am trying to set up a vpn so that I can connect to my home network from a remote network. It seems like openvpn is connecting but none of the computers on my home network appear as network machines even after the connection is "Established". Stripped versions of the client and server config files are posted below. Thanks for any help you can offer. server.conf port 1194 proto udp dev tap ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret dh /etc/openvpn/easy-rsa/keys/dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 client.conf client dev tap dev-node tap0901 proto udp remote ********** 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client1.crt key client1.key comp-lzo verb 3 one other thing that might be helpful, I tried to connect using the openvpn gui for windows and the connection stalls out on "obtaining configuration" and the bar just scrolls forever.

  Read the article

• bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

  - by leeand00

  I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

  Read the article

• How to configure multiple iSCSI Portal Groups on a EqualLogic PS6100?

  - by kce

  I am working on a migration from a VMware vSphere environment to a Hyper-V Cluster utilizing Windows Server 2012 R2. The setup is pretty small, an EqualLogic PS6100e and two Dell PowerConnect 5424 switches and handful of R710s and R620s. The SAN was configured as a non-RFC1918 network that is not assigned to our organization and since I am working on building a new virtualization environment I figured that this would be an appropriate time to do a subnet migration. I configured a separate VLAN and subnet on the switches and the two previously unused NICs on the PS6100's controllers. At this time I only have a single Hyper-V host cabled in but I can successfully ping the PS6100 from the host. From the PS6100 I can ping each of the four NICs that currently on the storage network. I cannot connect the Microsoft iSCSI Initiator to the Target. I have successfully added the Target Portals (the IP addresses of PS6100 NICs) and the Targets are discovered but listed as inactive. If I try to Connect to them I get the following error, "Log onto Target - Connection Failed" and ISCSIPrt 1 and 70 events are recorded in the Event Log. I have verified that access control to the volume is not the problem by temporarily disabling it. I suspect the problem is with the Portal Group IP address which is still listed as Group Address of old subnet (I know, I know I might be committing the sin of the X/Y problem but everything else looks good): RFC3720 has this to say about Network Portal and Portal Groups: Network Portal: The Network Portal is a component of a Network Entity that has a TCP/IP network address and that may be used by an iSCSI Node within that Network Entity for the connection(s) within one of its iSCSI sessions. A Network Portal in an initiator is identified by its IP address. A Network Portal in a target is identified by its IP address and its listening TCP port. Portal Groups: iSCSI supports multiple connections within the same session; some implementations will have the ability to combine connections in a session across multiple Network Portals. A Portal Group defines a set of Network Portals within an iSCSI Network Entity that collectively supports the capability of coordinating a session with connections spanning these portals. Not all Network Portals within a Portal Group need participate in every session connected through that Portal Group. One or more Portal Groups may provide access to an iSCSI Node. Each Network Portal, as utilized by a given iSCSI Node, belongs to exactly one portal group within that node. The EqualLogic Group Manager documentation has this to say about the Group IP Address: You use the group IP address as the iSCSI discovery address when connecting initiators to iSCSI targets in the group. If you modify the group IP address, you might need to change your initiator configuration to use the new discovery address Changing the group IP address disconnects any iSCSI connections to the group and any administrators logged in to the group through the group IP address. Which sounds equivalent to me (I am following up with support to confirm). I think a reasonable explanation at this point is that the Initiator can't complete the connection to the Target because the Group IP Address / Network Portal is on a different subnet. I really want to avoid a cutover and would prefer to run both subnets side-by-side until I can install and configure each Hyper-V host. Question/s: Is my assessment at all reasonable? Is it possible to configure multiple Group IP Addresses on the EqualLogic PS6100? I don't want to just change it as it will disconnect the remaining ESXi hosts. Am I just Doing It Wrong(TM)?

  Read the article

• MacBook Pro 10.6 losing dns service, network connection still functional if you know the ip address.

  - by Vincent

  MacBook pro connected to a wireless network (not sure about wired) I lose DNS. I still have a functioning connection and as long as I know the ip address of the website, server... for example skype works, ssh name@ipaddress, .... Things can be working properly and then just quit, Once I was im via skype and lost dns skype continued to work. This has happened in multiple locations on private and public networks. What does not work/fix it: Resetting router changing dns server on computer or router connecting to another network removing the airport interface and adding it back flushing dns The only solution seems to be a restart. A solution to this would be great, but any ideas of this to try would be great. Even a sure way to reproduce this would be useful. Maybe related question: But this is most definitely not true for me. "if I refresh enough -- 3 to 4 times --, it will usually pull up the site. " Here are some tests from terminal. Basically this confirms dns in not functioning vmd17:~ vmd$ ping google.com ping: cannot resolve google.com: Unknown host Trace route to google dns, This works vmd17:~ vmd$ /usr/sbin/traceroute -n -w 2 -q 2 -m 30 8.8.8.8 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 52 byte packets 1 192.168.1.1 5.195 ms 2.519 ms 2 67.172.136.1 31.881 ms 9.177 ms 3 68.85.107.121 12.168 ms 10.003 ms 4 68.86.103.41 12.021 ms 9.594 ms 5 68.86.91.1 16.712 ms 12.837 ms 6 68.86.86.210 29.951 ms 25.826 ms 7 68.86.87.218 29.554 ms 42.894 ms 8 75.149.231.70 68.271 ms 68.362 ms 9 72.14.233.77 141.178 ms 72.14.233.85 82.553 ms 10 72.14.238.243 83.381 ms 82.811 ms 11 72.14.232.213 194.387 ms 72.14.232.215 84.837 ms 12 209.85.253.145 100.294 ms * 13 8.8.8.8 101.689 ms 89.694 ms 208.67.222.22 is the ip address of opendns dns server vmd17:~ vmd$ dig @208.67.222.222 8.8.8.8 ; <<>> DiG 9.6.0-APPLE-P2 <<>> @208.67.222.222 8.8.8.8 ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached vmd17:~ vmd$ dig @208.67.222.222 gogle.com vmd17:~ vmd$ dig @208.67.222.222 google.com ; <<>> DiG 9.6.0-APPLE-P2 <<>> @208.67.222.222 google.com ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached vmd17:~ vmd$ dig @8.8.8.8 google.com ; <<>> DiG 9.6.0-APPLE-P2 <<>> @8.8.8.8 google.com ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached

  Read the article

• vlans on openvz, centos 6

  - by arheops

  i have centos 6 with openvz installed on it, switch with vlan support. I need following setup: 1) eth0 on openvz have be tagged multiple vlans. 2) each virtualhost have to be in single vlan. yes,i already read wiki on openvz, but it is just not work. I have on main server interface eth0.108 and able ping address on that interface(using nootbook on untagged port vlan 108), but i not able ping address inside container. Main node: [root@box1 conf]# ifconfig eth0 Link encap:Ethernet HWaddr D0:67:E5:F4:11:60 inet6 addr: fe80::d267:e5ff:fef4:1160/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:506 errors:0 dropped:0 overruns:0 frame:0 TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:68939 (67.3 KiB) TX bytes:1780 (1.7 KiB) Interrupt:16 Memory:c0000000-c0012800 eth0.108 Link encap:Ethernet HWaddr D0:67:E5:F4:11:60 inet addr:10.11.108.3 Bcast:10.11.111.255 Mask:255.255.252.0 inet6 addr: fe80::d267:e5ff:fef4:1160/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:238 errors:0 dropped:0 overruns:0 frame:0 TX packets:19 errors:0 dropped:12 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:25890 (25.2 KiB) TX bytes:926 (926.0 b) eth1 Link encap:Ethernet HWaddr D0:67:E5:F4:11:61 inet addr:192.168.23.233 Bcast:192.168.23.255 Mask:255.255.255.0 inet6 addr: fe80::d267:e5ff:fef4:1161/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1967 errors:0 dropped:0 overruns:0 frame:0 TX packets:356 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:365298 (356.7 KiB) TX bytes:115007 (112.3 KiB) Interrupt:17 Memory:c2000000-c2012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:784 (784.0 b) TX bytes:784 (784.0 b) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet6 addr: fe80::1/128 Scope:Link UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:3 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) veth108.0 Link encap:Ethernet HWaddr 00:18:51:DA:94:D5 inet6 addr: fe80::218:51ff:feda:94d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:639 errors:0 dropped:0 overruns:0 frame:0 TX packets:5 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17996 (17.5 KiB) TX bytes:308 (308.0 b) virtual node [root@pbx108 /]# ifconfig eth0.108 Link encap:Ethernet HWaddr 00:18:51:CA:B5:C5 inet addr:10.11.108.1 Bcast:10.11.111.255 Mask:255.255.252.0 inet6 addr: fe80::218:51ff:feca:b5c5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:685 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:308 (308.0 b) TX bytes:19284 (18.8 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:683 errors:0 dropped:0 overruns:0 frame:0 TX packets:683 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76288 (74.5 KiB) TX bytes:76288 (74.5 KiB) /etc/vz/conf/108.conf # RAM PHYSPAGES="0:4000M" # Swap SWAPPAGES="0:512M" # Disk quota parameters (in form of softlimit:hardlimit) DISKSPACE="200G:200G" DISKINODES="20000000:22000000" QUOTATIME="0" # CPU fair scheduler parameter CPUUNITS="4000" VE_ROOT="/vz/root/$VEID" VE_PRIVATE="/vz/private/$VEID" OSTEMPLATE="centos-6-x86_64" ORIGIN_SAMPLE="vswap-256m" NETIF="ifname=eth0.108,mac=00:18:51:CA:B5:C5,host_ifname=veth108.0,host_mac=00:18:51:DA:94:D5" NAMESERVER="8.8.8.8" HOSTNAME="pbx108.localhost" IP_ADDRESS=""

  Read the article

• Openvpn issue with linux

  - by catsy

  So I've tried to setup openvpn, I followed some guide but it's stuck att "initialization sequence completed" with no connection and I can't find any working solution... here's the log: $Sun Sep 23 19:14:32 2012 OpenVPN 2.1.0 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 20 2010 Enter Auth Username:pumpedup Enter Auth Password: Sun Sep 23 19:14:37 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Sun Sep 23 19:14:37 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sun Sep 23 19:14:37 2012 LZO compression initialized Sun Sep 23 19:14:37 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Sun Sep 23 19:14:38 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sun Sep 23 19:14:38 2012 Local Options hash (VER=V4): '41690919' Sun Sep 23 19:14:38 2012 Expected Remote Options hash (VER=V4): '530fdded' Sun Sep 23 19:14:38 2012 Socket Buffers: R=[163840-131072] S=[163840-131072] Sun Sep 23 19:14:38 2012 UDPv4 link local: [undef] Sun Sep 23 19:14:38 2012 UDPv4 link remote: [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:38 2012 TLS: Initial packet from [AF_INET]192.162.102.162:1194, sid=87a95723 a6d7b7f9 Sun Sep 23 19:14:38 2012 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Sun Sep 23 19:14:38 2012 VERIFY OK: depth=1, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=nVpn_CA/[email protected] Sun Sep 23 19:14:38 2012 VERIFY OK: depth=0, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=server/[email protected] Sun Sep 23 19:14:39 2012 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1542', remote='link-mtu 6042' Sun Sep 23 19:14:39 2012 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1500', remote='tun-mtu 6000' Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sun Sep 23 19:14:39 2012 [server] Peer Connection Initiated with [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:41 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Sun Sep 23 19:14:41 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.8.8,route 10.102.162.1,topology net30,ping 10,ping-restart 120,ifconfig 10.102.162.6 10.102.162.5' Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: timers and/or timeouts modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ifconfig/up options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: route options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sun Sep 23 19:14:41 2012 ROUTE default_gateway=10.0.2.2 Sun Sep 23 19:14:41 2012 TUN/TAP device tun0 opened Sun Sep 23 19:14:41 2012 TUN/TAP TX queue length set to 100 Sun Sep 23 19:14:41 2012 /sbin/ifconfig tun0 10.102.162.6 pointopoint 10.102.162.5 mtu 1500 Sun Sep 23 19:14:41 2012 /sbin/route add -net 192.162.102.162 netmask 255.255.255.255 gw 10.0.2.2 Sun Sep 23 19:14:41 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 10.102.162.1 netmask 255.255.255.255 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 Initialization Sequence Completed

  Read the article

• ASA 5505 stops local internet when connected to VPN

  - by g18c

  Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

  Read the article

• KVM with one host IP and a different subnet for machines

  - by Jguy

  I've already setup a KVM host with proper IP configurations, but my host had me create DHCP and use that to assign the IP's to the machines. I want to see if there's an easier way to do it (or better). Upon my first setting out on this, I didn't find anything that pointed me in the right direction. I'm coming off a fresh install of Debian 6.0 x64, so I have nothing installed. I've logged in, queried for the below information and changed the password from my host set one. I have a Debian 6.0 x64 system with the following initial network configuration (substituted 255 in place of my real first octave): # tail /etc/network/interfaces auto eth0 iface eth0 inet static address 255.9.24.80 broadcast 255.9.24.95 netmask 255.255.255.224 gateway 255.9.24.65 # default route to access subnet up route add -net 255.9.24.64 netmask 255.255.255.224 gw 255.9.24.65 eth0 I have a /29 subnet that I want the virtual machines to use from my host: IP: 255.46.187.152 /29 Mask: 255.255.255.248 Broadcast: 255.46.187.159 Usable IP addresses: 255.46.187.153 to 255.46.187.158 I like the interface of Cloudmin, so I want to try and use that if I can to administrate my guests. So, my questions: How do I set this up on the host system the best so that I can use the additional Subnet IP's on the guests and have them accessible from the internet? I also need to host a DNS server, which means one of these VM's has to have two IP's assigned to it and accessable from the outside world. How can I do that using Cloudmin? I had a question about this here: Multiple IP addresses assigned to one KVM VM But I just reformatted the entire server and am trying to figure out a better way of doing this. Machine information: # ip route show 255.9.24.64/27 via 255.9.24.65 dev eth0 255.9.24.64/27 dev eth0 proto kernel scope link src 255.9.24.80 default via 255.9.24.65 dev eth0 brctl is empty # ip addr list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether c8:60:00:54:b5:d8 brd ff:ff:ff:ff:ff:ff inet 255.9.24.80/27 brd 255.9.24.95 scope global eth0 inet6 fe80::ca60:ff:fe54:b5d8/64 scope link valid_lft forever preferred_lft forever Thank you for any help you can provide me. EDIT: I've installed kvm and cloudmin: aptitude install qemu-kvm libvirt-bin wget http://cloudmin.virtualmin.com/gpl/scripts/cloudmin-kvm-debian-install.sh ./cloudmin-kvm-debian-install.sh Rebooted and now my network configuration looks like this: # device: eth0 iface eth0 inet manual # default route to access subnet iface br0 inet static address 255.9.24.80 netmask 255.255.255.224 broadcast 255.9.24.95 network 255.9.24.64 bridge_ports eth0 gateway 255.9.24.65 I setup in Cloudmin the Start IP as 255.46.187.153 and End IP as 255.46.187.158. The CIDR is 29 and the gateway is 255.46.187.152. I've installed a guest with ubuntuserver 12.04 x64, which was able to get and retrieve internet resources during installation, but now cannot reach anything nor can it be reached from anything. Its network configuration is: iface eth0 inet static address 255.46.187.153 netmask 255.255.255.224 broadcast 255.46.187.159 gateway 255.46.187.152 dns-nameservers <host provided nameservers> And is not able to ping google.com through DNS or direct IP, I can't ping the VM from the outside or the host. any ideas now?

  Read the article

• Solaris 10 branded zone VM Templates for Solaris 11 on OTN

  - by jsavit

  Early this year I wrote the article Ours Goes To 11 which describes the ability to import Solaris 10 systems into a "Solaris 10 branded zone" under Oracle Solaris 11. I did this using Solaris 11 Express, and the capability remains in Solaris 11 with only slight changes. This important tool lets you painlessly inhaling a Solaris Container from Solaris 10 or entire Solaris 10 systems ("the global zone") into virtualized environments on a Solaris 11 OS. Just recently, Oracle provided Oracle VM Templates for Oracle Solaris 10 Zones to let you create Solaris 10 branded zones for Solaris 11 even if you don't currently have access to install media or a running Solaris 10 system. To use this, just download the Oracle VM Template for Oracle Solaris Zone 10 from OTN at http://www.oracle.com/technetwork/server-storage/solaris11/downloads/virtual-machines-1355605.html. This page contains images of Oracle Solaris 10 8/11 (the recent update to Solaris 10) in SPARC and x86 formats suitable for creating branded zones. The same page also has a VirtualBox image you can download for a complete Solaris 10 install in a guest virtual machine you can run on any host OS that supports VirtualBox. Both sets of downloads provide a quick - and extremely easy - way to set up a virtual Solaris 10 environment. In the case of the Oracle VM Templates, they illustrate several advanced features of Solaris 11. To start, just go to the above link, download the template for the hardware platform (SPARC or x86) you want, and download the README file also linked from that page. Install prerequisites The README file tells you to install the prerequisite Solaris 11 package that implements the Solaris 10 brand. Then you can install instances of zones with that brand. # pkg install pkg:/system/zones/brand/brand-solaris10 Packages to install: 1 Create boot environment: No Create backup boot environment: Yes DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 44/44 0.4/0.4 PHASE ACTIONS Install Phase 74/74 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 That took only a few minutes, and didn't require a reboot. Install the Solaris 10 zone Now it's time to run the downloaded template file. First make it executable via the chmod command, of course. I found that (unlike stated in the README) there was no need to rename the downloaded file to remove the .bin. When you run it you provide several parameters to describe the zone configuration: -a IP address - the IP address and optional netmask for the zone. This is the only mandatory parameter. -z zonename - the name of the zone you would like to create. -i interface - the package will create an exclusive-IP zone using a virtual NIC (vnic) based on this physical interface. In my case, I have a NIC called rge0. -p PATH - specifies the path in which you want the zoneroot to be placed. In my case, I have a ZFS dataset mounted at /zones, and this will create a zoneroot at /zones/s10u10. Kicking it off, you will see a copyright message, and then messages showing progress building the zone, which only takes a few minutes. # ./solaris-10u10-x86.bin -p /zones -a 192.168.1.100 -i rge0 -z s10u10 ... ... Checking disk-space for extraction Ok Extracting in /export/home/CDimages/s10zone/bootimage.ihaqvh ... 100% [===============================] Checking data integrity Ok Checking platform compatibility The host and the image do not have the same Solaris release: host Solaris release: 5.11 image Solaris release: 5.10 Will create a Solaris 10 branded zone. Warning: could not find a defaultrouter Zone won't have any defaultrouter configured IMAGE: ./solaris-10u10-x86.bin ZONE: s10u10 ZONEPATH: /zones/s10u10 INTERFACE: rge0 VNIC: vnicZBI13379 MAC ADDR: 2:8:20:5c:1a:cc IP ADDR: 192.168.1.100 NETMASK: 255.255.255.0 DEFROUTER: NONE TIMEZONE: US/Arizona Checking disk-space for installation Ok Installing in /zones/s10u10 ... 100% [===============================] Using a static exclusive-IP Attaching s10u10 Booting s10u10 Waiting for boot to complete booting... booting... booting... Zone s10u10 booted The zone's root password has been set using the root password of the local host. You can change the zone's root password to further harden the security of the zone: being root, log into the zone from the local host with the command 'zlogin s10u10'. Once logged in, change the root password with the command 'passwd'. The nifty part in my opinion (besides being so easy), is that the zone was created as an exclusive-IP zone on a virtual NIC. This network configuration lets you enforce traffic isolation from other zones, enforce network Quality of Service, and even let the zone set its own characteristics like IP address and packet size. Independence of the zone's network characteristics from the global zone is one of the enhancements in Solaris 10 that make it easier to consolidate zones while preserving their autonomy, yet provide control in a consolidated environment. Let's see what the virtual network environment looks like by issuing commands from the Solaris 11 global zone. First I'll use Old School ifconfig, and then I'll use the new ipadm and dladm commands. # ifconfig -a4 lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=1004943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:d1:18:ac:bc vboxnet0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3 inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255 ether 8:0:27:f8:62:1c # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE yge0 Ethernet unknown 0 unknown yge0 yge1 Ethernet unknown 0 unknown yge1 rge0 Ethernet up 1000 full rge0 vboxnet0 Ethernet up 1000 full vboxnet0 # dladm show-link LINK CLASS MTU STATE OVER yge0 phys 1500 unknown -- yge1 phys 1500 unknown -- rge0 phys 1500 up -- vboxnet0 phys 1500 up -- vnicZBI13379 vnic 1500 up rge0 s10u10/vnicZBI13379 vnic 1500 up rge0 s10u10/net0 vnic 1500 up rge0 # dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/net0 rge0 1000 2:8:20:9d:d0:79 random 0 # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 rge0/_a dhcp ok 192.168.1.3/24 vboxnet0/_a static ok 192.168.56.1/24 lo0/v6 static ok ::1/128 Log into the zone The install step already booted the zone, so lets log into it. Notice how you have to be appropriately privileged to log into a zone. This is my home system so I'm being a bit cavalier, but in a production environment you can give granular control of who can login to which zones. Voila! a Solaris 10 environment under a Solaris 11 kernel. Notice the output from the uname -a and ifconfig commands, and output from a ping to a nearby host. $ zlogin s10u10 zlogin: You lack sufficient privilege to run this command (all privs required) savit@home:~$ sudo zlogin s10u10 Password: [Connected to zone 's10u10' pts/5] Oracle Corporation SunOS 5.10 Generic Patch January 2005 # uname -a SunOS s10u10 5.10 Generic_Virtual i86pc i386 i86pc # ifconfig -a4 lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc # bash bash-3.2# ifconfig -a lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc bash-3.2# ping 192.168.1.2 192.168.1.2 is alive For fun, I configured Apache (setting its configuration file in /etc/apache2) and brought it up. Easy - took just a few minutes. bash-3.2# svcs apache2 STATE STIME FMRI disabled 12:38:46 svc:/network/http:apache2 bash-3.2# svcadm enable apache2 Summary In just a few minutes, I built a functioning virtual Solaris 10 environment under by Solaris 11 system. It was... easy! While I can still do it the manual way (creating and using a system archive), this is a low-effort way to create a Solaris 10 zone on Solaris 11.

  Read the article

• Apachebench on node.js server returning "apr_poll: The timeout specified has expired (70007)" after ~30 requests

  - by Scott

  I just started working with node.js and doing some experimental load testing with ab is returning an error at around 30 requests or so. I've found other pages showing a lot better concurrency numbers than I am such as: http://zgadzaj.com/benchmarking-nodejs-basic-performance-tests-against-apache-php Are there some critical server configuration settings that need done to achieve those numbers? I've watched memory on top and I still see a decent amount of free memory while running ab, watched mongostat as well and not seeing anything that looks suspicious. The command I'm running, and the error is: ab -k -n 100 -c 10 postrockandbeyond.com/ This is ApacheBench, Version 2.0.41-dev <$Revision: 1.121.2.12 $> apache-2.0 Copyright (c) 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/ Copyright (c) 2006 The Apache Software Foundation, http://www.apache.org/ Benchmarking postrockandbeyond.com (be patient)...apr_poll: The timeout specified has expired (70007) Total of 32 requests completed Does anyone have any suggestions on things I should look in to that may be causing this? I'm running it on osx lion, but have also run the same command on the server with the same results. EDIT: I eventually solved this issue. I was using a TTAPI, which was connecting to turntable.fm through websockets. On the homepage, I was connecting on every request. So what was happening was that after a certain number of connections, everything would fall apart. If you're running into the same issue, check out whether you are hitting external services each request.

  Read the article

• Computer speakers receive radio station signal

  - by squircle

  I have a set of Logitech 5.1 speakers where each speaker and the source plug into the subwoofer. I'm using a Griffin Firewave with output from my MacBook Pro, and output from my custom-built desktop with a switch in the middle (built it myself out of an old Belkin A/B parallel switch). Recently, I've noticed that I can hear a local Punjabi radio station being picked up by my speakers, and the volume of this interference increases as I increase the volume of the speakers. I'm fairly sure that this radio station is at the low-end of the FM spectrum, below 90MHz (or it may be at the high end, above 105MHz, my memory isn't infallible). It gets quite annoying as I can't put my audio very loud without the interference. I've tried to put a ferrite core on the input cable just before the 3.5mm jacks plug into the subwoofer. I don't know if putting the same core around all three of the cables (green, black, orange) would negate the effects, but I'm assuming not. There has been no change. Is there any reason why this would be happening? I'm assuming the interference is coming somewhere between the FireWave and the subwoofer, because the noise gets amplified with volume increases. If anybody has any suggestions, I'd be grateful!

  Read the article

• How to use my computer as a Headset device for my phone with Bluetooth?

  - by TheJelly

  I want to extract the audio from my phone (the analog TV and FM/AM receiver mainly) and play it through my computer speakers. There is a headphone jack but it is of non-standard size (probably a micro-jack) and I do not have access to a shop that sells that kind of equipment in my area so doing this with Bluetooth is the only solution I can foresee. Both my laptop and my phone support A2DP but for some reason the service (from the phone) does not show up while I add a new connection and the phone does not let me initiate a connection with any other profile except FTP (although it detects other services in the service list like A2DP and works perfectly fine with other profiles like DUN, HID, OPP, SSP if the connection is started through the computer). I am currently using the latest version of the Toshiba stack, I have tried using WIDCOMM but it refuses to install drivers for both the internal Bluetooth (which is a Broadcom device) and the USB Bluetooth that I use on my desktop. The standard Microsoft stack (generic driver) does install but it does not work with both of my devices as they do not detect any Bluetooth devices when scanning. With BlueSoleil (the default stack that came with the USB Bluetooth) I could set my device as "headset" instead of only "laptop/desktop", and this allowed both my phones to detect my laptop as a device they can use as a headset, but the problem with this stack was that only the older phone could actually connect to my laptop and that the internal Bluetooth could not be used. Basically, I want to set the device type as a "headset" for my phone using the Toshiba stack like I did with BlueSoleil. Is there any way this could be done? Thanks. Image: Device type selection http://i.stack.imgur.com/drjC6.jpg

  Read the article

• Software distribution from web server to client using PHP/FTP

  - by Jenolan

  I develop and maintain a number of add-ons and utilities for various widget (mainly aMember) which generally means I need to install php based codes onto other people's systems. Whilst I have a VPS and have access to rsync and all sorts of yummy tools most of the people I deal with have a basic ftp access and that's all folks. To upload from my local system is also a problem as I am satellite based (two-way) so it is fairly slow and expensive and in any case the files are already on my server. So there is no rsync, fxp, ssh and I can't really install anything as it is obviously not my system, they would be justifiably miffed if I started installing file managers or other things onto their sites. What I have been trying to find is a utility that I can run on my server from the web, preferably php based, that will be like a file manager but a bit different. Two panels. LH-Side the local server .. pretty much like a standard FM application RH-Side ability to login via FTP to the clients system Then I can fiddle as required. The closest thing I have found is net2ftp but it doesn't have the gui interface, at the moment I simply ssh into my server power up ncftp and run that way, but something easier to use would be mucho niceness. Thanks in advance! Larry

  Read the article

• CodePlex Daily Summary for Monday, May 17, 2010

  CodePlex Daily Summary for Monday, May 17, 2010New Projects.NET Essentials Course: .NET Essentials course @ Telerik Academy Training project for the studentsAU/NZ Office 2010 Launch Demos: The AU/NZ Office 2010 Launch Demos are a collection of code samples that were used as part of the Office/SharePoint 2010 launch parties in Australi...CybennyCMS: Very simple CMS system for building sites with ASP.NET with templates for lay-out, content pages with only html content and a xml file for the site...essionPIM: essionPIMGIStance: A library for finding "nearest neighbor" among an in-memory set of positions, in C# and F#. A radius must be specified for making a meaningful s...IP Informer: IP Informer is IP Informer.Kurumsal Ofis Paketi: Kurumsal Ofis Paketi (KOP), Microsoft Ofis 2010 ürünleri için geliştirilmiş eklenti yazılımıdır. KOP, Word ve Excel’de bulunan işlevlerinin genişle...Mockup to XAML: Convert Balsamiq Mockups to XAML. This project supports BMML mockup control conversion using plugins. A standard set of controls are included wit...Open XML Validator: This WPF app give you a brief resume about errors in your Open XML documents.Paint.NET Bulk Image Processor: PDNBulkUpdater is a plug-in for Paint.NET that allows you to efficiently perform operations such as resizing and converting multiple images at the ...PiPiBugNet: PiPiBugNet是一套全新的开源Bug管理系统Roleplay character generator: The roleplay character generator allows the creation of characters for different roleplaying gamesSharePoint User Search WebParts: This project contains SharePoint webparts which provide advanced search configuration and experience for SharePoint 2007. It will be upgrade in few...Spodi: Spodi is created on 22-04-2010TfsPolicyPack: This project will provide a few checkin policies for VS 2010.vccodesandobx: vccodesandobxvccodesandobxvccodesandobxWhiteNile: test project using codeplexNew ReleasesAnimeStore.Net: 1.0.3.0: Build 1.0.3.0 Changes Move some functionality to features (MEF) Filter / Search functionality. Anime hard-copy records storage (e.g Disk Storage ...AU/NZ Office 2010 Launch Demos: Twitter map web part: This is the main twitter map web part download, see the Twitter Map web part page for all the information.Blueset Studio Opensource Projects: 推来: 稳定版本BUtil: BUtil 5.0 Alpha2: The initial implementation of multitasking (except ghost)CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 and 4.0.1 beta: Beta 2 is released here: url http://cassinidev.codeplex.com/releases/view/45456 New in CassiniDev v3.5.1.0/v4.0.1.0 Added .Net 4 / VS10 build. ...CBM-Command: 2010-05-16: Release Notes - 2010-05-16New Features New navigation options: Page Up, Page Down, Top of Directory, Bottom of Directory. See documentation (http:...CCNet Conditional Plugin: CCNet Conditional for CCNet 1.5: A (quick) build of the plugin for CCNet 1.5 to fix the 17365 bug reported by Beakster. This also adds a new condition "timeCondition"CybennyCMS: Cybenny CMS beta 1: The first beta. Includes a small demo site.Data Extracting SDK: Data Extracting SDK v.1.1 RTM: RTM version of Data Extracting SDK.Duckworth Lewis Professional Edition Calculator: DLcalc 2.0: This software can perform all D/L calculations 100% accurately. From version 2.0 onwards, tables for par scores can also be produced.EPiServer CMS Page Type Builder: Page Type Builder 1.2: Release notes can be found in this blog post.Floe IRC Client: Floe IRC Client 2010-05 R5: - Many new context menu options for @s - Ability to select multiple users in the nick list for some operations (kick, ban) - Bunch of minor bug fix...Graffiti CMS Events Plugin: Version 1.0.1: Minor update to previous version to fix bug where deleted posts were still showing in the calendar.Microsoft Research Boogie: 2010-05-16: Binary release of Boogie and Dafny. (Note, Chalice is not pre-built as part of this binary release. To obtain it, you need to build it yourself f...MSBuild Launch Pad (mPad): 1.0 Beta 2: Basic support for sln, csproj, vbproj, vcxproj, shfbproj, ccproj, oxygene and proj files are added. Basic settings (Show Prompt, and Auto Hide) are...Multi-Language Words Memorizer: Memorizer 1.1: Issues fix, XML db update with new words.NShader - HLSL - GLSL - CG - Shader Syntax Highlighter AddIn for Visual Studio: NShader 1.1: New release of NShader! New : - a Visual Studio 2010 port can be installed through the new extension manager : you just have to download NShaderV...PHPExcel: PHPExcel 1.7.3 Production: Want to contribute?Please refer the Contribute page. DonationsDonate via PayPal. If you want to, we can also add your name / company on our Donati...Rollback - A social backup tool.: Rollback Setup 0.5.1.2 Build 48360: Bug fixes for backing up files which are hidden/system. Changes to make builds on 64 bit Windows 7 using VS 2010 Express edition.Rollback - A social backup tool.: Rollback Setup 0.5.1.3: Updated version number.Shake - C# Make: Shake v0.1.20: New: Simple console logger Changes: Command line params helper writes out syntax and samples (like msbuild) Fixes: Assembly info, file task and r...SharePoint User Search WebParts: v0.1 Friendly MOSS 2007 Search WebPart: Very first version of this webpart. A more stabilized version will follow in few days.Team Deploy: Team Deploy 2010 Beta 1: This is the initial release for Team Deploy 2010 for TFS Team Build 2010. All features from Team Build 2.x are functional in this version. Comp...Team Foundation Server Administration Tool: 2.0: TFS Administration Tool 2.0 TFS Administration Tool 2.0 is built on top of the Team Foundation Server 2008 object model and in order to connect to...The Ping Master: v0.9.0.0: Installer for The Ping Master binariesUseful Office Macros: All Macro Downloads: Please find above the downloads related to this project. Each Excel Workbook below works independently of the others, so you only need to download...VCC: Latest build, v2.1.30516.0: Automatic drop of latest buildVisual Studio DSite: Advanced Digital Board Game (Visual C++ 2008): An advanced digital board game made in visual c 2008.YUI Compressor Custom Tool for Visual Studio: YUI Compressor Custom Tool Full Version: Version 1.0 The following changes have been made: Merged classes to automatically sense if the target file is Javascript or CSS. Cleaned up setu...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryPHPExcelBlogEngine.NETRawrMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersDotNetZip LibraryCaliburn: An Application Framework for WPF and SilverlightSQL Server PowerShell Extensions

  Read the article

• Apache /server-status/ gives a 404 not found

  - by kapshure

  I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking. first, system info: monitored server CentOS 5.3 kernel 2.6.18-128.1.1.el5 Apache/2.2.3 "server-status" directive in httpd.conf (i've cross-compared this with another system that i did a successful parallel install of Munin on, correctly showing Apache stats, and the directive below is the same for both) ExtendedStatus On <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> ran lynx http://localhost/server-status got HTTP/1.1 404 taking a look at Apache access_log: 127.0.0.1 - - [13/Oct/2010:07:00:47 -0700] "GET /server-status HTTP/1.0" 404 11237 "-" "Lynx/2.8.5rel.1 libwww-FM/2.14 SSL-MM/1.4.1 OpenSSL/0.9.8e-fips-rhel5" mod_status is also loaded: % grep "mod_status" /etc/httpd/conf/httpd.conf LoadModule status_module modules/mod_status.so iptables is turned off also i did notice that the ownership status on httpd.conf on this system is root.root.. whereas the system that is displaying correctly is apache.www -- not certain that this matters?? its got to be permission issue, but i'm not certain where the permissions are messed up. any thoughts on why the test of server-status is giving me a 404?

  Read the article

• Apache crashes every 5min

  - by Simon

  I'm relatively new to server issues, having a site of mine that I started early in the year grow beyond my capabilities of managing it. I need help. I recently moved out of my shared hosting environment onto a dedicated virtual server from Mediatemple. Each week, I run a script that fetches data from my DB, fetches data from last.fm's API and then tweets information to Twitter. My server uses Virtuozzo and when the script runs, Apache crashes every 5min. I checked and saw that the 'kmemsize' parameter reaches its cap (its 13mb). I realise my problem. The MySQL process stays open for long while Apache needs to handle lots of incoming links (about 200 000 pageviews for that day according to my previous host's AWSTATS). Yes, I'm quite unexperienced in this, and I'm clearly killing the server with too many incoming links while it has to manage the updating of the DB. So that is the precedent: I want a few answers. 1) Why did my shared hosting environment not crash apache every 5min? It ran fine, the site only slowed a lot. Clearly, it must be the virtual container and the kmemsize limit? 2) Where do I go from here? Would a physical server (not a virtual container) encounter the same problems? I sent a support request to Mediatemple as well. I need all the help I can get.

  Read the article

• Terrible noises from subwoofer of ACER Aspire 6930 with Realtek sound chip

  - by OneWorld

  After approximately 5-15 min of listening to music my subwoofer begins to make terrible noises. He's just "coughing". That began after 6 months I had this computer. Now I found out, that I can temporarily fix this problem by "restarting" the audio stream of the application that plays music. For example reloading last.fm page (reloads the flash file). Another way to reset the audio playback is switching the speaker configuration shown below in the screenshot. According to many posts on the internet like http://www.tomshardware.co.uk/forum/52918-20-acer-aspire-6935g-speaker-problem ACER support isn't any help Exchanging hardware doesn't fix the problem Even the later models have this problem Turning off the volume of the subwoofer is not an option to me. I still have warranty (I bought an extension of one year). I already tried about 15 versions of the Realtek driver with no success. I am not sure but MAYBE the problem did not occur on the original windows vista that was shipped with this computer. However, I removed the original windows for good reasons (english). What do you suggest me? Did anyone fix this problem? Maybe by writing a script which resets the audio streams every 5 minutes? Shall I take the effort to deal with the acer support until they give me another model? (I won't have a computer than for a longer time, will spend money on telephone hotlines (1,30 EUR / min)......) Here are additional infos, if they are any help: Windows 7 64 Bit (Original was Windows Vista Home Premium 32 Bit) All specs Audio driver version:

  Read the article

• Anyone else experiencing high rates of linux server crashes today?

  - by Bron Gondwana

  Just today, Sat June 30th - starting soon after the start of the day GMT. We've had a handful of blades in different datacentres as managed by different teams all go dark - not responding to pings, screen blank. They're all running Debian Squeeze - with everything from stock kernel to custom 3.2.21 builds. Most are Dell M610 blades, but I've also just lost a Dell R510 and other departments have lost machines from other vendors too. There was also an older IBM x3550 which crashed and which I thought might be unrelated, but now I'm wondering. The one crash which I did get a screen dump from said: [3161000.864001] BUG: spinlock lockup on CPU#1, ntpd/3358 [3161000.864001] lock: ffff88083fc0d740, .magic: dead4ead, .owner: imapd/24737, .owner_cpu: 0 Unfortunately the blades all supposedly had kdump configured, but they died so hard that kdump didn't trigger - and they had console blanking turned on. I've disabled console blanking now, so fingers crossed I'll have more information after the next crash. Just want to know if it's a common thread or "just us". It's really odd that they're different units in different datacentres bought at different times and run by different admins (I run the FastMail.FM ones)... and now even different vendor hardware. Most of the machines which crashed had been up for weeks/months and were running 3.1 or 3.2 series kernels. The most recent crash was a machine which had only been up about 6 hours running 3.2.21.

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >