Search Results

Search found 2556 results on 103 pages for 'sleep deprivation ninja'.

Page 62/103 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• How do I add more than one command to /etc/rc.local?

  - by Andreas

  I want to add two power saving commands to /etc/rc.local file. This to dissable bluetooth: rfkill block bluetooth And this to reduce screen brightness: echo 3024 > /sys/class/backlight/intel_backlight/brightness Separately added to /etc/rc.local they work but not both of them together like this: #/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 3024 > /sys/class/backlight/intel_backlight/brightness rfkill block bluetooth exit 0 How do I add the two commands to get them properly executed at start-up? Update It turned out to be a timing issue. I fixed it by delaying the execution of the first command thus: (sleep 5; echo 3021 > /sys/class/backlight/intel_backlight/brightness)&

  Read the article

• New Workstation &ndash; Lenovo W530 Core i7 32GB 256GB SSD Win8Pro

  - by Brian Lanham

  So I pretty-much have my new machine up and running full-time. I am still going to have to hit my old workstation for some things but am more-or-less working on my new machine.  It’s really fast. And Bret was right, I’m not so far using all the RAM. 16 would have been enough but as @CodeMonkeyJava “go big or go home”. Windows 8 is…interesting.  So far I still seem to do most of my work in the “Desktop”.  However, I like the Store concept and I like the Metro UX.  Live tiles are also nice.  I really like how I can switch between Desktop and Metro easily.  Overall I think Microsoft has done a great job of combining the needed experience for touch and mouse. My overall Windows 8 rating is 5.9 because of the video card. Otherwise I’m hitting 7.8.  The system boots from cold in about 11 seconds and performs complete shutdown in 4.7 seconds.  It wakes from sleep in less than 1 second. VS 2012 starts and restarts almost instantly.  In fact, I find myself staring at the start page without realizing it.  Build time doesn’t seem to be significantly increased but it is faster. I seem to already be reinvigorated for work with this new machine. I’m looking forward to the performance.

  Read the article

• How to avoid the GameManager god object?

  - by lorancou

  I just read an answer to a question about structuring game code. It made me wonder about the ubiquitous GameManager class, and how it often becomes an issue in a production environment. Let me describe this. First, there's prototyping. Nobody cares about writing great code, we just try to get something running to see if the gameplay adds up. Then there's a greenlight, and in an effort to clean things up, somebody writes a GameManager. Probably to hold a bunch of GameStates, maybe to store a few GameObjects, nothing big, really. A cute, little, manager. In the peaceful realm of pre-production, the game is shaping up nicely. Coders have proper nights of sleep and plenty of ideas to architecture the thing with Great Design Patterns. Then production starts and soon, of course, there is crunch time. Balanced diet is long gone, the bug tracker is cracking with issues, people are stressed and the game has to be released yesterday. At that point, usually, the GameManager is a real big mess (to stay polite). The reason for that is simple. After all, when writing a game, well... all the source code is actually here to manage the game. It's easy to just add this little extra feature or bugfix in the GameManager, where everything else is already stored anyway. When time becomes an issue, no way to write a separate class, or to split this giant manager into sub-managers. Of course this is a classical anti-pattern: the god object. It's a bad thing, a pain to merge, a pain to maintain, a pain to understand, a pain to transform. What would you suggest to prevent this from happening?

  Read the article

• How can I configure the touchpad and keyboard settings on a Dell Inspiron 5110?

  - by Robik

  I am using ubuntu 11.10. I want the following 3 things: I have dell inspiron 5110 laptop. There is button at the top right corner of laptop which can be used for turning the screen off. It works in windows but it does not work in ubuntu 11.10. Even in the manual of the laptop, it the button is supported only in windows. Is there a way to activate it in ubuntu 11.10? Some of the keys like: "break" etc. are missing. Can I use other keys (or combinations of other keys) to function as those missing keys? In the program, "mouse and touchpad", there is no tab for touchpad. I want to enable vertical and horizontal scrolling. How do I do that? The command: xinput list shows Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys Please help!!

  Read the article

• How do you make a precise countdown timer using clock_gettime? [migrated]

  - by Joshun

  Could somebody please explain how to make a countdown timer using clock_gettime, under Linux. I know you can use the clock() function to get cpu time, and multiply it by CLOCKS_PER_SEC to get actual time, but I'm told the clock() function is not well suited for this. So far I have attempted this (a billion is to pause for one second) #include <stdio.h> #include <time.h> #define BILLION 1000000000 int main() { struct timespec rawtime; clock_gettime(CLOCK_MONOTONIC_RAW, &rawtime); unsigned long int current = ( rawtime.tv_sec + rawtime.tv_nsec ); unsigned long int end = (( rawtime.tv_sec + rawtime.tv_nsec ) + BILLION ); while ( current < end ) { clock_gettime(CLOCK_MONOTONIC_RAW, &rawtime); current = ( rawtime.tv_sec + rawtime.tv_nsec ); } return 0; } I know this wouldn't be very useful on its own, but once I've found out how to time correctly I can use this in my projects. I know that sleep() can be used for this purpose, but I want to code the timer myself so that I can better integrate it in my projects - such as the possibility of it returning the time left, as opposed to pausing the whole program.

  Read the article

• Extended display - nightmare

  - by user206343

  I have been struggling for quite a while, and I hope one of you can shed some lights on my issue. I am using Xubuntu 13.10 (Ubuntu 12.04LTS behaves the same way, higher version wouldn't install, LinuxMint didn't install, Fedora didn't install). I am trying to set extend display for two dell monitors 1900x1200. It works great when in mirror mode, but I just cannot extend the display. Either one monitor goes to sleep and the other is unresponsive, or both work but are unusable. This is a link to the picture of my monitors in mirror mode This is link showing what happens after I try to extend the desktop I get the same results if I use aRandr or the built in configuration utility. I have an ATI Radeon X300 card. I cannot use proprietary Catalyst drivers (I would have to use the legacy ones, which would force me into using much older version of the OS). Extension is possible with Windows. I am hoping someone can come up with tweaks that would allow me to run an extended desktop. I truly love Xubuntu (and Ubuntu, unfortunately, Unity is a bit too heavy for my old PC, and I have to run in 2D mode, so 12.04 is as high as I can go). I have tried everything I could find online, but nothing worked thus far. I believe some configuration or something I am missing might work. Please, if you have any idea, do not hesitate. Thanks guys.

  Read the article

• Gnome-shell partially freezes

  - by user568021

  My specs: Ubuntu 12.04.1 LTS, Gnome3, Dell Studio laptop This is not happening all the time, but only sometimes .. totally randomly. When I'm in the middle of some work something totally weird happens. Keyboard suddenly stops working. I can't type, no matter which key I press nothing happens. I can't press Alt+Tab, I can't press Alt+F4, Alt+F2... nothing. Activities button is dead. Also right click does not work...and something even more annoying. I can click on the 'menu' in the top right corner(the menu pops up), but clicking on 'power-off' or 'suspend' option doesn't do anything. The only little thing I can do is: Close the lid of my laptop so it goes to sleep. Than wake it up again. And than it's ok. Everything works. So I guess restarting (or refreshing) gnome-shell fixes the problem. Sorry if the title of this question is odd... I don't know how to properly describe this.

  Read the article

• a c++ program for task scheduling [closed]

  - by scheduling

  This is the code which I made but I am not able to correct the mistake in the code. Please correct the mistake in my code. #include<unistd.h> #include<stdio.h> #include<stdlib.h> #include<time.h> #include<string.h> int main() { char *timetoken; char currtime[7]; char schedtime[7]; int i; struct tm *localtimeptr; strcpy(schedtime,"15:25:00"); while(6!=9) { time_t lt; sleep(1); lt = time(NULL); localtimeptr = localtime(<); timetoken=strtok(asctime(localtimeptr)," "); for(i=1;i<5;i++) timetoken=strtok('\0'," "); if(i==3) { strcpy(currtime,timetoken); } } printf("The current time is: %s\n",currtime); printf("We are waiting for: %s\n",schedtime); if(!strcmp(currtime,schedtime)) { printf("Time to do stuff \n"); system("C:\PROJECT X"); } getch(); return 0; }

  Read the article

• a c++ code for scheduling tasks [closed]

  - by scheduling

  This code has no errors but then when i execute it, there is no output and the program automatically shuts down saying the program has stopped working. #include<unistd.h> #include<stdio.h> #include<stdlib.h> #include<time.h> #include<string.h> int main() { char *timetoken; char currtime[7]; char schedtime[7]; int i; struct tm *localtimeptr; strcpy(schedtime,"15:25:00"); while(6!=9) { time_t lt; sleep(1); lt = time(NULL); localtimeptr = localtime(lt); timetoken=strtok(asctime(localtimeptr)," "); for(i=1;i<5;i++) timetoken=strtok('\0'," "); if(i==3) { strcpy(currtime,timetoken); } } printf("The current time is: %s\n",currtime); printf("We are waiting for: %s\n",schedtime); if(!strcmp(currtime,schedtime)) { printf("Time to do stuff \n"); system("C:\PROJECT X"); } getch(); return 0; }

  Read the article

• Can't turn off display - 13.10 / iMac

  - by user209883

  I can find no way to completely turn off the display on a late 2013 iMac running 13.10 (Saucy). In the power management settings, I configured the display to "turn off" after one minute to see what would happen. The dimness goes all the way down and everything disappears, BUT the LED backlight remains on. When I try the "xset dpms force off" command, absolutely nothing happens--the command is accepted (no error or warning), but nothing changes. I then wiped everything clean and installed 13.04 (Raring). Both methods (dpms and waiting for sleep) work perfectly there, so something has changed in this new version. The problem can be replicated simply by booting from a bootable USB stick. So, I also gave version 14.04 (Trusty) a try in this manner and it has the exact same issues as 13.10. P.S. I would gladly use 13.04, but the catch there is that I can not get the network card to function. I have spent a week now reading everything i can find on both of these matters with no luck at all. Thank you in advance for any advice.

  Read the article

• ???????????/??????????????????|WebLogic Channel|??????

  - by ???02

  ?WebLogic Server???????????????????――???????WebLogic Server???????????????1???????????????????????????????????·????????????????????2011?11????????Oracle DAB & Developers Days 2011??????????????????????????WebLogic Server???????????????????????????????????????????????/?????????????????????????(???)????????????3??????????????????――??????????????????2????????·????????3??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????　???????????????????????????????????????????8?????????????????5???????3??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????　??????????300~3,500?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????·????????????????????????????????????????????????????¦???????????·??????????――?????·??????·???????????WebLogic?????　???????????????300??????????????????????????????????????????????????300???????????????????????????????????????????????????????????????????????????????(??????500???)???????????????????????????????????????????????????????????????????·??????????????????????????????????????¦????????????WebLogic Server - ???????·???????????4???????????????????????――????????????　????????????????????????????????????????????????JDBC???????????????????JDBC??????????????????????JDBC?????????????????????????????????????????????????????????　??????????????????????????????????300????????500????????0????????100????????????????????????????????????????????????????????0???????????????????????????????????????????????????????????　?????????????????????????????????????????????????????????JDBC????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????·?????????????????????????????¦?????Pick-Up???????WebLogic Server JDBC???·???????(10.3.4)　?????????????????????????????????????????????????????????????????????????????　??????????????????????????????????????????300?????????????????100???????????????????????????????????????????????????????????????????????????0???????????????????????????????????????????????????????????????????????????????????????????????　????1????1????????????????????????????????????(???????????????)???????????????????????????????????????????????????????????????????　???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????　???????????????????JDBC??????????????????????????????????JDBC???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????·????????????????????????????????????????????????????????????????MBean???????WebLogic Server????????　?????????????????????????????MBean????????????　??????????????MBean??????????????MBean???????????????????PendingUserRequestCount)??????????????????????·?????(ExecuteThreadIdleCount)????·??????????????????????·?????(StandbyThreadCount)?????????????????????·?????????????????(ExecuteThreadTotalCount)??????????????????????????????????????????????????????=????????-??????·??????-?????·????? ?　????????????MBean??????????????MBean???????????????(ActiveConnectionsCurrentCount)?????????????????????????????????????(ActiveConnectionsHighCount)????????????????????????????????????????????????????????????(WaitingForConnectionCurrentCount)?????????????????????????????(WaitingForConnectionHighCount)?????????????????????????????????????????????(?)(WaitSecondsHighCount)????????????????????????????????????　????????????????????????WebLogic Server????????????????????????　???????MBean????????WebLogic Server????????????????????WebLogic Scripting Tool(WLST)?????????????????????????????????????WLST????????????connect('weblogic','welcome1','t3://localhost:7001')import timeimport tracebackserverRuntime()print "Day,Time,State,CurrCapacity,ActiveConnectionsCurrentCount,WaitingForConnectionCurrentCount"while(true): try: oJDBCDataSourceRuntime = getMBean('JDBCServiceRuntime/<????>/JDBCDataSourceRuntimeMBeans/<???????>') oState = oJDBCDataSourceRuntime.getState() oCurrCapacity = oJDBCDataSourceRuntime.getCurrCapacity() oActiveConnectionsCurrentCount = oJDBCDataSourceRuntime.getActiveConnectionsCurrentCount() oWaitingForConnectionCurrentCount = oJDBCDataSourceRuntime.getWaitingForConnectionCurrentCount() print time.strftime('%Y-%m-%d,%H:%M:%S') + "," + str(oState) + "," + str(oCurrCapacity) + "," + str(oActiveConnectionsCurrentCount) + "," + str(oWaitingForConnectionCurrentCount) time.sleep(1) except: print "<<<error>>>" traceback.print_exc() disconnect() break　?????????test.py??????/????????????????$ java weblogic.WLST test.py...?...Day,Time,State,CurrCapacity,ActiveConnectionsCurrentCount,WaitingForConnectionCurrentCount2011-10-31,22:39:01,Running,10,0,02011-10-31,22:39:02,Running,10,0,02011-10-31,22:39:03,Running,12,9,02011-10-31,22:39:04,Running,22,18,02011-10-31,22:39:05,Running,29,15,02011-10-31,22:39:06,Running,29,14,02011-10-31,22:39:07,Running,16,15,02011-10-31,22:39:08,Running,19,15,02011-10-31,22:39:09,Running,19,15,02011-10-31,22:39:10,Running,19,14,02011-10-31,22:39:11,Running,19,15,02011-10-31,22:39:12,Running,19,14,02011-10-31,22:39:13,Running,19,0,0　WLST??????WebLogic Channel?????????·???????! ?WebLogic Scripting Tool????WebLogic Server???/?????????????????????????????????????¦????????·???????! ?WebLogic Scripting Tool????WebLogic Server???/???????¦Oracle DAB & Developers Days 2011????????????????????WebLogic Server??????????????

  Read the article

• Management and Monitoring Tools for Windows Azure

  - by BuckWoody

  With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

  Read the article

• Management and Monitoring Tools for Windows Azure

  - by BuckWoody

  With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

  Read the article

• Configuring Expert Search in Communicator 14 and SharePoint 2010

  Communicator 14 provides functionality to be able to search for contacts not just by name, but by skill.  For example a customer service agent at an airline can search for other agents with Travel Advisory experience by typing the search criteria into the Communicator search box and performing a search by keyword.  The search results will return users who have specified that skill in their profile on their SharePoint My Site.  This is actually pretty easy to configure, Ill show you how. Create Search and People Search Results Pages in SharePoint Communicator 14 Expert Search works by using the SharePoint 2010 Search Service to search SharePoint for user profiles with matching keywords.  This requires that you have an Enterprise Search site in your site collection which includes the search service and also the People Results pages.  The easiest way to do this is to create a Search Center site in your site collection. Note: I get an error when trying to create an Enterprise Search site in a Team Site in the SharePoint 2010 RTM bits, so I created it as a site collection that is evident in the URLs you see below. In the screenshots below, you can see that the URL of the SharePoint search service in the Search site collection is http://sps2010/sites/search/_vti_bin/search.asmx, and the URL of the People Search Results page is http://sps2010/sites/Search/Pages/peopleresults.aspx. Point Communications Server 14 to Search and People Search Results Pages For Communicator 14 to be able to perform an Expert Search, you need to configure Communications Server 14 to point to the Search Service and People Search Results page URLs. From a server with the OCS Core bits installed, fire up the Communications Server Management Shell and type Get-CsClientPolicy. Scroll down to the bottom of the output, were interested in setting the values of: SPSearchInternalURL SPSearchExternalURL SPSearchCenterInternalURL SPSearchCenterExternalURL SPSearchInternalURL and SPSearchExternalURL correspond to the internal and external URLs of the SharePoint search service in the Search site collection, while SPSearchCenterInternalURL and SPSearchCenterExternalURL correspond to the internal and external URLs of the people search results pages. Well use the Communications Server Management Shell to set the values of these CS policy properties. For simplicity, Im only going to set the internal URLs here. Set-CsClientPolicy SPSearchInternalURL http://sps2010/sites/search/_vti_bin/search.asmx     -SPSearchCenterInternalURL http://sps2010/sites/Search/Pages/peopleresults.aspx Log out and back into Communicator.  You can verify that these settings were applied by running the Get-CsClientPolicy cmdlet again from the Communications Server Management Shell. However, theres another super-secret ninja trick to verify that the settings were applied: Find the Communicator icon in the Windows System Tray Hold down the Ctrl button Click (left) the Communicator icon in the Windows System Tray do not depress the Ctrl button You should now see an extra menu item called Configuration Information, click it. Scroll down and locate the Expert Search URL and SharePoint Search Center URL keys and verify that their values correspond to those you set using the Set-CsClientPolicy PowerShell cmdlet. Configure a Sharepoint User Profile Import Im not going to provide detailed steps here except to say that you need to configure the SharePoint 2010 User Profile  Service Application to import user account details from Active Directory on a scheduled basis. This is a critical step because there are several user profile properties e.g. SipAddress that are only populated by a user profile import.  When performing an Expert Search, Communicator can only render results for users who have a SipAddress specified. Add Skills to User Profiles Navigate to your My Site and click on My Profile.  This page allows you to set many contact details that are searchable in SharePoint.  Were particularly interested in the Ask Me About property of a users profile.  Expert Search searches against this property to find users with matching skills. Configure a SharePoint Search Crawl Ensure that you have a scheduled job to crawl your Local SharePoint Sites content source.  Depending on how you have this configured, it will also crawl the My Site site collection and add user properties such as Ask Me About to the search index. Thats It! SharePoint 2010 provides new social and collaboration features to help users find other users with similar skills or interests. Expert Search extends this functionality directly into Microsoft Communicator 14, allowing you to interact with the users directly from the search results. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How to properly add texture to multi-fixture/shape b2Body

  - by Blazej Wdowikowski

  Hello to everyone this is my first poste here I hope that will be not fail start. At start I must say I make part 1 in Ray's Tutorial "How To Make A Game Like Fruit Ninja With Box2D and Cocos2D". But I wonder what when I want make more complex body with texture? Simple just add n b2FixtureDef to the same body. OK but what about texture? If I will take code from that tutorial it only fill last fixture. Probably it does not takes every b2Vec2 point. I was right, it did not. So quick refactor and from that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int vertexCount = shape->GetVertexCount(); NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; for(int i = 0; i < vertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width, _centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I came up with that -(id)initWithTexture:(CCTexture2D*)texture body:(b2Body*)body original:(BOOL)original { int vertexCount = 0; //gather total number of b2Vect2 points b2Fixture *currentFixture = body->GetFixtureList(); while (currentFixture) { //new b2PolygonShape *shape = (b2PolygonShape*)currentFixture->GetShape(); vertexCount += shape->GetVertexCount(); currentFixture = currentFixture->GetNext(); } NSMutableArray *points = [NSMutableArray arrayWithCapacity:vertexCount]; // gather all the vertices from our Box2D shape b2Fixture *originalFixture = body->GetFixtureList(); while (originalFixture) { //new NSLog((NSString*)@"-"); b2PolygonShape *shape = (b2PolygonShape*)originalFixture->GetShape(); int currentVertexCount = shape->GetVertexCount(); for(int i = 0; i < currentVertexCount; i++) { CGPoint p = ccp(shape->GetVertex(i).x * PTM_RATIO, shape->GetVertex(i).y * PTM_RATIO); [points addObject:[NSValue valueWithCGPoint:p]]; } originalFixture = originalFixture->GetNext(); } if ((self = [super initWithPoints:points andTexture:texture])) { _body = body; _body->SetUserData(self); _original = original; // gets the center of the polygon _centroid = self.body->GetLocalCenter(); // assign an anchor point based on the center self.anchorPoint = ccp(_centroid.x * PTM_RATIO / texture.contentSize.width,_centroid.y * PTM_RATIO / texture.contentSize.height); } return self; } I was working for simple two fixtures body like b2BodyDef bodyDef; bodyDef.type = b2_dynamicBody; bodyDef.position = position; bodyDef.angle = rotation; b2Body *body = world->CreateBody(&bodyDef); b2FixtureDef fixtureDef; fixtureDef.density = 1.0; fixtureDef.friction = 0.5; fixtureDef.restitution = 0.2; fixtureDef.filter.categoryBits = 0x0001; fixtureDef.filter.maskBits = 0x0001; b2Vec2 vertices[] = { b2Vec2(0.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(0.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(50.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(60.0/PTM_RATIO,60.0/PTM_RATIO) }; b2PolygonShape shape; shape.Set(vertices, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); b2Vec2 vertices2[] = { b2Vec2(20.0/PTM_RATIO,50.0/PTM_RATIO), b2Vec2(20.0/PTM_RATIO,0.0/PTM_RATIO), b2Vec2(70.0/PTM_RATIO,30.1/PTM_RATIO), b2Vec2(80.0/PTM_RATIO,60.0/PTM_RATIO) }; shape.Set(vertices2, 4); fixtureDef.shape = &shape; body->CreateFixture(&fixtureDef); But if I try put secondary shape upper than first it starting wierd, texture goes crazy. For example not mention about more complex shapes. What's more if shapes have one common point texture will not render for them at all [For that I use Physics Edytor like in tutorial part1] BTW. I use PolygonSprite and in method createWithWorld... another shapes. Uff.. Question So my question is, why texture coords are in such a mess up? It's my modify method or just wrong approach? Maybe I should remove duplicated from points array?

  Read the article

• Android edtftpj/PRo SFTP heap worker problem

  - by Mr. Kakakuwa Bird

  Hi I am using edtftpj-pro3.1 trial copy in my android app to make SFTP connection with the server. After few connections with the server with 5-6 file transfers, my app is crashing with following exception. Is it causing the problem or what could be the problem?? I tried setParallelMode(false) in SSHFTPClient, but it is not working. Exception i'm getting is, 05-31 18:28:12.661: ERROR/dalvikvm(589): HeapWorker is wedged: 10173ms spent inside Lcom/enterprisedt/net/j2ssh/sftp/SftpFileInputStream;.finalize()V 05-31 18:28:12.661: INFO/dalvikvm(589): DALVIK THREADS: 05-31 18:28:12.661: INFO/dalvikvm(589): "main" prio=5 tid=3 WAIT 05-31 18:28:12.661: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x4001b260 self=0xbd18 05-31 18:28:12.661: INFO/dalvikvm(589): | sysTid=589 nice=0 sched=0/0 cgrp=default handle=-1343993192 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.Object.wait(Native Method) 05-31 18:28:12.661: INFO/dalvikvm(589): - waiting on <0x122d70 (a android.os.MessageQueue) 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.Object.wait(Object.java:288) 05-31 18:28:12.661: INFO/dalvikvm(589): at android.os.MessageQueue.next(MessageQueue.java:148) 05-31 18:28:12.661: INFO/dalvikvm(589): at android.os.Looper.loop(Looper.java:110) 05-31 18:28:12.661: INFO/dalvikvm(589): at android.app.ActivityThread.main(ActivityThread.java:4363) 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.reflect.Method.invokeNative(Native Method) 05-31 18:28:12.661: INFO/dalvikvm(589): at java.lang.reflect.Method.invoke(Method.java:521) 05-31 18:28:12.661: INFO/dalvikvm(589): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 05-31 18:28:12.661: INFO/dalvikvm(589): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 05-31 18:28:12.661: INFO/dalvikvm(589): at dalvik.system.NativeStart.main(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): "Transport protocol 1" daemon prio=5 tid=29 NATIVE 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x44774768 self=0x3a7938 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=605 nice=0 sched=0/0 cgrp=default handle=3834600 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.platform.OSNetworkSystem.receiveStreamImpl(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.platform.OSNetworkSystem.receiveStream(OSNetworkSystem.java:478) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.net.PlainSocketImpl.read(PlainSocketImpl.java:565) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.net.SocketInputStream.read(SocketInputStream.java:87) 05-31 18:28:12.671: INFO/dalvikvm(589): at org.apache.harmony.luni.net.SocketInputStream.read(SocketInputStream.java:67) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.io.BufferedInputStream.fillbuf(BufferedInputStream.java:157) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.io.BufferedInputStream.read(BufferedInputStream.java:346) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.io.BufferedInputStream.read(BufferedInputStream.java:341) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.A.A((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.A.B((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.TransportProtocolCommon.processMessages((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.TransportProtocolCommon.startBinaryPacketProtocol((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.transport.TransportProtocolCommon.run((null):-1) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.671: INFO/dalvikvm(589): "StreamFrameSender" prio=5 tid=27 TIMED_WAIT 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x44750a60 self=0x3964d8 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=603 nice=0 sched=0/0 cgrp=default handle=3761648 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): - waiting on <0x399478 (a com.corventis.gateway.ppp.StreamFrameSender) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Object.java:326) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.ppp.StreamFrameSender.run(StreamFrameSender.java:154) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.util.MonitoredRunnable.run(MonitoredRunnable.java:41) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.671: INFO/dalvikvm(589): "SftpActiveWorker" prio=5 tid=25 TIMED_WAIT 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x447522b0 self=0x398e00 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=604 nice=0 sched=0/0 cgrp=default handle=3762704 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Native Method) 05-31 18:28:12.671: INFO/dalvikvm(589): - waiting on <0x3962d8 (a com.corventis.gateway.hostcommunicator.SftpActiveWorker) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Object.wait(Object.java:326) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.SftpActiveWorker.run(SftpActiveWorker.java:151) 05-31 18:28:12.671: INFO/dalvikvm(589): at com.corventis.gateway.util.MonitoredRunnable.run(MonitoredRunnable.java:41) 05-31 18:28:12.671: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.671: INFO/dalvikvm(589): "Thread-12" prio=5 tid=23 NATIVE 05-31 18:28:12.671: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x4474aca8 self=0x115690 05-31 18:28:12.671: INFO/dalvikvm(589): | sysTid=602 nice=0 sched=0/0 cgrp=default handle=878120 05-31 18:28:12.671: INFO/dalvikvm(589): at android.bluetooth.BluetoothSocket.acceptNative(Native Method) 05-31 18:28:12.681: INFO/dalvikvm(589): at android.bluetooth.BluetoothSocket.accept(BluetoothSocket.java:287) 05-31 18:28:12.681: INFO/dalvikvm(589): at android.bluetooth.BluetoothServerSocket.accept(BluetoothServerSocket.java:105) 05-31 18:28:12.681: INFO/dalvikvm(589): at android.bluetooth.BluetoothServerSocket.accept(BluetoothServerSocket.java:91) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.bluetooth.BluetoothManager.openPort(BluetoothManager.java:215) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.bluetooth.BluetoothManager.open(BluetoothManager.java:84) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.patchcommunicator.PatchCommunicator.open(PatchCommunicator.java:123) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.patchcommunicator.PatchCommunicatorRunnable.run(PatchCommunicatorRunnable.java:134) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.681: INFO/dalvikvm(589): "HfGatewayApplication" prio=5 tid=21 RUNNABLE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=0 dsCount=0 s=N obj=0x4472d9b0 self=0x120928 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=601 nice=0 sched=0/0 cgrp=default handle=1264672 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.Deflate.deflateInit2(Deflate.java:~1361) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.Deflate.deflateInit(Deflate.java:1316) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.ZStream.deflateInit(ZStream.java:127) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.ZStream.deflateInit(ZStream.java:120) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.jcraft.jzlib.ZOutputStream.(ZOutputStream.java:62) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.zipfile.ZipStorer.addStream(ZipStorer.java:211) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.zipfile.ZipStorer.createZip(ZipStorer.java:127) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.HostCommunicator.scanAndCompress(HostCommunicator.java:453) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.HostCommunicator.doWork(HostCommunicator.java:1434) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hf.HfGatewayApplication.doWork(HfGatewayApplication.java:621) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hf.HfGatewayApplication.run(HfGatewayApplication.java:546) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.util.MonitoredRunnable.run(MonitoredRunnable.java:41) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.681: INFO/dalvikvm(589): "Thread-10" prio=5 tid=19 TIMED_WAIT 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x447287f8 self=0x1451b8 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=598 nice=0 sched=0/0 cgrp=default handle=1331920 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.VMThread.sleep(Native Method) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.sleep(Thread.java:1306) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.sleep(Thread.java:1286) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.util.Watchdog.run(Watchdog.java:167) 05-31 18:28:12.681: INFO/dalvikvm(589): at java.lang.Thread.run(Thread.java:1096) 05-31 18:28:12.681: INFO/dalvikvm(589): "Thread-9" prio=5 tid=17 RUNNABLE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=Y obj=0x44722c90 self=0x114e20 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=597 nice=0 sched=0/0 cgrp=default handle=1200048 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.time.Time.currentTimeMillis(Time.java:~77) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.patchcommunicator.PatchCommunicatorState$1.run(PatchCommunicatorState.java:27) 05-31 18:28:12.681: INFO/dalvikvm(589): "Thread-8" prio=5 tid=15 RUNNABLE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=Y obj=0x44722430 self=0x124dd0 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=596 nice=0 sched=0/0 cgrp=default handle=1199848 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.time.Time.currentTimeMillis(Time.java:~80) 05-31 18:28:12.681: INFO/dalvikvm(589): at com.corventis.gateway.hostcommunicator.HostCommunicatorState$1.run(HostCommunicatorState.java:35) 05-31 18:28:12.681: INFO/dalvikvm(589): "Binder Thread #2" prio=5 tid=13 NATIVE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x4471ccc0 self=0x149b60 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=595 nice=0 sched=0/0 cgrp=default handle=1317992 05-31 18:28:12.681: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.681: INFO/dalvikvm(589): "Binder Thread #1" prio=5 tid=11 NATIVE 05-31 18:28:12.681: INFO/dalvikvm(589): | group="main" sCount=1 dsCount=0 s=N obj=0x447159a8 self=0x123298 05-31 18:28:12.681: INFO/dalvikvm(589): | sysTid=594 nice=0 sched=0/0 cgrp=default handle=1164896 05-31 18:28:12.681: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: INFO/dalvikvm(589): "JDWP" daemon prio=5 tid=9 VMWAIT 05-31 18:28:12.691: INFO/dalvikvm(589): | group="system" sCount=1 dsCount=0 s=N obj=0x4470f2a0 self=0x141a90 05-31 18:28:12.691: INFO/dalvikvm(589): | sysTid=593 nice=0 sched=0/0 cgrp=default handle=1316864 05-31 18:28:12.691: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: INFO/dalvikvm(589): "Signal Catcher" daemon prio=5 tid=7 VMWAIT 05-31 18:28:12.691: INFO/dalvikvm(589): | group="system" sCount=1 dsCount=0 s=N obj=0x4470f1e8 self=0x124970 05-31 18:28:12.691: INFO/dalvikvm(589): | sysTid=592 nice=0 sched=0/0 cgrp=default handle=1316800 05-31 18:28:12.691: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: INFO/dalvikvm(589): "HeapWorker" daemon prio=5 tid=5 MONITOR 05-31 18:28:12.691: INFO/dalvikvm(589): | group="system" sCount=1 dsCount=0 s=N obj=0x431b4550 self=0x141670 05-31 18:28:12.691: INFO/dalvikvm(589): | sysTid=591 nice=0 sched=0/0 cgrp=default handle=1316400 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpSubsystemClient.closeHandle((null):~-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpSubsystemClient.closeFile((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpFile.close((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpFileInputStream.close((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at com.enterprisedt.net.j2ssh.sftp.SftpFileInputStream.finalize((null):-1) 05-31 18:28:12.691: INFO/dalvikvm(589): at dalvik.system.NativeStart.run(Native Method) 05-31 18:28:12.691: ERROR/dalvikvm(589): VM aborting 05-31 18:28:12.801: INFO/DEBUG(49): * ** * ** * ** * ** * ** * 05-31 18:28:12.801: INFO/DEBUG(49): Build fingerprint: 'google/passion/passion/mahimahi:2.1-update1/ERE27/24178:user/release-keys' 05-31 18:28:12.801: INFO/DEBUG(49): pid: 589, tid: 601 com.corventis.gateway.hf <<< 05-31 18:28:12.801: INFO/DEBUG(49): signal 11 (SIGSEGV), fault addr deadd00d 05-31 18:28:12.801: INFO/DEBUG(49): r0 00000026 r1 afe13329 r2 afe13329 r3 00000000 05-31 18:28:12.801: INFO/DEBUG(49): r4 ad081f50 r5 400091e8 r6 009b3a6a r7 00000000 05-31 18:28:12.801: INFO/DEBUG(49): r8 000002e8 r9 ad082ba0 10 ad082ba0 fp 00000000 05-31 18:28:12.801: INFO/DEBUG(49): ip deadd00d sp 46937c58 lr afe14373 pc ad035b4c cpsr 20000030 05-31 18:28:12.851: INFO/DEBUG(49): #00 pc 00035b4c /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #01 pc 00044d7c /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #02 pc 000162e4 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #03 pc 00016b60 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #04 pc 00016ce0 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #05 pc 00057b64 /system/lib/libdvm.so 05-31 18:28:12.861: INFO/DEBUG(49): #06 pc 00057cc0 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #07 pc 00057dd4 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #08 pc 00012ffc /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #09 pc 00019338 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #10 pc 00018804 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #11 pc 0004eed0 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #12 pc 0004eef8 /system/lib/libdvm.so 05-31 18:28:12.871: INFO/DEBUG(49): #13 pc 000426d4 /system/lib/libdvm.so 05-31 18:28:12.881: INFO/DEBUG(49): #14 pc 0000fd74 /system/lib/libc.so 05-31 18:28:12.881: INFO/DEBUG(49): #15 pc 0000f840 /system/lib/libc.so 05-31 18:28:12.881: INFO/DEBUG(49): code around pc: 05-31 18:28:12.881: INFO/DEBUG(49): ad035b3c 58234808 b1036b9b f8df4798 2026c01c 05-31 18:28:12.881: INFO/DEBUG(49): ad035b4c 0000f88c ef52f7d8 0004c428 fffe631c 05-31 18:28:12.881: INFO/DEBUG(49): ad035b5c fffe94f4 000002f8 deadd00d f8dfb40e 05-31 18:28:12.881: INFO/DEBUG(49): code around lr: 05-31 18:28:12.881: INFO/DEBUG(49): afe14360 686768a5 f9b5e008 b120000c 46289201 05-31 18:28:12.881: INFO/DEBUG(49): afe14370 9a014790 35544306 37fff117 6824d5f3 05-31 18:28:12.881: INFO/DEBUG(49): afe14380 d1ed2c00 bdfe4630 00026ab0 000000b4 05-31 18:28:12.881: INFO/DEBUG(49): stack: 05-31 18:28:12.881: INFO/DEBUG(49): 46937c18 00000015 05-31 18:28:12.881: INFO/DEBUG(49): 46937c1c afe13359 /system/lib/libc.so 05-31 18:28:12.881: INFO/DEBUG(49): 46937c20 afe3b02c /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c24 afe3afd8 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c28 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c2c afe14373 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c30 afe13329 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c34 afe13329 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c38 afe13380 /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c3c ad081f50 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c40 400091e8 /dev/ashmem/mspace/dalvik-heap/zygote/0 (deleted) 05-31 18:28:12.891: INFO/DEBUG(49): 46937c44 009b3a6a 05-31 18:28:12.891: INFO/DEBUG(49): 46937c48 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c4c afe1338d /system/lib/libc.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c50 df002777 05-31 18:28:12.891: INFO/DEBUG(49): 46937c54 e3a070ad 05-31 18:28:12.891: INFO/DEBUG(49): #00 46937c58 ad06f573 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c5c ad044d81 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): #01 46937c60 000027bd 05-31 18:28:12.891: INFO/DEBUG(49): 46937c64 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c68 463b6ab4 /data/dalvik-cache/data@[email protected]@classes.dex 05-31 18:28:12.891: INFO/DEBUG(49): 46937c6c 463d1ecf /data/dalvik-cache/data@[email protected]@classes.dex 05-31 18:28:12.891: INFO/DEBUG(49): 46937c70 00140450 [heap] 05-31 18:28:12.891: INFO/DEBUG(49): 46937c74 ad041d2b /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c78 ad082f2c /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c7c ad06826c /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c80 00140450 [heap] 05-31 18:28:12.891: INFO/DEBUG(49): 46937c84 00000000 05-31 18:28:12.891: INFO/DEBUG(49): 46937c88 000002f8 05-31 18:28:12.891: INFO/DEBUG(49): 46937c8c 400091e8 /dev/ashmem/mspace/dalvik-heap/zygote/0 (deleted) 05-31 18:28:12.891: INFO/DEBUG(49): 46937c90 ad081f50 /system/lib/libdvm.so 05-31 18:28:12.891: INFO/DEBUG(49): 46937c94 000002f8 05-31 18:28:12.891: INFO/DEBUG(49): 46937c98 00002710 05-31 18:28:12.891: INFO/DEBUG(49): 46937c9c ad0162e8 /system/lib/libdvm.so Thanks & Regards,

  Read the article

• Jolicloud is a Nifty New OS for Your Netbook

  - by Matthew Guay

  Want to breathe new life into your netbook?  Here’s a quick look at Jolicloud, a unique new Linux based OS that lets you use your netbook in a whole new way. Netbooks have been an interesting category of computers.  When they were first released, most netbooks came with a stripped down Linux based operating system designed to let you easily access the internet first and foremost.  Consumers wanted more from their netbooks, so full OSes such as Windows XP and Ubuntu became the standard on netbooks.  Microsoft worked hard to get Windows 7 working great on netbooks, and today most netbooks run Windows 7 great.  But the Linux community hasn’t stood still either, and Jolicloud is proof of that.  Jolicloud is a unique OS designed to bring the best of both webapps and standard programs to your netbook.   Keep reading to see if this is the perfect netbook OS for you. Getting Started Installing Jolicloud on your netbook is easy thanks to a the Jolicloud Express installer for Windows.  Since many netbooks run Windows by default, this makes it easy to install Jolicloud.  Plus, your Windows install is left untouched, so you can still easily access all your Windows files and programs. Download and run the roughly 700Mb installer (link below) just as a normal installer in Windows. This will first extract the needed files. Click Get started to install Jolicloud on your netbook. Enter a username, password, and nickname for your computer.  Please note that the username must be all lowercase, and the nickname should not contain spaces or special characters.   Now you can review the default installation settings.  By default it will take up 39Gb and install on your C:\ drive in English.  If you wish to change this, click Change. We chose to install it on the D: drive on this netbook, as its harddrive was already partitioned into two parts.  Click Save when your settings are all correct, and then click Next in the previous window. Jolicloud will prepare for the installation.  This took about 5 minutes in our test.  Click Next when this is finished. Click Restart now to install and run Jolicloud. When your netbook reboots, it will initialize the Jolicloud setup. It will then automatically finish the installation.  Just sit back and wait; there’s nothing for you to do right now.  The installation took about 20 minutes in our test. Jolicloud will automatically reboot when the setup is finished. Once it’s rebooted, you’re ready to go!  Enter the username, then the password, that you chose earlier when you were installing Jolicloud from Windows. Welcome to your Jolicloud desktop! Hardware Support We installed Jolicloud on a Samsung N150 netbook with an Atom N450 processor, 1Gb Ram, 250Gb harddrive, and WiFi b/g/n with Bluetooth.  Amazingly, once Jolicloud was installed, everything was ready to use.  No drivers to install, no settings to hassle with, it was all installed and set up perfectly.  Power settings worked great, and closing the netbook put it to sleep just like in Windows. WiFi drivers have typically been difficult to find and install on Linux, but Jolicloud had our netbook’s wifi working immediately.  To get online, simply click the Wireless icon on the top right, and select the wireless network you want to connect to. Jolicloud will let you know when it is signed on. Wired Lan networking was also seamless; simply connect your cable and you’re ready to go.  The webcam and touchpad also worked perfectly directly.  The only thing missing was multitouch; this touchpad has two finger scroll, pinch zoom, and other nice multitouch features in Windows, but in Julicloud it only functioned as a standard touchpad.  It did have tap to click activated by default, as well as right-side scrolling, which is nice. Jolicloud also supported our video card without any extra work.  The native resolution was already selected, and the only problem we had with the screen was that there was no apparent way to change the brightness.  This is not a major problem, but would be nice to have.  The Samsung N150 has Intel GMA3150 integrated graphics, and Jolicloud promises 1080p HD video on it.  It did playback 720p H.264 video flawlessly without installing anything extra, but it stuttered on full 1080p HD (which is the exact same as this netbook’s video playback in Windows 7 – 720p works great, but it stutters on 1080p).  We would be excited to see full HD on this netbook, but 720p is definitely fine for most stuff.   Jolicloud supports a wide range of netbooks, and based on our experience we would expect it to work as good on any supported hardware.  Check out the list of supported netbooks to see if your netbook is supported; if not, it still may work but you may have to install special drivers. Jolicloud’s performance was very similar to Windows 7 on our netbook.  It boots in about 30 seconds, and apps load fairly quickly.  In general, we couldn’t tell much difference in performance between Jolicloud and Windows 7, though this isn’t a problem since Windows 7 runs great on the current generation of netbooks. Using Jolicloud Ready to start putting Jolicloud to use?  Your fresh Jolicloud install you can run several built-in apps, such as Firefox, a calculator, and the chat client Pidgin.  It also has a media player and file viewer installed, so you can play MP3s or MPG videos, or read PDF ebooks without installing anything extra.  It also has Flash player installed so you can watch videos online easily. You can also directly access all of your files from the right side of your home screen.  You can even access your Windows files; in our test, the 116.9 GB Media was C: from Windows.  Select it to browse and open any file you had saved in Windows. You may need to enter your password to access it. Once you’re authenticated it, you’ll see all of your Windows files and folders.  Your User files (Documents, Music, Videos, etc.) will be in the Users folder. And, you can easily add files from removable media such as USB flash drives and memory cards.  Jolicloud recognized a flash drive we tested with no trouble at all. Add new apps But, the best part about Jolicloud is that it makes it very easy to install new apps.  Click the Get Started button on your homescreen. You’ll first need to create an account.  You can then use this same account on another netbook if you wish, and your settings will automatically be synced between the two. You can either signup using your Facebook account, …or you can sign up the traditional way with your email address, name, and password.  If you sign up this way, you will need to confirm your email address before your account will be finished. Now, choose your netbook model from the list, and enter a name for your computer. And that’s it!  You’ll now see the Jolicloud dashboard, which will show you updates and notifications from friends who also use Jolicloud. Click the App directory to find new apps for your netbook.  Here you will find a variety of webapps, such as Gmail, along with native applications, such as Skype, that you can install on your netbook.  Simply click the Install button on the right to add the app to your netbook. You will be prompted to enter your system password, and then the app will install without any further input.   Once an app is installed, a check mark will appear beside its name.  You can remove it by clicking the Remove button, and it will uninstall seamlessly. Webapps, such as Gmail, actually run in in a Chrome-powered window that lets the webapp run full screen.  This gives the webapps a native feel, but actually they’re just running the same as they would in a standard web browser.   The Jolicloud Interface Most apps run maximized, and there is no way to run them smaller.  This in general works good, since with small screens most apps need to run full-screen anyhow. Smaller apps, such as a calculator or the Pidgin chat client, run in a window just like they do on other operating systems. You can switch to another app that’s running by selecting it’s icon on the top left, or you can go back to the home screen by clicking the home screen.  If you’re finished with an program, simply click the red X button on the top right of the window when you’re running it. Or, you can switch between programs using standard keyboard shortcuts such as Alt-tab. The default page on the home screen is the favorites page, and all of your other programs are orginized in their own sections on the left hand side.  But, if you want to add one of these to your favorites page, simply right-click on it and select Add to Favorites. When you’re done for the day, you can simply close your netbook to put it to sleep.  Or, if you want to shut down, just press the Quit button on the bottom right of the home screen and then select Shut Down. Booting Jolicloud When you install Jolicloud, it will set itself as the default operating system.  Now, when you boot your netbook, it will show you a list of installed operating systems.  You can select either Windows or Jolicloud, but if you don’t make a selection it will boot into Jolicloud after waiting 10 seconds. If you’d perfer to boot into Windows by default, you can easily change this.  First, boot your netbook in to Windows.  Open the start menu, right-click on the Computer button, and select Properties.   Click the “Advanced system settings” link on the left side. Click the Settings button in the Startup and Recovery section. Now, select Windows as the default operating system, and click Ok.  Your netbook will now boot into Windows by default, but will give you 10 seconds to choose to boot into Jolicloud when you start your computer. Or, if you decided you don’t want Jolicloud, you can easily uninstall it from within Windows. Please note that this will also remove any files you may have saved in Jolicloud, so be sure to copy them to your Windows drive before uninstalling. To uninstall Jolicloud from within Windows, open Control Panel, and select Uninstall a Program. Scroll down to select Jolicloud, and click Uninstall/Change. Click Yes to confirm that you want to uninstall Jolicloud. After a few moments, it will let you know that Jolicloud has been uninstalled.  You’re netbook is now back the same as it was before you installed Jolicloud, with only Windows installed. Closing Whether you’re wanting to replace your current OS on your netbook or would simply like to try out a fresh new Linux version on your netbook, Jolicloud is a great option for you.  We were very impressed by it’s solid hardware support and the ease of installing new apps in Jolicloud.  Rather than simply giving us a standard OS, Jolicloud offers a unique way to use your netbook with native programs and webapps.  And whether you’re an IT pro or are a new computer user, Jolicloud was easy enough to use that anyone can do it.  Give it a try, and let us know what your favorite netbook OS is! Link Download Jolicloud for your netbook Similar Articles Productive Geek Tips How To Change XSplash Themes in Ubuntu 9.10Verify the Integrity of Windows Vista System FilesMonitor Multiple Logs in a Single Shell with MultiTail for LinuxHide Some or All of the GUI Bars in FirefoxAsk the Readers: Do You Use a Laptop, Desktop, or Both? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Stop In The Name Of Love (Firefox addon) Chitika iPad Labs Gives Live iPad Sale Stats Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically

  Read the article

• Windows Azure Evolution &ndash; Caching (Preview)

  - by Shaun

  Caching is a popular topic when we are building a high performance and high scalable system not only on top of the cloud platform but the on-premise environment as well. On March 2011 the Windows Azure AppFabric Caching had been production launched. It provides an in-memory, distributed caching service over the cloud. And now, in this June 2012 update, the cache team announce a grand new caching solution on Windows Azure, which is called Windows Azure Caching (Preview). And the original Windows Azure AppFabric Caching was renamed to Windows Azure Shared Caching.   What’s Caching (Preview) If you had been using the Shared Caching you should know that it is constructed by a bunch of cache servers. And when you want to use you should firstly create a cache account from the developer portal and specify the size you want to use, which means how much memory you can use to store your data that wanted to be cached. Then you can add, get and remove them through your code through the cache URL. The Shared Caching is a multi-tenancy system which host all cached items across all users. So you don’t know which server your data was located. This caching mode works well and can take most of the cases. But it has some problems. The first one is the performance. Since the Shared Caching is a multi-tenancy system, which means all cache operations should go through the Shared Caching gateway and then routed to the server which have the data your are looking for. Even though there are some caches in the Shared Caching system it also takes time from your cloud services to the cache service. Secondary, the Shared Caching service works as a block box to the developer. The only thing we know is my cache endpoint, and that’s all. Someone may satisfied since they don’t want to care about anything underlying. But if you need to know more and want more control that’s impossible in the Shared Caching. The last problem would be the price and cost-efficiency. You pay the bill based on how much cache you requested per month. But when we host a web role or worker role, it seldom consumes all of the memory and CPU in the virtual machine (service instance). If using Shared Caching we have to pay for the cache service while waste of some of our memory and CPU locally. Since the issues above Microsoft offered a new caching mode over to us, which is the Caching (Preview). Instead of having a separated cache service, the Caching (Preview) leverage the memory and CPU in our cloud services (web role and worker role) as the cache clusters. Hence the Caching (Preview) runs on the virtual machines which hosted or near our cloud applications. Without any gateway and routing, since it located in the same data center and same racks, it provides really high performance than the Shared Caching. The Caching (Preview) works side-by-side to our application, initialized and worked as a Windows Service running in the virtual machines invoked by the startup tasks from our roles, we could get more information and control to them. And since the Caching (Preview) utilizes the memory and CPU from our existing cloud services, so it’s free. What we need to pay is the original computing price. And the resource on each machines could be used more efficiently.   Enable Caching (Preview) It’s very simple to enable the Caching (Preview) in a cloud service. Let’s create a new windows azure cloud project from Visual Studio and added an ASP.NET Web Role. Then open the role setting and select the Caching page. This is where we enable and configure the Caching (Preview) on a role. To enable the Caching (Preview) just open the “Enable Caching (Preview Release)” check box. And then we need to specify which mode of the caching clusters we want to use. There are two kinds of caching mode, co-located and dedicate. The co-located mode means we use the memory in the instances we run our cloud services (web role or worker role). By using this mode we must specify how many percentage of the memory will be used as the cache. The default value is 30%. So make sure it will not affect the role business execution. The dedicate mode will use all memory in the virtual machine as the cache. In fact it will reserve some for operation system, azure hosting etc.. But it will try to use as much as the available memory to be the cache. As you can see, the Caching (Preview) was defined based on roles, which means all instances of this role will apply the same setting and play as a whole cache pool, and you can consume it by specifying the name of the role, which I will demonstrate later. And in a windows azure project we can have more than one role have the Caching (Preview) enabled. Then we will have more caches. For example, let’s say I have a web role and worker role. The web role I specified 30% co-located caching and the worker role I specified dedicated caching. If I have 3 instances of my web role and 2 instances of my worker role, then I will have two caches. As the figure above, cache 1 was contributed by three web role instances while cache 2 was contributed by 2 worker role instances. Then we can add items into cache 1 and retrieve it from web role code and worker role code. But the items stored in cache 1 cannot be retrieved from cache 2 since they are isolated. Back to our Visual Studio we specify 30% of co-located cache and use the local storage emulator to store the cache cluster runtime status. Then at the bottom we can specify the named caches. Now we just use the default one. Now we had enabled the Caching (Preview) in our web role settings. Next, let’s have a look on how to consume our cache.   Consume Caching (Preview) The Caching (Preview) can only be consumed by the roles in the same cloud services. As I mentioned earlier, a cache contributed by web role can be connected from a worker role if they are in the same cloud service. But you cannot consume a Caching (Preview) from other cloud services. This is different from the Shared Caching. The Shared Caching is opened to all services if it has the connection URL and authentication token. To consume the Caching (Preview) we need to add some references into our project as well as some configuration in the Web.config. NuGet makes our life easy. Right click on our web role project and select “Manage NuGet packages”, and then search the package named “WindowsAzure.Caching”. In the package list install the “Windows Azure Caching Preview”. It will download all necessary references from the NuGet repository and update our Web.config as well. Open the Web.config of our web role and find the “dataCacheClients” node. Under this node we can specify the cache clients we are going to use. For each cache client it will use the role name to identity and find the cache. Since we only have this web role with the Caching (Preview) enabled so I pasted the current role name in the configuration. Then, in the default page I will add some code to show how to use the cache. I will have a textbox on the page where user can input his or her name, then press a button to generate the email address for him/her. And in backend code I will check if this name had been added in cache. If yes I will return the email back immediately. Otherwise, I will sleep the tread for 2 seconds to simulate the latency, then add it into cache and return back to the page. 1: protected void btnGenerate_Click(object sender, EventArgs e) 2: { 3: // check if name is specified 4: var name = txtName.Text; 5: if (string.IsNullOrWhiteSpace(name)) 6: { 7: lblResult.Text = "Error. Please specify name."; 8: return; 9: } 10:  11: bool cached; 12: var sw = new Stopwatch(); 13: sw.Start(); 14:  15: // create the cache factory and cache 16: var factory = new DataCacheFactory(); 17: var cache = factory.GetDefaultCache(); 18:  19: // check if the name specified is in cache 20: var email = cache.Get(name) as string; 21: if (email != null) 22: { 23: cached = true; 24: sw.Stop(); 25: } 26: else 27: { 28: cached = false; 29: // simulate the letancy 30: Thread.Sleep(2000); 31: email = string.Format("{0}@igt.com", name); 32: // add to cache 33: cache.Add(name, email); 34: } 35:  36: sw.Stop(); 37: lblResult.Text = string.Format( 38: "Cached = {0}. Duration: {1}s. {2} => {3}", 39: cached, sw.Elapsed.TotalSeconds.ToString("0.00"), name, email); 40: } The Caching (Preview) can be used on the local emulator so we just F5. The first time I entered my name it will take about 2 seconds to get the email back to me since it was not in the cache. But if we re-enter my name it will be back at once from the cache. Since the Caching (Preview) is distributed across all instances of the role, so we can scaling-out it by scaling-out our web role. Just use 2 instances and tweak some code to show the current instance ID in the page, and have another try. Then we can see the cache can be retrieved even though it was added by another instance.   Consume Caching (Preview) Across Roles As I mentioned, the Caching (Preview) can be consumed by all other roles within the same cloud service. For example, let’s add another web role in our cloud solution and add the same code in its default page. In the Web.config we add the cache client to one enabled in the last role, by specifying its role name here. Then we start the solution locally and go to web role 1, specify the name and let it generate the email to us. Since there’s no cache for this name so it will take about 2 seconds but will save the email into cache. And then we go to web role 2 and specify the same name. Then you can see it retrieve the email saved by the web role 1 and returned back very quickly. Finally then we can upload our application to Windows Azure and test again. Make sure you had changed the cache cluster status storage account to the real azure account.   More Awesome Features As a in-memory distributed caching solution, the Caching (Preview) has some fancy features I would like to highlight here. The first one is the high availability support. This is the first time I have heard that a distributed cache support high availability. In the distributed cache world if a cache cluster was failed, the data it stored will be lost. This behavior was introduced by Memcached and is followed by almost all distributed cache productions. But Caching (Preview) provides high availability, which means you can specify if the named cache will be backup automatically. If yes then the data belongs to this named cache will be replicated on another role instance of this role. Then if one of the instance was failed the data can be retrieved from its backup instance. To enable the backup just open the Caching page in Visual Studio. In the named cache you want to enable backup, change the Backup Copies value from 0 to 1. The value of Backup Copies only for 0 and 1. “0” means no backup and no high availability while “1” means enabled high availability with backup the data into another instance. But by using the high availability feature there are something we need to make sure. Firstly the high availability does NOT means the data in cache will never be lost for any kind of failure. For example, if we have a role with cache enabled that has 10 instances, and 9 of them was failed, then most of the cached data will be lost since the primary and backup instance may failed together. But normally is will not be happened since MS guarantees that it will use the instance in the different fault domain for backup cache. Another one is that, enabling the backup means you store two copies of your data. For example if you think 100MB memory is OK for cache, but you need at least 200MB if you enabled backup. Besides the high availability, the Caching (Preview) support more features introduced in Windows Server AppFabric Caching than the Windows Azure Shared Caching. It supports local cache with notification. It also support absolute and slide window expiration types as well. And the Caching (Preview) also support the Memcached protocol as well. This means if you have an application based on Memcached, you can use Caching (Preview) without any code changes. What you need to do is to change the configuration of how you connect to the cache. Similar as the Windows Azure Shared Caching, MS also offers the out-of-box ASP.NET session provider and output cache provide on top of the Caching (Preview).   Summary Caching is very important component when we building a cloud-based application. In the June 2012 update MS provides a new cache solution named Caching (Preview). Different from the existing Windows Azure Shared Caching, Caching (Preview) runs the cache cluster within the role instances we have deployed to the cloud. It gives more control, more performance and more cost-effect. So now we have two caching solutions in Windows Azure, the Shared Caching and Caching (Preview). If you need a central cache service which can be used by many cloud services and web sites, then you have to use the Shared Caching. But if you only need a fast, near distributed cache, then you’d better use Caching (Preview).   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Dual booting on separate hard drives

  - by tornadorider

  I have windows XP professional installed on 1 hard drive and Ubuntu 10.10 on my second hard drive. On start up the computer completely skips the grub menu and boots straight into 10.10. I have tried running os-prober with the windows hard drive mounted and then updating grub but it didnt work. Any ideas? I have changed the boot order so that the HDD with xp on it is first however the computer still booted into linux. I tried running grub-install /dev/sda and got this /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. /usr/sbin/grub-setup: warn: Sector 33 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. Installation finished. No error reported I checked using disk utility and the code for my xp hard drive is sdb so i ran the camand grub-install /dev/sdb shich gave me this Installation finished. No error reported. So i rebooted but it still didnt work. Any other ideas? Additional info gedit /boot/grub/grub.cfg: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### sudo fdisk -l: Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008a483 Device Boot Start End Blocks Id System /dev/sda1 * 1 9352 75112448 83 Linux /dev/sda2 9352 9734 3068929 5 Extended /dev/sda5 9352 9734 3068928 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc5d6c5d6 Device Boot Start End Blocks Id System /dev/sdb1 1 60800 488375968+ 7 HPFS/NTFS sudo blkid /dev/sda1: UUID="d682c9bd-dd89-4827-9802-a1f921ebe21c" TYPE="ext4" /dev/sda5: UUID="09e9c2cb-d903-4f0b-a181-536951845231" TYPE="swap" /dev/sdb1: UUID="B21844EB1844AFE1" TYPE="ntfs" sudo os-prober (nothing) Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub. => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for (,msdos1)/boot/grub. sda1: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: _________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files/dirs: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders, total 156368016 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 150,226,943 150,224,896 83 Linux /dev/sda2 150,228,990 156,366,847 6,137,858 5 Extended /dev/sda5 150,228,992 156,366,847 6,137,856 82 Linux swap / Solaris Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 63 976,751,999 976,751,937 7 HPFS/NTFS blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 d682c9bd-dd89-4827-9802-a1f921ebe21c ext4 /dev/sda2: PTTYPE="dos" /dev/sda5 09e9c2cb-d903-4f0b-a181-536951845231 swap /dev/sda: PTTYPE="dos" /dev/sdb1 B21844EB1844AFE1 ntfs /dev/sdb: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. menuentry "Windows XP" { set root=(hd1,1) chainloader (hd1,1)+1 } ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda1/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=09e9c2cb-d903-4f0b-a181-536951845231 none swap sw 0 0 =================== sda1: Location of files loaded by Grub: =================== 51.7GB: boot/grub/core.img 58.5GB: boot/grub/grub.cfg 1.2GB: boot/initrd.img-2.6.35-22-generic 1.3GB: boot/initrd.img-2.6.35-28-generic 58.2GB: boot/vmlinuz-2.6.35-22-generic 51.7GB: boot/vmlinuz-2.6.35-28-generic 1.3GB: initrd.img 1.2GB: initrd.img.old 51.7GB: vmlinuz 58.2GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sda2 00000000 d9 ed 13 ab ff a8 33 8c 01 b2 47 99 e1 4a b1 f1 |......3...G..J..| 00000010 69 5f a7 29 a4 1a 03 9e 31 b9 45 02 71 e6 58 78 |i_.)....1.E.q.Xx| 00000020 3d f6 ee 7b 3e 33 1b 82 c6 7d cf 1a c8 e7 bc 2f |=..{>3...}...../| 00000030 b9 e1 70 75 cf 18 aa e7 d5 7e 3c f1 b4 e7 9e 3a |..pu.....~<....:| 00000040 55 38 f1 b4 ee 78 59 0b 5e f7 3c 4c 57 73 9c 2a |U8...xY.^.<LWs.*| 00000050 28 f1 19 ed 11 9c b2 19 e2 80 92 1c 7b 84 ee 0b |(...........{...| 00000060 e2 c0 ac af 0a 50 42 b9 cf 0c dc 2c 20 77 85 dc |.....PB...., w..| 00000070 8f 70 5f 7b 84 9b a1 f7 8c 2d ee 70 5c ae f7 39 |.p_{.....-.p\..9| 00000080 63 f7 09 8a ec 79 4c ed 9f cc ad 3c f8 1b 47 7d |c....yL....<..G}| 00000090 3f 97 d5 16 cb 29 45 38 25 61 36 08 de 10 93 0f |?....)E8%a6.....| 000000a0 95 4f ea 54 f9 89 ff f1 bf 9a cc bb fd b6 22 b1 |.O.T..........".| 000000b0 65 08 05 21 78 19 46 b0 24 7e fb de d4 b3 ba d6 |e..!x.F.$~......| 000000c0 ec 11 65 82 ee 10 1d 12 04 91 da 6d 67 47 ea 9b |..e........mgG..| 000000d0 6f b0 aa fb cb 67 10 64 86 e8 26 85 fb f9 50 77 |o....g.d..&...Pw| 000000e0 9d 13 9b 9e d9 11 f3 a1 50 1b 11 b7 93 79 9f ab |........P....y..| 000000f0 c1 b6 86 0f 35 ed d4 9f dc f8 db bd ed 45 3a 68 |....5........E:h| 00000100 54 68 4a 1d d1 fc b8 c9 72 b4 d7 7b 60 e7 39 2f |ThJ.....r..{`.9/| 00000110 2a 0a 4e 52 72 52 c6 e2 2a 55 6a 2a e1 82 40 71 |*.NRrR..*Uj*..@q| 00000120 11 11 e0 53 d6 ff 1b a9 c6 65 df 1e b7 15 6f a2 |...S.....e....o.| 00000130 15 02 a4 6d 19 b7 78 57 a6 ee 9e 36 08 7d 6f 7c |...m..xW...6.}o|| 00000140 fd f7 7c d5 40 ff 0f c7 97 dc aa 00 ce 8b bb dc |..|.@...........| 00000150 e2 eb 1c 50 74 d8 14 cc 9a d6 5c a2 ab f2 67 f9 |...Pt.....\...g.| 00000160 58 ed 43 79 0e 78 7a 5c a6 f8 7b e8 05 4e 62 8a |X.Cy.xz\..{..Nb.| 00000170 0a 5f 22 ee a6 38 b9 e1 32 45 97 08 cc 75 66 c6 |._"..8..2E...uf.| 00000180 b3 a2 2d 89 a1 e9 95 21 28 53 fd dd be b1 b2 a2 |..-....!(S......| 00000190 78 3f a3 c9 3d e3 31 54 88 cf 78 0d e1 21 a8 74 |x?..=.1T..x..!.t| 000001a0 06 60 9d 21 c6 7a 24 e1 cc 28 f8 98 e0 99 e3 fc |.`.!.z$..(......| 000001b0 fa 8b eb d5 56 03 20 b8 54 ba c6 ee 9f 57 00 fe |....V. .T....W..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 a8 5d 00 00 00 |............]...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200

  Read the article

• Wireless card power management

  - by penner

  I have noticed that when my computer in plugged in, the wireless strength increases. I'm assuming this is to do with power management. Is there a way to disable Wireless Power Management? I have found a few blog posts that show hacks to disable this but what is best practice here? Should there not be an option via the power menu that lets you toggle this? EDIT -- FILES AND LOGS AS REQUESTED /var/log/kern.log Jul 11 11:45:27 CoolBreeze kernel: [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532080] [fglrx] Gart USWC size:1280 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532084] [fglrx] Gart cacheable size:508 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Jul 11 11:45:38 CoolBreeze kernel: [ 17.423743] eth1: no IPv6 routers present Jul 11 11:46:37 CoolBreeze kernel: [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) Jul 11 11:46:37 CoolBreeze kernel: [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 Jul 11 11:54:25 CoolBreeze kernel: [ 543.679614] eth1: no IPv6 routers present dmesg [ 1.411959] ACPI: Power Button [PWRB] [ 1.412046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.412054] ACPI: Sleep Button [SLPB] [ 1.412150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.412765] ACPI: Lid Switch [LID0] [ 1.412866] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.412874] ACPI: Power Button [PWRF] [ 1.412996] ACPI: Fan [FAN0] (off) [ 1.413068] ACPI: Fan [FAN1] (off) [ 1.419493] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.419498] ACPI: Thermal Zone [TZ00] (27 C) [ 1.421913] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.421918] ACPI: Thermal Zone [TZ01] (61 C) [ 1.421971] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.421986] ACPI: Battery Slot [BAT0] (battery present) [ 1.422062] ERST: Table is not found! [ 1.422067] GHES: HEST is not enabled! [ 1.422158] isapnp: Scanning for PnP cards... [ 1.422242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.434620] ACPI: Battery Slot [BAT0] (battery present) [ 1.736355] Freeing initrd memory: 14352k freed [ 1.777846] isapnp: No Plug & Play device found [ 1.963650] Linux agpgart interface v0.103 [ 1.967148] brd: module loaded [ 1.968866] loop: module loaded [ 1.969134] ahci 0000:00:1f.2: version 3.0 [ 1.969154] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.969226] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.969277] ahci: SSS flag set, parallel bus scan disabled [ 1.969320] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 1.969329] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.969338] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.983340] scsi0 : ahci [ 1.983515] scsi1 : ahci [ 1.983670] scsi2 : ahci [ 1.983829] scsi3 : ahci [ 1.983985] scsi4 : ahci [ 1.984145] scsi5 : ahci [ 1.984270] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45 [ 1.984277] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45 [ 1.984282] ata3: DUMMY [ 1.984285] ata4: DUMMY [ 1.984288] ata5: DUMMY [ 1.984292] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45 [ 1.985150] Fixed MDIO Bus: probed [ 1.985192] tun: Universal TUN/TAP device driver, 1.6 [ 1.985196] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.985285] PPP generic driver version 2.4.2 [ 1.985472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.985507] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.985534] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.985541] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.985626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.985666] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.989663] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.989690] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800 [ 2.002183] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.002447] hub 1-0:1.0: USB hub found [ 2.002455] hub 1-0:1.0: 3 ports detected [ 2.002607] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.002633] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.002639] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.002737] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.002775] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.006780] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 2.006806] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00 [ 2.022161] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.022401] hub 2-0:1.0: USB hub found [ 2.022409] hub 2-0:1.0: 3 ports detected [ 2.022567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.022599] uhci_hcd: USB Universal Host Controller Interface driver [ 2.022720] usbcore: registered new interface driver libusual [ 2.022813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.035831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.035844] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.036096] mousedev: PS/2 mouse device common for all mice [ 2.036710] rtc_cmos 00:07: RTC can wake from S4 [ 2.036881] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.037143] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.037503] device-mapper: uevent: version 1.0.3 [ 2.037656] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 2.037725] EISA: Probing bus 0 at eisa.0 [ 2.037729] EISA: Cannot allocate resource for mainboard [ 2.037734] Cannot allocate resource for EISA slot 1 [ 2.037738] Cannot allocate resource for EISA slot 2 [ 2.037741] Cannot allocate resource for EISA slot 3 [ 2.037745] Cannot allocate resource for EISA slot 4 [ 2.037749] Cannot allocate resource for EISA slot 5 [ 2.037753] Cannot allocate resource for EISA slot 6 [ 2.037756] Cannot allocate resource for EISA slot 7 [ 2.037760] Cannot allocate resource for EISA slot 8 [ 2.037764] EISA: Detected 0 cards. [ 2.037782] cpufreq-nforce2: No nForce2 chipset. [ 2.038264] cpuidle: using governor ladder [ 2.039015] cpuidle: using governor menu [ 2.039019] EFI Variables Facility v0.08 2004-May-17 [ 2.040061] TCP cubic registered [ 2.041438] NET: Registered protocol family 10 [ 2.043814] NET: Registered protocol family 17 [ 2.043823] Registering the dns_resolver key type [ 2.044290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.044336] Using IPI No-Shortcut mode [ 2.045620] PM: Hibernation image not present or could not be loaded. [ 2.045644] registered taskstats version 1 [ 2.073070] Magic number: 4:976:796 [ 2.073415] rtc_cmos 00:07: setting system clock to 2012-07-11 18:45:23 UTC (1342032323) [ 2.076654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.076658] EDD information not available. [ 2.302111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.302587] ata1.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100 [ 2.302595] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.303143] ata1.00: configured for UDMA/100 [ 2.303453] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F PQ: 0 ANSI: 5 [ 2.303746] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.303920] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.304213] sd 0:0:0:0: [sda] Write Protect is off [ 2.304225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.304471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.306818] sda: sda1 sda2 < sda5 > [ 2.308780] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.318162] Refined TSC clocksource calibration: 1595.999 MHz. [ 2.318169] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.318178] Switching to clocksource tsc [ 2.450939] hub 1-1:1.0: USB hub found [ 2.451121] hub 1-1:1.0: 6 ports detected [ 2.561786] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.621757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.636143] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100 [ 2.636152] ata2.00: applying bridge limits [ 2.649711] ata2.00: configured for UDMA/100 [ 2.653762] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5 [ 2.661486] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.661494] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.661890] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.662156] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.694649] hub 2-1:1.0: USB hub found [ 2.694840] hub 2-1:1.0: 8 ports detected [ 2.765823] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 2.981454] ata6: SATA link down (SStatus 0 SControl 300) [ 2.982597] Freeing unused kernel memory: 740k freed [ 2.983523] Write protecting the kernel text: 5816k [ 2.983808] Write protecting the kernel read-only data: 2376k [ 2.983811] NX-protecting the kernel data: 4424k [ 3.014594] udevd[127]: starting version 175 [ 3.068925] sdhci: Secure Digital Host Controller Interface driver [ 3.068932] sdhci: Copyright(c) Pierre Ossman [ 3.069714] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.069742] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.069786] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.069798] sdhci-pci 0000:09:00.0: setting latency timer to 64 [ 3.069816] mmc0: no vmmc regulator found [ 3.069877] Registered led device: mmc0:: [ 3.070946] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA [ 3.071078] tg3.c:v3.121 (November 2, 2011) [ 3.071252] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.071269] tg3 0000:0b:00.0: setting latency timer to 64 [ 3.071403] firewire_ohci 0000:09:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.071417] firewire_ohci 0000:09:00.3: setting latency timer to 64 [ 3.078509] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.078517] EXT4-fs (sda1): write access will be enabled during recovery [ 3.110417] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address b8:ac:6f:71:02:a6 [ 3.110425] tg3 0000:0b:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 3.110431] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.110436] tg3 0000:0b:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.125492] firewire_ohci: Added fw-ohci device 0000:09:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 3.390124] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.390135] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078710 [ 3.390232] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363071 [ 3.390327] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078711 [ 3.390350] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078709 [ 3.390367] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078708 [ 3.390384] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078707 [ 3.390401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078706 [ 3.390417] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078705 [ 3.390435] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078551 [ 3.390452] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078523 [ 3.390470] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078520 [ 3.390487] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7077901 [ 3.390551] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063272 [ 3.390562] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063266 [ 3.390572] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063261 [ 3.390582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063256 [ 3.390592] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063255 [ 3.390602] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363072 [ 3.390620] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360050 [ 3.390698] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5250064 [ 3.390710] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365394 [ 3.390728] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365390 [ 3.390745] EXT4-fs (sda1): 22 orphan inodes deleted [ 3.390748] EXT4-fs (sda1): recovery complete [ 3.397636] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.624910] firewire_core: created device fw0: GUID 464fc000110e2661, S400 [ 3.927467] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.929965] udevd[400]: starting version 175 [ 3.933581] Adding 6278140k swap on /dev/sda5. Priority:-1 extents:1 across:6278140k SS [ 3.945183] lp: driver loaded but no devices found [ 3.999389] wmi: Mapper loaded [ 4.016696] ite_cir: Auto-detected model: ITE8708 CIR transceiver [ 4.016702] ite_cir: Using model: ITE8708 CIR transceiver [ 4.016706] ite_cir: TX-capable: 1 [ 4.016710] ite_cir: Sample period (ns): 8680 [ 4.016713] ite_cir: TX carrier frequency (Hz): 38000 [ 4.016716] ite_cir: TX duty cycle (%): 33 [ 4.016719] ite_cir: RX low carrier frequency (Hz): 0 [ 4.016722] ite_cir: RX high carrier frequency (Hz): 0 [ 4.025684] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 4.025691] Disabling lock debugging due to kernel taint [ 4.027410] IR NEC protocol handler initialized [ 4.030250] lib80211: common routines for IEEE802.11 drivers [ 4.030257] lib80211_crypt: registered algorithm 'NULL' [ 4.036024] IR RC5(x) protocol handler initialized [ 4.036092] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.036188] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.036307] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.036361] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 4.039006] acpi device:03: registered as cooling_device10 [ 4.039164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 4.039261] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 4.049753] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.050201] wl 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.050215] wl 0000:05:00.0: setting latency timer to 64 [ 4.052252] Registered IR keymap rc-rc6-mce [ 4.052432] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input6 [ 4.054614] IR RC6 protocol handler initialized [ 4.054787] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0 [ 4.054839] ite_cir: driver has been successfully loaded [ 4.057338] IR JVC protocol handler initialized [ 4.061553] IR Sony protocol handler initialized [ 4.066578] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input7 [ 4.066724] IR MCE Keyboard/mouse protocol handler initialized [ 4.072580] lirc_dev: IR Remote Control driver registered, major 250 [ 4.073280] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0 [ 4.073286] IR LIRC bridge handler initialized [ 4.077849] Linux video capture interface: v2.00 [ 4.079402] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:640f) [ 4.085492] EDAC MC: Ver: 2.1.0 [ 4.087138] lib80211_crypt: registered algorithm 'TKIP' [ 4.091027] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.091733] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.091826] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X [ 4.091861] snd_hda_intel 0000:02:00.1: setting latency timer to 64 [ 4.093115] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 4.112448] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 4.112612] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9 [ 4.113311] type=1400 audit(1342032325.540:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=658 comm="apparmor_parser" [ 4.114501] type=1400 audit(1342032325.540:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser" [ 4.115253] type=1400 audit(1342032325.540:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser" [ 4.121870] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10 [ 4.122096] usbcore: registered new interface driver uvcvideo [ 4.122100] USB Video Class driver (1.1.1) [ 4.128729] [fglrx] Maximum main memory to use for locked dma buffers: 5840 MBytes. [ 4.129678] [fglrx] vendor: 1002 device: 68c0 count: 1 [ 4.131991] [fglrx] ioport: bar 4, base 0x2000, size: 0x100 [ 4.132015] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.132024] pci 0000:02:00.0: setting latency timer to 64 [ 4.133712] [fglrx] Kernel PAT support is enabled [ 4.133747] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 4.162666] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38 [ 4.184133] device-mapper: multipath: version 1.3.0 loaded [ 4.196660] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.279897] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 4.292402] Bluetooth: Core ver 2.16 [ 4.292449] NET: Registered protocol family 31 [ 4.292454] Bluetooth: HCI device and connection manager initialized [ 4.292459] Bluetooth: HCI socket layer initialized [ 4.292463] Bluetooth: L2CAP socket layer initialized [ 4.292473] Bluetooth: SCO socket layer initialized [ 4.296333] Bluetooth: RFCOMM TTY layer initialized [ 4.296342] Bluetooth: RFCOMM socket layer initialized [ 4.296345] Bluetooth: RFCOMM ver 1.11 [ 4.313586] ppdev: user-space parallel port driver [ 4.316619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.316625] Bluetooth: BNEP filters: protocol multicast [ 4.383980] type=1400 audit(1342032325.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=938 comm="apparmor_parser" [ 4.385173] type=1400 audit(1342032325.812:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=938 comm="apparmor_parser" [ 4.425757] init: failsafe main process (898) killed by TERM signal [ 4.477052] type=1400 audit(1342032325.904:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1011 comm="apparmor_parser" [ 4.477592] type=1400 audit(1342032325.904:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 4.478099] type=1400 audit(1342032325.904:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1017 comm="apparmor_parser" [ 4.479233] type=1400 audit(1342032325.904:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 4.510060] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 4.510065] vesafb: scrolling: redraw [ 4.510071] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.510084] mtrr: no more MTRRs available [ 4.513081] vesafb: framebuffer at 0xd0000000, mapped to 0xf9400000, using 3904k, total 3904k [ 4.515203] Console: switching to colour frame buffer device 144x54 [ 4.515278] fb0: VESA VGA frame buffer device [ 4.590743] tg3 0000:0b:00.0: irq 48 for MSI/MSI-X [ 4.702009] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.704409] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.978379] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 5.030104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12 [ 5.045782] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 5.519573] [fglrx] ATIF platform detected with notification ID: 0x81 [ 6.391466] fglrx_pci 0000:02:00.0: irq 49 for MSI/MSI-X [ 6.393137] [fglrx] Firegl kernel thread PID: 1305 [ 6.393306] [fglrx] Firegl kernel thread PID: 1306 [ 6.393472] [fglrx] Firegl kernel thread PID: 1307 [ 6.393726] [fglrx] IRQ 49 Enabled [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. [ 6.532080] [fglrx] Gart USWC size:1280 M. [ 6.532084] [fglrx] Gart cacheable size:508 M. [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 17.423743] eth1: no IPv6 routers present [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 [ 543.679614] eth1: no IPv6 routers present lsmod Module Size Used by kvm_intel 127560 0 kvm 359456 1 kvm_intel joydev 17393 0 vesafb 13516 1 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 rfcomm 38139 0 bluetooth 158438 10 bnep,rfcomm dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi binfmt_misc 17292 1 dell_laptop 17767 0 dcdbas 14098 1 dell_laptop dm_multipath 22710 0 fglrx 2909855 143 snd_hda_codec_hdmi 31775 1 psmouse 72919 0 serio_raw 13027 0 i7core_edac 23382 0 lib80211_crypt_tkip 17275 0 edac_core 46858 1 i7core_edac uvcvideo 67203 0 snd_hda_codec_idt 60251 1 videodev 86588 1 uvcvideo ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec ir_mce_kbd_decoder 12681 0 snd_seq_midi 13132 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 snd_rawmidi 25424 1 snd_seq_midi ir_rc6_decoder 12459 0 wl 2646601 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_rc5_decoder 12459 0 video 19068 0 snd_hda_intel 32765 5 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel rc_rc6_mce 12454 0 lib80211 14040 2 lib80211_crypt_tkip,wl snd_hwdep 13276 1 snd_hda_codec ir_nec_decoder 12459 0 snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ite_cir 24743 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ite_cir snd_timer 28931 2 snd_seq,snd_pcm wmi 18744 1 dell_wmi snd 62064 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer mac_hid 13077 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm coretemp 13269 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141369 0 firewire_ohci 40172 0 sdhci_pci 18324 0 firewire_core 56906 1 firewire_ohci sdhci 28241 1 sdhci_pci crc_itu_t 12627 1 firewire_core lshw *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:a9:54:31 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.117 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0900000-f0903fff *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 logical name: eth0 version: 10 serial: b8:ac:6f:71:02:a6 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:48 memory:f0d00000-f0d0ffff

  Read the article

• Acer aspire 5735z wireless not working after upgrade to 11.10

  - by Jon

  I cant get my wifi card to work at all after upgrading to 11.10 Oneiric. I'm not sure where to start to fix this. Ive tried using the additional drivers tool but this shows that no additional drivers are needed. Before my upgrade I had a drivers working for the Rt2860 chipset. Any help on this would be much appreciated.... thanks Jon jon@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:72:ec:76:d5 inet addr:192.168.1.134 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:72ff:feec:76d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7846 errors:0 dropped:0 overruns:0 frame:0 TX packets:7213 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8046624 (8.0 MB) TX bytes:1329442 (1.3 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:91 errors:0 dropped:0 overruns:0 frame:0 TX packets:91 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34497 (34.4 KB) TX bytes:34497 (34.4 KB) Ive included by dmesg output below [ 0.428818] NET: Registered protocol family 2 [ 0.429003] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.430562] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.436614] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.437409] TCP: Hash tables configured (established 524288 bind 65536) [ 0.437412] TCP reno registered [ 0.437431] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437482] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437678] NET: Registered protocol family 1 [ 0.437705] pci 0000:00:02.0: Boot video device [ 0.437892] PCI: CLS 64 bytes, default 64 [ 0.437916] Simple Boot Flag at 0x57 set to 0x1 [ 0.438294] audit: initializing netlink socket (disabled) [ 0.438309] type=2000 audit(1319243447.432:1): initialized [ 0.440763] Freeing initrd memory: 13416k freed [ 0.468362] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.488192] VFS: Disk quotas dquot_6.5.2 [ 0.488254] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.488888] fuse init (API version 7.16) [ 0.488985] msgmni has been set to 5890 [ 0.489381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.489413] io scheduler noop registered [ 0.489415] io scheduler deadline registered [ 0.489460] io scheduler cfq registered (default) [ 0.489583] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.489633] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.489699] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.489741] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.489800] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.489841] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.489904] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.489944] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.490006] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.490047] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.490126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.490149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.490196] intel_idle: MWAIT substates: 0x1110 [ 0.490198] intel_idle: does not run on family 6 model 15 [ 0.491240] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.493473] ACPI: AC Adapter [ADP1] (on-line) [ 0.493590] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.496771] ACPI: Lid Switch [LID0] [ 0.496818] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.496823] ACPI: Sleep Button [SLPB] [ 0.496865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.496869] ACPI: Power Button [PWRF] [ 0.496900] ACPI: acpi_idle registered with cpuidle [ 0.498719] Monitor-Mwait will be used to enter C-1 state [ 0.498753] Monitor-Mwait will be used to enter C-2 state [ 0.498761] Marking TSC unstable due to TSC halts in idle [ 0.517627] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517630] ACPI: Thermal Zone [TZS0] (67 C) [ 0.524796] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.524799] ACPI: Thermal Zone [TZS1] (67 C) [ 0.524823] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.524852] ERST: Table is not found! [ 0.524948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.680991] ACPI: Battery Slot [BAT0] (battery present) [ 0.688567] Linux agpgart interface v0.103 [ 0.688672] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.688865] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.689786] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.689912] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.691006] brd: module loaded [ 0.691510] loop: module loaded [ 0.691967] Fixed MDIO Bus: probed [ 0.691990] PPP generic driver version 2.4.2 [ 0.692065] tun: Universal TUN/TAP device driver, 1.6 [ 0.692067] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.692146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.692181] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.692206] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.692210] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.692255] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.692289] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.696181] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.696202] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf8904800 [ 0.712014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.712131] hub 1-0:1.0: USB hub found [ 0.712136] hub 1-0:1.0: 6 ports detected [ 0.712230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.712243] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.712247] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.712287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.712315] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.716201] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.716216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8904c00 [ 0.732014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.732130] hub 2-0:1.0: USB hub found [ 0.732135] hub 2-0:1.0: 6 ports detected [ 0.732209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.732223] uhci_hcd: USB Universal Host Controller Interface driver [ 0.732254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.732262] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.732265] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.732298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.732325] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.732441] hub 3-0:1.0: USB hub found [ 0.732445] hub 3-0:1.0: 2 ports detected [ 0.732508] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.732514] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.732518] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.732553] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.732577] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 0.732696] hub 4-0:1.0: USB hub found [ 0.732700] hub 4-0:1.0: 2 ports detected [ 0.732762] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.732768] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.732772] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.732805] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.732829] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.732942] hub 5-0:1.0: USB hub found [ 0.732946] hub 5-0:1.0: 2 ports detected [ 0.733007] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.733014] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.733017] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.733057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.733082] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.733202] hub 6-0:1.0: USB hub found [ 0.733206] hub 6-0:1.0: 2 ports detected [ 0.733265] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.733273] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.733276] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.733313] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.733351] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 0.733466] hub 7-0:1.0: USB hub found [ 0.733470] hub 7-0:1.0: 2 ports detected [ 0.733532] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.733539] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.733542] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.733578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.733610] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.733730] hub 8-0:1.0: USB hub found [ 0.733736] hub 8-0:1.0: 2 ports detected [ 0.733843] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.751594] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.751605] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.751732] mousedev: PS/2 mouse device common for all mice [ 0.752670] rtc_cmos 00:08: RTC can wake from S4 [ 0.752770] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.752796] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.752907] device-mapper: uevent: version 1.0.3 [ 0.752976] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] [ 0.753028] cpuidle: using governor ladder [ 0.753093] cpuidle: using governor menu [ 0.753096] EFI Variables Facility v0.08 2004-May-17 [ 0.753361] TCP cubic registered [ 0.753482] NET: Registered protocol family 10 [ 0.753966] NET: Registered protocol family 17 [ 0.753992] Registering the dns_resolver key type [ 0.754113] PM: Hibernation image not present or could not be loaded. [ 0.754131] registered taskstats version 1 [ 0.771553] Magic number: 15:152:507 [ 0.771667] rtc_cmos 00:08: setting system clock to 2011-10-22 00:30:48 UTC (1319243448) [ 0.772238] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.772240] EDD information not available. [ 0.774165] Freeing unused kernel memory: 984k freed [ 0.774504] Write protecting the kernel read-only data: 10240k [ 0.774755] Freeing unused kernel memory: 20k freed [ 0.775093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.779727] Freeing unused kernel memory: 1400k freed [ 0.801946] udevd[84]: starting version 173 [ 0.880950] sky2: driver version 1.28 [ 0.881046] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.881096] sky2 0000:02:00.0: setting latency timer to 64 [ 0.881197] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 0.881871] sky2 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.896273] sky2 0000:02:00.0: eth0: addr 00:1d:72:ec:76:d5 [ 0.910630] ahci 0000:00:1f.2: version 3.0 [ 0.910647] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.910710] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 0.910775] ahci: SSS flag set, parallel bus scan disabled [ 0.910812] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.910816] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.910821] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.941773] scsi0 : ahci [ 0.941954] scsi1 : ahci [ 0.942038] scsi2 : ahci [ 0.942118] scsi3 : ahci [ 0.942196] scsi4 : ahci [ 0.942268] scsi5 : ahci [ 0.942332] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 46 [ 0.942336] ata2: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904180 irq 46 [ 0.942339] ata3: DUMMY [ 0.942340] ata4: DUMMY [ 0.942344] ata5: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904300 irq 46 [ 0.942347] ata6: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904380 irq 46 [ 1.028061] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.181775] usbcore: registered new interface driver uas [ 1.260062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.261126] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133 [ 1.261129] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.262360] ata1.00: configured for UDMA/133 [ 1.262518] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 [ 1.262716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.262762] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.262824] sd 0:0:0:0: [sda] Write Protect is off [ 1.262827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.262851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287277] sda: sda1 sda2 sda3 [ 1.287693] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.580059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.581188] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.00, max UDMA/100 [ 1.582663] ata2.00: configured for UDMA/100 [ 1.584162] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.00 PQ: 0 ANSI: 5 [ 1.585821] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.585824] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.585953] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.586038] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.632061] usb 6-1: new low speed USB device number 2 using uhci_hcd [ 1.908056] ata5: SATA link down (SStatus 0 SControl 300) [ 2.228065] ata6: SATA link down (SStatus 0 SControl 300) [ 2.228955] Initializing USB Mass Storage driver... [ 2.229052] usbcore: registered new interface driver usb-storage [ 2.229054] USB Mass Storage support registered. [ 2.235827] scsi6 : usb-storage 1-5:1.0 [ 2.235987] usbcore: registered new interface driver ums-realtek [ 2.244451] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 [ 2.244598] generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.244620] usbcore: registered new interface driver usbhid [ 2.244622] usbhid: USB HID core driver [ 3.091083] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 3.238275] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 3.348261] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.351897] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 47.138012] udevd[334]: starting version 173 [ 47.177678] lp: driver loaded but no devices found [ 47.197084] wmi: Mapper loaded [ 47.197526] acer_wmi: Acer Laptop ACPI-WMI Extras [ 47.210227] acer_wmi: Brightness must be controlled by generic video driver [ 47.566578] Disabling lock debugging due to kernel taint [ 47.584050] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 47.620666] type=1400 audit(1319239895.347:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=624 comm="apparmor_parser" [ 47.620934] type=1400 audit(1319239895.347:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser" [ 47.621108] type=1400 audit(1319239895.347:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser" [ 47.633056] [drm] Initialized drm 1.1.0 20060810 [ 47.722594] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 47.722602] i915 0000:00:02.0: setting latency timer to 64 [ 47.807152] ndiswrapper (check_nt_hdr:141): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B [ 47.807159] ndiswrapper (load_sys_files:206): couldn't prepare driver 'rt2860' [ 47.807930] ndiswrapper (load_wrap_driver:108): couldn't load driver rt2860; check system log for messages from 'loadndisdriver' [ 47.856250] usbcore: registered new interface driver ndiswrapper [ 47.861772] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 47.861781] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 47.861783] [drm] Driver supports precise vblank timestamp query. [ 47.861842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 47.980620] fixme: max PWM is zero. [ 48.286153] fbcon: inteldrmfb (fb0) is primary device [ 48.287033] Console: switching to colour frame buffer device 170x48 [ 48.287062] fb0: inteldrmfb frame buffer device [ 48.287064] drm: registered panic notifier [ 48.333883] acpi device:02: registered as cooling_device2 [ 48.334053] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 48.334128] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 48.334203] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 48.334644] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334652] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334673] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 48.334737] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 48.334772] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 48.356107] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k [ 48.380946] hda_codec: ALC268: BIOS auto-probing. [ 48.390242] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 48.390365] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 48.490870] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr [ 48.917990] ppdev: user-space parallel port driver [ 48.950729] type=1400 audit(1319239896.675:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser" [ 48.951114] type=1400 audit(1319239896.675:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser" [ 48.977706] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 [ 49.048871] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 49.078713] sky2 0000:02:00.0: eth0: enabling interface [ 49.079462] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 50.762266] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 50.762702] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.751478] type=1400 audit(1319239902.475:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1039 comm="apparmor_parser" [ 54.755907] type=1400 audit(1319239902.479:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1040 comm="apparmor_parser" [ 54.756237] type=1400 audit(1319239902.483:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1040 comm="apparmor_parser" [ 54.756417] type=1400 audit(1319239902.483:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1040 comm="apparmor_parser" [ 54.764825] type=1400 audit(1319239902.491:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1041 comm="apparmor_parser" [ 54.768365] type=1400 audit(1319239902.495:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1041 comm="apparmor_parser" [ 54.770601] type=1400 audit(1319239902.495:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1041 comm="apparmor_parser" [ 54.770729] type=1400 audit(1319239902.495:14): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1038 comm="apparmor_parser" [ 54.775181] type=1400 audit(1319239902.499:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1043 comm="apparmor_parser" [ 54.775533] type=1400 audit(1319239902.499:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1043 comm="apparmor_parser" [ 54.936691] init: failsafe main process (891) killed by TERM signal [ 54.944583] init: apport pre-start process (1096) terminated with status 1 [ 55.000373] init: apport post-stop process (1160) terminated with status 1 [ 55.005291] init: gdm main process (1159) killed by TERM signal [ 59.782579] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 60.992021] eth0: no IPv6 routers present [ 61.936072] device eth0 entered promiscuous mode [ 62.053949] Bluetooth: Core ver 2.16 [ 62.054005] NET: Registered protocol family 31 [ 62.054007] Bluetooth: HCI device and connection manager initialized [ 62.054010] Bluetooth: HCI socket layer initialized [ 62.054012] Bluetooth: L2CAP socket layer initialized [ 62.054993] Bluetooth: SCO socket layer initialized [ 62.058750] Bluetooth: RFCOMM TTY layer initialized [ 62.058758] Bluetooth: RFCOMM socket layer initialized [ 62.058760] Bluetooth: RFCOMM ver 1.11 [ 62.059428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 62.059432] Bluetooth: BNEP filters: protocol multicast [ 62.460389] init: plymouth-stop pre-start process (1662) terminated with status 1 '

  Read the article

• Windows Azure Service Bus Scatter-Gather Implementation

  - by Alan Smith

  One of the more challenging enterprise integration patterns that developers may wish to implement is the Scatter-Gather pattern. In this article I will show the basic implementation of a scatter-gather pattern using the topic-subscription model of the windows azure service bus. I’ll be using the implementation in demos, and also as a lab in my training courses, and the pattern will also be included in the next release of my free e-book the “Windows Azure Service Bus Developer Guide”. The Scatter-Gather pattern answers the following scenario. How do you maintain the overall message flow when a message needs to be sent to multiple recipients, each of which may send a reply? Use a Scatter-Gather that broadcasts a message to multiple recipients and re-aggregates the responses back into a single message. The Enterprise Integration Patterns website provides a description of the Scatter-Gather pattern here.   The scatter-gather pattern uses a composite of the publish-subscribe channel pattern and the aggregator pattern. The publish-subscribe channel is used to broadcast messages to a number of receivers, and the aggregator is used to gather the response messages and aggregate them together to form a single message. Scatter-Gather Scenario The scenario for this scatter-gather implementation is an application that allows users to answer questions in a poll based voting scenario. A poll manager application will be used to broadcast questions to users, the users will use a voting application that will receive and display the questions and send the votes back to the poll manager. The poll manager application will receive the users’ votes and aggregate them together to display the results. The scenario should be able to scale to support a large number of users.   Scatter-Gather Implementation The diagram below shows the overall architecture for the scatter-gather implementation.       Messaging Entities Looking at the scatter-gather pattern diagram it can be seen that the topic-subscription architecture is well suited for broadcasting a message to a number of subscribers. The poll manager application can send the question messages to a topic, and each voting application can receive the question message on its own subscription. The static limit of 2,000 subscriptions per topic in the current release means that 2,000 voting applications can receive question messages and take part in voting. The vote messages can then be sent to the poll manager application using a queue. The voting applications will send their vote messages to the queue, and the poll manager will receive and process the vote messages. The questions topic and answer queue are created using the Windows Azure Developer Portal. Each instance of the voting application will create its own subscription in the questions topic when it starts, allowing the question messages to be broadcast to all subscribing voting applications. Data Contracts Two simple data contracts will be used to serialize the questions and votes as brokered messages. The code for these is shown below.   [DataContract] public class Question {     [DataMember]     public string QuestionText { get; set; } }     To keep the implementation of the voting functionality simple and focus on the pattern implementation, the users can only vote yes or no to the questions.   [DataContract] public class Vote {     [DataMember]     public string QuestionText { get; set; }       [DataMember]     public bool IsYes { get; set; } }     Poll Manager Application The poll manager application has been implemented as a simple WPF application; the user interface is shown below. A question can be entered in the text box, and sent to the topic by clicking the Add button. The topic and subscriptions used for broadcasting the messages are shown in a TreeView control. The questions that have been broadcast and the resulting votes are shown in a ListView control. When the application is started any existing subscriptions are cleared form the topic, clients are then created for the questions topic and votes queue, along with background workers for receiving and processing the vote messages, and updating the display of subscriptions.   public MainWindow() {     InitializeComponent();       // Create a new results list and data bind it.     Results = new ObservableCollection<Result>();     lsvResults.ItemsSource = Results;       // Create a token provider with the relevant credentials.     TokenProvider credentials =         TokenProvider.CreateSharedSecretTokenProvider         (AccountDetails.Name, AccountDetails.Key);       // Create a URI for the serivce bus.     Uri serviceBusUri = ServiceBusEnvironment.CreateServiceUri         ("sb", AccountDetails.Namespace, string.Empty);       // Clear out any old subscriptions.     NamespaceManager = new NamespaceManager(serviceBusUri, credentials);     IEnumerable<SubscriptionDescription> subs =         NamespaceManager.GetSubscriptions(AccountDetails.ScatterGatherTopic);     foreach (SubscriptionDescription sub in subs)     {         NamespaceManager.DeleteSubscription(sub.TopicPath, sub.Name);     }       // Create the MessagingFactory     MessagingFactory factory = MessagingFactory.Create(serviceBusUri, credentials);       // Create the topic and queue clients.     ScatterGatherTopicClient =         factory.CreateTopicClient(AccountDetails.ScatterGatherTopic);     ScatterGatherQueueClient =         factory.CreateQueueClient(AccountDetails.ScatterGatherQueue);       // Start the background worker threads.     VotesBackgroundWorker = new BackgroundWorker();     VotesBackgroundWorker.DoWork += new DoWorkEventHandler(ReceiveMessages);     VotesBackgroundWorker.RunWorkerAsync();       SubscriptionsBackgroundWorker = new BackgroundWorker();     SubscriptionsBackgroundWorker.DoWork += new DoWorkEventHandler(UpdateSubscriptions);     SubscriptionsBackgroundWorker.RunWorkerAsync(); }     When the poll manager user nters a question in the text box and clicks the Add button a question message is created and sent to the topic. This message will be broadcast to all the subscribing voting applications. An instance of the Result class is also created to keep track of the votes cast, this is then added to an observable collection named Results, which is data-bound to the ListView control.   private void btnAddQuestion_Click(object sender, RoutedEventArgs e) {     // Create a new result for recording votes.     Result result = new Result()     {         Question = txtQuestion.Text     };     Results.Add(result);       // Send the question to the topic     Question question = new Question()     {         QuestionText = result.Question     };     BrokeredMessage msg = new BrokeredMessage(question);     ScatterGatherTopicClient.Send(msg);       txtQuestion.Text = ""; }     The Results class is implemented as follows.   public class Result : INotifyPropertyChanged {     public string Question { get; set; }       private int m_YesVotes;     private int m_NoVotes;       public event PropertyChangedEventHandler PropertyChanged;       public int YesVotes     {         get { return m_YesVotes; }         set         {             m_YesVotes = value;             NotifyPropertyChanged("YesVotes");         }     }       public int NoVotes     {         get { return m_NoVotes; }         set         {             m_NoVotes = value;             NotifyPropertyChanged("NoVotes");         }     }       private void NotifyPropertyChanged(string prop)     {         if(PropertyChanged != null)         {             PropertyChanged(this, new PropertyChangedEventArgs(prop));         }     } }     The INotifyPropertyChanged interface is implemented so that changes to the number of yes and no votes will be updated in the ListView control. Receiving the vote messages from the voting applications is done asynchronously, using a background worker thread.   // This runs on a background worker. private void ReceiveMessages(object sender, DoWorkEventArgs e) {     while (true)     {         // Receive a vote message from the queue         BrokeredMessage msg = ScatterGatherQueueClient.Receive();         if (msg != null)         {             // Deserialize the message.             Vote vote = msg.GetBody<Vote>();               // Update the results.             foreach (Result result in Results)             {                 if (result.Question.Equals(vote.QuestionText))                 {                     if (vote.IsYes)                     {                         result.YesVotes++;                     }                     else                     {                         result.NoVotes++;                     }                     break;                 }             }               // Mark the message as complete.             msg.Complete();         }       } }     When a vote message is received, the result that matches the vote question is updated with the vote from the user. The message is then marked as complete. A second background thread is used to update the display of subscriptions in the TreeView, with a dispatcher used to update the user interface. // This runs on a background worker. private void UpdateSubscriptions(object sender, DoWorkEventArgs e) {     while (true)     {         // Get a list of subscriptions.         IEnumerable<SubscriptionDescription> subscriptions =             NamespaceManager.GetSubscriptions(AccountDetails.ScatterGatherTopic);           // Update the user interface.         SimpleDelegate setQuestion = delegate()         {             trvSubscriptions.Items.Clear();             TreeViewItem topicItem = new TreeViewItem()             {                 Header = AccountDetails.ScatterGatherTopic             };               foreach (SubscriptionDescription subscription in subscriptions)             {                 TreeViewItem subscriptionItem = new TreeViewItem()                 {                     Header = subscription.Name                 };                 topicItem.Items.Add(subscriptionItem);             }             trvSubscriptions.Items.Add(topicItem);               topicItem.ExpandSubtree();         };         this.Dispatcher.BeginInvoke(DispatcherPriority.Send, setQuestion);           Thread.Sleep(3000);     } }       Voting Application The voting application is implemented as another WPF application. This one is more basic, and allows the user to vote “Yes” or “No” for the questions sent by the poll manager application. The user interface for that application is shown below. When an instance of the voting application is created it will create a subscription in the questions topic using a GUID as the subscription name. The application can then receive copies of every question message that is sent to the topic. Clients for the new subscription and the votes queue are created, along with a background worker to receive the question messages. The voting application is set to receiving mode, meaning it is ready to receive a question message from the subscription.   public MainWindow() {     InitializeComponent();       // Set the mode to receiving.     IsReceiving = true;       // Create a token provider with the relevant credentials.     TokenProvider credentials =         TokenProvider.CreateSharedSecretTokenProvider         (AccountDetails.Name, AccountDetails.Key);       // Create a URI for the serivce bus.     Uri serviceBusUri = ServiceBusEnvironment.CreateServiceUri         ("sb", AccountDetails.Namespace, string.Empty);       // Create the MessagingFactory     MessagingFactory factory = MessagingFactory.Create(serviceBusUri, credentials);       // Create a subcription for this instance     NamespaceManager mgr = new NamespaceManager(serviceBusUri, credentials);     string subscriptionName = Guid.NewGuid().ToString();     mgr.CreateSubscription(AccountDetails.ScatterGatherTopic, subscriptionName);       // Create the subscription and queue clients.     ScatterGatherSubscriptionClient = factory.CreateSubscriptionClient         (AccountDetails.ScatterGatherTopic, subscriptionName);     ScatterGatherQueueClient =         factory.CreateQueueClient(AccountDetails.ScatterGatherQueue);       // Start the background worker thread.     BackgroundWorker = new BackgroundWorker();     BackgroundWorker.DoWork += new DoWorkEventHandler(ReceiveMessages);     BackgroundWorker.RunWorkerAsync(); }     I took the inspiration for creating the subscriptions in the voting application from the chat application that uses topics and subscriptions blogged by Ovais Akhter here. The method that receives the question messages runs on a background thread. If the application is in receive mode, a question message will be received from the subscription, the question will be displayed in the user interface, the voting buttons enabled, and IsReceiving set to false to prevent more questing from being received before the current one is answered.   // This runs on a background worker. private void ReceiveMessages(object sender, DoWorkEventArgs e) {     while (true)     {         if (IsReceiving)         {             // Receive a question message from the topic.             BrokeredMessage msg = ScatterGatherSubscriptionClient.Receive();             if (msg != null)             {                 // Deserialize the message.                 Question question = msg.GetBody<Question>();                   // Update the user interface.                 SimpleDelegate setQuestion = delegate()                 {                     lblQuestion.Content = question.QuestionText;                     btnYes.IsEnabled = true;                     btnNo.IsEnabled = true;                 };                 this.Dispatcher.BeginInvoke(DispatcherPriority.Send, setQuestion);                 IsReceiving = false;                   // Mark the message as complete.                 msg.Complete();             }         }         else         {             Thread.Sleep(1000);         }     } }     When the user clicks on the Yes or No button, the btnVote_Click method is called. This will create a new Vote data contract with the appropriate question and answer and send the message to the poll manager application using the votes queue. The user voting buttons are then disabled, the question text cleared, and the IsReceiving flag set to true to allow a new message to be received.   private void btnVote_Click(object sender, RoutedEventArgs e) {     // Create a new vote.     Vote vote = new Vote()     {         QuestionText = (string)lblQuestion.Content,         IsYes = ((sender as Button).Content as string).Equals("Yes")     };       // Send the vote message.     BrokeredMessage msg = new BrokeredMessage(vote);     ScatterGatherQueueClient.Send(msg);       // Update the user interface.     lblQuestion.Content = "";     btnYes.IsEnabled = false;     btnNo.IsEnabled = false;     IsReceiving = true; }     Testing the Application In order to test the application, an instance of the poll manager application is started; the user interface is shown below. As no instances of the voting application have been created there are no subscriptions present in the topic. When an instance of the voting application is created the subscription will be displayed in the poll manager. Now that a voting application is subscribing, a questing can be sent from the poll manager application. When the message is sent to the topic, the voting application will receive the message and display the question. The voter can then answer the question by clicking on the appropriate button. The results of the vote are updated in the poll manager application. When two more instances of the voting application are created, the poll manager will display the new subscriptions. More questions can then be broadcast to the voting applications. As the question messages are queued up in the subscription for each voting application, the users can answer the questions in their own time. The vote messages will be received by the poll manager application and aggregated to display the results. The screenshots of the applications part way through voting are shown below. The messages for each voting application are queued up in sequence on the voting application subscriptions, allowing the questions to be answered at different speeds by the voters.

  Read the article

• Apache, Nginx, WSGI, django cookies get lost.

  - by Jack M.

  I'm running into a problem trying to get a Django application running in my staging environment. I'm running nginx as a reverse proxy with Apache 2.2/mod_wsgi as the target, and my Django app behind that. The problem is that the cookies are getting lost somewhere between nginx and Apache. My nginx.conf (ripped out a few locations to keep it small): http { gzip on; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass_header Set-Cookie; upstream django { server 127.0.0.1:8080; } server { listen 80; server_name encendio.iigins.com; location / { proxy_pass http://django; } } } My Apache vhosts file: <VirtualHost *:8080> ServerName encendio.test.com ServerAdmin [email protected] DocumentRoot "/usr/local/www/apache22/data" WSGIScriptAlias / /usr/local/www/apache22/data/sasquatch/wsgi_handler.py </VirtualHost> If I directly to http://encendio.test.com:8080/ the cookies work and I can log into the admin area. If I log into http://encendio.test.com/, the admin area tells me my browser isn't using cookies. Now things get kind of weird. I went so far as to look at the environ being passed into my wsgi_handler.py: _application = django.core.handlers.wsgi.WSGIHandler() def application(environ, start_response): print >> sys.stderr, environ.get('HTTP_COOKIE', "No Cookie") return _application(environ, start_response) It shows the cookie existing in the environment: [Mon Mar 22 12:15:50 2010] [error] csrftoken=9f2569elkj67984242f0e7a6dea0b791; sessionid=4e5432hjkds8603f26d5ffa02b10cd27 And this cookie matches up with what I see in nginx's log if I plug in $http_cookie on the end of the log. So Apache is getting the cookie in some form, but it's not ending up where Django can see it. I'm at my wit's end for why this isn't working, so any help is greatly appreciated. Ninja Edit: I forgot to mention that Firefox is seeing the cookies. The oddity is that every time I attempt to log in, I get a new sessionid.

  Read the article

• Integer Overflow in VBA project

  - by mcoolbeth

  Hi, everyone. Here is a small VBA (Excel) function that i wrote, full of MsgBoxes for debugging. I am passing in the numbers 10 and 1 as arguments, and getting an overflow error when the program reaches the top of the For loop, before it begins the first iteration. Any thoughts are appreciated. Function PerformanceTest(iterations As Integer, interval As Integer) As Double Dim st, tot, k As Double Dim n As Integer tot = 0# MsgBox "ok" k = iterations + tot MsgBox "ookk" n = 1 MsgBox "assigned" For n = 1 To iterations MsgBox n st = Timer Application.Calculate tot = tot + (Timer - st) Sleep (1000 * interval) Next n 'MsgBox (tot / k) PerformancTest = tot / k End Function

  Read the article

• Updating a progress bar while wpf data binding is taking place (in c#)

  - by evan

  I bind a large dataset to a WPF list box which can take a long time (more than ten seconds). While the the data is being bound I'd like to display a circular progress bar I can't get the progress bar to show while the data binding is occurring, even though I am trying to do the binding in a backgroundworker. I tested it by making the first line of the backgroundworkd's dowork event a Thread.Sleep(5000) and sure enough the progress bar started spinning for that duration only to freeze while when the binding started. Is this because both the databinding and the UI updating have to occur on the same thread? Any ideas on how to work around it? Thanks for your help!!

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >