Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 62/750 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Trying to setup virtual hosts on unix PHP on nginx

  - by user1634653

  I have tried to install php5-fpm and Nginx on Ubuntu machine, but I got a problem. When I have only one virtual host on a unix port it is all fine but when I try to add another virtual host Nginx goes to default web page "Welcome to Nginx!" but when I run it on a tcp port example port 9000 it work fine with multisites. It is a fresh install of ubuntu 11.10, Nginx 1.2.3 with php5-fpm installed. It also has extra php installs such as php-apc. I can only give the links to the virtual hosts because I am doing it from a mobile phone. Here are the links for the two virtual hosts I am using: http://ic0nic.co.uk/ic0nic.txt, http://ic0nic.co.uk/sourproxy.txt also I want to use unix port because I find it a whole lot faster. Edit: Here are the nginx configs server { server_name ic0nic.co.uk www.ic0nic.co.uk; root /var/www/ic0nic.co.uk; listen 8080; index index.html index.htm index.php; include conf.d/drop; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location ~ \.php$ { fastcgi_buffers 8 256k; fastcgi_buffer_size 128k; fastcgi_intercept_errors on; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass unix:/dev/shm/php-fpm-www.sock; root /var/www/ic0nic.co.uk; } } server { server_name sourproxy.co.uk www.sourproxy.co.uk; root /var/www/sourproxy.co.uk/; listen 8080; index index.html index.htm index.php; include conf.d/drop; location / { try_files $uri $uri/ /index.php?q=$uri&$args; } location ~ \.php$ { fastcgi_buffers 8 256k; fastcgi_buffer_size 128k; fastcgi_intercept_errors on; include fastcgi_params; fastcgi_param SCRIPT_FILENAME /var/www/sourproxy.co.uk$fastcgi_script_name; fastcgi_pass unix:/dev/shm/php-fpm-www.sock; } }

  Read the article

• setup vim so that it searches the python path

  - by Dave

  I'm using vim as my primary editor with python files; I'd like to be able to easily open python files. As an example: I'm looking at a particular module A.py, in it I see the line import funkyModule, I want to edit that module so I just type in the command :pyed funkyModule and the pyed vim-command automatically finds the file funkyModule.py (or funkyModule/__init__.py) where ever it occurs on the python path. This capability is modeled on the capabilities if the ipython shell, where In [#]: edit funkyModule does what I've just described.

  Read the article

• How to setup Proxy Cache with Nginx and Passenger

  - by tiny

  I use Nginx and Passenger for my rails application. I want to use proxy cache to cache my pages. However, every request go direct to my rails application. I don't know what wrong with my configuration. Below is my configuration: user www-data; worker_processes 1; events { worker_connections 1024; } http { passenger_root /usr/lib/ruby/gems/1.8/gems/passenger-2.2.15; passenger_ruby /usr/bin/ruby1.8; passenger_max_pool_size 6; passenger_max_instances_per_app 1; passenger_pool_idle_time 0; rails_spawn_method conservative; include mime.types; default_type application/octet-stream; server_names_hash_bucket_size 512; sendfile on; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_http_version 1.0; gzip_vary on; gzip_comp_level 6; gzip_proxied any; gzip_types text/plain text/css text/javascript application/javascript application/json application/x-javascript text/xml application/xml application/xml+rss; proxy_cache_path /var/www/cache/webapp levels=1:2 keys_zone=webapp:8m max_size=1000m inactive=600m; include vhosts/*.conf; include /opt/nginx/conf/sites-enabled/*; root /var/www; } server { listen 127.0.0.1:3008; server_name localhost; root /var/www/yoolk_web_app/public; # <--- be sure to point to 'public'! passenger_enabled on; rails_env development; passenger_use_global_queue on; } server { listen 80; server_name webpage.dev; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; error_page 503 http://$host/maintenance.html; location ~* (css|js|png|jpe?g|gif|ico)$ { root /var/www/web_app/public; expires max; } location / { proxy_pass http://127.0.0.1:3008/; proxy_cache webapp; proxy_cache_valid 200 10m; } #More Location }

  Read the article

• SQL Distributed Reporting Services Setup

  - by Praesagus

  I am setting up two servers; one iis 7 and one sql 2008. I need to use reporting services. What is the best way to set up reporting services so that my iis box can serve the reports. I'm sure this is not an unusual configuration, but I'm having a lot of trouble finding an answer to this - probably because I am using the wrong terminology. Also does this configuration require two sql licenses (one for each server)? This sound like a lengthy explanation so links or even the correct terminology for this so I can find the answers myself would be much appreciated. Thanks

  Read the article

• How to setup FTP Server on Linux

  - by Webnet

  I need to use FTP for a wordpress installation on a server and I'm not sure if it even has FTP on it. I'm trying to install themes and things where wordpress requires the FTP info. How can I set this up? There doesn't seem to be much on Google or I'm just not looking in the right place

  Read the article

• Setup Webmail server unable to receive mails

  - by user26516

  I installed centos and configured email server and if I send email goes perfectly but if i reply from email that email i am getting this kind of error. Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the server for the recipient domain example.com by mx00.1and1.com. [74.208.5.3]. I have bought domain in 1and1.com and i successful parked the domain. But i have doubt shall i need to add anything in MX record for other mail server. Please anyone help.

  Read the article

• RAID setup for maximizing data retention and read speed

  - by cat pants

  My goals are simple: maximize data retention safety, and maximize read speeds. My first instinct is to do a a three drive software RAID 1. I have only used fakeraid RAID 1 in the past and it was terrible (would have led to data loss actually if it weren't for backups) Would you say software raid 1 or a cheap actual hardware raid card? OS will be linux. Could I start with a two drive raid 1 and add a third drive on the fly? Can I hot swap? Can I pull one of the drives and throw it into a new machine and be able to read all the data? I do not want a situation where I have a raid card fail and have to try and find the same chipset in order to read my data (which i am assuming can happen) Please clarify any points on which it sounds like I have no idea what I am talking about, as I am admittedly inexperienced here. (My hardest lesson was fakeraid lol) Thanks!

  Read the article

• How to setup apache multi-site with multi-domain on ec2

  - by Esh

  Say I have two document roots domain1/ and domain2/ I know how to access those two roots from my own computer if they are hosted on the same computer. My question is that if I want to do the same thing on my ec2 server, how should I configure my elastic ips to those two roots? I know by default the elastic ip will only associate to the root with the name localhost(127.0.0.1). Anyone could give me a detailed answer? An example would help, thanks!

  Read the article

• Cisco 1760 T1 Setup

  - by Joseph

  My 1760 has a WIC1-T1 card in Slot 0 and the slot 0 "OK" light is lit. When the router boots it shows that it sees the T1 card. I would like to configure my T1. I received the following details from my ISP: * Removed IP's IP Version: IPv4 Router Interface: edge1.mia1 -- t1-2/1/0:2:13 -- Switch Port: Vlan: WAN Network: 4.59.?.?/30 Level3 Side: 4.59.?.? Customer Side: 4.59.?.? Cust. LAN IPs: 4.59.?.?/27 The problem is that it is not listed under interfaces. I am a noob with IOS, please let me know if you need more details. Thanks.

  Read the article

• Strange boot problems on 6 month old setup

  - by Balefire

  I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

  Read the article

• Secure NAT setup with iptables

  - by TheBigB

  I have Debian running device that needs to act as an internet-gateway. On top of that I want to provide a firewall that not only blocks inbound traffic, but also outbound traffic. And I figured iptables should be able to do the job. The problem: I've configured NAT properly (I think?), but once I set the default policy to DROP and add rules to for instance allow HTTP traffic from inside the LAN, HTTP is not going through. So basically my rules don't seem to work. Below is the initialization script that I use for iptables. The device has two NICs, respectively eth0 (the WAN interface) and eth1 (the LAN interface). echo 1 > /proc/sys/net/ipv4/ip_forward # Flush tables iptables -F iptables -t nat -F # Set policies iptables -P INPUT DROP iptables -P OUTPUT DROP # NAT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT # Allow outbound HTTP from LAN? iptables -A FORWARD -i eth1 -o eth0 -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -p tcp --dport 80 -j ACCEPT Can anyone shed some light on this?

  Read the article

• How to setup THIS IPv6 network

  - by Revolter

  I have a network mapped like this : just to experiment IPv6 connectivity, i want to configure my LAN network using IPv6, can some one explain me how to convert the connection between the Desktop and the Laptop to IPv6 without loosing the internet connection ? I don't want to access IPv6 internet, I need to keep my v4. So the end result will be something like an full-IPv6 Laptop accesing IPv4 internet over a some-how-configured Desktop that acting as a NAT.

  Read the article

• Three monitor setup not working on Server 2012

  - by maxp

  Using an ATI firepro 4800 card, with three monitors connected (1 dvi, 2 displayport) on Server 2008 R2 worked fine. Ive now moved to a new machine, although identical spec, with a fresh Server 2012 install, and cannot get a three display output - only two. When I try to extend the display on to the third monitor, I get the message "The display settings could not be saved. Please try a different combination of display settings" The machine is a Dell Precision T1600. Any help appreciated.

  Read the article

• Setup mail server on VPS?

  - by user41010

  This is a n00b question, sorry. I have a site running on a VPS, now I want to be able to receive mails at [email protected]. How do I need to set up the server? And how should I set up the mail client on my PC to receive those mails? The server is running CentOS/RHEL. I'll really appreciate if someone shed some light on the steps that need to be taken. It will be really helpful. Thanks in advance!

  Read the article

• Setup IPv4 local on IPv6 VPS

  - by A.D.

  I have a dedicated server running multiple IPv6 only OpenVZ containers. I want them to be able to communicate with the IPv4 internet, but I realized that isn't going to be possible with IPv6 only. So they need to have an IPv4 address as well, not sure if a local address will work for it, but pretty sure it should. I added 169.254.1.100 in the container .conf file, but when I try to start it, I get this : Adding IP address(es): (the IPv6 address) 169.254.1.100 arpsend: 169.254.1.100 is detected on another computer : 00:04:9b:f2:b0:00 vps-net_add WARNING: arpsend -c 1 -w 1 -D -e 169.254.1.100 eth0 FAILED I did a lot of research, and searched serverfault before posting this, but found nothing relating to this.

  Read the article

• How to setup a daily report of the top e-mail senders in Exchange 2010

  - by Belmin

  We have had issues with compromised Exchange accounts sending a large amount of unsolicited e-mails out. We have mitigated this by using a cloud e-mail gateway that does a better job in detecting these outgoing messages as to not hurt our e-mail reputation. However, we would still like to detect any abnormal e-mail activities. One idea is a report of the Exchange accounts with the most outgoing message. Any idea on how to do this? Or a similar stat that may be indicative of an account being compromised?

  Read the article

• trying to setup multiple primary partitions on ubuntu linux [migrated]

  - by JohnMerlino

  I currently have ubuntu desktop installed on a harddrive. I want to partition the harddrive so that I can reserve 30 gigs for ubuntu server and 30 gigs for ubuntu desktop. The drive has 300 gigs available. Right now I am booting from dvd drive and installing ubuntu server. I selected "Guided partitioning" and created a 30 gig primary partition of Ext4 journaling filesystem, set "yes, format it" for format partition and set bootable flag to on. I intend to use this 30 gig partition to hold ubuntu server and allow me to boot from it. Now I have two other partitions. They are both set to "logical", one is currently using 285.8 gigs and is using ext4 (when I try to set bootable flag to true, it gives a warning "You are trying to set the bootable flag on a logical partition. The bootable flag is only useful on the primary partitions"). More alarming it says "No existing file system was detected in this partition". Actually, Im thinking that this is the parittion that is supposed to be holding my current Ubuntu Desktop. And of course I want this to be bootable and be a primary partition, so I could dual boot from this and the server partition. Now the third partition is also set to logical and it is being used as swap area. My question is regarding that second partition. Its supposed to be a primary partition thats holding my existing ubuntu desktop edition. How do I switch it to primary and to make sure that its pointing to my existing desktop installation?

  Read the article

• How to setup an Openvpn server with two gateways to internet

  - by fourat

  I have an openvpn server behind two wan interfaces: eth1 and eth2 where eth1 is the default gw and eth2 is where openvpn binds to. The problems my ovpn server is replying back to ovpn client via the default gw (through eth1) and the tcp negociation is lost before establishing any tunnel. Here's what's happening: wan client -----> eth2 ----> openvpn -----> eth1 ----> lost and not delivered back to client Is there a way to tell ovpn to stick on eth2 and consider it for all traffic ?

  Read the article

• how to get a decent emacs setup on linux

  - by Hersheezy

  I am currently interested in switching from vim to emacs. One of the more compelling reasons for this is the smooth integration with a unix environment. The most experienced emacs users I have seen have a bash prompt at the bottom of their window, with stdout going to a buffer right above it. They then interact with the output of programs such as grep in interesting ways. I am on Ubuntu 10.04 and the default emacs environment does not seem to do much for me in the way of integration. For example, in the M-x shell mode, output from basic commands like ls produce lots of strange characters and hitting the up arrow does not go to previous commands. Any recommendations on a good direction to go in?

  Read the article

• Using Plesk to setup MySQL

  - by chris

  Having trouble getting my mysql up and running on a new virtual server. The host gave me Plesk and I think MySQL is installed but I can't seem to access it. I keep getting this: mysql -u admin -p Enter password: ERROR 1045 (28000): Access denied for user 'admin'@'localhost' (using password: YES) How do I make sure its running properly? How do I reset the root password? (I have root access to the server)

  Read the article

• Google Sites (via Apps) setup questions

  - by Dave

  I thought that it would be a piece of cake to set up a Google site via Google Apps, but perhaps my previous (limited) experience with web development has given me unrealistic expectations. I have actually had a really tough time finding help with the exact question that I have, which is: How do I change the home page contents??? You see, I'm used to having hosting with someone like GoDaddy, where I can just ftp in and drop my HTML files in the www folder. From research I have found that this is simply not possible with any flavor of Google Sites. That's fine, I can live with it. So let's say I have www.mydomain.com. When I hit that URL, it redirects me to a very long URL (unfortunately) like https://sites.google.com/a/mydomain.com/sites/system/app/pages/meta/domainWelcome, which just says: Google Apps Welcome to mydomain.com If you are the domain administrator get started creating your home page with Google Sites Great! I want to do that. So I click on the "If you are the..." link and end up at a screen where I can choose a template, a name, and some visibility options. If I click on My Sites, there isn't a "default" site, i.e. the one that www.mydomain.com displays. I figured that maybe I just have to create a site first, so I went ahead and did that. My first test was to create a site that was publicly accessible. I thought that maybe if I did that, the Google would decide that this must be my home page since it's the only one. But it doesn't, and I still get the "Welcome to" page. Under "More Actions", I didn't see anything interesting except for "Manage site". I went in there and had a peek around, and didn't see anything about using this as the default home page. Am I looking for something that just doesn't exist? I can't believe there isn't a way to modify the "domain welcome to" page...

  Read the article

• how to setup irc domain on another server?

  - by CareOn

  like i have the site on one server but irc (the site uses) should be hosted on another hosting provider. i have domain set up for the site. should get another one for the irc hosting and do cname to it? what should i do?

  Read the article

• Setup Apache with IPv6

  - by mrz

  I have two virtual machine on my computer. I have Apache installed on one of them (would be referred to as "server" after this), and I have set the Apache to listen to an IPv6. And when I enter the IPv6 into web browser on the "server" I see my index.html file. so far so good ... I want to be able to open a web browser on the other virtual machine("client") and see the index.html. But, when I try entering the IPv6 of the "server" in a web browser on the "client" I get an Unable to establish a connection to the server error. I can ping6 "client" from "server" and vice verse. There is only one thing to mention. ifconfig of the "server" shows 3 different IPv6 which two of them are scoped Global and there is one Link scope IPv6. On the "client" there is only one Link scope IPv6 though. I only can ping the Link IPv6s. Pinging other IPv6s would result connect:Network is unreachable. And if I set Apache to listen to Link IPv6, The rcapache2 start will fail the job. Any thoughts on what I am probably missing/doing wrong?

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >