Search Results

Search found 2840 results on 114 pages for 'ports'.

Page 62/114 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • Dual-WAN router

    - by aix
    I am looking for a router that would fit the following requirements: Two WAN interfaces: the primary is PPPoE, the secondary will link to a GigE port on another router (a 100Mbps link will suffice); Two (ideally four) GigE LAN ports; No requirement for a firewall; No requirement for Wi-Fi; Inexpensive. The plan for the two WAN interfaces is as follows. All outbound traffic will go to the primary, with exceptions based on destination IP/subnet or possibly on src+dest IPs/subnets. Such exceptions should be routed to the secondary. It would be very nice if, should the primary go down, the secondary would automatically take over for all outbound traffic. I am reasonably sure that I can put something together based on dd-wrt. However, I'd like to hear from you what alternatives are out there (especially something easier to set up for my use case, even if it means paying more for the hardware.)

    Read the article

  • Recommending simple appliance for DansGuardian, iptables, snort inline

    - by SRobertJames
    I'm currently using a Linksys E2000 with dd-wrt. I'd like to add DansGuardian for Content Filtering and snort-inline for IPS; but those require a more powerful box (mainly, more storage). Can you recommend a good device to use? I'm open to both overwrite-the-firmware (like dd-wrt) and designed-to-be-customized boxes. Requirements: 1. 5+ Ethernet ports, pref. GigE 2. small form factor 3. No noise (office environment) 4. low power 5. Not sure about 802.11 wireless Budget < $400, pref. less.

    Read the article

  • Solution for storing sata drives outside of case

    - by Jeffrey Kevin Pry
    I have a system that has 8 sata disks in a software raid 5 array using mdadm. My issue is that I want to move the drives from inside of the computer case in order to cool more efficiently. I have looked all over the web and only seem to find enclosures that hide the drives connectors behind an estata port or some other internal raid controller. Basically what I want is an enclosure or equivalent that I can run independent sata cables to and either power as well, or have it have its own power supply. I have the sata ports on the motherboard available and don't want to limit io by using one port with a multiplier or the like. One final caveat, I am a college student on a budget and don't have a fortune to spend on such an enclosure. Thanks in advance for your help and advice.

    Read the article

  • PC won't boot / USB and PS2 keyboards don't work

    - by Truncheon
    My brother's PC has stopped working. He now cannot boot into windows, and he can't access BIOS by pressing the DEL key as no keyboards work. He has tried 4 different keyboards, one of which is PS/2. He tried the USB keyboards on all the USB ports. I don't know why the BIOS would show the message "Floppy disks fail (40)", as there is no floppy disk drive in the PC. He has upgraded from XP to Vista (yes that's right, upgraded keeping the XP drivers, eyes roll). A BSOD occurred in Vista while he was browsing files. What steps should be taken to troubleshoot the problem?

    Read the article

  • How do I fix Nginx config to work with multiple hosts of Unicorn?

    - by fred deAlmeida
    I have no problem instantiating multiple instances of unicorn on different unix sockets and ports. Works fine if I do url:port. My problem comes in correctly formatting nginx.conf to allow multipe upstream conditions. Whatever i do does not seem to work. One instance is fine works fine. Multiple gives me a ""upstream" directive is not allowed here error I am using the base nginx sample from the unicorn site. and doubling up the upstream area with differing terms. each is part of the http set. Any help would be amazing!

    Read the article

  • Finding a private (NAT) host's IP using historic destination data

    - by l0c0b0x
    The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

    Read the article

  • Display Resolution Getting Changed Automatically (sometimes) - Win7x64 - ASUS M3A78-EM

    - by kamleshrao
    Hi Guys, AMD PC Motherboard - ASUS M3A78-EM (installed VGA drivers from ASUS website - AMD_VGA_V863200_XPVistaWin7.zip) It has VGA and HDMI inbuilt ports (ATI Radeon HD 3200 Graphics 256MB) VGA is connected to my ViewSonic Monitor. HDMI is connected to LG LCD TV OS - Windows 7 x64 Ultimate Sometimes, when I reboot/start my PC, my ViewSonic display resolution changes and does not show the recommended value(1440x900) in Resolution Settings. The HDMI display works well always. But after multiple reboots/starts, the problem gets fixed automatically and I get back my recommended resolution on ViewSonic display. I am not making any changes to the existing drivers. It sometimes work well, and sometimes doesn't work. Can someone assist me resolving this permanently.

    Read the article

  • Slow LAN transfer from 3rd party computer

    - by Chris
    Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

    Read the article

  • Load balancing with Cisco router

    - by you8301083
    I have a Cisco router with two bonded T1's which are setup as a VPN to the main office. We need more bandwidth but can't get other connections (or it's too costly), so I would like to have a dsl connection installed. This DSL connection will run over a VPN to the same main office, but it won't be bonded with the T1's - so it won't act as a single connection. Since the three circuits won't act as a single connection (basically would be two connections 2 T1's + 1 DSL) we would have to split the network in half - but I don't want to do that. Instead, would it be possible to send all HTTP/HTTPS over the DSL connection but send all mission critical data (such as voice/active directory) over the T1's? I basically want to send specific ports over DSL and everything else over the T1's without separating half of the users traffic over the DSL and the rest over the T1's.

    Read the article

  • Cable management between multiple racks

    - by RippieUK
    I am in the planning phase of re-cabling our 5 racks in one of our offices and I would like to ask for some guidance on how you go, or would go about managing cables that goes between racks. In our situation we have 5 racks where the furthest to the right is our main patch panel for 300 floor ports. The rack next to it is our main comms rack where main switches and ISP routers are located. the other 3 racks next to the comms rack then all need to connect back to the main comms rack. I am not sure if a 48 port patch panel in each rack would be any good for this scenario? mainly because i am not sure this can be linked back to the main switch with only 1 cable. Would a 48 port switch in each rack be better as you can uplink those back to main switch? Or should we just run cables between racks back to the main switch? Hope someone can offer some guidiance. Thx

    Read the article

  • Self-hosted browser-based remote desktop script?

    - by rlsaj
    I need a self-hosted browser based remote desktop script that will connect me from any PC to my work PC. I need to either host this script within my own dedicated hosting or on my work PC. The PC that I need to remote into is always the one PC (Win7) and the IP never changes, and I have access to the Router/Firewall within. I have tried many remote desktop services and applications - LogMeIn, Team Viewer, (Ultra/Tight) VNC, GoToMyPC and iTeleport Connect and even Windows Remote Desktop - and the web services (or ports) are blocked at whatever free wi-fi/hotel/coffee shop I am at. Note that I will need to be able to access this from any PC, so I won't be able to install any applications (or use any portable software) - hence my thinking that it will need to be browser based on a standard (not blocked) port. If I can set up a web based remote desktop application - really a homebrew LogMeIn - then I should solve my problem. What is the best option here?

    Read the article

  • smallest footprint for Web Application server?

    - by edgardodelamanta
    There are times when you need to spare hardware resources (either to keep using legacy hardware, to play the embedded card, or just to be efficient because a large footprint is trashing CPU caches, leading to unacceptable levels of idle-states). In this spirit, some efforts have been made to make 'light' ports of Java or Mono (C# for Linux), and they range in the 80-50 MB (instead of the 100-200 MB). Add a Web server (Apache, IIS, etc.) to the scripting engine and you can happily dive into the GB (IIS + .Net) only to load the tool in memory. Anybody with more modest tools in the specs area?

    Read the article

  • Why is the network speed on my Mac Pro (early 2009) so slow?

    - by Rafael
    I have a really weird networking issue on my Mac Pro (Early 2009). I can’t get higher network speeds than about 2MBit/s. It doesn’t matter if this is over AirPort or one of the Ethernet ports. An iMac and a Mac mini in the same network with almost the same configuration get about 25-30 MBit/s. I’ve read a couple of things about this on the official Apple forums, but there is no helpful information. Anyone else with Mac Pro network speed issues and who knows how to solve them?

    Read the article

  • What is the maximum number of TCP connections I can have in Windows Server 2008?

    - by evilfred
    I would like to have as many connections (single connections from many different clients) as humanly possible in a server running on Windows Server 2008, in order to support a Comet-style application. The application is written in C#. The connections will not be chatty, they just need to be open (and stay open). Buying boatloads of memory and fast CPUs are not a problem. As far as I can tell, I will be limited to 65k simultaneous open connections per NIC - the maximum number of ports. Is this accurate? Or can I go beyond 65k connections / NIC somehow? It seems like there are server products for Linux at least that support hundreds of thousands of connections. How do they do this?

    Read the article

  • Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

    - by Victor Sergienko
    I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

    Read the article

  • Connecting a USB laptop to a RJ45 serial port

    - by Jon
    We are about to get our first managed switch at work (Procurve 2520G-24-PoE), and this lowly programmer gets to put on his admin hat and try to configure it. The switch has an RJ45 serial port for console access. My laptop has USB ports but no serial port. In fact, there isn't a single computer in the office with a serial port. I've seen USB-to-DB9 adapters, but I need to go from USB to RJ45 (serial). How would I go about accomplishing this? Do I need two adapters? Will USB-to-DB9 and then DB9-to-RJ45 work? Thanks in advance.

    Read the article

  • logitech unifying receiver

    - by Plastkort
    hi! I am having multiple logitech devices, and each and one of them seem to have theire own receiver, occupying USB ports.. I read upon Logitech unifying receiver, and it seem to connect multiple wireless devices from logitech, however I wonder if I just buy this one receiver, will I be able to connect my existing wireless devices, or will I be forced to buy new keyboard and mouse in order to use the unifying receiver? hope anyone here have the answer so I dont need to spend money on something I cannot use.. :) I got PC 1 Logitech Dinovo Edge keyboard Logitech MX Air mouse PC 2 Logitech Dinovo Keyboard Logitech VX mouse

    Read the article

  • infiniband network between 3 servers

    - by grumpf
    Let's say I have 3 different servers, each one with an infiniband card. Each card has 2 different ports. (I don't know about the model yet) Is it possible to create 3 different networks and to allow the 3 servers to communicate with each other without any problems? (and any spof). I guess I just have to setup the /etc/hosts correctly. I really don't know about infiniband, so please help me :) Thanks in advance. EDIT: Point is to NOT USE a switch!

    Read the article

  • Intel SASWT4I SAS/SATA Controller Question

    - by Joe Hopfgartner
    Hey there! I want to assemble a cheap storage sytem based on the Norco RPC-4020 Case. When searching for controllers I found this one: Intel® RAID Controller SASWT4I This is a quote form the Spec Sheet: Scalability. Supports up to 122 physical devices in SAS mode which is ideal for employing JBODs (Just a Bunch Of Disks) or up to 14 devices in RAID 0, 1, 1E/10E mode through direct connect device attachment or through expander backplane support. Does that mean I can attatch 14 SATA drives directly to the controller using SFF-8087 - 4x SATA breakout cables? That would be nice because then I can choose a mainboard that has 6 Onboard SATA and i can connect all 20 bays while only spending 155$ on the controller and like another 100$ on cables. Would that work? And why is it 14 and not 16 when there are 4 Ports? I am really confused about all the breakout/fanout/(edge-)expanding/multiplying/channel stuff...

    Read the article

  • TCP connection between PCs in home wi-fi network

    - by Nordvind
    I want to establish a connection between 2 PCs. Point is to practice in writing client-server applications and similar stuff. I've heard around, that I can access another PC in network by address like "Router IP:port number". Am I right or i got it wrong? So how do I configure router to let connections to certain ports? And what would address look like, if I'm, say, connecting to 80 port on my home server? P.S. Will be grateful for links to some tutorials on this matter, if any.

    Read the article

  • Cannot start Xampp on server with IIS

    - by Vafello
    I am running a Windows Server 2003 with IIS and I am trying to install XAMPP in order to be able to run php and mysql based pages. I tried to install php on IIS, but it is too complicated and time consuming for me. I am able to run asp on localhost/ and I would like to run php websites on different port, say localhost:81/. After installing xampp and changing the port in httpd.conf file to 81 I try to turn on apache, but it turns off after about 5 seconds. Mysql works fine. It seems that there is a port clash, but I do not know how to change the ports and turn the apache permanently. Any advice appreciated. (I know it is more a server fault question, however I posted it there as well and did not get any reply, so I decided to try here)

    Read the article

  • Set up a root server using Ubuntu and Virtualization

    - by Daniel Völkerts
    Hello, I'd like to setup a fresh root server and install a linux based virtualization on it. My thoughts are on: Intel VTs Hardware Ubuntu 9.10 KVM based virt. The access to the root server will only be SSH for Administration. Has anybody done this before, what was your glues discovered in the daily use? My requirements are: very secure, so the root server only has ssh to the dom-0 and minimalistic ports for the guest (e.g. http/s). good monitoring of host/guest (my idea is to using zabbix for it) easy and fast administration (how are the command line tools working for you? cryptiv? high learning curve?) I'm pleased to learn from your suggestions. Regards, Daniel Völkerts

    Read the article

  • Virtual Hosting in RHEL5

    - by Kumar P
    We having RHEL5 linux server with few windows xp clients. We providing web development in php. Now my developers as for common local php server for keep their projects in same place. Currently proxy server and samba sharing are running in RHEL5 server. I installed httpd,php,MySQL in server. And i would like to configure virtual hosting too for LAN. What i want do for it ? In server we have 2 Ethernet ports, 1 for local connection and another one for Internet. Internet provided by ADSL provider. (192.168.0.0 series for ADSL modem connection and 10.1.1.0 for LAN connection. If i want to use virtual hosting , am i want to setup local DNS server ? My requirements are, setup php with mySQL server for Local clients with multiple hosting , without disturbing proxy and samba. Help me to solve it.

    Read the article

  • Want 2 external monitors with a 13' MacBook - is this possible?

    - by kevinburke
    I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

    Read the article

  • Design Question

    - by dturner71
    Can I have two independent Connection servers attached to the same vCenter server? Here's my scenario. I'm setting up View 4 to provide desktops to two seperate Windows domains that are on different IP subnets seperated by a firewall. One cluster of physical servers, one vCenter server, linked clones. As I understand it View Connection server has to be a member of a Windows domain in order for quickprep to work. So the way to provide desktops to both Windows domains is to have a Connection server in each one right? Then open ports in the firewall so the Connection server from the other subnet can communicate with vCenter. Any reason why this won't work? Or is there a better way to accomplish it?

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >